Explanation:
In a vacuum (no air resistance), it doesn't. All falling objects, regardless of mass, accelerate at the same rate.
However, when air resistance is taken into account, heavier objects indeed fall faster than lighter objects, provided they have the same shape and size. For example, a lead ball falls faster than a styrofoam ball.
To understand why, first look at what factors affect air resistance:
D = ½ρv²CA
where ρ is air density,
v is velocity,
C is drag coefficient,
and A is cross sectional area.
As falling objects accelerate, they eventually reach a maximum velocity where air resistance equals weight. This is called terminal velocity.
D = W
½ρv²CA = mg
v = √(2mg/(ρCA))
If we increase m while holding everything else constant, v increases. So two objects with the same size and shape but different masses will have different terminal velocities, with the heavier object falling faster.
Before you ask why, you need to know whether.
On the moon, or any other airless body, all objects fall together, no matter how much each one weighs. We've known this for a good 500 years.
On Earth, if one object falls slower, it's only because the air caught it and held it back.
5. How far has a cyclist traveled if she has been moving at 30 m/s for 5.0 minutes?
Answer:
9000 m
Explanation:
To calculate the distance traveled by cyclist, using the relation between distance, velocity and time as
d = v × t
Here, d is distance traveled, v is velocity and t is time taken.
We have, v = 30 m/s and t = 5 min = 5×60= 300 s.
Substituting these values in above formula we get
d = 30 m/s × 300 s
d = 9000 m.
Thus, the distance traveled by cyclist is 9000 m.
A ball rolled 10 meters in 2 seconds. Its velocity is m/s
Answer:
velocity is 5m/s
Explanation:
data
d=10m
t=2sec
v=?
from
v=d/t
v=10m/2s
v=5m/s
Its SPEED is (10m/2s) = 5 m/s .
It's not possible to determine its velocity from the given information, because we don't know the direction in which it rolled.
5. How much does a suitcase weigh if it has a mass of 22.5 kg?
Answer:
Weight of the suitcase, W = 220.5 N
Explanation:
It is given that,
Mass of the suitcase, m = 22.5 kg
Let W is the weight of the suitcase. The weight of an object is equal to the force acting on it due to the gravity. It is given by the product of mass and acceleration due to gravity.Mathematically, it is given by :
W = mg
[tex]W=22.5\times 9.8[/tex]
W = 220.5 N
So, the weight of the suitcase is 220.5 N. Hence, this is the required solution.
The weight of the suitcase is 220.5 Newton.
Given the following data:
Mass of suitcase = 22.5 kilograms.We know that acceleration due to gravity (a) for an object is equal to 9.8 meter per seconds square.
To find how much this suitcase weigh, we would determine the weight of the suitcase by using the value of its mass.
Mathematically, the weight of an object is calculated by using the formula;
[tex]Weight = mg[/tex]
Where:
m is the mass of an object. g is the acceleration due to gravity.Substituting the values into the formula, we have;
[tex]Weight = 22.5[/tex] × [tex]9.8[/tex]
Weight = 220.5 Newton.
Therefore, the weight of the suitcase is 220.5 Newton.
Read more: https://brainly.com/question/18320053
A car goes from 90.0m/s to a stop in 3.00s. What is the acceleration
Answer:
[tex]-30m/s^{2}[/tex]
Explanation:
The first equation of motion given as,
v = u +at
Here, u is initial and v is final velocity and a is acceleration and t is time taken.
As per question car initial velocity, u = 90 m/s, final velocity, v =0 and time taken, t = 3.00 s.
Substituting these values in first equation of motion, we get
0 = 90 m/s + a×3.00 s
or, [tex]a = \frac{-90m/s}{3.00s}[/tex]
[tex]a=-30m/s^{2}[/tex]
Thus, the deacceleration of the car is [tex]-30m/s^{2}[/tex]
The acceleration of the car that goes from 90.0 m/s to a stop in 3.00s is -30.0 m/s².
The acceleration of the car can be calculated by using the equation:
Acceleratin = (final velocity - initial velocity) / time
= (0-90)/3
= -30.0 m/s².
In the graph, which region shows nonuniform positive acceleration?
A.AB
B.BC
C.CD
D.OA
Answer: A.AB
Explanation:
This Velocity vs Time graph shows the acceleration of a body or object, since acceleration is the variation of velocity in time.
As we can see in the attached image, the graph can be divided in four segments:
OA: In this segment the acceleration is changing at a uniform rate. In addition we can see it has a positive slope, hence we are dealing with a positive uniform acceleration.
AB: In this segment the acceleration is changing at a nonuniform rate, since in this part it is not possible to calculate the slope. However if this were uniform, the slope woul be positive. This means the acceleration is nonuniform and positive.
BC: In this segment the acceleration is changing at a nonuniform rate, since in this part it is not possible to calculate the slope. However if this were uniform, the slope woul be negative. This means the acceleration is nonuniform and negative.
CD: In this segment the acceleration is changing at a uniform rate. In addition we can see it has a negative slope, hence we are dealing with a negative uniform acceleration.
From all these segments, the only one that fulfils the nonuniform positive acceleration condition is option A:
Segment AB
Answer:
AB plato users ;)
Explanation:
a ball is rolled down hill with an initial velocity of 4.2 m/s. how far will it roll in 11.6s if it accelerates at 2.3m/s2
Explanation:
Given:
x₀ = 0 m
v₀ = 4.2 m/s
t = 11.6 s
a = 2.3 m/s²
Find: x
x = x₀ + v₀ t + ½ at²
x = 0 m + (4.2 m/s) (11.6 s) + ½ (2.3 m/s²) (11.6 s)²
x ≈ 203 m
Round as needed.
Please help me with this question
A body is dropped from a height h from the state of rest. It covers a distance of 9h/25 in the last second. What is the height from which the body falls?(in meters)
A. 12.5
B. 1.25
C. 125
D. Zero
Answer:
C. 125
Explanation:
Given:
y₀ = h m
v₀ = 0 m/s
a = -10 m/s²
@ t − 1, y = 9/25 h m
@ t, y = 0 m
Find: h
Use constant acceleration equation:
y = y₀ + v₀ t + ½ at²
@ t:
0 = h + (0) (t) + ½ (-10) t²
0 = h − 5 t²
h = 5 t²
@ t − 1:
9/25 h = h + (0) (t − 1) + ½ (-10) (t − 1)²
9/25 h = h − 5 (t − 1)²
9/25 h = h − 5 (t² − 2t + 1)
9/25 h = h − 5 t² + 10 t − 5
0 = 16/25 h − 5 t² + 10 t − 5
Substitute:
0 = 16/25 (5 t²) − 5 t² + 10 t − 5
0 = 16/25 t² − t² + 2 t − 1
0 = -9/25 t² + 2 t − 1
0 = 9 t² − 50 t + 25
0 = (t − 5) (9t − 5)
t = 5/9 or 5
Since t > 1, t = 5.
Solving for h:
h = 5 t²
h = 125
A soccer ball is kicked straight upwards with an initial vertical speed of 8.0 m/s. We can ignore air resistance. How long does it take the ball to have a downwards speed of 4.0 m/s?
Answer:
The time the ball it takes to have the downward speed 4 m/s is 1.22 sec.
Explanation:
Lets explain the motion of the ball
The ball is kicked straight upwards with an initial vertical speed of 8.0 m/s
Its velocity decreases util it reaches the maximum height
At the maximum height its velocity is equal to zero
Then it fall down to the ground
We can ignore air resistance
Lets find the time it takes the ball to reach the maximum height
The acceleration of gravity is -9.8 m/s²
The initial velocity is 8 m/s upward
The final velocity is zero
So lets use the rule v = u + gt, where v is the final velocity, u is the initial
velocity, g is the acceleration of gravity and t is the time
u = 8 , v = 0 , g = -9.8
Substitute these value in the equation above
0 = 8 - 9.8 t
Add 9.8 t for both sides
9.8 t = 8
Divide both sides by 9.8
t = 40/49 seconds
The ball falls withe initial velocity zero and increases to reach 4 m/s
The velocity 4 m/s is downward
The acceleration of gravity is 9.8 m/s²
By using the same rule
u = 0 , v = 4 , g = 9.8
4 = 0 + 9.8 t
4 = 9.8 t
Divide both sides by 9.8
t = 20/49
The time the ball it takes to have the downward speed 4 m/s is the sum
of the two times above
The time the ball it takes = [tex]\frac{40}{49}+\frac{20}{49}=\frac{60}{49}=1.22[/tex] seconds
The time the ball it takes to have the downward speed 4 m/s is 1.22 sec.
A man pulls a 50 kilogram box 20 meters across the floor with the aid of a rope tied to the box. The rope makes an angle of 30 degrees with the horizontal. In pulling the box the man exerts a force of 100 newtons. How much work is done by the man?
Answer:
1732.05 J
Explanation:
The man is doing 100N of force on the rope at an angle of 30° where he is pulling a box 20 meters across the floor.
Work is equal to the force exerted in the direction of motion multiplied by the distance.
Mathematically, Work=F×D×CosineФ
where F=force in newtons
D=displacement in meters
Ф=the angle between the force vector and the direction of motion
Substitute values in formula
Work=100×20×cosine 30°
Work=100×20×0.86602540378
Work=1732.05 J
If you have to choose between being unemployed and accepting a job you do not like, you are likely to experience which type of conflict?
Answer:
Avoidance-Avoidance
Explanation:
You don't want either, but you have to pick one.
Final answer:
The type of conflict that you would likely experience when having to choose between being unemployed and accepting a job you do not like is called an intrapersonal conflict.
Explanation:
The type of conflict that you would likely experience when having to choose between being unemployed and accepting a job you do not like is called an intrapersonal conflict. This type of conflict occurs within an individual when they have conflicting desires or goals. In this case, you may have the desire to be employed and financially stable, but also the desire to find a job that you enjoy and are passionate about.
what does a equal? 3/2 a -13=5
Answer:
a=12
Explanation:
- add 13 to both sides
3/2a = 5+13
- multiply by 2/3
2/3 * 3/2 * a = 2/3 * 18
a = 12
Easy, answer quick! What is diffusion?
Answer:
Diffusion is net movement of anything from a region of higher concentration to a region of lower concentration. Diffusion is driven by a gradient in concentration. The concept of diffusion is widely used in many fields, including physics, chemistry, biology, sociology, economics, and finance.
Explanation:
Diffusion is the passive transport of molecules from an area of higher concentration to an area of lower concentration until the same concentration is reached throughout a space. Only molecules that are soluble in the medium and can cross barriers will diffuse. Variations on diffusion include the processes of filtration and osmosis.
Explanation:Diffusion is a process by which molecules disperse in space in response to differences in concentration. It is a passive transport process, requiring no energy, occurring naturally in various situations such as the dispersal of a sample of gas in a closed container. Molecules move from areas of higher concentration to areas of lower concentration until equilibrium is reached where concentrations are equal throughout.
A principle of diffusion is that only substances which are soluble and can cross the membrane will diffuse through it. This is seen, for example, in the process of osmosis, which is the diffusion of water through a concentration gradient in living systems.
Importantly, in living organisms, the rate of diffusion must match the rate of oxygen uptake and carbon dioxide removal for the process to work effectively.
There are variations to this process, such as filtration and facilitated transport, which also move substances in response to a concentration gradient but may be enhanced by other factors such as pressure.
Learn more about Diffusion here:https://brainly.com/question/29787215
#SPJ12
The main goal of science is to
1)Collect facts and learn “the truth”
2)Understand nature
3)Do wild and crazy experiments
4)Is to produce facts
Answer:
2. Understand nature
Explanation:
The main goal of science is to understand nature, because you need to find the best explanations for how nature works.
1. What is the speed of a truck that travels 10
km in 10 minutes?
Answer:
60 km an hour. If you travel 10 miles in 10 mins there are 60 minutes in an hour so your traveling 60 miles an hour
Explanation:
The speed of the truck is 16.67 m/s
To calculate the speed of the truck, we can use the following formula:
speed = distance ÷ time
In SI notation, we denote speed in meters per second.
So, we convert 10 km to meters (1 km = 1000 m)
⇒ (10 × 1000) m = 10000 m
Now, we convert 10 minutes to seconds (1 minute = 60 seconds)
⇒ (10 × 60) s = 600 s
∴ speed = 10000 m ÷ 600 s = 16.67 m/s
Many theories about atomic structure have molded the current view of the
atom. The quantum model suggests that electrons
Answer:
Orbit around the nucleus at specific energy levels
Explanation:
In the quantum model of the atom (Bohr's model), electrons orbit the nucleus at specific orbits corresponding to specific energy level - this means that an electron cannot be found in the space between two orbits.
Since each orbit correspond to a a precise energy level, this means that the spectrum of emission and absorption of an atom is discrete. In fact:
- When an electron jumps from a lower energy level to a higher energy level, it absorbs a photon whose energy is equal to the difference in energy between the two levels - so photons of only specific frequencies are absorbed
- When an electron jumps from a higher energy level to a lower energy level, it emits a photon whose energy is equal to the difference in energy between the two levels - so photons of only specific frequencies are emitted
Rachel and her family live in a region where Cacti, shirt grasses, and small bushes flourish. In which Boone do they live?
Answer:
Most likely the Savanna or Desert.
Explanation:
Answer:
Explanation:
Rachel and her family is most suppose to be living in a desert area.
The forest and vegetation of a desert is similar to what described location of Rachel family. The region has Cacti, short grasses and small bushes flourish.
These natural vegetation is grown in desert as they do not need much water for there growth.
list these liquids from densest to least dense: water, oil, gasoline, seawater, and corn syrup.
Answer:
Greatest ~ Corn Syrup, Seawater, Water, Oil, Gasoline ~ Least
Explanation:
Density (g/mL)
Corn Syrup: 1.4 g/mL
Seawater: 1.029 g/mL
Water: 0.997 g/mL
Oil: 0.93 g/mL
Gasoline: 0.7489 g/mL
We have that for a list from densest to least dense we have
Corn syrup(1,380kg/m^3)Water (1026kg/m^3)Water (997kg/m^3)Oil(700–950 kg/m^3)Gasoline,(700–800 kg/m^3)
From the question we are told
list these liquids from densest to least dense:
Water,Oil,Gasoline,seawater, Corn syrup.
Generally
Density
This is simply defined as the ratio of mass to volume of a material or substance
Therefore
For a list from densest to least dense we have
Corn syrup(1,380kg/m^3)Water (1026kg/m^3)Water (997kg/m^3)Oil(700–950 kg/m^3)Gasoline,(700–800 kg/m^3)
For more information on this visit
https://brainly.com/question/23379286
A cube made Of an unknown material has a height of 9 symeters the mass of this cube is 3645 g. calculate the density of this cube given this information
Answer: [tex]5 \frac{g}{cm^{3}}[/tex]
Explanation:
The density [tex]\rho[/tex] of a material is given by:
[tex]\rho=\frac{m}{V}[/tex] (1)
Where:
[tex]m=3645 g[/tex] is the mass of the cube
[tex]V[/tex] is the volume of the cube
Now, the volume of a cube is equal to the length [tex]L[/tex] of its edge to the power of 3:
[tex]V=L^{3}[/tex] (2)
If we know [tex]L=9 cm[/tex], the volume of this cube is:
[tex]V=(9 cm)^{3}=729 cm^{3}[/tex] (3)
Substituting (3) in (1):
[tex]\rho=\frac{3645 g}{729 cm^{3}}[/tex] (4)
[tex]\rho=5 \frac{g}{cm^{3}}[/tex] This is the density of the cube
If the distance between two charge particles is increased by four, the force will decrease by a factor of
Answer:
16
Explanation:
the force is inverse squred proportaional to the distance
Answer:
16
Explanation:
just did it on edg
A top-fuel dragster accelerates from rest to a velocity of 100 m/s in 8s. What is the acceleration
Answer:
Explanation:
a=v-u/t
v=final velocity
u=initial velocity
u=0(when a body starts from rest the initial velocity is 0)
v=100m/s
t=8s
a=100-0/8
=12.5m/s²
What are four examples of properties?
Explanation:
physical and chemical properties. Examples of physical properties are: color, smell, freezing point, boiling point, melting point, infra-red spectrum, attraction (paramagnetic) or repulsion (diamagnetic) to magnets, opacity, viscosity and density. There are many more examples.
9. A wave on Beaver Dam Lake passes by two docks that are 40.0 m apart.
a. If there is a crest at each dock and another three crests between the two docks, determine the
wavelength.
b. If 10 waves pass one dock every 16.0 seconds, determine the period and frequency of the wave.
.
c. What is the speed of the wave?
Answers:
a) 10 m
b) time=1.6 s, frquency=0.625 Hz
c) 6.25 m/s
Explanation:
a) If there is a crest at each dock and another three crests between the two docks, and the wavelength [tex]\lambda[/tex] is the distance between to crests; this means we have [tex]4\lambda[/tex] in [tex]40 m[/tex]:
[tex]40 m=4\lambda[/tex]
Clearing [tex]\lambda[/tex]:
[tex]\lambda=\frac{40 m}{4}[/tex]
[tex]\lambda=10 m[/tex]
b) This part can be solved by a Rule of Three:
If 10 waves ---- 16 s
1 wave ----- [tex]T[/tex]
Then:
[tex]T=\frac{(1 wave)(16 s)}{10 waves}[/tex]
[tex]T=1.6 s[/tex] This is the period of the wave
On the other hand, the frequency [tex]f[/tex] of the wave has an inverse relation with its period [tex]T[/tex]:
[tex]f=\frac{1}{T}[/tex]
[tex]f=\frac{1}{1.6 s}[/tex]
[tex]f=0.625 Hz[/tex] This is the frequency of the wave
c) The speed [tex]v[/tex] of a wave is given by the following equation:
[tex]v=\frac{\lambda}{T}[/tex]
[tex]v=\frac{10 m}{1.6 s}[/tex]
Finally:
[tex]v=6.25 m/s[/tex]
The acceleration of segment D is m/s2. Rank segments A, B , C from least accelerations to greatest acceleration. Least
Greatest
Segment D is -20 m/s squared
C
B
A
I know because I just did this
Segments A, B, and C can be ranked from least to greatest acceleration based on the given information.
Explanation:The segments A, B, and C can be ranked from least to greatest acceleration as follows:
Segment C: The acceleration is zero, indicating that there is no change in velocity.Segment A: The acceleration is constant and positive, meaning there is a gradual increase in velocity.Segment B: The acceleration is constant and larger in magnitude than segment A, indicating a faster increase in velocity.Learn more about Ranking accelerations here:https://brainly.com/question/20389053
#SPJ11
A scientific theory Question 4 options: Holds the highest level of acceptance Explains a number of facts Uses specific hypotheses and descriptive laws that have been well-tested All of the above None of the above
Answer:
All of the above
Explanation:
Scientific theories are explanations of various well known facts. They are hypotheses that best explain a scientific phenomenon. More development of theories doesn’t make it acceptable.
Instead they have to supported by the results of several tests performed by employing proper scientific methods. It is only after several years of thorough scientific research a theory is accepted as the best explanation of a phenomenon. Unlike facts that are accepted as universal truths theories can be proven wrong over time .
Answer:
all of the above
Explanation:
How does a molecule form?
Answer:
Molecules are made up of atoms that are held together by chemical bonds. These bonds form as a result of the sharing or exchange of electrons among atoms. The atoms of certain elements readily bond with other atoms to form molecules. Examples of such elements are oxygen and chlorine.
Explanation:
A molecule forms from electrons shared between two atoms. The correct option is B.
Atoms join forces and engage in interaction to create molecules. To achieve a stable electron configuration, this frequently entails sharing electrons between atoms.
Covalent bonds, a sort of chemical bond, are made possible by this sharing of electrons.
The exchange of electrons between two atoms at their outermost energy levels, or valence shells, results in covalent bonds.
Atoms can acquire a more stable structure and fill their outermost energy levels by sharing electrons, just like the noble gases do.
The atoms can achieve a lower overall energy state thanks to this electron sharing, which makes the molecule more stable than the sum of its parts.
Thus, the correct option is B.
For more details regarding molecules, visit:
https://brainly.com/question/32298217
#SPJ4
PLEASE HELP!!
The centers of two 15.0-kilogram spheres are separated by 3.00 meters. What is the magnitude of the gravitational force that one sphere exerts on the other?
A
1.11 × 10-10 N
B
3.34 × 10-10 N
C
1.67 × 10-9 N
D
5.00 × 10-9 N
Answer:
C 1.67 × 10-9 N
Explanation:
The magnitude of the gravitational force between two objects is given by:
[tex]F=G\frac{m_1 m_2}{r^2}[/tex]
where
G is the gravitational constant
m1 ,m2 are the masses of the two objects
r is their separation
In this problem, we have:
[tex]m_1 = m_2 = 15.0 kg[/tex]
r = 3.00 m
Substituting into the equation, we find
[tex]F=(6.67\cdot 10^{-11}) \frac{(15)(15)}{3.00^2}=1.67\cdot 10^{-9} N[/tex]
The gravitational force between two 15.0 kg spheres separated by 3.00 meters is calculated to be approximately 1.67 × 10⁻⁹ N. Therefore, the correct answer is option C.
Newton's Law of Universal Gravitation:
F = G * (m₁ * m₂) / d²where,
F is the gravitational forceG is the gravitational constant (6.674 × 10⁻¹¹ N·m²/kg²) m₁ and m₂ are the masses of the spheresd is the distance between their centers.Plugging in the given values:
F = 6.674 × 10⁻¹¹ N·m²/kg² * (15.0 kg * 15.0 kg) / (3.00 m)²F = 6.674 × 10⁻¹¹ N·m²/kg² * 225 kg² / 9.00 m²After simplifying:
F ≈ 1.67 × 10⁻⁹ NThus, the correct answer is C (1.67 × 10⁻⁹ N).
A rocket moves upward, starting from rest with an acceleration of +30.0 m/s2 for 5.00 s. It runs out of fuel at the end of this 5.00 s and continues to move upward. How high does it rise? m
Answer:
The distance covered by the rocket after fuel ran out is [tex]3442.04 m[/tex]
Explanation:
Given that the rocket moves with an acceleration [tex]a=30m/s^2[/tex]
time [tex]t=5 s[/tex]
Since the rocket starts from rest initial velocity [tex]u=0 s[/tex]
The distance it travelled within this time is given by [tex]s=ut+ \frac{1}{2} at^2[/tex] [tex]=0 \times 5+ \frac{1}{2} (30\times25)=375 m[/tex]
Velocity at this point is given by [tex]v=u+at[/tex]
[tex]v=0+30\times5=150m/s[/tex]
Given that at this height it runs out of fuel but travels further. Here final velocity [tex]v=0[/tex](maximum height), initial velocity[tex]u=150 m/s[/tex] and time to zero velocity [tex]t=\frac{v}{g} = \frac{150}{9.8} =15.3 s.[/tex]
Thus it travels [tex]15.3 seconds[/tex] more after fuel running out. The distance covered during this period is given
[tex]s= ut+\frac{1}{2} gt^2=150 \times 15.3+1/2 \times9.8 \times 15.3^2=3442.04 m[/tex]
20. In a parallel RL circuit, 10 mA flows through the resistor and 4 mA flows through the inductor. What phase angle separates voltage and current in this circuit?
A. 18.6°
B. 28.6°
C. 24.6°
D. 21.8°
Answer:
Option D: 21.8 degrees
Explanation:
In a parallel RL circuit, the current in the resistor R and that in the inductor L are separated among themselves 90 degrees as illustrated in the attached image. In the image the current in the resistor is represented in orange, that of the inductor in blue, and the total current (vector addition of the previous two) is represented in red, forming a certain angle (theta) with respect to the current in the resistor. The output voltage is the same as the input voltage as measured over the resistor R.
Therefore, the phase angle that separated output voltage and total current can be obtained using the fact that tan(phase angle) = [tex]\frac{I_l}{I_R} = \frac{x}{y} \frac{4}{10}[/tex], therefore the angle is the arctangent of 4/10:
[tex]arctang(\frac{4}{10} )= 21.801[/tex] degrees.
Answer:
The phase angle between voltage and current in a parallel [tex]RL[/tex] circuit is 21.8°
Explanation:
In this question input voltage [tex]V_i_n[/tex] across both the components, the resistor and inductor is same since it is a parallel [tex]RL[/tex] circuit.
Current cross resistor [tex]I_R=10 mA[/tex]
Current across inductor [tex]I_L=2 mA[/tex]
Inductive reactance [tex]X_L= \frac{ V_i_n}{I_L} = \frac{V_i_n}{(2 mA)}[/tex]
Resistance of the resistor [tex]R= \frac{V_i_n}{I_R} = \frac {V_i_n}{(10 mA)}[/tex][tex][/tex]
Phase angle between voltage and current ∅ [tex] =tan^-^1 R/X_L[/tex]
[tex]=tan^-^1 \frac{(V_i_n /10)}{(V_i_n /2)}= tan^-^1 \ \frac{2}{10}=tan^-^1\ 0.4[/tex]
=21.8°
For our statistical definition of entropy, we use the equation S = klnW. In this equation, what does k represent? A. kelvin B. Fludd's constant: 6.02 × 1023 C. Carnot's constant: 9.8 × 10–8 D. Boltzmann's constant: 1.38 × 10–23
In the equation [tex]S=klnW k[/tex] represents Boltzmann constant
Answer: Option D
Explanation:
Entropy is defined as the degree of randomness of a system. In the given equation S represents entropy of the gas, k represent Boltzmann constant and W represents number of micro states possible.
W or number of micro states means the number of ways atoms and molecules ca be arranged in a thermodynamic system. When number of micro states is more the degree of randomness namely the entropy is more.
In solid to liquid transformation the entropy increases. Similarly liquid to gas transformation also increases the entropy of the system increases.
Answer: D.
Boltzmann's constant: 1.38 × 10⁻²³
Explanation: edmentum
Which is an example of something heated by conduction?
food heated in a microwave oven
a waffle iron heated by coils
pavement heated by the sun
a room heated by moving air
Answer:
A waffle iron heated by coils
Explanation:
A waffle iron heated by coils - conduction
Food heated in a microwave oven - radiation
Pavement heated by the sun - radiation
A room heated by moving air - convection