Answer:
Once you reach adulthood, you will not experience peer pressure.
Explanation:
We tend to believe that self-control comes from within, but many of our attitudes depend as much on friends and family as on ourselves. That's because at any stage of our life (even the adult stage) our friends and our family have the power to influence us, sometimes that influence is good and sometimes bad, it's up to us to reason about them.
The people around us have the power to make us fat, consume more alcohol, worry less about the environment and expose ourselves to the sun without proper protection, among many other things.
It is not simply about peer pressure, where you deliberately act in a certain way to suit the group. It is, in fact, largely an unconscious attitude. Without your awareness, your brain is constantly picking up cues from people around you to dictate your behavior. And the consequences can be serious.
Answer:
its B :)
Explanation:
Two vectors, X and Y, form a right angle. Vector X is 48 inches long and vector Y is 14 inches long. The length of the
resultant vector is
inches.
Mark this and retum
Save and Exit
Submit
Answer:
The length of the resultant vector is 50 inches
Explanation:
Use the Pythagorean theorem to find the answer, since the addition of these two perpendicular vectors will have a magnitude (length) equal to the hypotenuse of the right angle triangle formed by the two:
[tex]|Resultant|\,=\,\sqrt{x^2+y^2} \\|Resultant|\,=\,\sqrt{48^2+14^2}\\|Resultant|\,=\,\sqrt{2304+196}\\|Resultant|\,=\,\sqrt{2500}\\|Resultant|\,=\,50\,in[/tex]
The length of the resultant vector is 50 inches
Answer:
50 inches Edge 2021
Explanation:
the sun and stars appear to move due to the earths rotation true or false
Answer:
True. The sun and stars look like they are moving because the earth rotates.
How far does a ca4 go
Answer:
as far as the car can withstand
Explanation:
How does universal gravitation affect you and objects around you?
Answer:
Newton proposed the "law of Universal Gravitation". He said that gravity is universal in nature and it affects all the objects. Gravity is present between you and every object having mass around you. The "Strength of the gravity" between two objects with mass is depends on the product of masses and distance between the objects.
The "Gravitational force" increases with the increase in mass of the objects and decreases with the increase in distance between the objects. The gravity exerts a force on every object. The direction of force of gravity is towards the centre of the Earth.
Supposing you were in space..in a weightless environment, would it require a force to set an object in motion? Explain..
it wouldn't, right? because it's in space, no gravity to pull it, or act upon it..so it would just float?
Answer:
Yes, a force is require to set an object in motion.
Explanation:
In space, even if you feel weightless, you are subject to motion. If you are orbiting the Earth, you are under the constant influence of Earth having a free-fall acceleration equal to the centripetal acceleration. To disturb this orbital motion, an external force is required. According to Newton's laws of motion, a force is required to change the state of the rest of a body or to change the velocity or direction if it is moving with uniform velocity along a straight line. Whenever there is a change in velocity or direction of a body there is a force acting on it.Adding a ___ to an electric circuit would increase the magnetic field around a wire
Answer: solenoid
Explanation: solenoid: increase strength around electromagnetic fields
solve this for 100 points work must be shown and must be all the problems PLZ I NEED IT ASAP
1) Angular velocity: D) 73.3 rev/s
2) Centripetal acceleration: D) [tex]5053 m/s^2[/tex]
3) Net force on the car: E) [tex]2.19\cdot 10^4 N[/tex]
4) Orbital speed: D) [tex](\frac{GM}{r})^{\frac{1}{2}}[/tex]
5) Total mechanical energy: E) [tex]-\frac{GMm}{2r}[/tex]
6) Gravitational force: C) [tex]1.32\cdot 10^{-10}N[/tex]
7) Upward force: C) 188 N
8) Total upward force at B: C) 122 N
Explanation:
1)
The relationship between centripetal acceleration and angular velocity is given by
[tex]a_c = \omega^2 r[/tex]
where:
[tex]a_c[/tex] is the centripetal acceleration
[tex]\omega[/tex] is the angular velocity
r is the radius of the circular path
In this problem,
[tex]a_c = 1950 g = 1950(9.8)=19,110 m/s^2[/tex]
r = 9 cm = 0.09 m
Solving for [tex]\omega[/tex],
[tex]\omega=\sqrt{\frac{a_c}{r}}=\sqrt{\frac{19,110}{0.09}}=460.8 rad/s[/tex]
And keeping in mind that [tex]1 rev = 2 \pi rad[/tex], we can convert into rev/s:
[tex]\omega=460.8 rad/s \cdot \frac{1}{2\pi rad/rev}=73.3 rev/s[/tex]
2)
Again, the centripetal acceleration is given by
[tex]a_c = \omega^2 r[/tex]
where in this problem we have:
[tex]\omega=16 rev/s \cdot 2\pi (rad/rev) = 100.5 rad/s[/tex] is the angular velocity of the piece of dust
r = 0.50 m is the distance of the piece of dust from the axis of rotation
And substituting into the equation, we find the centripetal acceleration of the piece of dust:
[tex]a_c = (100.53)^2(0.5)=5053 m/s^2[/tex]
3)
Since the car is moving in circular motion, the net force is equal to the centripetal force, so it is given by:
[tex]F=m\frac{v^2}{r}[/tex]
where
m = 732 kg is the mass of the car
v = 20.0 m/s is the linear speed of the car
r = 13.0 m is the radius of curvature of the loop-the-loop
Here we have
m = 732 kg
v = 20.0 m/s
r = 13.0 m
Substituting into the equation, we find:
[tex]F=(732)\frac{20.0^2}{13.0}=2.25\cdot 10^4 N[/tex]
The closest option is E) [tex]2.19\cdot 10^4 N[/tex]
4)
The gravitational force between the satellite and the Earth provides the centripetal force that keeps the satellite in circular motion, therefore we can write:
[tex]m\frac{v^2}{r}=G\frac{Mm}{r^2}[/tex]
where the term on the left is the centripetal force while the term on the right is the gravitational force, and where
m is the mass of the satellite
v is its speed
r is the orbital radius
G is the gravitational constant
M is the Earth's mass
Solving for v,
[tex]v=\sqrt{\frac{GM}{r}} = (\frac{GM}{r})^{\frac{1}{2}}[/tex]
5)
The kinetic energy of the satellite is given by
[tex]K=\frac{1}{2}mv^2[/tex]
And substituting its speed, [tex]v=\sqrt{\frac{GM}{r}}[/tex], we get
[tex]K=\frac{GMm}{2r}[/tex]
The potential energy of the satellite is equal to the work that must be done against gravity to bring the satellite from r to infinite, and it is
[tex]U=-\frac{GMm}{r}[/tex]
The total mechanical energy is equal to the sum of kinetic and potential energy:
[tex]E=K+U=\frac{GMm}{2r}+(-\frac{GMm}{r})=-\frac{GMm}{2r}[/tex]
6)
The gravitational force between two objects is given by
[tex]F=G\frac{m_1 m_2}{r^2}[/tex]
where
[tex]G=6.67\cdot 10^{-11} m^3 kg^{-1}s^{-2}[/tex] is the gravitational constant
m1, m2 are the masses of the two objects
r is the separation between them
Here we have:
[tex]m_1 = 12 kg\\m_2 = 14 kg[/tex]
and
r = 9.22 m
Substituting,
[tex]F=(6.67\cdot 10^{-11})\frac{(12)(14)}{(9.22)^2}=1.32\cdot 10^{-10}N[/tex]
7)
To solve the problem, we can apply the equation of the equilibrium of momenta about point B:
[tex]Wx_W - F_A x_A=0[/tex]
where:
W = 300 N is the weight of the plank
[tex]x_W = 5 m[/tex] is the distance of the point of application of the weight from B (half the length of the plank)
[tex]F_A[/tex] is the upward force applied at A
[tex]x_A = 10 - 2 = 8 m[/tex] is the distance of the point of application of [tex]F_A[/tex] from B
Solving for [tex]F_A[/tex],
[tex]F_A = \frac{W x_W}{x_A}=\frac{(300)(5)}{8}=188 N[/tex]
8)
We can solve this part instead by applying the equation of equilibrium of moments around point A:
[tex]-Wx_W - W_B x_B + F_B x_{F_B} = 0[/tex]
where
W = 300 N is the weight of the plank
[tex]x_W = 5 - 2 = 3 m[/tex] is the distance of the point of application of the weight from A
[tex]W_B = 9.0 N[/tex] is the weight of the can of paint at B
[tex]x_B = 10 - 2 = 8 m[/tex] is the distance of the can of paint from A
[tex]F_B[/tex] is the upward force exerted by block B
[tex]x_{F_B}= 10 -2 = 8 m[/tex] is the distance of the point of application of [tex]F_B[/tex] from A
Solving for [tex]F_B[/tex],
[tex]F_B = \frac{W_B x_B + W x_A}{x_{F_B}}=\frac{(9)(8)+(300)(3)}{8}=122 N[/tex]
Learn more about circular motion:
brainly.com/question/2562955
brainly.com/question/6372960
About gravitation:
brainly.com/question/1724648
brainly.com/question/12785992
About moments:
brainly.com/question/5352966
#LearnwithBrainly
A 42 kg object is 2.5 m from a 55kg object. How much is the force of attraction between them?
Answer:
Force of attraction is 2,46*10^-8N[tex]F= G*(m1*m2/r^2)\\where \\\\G=6,67*10^-11 (N*m^2/kg^2)\\m1=42kg\\m2=55kg\\r=2,5m\\therefore\\F=6,67*10^-11*(42*55/2.5^2)\\
F=2,46*10^-8 N[/tex]
Explanation:
Using the Law of Universal Gravitation, proposed by Newton.
If only 10 pounds is required to lift a 500-lb block, how much chain must be played out to lift the engine 3.0 inches?
0.060 in
150 in
290 in
6.0 in
need help on more asap
Answer:
150 inches (12.5 ft)
Explanation:
The work done to lift the 500 pound block 3 inches should be the same as that to lift the 10 pond object a given distance.
The following is the equation one needs to solve:
[tex]10 \,lb\,* \,x\,=\,500\,lb\,*\,3\,in\\10 \,lb\,* \,x\,=\,1500\,lb\,in\\[/tex]
therefore solving for the distance "x" gives as the answer (in inches):
[tex]10 \,lb\,* \,x\,=\,1500\,lb\,in\\x\,=\,\frac{1500\,lb\,in}{10\,lb} \\\\x\,=150\,in[/tex]
which can also be given in feet as: 12.5 ft
Answer:
150 in"
Explanation:
Two mechanical waves that have positive displacements from the equilibrium position meet and coincide. What kind of
interference occurs?
a constructive
C. complete destructiv
b. destructive
none
When two mechanical waves that have positive displacements from the equilibrium position meet and coincide, a constructive interference occurs.
Option A
Explanation:Considering the principle of superposition of waves; the resultant amplitude of an output wave due to interference of two or more waves at any point is given by individual addition of their amplitudes at that point. Two waves with positive displacements refer to the fact that crest of the both the waves are on the same side of displacement axis, either both are positive or both are negative, similarly with their troughs.
If such two waves with their crest on crest meet at any point, by superposition principle. their individual amplitude gets added up and hence the resultant wave after interference is greater in amplitude that both the individual waves. This is termed as a constructive interference. Destructive interference on the other hand is a condition when one of the two waves has a positive displacement and other has a negative displacement (a condition of one’s crest on other’s trough); resulting in amplitude subtraction.
which of the following materials has the lowest resistance copper wood plastic
Final answer:
Copper has the lowest resistance among the given materials.
Explanation:
Copper has the lowest resistance among the given materials: copper, wood, and plastic.
In a series circuit, the total resistance is the sum of individual resistances. The circuit element with the lowest resistance would contribute the least to the overall resistance.
In a parallel circuit, the total resistance is less than the smallest individual resistance due to the combined effect of multiple paths for current flow.
It's important to note that resistance in most materials increases with temperature. So, achieving the lowest possible resistance often involves using superconducting materials at extremely low temperatures or selecting materials with inherently low resistance characteristics for specific applications.
What does sodium form an ion a+1 charge
Answer:
It has only 1 electron in its valence shell and if that electron is removed it will acquire noble gas configuration
Explanation:
Sodium forms an ion of charge +1 as in its ionic state it has inert gas configuration
It forms an ion of charge +1 when the valence shell electron is removed to gain the noble gas configuration and the electrons can be removed mostly from its valence shell because inner shell electrons will be tightly bounded to the nucleus of the atom and it requires high energy to remove the electron present in the inner shell when compared to the valence shell (outermost shell)
A race car accelerates from 0 m/s to 30.0 m/s with a displacement of .25 km. what is the vehicle's acceleration?
Answer:
The acceleration of the car, a = 60 m/s²
Explanation:
Given data,
The initial velocity of the car, u = 0 m/s
The final velocity of the car, v = 30 m/s
The displacement of the car, s = 0.25 km
Using the III equations of motion
v² = u² + 2as
a = (v² - u²) / 2s
= 30 / 2 x 0.25
= 60 m/s²
Hence, the acceleration of the car, a = 60 m/s²
A skidder dragging of 520 kg walk-through forest at a constant speed of 3.5 m/s. If the skidder is applying a force of 1850 N what is the coefficient of friction between the log and the ground
Answer:
The coefficient of friction between the log and the ground is, μₓ = 0.3630
Explanation:
Given data,
The skidder dragging the mass, m = 520 kg
The acceleration of the mass, a = 3.5 m/s
The force applied by the skidder, Fₓ = 1850 N
The kinetic frictional force is given by,
Fₓ = μₓ η
μₓ = Fₓ / η
Where μₓ - the coefficient of the kinetic friction
η is the normal force acting on the mass due to gravitational force.
η = mg
= 520 x 9.8
= 5096 N
Substituting the values in the above equation,
μₓ = 1850 N / 5096 N
= 0.3630
Hence, the coefficient of friction between the log and the ground is, μₓ = 0.3630
The autumnal _______ occurs in September when the days start getting shorter and the nights are longer in the Northern Hemisphere. During a new moon phase, spring tides produce the _______ difference between high and low tides. Tides are caused by _______ pulling the water of the oceans and causing it to bulge toward the large masses of the moon and sun. During a lunar eclipse, the moon briefly passes through the _______, where it receives much less sunlight causing the moon to appear dim. When the moon passes between the sun and the earth a/an _______ eclipse occurs which momentarily blocks the sun's rays from reaching certain areas of the earth.
1. Equinox
2. Greatest
3. Gravity
4. Penumbra
5. Solar
6. Earth's atmosphere refracts sunlight toward the moon when the moon passes through the umbria. The atmosphere scatters blue light from the sun, but red light is refracted and bent toward the moon.
Answer:
1. Equinox
2. Greatest
3. Gravity
4. Penumbra
5. Solar
6. Earth's atmosphere refracts sunlight toward the moon when the moon passes through the umbria. The atmosphere scatters blue light from the sun, but red light is refracted and bent toward the moon.
3. A -4.00-uC charge lies 20.0cm to the right of a 2.00-uC charge on the x axis. What is the force on the 2.00-uC charge?
Answer:
The force on the 2.00-uC charge is [tex]36 \times 10^{10} \mathrm{N}[/tex]
Explanation:
We know that force between two charges is given by Coulomb’s law,
[tex]\mathrm{F}=\mathrm{k} \frac{q 1 q 2}{r * r}[/tex]
Where k = Coulomb’s constant =
[tex]9.0 \times 10^{9} \mathrm{Nm}^{2} \mathrm{C}^{-2}[/tex]
And q1 and q2 are the charges given to be = -4.00-uC and 2.00-uC charges
And r = distance between the charges = 20 cm = 0.2 m
Substituting the given values in the formula we get force applied on [tex]2.00\ \mu C[/tex] charge,
F = [tex]36 \times 10^{10} \mathrm{N}[/tex] attractive force which is the required answer.
The force on the 2.00-uC charge is 1.8N towards the right.
Let us assume Q = -4.00μC and charge q = 2.00μC. Distance between them is r = 0cm = 0.2m
Coulomb's Law:According to Coulomb's law, the electrostatic force between two charges Q and q separated by a distance r is given by:
[tex]F=k\frac{Qq}{r^2}[/tex]
where k is Coulomb's constant
[tex]F=\frac{9\times10^9\times4\times10^{-6}\times2\times10^{-6}}{0.20\times0.20} N\\\\F=1.8N[/tex]
Since we are calculating the force on the q which is positive, due to Q which is negative. The direction of the force will be towards the right since the electric field for the negative charge will be directed towards the charge, which is towards the right.
So the net force is 1.8N towards right.
Learn more about Coulomb's Law;
https://brainly.com/question/506926?referrer=searchResults
Which are examples of convection currents ? Select three options.
marshmallows toasting over a campfire
a pot being heated by an electric burner
rice moving in a pot of water that is being heated
a radiator that emits warm air and draws in cool air
a hot air balloon rising and falling in the atmosphere
Answer:
(B) A pot being heated by an electric burner
(D) A radiator that emits warm air and draws in cool air
(E) A hot air balloon rising and falling in the atmosphere
These are some of the examples of the convection currents.
Explanation:
Earlier, electrons were believed to have positive charges and then electric current were discovered. But later after the invention of electric current and current which is termed to be the flow of electrons and is usually flows from negative to positive terminal. But its convention is not discarded in which current moves from positive terminal to negative and it is called convention current. The direction of current shown in the circuit is said to be the convention current.
Hence, the following are the examples of convention current.
1. Boiling water - The energy travels into the pot from the burner, boiling down the water. Then this warm water is accumulating on the top and colder one is heading down to absorb it, triggering a circular motion.
2. Radiator - Place hot air at the peak and pull cool air at the bottom.
3. Hot air balloon - The air is warmed up by a heating element within the balloon, so the air jumps upwards. This induces the balloon to increase in size due to the inside trapping of the warm air. He removes a few of the warm air when the pilot commences to dive, and cold air takes place, enabling the parachute to drop.
Your answer is.
(B) a pot being heated by an electric burner
(D) a radiator that emits warm air and draws in cool air
(E) a hot air balloon rising and falling in the atmosphere
Hope this helps you and you pass your test good luck my friend!
A force of 6.0 N acts on a 3.0 kg object at rest for 10 seconds.
c) What was the beginning momentum of the object?
The beginning momentum of the object is zero
Explanation:
The momentum of an object is given by:
[tex]p=mv[/tex]
where
m is the mass of the object
v is its velocity
For the object in this problem, we have:
m = 3.0 kg is its mass
v = 0, because it is initially at rest, so its initial velocity is zero
Therefore, the initial momentum of the object is
[tex]p=(3.0)(0)=0[/tex]
Learn more about momentum:
brainly.com/question/7973509
brainly.com/question/6573742
brainly.com/question/2370982
brainly.com/question/9484203
#LearnwithBrainly
A speed boat travels with a speed of 6 m/s travels directly north to cross a river flowing west with a current traveling at a speed of 3 m/s. What is the resultant velocity of the boat?
Answer:
6.7 m/s @ 116.6°
Explanation:
Use Pythagorean theorem to find the magnitude:
v² = vx² + vy²
v² = (-3 m/s)² + (6 m/s)²
v = √45 m/s
v ≈ 6.7 m/s
Use trigonometry to find the direction:
θ = atan(vy / vx)
θ = atan(6 m/s / -3 m/s)
θ = atan(-2)
θ ≈ 116.6° from the +x axis, or 63.4° north of west.
You want to make a ride so you do not want to exceed 1.1g’s, if the radius of the turns are 10m, then what is the maximum speed the ride can go at?
The maximum speed is 10.4 m/s
Explanation:
For a body in uniform circular motion, the centripetal acceleration is given by:
[tex]a=\frac{v^2}{r}[/tex]
where
v is the linear speed
r is the radius of the circular path
In this problem, we have the following data:
- The maximum centripetal acceleration must be
[tex]a=1.1 g[/tex]
where [tex]g=9.8 m/s^2[/tex] is the acceleration of gravity. Substituting,
[tex]a=(1.1)(9.8)=10.8 m/s^2[/tex]
- The radius of the turn is
r = 10 m
Therefore, we can re-arrange the equation to solve for v, to find the maximum speed the ride can go at:
[tex]v=\sqrt{ar}=\sqrt{(10.8)(10)}=10.4 m/s[/tex]
Learn more about centripetal acceleration:
brainly.com/question/2562955
#LearnwithBrainly
Final answer:
To find the maximum speed that a ride can go without exceeding 1.1g's with a turn radius of 10m, the centripetal acceleration formula is used, and the calculation results in a maximum speed of approximately 10.44 m/s.
Explanation:
To calculate the maximum speed at which a ride can go without exceeding 1.1g's of acceleration, we use the formula for centripetal acceleration a = v^2 / r, where a is the centripetal acceleration, v is the speed, and r is the radius of the turn, which is given as 10m.
We want to keep the acceleration a at no more than 1.1 times the gravitational acceleration g (9.8 m/s^2). Thus, we have: 1.1g = v^2 / r. Plugging in the numbers, we get 1.1 × 9.8 m/s^2 = v^2 / 10 m. To find the maximum speed v, we solve for v, which gives us v = √(1.1 × 9.8 m/s^2 × 10 m). After calculating, we find the maximum speed to be approximately 10.44 m/s.
Which of the following is a scalar quantity?
a. 35m
b. 20 m to the right
c. 30 m to the North
d. All of the above
The only scalar quantity is a. 35 m
Explanation:
In physics, there are two types of quantities:
- Scalar: a scalar quantiy is a quantity having only a magnitude, so it is just a number followed by a unit. Examples of scalar quantities in physics are:
Speed
Energy
Distance
Time
- Vector: a vector quantity is quantity having both a magnitude and a direction. Examples of vector quantities in physics are:
Velocity
Force
Acceleration
Displacement
Let's now analyze each given option, to evaluate if it is a scalar or a vector:
a. 35m --> it is only a unit (no direction), so it is a scalar
b. 20 m to the right --> it has a direction, so it is a vector
c. 30 m to the North --> it has a direction, so it is a vector
So, the only correct option is a).
Learn more about scalars and vectors:
brainly.com/question/2678571
brainly.com/question/4945130
#LearnwithBrainly
A car goes 152 miles in 2 hours and 5 minutes. Calculate the car’s speed in units of m/s. 1 mi = 1600 m.
Answer:
The speed of the car is 32.4m/s
Explanation:
1mi = 1600m
152mi = 243 200m
2hr 5min = 7200s + 300s
= 7500s
speed = distance/time
= 243200/7500
= 32.4m/s (3s.f)
2. Does the amount of iron in the water affect plant growth?
Hypothesis:
use if and then
Answer:
Yes, the amount of Iron can affect the growth of plant.
Explanation:
Iron is essential micro-nutrient for the growth of plant but it is required only in small amount. Iron is required when plant produces chlorophyll and this gives plants oxygen and healthy green color but if a plant is suffering from iron deficiency then the plant's growth becomes stunted and leaves color changes to yellow. For plants requirement of iron is just 1 to 1.5 lb per acre whereas, requirement of nitrogen is 75 to 200 lb per acre.
The amount of iron in the water affects plant growth, with both deficiency and excess having potential negative impacts. A testable hypothesis using the 'if...then' structure could predict improved growth at optimal iron levels, or decreased health at excessive levels, with measurable outcomes such as plant height and foliage health.
Explanation:The amount of iron in the water does indeed affect plant growth. Iron is a crucial nutrient for plants, involved in the creation of chlorophyll and essential for some enzymes and cellular functions. However, iron levels must be balanced because both deficiency and excess can lead to plant health issues. Iron deficiency can cause chlorosis, a condition where leaves become pale or yellow because they don't have enough chlorophyll. On the other hand, excess iron, particularly in the ferrous state (Fe2+), can become toxic to plants, especially in waterlogged, anaerobic soil conditions.
To frame a hypothesis regarding the effect of iron on plant growth, using an 'if...then' format, one might say: "If the amount of iron in the water available to plants is increased to optimal levels, then the plants will show improved growth and healthier foliage compared to those receiving suboptimal levels." Conversely, if investigating the negative aspects: "If the amount of iron in the water exceeds optimal levels, then the plants may show signs of toxicity and decreased health."
It is important for the hypothesis to be testable and include measurable variables. For example, plant height, leaf color, and biomass could be measured to determine the impact of iron in water on plant growth.
23. Challenge: A gas is heated so that it expands from a volume of 1.0L to a volume of 1.5 l. If the
initial temperature of the gas was 5.0°C, then what is the final temperature of the gas?
417 K is the “final temperature” of the gas.
Explanation:
According to “Charles law” the change in “volume” of a given mass of gas expanded is “directly proportional” to the “temperature” of the given gas expanded. When we keep “pressure” of the gas as constant. Mathematically,
[tex]v \alpha T[/tex]
[tex]\frac{v}{T}=\text { constant }[/tex]
If gas is expanded from initial volume to final volume and initial temperature to final temperature then,
[tex]\frac{v_{1}}{T_{1}}=\frac{v_{2}}{T_{2}}[/tex]
[tex]\begin{array}{l}{\text { Where, } v_{1} \text { and } v_{2} \text { are the initial and final volumes of the gas expanded recpectively,}} \\ {T_{1} \text { and } T_{2} \text { are the initial and final temperatures of the gas expanded recpectively }}\end{array}[/tex]
Given that,
Initial volume is 1.0L
Final volume is 1.5L
[tex]\text { Initial temperatureis } 5.0^{\circ} \mathrm{C}=5+273=278 \mathrm{K}[/tex]
To find final temperature of the gas
Substitute the given values,
[tex]\frac{1}{278}=\frac{1.5}{T_{2}}[/tex]
[tex]T_{2}=1.5 \times 278[/tex]
[tex]T_{2}=417 K[/tex]
Therefore, final temperature of the gas after expanding is 417 K.
To calculate the final temperature of an expanding gas, you can use Charles's Law, which relates volume and temperature. By substituting the given values into the Charles's Law equation and solving for the final temperature in Kelvin, and then converting it to Celsius, you can find the final temperature of the gas.
Explanation:To find the final temperature of a gas that has expanded, we can use Charles's Law. This law states that at constant pressure, the volume of a given mass of an ideal gas increases or decreases by the same factor as its temperature (in Kelvin) increases or decreases. The formula is: V1/T1 = V2/T2, where V is volume and T is temperature (in Kelvin).
The initial volume (V1) is 1.0L, and the final volume (V2) is 1.5L. The initial temperature (T1) is 5.0°C, which is 278.15K. To find the final temperature in Kelvin (T2), rearrange the formula to get T2 = V2*T1/V1. Substituting in the values gives T2 = (1.5L * 278.15K) / 1.0L. Calculating this gives us a value for T2. To convert T2 back to Celsius, subtract 273.15 from the Kelvin temperature.
Which part provides the resistance force in the
photo?
A (spring scale)
-В
B (wooden cube and clay)
C (ruler)
OD (clay block)
Answer:
D- clay block
Explanation:
Answer:
The correct answer is D.
Explanation:
The clay block provides the force of resistance in the photo, since the weight it exerts on the right end of the ruler on which it is supported makes the system stay in balance. The weight of the spring balance (object A) is transferred to its point of support on the ruler, while the wood and clay cube only exerts one point of support, but does not exert any force on the ruler. The weight exerted by the clay block downward counteracts the weight of the spring balance.
Have a nice day!
When using the right-hand rule to determine the direction of the magnetic field around a current-carrying wire, which part of the
right hand points in the direction of the magnetic field?
-palm
-fingers
-back
-thumb
Answer:
Fingers
Explanation:
The index finger shows the moving charge, while your middle finger shows the magnetic field line.
Answer: Palm
Explanation: When you have a wire, you must point your thumb in the direction in which the electricity is going, and now you close your palm, in the direction in which you closed your hand is in the direction in which points the magnetic field.
Then the correct option is the first one, the palm points in the direction of the magnetic field.
A 5kg mass at rest on the ground is rised up to 15m. Find the work that was done on the object.
A. E before=___ Work=___ E after=___
B. Conservation of Energy equation:
C. Solve.
Answer:
E before = 0 J Work = 735.75 J E after= 735.75 J
Explanation:
The work that was done on the object is calculated as follows:
W = m*g*h
where m refers to the mass of the object, g to gravitational acceleration (9.81 m/(s^2)) and h to the hight that the object was raised up. Replacing with data into the equation (units are ommited):
W = 5*9.81*15
W = 735.75 J
Taking the ground as heigth = 0 m, then both potential and kinetic energy of the object before the lift was zero (notice that it was resting). Conservation energy equation states that the change of energy of an object is equal to the work applied on the object (like this case) or done by the object. That is:
ΔE = W
where ΔE = Energy after - Energy before
Therefore:
Energy after = W = 735.75 J
The potential energy after the lift is also calculated as m*g*h, so the energy after the lift is all potential energy gained by the object due to the work applied on it.
ANSWER FAST!! WILL GIVE CORRECT ANSWER BRAINLIEST! Which of the following could not be responsible for the acceleration of an object? wind friction gravity density
Answer:
The correct answer to this question is D) Density
EXPLANATION:
From Newton's second laws of motion, we know that the external force acting on a body is equal to the product of mass with the acceleration of the body.
Mathematically Force F = m × a
Here, m is the mass of the body.
a is the acceleration of the body.
Hence, it is the force which is responsible for creating acceleration in an object.
In the given question, we have four factors i.e wind, friction, gravity and density.
Out of the four options, wind, friction and gravity can exert force on an object and can create acceleration in it.
The density of a body is defined as the mass of that body per unit volume.
Mathematically it is written as -
Density d = \frac{m}{v} where v is the volume occupied by the body.
Hence, density will not be responsible for the acceleration of the body.
Answer: Your answer is option D: density
the wind can move objects depending on how strong it is and how small the object is.
Gravity pulls things towards the earth which will move it.
you needs movement to cause friction and friction causes heat which causes movement
but density has to do with the object itself not with movement.
Explanation:
Two carts, one of mass 2m and one of mass m, approach each other with the same speed, v. When the carts collide, they
hook together. Assume that positive momentum is to the right.
When two carts collide and hook together, their momenta combine according to the law of conservation of momentum.
Explanation:The subject of this question is Physics and the grade level is High School.
In this scenario, we have two carts of different masses approaching each other with the same speed. When the carts collide, they hook together and move as a single system. The total momentum before the collision is equal to the total momentum after the collision, according to the law of conservation of momentum.
The equation for conservation of momentum in this case would be: (2m * v) + (m * (-v)) = (3m * v'), where v' is the final velocity of the hooked carts.
Learn more about Conservation of momentum here:https://brainly.com/question/33316833
#SPJ12
v' = 0. The combined cart comes to a complete rest.
Let's analyze the scenario of two carts colliding and hooking together:
Initial Conditions:
Cart 1 (mass 2m) has velocity v to the right (positive momentum)
Cart 2 (mass m) has velocity v to the left (negative momentum)
Collision and Resulting Motion:
Upon collision, the carts hook together, forming a single system with a combined mass of 3m. The carts will then move together with a common velocity, v'.
Since the collision is inelastic, kinetic energy is not conserved. Some of the kinetic energy is converted into other forms, such as heat or sound.
Conservation of Momentum:
Despite the loss of kinetic energy, momentum is conserved in an isolated system. The total momentum before the collision must equal the total momentum after the collision.
Initial momentum = (2m * v) + (-m * v) = 0
Final momentum = (3m * v')
Therefore, v' = 0. The combined cart comes to a complete rest.
for such more question on velocity
https://brainly.com/question/80295
#SPJ3
The business practice of hiring workers in another country is known as globalization. insourcing. subcontracting. outsourcing.
The business practice of hiring workers in another country is known as outsourcing.
What is outsourcing?
Outsourcing is a business practice of hiring worker from outside country. This practice is done with the aim getting cheap labour force, or getting efficient labour force.
This business practice (outsourcing) can also be seen as transferring of employees and assets from one firm to another.
Thus, the business practice of hiring workers in another country is known as outsourcing.
Learn more about outsourcing here: https://brainly.com/question/4456416
The business practice of hiring workers in another country is known as outsourcing. Hence, option D is correct.
What is outsourcing?Outsourcing is the business practice of hiring a party to perform services and goods. It results in the globalization of markets and it drives maximum profits.
It is also defined as a company hiring a third party or a company to perform their task and to provide service for the company. Examples of outsourcing are advertising, website development, etc.
Outsourcing can help to reduce labor costs and enable them to work for less money. It helps the company to focus on the core aspects of the business. The outsourcing process leads to running a successful business model.
Outsourcing has the biggest advantage in time and money savings. Adapting outsourcing helps in gaining profit, increasing efficiency, and can control costs.
Hence, the business practice of hiring workers in another country is known as outsourcing. Thus, the correct option is D.
To know more about outsourcing:
https://brainly.com/question/28915776
#SPJ5