Write the balanced nuclear equation for β− decay of sodium−26. include both the mass numbers and the atomic numbers with each nuclear symbol. use the sup-subscript button in the answer palette to enter these numbers correctly. greek letters can be accessed in the drop-down menu that says -select−.

The reaction is second order with respect to reactant A and first order with respect to reactant B, giving an overall reaction order of 3.

To determine the overall order of a reaction, we need to find the individual orders with respect to each reactant.

1. Doubling the concentration of reactant A increases the reaction rate by a factor of four. This indicates that the reaction is second order with respect to A, because 2² = 4.

2. Tripling the concentration of reactant B increases the reaction rate by a factor of three. This means the reaction is first order with respect to B, because 3¹ = 3.

Therefore, the overall order of the reaction is the sum of the orders with respect to each reactant:

The overall order = 2 + 1 = 3.

Answer is 
      Ni²⁺(aq) + 6NH₃(aq) ⇌ [Ni(NH₃)₆]²⁺

its defiantly a solid, because the particles are packed in close together and it has a definite shape and volume. water is lose and not packed in like this. and with gas, the particles would juts fly everywhere and plasma is electricity and a wild card. so its definitely a solid, trust me

Compound J, with the formula C6H10, could be a cyclobutane with two methyl groups creating a chiral center, which becomes a non-chiral cyclohexane (C6H12) upon hydrogenation.

The student's question is related to the identification of the structures of an optically active compound with the molecular formula C6H10, and its hydrogenated form C6H12.

Compound J must be a cycloalkane with a four-carbon ring to fit the given molecular formula and to be optically active, it should contain at least one chiral center. Given that hydrogenation leads to an optically inactive compound (K), it suggests that compound J had one or more chiral centers which become quenched upon hydrogenation.

One possible structure for J could be a cyclobutane ring with two methyl groups bonded to adjacent carbon atoms, creating a chiral center at one of those carbons. Upon hydrogenation, the double bonds are saturated, resulting in a compound with all single bonds, thus removing any chirality and creating an optically inactive compound (K).

The proposed structure for J could be represented as follows (for one of the enantiomers):

And for compound K, after hydrogenation:

Answer:

The consequence of deforestation is discussed below.

Explanation:

Answer:

State

Explanation:

The state of matter depends on the closeness of the particles. Gases have particles that are very far apart and solids are close together. This is determined by the strength of attraction of these particles to one another.

Answer:

32.4%

Explanation:

Step 1: Given data

Mass of the solute = 18.9 g

Mass of the solvent = 39.5 g

Mass of the solution = Mass of the solute + Mass of the solvent = 58.4 g

Step 2: Calculate the mass percent of the solute in the solution

We use the following expression.

[tex]\% m/m =\frac{mass\ of\ the\ solute}{mass\ of\ the\ solution} \times 100\%=\frac{18.9g}{58.4g} \times 100\% =32.4\%[/tex]

Answer:

Explanation:

Radiation is the most important process of heat propagation, because it is through it that the heat of the sun reaches the earth. Without this process there would be no life on earth. While conduction and convection occur only in material media, radiation also occurs in a vacuum, so it is possible for the sun to heat the earth evenly.

The heat radiated by the sun heats the water of rivers, lakes, seas and oceans occurring the phenomenon of evaporation during the water cycle. At this point, the liquid state of water changes to its gaseous state as it moves from the earth's surface to the atmosphere. For this reason we can say that the sun can accelerate the water cycle.

Although the Earth's orbit around the Sun is an ellipse, not a circle, the distance from Earth to the Sun varies by only 3%, with the Earth being closest to the Sun from January 4-7 each year, depending on leap year. But it's easy to remember that the northern hemisphere of the earth is also closer to the sun in January and it's winter there, while it's summer in the southern hemisphere. So we cannot say that the earth is closer to the sun in summer, but between January 4th and 7th.

Living conditions on earth are a puzzle to astronomy. A little closer to the sun - and we'd be a greenhouse and toxic high-pressure gas plant like Venus. A little farther - and the gases would escape, the water would freeze, there would be at most microbes, as on Mars. The earth is the perfect distance to house water, oxygen, carbon and complex life forms.

Surface Waves are seismic waves that propagate to the Earth's surface and result from interference between P waves and S waves (called volumetric waves). It is to the surface waves that are due to the great destruction caused by the earthquakes. The sun does not interfere with the creation of these waves, which is a factor caused by the movement of the earth and other geological terms.

Final answer:

The molecular mass of propanoic acid, an isomer of methyl ethanoate, is 74.09 amu, calculated by the sum of atomic masses of carbon, hydrogen, and oxygen in its molecular formula, C3H6O2.

Explanation:

To calculate the molecular mass of propanoic acid, an isomer of methyl ethanoate, we need to first understand that isomers are compounds with the same molecular formula but different structures, and hence, the same molecular mass. Propanoic acid's molecular formula is C3H6O2. Using the atomic masses of carbon (12.01 amu), hydrogen (1.01 amu), and oxygen (16.00 amu), we calculate the molecular mass as follows:

(3 × 12.01 amu) + (6 × 1.01 amu) + (2 × 16.00 amu) = 36.03 amu + 6.06 amu + 32.00 amu = 74.09 amu

Therefore, the molecular mass of propanoic acid is 74.09 amu.

The three ingredients used in a blast furnace to make pig iron are roasted ore, coke, and limestone.

In a blast furnace, the three ingredients used to make pig iron are:

The combination of these three ingredients undergoes various reactions in different temperature zones of the blast furnace, resulting in the production of molten iron and s_lag.

https://brainly.com/question/31980984

#SPJ6

Answer: The noble gas notation for silicon atom is [tex][Ne]3s^23p^2[/tex]

Explanation:

Noble gas notation is defined as the notation in which the configuration of an atom is written in terms of previous noble gas.

Silicon is the 14th element of the periodic table having 14 electrons.

The nearest noble gas to this element is neon.

So, the noble gas notation for silicon atom = [tex][Ne]3s^23p^2[/tex]

In 7.80 moles of magnesium perchlorate (Mg(ClO4)2), there are approximately 7.80 moles of magnesium atoms, 15.60 moles of chlorine atoms, and 31.20 moles of oxygen atoms.

Magnesium perchlorate (Mg(ClO4)2) consists of one magnesium (Mg) atom, two chlorine (Cl) atoms, and eight oxygen (O) atoms per formula unit. To calculate the number of moles of each element in 7.80 moles of magnesium perchlorate, you can use the mole ratios from the chemical formula.

First, you have 7.80 moles of the entire compound. Since there is one magnesium atom in each formula unit, there are also 7.80 moles of magnesium atoms. Similarly, as there are two chlorine atoms in each formula unit, you have 2 * 7.80 = 15.60 moles of chlorine atoms. Lastly, since there are eight oxygen atoms in each formula unit, there are 8 * 7.80 = 62.40 moles of oxygen atoms. So, in 7.80 moles of magnesium perchlorate, you have approximately 7.80 moles of magnesium atoms, 15.60 moles of chlorine atoms, and 31.20 moles of oxygen atoms.

Learn more about atoms here: https://brainly.com/question/19030729

#SPJ6

Answer: The balanced chemical equation is written below.

Explanation:

Combustion reaction is defined as the chemical reaction in which a hydrocarbon reacts with oxygen gas to produce carbon dioxide gas and water molecule.

If supply of oxygen gas is limited, it is known as incomplete combustion and carbon monoxide gas is also produced as a product.

The chemical equation for this reaction of ethene and oxygen gas follows:

[tex]2C_2H_6+5O_2\rightarrow 4CO+6H_2O[/tex]

By Stoichiometry of the reaction:

2 moles of ethene gas reacts with 5 moles of oxygen gas to produce 4 moles of carbon monoxide gas and 6 moles of water vapor.

Hence, the balanced chemical equation is written above.

When atoms of two or more different elements bond, their properties change.

When two or more atoms of the same element chemically combine, a molecule is created.

Examples: O₂, O₃, H₂

A compound is a type of molecule in which the atom types that make up the molecule differ from one another.

Examples: NaCl, H₂O

Learn more about molecules and compounds here:

https://brainly.com/question/21983682

#SPJ2

Anthracene is a polycyclic aromatic hydrocarbon with chemical formula C₁₄H₁₀. The number of fused rings in Anthracene are three in number. This compound is colorful and is used in the formation of different dyes due to its property of deloclization of pi electrons. All the carbon atoms in Anthracene are sp² hybridized with a trigonal planar structure hence, the Anthracene is planar in nature.

Number of Sigma Bonds:

                                         There are 26 sigma bonds (colored in Blue) in Anthracene among which 10 sigma bonds are between carbon and hydrogen atoms while the remaining are between the carbon atoms.

Number of Pi-Bonds:

                                  There are 7 pi bonds in Anthracene (colored in red). All pi bonds are present between carbon and carbon atoms.

Number of Electrons in Sigma Bonds:

                                                             As one sigma bond is formed by 2 electrons hence, 26 sigma bonds will be formed by 52 electrons.

Number of Electrons in Pi Bonds:

                                                       As one pi bond is formed by the side wise overlap of two p orbitals hence one pi bond is formed by two electrons so, 7 pi bonds will be formed by 14 electrons.

The hybrid orbital that is utilized by the carbon in anthracene is [tex]\boxed{{\text{s}}{{\text{p}}^2}}[/tex] .

The anthracene molecule contains [tex]\boxed{{\mathbf{26}}{\text{ }}{\mathbf{sigma}}}[/tex] bonds and [tex]\boxed{{\mathbf{7}}{\text{ }}{\mathbf{\pi }}}[/tex]  bonds.

The number of valence electrons in sigma orbital is [tex]\boxed{{\mathbf{52}}}[/tex]  and pi-orbitals is [tex]\boxed{{\mathbf{14}}}[/tex] .

Further explanation:

The anthracene is a crystalline compound and it is yellow in color. It contains three fused rings of benzene thus it is a polyaromatic compound.it has a molecular formula [tex]{{\text{C}}_{{\text{14}}}}{{\text{H}}_{{\text{10}}}}[/tex].

Prediction of hybridization:

The hybridization can be determined by calculating the number of hybrid orbitals (X) which is to be formed by the atom. The formula to calculate the number of hybrid orbitals (X) as follows:

[tex]\boxed{{\text{X}}={\text{Number of bond pair}}+{\text{Number of lone pair}}}[/tex]

Here X is a steric number.

When X is 2 then hybridization is sp.

When X is 3 then hybridization is [tex]{\text{s}}{{\text{p}}^2}[/tex].

When X is 4 then hybridization is [tex]{\text{s}}{{\text{p}}^3}[/tex] .

The structure of anthracene is attached in the image.

Since all carbon atom in anthracene contains three bond pairs and no lone pair thus, the hybridization can be calculated as follows:

[tex]\begin{aligned}{\text{X}}&={\text{Number of bond pair}}+{\text{Number of lone pair}}\\&=3+0\\&=3\\\end{aligned}[/tex]

The value of X is 3, therefore, the hybridization of each carbon in anthracene is [tex]{\text{s}}{{\text{p}}^2}[/tex]  

The structure of anthracene contains 26 sigma bond and 7 pi bonds. (refer to the image attached).

The number of valance electron in sigma orbital is twice of the number of sigma bond present in the molecule because every sigma bond contains 2 electrons.

[tex]{\text{Valence electron in sigma orbital}} = 2\left({{\text{sigma bond}}}\right)[/tex]

In anthracene, number of sigma bond is 26, therefore,

[tex]\begin{aligned}{\text{Valence electron in sigma orbital}}&=2\left({{\text{sigma bond}}}\right)\\&=2\left({{\text{26}}}\right)\\&=52\\\end{aligned}[/tex]

The number of valance electron present in pi-orbital is twice of the number of pi bond present in the molecule because every pi-bond contains 2 electrons.

[tex]\begin{aligned}\text{Valence electron in }\pi\text{-orbital}&=2(\pi\text{-bond})\end{aligned}[/tex]

In anthracene, number of pi bond is 7, therefore,

[tex]\begin{aligned}\text{Valence electron in }\pi\text{-orbital}&=2(\pi\text{-bond})\\&=2(7)\\&=14\end{aligned}[/tex]

Learn more:

1. Molecules and polyatomic ions cannot be adequately described using a single lewis structure.: https://brainly.com/question/6786947

2. Determine the lewis structure of butanal.: https://brainly.com/question/6215269

Answer details:

Grade: Senior school

Subject: Chemistry

Chapter: Covalent bonding

Keywords: Anthracene, yellow crystalline, coal tar, structure of anthracene, C14H10, hybrid orbitals.

To calculate the percent of nuclides remaining after 1.9 hours, given a half-life of 32 minutes, we find that about 3.56 half-lives have passed and approximately 9.09% of the original sample remains.

The question concerns the calculation of the remaining nuclides in a sample after a period of time, given the half-life of the substance. If the half-life of a certain type of nucleus is 32 minutes, we first need to calculate how many half-lives are in 1.9 hours. Since there are 60 minutes in an hour, 1.9 hours equals 114 minutes. Dividing 114 minutes by the half-life of 32 minutes gives us approximately 3.56 half-lives.

After each half-life, the amount of a radioactive material will halve. To find the remaining percent, we use the formula:

Therefore, for 3.56 half-lives passed, the calculation is as follows:

Punching this into a calculator, we find that about 9.09% of the original sample remains after 1.9 hours have passed.