A 640-N hunter gets a rope around a 3200-N polar bear. They are stationary, 20m apart, on frictionless level ice. When the hunter pulls the polar bear to him, the polar bear will move: A. 1:0m B. 3:3m C. 10m D. 12m E. 17m

Answer:

To the nearest integer, the penny's speed in m/s be right as it reaches the ground if it was dropped from rest = 91 m/s

Explanation:

We have equation of motion

S = ut + 0.5at²

Here u = 0, a = g  and t = 9.3 s

We have equation of motion v = u +at

Substituting

       v = u +at

       v = 0 + 9.8 x 9.3 = 91.14 m/s

To the nearest integer, the penny's speed in m/s be right as it reaches the ground if it was dropped from rest = 91 m/s

Given:

mass of satellite, m = 1710 kg

altitude, h = [tex]2.6\times 10^{6} m[/tex]

G =  [tex]6.67\times 10^{-11} [/tex]

we know

mass of earth, [tex]M_{E}[/tex] =  [tex]5.972\times 10^{24} kg[/tex]

Here, according to question we will consider

[tex]2M_{E}[/tex] =  [tex]11.944\times 10^{24} kg[/tex]

radius of earth,  [tex]R_{E}[/tex] =  [tex]6.371\times 10^{6} m[/tex]

Formulae Used and replacing [tex]M_{E}[/tex] by  [tex]2M_{E}[/tex] :

1). [tex]v = \sqrt{\frac{2GM_{E}}{R_{E} + h}}[/tex]

2). [tex]T = \sqrt{\frac{4\pi ^{2}(R_{E} + h)^{3}}{2GM_{E}}}[/tex]

3). [tex]KE = \frac{1}{2}mv^{2}[/tex]

4). [tex]Total Energy, E = -\frac{2GM_E\times m}{2(R_{E} + h)}[/tex]

where,

v = orbital velocity of satellite

T = time period

KE = kinetic energy

Solution:

Now, Using Formula (1), for orbital velocity:

 [tex]v = \sqrt{\frac{6.67 \times 10^{-11} \times 11.944 \times 10^{24}}{6.371 \times 10^{6} + 2.6 \times 10^{6}}[/tex]

v =  [tex]9.423 \times 10^{3}[/tex]  m/s

Using Formula (2) for time period:

[tex]T = \sqrt{\frac{4\pi ^{2}(6.371\times 10^{6} + 2\times 10^{6})^{3}}{6.67\times 10^{-11}\times 9.44\times 10^{24}}}[/tex]

[tex]T = 6.728\times 10^{3} s[/tex]

Now, Using Formula(3) for kinetic energy:

[tex]KE = \frac{1}{2}(9.44\times 10^{24})(9.42\times 10^{3})^{2}[/tex]

[tex]KE = \frac{1}{2}(1710)(9.42\times 10^{3})^{2} = 7.586\times 10^{10} J[/tex]

Now, Using Formula(4) for Total energy:

[tex]E = -\frac{6.67\times 10^{-11}\times 9.44\times 10^{24}\times 1710}{2( 6.371\times 10^{6} + 2.6\times 10^{6})}[/tex]

[tex]E = - 7.59\times 10^{10} J[/tex]

Answer:

Force on eardrum

       [tex]F=29400\times 1\times 10^{-4}=2.94N[/tex]

Explanation:

Force = Pressure x Area

Pressure = hρg

Height, h = 3 m

ρ = 1000 kg/m³

g = 9.8 m/s²

Pressure = hρg = 3 x 1000 x 9.8 = 29400 N/m²

Area = 1 cm²

Force on eardrum

       [tex]F=29400\times 1\times 10^{-4}=2.94N[/tex]

Answer:

k = 212.55 newton per meter

Explanation:

A girl is standing on a trampoline. Her mass is 65 kg and she is able to jump 3 meters.

We have to find the spring constant.

Since by Hooke's law,

F = -kx

Where F = force applied by the spring

k = spring constant

x = displacement

And we know force applied by the spring will be equal to the weight of the girl.

So, F = mg

Therefore, (-mg) = -kx

65×(9.81) = k×(3)

k = [tex]\frac{(65)(9.81)}{3}[/tex]

k = 212.55 N per meter

Therefore, spring constant of the spring is 212.55 Newton per meter.

Answer:

E =  ρ ( R1²) / 2 ∈o R

Explanation:

Given data

two cylinders are parallel

distance = d

radial distance = R

d < (R2−R1)

to find out

Express answer in terms of the variables ρE, R1, R2, R3, d, R, and constants

solution

we have two parallel cylinders

so area is 2 [tex]\pi[/tex] R × l

and we apply here gauss law that is

EA = Q(enclosed) / ∈o   ......1

so first we find  Q(enclosed) = ρ Volume

Q(enclosed) = ρ ( [tex]\pi[/tex] R1² × l )

so put all value in equation 1

we get

EA = Q(enclosed) / ∈o

E(2 [tex]\pi[/tex] R × l)  = ρ ( [tex]\pi[/tex] R1² × l ) / ∈o

so

E =  ρ ( R1²) / 2 ∈o R

Final answer:

The resulting electric field in the specified region can be calculated using Gauss' Law. The equation for the electric field in that region is [tex]E = 2\pi R_1^2ho_E[/tex].

Explanation:

The resulting electric field in the region R>R3 is:

[tex]E = 2\pi R_1^2ho_E[/tex]

where R_1 is the radius of the inner cylinder, and ρ_E is the charge density. This expression is obtained by applying Gauss' Law for the region where R1 < r < R2.

Answer:

Contraction of Chicago concrete walkway = 8.64 x 10⁻³ m

Explanation:

Thermal expansion or compression is given by ΔL = LαΔT

Here Length of Chicago concrete walkway, L = 18 m

         Change in temperature, ΔT = (-16 - 24) = -40 °C

         Coefficient of thermal expansion for concrete, α = 12 x 10⁻⁶ °C⁻¹

Substituting

    ΔL = LαΔT = 18 x 12 x 10⁻⁶ x (-40) = -8.64 x 10⁻³ m

Contraction of Chicago concrete walkway = 8.64 x 10⁻³ m

Answer:

[tex]\mu_k = 0.15[/tex]

Explanation:

according to the kinematic equation

[tex]v^{2} - u^{2} = 2aS[/tex]

Where

u is initial velocity  = 0 m/s

a = acceleration

S is distance = 8.00 m

final velocity = 1.0 m/s

[tex]a = \frac {v^{2}}{2S}[/tex]

[tex]a = \frac {1{2}}{2*8.6}[/tex]

a = 0.058 m/s^2

from newton second law

Net force = ma

[tex]f_{net} = ma[/tex]

F - f = ma

2[tex]5 - \mu_kN = ma[/tex]

[tex]25 - \mu_kmg = ma[/tex]

[tex]\frac {25 - ma}{mg} =\mu_k[/tex]

[tex]\frac {25 - 16*0.058}{16*9.81} = 0.15[/tex]

[tex]\mu_k = 0.15[/tex]

Answer:

The acceleration of the crate is 1 m/s²

Explanation:

It is given that,

Mass of the crate, m = 5 kg

Two forces applied on the crate i.e. one is 3.0 N to the north and the other is 4.0 N to the east. So, there resultant force is :

[tex]F_{net}=\sqrt{3^2+4^2} =5\ N[/tex]

We need to find the acceleration of the crate. It is given by using the second law of motion as :

[tex]a=\dfrac{F_{net}}{m}[/tex]

[tex]a=\dfrac{5\ N}{5\ kg}[/tex]

a = 1 m/s²

So, the acceleration of the crate is 1 m/s². Hence, this is the required solution.  

The magnitude of the acceleration of a crate with forces of 3.0 N north and 4.0 N east applied to it is 1.0 m/s². This is found using the Pythagorean theorem to calculate the resultant force and Newton's Second Law to calculate acceleration.

The forces are 3.0 N to the north and 4.0 N to the east on a 5.0-kg crate. Since the forces are perpendicular, we can use the Pythagorean theorem to find the resultant force. The resultant force (Fr) is √(3.02 + 4.02) N, which is 5.0 N. According to Newton's Second Law, F = ma, hence acceleration (a) is Fr divided by the mass (m). Calculating acceleration: a = 5.0 N / 5.0 kg = 1.0 m/s2. Therefore, the correct answer is a. 1.0 m/s2.

Answer:

b) Projectile MOTION

Explanation:

SHM is periodic motion or to and fro motion of a particle about its mean position in a straight line

In this type of motion particle must be in straight line motion

So here we can say

a) Simple Pendulum : it is a straight line to and fro motion about mean position so it is a SHM

b) Projectile motion : it is a parabolic path in which object do not move to and fro about its mean position So it is not SHM

d) Spring Motion : it is a straight line to and fro motion so it is also a SHM

So correct answer will be

b) Projectile MOTION

Final answer:

Projectile motion is not a simple harmonic motion because it does not meet the conditions for SHM.

Explanation:

Simple Harmonic Motion (SHM) is a special type of periodic motion where the restoring force is proportional to the displacement. The three conditions that must be met to produce SHM are: a linear restoring force, a constant force constant, and no external damping forces. Based on these conditions, the answer to the question is (b) Projectile motion, as it does not meet the conditions for SHM. A projectile follows a parabolic path and does not have a linear restoring force.

Answer:

The distance of bob when Alice starts running is 50 m.

Explanation:

Given that,

Speed v = 10.0 m/s

Time t = 5 sec

We need to calculate the distance

Using formula of distance

[tex]D=v\times t[/tex]

[tex]D=10\times5[/tex]

[tex]D=50\ m[/tex]

Hence, The distance of bob when Alice starts running is 50 m.

To calculate the diffusion flux at 1000˚C for the same concentration gradient, use the Arrhenius equation.

J ≈ 2.4 × 10-12 kg/m2-s

To calculate the diffusion flux at 1000˚C (1273 K) for the same concentration gradient, we can use the Arrhenius equation:

J = J0 * exp(-Q/RT)

Where J is the diffusion flux, J0 is the pre-exponential factor, Q is the activation energy for diffusion, R is the gas constant, and T is the absolute temperature.

Given that the diffusion flux at 1220˚C (1493 K) is 7.8 × 10-8 kg/m2-s and the activation energy for diffusion is 145,000 J/mol, we can calculate the diffusion flux at 1000˚C as:

J = (7.8 × 10-8) * exp(-145000/(8.314*1273))

J ≈ 2.4 × 10-12 kg/m2-s

https://brainly.com/question/33319237

#SPJ12

To calculate the steady-state diffusion flux at a different temperature, use the Arrhenius equation to find the diffusion coefficients at the two temperatures, and find the ratio based on the fact that the diffusion flux is proportional to the diffusion coefficient when the concentration gradient is constant. Input the known values into the equation to solve for the unknown diffusion flux.

The steady-state diffusion through a metal plate can be calculated using the Arrhenius equation, which relates the diffusion coefficient (D) to temperature. The equation is D = D0e^-(Q/RT), where D0 is the pre-exponential factor, Q is the activation energy for diffusion, R is the gas constant and T is the temperature in K.

Given that the diffusion flux (J) is defined as J = -D×(dc/dx), where dc/dx is the concentration gradient. We can find that when the concentration gradient remains the same, the ratio of the two diffusion fluxes at different temperatures can be represented as J1/J2 = D1/D2.

Substitute the Arrhenius equation into the ratio, we get J1/J2 = e^(Q/R)×(1/T1-1/T2). Then you can use the given values, namely Q = 145,000 J/mol, R = 8.314 J/(mol×K), and temperatures T1 = 1493K , T2 = 1273K, as well as the known J1, to calculate J2.

https://brainly.com/question/9128896

#SPJ11

Answer:

a) 0.0693 m

b) Work done = 8.644 J

Explanation:

Given:

Spring constant, k = 3600 N/m

Radius of the piston, r = 0.028 m

Now, we know that the atmospheric pressure at STP = 1.01325 × 10⁵ Pa  = 101325 Pa

Now,

The force ([tex]F_P[/tex]) due to the atmospheric pressure on the piston will be:

[tex]F_P[/tex] = Pressure × Area of the piston

on substituting the values we get,

[tex]F_P[/tex] = 101325 × πr²

F = 101325 × π × (0.028)² = 249.56 N

also,

Force on spring is given as:

F = kx

where,

x is the displacement in the spring

 on substituting the values we get,

 249.56 N = 3600N/m × x

or

x = 0.0693 m

thus, the compression in the spring will be = 0.0693 m

b) Applying the concept of conservation of energy

we have,

Work done by the atmospheric pressure in compressing the spring = Potential energy gained  by the spring

mathematically,

[tex]W = \frac{1}{2}kx^2[/tex]

 on substituting the values we get,

[tex]W = \frac{1}{2}\times 3600\times (0.0693)^2[/tex]

W = 8.644 J

a) x = 0.0693 m

b) W = 8.644 J

Given :

Spring constant, K = 3600 N/m

Radius of the piston, r = 0.028 m

Solution :

Now the atmospheric pressure at STP = 1.01325 × 10⁵ Pa  = 101325 Pa

Force due to the atmospheric pressure on the piston is,

Force = Pressure × Area of the piston

on substituting the values we get,

[tex]\rm F_P = 101325\times \pi r^2[/tex]

[tex]\rm F_P = 249.56\;N[/tex]

a) We know that the force on spring is given by,

F = Kx

where, k is spring constant and x is the displacement in the spring.

[tex]249.56 = 3600\times x[/tex]

[tex]\rm x = 0.0693\;m[/tex]

b) We know that the Work Done is given by,

[tex]\rm W= \dfrac{1}{2} k x^2[/tex]

[tex]\rm W = 0.5\times 3600\times (0.0693)^2[/tex]

W = 8.644 J

For more information, refer the link given below

https://brainly.com/question/22599382?referrer=searchResults

Answer:

0.5 Ns

Explanation:

When a large force acting on a body for a very small time it is called impulsive force.

Impulse = force × small time

Impulse = 25 × 0.02 = 0.5 Ns

It is a vector quantity

Answer:

The acceleration of the ball is 666.67 m/s²

Explanation:

It is given that,

Mass of the baseball, m = 0.15 kg

Applied force to it, F = 100 N

We need to find the acceleration of the ball. It can be calculated using Newton's second law of motion as :

F = ma

[tex]a=\dfrac{F}{m}[/tex]

[tex]a=\dfrac{100\ N}{0.15\ kg}[/tex]

[tex]a=666.67\ m/s^2[/tex]

So, the acceleration of the ball is 666.67 m/s². Hence, this is the required solution.

Answer:

The input current is 0.05 A.

Explanation:

Given that,

Output voltage = 7.50 V

Output current = 1.6 A

Input voltage = 240 v

We need to calculate the input current

The efficiency is 100% so.

Input power = output power

[tex]\dfrac{V_{i}}{V_{o}}=\dfrac{I_{o}}{I_{i}}[/tex]

[tex]\dfrac{240}{7.50}=\dfrac{1.6}{I_{i}}[/tex]

[tex]I_{i}=\dfrac{1.6\times7.50}{240}[/tex]

[tex]I_{i}=0.05\ A[/tex]

Hence, The input current is 0.05 A.

The input current Ip for the plug-in transformer for a laptop computer in amps is 0.05 A.

The primary winding of the transformer converts the electric power into the magnetic power, and the secondary winding of the transformer converts it back into the required electric power.

The ratio of the input voltage to the output voltage is equal to the ratio of output current to the input current of the transformer (for 100 percent efficiency). Therefore

[tex]\dfrac{V_i}{V_o}=\dfrac{I_o}{I_i}[/tex]

The input and output voltage of the transformer is 240 V and 7.50 V respectively and the output current is 1.6 amp.

As, the efficiency of the transformer is 100 percent. Thus, put the values in the above formula as,

[tex]\dfrac{240}{7.50}=\dfrac{1.6}{I_i}\\I_i=0.05\rm A[/tex]

Thus, the input current Ip for the plug-in transformer for a laptop computer in amps is 0.05 A.

Learn more about the transformer here;

https://brainly.com/question/1312500

C. [tex]E_{k}=2.03x10^{11}J[/tex]

The kinetic energy of a body is the ability to perform work due to its movement given by the equation [tex]E_{k}=\frac{1}{2}mv^{2}[/tex].

To calculate the kinetic energy of a rocket with mass 15000kg and speed of 5200m/s:

[tex]E_{k}=\frac{1}{2}(15000kg)(5200m/s)^{2}=202800000000J=2.03x10^{11}J[/tex]

The equation of motion of a pendulum is:

[tex]\dfrac{\textrm{d}^2\theta}{\textrm{d}t^2} = -\dfrac{g}{\ell}\sin\theta,[/tex]

where [tex]\ell[/tex] it its length and [tex]g[/tex] is the gravitational acceleration. Notice that the mass is absent from the equation! This is quite hard to solve, but for small angles ([tex]\theta \ll 1[/tex]), we can use:

[tex]\sin\theta \simeq \theta.[/tex]

Additionally, let us define:

[tex]\omega^2\equiv\dfrac{g}{\ell}.[/tex]

We can now write:

[tex]\dfrac{\textrm{d}^2\theta}{\textrm{d}t^2} = -\omega^2\theta.[/tex]

The solution to this differential equation is:

[tex]\theta(t) = A\sin(\omega t + \phi),[/tex]

where [tex]A[/tex] and [tex]\phi[/tex] are constants to be determined using the initial conditions. Notice that they will not have any influence on the period, since it is given simply by:

[tex]T = \dfrac{2\pi}{\omega} = 2\pi\sqrt{\dfrac{g}{\ell}}.[/tex]

This justifies that the period depends only on the pendulum's length.

Answer:· Visible light passes through a diffraction grating that has 900 slits per centimeter, and the interference pattern is observed on a screen that is 2.74 m from the grating. In the first-order spectrum, maxima for two different wavelengths are separated on the screen by 3.16 m. What is the difference between these wavelengths? . I know to apply the equation din(theta) = m*wavelength but I'm not sure how to find all the missing variables or to get the difference in wavelengths

Answer:

37.86 kg

Explanation:

The weight of sign board is equally divided on each rope. It means the tension in all the ropes is equal to the weight of the sign board in equilibrium condition.

Tension in each rope = 53 N

Tension in 7 ropes = 7 x 53 N = 371 N

Thus, The weight of sign = 371 N

Now, weight = m g

where m is the mass of sign.

m = 371 / 9.8 = 37.86 kg

Answer:

[tex]6.35\cdot 10^{-9} W[/tex]

Explanation:

The relationship between power and intensity of a sound is given by:

[tex]I=\frac{P}{A}[/tex]

where

I is the intensity

P is the power

A is the area considered

In this problem, we know

[tex]A=2.90\cdot 10^{-3}m^2[/tex] is the surface area of the ear

[tex]I = 2.19\cdot 10^{-6} W/m^2[/tex] is the intensity of the sound

Re-arranging the equation, we can find the power intercepted by the ear:

[tex]P=IA=(2.19\cdot 10^{-6} W/m^2)(2.90\cdot 10^{-3} m^2)=6.35\cdot 10^{-9} W[/tex]

Answer:

The radius of the sphere is 3.6 m.

Explanation:

Given that,

Potential of first sphere = 450 V

Radial distance = 7.2 m

If the potential of sphere =150 V

We need to calculate the radius

Using formula for potential

For 450 V

[tex]V=\dfrac{kQ}{r}[/tex]

[tex]450=\dfrac{kQ}{r}[/tex]....(I)

For 150 V

[tex]150=\dfrac{kQ}{r+7.2}[/tex]....(II)

Divided equation (I) by equation (II)

[tex]\dfrac{450}{150}=\dfrac{\dfrac{kQ}{r}}{\dfrac{kQ}{r+7.2}}[/tex]

[tex]3=\dfrac{(r+7.2)}{r}[/tex]

[tex]3r=r+7.2[/tex]

[tex]r=\dfrac{7.2}{2}[/tex]

[tex]r=3.6\ m[/tex]

Hence, The radius of the sphere is 3.6 m.

The radius of the sphere whose surface has a potential difference of  450 V is 3.6 m.

We know that the potential difference can be written as,

[tex]V = k\dfrac{Q}{R}[/tex]

We know that at  R= R, Potential difference= 450 V,

[tex]450 = k\dfrac{Q}{R}[/tex]

Also, at R = (R+7.2), Potential difference = 150 V,

[tex]150 = k\dfrac{Q}{(R+7.2)}[/tex]

Taking the ratio of the two,

[tex]\dfrac{450}{150} = \dfrac{kQ}{R} \times \dfrac{(R+7.2)}{kQ}\\\\\dfrac{450}{150} = \dfrac{(R+7.2)}{R}\\\\R = 3.6\ m[/tex]

Hence, the radius of the sphere whose surface has a potential difference of  450 V is 3.6 m.

Learn more about Potential differences:

https://brainly.com/question/118936

•If a system gains 757 kJ of heat, resulting in a change in internal energy of the system equal to +176 kJ. How much work is done is  - 581 kJ

•The correct statement is: Work was done by  the system

Let Change in internal energy ΔU = 176 kJ

Let Heat gained by the system (q) = 757 kJ

Using the  First law of thermodynamics

ΔU = q + w

Where:

ΔU  represent  change in internal energy

q represent  heat added to system and w is work done.

Let plug in the formula

176 kJ = 757 kJ + w

w = 176 kJ - 757 kJ

w= - 581 kJ

Based on the above calculation the negative sign means  that work is done by the system

Inconclusion:

•If a system gains 757 kJ of heat, resulting in a change in internal energy of the system equal to +176 kJ. How much work is done is  - 581 kJ

•The correct statement is: Work was done by  the system

Learn more here:

https://brainly.com/question/20309171?referrer=searchResults

The amount of work done by the system, based on given heat gain and change in internal energy is 581 kJ, meaning the work was done by the system.

The question asks about the amount of work done by or on a system in the field of thermodynamics. According to the first law of thermodynamics, the change in internal energy of a system (ΔU) is equal to the heat added to the system (Q) minus the work done by the system (W), or written as ΔU = Q - W. In this case, the heat added to your system was 757 kJ and the change in internal energy of the system was +176 kJ.

So we have: 176 kJ = 757 kJ - W. Subtracting 757 kJ from both sides of the equation would give us W = 757 kJ - 176 kJ. This results in the value of W = 581 kJ. Conclusively, since W is positive, we say that work was done by the system.

https://brainly.com/question/35546325

#SPJ3

Answer:

(a): The bird speed after swallowing the insect is V= 4.83 m/s

(b): The impulse on the bird is I= 0.3 kg m/s

(c): The force between the bird and the insect is F= 20 N

Explanation:

ma= 0.3 kg

va= 6 m/s

mb= 0.01kg

vb= 30 m/s

(ma*va - mb*vb) / (ma+mb) = V

V= 4.83 m/s (a)

I= mb * vb

I= 0.3 kg m/s  (b)

F*t= I

F= I/t

F= 20 N (c)

This physics problem uses the principle of conservation of momentum to calculate the bird's speed after swallowing the insect, the impulse experienced by the bird, and the force between the bird and the insect.

This is a physics problem relating to the conservation of momentum. Let's start by defining some facts, where m bird = 0.3 kg and v bird = 6.0 m/s are the mass and speed of the bird before the incident and m insect = 0.01 kg and v insect = 30 m/s are the mass and speed of the insect.

a. To find the bird's speed immediately after swallowing the insect, we need to apply the conservation of momentum principle: initial total momentum = final total momentum, which can be written as m bird * v bird + m insect * v insect = (m bird + m insect) * v final.

b. The impulse on the bird equals the change in momentum of the bird, thus equals to the final momentum of the bird - initial momentum of the bird.

c. The force between the bird and the insect is obtained from the definition of impulse: Force * time = impulse, or Force = Impulse/time.

https://brainly.com/question/30801640

#SPJ3

Answer:

1.176m

Explanation:

Local ambient pressure(P1) = 100 kPa

Absolute pressure(P2)=260kPa

Net pressure=absolute pressure-local ambient absolute pressure

Net pressure=P1(absolute pressure)-P2(local ambient absolute pressure)

Net pressure=260-100=160kPa

Pressure= ρgh

160kPa=13600*10*h

h=[tex]\frac{160000}{136000}[/tex]

h=1.176m

Answer:

The dose absorbed by the person's body is 52600 mrem.

Explanation:

Given that,

Radiation = 52.6 rad

We need to calculate the absorbed dose

We know that,

The equivalent dose is equal to the absorbed radiation for beta source.

So, The patient is exposed 52.6 rad of radiation.

Therefore, The absorbed radiation is equal to the exposed 52.6 rad of radiation.

[tex]1 rad = \dfrac{1\ rem}{1000\ mrem}[/tex]

So, radiation absorbed = 52.6 rad

[tex]radiation\ absorbed =52.6\times1000\ mrem[/tex]

[tex]radiation\ absorbed = 52600\ mrem[/tex]

Hence, The dose absorbed by the person's body is 52600 mrem.

Answer:

Electric force between the charges, [tex]F=1.35\times 10^{10}\ N[/tex]

Explanation:

It is given that,

Charge 1, q₁ = 3 C

Charge 2, q₂ = 2 C

Distance between them, r = 2 m

We need to find the electric force between them. The formula for electric force is given by :

[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]

k is the electrostatic constant

[tex]F=9\times 10^9\times \dfrac{3\ C\times 2\ C}{(2\ m)^2}[/tex]

[tex]F=1.35\times 10^{10}\ N[/tex]

So, the force between the charges is [tex]1.35\times 10^{10}\ N[/tex]. Hence, this is the required solution.

To allow the electron to pass through the region without being deflected, the magnetic field should be equal and opposite to the electric field with a magnitude of 5.0 x 10^3 T in the -i^ direction.

The force experienced by an electron moving in a magnetic field is given by the formula F = qvB sin(θ), where q is the charge of the electron, v is its velocity, B is the magnetic field, and θ is the angle between the direction of velocity and the magnetic field. To allow the electron to pass through the region without being deflected, the magnetic force should be equal and opposite to the electric force. Since the electric field is in the j^ direction, the magnetic field should be in the -i^ direction with a magnitude of 5.0 x 10^3 T.

https://brainly.com/question/36936308

#SPJ12

To prevent the electron from being deflected, the magnetic field should be [tex]2.0 \times 10{^-4} T[/tex]. This is calculated by balancing the electric and magnetic forces acting on the electron.

To determine the magnetic field that allows an electron to pass through a region with perpendicular electric and magnetic fields without being deflected, we use the concept of force balance. When the forces from the electric field and the magnetic field are equal and opposite, the electron will move in a straight line without deflection. Given the electron's velocity[tex]v = 5.0 \times 10^7 m/s \hat i[/tex] and the electric field [tex]E = 10^4 V/m \hat j[/tex], we can use the formula:

[tex]qE = qvB[/tex]

Here, q is the charge of the electron, E is the magnitude of the electric field, v is the electron's velocity, and B is the magnetic field strength. Solving for B, we get:

[tex]B = E/v[/tex]

Plug in the given values:

[tex]B = 10^4 V/m / 5.0 \times 10^7 m/s[/tex]

This simplifies to:

[tex]B = 2.0 \times 10^{-4} T[/tex]

Therefore, the magnetic field required is [tex]2.0 \times 10^{-4} T[/tex].

Answer:

A positive charge experiences a force in the direction of an electric field.

Explanation:

Electric field is defined as the electric force acting per unit positive charge. Mathematically, it is given by :

[tex]E=\dfrac{F}{q}[/tex]

We know that like charges repel each other while unlike charges attract each other. The direction of electric field is in the direction of electric force. For a positive charge the field lines are outwards and for a negative charge the electric field lines are inwards.

So, the correct option is (b) "A positive charge experiences a force in the direction of an electric field".

Answer:

0.84 Ω

Explanation:

r = mean radius of the turn = 6.5 mm

n = number of turns of copper wire = 150

Total length of wire containing all the turns is given as

L = 2πnr

L =  2 (3.14)(150) (6.5)

L = 6123 mm

L = 6.123 m

d = diameter of the wire = 0.4 mm = 0.4 x 10⁻³ m

Area of cross-section of the wire is given as

A = (0.25) πd²

A = (0.25) (3.14) (0.4 x 10⁻³)²

A = 1.256 x 10⁻⁷ m²

ρ = resistivity of copper = 1.72 x 10⁻⁸ Ω-m

Resistance of the coil is given as

[tex]R = \frac{\rho L}{A}[/tex]

[tex]R = \frac{(1.72\times 10^{-8}) (6.123))}{(1.256\times 10^{-7}))}[/tex]

R = 0.84 Ω

Answer:

The average total energy density of this electromagnetic wave is [tex]72.5\ \mu\ J/m^3[/tex].

Explanation:

Given that,

Magnetic field [tex]B = 13.5\mu T[/tex]

We need to calculate the average total energy density

Using formula of energy density

[tex]Energy\ density =\dfrac{S}{c}[/tex]....(I)

Where, S = intensity

c = speed of light

We know that,

The intensity is given by

[tex]S = \dfrac{B^2c}{2\mu_{0}}[/tex]

Put the value of S in equation (I)

[tex]Energy\ density =\dfrac{\dfrac{B^2c}{2\mu_{0}}}{c}[/tex]

[tex]Energy\ density = \dfrac{(13.5\times10^{-6})^2}{2\times4\pi\times10^{-7}}[/tex]

[tex]Energy\ density = 0.0000725\ J/m^3[/tex]

[tex]Energy\ density = 72.5\times10^{-6}\ J/m^3[/tex]

[tex]Energy\ density = 72.5\ \mu\ J/m^3[/tex]

Hence, The average total energy density of this electromagnetic wave is [tex]72.5\ \mu\ J/m^3[/tex].