Answer:
B
Explanation:
The boiling point of water increases when a solute is dissolved in the water. The amount by which the boiling point is raised depends on the number of solute particles in the water.
For equal molar quantities of Epsom salt, potassium sulfide, sodium chloride, and sugar are, potassium sulfide yields the most particles.
K₂S dissociates as follows:
K₂S ⇒ 2K⁺ + S²⁻
One mole of K₂S yields 3 moles of particles.
Epsom salt (MgSO₄) yields 2 moles of particles for every mole:
MgSO₄ ⇒ Mg²⁺ + SO₄²⁻
Sodium chloride (NaCl) also yields 2 moles of particles for every mole:
NaCl ⇒ Na⁺ + Cl⁻
Sugar is not an electrolyte and does not dissociate, so 1 mole of sugar produces 1 mole of solute particles.
Answer:
Potassium sulfide (K2S)
Explanation:
Answer via Founder's Education/Educere
Carbon dioxide: is removed from the atmosphere by photosynthesis. comprises up to two percent of the atmospheric gases. is being removed from the atmosphere faster than it is being inputted. is not present in significant amounts in the atmosphere of Venus.
Answer:
Is removed from the atmosphere by photosynthesis.
Explanation:
The carbon dioxide (CO2) is presented in the atmosphere and its cycle began with it's incoming by respiration, combustion of fuels and decomposition. The autotrophs, which realize photosynthesis, use CO2 as fuel to produce their food with Sun rays.
The CO2 comprises about 0.3% of the atmospheric gases, and in the past few years, its input is being higher than its removal of the atmosphere, which is aggravating the greenhouse effect. Besides, the atmosphere of Venus has higher levels of CO2.
Which of the following is not a chemical property of a substance?
- turns green when dissolved in water
- produces white flame when exposed to oxygen
- gives off brown fumes when treated with nitric acid
- conducts electricity
- reacts with chlorine
Answer:
First of all you need to know that chemical properties are those who are determined by chemical tests and are related to the reactivity of chemical substances. In those statements you have 4 reactions, except on "conducts electricity". That is a physical property.
Explanation:
A chemical reaction is a way in which the atoms of the elements regroup to form new substances.
Final answer:
Conducts electricity is a physical property and not a chemical property. Chemical properties are those that can only be observed when a substance undergoes a chemical change to become a different substance.
Explanation:
Among the options provided, the only feature that is not a chemical property is conducts electricity, as this is a physical property related to the substance's ability to allow the passage of electric current, which can be observed without changing the identity of the substance. Chemical properties, on the other hand, involve the substance's ability to undergo a chemical change. For example, reacting with oxygen to produce a white flame, turning green when dissolved in water, giving off brown fumes when treated with nitric acid, and reacting with chlorine are all indicative of chemical changes because they result in the formation of new substances with different compositions.
At 25 ∘C25 ∘C,the equilibrium partial pressures for the reaction 3A(g)+2B(g)↽−−⇀C(g)+2D(g) 3A(g)+2B(g)↽−−⇀C(g)+2D(g) were found to be PA=5.84PA=5.84 atm, PB=4.47PB=4.47 atm, PC=4.17PC=4.17 atm, and PD=4.32PD=4.32 atm. What is the standard change in Gibbs free energy of this reaction at 25 ∘C25 ∘C ?
Answer:
9742.37 J/mol
Explanation:
We follow the expression for Gibbs free energy:
[tex]\Delta G=\Delta G^{o}+RTlnQ[/tex]
First we calculate Q with the following expression for the reaction:
[tex]aA+bB \rightleftharpoons cC+dD[/tex]
[tex]Q=\frac{P_{C}^{c}P_{D}^{d}}{P_{A}^{a}P_{B}^{b}}[/tex]
Therefore, Q=0.0196
Now we continue with the first equation, and as we are on equilibrium, we know that the Gibbs free energy is zero, therefore:
[tex]0=\Delta G^{o}+RTlnQ\\\\\Delta G^{o}=-RTlnQ\\\\R=8.314J/molK\\\\T=298 K\\\\\Delta G^{o}=+9742.37J/mol[/tex]
The standard change in Gibbs free energy of the given reaction at 25°C can be calculated by first determining the equilibrium constant, K, based on the given partial pressures of the substances and then applying the formula ΔG° = -RT ln K, where R is the ideal gas constant and T is the temperature in Kelvin.
Explanation:To calculate the standard change in Gibbs free energy of the reaction at 25 °C, we need to take into account the partial pressures of all the substances in the reaction. In this case, the equilibrium constant (K) can be determined as K=(PC*PD^2)/(PA^3*PB^2). After calculating K, we can use the relation for Gibbs free energy change: ΔG° = -RT ln K, with R being the ideal gas constant (8.314 J/(K*mol)) and T being the temperature in Kelvin (273K for 25°C).
Remember that in this context, the equation ΔG = ΔG° + RT ln Q where Q represents the ratio of the initial concentrations of products and reactants. In equilibrium, Q equals K, and ΔG equals to 0, simplifying our calculation.
We can substitute the calculated value of K into the equation to find the standard change in Gibbs free energy. Note that a negative value of ΔG° indicates a spontaneous reaction while a positive value indicates a nonspontaneous reaction at room temperature.
Learn more about Gibbs free energy here:https://brainly.com/question/13318988
#SPJ3
Which statement is part of the kinetic molecular theory? A. Gas particles are in constant motion. B. Gas particles attract each other. C. Gas particles lose their energy during collisions. D. Gas particles stick to the walls of their container.
Answer:
The answer to your question is: letter A
Explanation:
A. Gas particles are in constant motion. This statement is true because this theory says that Gases are composed of a large number of particles that behave like hard, spherical objects in a state of constant, random motion.
B. Gas particles attract each other. This statement is false because this theory says that there is no force of attraction between gas particles or between the particles and the walls of the container.
C. Gas particles lose their energy during collisions. This statement is false, this theory says that none of the energy of a gas particle is lost when it collides with another particle or with the walls of the container.
D. Gas particles stick to the walls of their container. This statement is false, the theory says that there is no force of attraction between gas particles or between the particles and the walls of the container.
The vapor pressure of carbon tetrachloride, CCl₄, is 0.354 atm and the vapor pressure of chloroform, CHCl₃, is 0.526 atm at 316 K. A solution is prepared from equal masses of these two compounds at this temperature.a) Calculate the mole fraction of the chloroform in the vapor above the solution.b) If the vapor above the original solution is condensed and isolated into a separate flask, what would the vapor pressure of chloroform be above this new solution?
Answer:
a) 0.65
b) 0.342 atm
Explanation:
a) First, we need to know the molar mass of the compounds. By periodic table, the molar mass of the elements are:
C = 12 g/mol; Cl = 35.5 g/mol; H = 1 g/mol. So:
CCl4 = 12 + 4x35.5 = 154 g/mol
CHCl3 = 12 + 1 + 3x35.5 = 119.5 g/mol
They both have the same mass, so we can choose the basis of calculus as 100 g (you can choose any other basis, the result will be the same because the fraction will be the same!)
The number of moles is :
n = mass/molar mass
nCCl4 = 100/154 = 0.649 mol
nCHCl3 = 100/119.5 = 0.837 mol
So, the total number of moles is nt = nCCl4 + nCHCl3 = 1.486
Then, the molar fractions in the solution will be:
xCHCl3 = nCHCl3/nt = 0.837/1.486 = 0.56
xCCl4 = 1 - 0.56 = 0.44
By Dalton's Law
Pt = PCCl4*xCCl4 + PCHCl3*xCHCl3
Where Pt is the total pressure of the vapor, and PCCl4 and PCHCl3 are the vapor pressure of the compounds. So:
Pt = 0.44*0.354 + 0.56*0.526 = 0.451 atm
The molar fraction of the vapor will be:
yCHCl3 = (xCHCl3*PCHCl3)/Pt
yCHCl3 = (0.56*0.526)/0.451 = 0.65
b) When the vapor is condensed, the molar fraction of the vapor phase will be the molar fraction of the solution, so xCHCl3 = 0.65
P = molar fraction x vapor pressure
P = 0.65 x 0.526
P = 0.342 atm
The mole fraction of CHCl₃ in the vapor above the solution is equal to 0.65.
Given the following data:
Vapor pressure of CCl₄ = 0.354 atm.
Vapor pressure of CHCl₃ = 0.526 atm.
Scientific data:
Molar mass of CCl₄ = 154 g/mol.
Molar mass of CHCl₃ = 119.5 g/mol.
Next, we would determine the number of moles for each compound:
Note: Assume a mass of 100 grams.
Mathematically, the number of moles contained in a chemical compound is given by this formula:
[tex]Number \;of \;moles = \frac {mass}{molar\;mass}\\\\Number \;of \;moles = \frac {100}{154}[/tex]
Number of moles of CCl₄ = 0.649 mol.
For CHCl₃:
[tex]Number \;of \;moles = \frac {mass}{molar\;mass}\\\\Number \;of \;moles = \frac {100}{119.5}[/tex]
Number of moles of CHCl₃ = 0.837 mol.
The total number of moles = 0.649 + 0.837 = 1.486 mol.
For the mole fraction of CCl₄, we have:
[tex]M_f = \frac{0.649}{1.486} \\\\[/tex]
Mole fraction = 0.44.
For CHCl₃, we have:
Mole fraction = 1 - 0.44 = 0.56.
Next, we would determine the total pressure of the two compounds by applying Dalton's law:
Total pressure = 0.56 × 0.526 + 0.44 × 0.354
Total pressure = 0.451 atm.
Now, we can determine the mole fraction of CHCl₃ in the vapor above the solution:
[tex]Mole \;fraction = \frac{0.56 \times 0.526}{0.451}[/tex]
Mole fraction = 0.65.
How to calculate the vapor pressure of CHCl₃.Vp = molar fraction × vapor pressure
Vp = 0.65 × 0.526
Vp = 0.342 atm.
Read more on pressure here: https://brainly.com/question/24827501
A peptide bond Question
A. is a covalent bond between the functional R groups of adjacent amino acids.
B. is a covalent bond between the NH group of one polypeptide and the CO group of an adjacent polypeptide that holds together multimeric proteins.
C. is a covalent bond between the carboxyl carbon of one amino acid and the amino nitrogen of a second amino acid.
D. is a covalent bond between adjacent glucose molecules in a peptide. a noncovalent bond that dictates the tertiary structure of a protein.
Answer:
C. is a covalent bond between the carboxyl carbon of one amino acid and the amino nitrogen of a second amino acid.
A peptide bond is a covalent bond between the carboxyl carbon of one amino acid and the amino nitrogen of a second amino acid. Therefore, the correct option is option C.
What is peptide bond?A peptide bond, also known as a eupeptide bond, is a chemical connection produced by attaching one amino acid's carboxyl group towards the substituent of the other.
A peptide bond is a form of covalent chemical link that is amide in nature. A peptide bond is a covalent bond between the carboxyl carbon of one amino acid and the amino nitrogen of a second amino acid.
Therefore, a peptide bond is a covalent bond between the carboxyl carbon of one amino acid and the amino nitrogen of a second amino acid. The correct option is option C among all the given options.
To know more about peptide bond, here:
https://brainly.com/question/11559138
#SPJ2
Gaseous hydrogen iodide is placed in a closed container at 425°C, where it partially decomposes to hydrogen and iodine: 2HI(g)⇌H₂(g)+I₂(g) At equilibrium it is found that [HI]= 3.51×10⁻³ M, [H₂]= 4.76×10⁻⁴ M, and [I₂]= 4.76×10⁻⁴ M.
What is the value of [tex]K_c[/tex] at this temperature? Express the equilibrium constant to three significant digits.
Answer : The value of [tex]K_c[/tex] at this temperature is 0.0184
Explanation : Given,
Concentration of [tex]HI[/tex] at equilibrium = [tex]3.51\times 10^{-3}M[/tex]
Concentration of [tex]H_2[/tex] at equilibrium = [tex]4.76\times 10^{-4}M[/tex]
Concentration of [tex]I_2[/tex] at equilibrium = [tex]4.76\times 10^{-4}M[/tex]
The given equilibrium reaction is,
[tex]2HI(g)\rightleftharpoons H_2(g)+I_2(g)[/tex]
The expression of [tex]Kc[/tex] will be,
[tex]K_c=\frac{[H_2][I_2]}{[HI]^2}[/tex]
Now put all the given values in this expression, we get:
[tex]K_c=\frac{(4.76\times 10^{-4})\times (4.76\times 10^{-4})}{(3.51\times 10^{-3})^2}[/tex]
[tex]K_c=0.0184[/tex]
Therefore, the value of [tex]K_c[/tex] at this temperature is 0.0184
Final answer:
The equilibrium constant, Kc, for the decomposition of gaseous hydrogen iodide into hydrogen and iodine at 425°C, given the concentrations at equilibrium, is calculated as 1.84×10⁻².
Explanation:
The question asks about the calculation of the equilibrium constant, Kc, for the decomposition of hydrogen iodide into hydrogen and iodine at 425°C. The provided concentrations at equilibrium are [HI] = 3.51×10⁻³ M, [H₂]= 4.76×10⁻⁴ M, and [I₂]= 4.76×10⁻⁴ M.
To find Kc, we use the expression Kc = [H₂][I₂]/[HI]². Plugging in the given values:
Kc = (4.76×10⁻⁴ M)×(4.76×10⁻⁴ M) / (3.51×10⁻³ M)²
Kc = (2.26×10⁻⁷ M²) / (1.23×10⁻⁵ M²)
Kc = 1.84×10⁻²
To express Kc to three significant digits, Kc = 1.84×10⁻².
What information do the coefficients in a balanced chemical equation tell you?
the amount of energy from the products
the ratios of the number of moles of each substance that react and that are produced
the physical states of the compounds reacting
the elements involved in the reaction
Answer:
The correct answer to your question is the second option
Explanation:
The amount of energy from the products This option is not correct because in a chemical reaction the energy given off or absorved is written at the end of the reaction, it is not a coefficient.
The ratios of the number of moles of each substance that react and that are produced This option is correct, coefficients tell the number of moles of each substance in a reaction.
The physical states of the compounds reacting Physical states are written next to the molecule and using parenthesis. Incorrect
The elements involved in the reaction Incorrect because elements are written with symbols not with coefficients.
Final answer:
The coefficients in a balanced chemical equation represent the molar ratios of reactants and products in a chemical reaction, which are essential for stoichiometric calculations and ensure adherence to the Law of Conservation of Mass.
Explanation:
The coefficients in a balanced chemical equation tell us the ratios of the number of moles of each substance that react and that are produced during the chemical reaction. These coefficients indicate the relative amounts of reactants and products in a reaction and are used in stoichiometry to determine the quantities of one substance that will react with or produce a given amount of another substance.
Stoichiometry is the study of the numerical relationships between the reactants and the products in balanced chemical reactions. The coefficients in a balanced chemical equation also respect the Law of Conservation of Mass, ensuring that the number of atoms of each element is equal on both the reactant and product sides of the equation. These ratios are referred to as stoichiometric factors and are critical in performing quantitative chemical calculations.
!!!Need answer for chem homework ASAP PLS !!!!
The enthalpy of vaporization of Substance X is 16.0kJ mol and its normal boiling point is −43.°C. Calculate the vapor pressure of X at −89.°C. Round your answer to 2 significant digits.
Answer:
The vapor pressure of X at [tex]- 89^{\circ}[/tex] = 0.12 atm
Given:
[tex]\Delta H_{v} = 16.0 kJ mol[/tex]
Normal boiling point, T = [tex]- 43^{\circ}C = 230 K[/tex]
T' = [tex]- 89^{\circ}C = 184 K[/tex]
Solution:
At boiling point, vapor pressure = atmospheric pressure
Thus at T, P = 1 atm
Now, to calculate vapor pressure, P' at T' = 184 K, we use:
[tex]log_{10}\frac{P'}{P} = \frac{\Delta H_{v}}{R2.303}\frac{T' - T}{T'T}[/tex]
where
R = Rydberg's constant = 8.314 J/mol.K
Putting the values in the above formula:
[tex]log_{10}\frac{P'}{1} = \frac{16.0\times 1000}{8.314\times 2.303}\frac{184 - 230}{184\times 230}[/tex]
[tex]log_{10}{P'}= - 0.9083[/tex]
[tex]P'= 10^{- 0.9083} = 0.12 atm[/tex]
Vapor pressure of Substance X at -89°C is calculated by using the Clausius-Clapeyron equation along with the given enthalpy of vaporization and the normal boiling point. The equation is rearranged to a linear form to solve for the vapor pressure.
Explanation:To calculate the vapor pressure of Substance X at -89°C using the enthalpy of vaporization and normal boiling point, we use the Clausius-Clapeyron equation. This equation is: P = Ae¯^Hvap/RT, where AHvap is the enthalpy of vaporization for the substance, R is the gas constant, and A is a constant whose value depends on the substance. Temperature T must be in Kelvin for this equation. In this case, the enthalpy of vaporization of Substance X is 16.0kJ mol and its normal boiling point is −43.°C.
This equation can be rearranged into logarithmic form to obtain a linear equation: Hvap + lnA = RT. If we know the vapor pressure at one temperature (T₁, P₁) and want to find the vapor pressure at another temperature (T₂), we can use these values to find A and subsequently calculate the vapor pressure at T₂.
Keep in mind that the normal boiling point is the temperature at which the vapor pressure equals atmospheric pressure at sea level, so this allows us to know one vapor pressure-temperature value.
Learn more about Vapor Pressure Calculation here:https://brainly.com/question/29587694
#SPJ3
What must break in order for water to change from solid to liquid to gas?
a. covalent bonds between water molecules
b. ionic bonds within water molecules
c. hydrogen bonds within water molecules
d. hydrogen bonds between water molecules
e. covalent bonds within water molecules
Hydrogen bonds between water molecules must break for water to change from solid to liquid to gas.
Explanation:In order for water to change from solid to liquid to gas, the hydrogen bonds between water molecules must break. These hydrogen bonds are weaker than covalent or ionic bonds and are constantly forming and breaking in liquid water. When the heat is increased, the higher kinetic energy of the water molecules causes the hydrogen bonds to break completely, allowing water molecules to escape into the air as gas. On the other hand, when water is cooled and freezes, the water molecules form a crystalline structure maintained by hydrogen bonding, making ice less dense than liquid water.
A chemistry student needs 60.00 g of butanoic acid for an experiment. He has available 120. g of a 36.9% w/w solution of butanoic acid in ethanol. Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button.
Answer: There is no solution for the required amount of butanoic acid.
Explanation:
We are given:
Mass of butanoic acid needed = 60.00 grams
36.9 % w/w butanoic acid solution
This means that 36.9 grams of butanoic acid is present in 100 grams of solution
Applying unitary method:
If 36.9 grams of butanoic acid is present in 100 grams of solution
So, 60.00 grams of butanoic acid will be present in = [tex]\frac{100}{36.9}\times 60.00=162.6g[/tex]
As, the given amount of solution is less than the required amount.
Hence, there is no solution for the required amount of butanoic acid.
Final answer:
To obtain 60.00 g of butanoic acid from a 36.9% w/w solution, 162.6 g of the solution is needed. The student has only 120 g available, which is insufficient.
Explanation:
To determine how much of the 36.9% w/w butanoic acid solution is needed to obtain 60.00 g of butanoic acid, we use the percentage concentration to set up a calculation. The 36.9% w/w solution means that for every 100 g of solution, there are 36.9 g of butanoic acid. Therefore, to find the mass of the solution needed for 60.00 g of butanoic acid, we can use the equation:
Mass of solution = (Mass of butanoic acid)/(Percentage of butanoic acid by mass) × 100
This yields:
Mass of solution = (60.00 g)/(0.369) × 100 = 162.6 g
Since the student has 120 g of the solution available, which is less than the 162.6 g required, there is not enough solution to obtain 60.00 g of butanoic acid.
A certain substance has a mass per mole of 47 g/mol. When 312 J is added as heat to a 34.0 g sample, the sample's temperature rises from 24.0°C to 44.0°C. What are the (a) specific heat and (b) molar specific heat of this substance? (c) How many moles are present?
Answer:
(a) 0.459 Jg⁻¹°C⁻¹
(b) 22 Jmol⁻¹°C⁻¹
(c) 0.72 moles
Explanation:
(a) The specific heat capacity can be calculated using the following equation:
Q = mcΔt, where Q is the heat energy, m is the mass, c is the specific heat capacity, and Δt is the temperature change from initial to final.
Rearranging the equation to solve for c gives:
c = Q / (mΔt) = (312J) / ((34.0g)(44.0°C - 24°C) = 0.459 Jg⁻¹°C⁻¹
(b) To find the molar specific heat, grams in the above result must be converted to moles using the mass per mole:
(0.459 Jg⁻¹°C⁻¹)(47g/mol) = 22 Jmol⁻¹°C⁻¹
(c) The numer of moles present are found by converting grams to moles using the mas per mole:
(34.0g)(mol/47g) = 0.72 moles
A substance that forms a vapor is generally in what physical state at room temperature?
Mark the True statement In carbon containing compounds, carbon usually forms four bonds, nitrogen usually forms three bonds, oxygen usually forms two bonds, and hydrogen only forms one bond. In carbon containing compounds, carbon usually forms four bonds, nitrogen usually forms five bonds, oxygen usually forms six bonds, and hydrogen only forms one bond. In carbon containing compounds, carbon usually forms four bonds, nitrogen and oxygen usually form two bonds, and hydrogen only forms one bond. In carbon containing compounds, carbon usually forms three bonds, nitrogen and oxygen usually form two bonds, and hydrogen only forms one bond]
Answer:
In carbon containing compounds, carbon usually forms four bonds, nitrogen usually forms three bonds, oxygen usually forms two bonds, and hydrogen only forms one bond.
Explanation:
In organic compounds in which carbon is present, the number of bonds formed depend on the number of electrons available for each chemical element. In the case of Carbon, it is 4. Nitrogen is 3. Oxygen is 2. Hydrogen is 1. In other types of compounds, it is possible to see different types of bonds.
Please help! I'd appreciate it a lot!
Answer:
6 is B, 7 is A
Explanation:
Anna is 100 lb and will be infused with 125 mg dobutamine in 500 ml NS at 10 mcg/kg/min. How many milligrams of dobutamine will she receives/ hour? Your answer is in mg/h.
Answer:
27.216 mg/h.
Explanation:
First you need to convert 100 lb to kg, and there are 45.36 kg, she will receive 10 mcg/kg/min so if you multiply it by 45.36 kg, she will receive 453.6 mcg/min, so in one hour (60 minutes) she will receive 27216 mcg/h, 1000 mcg are 1 mg, so she will receive 27.216 mg/h.
PLEASE HELP IM SO CONFUSED
1. Identify the SI unit(s) that would be most appropriate for measuring each of the following:
A) the length of a new pencil (cm)
B) the width of your classroom (dam)
C) the length of your arm (m)
D) the diameter of pencil lead (μm)
2. Identify the SI unit(s) that would be most appropriate for massing each of the following:
A) a person (m)
B) a banana (
C) your daily vitamin tablet (
D) a pencil (cm)
3. Identify the SI unit(s) that would be most appropriate for measuring each of the following:
A) a glass of milk
B) the amount of water required to fill a glass of water (
(C) a dose of cough syrup (
(D) a truckload of sand
4. Rank the measurements within each set from largest to smallest:
(A) 1.2m, 750cm, .005km, 65dm, and 2000mm
B) 450mg, 3.8cg, .27dg, .50g, and .00047kg
c.) 2.5L, 22cL, 13dL, 870mL, and 175cm3
Answer:
1. Identify the SI unit(s) that would be most appropriate for measuring each of the following:
A) the length of a new pencil (cm)
B) the width of your classroom (m)
C) the length of your arm (cm)
D) the diameter of pencil lead (mm)
2. Identify the SI unit(s) that would be most appropriate for massing each of the following:
A) a person (kg)
B) a banana ( g)
C) your daily vitamin tablet (mg)
D) a pencil (g)
3. Identify the SI unit(s) that would be most appropriate for measuring each of the following:
A) a glass of milk (mL)
B) the amount of water required to fill a glass of water (mL)
(C) a dose of cough syrup (mL)
(D) a truckload of sand (m³)
4. Rank the measurements within each set from largest to smallest:
(A) 1.2m, 750cm, 0.005km, 65dm, and 2000mm
65 dm, 750 cm, 0.005km, 2000 mm; 1.2 m
B) 450mg, 3.8cg, 0.27dg, 0.50g, and 0.00047kg
0.27 dg, 0.50 g, 0.0047 kg, 450 mg, 3.8 cg
c.) 2.5L, 22cL, 13dL, 870mL, and 175cm3
13dL, 2.5L, 870 mL, 22cL, 0.175 L
Explanation:
The International System of Units is inherited from the old decimal metric system. One of the main characteristics is that the units are based on physical phenomena. The units of the S.I. they are the reference for the indications of the measuring instruments, and are found by means of calibrations. The International System of Units has seven basic units, called fundamental units. By combining the basic units the other units are obtained, called units derived from the International System.
1) The SI Units for Length are; The length of a new pencil: cm (centimeters), The width of your classroom: dam (decameters), The length of your arm: m (meters), The diameter of pencil lead: μm (micrometers). 2) The SI Units for Mass: A person: kg (kilograms), A banana: g (grams), Your daily vitamin tablet: mg, A pencil: g . 3) SI Units for Volume: A glass of milk: L, The amount of water required to fill a glass of water: mL (milliliters), A dose of cough syrup: mL, A truckload of sand: m3 (cubic meters). 4) Measurements of Length:1.2 m 65 dm (decimeter) 750 cm (centimeter) 2000 mm (millimeter) 0.005 km, Measurements of Mass: 0.00047 kg 0.27 dg 0.50 g (gram) 3.8 cg 450 mg (milligram), Measurements of Volume: 2.5 L 13 dL , 22 cL (centiliter) 870 mL (milliliter) 175 cm³ (cubic centimeter).
1) The SI units for measuring each of the given quantities are;
The length of a new pencil: cm (centimeters)
Centimeters are a suitable SI unit for measuring the length of a new pencil. Centimeters are a commonly used unit for relatively small measurements, and they are well-suited for measuring objects like pencils, which are typically a few tens of centimeters in length.
The width of your classroom: dam (decameters)
Decameters (dam) are not commonly used for measurements like the width of a classroom.
The length of your arm: m (meters)
Meters are a suitable unit for measuring the length of larger objects like body parts. The length of an arm is typically measured in meters because it is a relatively substantial length compared to centimeters or millimeters.
The diameter of pencil lead: μm (micrometers)
Micrometers (μm) are the most appropriate unit for measuring the diameter of pencil lead.
2) Identify the appropriate SI unit for measuring mass:
Mass of a person: kg (kilograms)
Kilograms are the most appropriate SI unit for measuring the mass of a person. Kilograms are a standard unit of mass and are used for measuring larger objects, including humans.
Mass of a banana: g (grams)
Grams are a suitable SI unit for measuring the mass of smaller objects like a banana. Bananas typically have masses that fall within the gram range.
Mass of your daily vitamin tablet: mg (milligrams)
Milligrams are the most appropriate SI unit for measuring the mass of a small object like a daily vitamin tablet.
Mass of a pencil: g (grams)
Grams are suitable for measuring the mass of objects like pencils. Pencils are relatively light and fall within the range of grams.
3) SI unit for measuring each of the given quantities;
A glass of milk: L (liters); Liters are a suitable SI unit for measuring the volume of liquids like a glass of milk.
The amount of water required to fill a glass of water: mL (milliliters); Milliliters are the most appropriate SI unit for measuring smaller quantities of liquids like the amount of water needed to fill a glass.
A dose of cough syrup: mL (milliliters); Similar to the previous case, milliliters are the most suitable SI unit for measuring the volume of a dose of cough syrup.
A truckload of sand: m³ (cubic meters); Cubic meters are the most appropriate SI unit for measuring large volumes, such as a truckload of sand.
4) The measurements in each set from largest to smallest:
In set A, the measurements are given in various units of length. To rank them from largest to smallest, we simply convert all measurements to the same unit (for example, millimeters) and then compare their numerical values. Larger numerical values represent larger measurements.
In set B, the measurements are given in various units of mass. Similar to set A, we can convert all measurements to the same unit (for example, milligrams) and then rank them based on their numerical values. Larger numerical values represent larger masses.
In set C, the measurements are given in various units of volume. Liters and milliliters are common units for volume, and cubic centimeters (cm³) are also used for measuring volume. In this case, we can directly compare the values since they are all volume measurements.
To know more about SI Units here
https://brainly.com/question/24688141
#SPJ3
In two or more complete sentences explain how to balance the chemical equation and classify its reaction type
Answer:
Hello My friend! The balanced reaction its: 2Al(s) + 3CuSO4(aq) –> Al2(SO4)3(aq) + 3Cu(s)
Explanation:
In this case an oxidation reaction involving the metallic aluminum occurred;
Al (s) -> Al3 + (aq) + 3e–
and reduction reaction involving copper;
2e– + Cu2 + (aq) -> Cu (s)
Answer:
2Al(s) + 3CuSO4(aq) → Al2(SO4)3(aq) + 3Cu(s)
Single replacement reaction
Explanation:
From the picture above the reaction is between aluminium and copper(ii) tetraoxosulphate .
The chemical reaction can be represented with a chemical equation as follows:
Al(s) + CuSO4(aq) → Al2(SO4)3(aq) + Cu(s).
In a chemical reaction we have the reactant side and the product side. The reactant side is at the left hand side while the product is at the right hand side.
The number of atom of element should be equal in number on both sides for the chemical equation to be balanced .
2Al(s) + 3CuSO4(aq) → Al2(SO4)3(aq) + 3Cu(s)
The equation is balanced now as we have 2 atoms of aluminium on the reactant and product sides., 3 atoms of copper on both sides, 3 atoms of S and 12 atoms of O on both sides.
The reaction type is a single replacement reaction. The more reactive aluminium displaced copper from it compound.
Assume that it takes 64.25 mL of a 0.1555 M HCl solution to fully neutralize the calcium carbonate from one Tums tablet. How many milligrams of calcium carbonate are in the Tums tablet? Assume that there are no other ingredients that will react with the acid.
364667 milligrams of calcium carbonate will be in the Tums tablets that contains 64.25 mL of a 0.1555 M HCl solution.
How to calculate mass?The mass of a substance can be calculated using the following formula:
molarity = no of moles ÷ volume
no of moles = 64.25 × 0.1555 = 9.99moles
no of moles = mass/molar mass
Molar mass of HCl = 36.5g/mol
mass = 36.5 × 9.99 = 364.7g
Therefore, 364667 milligrams of calcium carbonate will be in the Tums tablets that contains 64.25 mL of a 0.1555 M HCl solution.
Learn more about mass at: https://brainly.com/question/19694949
#SPJ1
The Tums tablet contains 500 milligrams of calcium carbonate, calculated by using stoichiometry based on the volume and molarity of HCl solution needed to neutralize it.
Explanation:The question involves calculating the mass of calcium carbonate in a Tums tablet based on the volume and molarity of HCl used to neutralize it. We know that it takes 64.25 mL of a 0.1555 M HCl solution to fully neutralize the tablet. Using the stoichiometry of the reaction between calcium carbonate and hydrochloric acid:
CaCO3(s) + 2HCl(aq) → CaCl2(s) + CO2(g) + H2O(l)
We can determine the number of moles of HCl reacted:
mole HCl = (0.06425 L) * (0.1555 M) = 0.009993 mol HCl
Since it takes 2 moles of HCl to react with 1 mole of CaCO3, we can find the moles of CaCO3:
mole CaCO3 = 0.009993 mol HCl / 2 = 0.0049965 mol
The molar mass of calcium carbonate (CaCO3) is approximately 100.09 g/mol. We can now find the mass:
mass CaCO3 = 0.0049965 mol * 100.09 g/mol = 0.500 g or 500 mg
The Tums tablet contains 500 milligrams of calcium carbonate.
Need help please omg Perform each of the following conversions being sure to set up the appropriate conversion factor in each case 59. a. 12.5 in to centimeters c. 2513ft to miles 60. a. 2.23m to yards. c. 292cm to inches Please show work
Answer:
The answer to your question is:
a) 31.75 cm
b) 0.475 miles
c) 2.44 yards
d) 11496.04 inches
Explanation:
Convert
a) 12.5 in to cm
1 in ------------------- 2.54 cm
12.5 in ---------------- x
x = 12.5(2.54)/1 = 31.75/ = 31.75 cm
b) 2513 ft to miles
1 mile -------------- 5280 ft
x miles ------------ 2513 ft
x = 2513(1)/5280 = 0.475 miles
c) 2.23 m to yards
1 m ------------- 1,094 yards
2.23 m ---------- x
x= 2.23x1.094/1 = 2.44 yards
d) 292 m to inches
1 m ---------------- 39.37 inches
292 m ------------- x
x = 292 x 39.37/1 = 11496.04 inches
Water molecules are ____________ because the hydrogen atoms are positively charged on one end and the oxygen atoms are negatively charged on one end. Molecules that are ____________ share electrons equally. Sodium chloride (NaCl) is an example of a ____________ molecule because it is soluble in water. Molecules that are ____________ are insoluble in water. It is ____________ that most molecules formed with nonpolar bonds dissolve easily in water.
Answer:
What is your question?
High School Chemistry 10+5 pts
Water molecules are _____polar_______ because the hydrogen atoms are positively charged on one end and the oxygen atoms are negatively charged on one end. Molecules that are _____nonpolar_______ share electrons equally. Sodium chloride (NaCl) is an example of a ______polar______ molecule because it is soluble in water. Molecules that are _____nonpolar_______ are insoluble in water. It is ______false______ that most molecules formed with nonpolar bonds dissolve easily in water.
1. Alginate is
a. Reversible Hydrocolloid impression material
b. Irreversible Hydrocolloid impression material
c. Polysulfideimpression material
d. Polyvinyl siloxane impression material
Answer:
Option b, Irreversible hydrocolloid impression material
Explanation:
Irreversible is used as an impression material to take impression from edentulous jaws. It is also used in wound healing and drug delivery.
Alginate is a natural polymer found in cell wall of brown seaweed.
Its monomers are β-D-mannuronate and α-L-guluronate.
In association with Ca2+, it forms gel. It is hydrophilic in nature.
The concentration of a NaOH solution was experimentally determined by dissolving 0.7816 grams KHP (204.2212 grams/mol) in 50.0 mL of water and titrating the sample with 40.82 mL of the NaOH (40.000 grams/mol) solution. The concentration of the standard NaOH solution is _________.
Answer:
The concentration of the standard NaOH solution is 0.094 moles/L.
Explanation:
In the titration, the equivalence point is defined as the point where the moles of NaOH (the titrant) and KHP (the analyte) are equal:
moles of NaOH = moles of KHP
[tex][NaOH]xV_{NaOH} = moles of KHP[/tex]
[tex][NaOH] = \frac{moles of KHP}{V_{NaOH}}[/tex]
The [tex]V_{NaOH}[/tex] is 40.82mL = 0.04082L and the moles of KHP are
[tex]0.7816g / 204.2212\frac{g}{mol} = 3.827x10^{-3} moles[/tex]
Replacing at the first equation:
[tex][NaOH] = \frac{3.827x10^{-3}moles}{0.04082L} = 0.094 moles/L[/tex]
Which of the statements describes a chemical property?
a) Iodine (a purple solid) becomes a purple gas.
b) Titanium is less dense than iron.
c) Sugar burns in air to form water and carbon dioxide.
d) Water boils at 100 ∘C.
Answer:
The answer to your question is letter c) Sugar burns in air to form water and carbon dioxide.
Explanation:
Exist two kinds of phenomena: physical and chemical
physical phenomena are when matter only changes its physical state, like evaporation, condensation, sublimation, etc.
chemical phenomena are when matter changes, react and form a new compound.
a) Iodine (a purple solid) becomes a purple gas. This is a physical change, sublimation, this answer is wrong.
b) Titanium is less dense than iron. Density is a physical property of matter, this answer is incorrect.
c) Sugar burns in air to form water and carbon dioxide. Sugar in transform into water and carbon dioxide, this is the right answer.
d) Water boils at 100 ∘C. Evaporation is a physical change, the answer is wrong.
The statement describing the chemical property has been the burning of sugar in air to form carbon dioxide and water. Thus, option C is correct.
The property of the element has been given as the physical and chemical property.
The physical property has been defined as the one in which the chemical composition has not been changed. It has been based on the appearance of the compound.
The chemical property has been the reactivity of the compound that results in the change in the chemical composition with the formation of new products.
Chemical propertyThe following changes have been classified as:
Iodine becomes purple:It has been the appearance and no change in the chemical composition. Thus, it is a physical property.
Titanium, less dense than iron:It has been based on the comparative density. There has been no reaction and change in chemical composition. Thus, it is a physical property.
Sugar burns in airThe burning of sugar results in the change in the chemical composition with the formation of new product. Thus, it has been a chemical property.
Boiling of waterThe boiling and freezing results in the change in state of matter. There has been no change in the chemical composition, Thus, it has been a physical change.
Hence, the statement describing the chemical property has been the burning of sugar in air to form carbon dioxide and water. Thus, option C is correct.
Learn more about chemical property, here:
https://brainly.com/question/1728902
When the compound, Ca(NO3)2, is mixed with water, the Ca(NO3)2 is:
soluble because all Ca+2 compounds are soluble in water
insoluble because most Ca+2 compounds are insoluble in water
soluble because all NO3−1 compounds are soluble in water
insoluble because NO3−1 compounds are usually insoluble in water
Answer:
The answer t your question is below:
Explanation:
When a salt is mixed with water, it will form ions, these ions are soluble in water.
Example: Ca(NO3)2 ⇒ Ca⁺² + 2 NO₃⁻¹
Both Ca⁺² and NO₃⁻¹ are soluble in water.
Then the answer to your question is:
Soluble because all Ca+2 compounds are soluble in water
Soluble because all NO3−1 compounds are soluble in water
Ca(NO3)2 is soluble in water because all nitrate compounds are soluble in water regardless of the cation they are paired with.
Explanation:When the compound Ca(NO3)2 is mixed with water, the Ca(NO3)2 is soluble because all NO3−1 compounds are soluble in water. This is generally based on the solubility rules of ionic compounds in water where all nitrates (NO3-) are soluble, regardless of the cation they are paired with. Thus, in spite of the solubility trends of calcium (Ca+2), the nitrate (NO3-) ion dictates the solubility of this compound in water, making it soluble.
Learn more about Solubility here:https://brainly.com/question/28170449
#SPJ6
can someone please help me with these questions. image attached
If 1.00L of muriatic acid w/ a pH of 2.5 is poured to 8.00L water, what is the new molar concentration of the muriatic solution? Hint: use C1•V1 = C2•V2
Answer:
The answer to your question is: C2 = 0.0004 M
Explanation:
Data
pH = 2.5; V = 1.0 L
V2 = 8.0 L C2 = ?
Formula
C1V1 = C2V2
C2 = C1V1 / V2
pH = -log[H⁺]
Process
[H⁺] = antilog -pH
[H⁺] = antilog (-2.5)
[H⁺] = 0.003 M = C1
Finally
(0.003)(1 l) = C2(8)
C2 = 0.003 / 8
C2 = 0.0004 M
Common brass is a copper and zinc alloy containing 37.0% zinc by mass and having a density of 8.48 g/cm3. A fitting composed of common brass has a total volume of 125.5 cm3
Hey!
---------------------------------------------------------------
Mass of the alloy:
m = 8.48 g/cm^3 * 125.5 cm^3 = 954 grams
954 * 0.37 = 352.98 grams
---------------------------------------------------------------
Mass of the copper:
954 - 352.98 = 601.02 grams
---------------------------------------------------------------
Copper Molar Mass: 63.55 g/mol
Zinc Molar Mass: 65.38 g/mol
---------------------------------------------------------------
Moles in copper: 352.98 / 65.38 = 5.40 moles!
Moles in zinc: 601.02 / 63.55 = 9.46 moles!
---------------------------------------------------------------
Atoms in copper = 10^24 * 3.25 atoms
Atoms in zinc = 10^24 * 5.70
I used the Avogadro's Number.
---------------------------------------------------------------
Hope This Helped! Good Luck!
PLEASE ANSWER!!! Sulfuric acid (a component of acid rain) reacts with limestone (calcium carbonate) to produce calcium sulfate and carbon dioxide. This damages buildings and statues made of limestone. Which solution of sulfuric acid will damage these structures more quickly? A. 0.001% B. 0.005% C. 0.010% D. 0.015%
Answer:
D is the best choice. Those percentages, are giving you the information about how concentrated are the solutions. As 0.015 is so concentrated, this solution will damage the structures more quickly
Explanation:
Answer:
The answer is D. 0.015%
Explanation:
That is the concentration of the Sulfuric Acid solution given in mass per mass percentage (w/w%), it means that the solution has 0.015 grams of Sulfuric Acid per 100 grams of solution. If it is compared with C answer, it has 0.005 grams more. Considering the reaction:
[tex]H_{2} SO_{4} + CaCO_{3}[/tex] ⇒ [tex]CaSO_{4} + CO_{2} + H_{2}O[/tex]
The more [tex]H_{2} SO_{4}[/tex] (Sulfuric Acid) is present, the more [tex]CaCO_{3}[/tex] (Limestone) is consumed.