The diprotic acid h2co3 can produce two buffers depending on the ph of the solution. identify the conjugate acid/base pair from carbonic acid that would form the most basic buffer.
How many molecules are in 2.10 mol CO ?
A.) 2.53 x 10^24
B.) 3.49 x 10^-24
C.) 3.79 x 10^24
D.) 1.26 x 10^24
The number of molecules present in 2.10 moles of CO₂ is 1.264×10²⁴ molecules. Therefore, option D is correct.
What do you mean by mole ?The mole is the amount of substance in a system that contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12; its symbol is "mol".
In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object.
From Avogadro's hypothesis as follows;
1 mole of any substance = 6.023×10²³ molecules.
This implies that:
1 mole of CO₂ = 6.023×10²³ molecules
With the above information, we can obtain the number of molecules in 2.10 moles of CO₂. This can be obtained as given below:
1 mole of CO₂ = 6.023×10²³ molecules
Then,
2.10 moles of CO₂ = 2.10 × 6.02×10²³
2.10 moles of CO₂ = 1.264×10²⁴ molecules
Thus, the number of molecules present in 2.10 moles of CO₂ is 1.264×10²⁴ molecules., option D is correct.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ6
The change of state from a gas to a liquid is called _____.
a. deposition
b. sublimation
c. condensation
d. evaporation
#1: Which of the following is an exothermic reaction?
A. dissolving ammonium nitrate in water to cool the water
B. condensation
C. melting ice
D. dissolving sugar in water
**my answer; C
is that right? @aaronq :)
According to Ptolemy's model of the movement of celestial bodies, A. the sun is the center of the universe. B. the earth rotates around the sun. C. planets orbit in circular paths around the earth. D. the earth rotates around the moon.
Stoichiometry
---
Use the following reaction to determine the number of liters of hydrogen that must react with 20 L of oxygen to form water vapor.
---
Equation:
---
2H2 + O2 -> 2H2O
---
What is the mass of 1.50 mol C5H12
The mass of 1.50 mol of C₅H₁₂ is calculated to be 108.09 g using the molar mass of the compound.
Explanation:The molar mass of a compound is the total mass of all the atoms in the molecule. The compound C₅H₁₂ consists of 5 carbon atoms and 12 hydrogen atoms. Given that the atomic mass of carbon (C) is 12.01 g/mol and the atomic mass of hydrogen (H) is 1.01 g/mol, the molar mass of C₅H₁₂can be calculated as: (5 x 12.01 g/mol) + (12 x 1.01 g/mol) = 72.06 g/mol. Therefore, the mass of 1.50 mol C₅H₁₂ would be (1.50 mol x 72.06 g/mol) = 108.09 g.
Learn more about Molar Mass here:https://brainly.com/question/12127540
#SPJ12
The mass of 1.50 mol of C5H12 (pentane) is 108.2247 grams. First, the molar mass of C5H12 is calculated by summing the atomic masses of carbon and hydrogen, then this molar mass is multiplied by the number of moles given (1.50 mol) to find the mass.
Explanation:To calculate the mass of 1.50 mol of C5H12, we need to first determine its molar mass. The molar mass of a compound is the sum of the masses of all the atoms in one mole of that compound. For C5H12, which is pentane, the molar mass can be calculated as follows:
(5 atoms × 12.011 g/mol for Carbon) + (12 atoms × 1.0079 g/mol for Hydrogen)(5 × 12.011) + (12 × 1.0079) = 60.055 + 12.0948 = 72.1498 g/molNow that we have the molar mass, we can find the mass for 1.50 mol:
1.50 mol × 72.1498 g/mol = 108.2247 gramsThis calculation assumes that the molar mass has been rounded to four significant figures to match the precision of 1.50 mol, thus the mass of 1.50 mol C5H12 is 108.2247 grams with four significant figures.
Learn more about Molar Mass Calculation here:https://brainly.com/question/25879634
#SPJ3
#1: A material has a density of 8.9 g/cm^3. You have six cubic centimeters of the substance. What is the material’s mass in grams?
A. 3.0 g
b. 5.9 g
C. 27 g
D. 53 g
**Idk i think it is either C. 27 g or D. 53 g :/
1.this substance is a natural non-living material with a uniform structure throughout
A) Mineral
B) Rock
2. Any rock can become a/an (igneous, metamorphic, or sedimentary)_______rock by melting and reforming
3.A sedimentary rock can become a metamorphic rock by exposure to high heat and great__________
(1) The nonliving material with uniform structure has been Mineral. Thus, option A is correct.
(2) The rock formed by the cooling of volcanic eruption and lava has been the igneous rock.
(3) A sedimentary rock can become a metamorphic rock by exposure to high heat and great pressure.
The rock and minerals are the nonliving compositions of the nature that are rich source of many fuels, and natural gases.
The varying form of rocks are present in the nature, and are converted from one form to another.
Rock and Rock cycle(1) Rocks have been defined as the material with nonuniform structure and composition. Rocks are the rich mineral source. They are the uniform structure throughout the material.
Thus, the nonliving material with uniform structure has been Mineral. Thus, option A is correct.
(2) The rock has been converted from one form to another in the rock cycle. The sedimentary rocks are formed by the deposits from the sea. The breakdown of sedimentary rock result in the metamorphic rocks.
The metamorphic rocks are deep inside the crust.
The rock formed by the cooling of volcanic eruption and lava has been the igneous rock.
(3) The sedimentary rocks are converted to the metamorphic rocks by the application of high heat and pressure to the sediments.
Learn more about rock cycle, here:
https://brainly.com/question/15619429
An experiment requires 54.6 g of ethylene glycol, a liquid whose density in SI units is 1114 kg/m3. Rather than weigh the sample on a balance, a chemist chooses to dispense the liquid using a graduated cylinder. What volume in milliliters of the liquid should be used?
Answer:
Volume in milliliters of the liquid should be used is 49 mL.
Explanation:
Mass of the ethylene glycol = 54.6 g = 0.0546 kg
Density = [tex]1114 kg/m^3[/tex]
Volume of ethylene gylcol = V
[tex]Density=\frac{Mass}{Volume}[/tex]
[tex]1114 kg/m^3=\frac{0.0546 kg}{V}[/tex]
[tex]V=\frac{0.0546 kg}{1114 kg/m^3}=4.90\times 10^{-5} m^3[/tex]
[tex]1 m^3=1000 L[/tex]
[tex]4.90\times 10^{-5} m^3=4.90\times 10^{-5}\times 1000=4.90\times 10^{-2} L=49 ml[/tex]
1 L = 1000 mL
Volume in milliliters of the liquid should be used is 49 mL.
what is the name of alcohol that would produce 3-pentanone
Final answer:
The alcohol that would produce 3-pentanone upon oxidation is 3-pentanol, a secondary alcohol that transforms into the ketone when oxidized.
Explanation:
The alcohol that would produce 3-pentanone when oxidized is 3-pentanol. This type of reaction is an oxidation process where the alcohol, specifically a secondary alcohol, is oxidized to a ketone. The oxidation of alcohols depends on the class of the alcohol. In this case, 3-pentanol is a secondary alcohol, which means it has two alkyl groups attached to the carbon bearing the hydroxyl (-OH) group. When this alcohol is oxidized using appropriate oxidizing agents like chromic acid or pyridinium chlorochromate (PCC), it forms the corresponding ketone, which is 3-pentanone.
Why is carbon added to iron to make nails?
The process by which a gas is converted to a liquid is called
solution:
These phase changes can be brought about by heating or cooling. ... This kind of phase change--liquid to gas--is called evaporation or vaporization. Water vapor can in turn be cooled to form liquid water. This kind of phase change--from gas to liquid--is referred to as condensation vaporization.
Condensation is the change of the physical state of matter from gas phase into liquid phase, and is the reverse of vaporization. The word most often refers to the water cycle.
This is required answer
What is the empirical formula of a compound composed of 32.9g of potassium and 6.73 g of oxygen
Jose’ has a circular rug on the floor of his bedroom. If the area of the rug is 16π square feet, what is the diameter of the rug? The diameter of the rug is feet.
Which of the following represents a chemical change. A water to boiled
B Paper is torn
C Glass is shattered
D Wood is burned
to answer your second question, it is D
Which
molecule has the same shape and hybridization as methane
Answer:
cfcl2
Explanation:edg
The partial pressure of carbon dioxide in systemic arterial blood is __________. the partial pressure of carbon dioxide in systemic arterial blood is __________. 100 mm hg 40 mm hg 104 mm hg 45 mm hg
The partial pressure of carbon dioxide (PCO2) in systemic arterial blood is approximately 40 mm Hg.
The partial pressure of a gas in a mixture, like blood, is a measure of the pressure that gas exerts independently, assuming ideal behavior. In the context of blood gases, PCO2 is a crucial parameter reflecting the concentration of dissolved carbon dioxide in the bloodstream.
Normal systemic arterial blood PCO2 levels typically range from 35 to 45 mm Hg. This range is maintained within a very narrow margin as part of the body's acid-base balance, regulated by the respiratory system and the kidneys.
A PCO2 value significantly higher than 45 mm Hg can indicate respiratory acidosis, a condition where the blood becomes too acidic due to excess carbon dioxide. On the other hand, a PCO2 value below 35 mm Hg may indicate respiratory alkalosis, where the blood becomes too alkaline due to insufficient carbon dioxide.
Therefore, a PCO2 of 100 mm Hg, 104 mm Hg, or 45 mm Hg does not represent the typical PCO2 in systemic arterial blood and would suggest an abnormal condition. A PCO2 of 40 mm Hg is within the normal range for systemic arterial blood PCO2.
For more such question on partial pressure visit:
https://brainly.com/question/19813237
#SPJ6
A manganese atom is pictured below.
How many electrons would be free floating and able to form a metallic bond?
1
2
15
24
The correct answer is 2
Which of the following separation methods is used to separate plant pigments?
(Points : 3)
chromatography
simple distillation
fractional distillation
filtration
Answer: chromatography
Explanation:
Chromatography : It is a type of separation process in which the liquid or gas is separated into components at different rate. The principle of chromatography is that the substance of molecule are distributed between the liquid phases. It involves a stationary and a mobile phase. Hence,chromatography is a laboratory technique that is used to separate plant pigments.
Distillation : It is a type of separation process in which the mixture of liquid separated or evaporated at different temperatures.
Fractional distillation is separation of a liquid mixture into fractions which differ in boiling points by means of distillation by use of a fractionating column.
Filtration : It is a type of mechanical separation process in which the solid is separated from the liquid through the filter paper.
A slice of pizza contains 29 g of carbohydrate, 13 g of protein and an unknown amount of fat. if the pizza contains 280 kcal, how many grams of fat are present? report the answer to 2 significant figures.
The grams of fat present is 12 grams.
Based on the given information,
• A slice of pizza contains 13 grams of protein, 29 grams of carbs.
• The total calories present in the pizza is 280 kcal.
Now there is a need to find the grams of fat present in the pizza,
Total calories = 280 kcal
Total calories of carbohydrates = 29 × 4 kcal (1 g of carb contain 4kcal of energy) = 116 kcal.
Total calories of protein = 13 × 4 kcal (1 g of protein contains 4kcal of energy) = 52 kcal.
Calories due to fat = (280 kcal) - (116 kcal + 52 kcal)
= 112 kcal
1 gram of fat contains 9kcal of energy. The amount of fat can be determined as,
Amount of fat = (112/9) g = 12.44 grams or 12 grams of fat.
Thus, the grams of fat present is 12 grams.
To know more about:
https://brainly.com/question/20992726
How is the reaction quotient used to determine whether a system is at equilibrium? a at equilibrium, the reaction quotient is undefined. b the reaction is at equilibrium when q>keq. c the reaction is at equilibrium when q=keq. d the reaction is at equilibrium when q
Enriched weapons-grade uranium consists of 80% uranium-235 (235.044 amu) and 20% uranium-238 (238.051 amu). what is the average atomic mass of weapons-grade uranium, assuming the percentages are exact?
Final answer:
To find the average atomic mass of weapons-grade uranium, calculate the weighted average based on the percentages of each isotope: 80% of 235.044 amu (uranium-235) and 20% of 238.051 amu (uranium-238), yielding an average atomic mass of 235.6454 amu.
Explanation:
To calculate the average atomic mass of weapons-grade uranium, which consists of 80% uranium-235 and 20% uranium-238, you multiply the mass of each isotope by its relative percentage (expressed as a decimal) and then sum the results. The atomic mass unit (amu) for uranium-235 is 235.044 and for uranium-238 is 238.051.
The average atomic mass can be calculated as follows:
(80% of uranium-235) 80/100 × 235.044 amu = 188.0352 amu
(20% of uranium-238) 20/100 × 238.051 amu = 47.6102 amu
Add these values together: 188.0352 amu + 47.6102 amu = 235.6454 amu
Therefore, the average atomic mass of weapons-grade uranium is 235.6454 amu.
A liquid that evaporates at a slow rate exhibits __________.
strong intermolecular forces
weak intermolecular forces
no intermolecular forces
a low volatility
Substances with weaker intermolecular forces evaporate faster due to higher vapor pressure and volatility.
Substances with weaker intermolecular forces evaporate faster than substances with stronger intermolecular forces.
Weak intermolecular forces lead to a higher vapor pressure and increased volatility in substances, causing them to evaporate at a faster rate.
Hi, I can't seem to answer the letter b.--> An empty vial weighs 55.32 g. (a) If the vial weighs 185.56 g when filled with liquid mercury (d 13.53 g/cm3), what is its volume? (b) How much would the vial weigh if it were filled with water (d 0.997 g/cm3 at 25°C)?,
Using the periodic table determine the atomic mass of Na2C2O4
Molecular formulas: You find that 7.36 g of a compound has decomposed to give 6.93 of oxygen. The rest of the compound is hydrogen. If the molar mass of the compound is 34.0, what is its molecular formula?
Ozone, O3(g), is a form of elemental oxygen produced during electrical discharge. Is ΔH∘f for O3(g) necessarily zero? Yes or no question?
Answer: ΔH°f is not zero
Explanation:
the change in enthalpy formation is zero when elements are pure.when they are zero it is mainly because they are most basic,where you cannot form an element with an element.
How mary significant igures are in the messurement 20,500 liters?
6.5 moles AlCl3 reacts with 57.0g of NaOH. how many grams of Al(OH)3 will be produced