12) Which is MOST LIKELY a solid at room temperature?

Answer:

Doppler effect refers to apparent change in frequency/wavelength of the source due to the relative motion between the source and the observer. The frequency increases apparently if the source and observer approach each other and it decreases apparently if the source and the observer move away from each other.

When, apparent frequency increases, it is known as blue-shift and if it decreases, it is known as red-shift.

To accelerate a 12 kg bowling ball at 3 m/s², a force of 36 N is needed. The mass of a truck producing a force of 12,000 N while accelerating at 4 m/s² is 3,000 kg.

The question is asking us to calculate the force required to accelerate a 12 kg bowling ball and to find the mass of a truck given the force it produces and its acceleration. These problems involve using Newton's second law of motion, which states that the force on an object (F) is equal to the mass of the object (M) multiplied by its acceleration (A).

For the bowling ball:

Force (F) = Mass (M) times Acceleration (A)

F = 12 kg times 3 m/s²

F = 36 N (newtons)

For the truck:

Force (F) = Mass (M) times Acceleration (A)

12,000 N = M  imes 4 m/s²

M = 12,000 N / 4 m/s²

M = 3,000 kg

Answer: The answer is C. Food.

The true answer is C.

The boat is attracted to the magnet by the force of magnetism.

Let me explain. If Ashley made the paper boat and place it on the water, gravity will try to pull the boat down, however no magnets are used in this situation.

Now if magnets are used in this situation and the paper clip is attach to the boat, rather than gravity pulling it down, the magnet will be pulling paper clip, causing the boat to move, so instead of gravity, it's magnetism.

Note: Magnets=Magnetism

Answer:

The answer is C

Diffraction is sounds with a larger wavelength to bend around obstacles more easily. Therefore, option A is correct.

Diffraction is the interference or bending of waves via an aperture into the area that is geometrically in the shadow of the obstruction or aperture. Effectively, the wave's secondary source is the diffracting element or aperture.

The bending of waves with a larger wavelength around objects or through apertures with a shorter wavelength results in wave diffraction. If this condition is satisfied, diffraction can occur for both light and sound waves.

Wavelengths of visible light span from 380 to 700 nanometers. Light must pass through an opening that is smaller than 1,000 nanometers for diffraction to take place.

Thus, option A is correct.

To learn more about diffraction, follow the link;

https://brainly.com/question/12290582

#SPJ2

Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles.

Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, the correct answer is option a. Sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles. On the other hand, light waves have very short wavelengths and behave more like rays, so they do not diffract around large obstacles.

The total amount of energy absorbed by a substance as it changes from a solid to a gas at different temperatures can be calculated using the formula Q = m × ΔH. First, calculate the energy required to raise the temperature of the substance. Then, calculate the energy required for the phase changes. Finally, add all the energy values together to find the total amount of energy absorbed.

The total amount of energy absorbed by a substance as it completely changes from a solid to a gas can be calculated using the formula:

Q = m × ΔH

Where:
- Q is the total energy absorbed
- m is the mass of the substance
- ΔH is the enthalpy change of the substance

First, calculate the energy required to raise the temperature of the substance from 40°C to its melting point. Then, calculate the energy required to change the substance from a solid to a liquid. Next, calculate the energy required to raise the temperature of the substance from its melting point to its boiling point. Finally, calculate the energy required to change the substance from a liquid to a gas. Add all these energy values together to find the total amount of energy absorbed.

https://brainly.com/question/27508106

#SPJ12

The displacement of the ball is 45 meters elapsed time is 3 seconds, and the direction is toward the goal. Therefore, the average velocity is 15m/s. Therefore, option (B) is correct.

The velocity of a moving object can be described as a vector measurement of the direction and the rate of motion of an object. The velocity can be defined as the change in the position of the object w.r.t. time.

Velocity can be described as a vector parameter as it exhibits both magnitude and direction. A mathematical expression to determine velocity is shown below:

v = d / t

where d is the distance moved by an object, and t is the time.

Given, the length of the soccer field = 90 meter

The distance traveled by the ball from halfway down the soccer field,

d = 90/2 = 45 m

The time taken by the ball, t = 3s

The average velocity of the ball, v = 45/3 = 15 m/s

Learn more about velocity, here:

brainly.com/question/19979064

#SPJ2

Answer:

Explained

Explanation:

A student who runs every day is becoming bored with her physical fitness routine and considers quitting. Now in order maintain her fitness routine she needs to break the monotony by changing her exercise regime. She do other activities like play sports two days a week, she do aerobics, she even try some cardio vascular exercises which as good as running. She also try changing her route of running as the new view might inspire her.

Final answer:

Water turns to steam by absorbing energy that increases the kinetic and potential energy of water molecules, allowing them to escape into the air as gas. So the correct option is C.

Explanation:

When water turns to steam, it absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas. During the process of boiling, heat energy increases the water molecules' kinetic energy, leading to the breaking of hydrogen bonds that held water molecules close together. When these bonds break, water molecules can move freely and escape into the air as steam or water vapor. This endothermic transition requires a significant amount of energy due to water's high heat of vaporization.

The correct statement describing this change of state is thus:
C.The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas.

Answer:

The force needed is 400 Newtons.

Explanation:

The force can be determined by means of Newton's law.

[tex]F = m \cdot a[/tex]  (1)

Where F is the force needed to stop the football player, m is the mass of the football player and a is the acceleration.

[tex]F = (80 kg)\cdot (5m/s^{2})[/tex]            

[tex]F = 400 kg.m/s^{2}[/tex]

However, 1N = 1 kg.m/s^{2}

[tex]F = 400 N[/tex]

Hence, the force needed is 400 Newtons.        

Net force that is required to bring the car to a halt =6400 N

Explanation:

Using kinematic equation to calculate the acceleration a

Vf²= Vi²+ 2 a d

Vf= final velocity=0

Vi= initial velocity= 20 m/s

a= acceleration

d= distance=50 m

0²= (20)²+ 2 a (50)

a=-4 m/s²

Now force= F = ma

m= mass= 1600 kg

F= 1600 (-4)

F=-6400 N

negative sign indicates that the force is opposing the motion of the car.

Answer:

If the work done by us is greater than the excavator in the given time then we can produce more power than excavator.

Explanation:

Power is defined as work done per unit time. Let’s take an example:

Case I:

If we do 300J work in 2 seconds and excavator 500J work in the same time then:

Power produced by us = 300/2 = 150 watt

Power produced by excavator = 500/2 = 250 watt

In this case power produced by excavator is more than us.

Case II:

If we do 500J work in 2 seconds and excavator 300J work in the same time then:

Power produced by us = 500/2 = 250 watt

Power produced by excavator = 300/2 = 150 watt

In this case power produced by us is more than excavator.

Hence, If the work done by us is greater than the excavator in the given time then we can produce more power than excavator. But it is very difficult to believe in reality.

Between the earth and the moon we have that the highest temperature is the moon, because it blocks the sun from the earth causing it to heat up more.

The average temperature of the planet is measured through the variation of the temperature of the sea waters. Scientists and researchers emit low-frequency sound waves through the deepest waters of the Pacific Ocean. There are strategic listening points at various locations on the other side of the Pacific that pick up these sounds.

The Moon has no atmosphere, so temperatures range from -184 degrees Celsius at night to 214 degrees Celsius during the day, with the exception of the poles where the temperature is constantly -96 degrees Celsius.

Earth has a lower average temperature than the moon. The moon has far more average temperature than the earth because the earths atmosphere blocks the suns radiation from directly hiting it.

See more about atmosphere at brainly.com/question/13958926

Answer:

Part 1 Answer: The moon.

Part 2 Answer: The moon doesn't have an atmosphere, meaning it cant let off any of the sun's heat, making the surface temperature very hot compared to Earth's.

Explanation:

I did my research, and this is correct. I hope I helped somebody :)

In the illustration, the light ray is indeed reflected. Here's why:

Reflection is the phenomenon where light bounces off a surface and changes its direction. In the image, the light ray bends sharply back upon hitting the object, indicating this type of interaction.

Absorption occurs when light is captured by a material and converted into another form of energy, like heat. The illustration doesn't show any such energy dissipation.

Refraction refers to the bending of light as it passes from one medium to another, like air to water. The object appears solid with no clear interface for refraction to occur.

Stopped wouldn't be an accurate description as the light changes direction upon hitting the object. It continues propagating, just in a different path.

Therefore, reflected is the most fitting description for the behavior of the light ray in the illustration.

Answer:

cod

Explanation:

hope this helps!