Why was the Constitution written, according to the Preamble? A. to create a more perfect Union B. to end slavery C. to break free from Britain D. to give women the vote

Answers

Answer 1
Hello,

The answer is option A "to create a more perfect Union".

Reason:

The constitution was created in order to form a better Union. Its not option B because the constitution is the very first step to forming the better country slavery wasn't abolished then Its also not option C because we broke free of Britain using "taxation without representation" which helps the colonists break free from Britain. Its also not option D because the country was already before women gained there rights.

If you need anymore help feel free to ask me!

Hope this helps!

~Nonportrit

Related Questions

An atom with 7 protons, 6 neutrons, and 7 electrons has an atomic mass of _____ amu. (Enter a whole number.)

Answers

It would be 13, the number of protons is equal to the atomic number. Which makes this nitrogen. You then add the protons and neutrons to make the mass
7+6=13


What is the periodic table of elements? 

Question 5 options:a chart that organizes all the elements by their atomic number a chart that organizes all the naturally-occuring elements a chart that organizes all the elements by their atomic mass a chart that organizes all the elements created by humans 

Answers

a chart that organizes all elements by their atomic number.

What is the total amount of energy absorbed by the substance as it completely changes from a solid at 40 degrees Celsius to a gas at 200 degrees celcius
Please help me !!!

Answers

Final answer:

The total amount of energy absorbed by a substance as it changes from a solid to a gas at different temperatures can be calculated using the formula Q = m × ΔH. First, calculate the energy required to raise the temperature of the substance. Then, calculate the energy required for the phase changes. Finally, add all the energy values together to find the total amount of energy absorbed.

Explanation:

The total amount of energy absorbed by a substance as it completely changes from a solid to a gas can be calculated using the formula:

Q = m × ΔH

Where:
- Q is the total energy absorbed
- m is the mass of the substance
- ΔH is the enthalpy change of the substance

First, calculate the energy required to raise the temperature of the substance from 40°C to its melting point. Then, calculate the energy required to change the substance from a solid to a liquid. Next, calculate the energy required to raise the temperature of the substance from its melting point to its boiling point. Finally, calculate the energy required to change the substance from a liquid to a gas. Add all these energy values together to find the total amount of energy absorbed.

Learn more about total energy absorbed here:

https://brainly.com/question/27508106

#SPJ12

demonstrate that plants use photosynthesis to grow throughout their lives

Answers

By definition, photosynthesis is the process made by green plants, algae and some other forms of bacteria to make their own food by converting carbon dioxide and water into glucose.

So how important is photosynthesis to plants? It is as important as how humans need food in order to survive. Plants also need food and energy to survive and grow. 

Not only food is the important matter to be addressed when it comes to photosynthesis. It is also important for plants' cellular respiration. These processes are constantly made by plants throughout their entire life. 

A 1,600 kg car is traveling with a speed of 20 m/s. Find the net force that is required to bring the car to a halt in a distance of 50m. Use the formula: a= (vf2-vi2)/2d regarding the relation among acceleration a, final velocity vf, initial velocity vi, and the traveled distance of an object d.

Answers

256N. I love physics so.... yerp

Net force that is required to bring the car to a halt =6400 N

Explanation:

Using kinematic equation to calculate the acceleration a

Vf²= Vi²+ 2 a d

Vf= final velocity=0

Vi= initial velocity= 20 m/s

a= acceleration

d= distance=50 m

0²= (20)²+ 2 a (50)

a=-4 m/s²

Now force= F = ma

m= mass= 1600 kg

F= 1600 (-4)

F=-6400 N

negative sign indicates that the force is opposing the motion of the car.

A balloon drifts 50 m toward the east in 6 s; then the wind suddenly changes and the balloon flies 30 m toward the west in the next 5 s. What was the balloon's total displacement?

Answers

Displacement of an object is equal to distance from starting point to end point.

Let's use positive numbers for movement towards east and negative numbers fro movements towards west. First movement is +50m, second movement is -30m. We add these numbers to find displacement.
[tex]d=+50m-30m \\ d=20m[/tex]

Total displacement is 20m towards east.

When the moon is waning, what do we see?

A. none of the moon is visible
B. more and more of the moon
C. a full moon
D. less and less of the moon

Answers

D. less and less of the moon
Hope it helps!

Answer:

D. Less and less of the moon.

Explanation:

Waning has the meaning decreasing. A waning moon is the moon that decreases in size and its illumination . Moon starts waning a day after the full moon. Its size keeps decreasing and ultimately it is not visible on the new moon day .

A day after the new moon, it starts increasing in size and brightness and is slowly visible each night, until it is completely shining on the full moon day again. This is the waxing of the moon, where its size keeps increasing.

Brainiest for Right Person!

1. What is the force on an object due to its mass and gravity called?

A)Kilograms
B)Velocity
C)Weight
D)Pounds

2. Which of the following best describes gravitational force?

A)An attraction between two objects that have mass
B)An attraction between two objects due to their electrons
C)The force that keeps atoms and molecules bound together
D)The force that keeps objects from moving when they are at rest

3. How does distance between two objects affect their gravitational force?

A) Force increases as distance increases.
B)Force decreases as distance increases.
C)Force decreases as distance decreases.
D)Force is not related to distance.

4. Imagine you are an astronaut and you travel to a planet with a much larger mass than Earth. How would this affect your weight? Explain your answer.

Answers

C)Weight

A)An attraction between two objects that have mass

B)Force decreases as distance increases.

grav force of massive planet increases your weight

Answer:

C)Weight

A)An attraction between two objects that have mass

B)Force decreases as distance increases.

Explanation:



Suppose Eratosthenes’ results for Earth’s circumference were quite accurate. If the diameter of Earth is 12,740 km, what is the length of his stadium in kilometers?

Answers

The Results For Earth's Circumcised were quite accurate. the diameter of earth is 12,740 km, the length of the stadium would be 1,140 km. 

Answer:

Length of one stadium = 0.1556 km

Explanation:

We have the diameter of Earth = 12740 km

Thus, circumference (C) of Earth is

[tex]=2\pi \frac{Diameter}{2} \\[/tex]

[tex]=2\times \pi \times \frac{12740}{2}[/tex]

C = 40023.89 km

Eratosthenes was a Greek polymath. He was the first to calculate the circumference of Earth. He had observed that at local noon on day of Summer Solstice, when Sun is overhead for the locations on Tropic of Cancer, a place named Syene had zero shadow day. Also on the same day the objects in Alexandria casts shadow. This proved that Earth is spherical and not flat. He went further and calculated the Sun angle ([tex]\theta[/tex]) for Alexandria by using a Rod (Gnomon). He found the angle to be about 7°. He also knew the distance (D) between Alexandria and Syene which was 5000 Stadia.

Lets say length of one stadia = S km

He used this data and simple concept of geometry as given below:

[tex]\frac{\theta }{360}=\frac{D}{C}[/tex]

[tex]=\frac{7}{360}=\frac{5000 \times S}{40023.89}[/tex]

[tex]=5000 \times S = \frac{7\times 40023.89}{360}[/tex]

[tex]=S = \frac{7\times 40023.89}{360\times5000}[/tex]

S = 0.1556 km

What best describes the degree to which a material can transmit heat

- melting point
- boiling point
- thermal conductivity
- electrical conductivity

Answers

BOILING POINT BECAUSE BOILING POINT IS THE POINT AT WHICH A MATERIAL OR SUBSTANCE IS MADE PURE AND FOR A SUBSTANCE TO BE MADE PURE IT NEED TO ABSORB AND GIVE OUT HEAT COS BOILING REACTION IS EXOTHERMIC

The correct answer is C. Thermal conductivity

Explanation:

Conduction occurs as heat, electricity, etc. are transmitted from one body to another. In the case of thermal conductivity, this refers to the property of one material or body to transmit or conduct heat. This property is measured in Watts (energy) per meter(distance)-Kelvin (temperature). For example, the thermal conductivity of copper is around 385 while the one of ice is 1.6, which indicates copper has a higher capability to conduct heat. Thus, the degree to which a material can transmit heat is thermal conductivity.

process where sediment and other material is moved from one place to another is called blank?

Answers

deposition is the movement of sediment and other materials

what i the difference between a wedge and an inclined plane

Answers

This is what I found! I hope this helps :)

A student who runs every day is becoming bored with her physical fitness routine and considers quitting. What is the most effective thing she can do to maintain her active lifestyle?

Answers

Answer:

Explained

Explanation:

A student who runs every day is becoming bored with her physical fitness routine and considers quitting. Now in order maintain her fitness routine she needs to break the monotony by changing her exercise regime. She do other activities like play sports two days a week, she do aerobics, she even try some cardio vascular exercises which as good as running. She also try changing her route of running as the new view might inspire her.

Help me .......science

Notes ; l want answer true..........

Answers

on x-axis age of the baby
on y-axis weight of the baby
Choice-B is the correct one.

PLEASE HELP ME ANSWER THIS!
Which direction will the molecules pass through the cell membrane?

a. From bottom to top
b. From left to right
c. From right to left
d. From top to bottom

Answers

this is biology,
and molecules will move from left to right.

What is the mass of an object that weighs 55N on earth?

Answers

Weight on earth is 55kg
Force = Mass x Acc.
55N=mass x 9.8
so mass =55/9.8=5.61 aprox.
Now on the planet gravity mass is doubled
F =M x 2a
F =5.61x2x9.2
F=110N=110kg weight

With Earth's gravity being [tex]9.80 m/s^2[/tex] the mass is approximately 5.61 kg.

To calculate the mass of an object that weighs 55N on Earth, we need to use the formula for weight, which is w = mg, where w is weight, m is mass, and g is the acceleration due to gravity.

On Earth, g is typically [tex]9.80 m/s^2[/tex]

Therefore, we can find the mass of an object by dividing its weight by this acceleration due to gravity.

To calculate the mass (m) of an object that weighs 55N on Earth:

m = w / g

[tex]m = 55 N / 9.80 m/s^2[/tex]

This calculation results in a mass of approximately 5.61 kg.

I WILL GIVE BRAINLIEST!!!!!!!!



Which statement accurately describes what happens when water turns to steam in terms of energy?



 A. The water absorbs energy which causes chemical bonds to break, changing water to steam.


B.The water releases energy which causes the water molecules to have less kinetic and potential energy, changing their configuration from liquid to gas.


C.The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas.


D.The water releases energy which causes chemical bonds to break, changing water to steam.

Answers

When water changes to steam , you are heating the substance, hence it is absorbing (heat) energy. So 'B' is a reasonable answer. 

Final answer:

Water turns to steam by absorbing energy that increases the kinetic and potential energy of water molecules, allowing them to escape into the air as gas. So the correct option is C.

Explanation:

When water turns to steam, it absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas. During the process of boiling, heat energy increases the water molecules' kinetic energy, leading to the breaking of hydrogen bonds that held water molecules close together. When these bonds break, water molecules can move freely and escape into the air as steam or water vapor. This endothermic transition requires a significant amount of energy due to water's high heat of vaporization.

The correct statement describing this change of state is thus:
C.The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas.

please do the Venn diagram

Answers

A compound is a combination of 2 or more elements. They are chemically combined at fixed proportions. The resulting compound changes the original property of the components. 

A mixture on the other hand is physically combined at variable proportions. The components retain their properties. But like compounds, they also are made up of elements and they can have more than 2 components. 

Attached is a Venn Diagram that shows their differences and similarities. 

If the total number of earthquakes annually averages 14,500 approximately how many are magnitude 5 or higher? and show work.

Answers

  To take a percentage of a number out, simply do the follow: 
Number x Percentage = Answer. 

Therefore: 
14,500x(90/100)=13,050 

To find what percentage a figure represents of a total, do the following simple equation: 
Figure/Total x100 = Percentage. 

So for your Earthquakes, you have a total of: 
Total = 90 + 20 + 5 + 1 = 116 Earthquakes. 

4 to 5 -> 90/116 x100 = 78% to 2 sig. fig. 
5 to 6 -> 20/116 x100 = 17% 
6 to 7 -> 5/116 x100 = 4% 
7+ -> 1/116 x100 = 1% 


The same technique is used everywhere else, sample size divided by total multiplied by 100 gives percentage. Not multiplying by 100 gives you a ratio of 1 that it represents, 1 being 100% (a complete unit). 
Therefore for part 1. of your question I would just do 14,500x0.9=13,050. 
You'll probably see that 90/100 = 0.9 since 90% is identical to writing 90/100 or 0.9.

How much force is needed to stop an 80-kg football player if he decelerates at 5 m/s2? 5 N 16 N 20 N 400 N

Answers

Force=M*A so then it’s the weight of the player times the acceleration which would equal 400N

Answer:

The force needed is 400 Newtons.

Explanation:

The force can be determined by means of Newton's law.

[tex]F = m \cdot a[/tex]  (1)

     

Where F is the force needed to stop the football player, m is the mass of the football player and a is the acceleration.

[tex]F = (80 kg)\cdot (5m/s^{2})[/tex]            

[tex]F = 400 kg.m/s^{2}[/tex]

However, 1N = 1 kg.m/s^{2}

[tex]F = 400 N[/tex]

Hence, the force needed is 400 Newtons.        

Explain mass defect in terms of atomic mass number and atomic mass and explain how gamma radiation is produced.

Answers

The atomic nucleus is made up of neutrons and protons. If you measure its mass, it turns out that, it is always smaller than the sum of individuals masses of protons and neutrons that it is made of.
We call this difference a nuclear binding energy. This energy is used to hold the nucleus together. According to Einstein's famous formula:
[tex]E=mc^2[/tex]
Mass and energy are the same thing, or rather, a manifestation of the same thing. They are interchangeable. 
Some of the nucleus mass is used as energy to keep it together:
[tex]\Delta m=mc^2[/tex]
Gamma radiation is produced during gamma decay. 
When a nucleus undergoes alpha or beta decay it can be left excited. 
An excited nucleus is unstable, it has an excess energy. A nucleus that is excited emits a photon to get rid of this excess energy and we call this process gamma decay. During a gamma decay, no particles are eject from the nucleus. Gamma rays are simply photons that have very high energies.




Which of the following is true about diffraction?

a. Sounds with a larger wavelength bend around obstacles more easily.
b. Sounds with a smaller wavelength bend around obstacles more easily.
c. Sounds with higher energies bend around obstacles more easily.

Answers

Diffraction is sounds with a larger wavelength to bend around obstacles more easily. Therefore, option A is correct.

What is diffraction ?

Diffraction is the interference or bending of waves via an aperture into the area that is geometrically in the shadow of the obstruction or aperture. Effectively, the wave's secondary source is the diffracting element or aperture.

The bending of waves with a larger wavelength around objects or through apertures with a shorter wavelength results in wave diffraction. If this condition is satisfied, diffraction can occur for both light and sound waves.

Wavelengths of visible light span from 380 to 700 nanometers. Light must pass through an opening that is smaller than 1,000 nanometers for diffraction to take place.

Thus, option A is correct.

To learn more about diffraction, follow the link;

https://brainly.com/question/12290582

#SPJ2

Final answer:

Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles.

Explanation:

Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, the correct answer is option a. Sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles. On the other hand, light waves have very short wavelengths and behave more like rays, so they do not diffract around large obstacles.

anybody wanna help me ? 10 points !!

Answers

Hello!

The answer is D. 6 because, in a balanced atom, the number of protons is equal to the number of electrons.

I hope this helps :))
As far as we can see there are 6 electrons. Electrons are negative and protons are positive. The answer is 6 because to have a balanced charge, there needs to be an equal number of electrons and protons.

Hope this helps! Message me if you have any questions!

A car traveling at 24 m/s starts to decelerate steadily. It comes to a complete stop in 15 seconds.

Answers

a = delta v over delta t delta v is calculated with final velocity less initial velocity so delta v is 0 - 24 that is -24m/s and delta t is calculated with final time less initial time as initial always is 0 then is 15 - 0 that is 15 then a = -24m/s over 15 that is -1,6 then the "acceleration" (on real is a desacceleration) is -1,6m/s^2 (remember that is squared.)

Calculate the acceleration of a car that begins at rest at a stop light and accelerates to a speed of 20m/s in a 10 sec time period. Be sure to include the acceleration formula and the final units.

Answers

a = delta v over delta t delta v is calculated with final velocity less initial velocity then delta v is equals to 20 - 0 that is 20m/s and to calculate delta t is like delta v is final time less initial time as initial time always is 0 the delta t is equals to 10s then a = 20/10 then acceleration is 10m/s^2 (remember that is squared)

a gamma ray is a high energy, high frequency electromagnetic wave that travels at the speed light 3.0 x 10^8 m/s calculate the wavelength of the wave if it's frequency is 10^20hz

Answers


Wavelength = (speed) / (frequency)

                    = (3 x 10⁸ m/s) / (10²⁰ /s)

                    =        3 x 10⁻¹² meters

That's 3 "nano-millimeters" ... about 0.06 of
the diameter of a single Hydrogen atom ! ! !

Magnet A and B are of equal magnetic strength and which position will magnets A&B have the greatest attraction for toward each other

Answers

When they are facing each other, almost touching
Its D.

(sorry the picture got cut off)

The Sierra Nevadas are an example of a fault-block mountain range. Based on this information, which of the following processes formed the Sierra Nevadas?

Answers

This question may require more information to provide a more accurate answer.

A fault block mountain range is formed by tension as rocks are pulled away from each other. A fault block is a section of rock bounded on at least two sides by faults.
Faults commonly break the crust into large, fault bounded blocks. If normal faults down drop one fault block relative to other blocks on either side, the resulting feature is called a Graben.
A block that is uplifted relative to blocks in either side is called a horst.

Answer:

Explanation:

The uplift caused a wide range of elevations and climates in the Sierra Nevada, which are reflected by the presence of five life zones (areas with similar plant and animal communities).

what is the doppler effect

Answers

The Doppler effect is the change in frequency or wavelength of a wave for an observer who is moving relative to the wave source. It is named after the Austrian physicist Christian Doppler, who described the phenomenon in 1842

Answer:

Doppler effect refers to apparent change in frequency/wavelength of the source due to the relative motion between the source and the observer. The frequency increases apparently if the source and observer approach each other and it decreases apparently if the source and the observer move away from each other.

When, apparent frequency increases, it is known as blue-shift and if it decreases, it is known as red-shift.

What Is one of many factors that can determine the rate of alcohol absorption

Answers

The percentage of the drink that finds the target and lands in your mouth.

Answer: The answer is C. Food.

Other Questions
Suzie drew the line of best fit on the scatter plot shown.What is the approximate equation of this line of best fit in slope-intercept form? y = 6 over 5x + 3 y = 3x + 6 over 5 y = 5 over 6x + 3 y = 3x + 5 over 6 Which statement BEST describes the effect of the massive economic growth and industrialization that China has experienced since 1949? This picture shows Lyndon B. Johnson signing the Civil Rights Act in 1964. This law was especially important for Johnson to support because he came from which part of the country? Luisa sells stuffed animals.she sells a stuffed elephant for $34.90, and the sale tax is 6% of the sale price.about how much is the sales tax on the elephant Using foreshadowing at the beginning of a story? A.)can be an effective use of foreshadowing B.) should never be done C.) is usually not an effective use of foreshadowing D.) none of the above 17 students on math team want to raise $483.62 to buy books. They already have raised $218.25.If each student raised the same amount , how much more money must each student raise? HOW DO YOU FIGURE OUT THE SLOPE OF A LINE ON A GRAPH?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! apply the distribution property to produce an equivalent expression 2(7g + 7) which vessel that transports blood to the headA.renal arteryB.dorsal aortaC.carotid arteryD.superior vena cava If you were asked to find the 87th term in a sequence, which formula would you want to be given? A) analog formB) digital formC) explicit formD) recursive form, HELPPPPPPPPPPPPPPPPPPPPPWrite an equation of the line that passes through the points.(2, 5), (0, 5) the lowest-pitched sounds humans can generally hear have a frequency of roughly 20 Hz. What is the approximate wavelength of these sound waves if their wave speed is 340 m/s? A hose dispenses 1,413 cm of water every minute into a cone with a radius of 60 cm and a height of 150 cm. How long will it take to fill the cone? Use 3.14 to approximate pi. Enter your answer in the box. When understanding the need for appropriate citation and source usage, it is important to think of information as a __________? Joint-Serve Prosthetics spends 43% of its total expenses for payroll. It increased its total expenses when it spent $250,000 for robotic assemblers. This changed the allocation for payroll to 38% of total expenses. What were its total expenses after purchasing the robotic assemblers? Hint: First find the total expense before the purchase of robotic assemblers. What was the name of the largest French colony in the West Indies? What is it called today? Why does extracted chlorophyll fluoresce under UV light while chlorophyll inside intact chloroplasts does not? According to ekman's research on facial expressions when people try to hide their feelings with an inauthentic expression, they use different groups of muscles than they do for authentic emotions. there is little support for darwin's evolutionary rationale that certain human facial expressions are innate. when trying to feign sadness, only about 60 percent of people manage to get the eyebrows, eyelids, and forehead wrinkle exactly right. authentic smiles last ten seconds or more whereas false smiles last only about two seconds. What is the correct order of events in Ivan Ilyichs life as depicted in chapters 58 of Tolstoys The Death of Ivan Ilyich? Tiles Ivan Ilyich tries to read a Zola novel while convincing himself that he is healing, but his pain returns worse than ever. Ivan Ilyich tries to distract himself from his death by resuming his professional duties as a judge but fails. Ivan Ilyich visits a specialist who tells him that his vermiform appendix is the problem. Ivan Ilyich tries to use the logic of Caius the mortal to try to make sense of dying but fails. Ivan Ilyich watches his family leave to go to the theater and finally gains some peace. There are 19.6.grams of protein in 4 ounces of cashews. About how many gram of protein are in one ounce of cashews?