Screws have phenomenal tensile strength which is far greater than nails. Screws build a tight adhesion between two pieces of wood.
Nails are used for joints, because even after multiple twists the wood at the joints will remain together when nails are used. But a screw will come off after a single twist, if screws are used to hold wood at the joints.
For any static wood work screws are better than nails because of their tensile strength.
Molecules of hydrogen escape from earth, but molecules of oxygen and nitrogen are held to the surface and remain in the atmosphere. explain.
Answer:
Hydrogen is a light molecule
Explanation:
The molecular weight of a gas determines its molecular speed. Hydrogen is a very light gas, far lighter than oxygen or nitrogen. These heavier gases cannot escape the earth because of their molecular weight but hydrogen does escape the earth surface because it is very light molecule having very high molecular speed.
Imagine that you have isolated a mysterious liquid from a sample of food. you add the liquid to a beaker of water and shake vigorously. after a few minutes, the water and the other liquid separate into two layers. to which class of biological molecules does the unknown liquid most likely belong
Identify which statement describes the following process. 2Ce + 3Cu2+ → 3Cu + 2Ce3+
A-Ce is oxidized because it is losing electrons and Cu is reduced because it is gaining electrons.
B-Ce is oxidized because it is losing electrons and Cu is reduced because it is losing electrons.
C-Ce is reduced because it is losing electrons and Cu is oxidized because it is gaining electrons.
D-Ce is reduced because it is gaining electrons and Cu is oxidized because it is losing electrons.
The correct statement describing the process is A. Ce is oxidized because it is losing electrons and Cu is reduced because it is gaining electrons.
To understand the oxidation and reduction processes in the given chemical reaction, we need to look at the changes in the oxidation states of the elements involved:
The reaction is:
[tex]\[ 2\text{Ce} + 3\text{Cu}^{2+} \rightarrow 3\text{Cu} + 2\text{Ce}^{3+} \][/tex]
For cerium (Ce), it starts with an oxidation state of 0 (since it is an elemental form) and ends up as Ce³⁺ , which means its oxidation state has increased from 0 to +3. An increase in oxidation state indicates that the element has lost electrons, which is the definition of oxidation. Therefore, Ce is oxidized. For copper (Cu), it starts with an oxidation state of +2 (since it is in the form of Cu²⁺ ions) and ends up as elemental copper with an oxidation state of 0. A decrease in oxidation state indicates that the element has gained electrons, which is the definition of reduction. Therefore, Cu is reduced. The correct description of the process is that Ce is oxidized because it loses electrons, and Cu is reduced because it gains electrons, which corresponds to option A. The other options contain incorrect descriptions of the oxidation and reduction processes for Ce and Cu.What is the mass of 1.71 ✕ 1023 molecules of h2so4?
Three different sub-atomic particles are described below:
Particle X: Uncharged
Particle Y: Present outside the nucleus
Particle Z: Attracts Particle Y
Which statement is true?
X is a neutron, Y is an electron, and Z is a proton.
X is a neutron, Y is a proton, and Z is an electron.
X is a proton, Y is an electron, and Z is a neutron.
X is an electron, Y is a proton, and Z is a neutron.
Answer:
The first answer
Explanation:
Why? Because i got it right on my test.
I didn't copy of the other persons answer.
What has research determined about the orbit of an electron around a nucleus
Answer:
Check explanation.
Explanation:
INTRODUCTION: Many researches has been done on atoms. One of them is the one done by Both. Bohr research in 1913 on atom made him to proposed the "Bohr Atomic Model''. With this model, Bohr was able to proposed his quantized shell model.
Bohr made modifications to the Model proposed by Rutherford to solve the stability problem.
RESEARCH PROGRESS: with Bohr research, he was able to explain that the angular momentum of electrons are quantized. He explained that electrons can have stable orbits around the nucleus.
Borh was also able to explain the emission and absorption of energy, when electrons jump from one orbit to another.
What is the molarity of a solution containing 8.0 grams of solute in 0.50kg of solvent?
Answer:
0.67m
Explanation:
Marine organisms that are well adapted to drastic changes in salinity would most likely be found in which environment?
a. Hydrothermal vent
b. Estuary
c. Open ocean
d. Deep ocean
K12 the answer is estuary
Hope this helps!
The vapor pressure of water at 25.0 oc is 23.8 torr. determine the mass of glucose (molar mass = 180. g/mol) needed to add to 27.78 moles of water to make a solution that has a vapor pressure of 23.1 torr.
HELP. Check all answers that apply.
Copper oxide is a(n):
atom.
molecule.
subatomic particle.
element.
compound.
How many nad+ are reduced in the β-oxidation of stearoyl-coa to form nine molecules of acetyl-coa?
Which is responsible for the high thermal energy required to melt ice? (1 point)?
Why will oil and water never mix second law of thermodynamics?
How many electrons are involved when two atoms in a molecule are connected by a "double bond"? write the lewis structure of a molecule containing a double bond?
In a double bond, four electrons are shared between two atoms.
When two atoms in a molecule are connected by a double bond, four electrons are involved. This is because a double bond consists of two pairs of electrons that are shared between the atoms. The Lewis structure of a molecule containing a double bond follows specific steps:
Determine the total number of valence electrons available for bonding.
Write a plausible skeletal structure for the molecule with the least electronegative atom typically in the center.
Arrange the electrons to satisfy the octet rule for each atom, which often means forming double or triple bonds to account for all electrons.
Count the number of regions of electron density (lone pairs and bonds) around the central atom. Remember, a single, double, or triple bond counts as one region of electron density.
Ensure the total number of electrons used (bonding plus non-bonding) is equal to the available valence electrons.
Let's consider the molecule of ethene (C2H4) as an example:
Two carbon (C) atoms contribute a total of 8 valence electrons (2 x 4 electrons).
Four hydrogen (H) atoms contribute a total of 4 valence electrons (4 x 1 electron).
The total number of valence electrons is 12.
The Lewis structure shows each carbon atom single-bonded to two hydrogen atoms and double-bonded to each other, with no lone pairs on the carbons, thus satisfying the octet rule.
If the strength of the magnetic field at B is 6 units, the strength of the magnetic field at A is _____.
file:///C:/AOP/SH2016Curric/AOP.COM.Science.09IPC.2015/IntegratedPhysicsandChemistry2015/9/magnetic_field_ex1.gif
The magnetic field strength at point A cannot be determined based solely on the strength at point B being 6 units. Factors such as distance from the magnet, the presence of ferromagnetic materials, and orientation relative to the magnetic lines of force could affect its strength.
Explanation:Unfortunately, there is missing information in your question. The strength of the magnetic field at point A cannot be determined, just with the strength at point B being 6 units. The magnetic field strength can vary depending on factors like the distance from the magnet, if any ferromagnetic materials are near, and the orientation relative to the magnetic lines of force. Without additional context or information, it's impossible to infer the magnetic field strength at point A accurately.
Learn more about Magnetic Field Strength here:https://brainly.com/question/28104888
#SPJ12
What is the pH of blood, given the hydrogen ion concentration is 4.0 × 10-8M?
The pH of blood with a hydrogen ion concentration of 4.0 × 10⁻⁸ M, we use the formula pH = -log[H+]. This results in a pH of approximately 7.4, indicating that blood is slightly alkaline.
The pH of blood given the hydrogen ion concentration, use the formula: pH = -log[H+]
Given: [H+] = 4.0 × 10⁻⁸ M
Step-by-step calculation:
First, find the log of 4.0 × 10⁻⁸log(4.0 × 10-8) = log(4.0) + log(10⁻⁸)log(4.0) ≈ 0.6021log(10-8) = -8Therefore, log(4.0 × 10⁻⁸) ≈ 0.6021 - 8 = -7.3979So, the pH = -(-7.3979) = 7.3979
Conclusion: The pH of blood is approximately 7.4, which is slightly alkaline.
Does the nature of intermolecular forces change when a substance goes from a solid to a liquid or from liquid to gas?
Will maynez burns a 0.8-g peanut beneath 76 g of water, which increases in temperature from 22âc to 46 âc. (the specific heat capacity of water is 1.0 cal/(gââc).)
Of the choices below which one is not an ionic compound quizlwr
NC13 is a compound that is not an ionic compound.
Explanation:Of the compounds listed, the only one that is not an ionic compound is NC13. Ionic compounds are formed between a metal and a nonmetal, where electrons are transferred from the metal atom to the nonmetal atom. Covalent compounds, on the other hand, are formed between nonmetals, where electrons are shared between atoms. In this case, NC13 is covalent because it is composed of nitrogen (a nonmetal) and chlorine (also a nonmetal).
When a neat, ordered chemical is changed into a more disordered chemical, there is an increase in what?
When 7.94 g of xylene was added to 132.5 g of cyclohexane, the freezing point of the solution was -4.9oC. What is the molar mass of xylene?
The number of protons is different for each element and is know as the
A solution containing more than the equilibrium amount is called ________
A capital letter or a combination of a capital letter and a small letter that is used to represent an element is called ____
What is the ph of a 0.01 m solution of the strong acid hno3 in water?
The pH of a 0.01 M solution of the strong acid [tex]HNO\(_3\)[/tex] in water is 2.
To determine the pH of a strong acid solution, we can use the fact that strong acids completely dissociate in water. This means that for a 0.01 M solution of [tex]HNO\(_3\)[/tex], all of the [tex]HNO\(_3\)[/tex] molecules dissociate into H⁺ ions and [tex]NO\(_3\)\(^-\)[/tex] ions. Therefore, the concentration of H⁺ ions in the solution is equal to the concentration of the [tex]HNO\(_3\)[/tex] solution, which is 0.01 M.
The pH of a solution is defined as the negative logarithm (base 10) of the hydrogen ion concentration [H⁺]:
[tex]\[ \text{pH} = -\log_{10} [\text{H}^+] \][/tex]
Substituting the concentration of H⁺ ions into the equation gives:
[tex]\[ \text{pH} = -\log_{10} (0.01) \] \[ \text{pH} = -\log_{10} (10^{-2}) \] \[ \text{pH} = -(-2) \] \[ \text{pH} = 2 \][/tex]
Thus, the pH of a 0.01 M [tex]HNO\(_3\)[/tex] solution is 2.
Olympic athletes have lower resting heart rates because
( pls help me) brainlest answer too
4.) Heat is transferred through a piece of metal by _____.
conduction
convection
radiation
5.) Heat from the sun travels to earth by _____.
conduction
convection
radiation
6.) Energy in a vacuum travels by ___.
conduction
convection
radiation
7.) In a convection current _____.
A.) warm fluid sinks to replace cool fluid
B.)warm fluid is more dense, and therefore, rises
C.)cool fluid is more dense, and therefore, sinks
D.)heat flows from cooler areas to warmer areas
8.) Nuclear reactions occurring in the Sun _____. Select all that apply.
generate light
generate heat
absorb a lot of energy
fuse atoms of hydrogen to make helium atoms
9.) Which of the following statements is true?
A.) Temperature is an average measure of the heat energy in a substance.
B.)The transfer of heat in a fluid does not require physical contact between molecules.
C.)The sun's energy comes from the nuclear reactions of changing hydrogen into helium.
D.)All of the above.ω∵
Determine the percent yield for the reaction between 3.74 g of na and excess o2 if 5.34 g of na2o2 is recovered.
The percentage yield for the reaction is 84.2%.
What is percent yield?Percent yield is the difference in the percent of theoretical yield to the percent of actual yield.
The reaction is
[tex]\rm2Na + O_2 = Na_2O_2[/tex]
Mass of Na = 3.74g
Calculating the moles of Na
[tex]\rm Number\;of \;moles= \dfrac{mass}{molar\;mass}\\\\\\Number\;of \;moles= \dfrac{3.74}{23}= 0.162 \;mol[/tex]
The ratio of mole of Na : (Na₂O₂) = 2:1
[tex]\rm Number\;of \;moles= \dfrac{0.162}{2}= 0.081 \;mol\\\\mass\;of Na_2O_3 = 0.081 \times 78\;g/mol\\\\mass\;of Na_2O_3 = 6.341\;g\\\\\\Yield \;of\;reaction = \dfrac{5.34g}{6.341g} \times 100 = 84.2\%[/tex]
Thus, the percent yield is 84.2%.
Learn more about percent yield, here
https://brainly.com/question/2506978
What is the atomic nucleus made of ?
only neutrons
electrons
only protons
nucleons
The atomic nucleus is made of Nucleons
In a reaction, a gas being produced is