You measure the voltage difference of a circuit to be 5 V and the resistance to be 1,000 ohms.
What is the current in the circuit?

Answers

Answer 1

Answer:

The current in the circuit will be [tex]5\times 10^{-3}\ Ampere[/tex].

Explanation:

Given:

Voltage difference = V = 5 V

Resistance              = R = 1000 ohms

To Find:

Current, I = ?

Solution:

Ohm's Law:

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.

i.e  I ∝ V

∴ V = I × R

Where, I = current

           V = voltage

           R = resistance

Substituting the values of V and R we get

∴ 5 = I × 1000

[tex]I = \frac{5}{1000} \\I=0.005\ Ampere\\I=5\times 10^{-3}\ Ampere[/tex]

Therefore, the current in the circuit will be [tex]5\times 10^{-3}\ Ampere[/tex].

Answer 2
Final answer:

The current in the circuit can be found using Ohm's Law (I=V/R). The given values for voltage and resistance result in a current of 5 milliamperes.

Explanation:

The subject matter in the question falls under the field of Physics, particularly Electricity. The problem is asking for the current in a circuit, based on given values for voltage and resistance. One can solve this by employing Ohm's Law, which describes the relationship between voltage (V), resistance (R), and current (I). Ohm's Law is represented by the formula I = V/R.

Substituting the given values into the formula, the current I is calculated as 5V / 1000Ω, which equals 0.005 Amperes, or 5 Milliamperes (mA). Thus, the current flowing in the circuit is 5 mA.

Learn more about Ohm's Law here:

https://brainly.com/question/36009177

#SPJ3


Related Questions

If a car is traveling with a constant velocity of 20m/s westward, what is the net force acting on a car

Answers

The net force on the car is zero

Explanation:

We can answer this question by applying Newton's second law of motion. In fact, we have:

[tex]\sum F = ma[/tex]

where

[tex]\sum F[/tex] is the net force acting on an object

m is the mass of the object

a is its acceleration

In this problem, the car is travelling with a constant velocity: this means that the acceleration of the car is zero (because acceleration is the rate of change of velocity). Therefore,

[tex]a=0[/tex]

So the equation becomes

[tex]\sum F = 0[/tex]

which means that the net force on the car is zero.

Learn more about Newton's second law of motion:

brainly.com/question/3820012

#LearnwithBrainly

A uniforn half metre rule is pivated at its 30cm mark. A mass of 50g hung at the 45cm mark keeps the rule horizontal. determine the mass of the half metre rule​

Answers

Answer:

150 g

Explanation:

From the question;

Half meter rule (50 cm) is pivoted at 30 cm Mass of 50 g Pivoted at 45 cm

It means the mass is 15 cm from the pivot

Mass of the meter rule is always at the center of the rule ( 25 cm mark)Therefore, the mass of the half meter rule is experienced 5 cm from the pivot.But, According to law of moments, clockwise moments is equal to anticlockwise moments when a system is at a state of balance.

Therefore;

Assuming the mass of half meter rule is m

Then;

m × 5 cm = 50 g × 15 cm

m = 150 g

Therefore;

Mass of the  half meter rule is 150 g

 

The mass of the half meter ruler is 150g

what percentage of the earth's surface is covered in water

Answers

Answer:

71 % of the earth's surface is covered in water

Answer:

71%

Explanation:

Which of the following is the best thermal insulator?

A.) Air
B.) Water
C.) Metal
D.) Stone

Please help I’m torn between A and B. I’ve asked many and people say A, but I asked my science teacher and she said B. And also I’ve researched and on answers.com also says Water is the better insulator..but idk I’m conflicted! APEX

Answers

Answer:

It's actually air

Explanation:

The best thermal insulator will be A) Air

What is thermal insulator  ?

Thermal insulator is the process of insulating against transmission of heat .

Air is the best thermal insulator if the distance between the molecule is greater because air has gaseous  state , it is even harder for the heat to transfer through the material . Air is good insulator   because its spread out molecular structure resists heat transfer .

correct option is a) Air

learn more about thermal insulator :

https://brainly.com/question/837701?referrer=searchResults

#SPJ3

why don't we use more renewable energy sources​

Answers

Answer:

Renewable energy sources 1.Cost more then nonrenewable resources and 2.Are so far not as reliable as nonrenewable energy.

Explanation:

renewable energy often has trouble creating the same amount of power that fossil fuels make because of its efficiency , they're expensive too

Think Critically Predict what would happen to the volume of a gas
if the pressure on that gas were doubled and then the absolute
temperature of the gas were doubled.

Answers

The volume of the gas does not change

Explanation:

To solve this problem, we can apply the ideal gas equation, which states that:

[tex]\frac{pV}{T}=const.[/tex]

where

p is the pressure of the gas

V is its volume

T is its absolute temperature

The equation can also be written as

[tex]\frac{p_1 V_1}{T_1}=\frac{p_2 V_2}{T_2}[/tex]

where in this problem we have:

[tex]p_1[/tex] is the initial pressure of the gas

[tex]V_1[/tex] is the initial volume

[tex]T_1[/tex] is the initial temperature

[tex]p_2 = 2 p_1[/tex] is the final pressure (twice the initial pressure)

[tex]V_2[/tex] is the final volume

[tex]T_2 = 2T_1[/tex] is the final temperature (twice the initial temperature)

Solving for V2, we find what happens to the volume of the gas:

[tex]V_2 = \frac{p_1 V_1 T_2}{p_2 T_1}=\frac{p_1 V_1 (2T_1)}{(2p_1) T_1}=V_1[/tex]

Therefore, the volume of the gas does not change.

Learn more about ideal gases:

brainly.com/question/9321544

brainly.com/question/7316997

brainly.com/question/3658563

#LearnwithBrainly

How much heat is lost when 10 g of Glass cools 15 Celsius

Answers

The heat lost by the glass is 126 J

Explanation:

The amount of heat lost by a substance is proportional to the change in temperature of the substance according to the following equation:

[tex]Q=mC_s \Delta T[/tex]

where

Q is the amount of heat lost

m is the mass of the substance

[tex]C_s[/tex] is the specific heat capacity of the substance

[tex]\Delta T[/tex] is the change in temperature

In this problem, we have:

m = 10.0 g is the mass of the glass

[tex]\Delta T = -15^{\circ}C[/tex] is the change in temperature of the glass

[tex]C_s = 0.840 J/g{\circ}C[/tex] is the specific heat capacity of glass

Substituting and solving for Q, we find

[tex]Q=(10)(0.840)(-15)=-126 J[/tex]

So, the heat lost by the glass is 126 J.

Learn more about specific heat capacity:

brainly.com/question/3032746

brainly.com/question/4759369

#LearnwithBrainly

The heat loss for 10 g cooling by 15 °C can be calculated; the result would be -126 J.

To find out how much heat is lost when 10 g of glass cools by 15 °C, one would need to know the specific heat capacity of glass and use the formula: Q = mcΔT, where 'Q' is the quantity of heat, 'm' is the mass, 'c' is the specific heat capacity, and 'ΔT' is the change in temperature. Unfortunately, the specific heat capacity of glass is not provided in the question or the examples, which is necessary to calculate the exact amount of heat lost. However, for illustration, if we assume a typical value for glass is approximately 0.84 J/g°C, the calculation for the heat lost would be: Q = 10 g × 0.84 J/g°C × (-15 °C) = -126 J (negative sign indicating loss).

if 2.0 J of work is done in raising a 180 g apple, how far is it lifted

Answers

Answer:

1.14 meters

Explanation:

You have already learned that work and energy have same units i.e. Joule (J).

If the object has travelled some distance (upwards) then there must be some potential difference (increased potential energy).

Thus the energy needed to lift the ball can be found by this formula:

E

p

=  

m

g

h

Where  

E

p

means potential energy needed (or simply work done). m stands for mass, g for gravitational energy, and h for the height reached.

Now we know the energy(2 J), the mass (0.18 kg), and gravitational energy (9.8 m/s^2). Putting into the formula we get:

2

=

0.18

9.8

h

2

0.18

9.8

=

h

2

1.76

=

h

1.14

=

h

Finally,

height reached above the ground = 1.14 m


When a cup is placed on a table, which force prevents the cup from falling to the ground?

Answers

Answer:Answer: Normal force prevents the cup from falling to the ground. Explanation : When a cup is placed on a table, the forces acting on the cup are the gravitational force and the normal force. The gravitational force acts in the downward direction while the normal force acts in an upward direction

Explanation:

a cheetah ran 100 meters in 6 seconds. what is its average speed?

Answers

Answer:

A=16.6 repeating

explanation:

take 100/6 and solve just make sure your equation is set up correctly!

and you should get an answer of 16.6 repeating or 166 m/hour or 16.6 meters/per/hour

If a cheetah ran 100 meters in 6 seconds, then the average speed of the cheetah would be 16.67 meters per second.

What is speed?

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.

As given in the problem a cheetah ran 100 meters in 6 seconds , then we have to find the average speed of the cheetah,

The distance traveled by the cheetah = 100 meters

The time is taken by the Cheetah to cover the distance = 6 seconds

The average speed of the cheetah = 100 / 6

                                                          = 16.67 meters per second

Thus, If a cheetah ran 100 meters in 6 seconds, then the average speed of the cheetah would be 16.67 meters per second.

To learn more about speed here , refer to the link given below ;

brainly.com/question/7359669

#SPJ2

two objects were lifted by a machine. One object had a mass of 2 kilograms, was lifted at a speed of 2m/sec . The other had a mass of 4 kilograms and was lifted at 3m/sec. Which object had more kinetic energy while it was being lifted? Show all calculations

Answers

Object 2 has more kinetic energy

Explanation:

The kinetic energy of an object is the energy possessed by the object due to its motion, and it is given by

[tex]K=\frac{1}{2}mv^2[/tex]

where

m is the mass of the object

v is its speed

In this problem, for object 1:

m = 2 kg

v = 2 m/s

So its kinetic energy is

[tex]K_1 = \frac{1}{2}(2)(2)^2=4 J[/tex]

For object 2,

m = 4 kg

v = 3 m/s

So its kinetic energy is

[tex]K_2 = \frac{1}{2}(4)(3)^2=18 J[/tex]

Therefore, object 2 has more kinetic energy.

Learn more about kinetic energy:

brainly.com/question/6536722

#LearnwithBrainly

why is "Galloping Gertie" an appropriate nickname for the bridge​

Answers

Answer:

"Galloping Gertie" is an appropriate nickname for the bridge​ Tacoma Narrows.

Explanation:

The Tacoma Narrows Bridge is slender, elegent and graceful bridge is stretched like a steel ribbon across Puget Sound in 1940.

When Galloping Gertie splashed into Puget Sound, it created ripple effects across the nation and around the world. The event changed forever how engineers design suspension bridges.

Tacoma Narrows Bridge The original bridge received its nickname "Galloping Gertie" because of the vertical movement of the deck observed by construction workers during windy conditions.

Final answer:

The nickname 'Galloping Gertie' is appropriate for the bridge because it refers to the Tacoma Narrows Bridge, which famously collapsed due to strong winds.

Explanation:

The nickname 'Galloping Gertie' is appropriate for the bridge because it refers to the Tacoma Narrows Bridge, which famously collapsed due to strong winds. When the bridge experienced wind-induced vibrations, it appeared to be galloping like a horse, hence the nickname. The collapse of Galloping Gertie serves as an important lesson in engineering and the need for understanding the effects of forces on structures.

A motorcycle begins at rest and accelerates uniformly S7.9 we want to find a time to take the motorcycle to reach a speed of 100 which chimeric formula would be most useful to solve for the target unknown

Answers

The motorbike reaches 100 km/h in 3.5 seconds

Explanation:

The motion of the motorbike is a uniformly accelerated motion (= constant acceleration), therefore we can use the following suvat equation:

[tex]v=u+at[/tex]

where

v is the final velocity

u is the initial velocity

a is the acceleration

t is the time

For the motorbike in this problem,

u = 0 (it starts from rest)

[tex]v = 100 km/h = 27.8 m/s[/tex] is the final velocity

[tex]a=7.9 m/s^2[/tex] is the acceleration

Solving for t, we find the time it takes for the bike to reach that velocity:

[tex]t=\frac{v-u}{a}=\frac{27.8-0}{7.9}=3.5 s[/tex]

Learn more about accelerated motion:

brainly.com/question/9527152

brainly.com/question/11181826

brainly.com/question/2506873

brainly.com/question/2562700

#LearnwithBrainly

Starting from rest, a 75.0-kg snowboarder slides straight down a 115-m slope in 6.6 s. If the slope is a 35°
incline, find the following:
(a) The acceleration of the snowboarder.

Answers

The acceleration of the snowboarder is [tex]5.6 m/s^2[/tex] down along the incline

Explanation:

To find the acceleration of the snowboard, we have to analyze the forces acting along the direction parallel to the incline.

There is only one force acting in this direction, and it is the component of the weight parallel to the incline, given by

[tex]mg sin \theta[/tex]

where

m = 75.0 kg is the mass of the man

[tex]g=9.8 m/s^2[/tex] is the acceleration of gravity

[tex]\theta=35^{\circ}[/tex] is the angle of the incline

Substituting, we find that the net force along the incline is:

[tex]F=(75.0)(9.8)(sin 35^{\circ})=421.6 N[/tex]

According to Newton's second law, the net force on the snowboard is equal to the product between his mass and his acceleration:

[tex]F=ma[/tex]

where a is the acceleration. Therefore, solving for a, we find

[tex]a=\frac{F}{m}=\frac{421.6}{75}=5.6 m/s^2[/tex]

And the direction of this acceleration is down along the incline.

Learn more about acceleration and Newton's second law:

brainly.com/question/11411375

brainly.com/question/1971321

brainly.com/question/2286502

brainly.com/question/2562700

#LearnwithBrainly

To a cyclist riding due west with a speed of 4 m/s a wind appears to
blow from south west. The wind appears to blow from south to a man running at 2 m/s in the same direction. What is the actual velocity of the wind ?​

Answers

Final answer:

The actual velocity of the wind is 2 m/s due west.

Explanation:

To find the actual velocity of the wind, we need to consider the velocities of both the cyclist and the man running.

Let's assume the cyclist's velocity is Vc = 4 m/s due west.

The man's velocity is Vm = 2 m/s due west.

Since the wind appears to blow from the south to the man running, the wind's velocity is equal to the difference between the velocities of the cyclist and the man running.

Therefore, the actual velocity of the wind is Vw = Vc - Vm = 4 m/s - 2 m/s = 2 m/s due west.

3. The angular dispersion of a prism depends on
A. the index of refraction only B. the angle of
incidence as well as the index of refraction C. the
angle of incidence only D. the hi thickness of the
prism E, the prism angie.​

Answers

Answer:

The angular dispersion of a prism depends on the index of refraction only.

Explanation:

The angular dispersion of a prism mainly depends upon the refractive index of a material. And this refractive index is dependent on the wavelength of light. Each colour possesses its own characteristic and the wavelength is also different. There has been a relation between refractive index of a material and wavelength of light  higher the wavelength of the colour, greater would be the dispersion of light. As like when we passes light from a prism, according to this principle, the colours are dispersed.  

All the other options are incorrect as cannot decide angle of dispersion.

From the choices below, choose all that are correct.

I. Sound traveling faster through the air in the Sahara desert than in Antarctica.

II. An astronaut hearing the loud explosion of a ship from a mile away in space.

III. Speeds and frequencies of sounds change as they pass through different mediums.
A) I
B) I and II
C) I and III
D) II and III

Answers

The correct choice is

A) I. Sound traveling faster through the air in the Sahara desert than in Antarctica.

Explanation:

Sound is a mechanical wave, which is a periodic disturbance of the space that propagates through vibrations of the particles in the medium filling the space. In particular, sound waves are longitudinal waves, in which the direction of oscillation of the particles in the medium is parallel to the direction of propagation of the wave.

Let's analyze now each statement:

I. Sound traveling faster through the air in the Sahara desert than in Antarctica.  --> TRUE. In fact, the higher the temperature of the air, the faster the sound propagates. In particular, there is a linear relationship between speed of sound and temperature of the air:

[tex]v=331.3 + 0.6T(^{\circ}C)[/tex]

where [tex]T(^{\circ}C)[/tex] is the temperature of the air in Celsius degrees.

II. An astronaut hearing the loud explosion of a ship from a mile away in space.  --> FALSE. This is not possible: in fact, sound is a mechanical wave, so it propagates only through a medium, and it cannot propagate in a vacuum (space is essentially vacuum, so sound cannot propagate in space).

III. Speeds and frequencies of sounds change as they pass through different mediums. --> FALSE. When a wave passes through different mediums, only the speed and the wavelength of the wave change, while the frequency remains the same.

Learn more about waves:

brainly.com/question/5354733

brainly.com/question/9077368

#LearnwithBrainly

Answer:     I. Sound traveling faster through the air in the Sahara desert than in Antarctica.

Explanation:

Frequency stays the same as sound passes through different mediums. An explosion in space is not going to be heard if you are in the vacuum of space yourself.

A group of researchers is studying the effects of stress on decision making. They provide a group of candidates with questionnaire to fill
out and place them in mildly stressful situations. The following table shows the time taken to complete the questionnaire what is the
mean and median of the sample data?
subject 1 120 seconds
subject 2 139 seconds
subject 3 103 seconds
subject 4 100 seconds
subject 5 112 seconds
The median of the samples
The mean of the sample set is. ____________. The median of the sample set is ____________.

Answers

Answer:

Mean: 114.8

Median: 112

Explanation:

The mean is the average of the numbers so you add them all together and divide by the number of terms. The median is the middle value when the terms are in order from least to greatest.

Answer:

Mean of the sample set = 114.8  

Median of the sample set = 112

Explanation:

To calculate mean, add value of all samples and then divide with number of samples.

Mean of the sample set = (100+103+112+120+139)/5 = 114.8

To calculated median, arrange the values in ascending order then take the value which is at middle.

100, 103, 112, 120, 139

“112” is at the middle so,

Median of the sample set = 112  

Un cuerpo se mueve a la derecha sobre una superficie horizontal áspera a una velocidad constante bajo la acción de una fuerza horizontal de 15 N. Determine:

a) Modulo y dirección de la fuerza de roce

Answers

Answer:

Fuerza de roce = 15 N

Hacia la izquierda

Explanation:

Las leyes de Newton explican el comportamiento de cuerpos bajo efectos de fuerzas externas. La primera ley especifica que un cuerpo no cambiará su estado de movimiento mientras una fuerza desequilibrante no lo acelere. Es decir, un cuerpo que se mueve a velocidad constante, tiene cero fuerza desequilibrante.

Como el cuerpo se está moviendo a velocidad constante, no hay aceleración y por lo tanto la fuerza total es cero.

Dado que estamos aplicando una fuerza horizontal de 15N y aún así el cuerpo se mueve a velocidad constante, significa que esa fuerza está siendo contrarrestada por la fuerza de roce hasta producir un equilibro de fuerzas y por lo tanto, cero fuerza desequilibrante.

La fuerza de roce es entonces, en módulo igual a la fuerza aplicada, es decir, 15 N

Su dirección siempre es opuesta al movimiento, así que la fuerza de roce se dirige hacia la izquierda

a 2-kg bowling ball is 2.5 meters off the ground on a post when it falls. Just before it reaches the ground, it is traveling 7 m/s. Assuming tht there is no air resistance, which statement is true? 1. the initial potential energy is greater than the final kinetic energy 2. the mechanical energy is conserved 3. the mechanical energy is not conserved 4. the initial potential energy is less than the final kinetic energy

Answers

The mechanical energy is conserved" in the given system is true out of all given options.

Answer: Option 2

Explanation:

According to law of conservation of energy, the energy will neither be created nor be destroyed, irrespective of the type of energy. As in the present case, the ball is bowled and it is travelling to ground, so the mechanical energy is working in this case. Thus the mechanical energy will be conserved. Even it can be shown as follows.

As the 2 kg ball is travelling with a speed of 7 m/s, the kinetic energy exhibited by the ball while falling to ground will be

           [tex]\text {Kinetic energy}=\frac{1}{2} \times \text { mass of the ball } \times\left(\text { speed of the ball) }^{2}\right.[/tex]

Thus, applying given values, we get,

           [tex]\text {Kinetic energy exhibited by the ball}=\frac{1}{2} \times 2 \times 7 \times 7=49 \mathrm{J}[/tex]

Similarly, as the ball is 2.5 m above ground, the potential energy will also be exhibited by the ball at that position. So the potential energy will be

           [tex]\text {Potential energy}=\text {Mass} \times \text {acceleration} \times \text {height}[/tex]

Thus,

           [tex]\text { Potential energy exhibited by the ball }=2 \times 9.8 \times 2.5=49 \mathrm{J}[/tex]

Thus as the magnitude of kinetic energy is equal to the magnitude of potential energy exhibited by the ball with varying direction, the net energy will be zero. This is because the kinetic energy will be acting in opposite direction to the potential energy exhibited by the ball. Hence as the net energy is zero, the mechanical energy is conserved.

3-) A farm truck moves due east with a constant velocity of 9.50 m/s on a limitless, horizontal stretch of
road. A boy riding on the back of the truck throws a can of soda upward (Fig. P4.54) and catches the
projectile at the same location on the truck bed, but 16.0 m farther down the road.

(a) in the frame of reference of the truck, at what angle does the boy throw the can? .
(b) What is the initial speed of the can relative to the truck?

Answers

given,

constant velocity = 9.50 m/s

acceleration = 0

distance = 16 m

the time of flight

 s = so + ut + 1/2at²

16 = 9.50 × t

t = 1.68 s

a) to catch the can the truck he must throw it  straight up, at 0° to the vertical.

b) now,

yf = Yi + UyT + 1/2at²

0 = 0 + Uy * 1.68 - 1/2 * 9.8 * 1.68²

Uy = 8.23 m/s

I am driving 65 mph when I suddenly come to a stop. my acceleration was -9.2 m/s squared. how long did it take me to stop?
hint: convert mph to m/s first

Answers

The car takes 3.15 s to stop

Explanation:

The motion of the car is a uniformly accelerated motion (=constant acceleration), therefore we can use the following suvat equation:

[tex]v=u+at[/tex]

where

v is the  final velocity

u is the initial velocity

a is the acceleration

t is the time

Keeping in mind that

1 mile = 1609 metres

1 hour = 3600 seconds

Here we have:

[tex]u = 65 mph \cdot \frac{1609 m/mile}{3600 s/hour}=29.0 m/s[/tex] is the initial velocity, converted into m/s

v = 0 is the final velocity (the car comes to a stop)

[tex]a=-9.2 m/s^2[/tex] is the acceleration

And solving the equation for t, we find

[tex]t=\frac{v-u}{a}=\frac{0-29.0}{-9.2}=3.15 s[/tex]

Learn more about accelerated motion:

brainly.com/question/9527152

brainly.com/question/11181826

brainly.com/question/2506873

brainly.com/question/2562700

#LearnwithBrainly

Different measurements are expressed in different units. Choose the correct SI units for the following types of
measurement
The SI units for measuring the velocity of the car:
The SI units for measuring the acceleration of the car:
The SI units for measuring force:
The SI units for measuring mass:

Answers

Answer: I don't know why people just cant give a straight answer.

Meters per second

Meters per second Squared

Newtons

Kilograms

100% right keep it going.

Explanation:

The S.I. units for measuring the velocity, acceleration, force, and mass are meter per second (m/s), meter per second squared (m/s²), Newton (N), and Kilogram (Kg) respectively.

What is the International System of Units?

The International System of Units or S.I. units can be described as the modern version of the metric system and the world's most globally used system of measurement which is established and controlled by the Conference on Weights and Measures.

S.I. units system can be described as a system of measurement used in every country in the world employed in technology, industry, science, and commerce.

The S.I. exhibits a coherent system of units starting with seven base units. The second  (s, the unit of time), Kilogram (kg, unit of mass), meter (m, length), kelvin (K, unit of temperature), mole (mol, amount of substance), ampere (A, unit of electric current), and candela (cd, luminous intensity).

Velocity is the ratio of distance and time so it has an S.I. unit of meter per second. Acceleration is the ratio of velocity and time so it has an S.I. unit of meter per second squared.

Learn more about S.I. units, here:

brainly.com/question/12750330

#SPJ6

If you could only see the lights in the circuit and the wires were covered from view, how could you determine the type of circuit the lights are arranged in?

Answers

To determine the type of circuit by only viewing the lights, one can observe the behavior when a light is manipulated; all lights going out suggests a series circuit, while others staying lit indicates a parallel circuit. Brightness changes with the addition or removal of lights also help identify the circuit type.

If you could only see the lights in a circuit and the wires were concealed, determining if the lights are arranged in a series or parallel circuit could be inferred by observing the behavior of the lights when one is manipulated. For example, if one light goes out and the others remain lit, it suggests a parallel circuit, as each light has its own path to the power source. However, if one light goes out and the rest do as well, this indicates a series circuit, where all lights are in a single path and the current must flow through each light consecutively.

Another method to determine the circuit type is by observing brightness changes when more lights are added or removed. In a series circuit, adding more lights would generally cause all lights to dim since the same current flows through each component and the total resistance increases. In contrast, in a parallel circuit, adding or removing lights would not change the brightness of the other lights, as each has an independent connection to the power source and their voltages remain constant.

Mr.G I running down the street trying to catch the bus. He is one city block away (200m) and this bus is leaving in 10s.

a) How fast does Mr.G need to run to catch the bus on time? (Hint: what do you know about the problem)

b) If the fastest human can run 12 m/s, will Mr.G be able to catch the bus? Explain your answer

Answers

Answer:

a) 20 m/s

b) No

Explanation:

a)

Mr. G needs to run x= 200 m in t = 10 seconds to catch the bus.

Knowing the speed is computed as

[tex]\displaystyle v=\frac{x}{t}[/tex]

We have

[tex]\displaystyle v=\frac{200m}{10s}=20m/s[/tex]

b)

The fastest human can run 12 m/s, so Mr. G won't be able to catch the bus because he needs to run faster than that

Final answer:

Mr.G needs to run at 20 meters per second to catch the bus, but since the fastest human can run only at 12 meters per second, it is impossible for Mr.G to catch the bus on time.

Explanation:

To solve for how fast Mr.G needs to run to catch the bus on time, we need to find his required speed. Speed is calculated by dividing the distance by the time. Since Mr.G is 200 meters away from the bus and he has 10 seconds to reach it, his required speed is 20 meters per second (200m / 10s = 20m/s).

Regarding whether Mr.G can catch the bus, considering the fastest human can run at a speed of 12 meters per second, it is unfortunately impossible for Mr.G to catch the bus. The required speed to catch the bus is 20m/s, which exceeds the maximum human running speed.

How is a gas affected when pressure, temperature, or volume
change?

Answers

Explanation:

I never really took physics yet, but I do have some general knowledge of particle physics.

When pressure increases, the gas molecules will get closer together and rise in temperature, vice versa. (That's actually one way we get energy. The more pressure we apply to gas, the hotter it gets and therefore releases pretty good amounts of energy)

When temperature increases, the gas molecules will try to get away from each other and spread out, vice versa. The higher the temperature, the faster the particles move

And when volume increase, there is more room for the gas particles to bounce around and they are generally spread out from each other.

Someone else can answer if I didn't explain it correctly

Answer:

The volume of a given gas sample is directly proportional to its absolute temperature at constant pressure (Charles's law). The volume of a given amount of gas is inversely proportional to its pressure when temperature is held constant (Boyle's law).

Explanation:

A 2.0 kg block is pushed 1.0 m at a constant
velocity up a vertical wall by a constant force
applied at an angle of 27.0
◦ with the horizontal, as shown in the figure.
The acceleration of gravity is 9.81 m/s
2.
If the coefficient of kinetic friction between
the block and the wall is 0.40, find
a) the work done by the force on the block.
Answer in units of J.

b) the work done by gravity on the block.
Answer in units of J.

c) the magnitude of the normal force between
the block and the wall.
Answer in units of N.

Answers

1) Work done by the force: 8.3 J

2) Work done by gravity: -19.6 J

3) Normal force: 16.3 N

Explanation:

1)

The work done by a force pushing an object is given by

[tex]W=Fd cos \alpha[/tex]

where

F is the magnitude of the force

d is the displacement of the object

[tex]\alpha[/tex] is the angle between the direction of the force and of the displacement

First of all, we need to find the magnitude of the force F. Since the block is moving vertically at constant velocity (= zero acceleration), the equation of motion of the block along the vertical direction is:

[tex]F sin \theta - \mu N - mg = 0[/tex] (1)

Where

[tex]\theta=27.0^{\circ}[/tex]

[tex]\mu N[/tex] is the force of friction, where

[tex]\mu=0.40[/tex] is the coefficient of friction

N is the normal reaction of the wall

(mg) is the weight of the block, where

m =2.0 kg is the mass of the block

[tex]g=9.81 m/s^2[/tex] is the acceleration of gravity

Along the horizontal direction, the equation of motion is:

[tex]F cos \theta = N[/tex] (2)

Substituting (2) into (1),

[tex]F sin \theta - \mu F cos \theta - mg =0[/tex]

And solving for F,

[tex]F(sin \theta - \mu cos \theta) = mg\\F=\frac{mg}{sin \theta - \mu cos \theta}=\frac{(2.0)(9.81)}{sin 27^{\circ} - 0.40 cos 27^{\circ}}=18.3 N[/tex]

Now we can calculate the work done by the force. Here we have

d = 1.0 m is the displacement

[tex]\alpha = 90^{\circ} - 27^{\circ} = 63^{\circ}[/tex] is the angle between the direction of the force and the displacement

Substituting,

[tex]W=(18.3)(1.0)(cos 63^{\circ})=8.3 J[/tex]

2)

The work done by gravity is equal to:

[tex]W_g = mg d cos \alpha[/tex]

where

m = 2.0 kg is the mass of the block

[tex]g=9.81 m/s^2[/tex]

d = 1.0 m is the displacement

[tex]\alpha=180^{\circ}[/tex], since the direction of gravity is downward while the displacement of the block is upward

Substituting,

[tex]W=(2.0)(9.81)(1.0)(cos 180^{\circ})=-19.6 J[/tex]

3)

Equation (2) found in part 1) tells that

[tex]N=F cos \theta[/tex]

which means that the normal force between the wall and the block is equal to the horizontal component of the pushing force on the block.

Here we have:

F = 18.3 N is the magnitude of the pushing force

[tex]\theta=27.0^{\circ}[/tex] is the angle of the force with the horizontal

Substituting, we find the normal force:

[tex]N=(18.3)(cos 27^{\circ})=16.3 N[/tex]

Learn more about forces and acceleration:

brainly.com/question/11411375

brainly.com/question/1971321

brainly.com/question/2286502

brainly.com/question/2562700

#LearnwithBrainly

Final answer:

The work done by the force on the block is 22.3 J. The work done by gravity is 19.6 J and the normal force between the block and the wall is 18.1 N.

Explanation:

Firstly, we need to calculate the force that is applied (Force Applied) by taking the cosine of the angle (27.0◦) which is the force applied horizontally. Using the formula F_applied = m*g/cos(θ), where m=2.0 kg and g=9.81 m/s^2, we find that Force Applied = 22.3 N.

Next, the work done by the force on the block (Work Done) can be calculated by multiplying the Force Applied by the distance it moved (Force Applied x distance). Here, Work Done = 22.3 N x 1.0 m = 22.3 J.

The work done by gravity is obtained by multiplying the weight of the block by the distance it moves vertically (Work Done by Gravity). Here, Work done by Gravity = m*g*d = 2.0 kg * 9.81 m/s^2 * 1.0m = 19.6 J.

Finally, we calculate the magnitude of the normal force by multiplying the weight of the block by the cosine of the angle (m*g*cos(θ)) which equals to Normal Force = 2.0 kg * 9.81 m/s^2 * cos(27.0◦) = 18.1 N.

Learn more about Forces and Work here:

https://brainly.com/question/758238

#SPJ11

Why do physicists say mass is more fundamental than weight??

Answers

Answer:

because mass of a matter never changes

on the other hand the weight of a matter changes due to gravity

for example the

on the moon the pull of gravity is less than it is on earth so the Weight of an object will be less on the moon but the mass of it will stay the same

Explanation:

I

Mass is more fundamental than weight because mass is a consistent measure of the quantity of matter, whereas weight is the gravity-dependent force acting on an object and can vary. The confusion between these terms occurs often in everyday language, especially since they are used interchangeably.

Physicists say that mass is more fundamental than weight because mass is an intrinsic property of an object that represents the quantity of matter, which does not vary in classical physics. Conversely, weight is the gravitational force acting on an object, which can vary depending on the location and gravity. Therefore, mass is a more consistent and universal characteristic of matter than weight, which can differ even on Earth depending on elevation or geographic location.

The confusion between mass and weight arises as the terms are used interchangeably in everyday language. For instance, our medical records may show our weight in kilograms, which is actually a unit of mass, instead of the correct unit of newtons, which is used to measure gravitational force. This interchangeability of terms has led to a common misunderstanding of these distinct physical quantities.

The relationship between mass and weight becomes particularly evident in space.

what is resistance? Difference between resistance and resistivity.

Answers

Answer:

Resistance is the opposition that a substance offers to the flow of electric current

Explanation:

resistance is the opposition and Resistivity is a measure of the resistance of a given size of a specific material to electrical conduction.

Final answer:

Resistance is the opposition to electric current flow in materials, measured in ohms, while resistivity is a fundamental property of the material itself, indicating how much it resists electric current flow.

Explanation:

Understanding Resistance and Resistivity in Physics

Resistance is a measure of the difficulty in passing an electric current through a wire or component. It has units of ohms and is calculated by the formula V = IR, where V is voltage, I is current, and R is resistance. Resistivity, represented by the symbol p, is a material property that quantifies how strongly a material opposes the flow of electric current. The resistance R of a cylindrical object like a wire can be calculated using the formula R = pL/A, where L is the length and A is the cross-sectional area.

The key difference between resistance and resistivity is that resistivity is an intrinsic property of a material, which means it does not change regardless of the shape or size of the material. In contrast, resistance is an extrinsic property that depends on both the material's resistivity and the physical dimensions of the object. Materials can generally be categorized into conductors, semiconductors, and insulators, based on their resistivity values.

An airplane changes its velocity uniformly from 150 m/s to 60 m/s in 15 s. Calculate:
a. Its acceleration
b. The distance traveled in that time

Answers

Answer:2.5

Explanation:

Other Questions
MathScience Social studies The diffusion constant for oxygen diffusing through tissue is 1.0 10-11 m2/s. In a certain sample oxygen flows through the tissue at 2.0 10-6 kg/s. If the thickness of the tissue is doubled, then what is the rate of oxygen flow through the tissue? Single-celled Paramecium live in pond water (a hypotonic environment relative to the cytosol). They have a structural feature, a contractile vacuole, which enables them to osmoregulate. If sucrose or saline was added to the pond water in different concentrations (in millimolars, mM), under which conditions would you expect the contractile vacuole to be most active? The pharmacology instructor is discussing the differences among the various diuretic agents. Which would the instructor cite as a difference between spironolactone and hydrochlorothiazide?a. potassium losses are greater with spironolactone than with hydrochlorothiazide.b. Potassium losses are greater with hydrochlorothiazide than with spironolactone.c. Spironolactone is more likely to be taken with a potassium supplement.d. The two diuretics act in different parts of the nephron In a report to a supervisor, a chemist described an experiment in the following way: "0.0800 mol of H2O2 decomposed into 0.0800 mol of H2O and 0.0400 mol of O2." Express the chemistry and stoichiometry of this reaction by a conventional chemical equation. Do not include physical states. Use the smallest possible whole number coefficients. An inorganic mineral is not composed of anything that was once _____.A.oxidizedB.aliveC.usedD.crystallizedE.reduced what is the answer because am stuck what do the similarities between the skeletal structures of these three species most likely indicate about their evolutionary history A 14 pound bag of dog food cost $16.24 and a 30 pound bag of dog food cost $33.30 which statement is true and can be used to determine the better buy?A.The unit rate per pound of a 14 pound bag $0.05 less than the unit rate of a 30 pound bag.B.The unit rate per pound of a 14 pound bag is $0.05 more than the unit rate of a 30 pound bag.C.The unit rate per pound of a 14 pound bag is $0.50 less than the unit rate of a 30 pound bag.D.The unit rate per pound of a 14 pound bag is $0.50 more than the unit rate of a 30 pound bag. Consider the following electron configurations to answer the question:(i) 1s2 2s2 2p6 3s1(ii) 1s2 2s2 2p6 3s2(iii) 1s2 2s2 2p6 3s2 3p1(iv) 1s2 2s2 2p6 3s2 3p4(v) 1s2 2s2 2p6 3s2 3p5The electron configuration of the atom that is expected to have a positive electron affinity is ________. 7.66 0.55 i need 20 charters to ask this Discrete MathA coin is flipped four times. For each of the events described below, express the event as a set in roster notation. Each outcome is written as a string of length 4 from {H, T}, such as HHTH. Assuming the coin is a fair coin, give the probability of each event.( a ) The first and last flips come up heads.( b ) There are at least two consecutive flips that come up heads.( c) There are at least two consecutive flips that are the same The rate of reaction for a hypothetical reaction was found to be 0.62 mol/L*s at 6C. What would be the rate at 46C? Cystic fibrosis affects the lungs, the pancreas, the digestive system, and other organs, resulting in symptoms ranging from breathing difficulties to recurrent infections. Which of the following terms best describes this expression of phenotypes a, incomplete dominance b.codominance c multiple alleles d epistasis e pleiotropy Kathy's parents use alcohol quite a bit. After they get home from work, they drink steadily all evening and, although she has never seen her parents drunk, they don't spend much time interacting with each other or the children. According to research, Kathy is at risk forA) Drinking heavily herselfB) DepressionC) Social isolationD) Becoming angry with her peers who drink Listed below are certain costs or discounts incurred in the purchase or construction of new plant assets.1. Indicate whether the costs should be expensed or capitalized.2. For costs that should be included in plant assets, indicate in which category of plant assets (Equipment, Building, or Land) the related costs should be recorded on the balance sheet.1. Charges incured to train employees to use new equipment.2. Invoice cost to purchase new equipment3. Deduction for an earl payment discount taken on the puchase of new equipment.4. Real estate commissions incurred on land purchased for a new plant.5. Property taxes on land incurred after it was purchased6. Costs of tune-up for the truck used to deliver new equipment7. Costs to lay foundation for a new building8. Insurance on a new building during the construction phase. Then as to the females, it would, I think, with humble submission, be a loss to the publick, because they soon would become breeders themselves: And besides, it is not improbable that some scrupulous people might be apt to censure such a practice, (although indeed very unjustly) as a little bordering upon cruelty, which, I confess, hath always been with me the strongest objection against any project, how well soever intended.Which statement is an example of understatement in this excerpt?a. The criticism of the practice would be levied "very unjustly."b. Women becoming breeders would be a "loss to the publick."c. Some people "might be apt to" criticize the practice.d. Many women would "become breeders themselves." Jimmy measured four pieces of wood. their measures are 4.2 ft, 9/2 ft, 4.02 ft, and 4 2/9 ft. what's the length of the shortest piece At present, Israel has the two-state solution suggested by the United Nations in 1947. Today, the Palestinian Liberation Organizationthe sole voice of the Palestinian people. The Palestinians have most recently approached in attempt to have their grievances addressed. True or False. You can rent time on computers at the local copy center for a a $ 7 setup charge and an additional $ 3.50 for every 10 minutes. How much time can be rented for $ 22?