The speed at which the ball hits the ground, the time it remains in the air, and the maximum height it attains can be calculated using the initial vertical and horizontal velocities and the acceleration due to gravity.
Explanation:Given the ball is launched with an initial horizontal velocity (Vx) of 22 m/s and a vertical velocity (Vy) of 13 m/s. The acceleration due to gravity (g) is -9.81 m/s2.
(a) Speed when the ball hits the ground:
Using the kinematic equation, we have Vy_final = Vy - g*t, where t is the time. The total final velocity as the ball hits the ground is given by V_final = sqrt(Vx2 + Vy_final2).
(b) Time the ball remains in the air:
The ball reaches its maximum height when Vy_final=0. So, 0=Vy-g*t => t=Vy/g. As the motion is symmetrical, the total time in air would be 2*t.
(c) Maximum height attained:
Using the formula for maximum height H = Vy2/2g.
Learn more about Projectile motion here:https://brainly.com/question/29545516
#SPJ3
A camera with a 50.0-mm focal length lens is being used to photograph a person standing 3.00 m away. if the film is 36.0 mm high, what fraction of a 1.75-m-tall person will fit on it?
When violet light of wavelength 415 nm falls on a single slit, it creates a central diffraction peak that is 9.90 cm wide on a screen that is 2.53 m away. how wide is the slit?
Final answer:
The width of the slit when violet light of 415 nm wavelength creates a central diffraction peak of 9.90 cm on a screen 2.53 m away is approximately 10.6 μm.
Explanation:
The wavelength of violet light is given as 415 nm, and it produces a diffraction pattern with a central peak width of 9.90 cm on a screen 2.53 meters away. We can find the width of the slit using the formula for single-slit diffraction:
Δy = λL/a
where Δy is the width of the central peak, λ is the wavelength, L is the distance to the screen, and a is the width of the slit. Rearranging the formula to solve for a, we have:
a = λL/Δy
Substituting the provided values:
a = (415 x 10^-9 m)(2.53 m) / (9.90 x 10^-2 m)
After calculating, we find that the width of the slit (a) is approximately:
a ≈ 1.06 x 10^-5 m or 10.6 μm
Using the single-slit diffraction formula and given values, we calculate the width of the slit to be 21.1 μm.
To solve this problem, we'll use the formula for the width of the central peak in a single-slit diffraction pattern:
w = 2Lλ / aWhere:
w = width of the central peak (9.90 cm = 0.099 m)L = distance from the slit to the screen (2.53 m)λ = wavelength of violet light (415 nm = 415 x 10⁻⁹ m)a = width of the slit (what we need to find)Rearranging the formula to solve for a:
a = 2Lλ / wSubstituting the given values:
a = (2 * 2.53 m * 415 x 10⁻⁹ m) / 0.099 mNow, calculate:
a = 2.11 x 10⁻⁵ m or 21.1 μmTherefore, the width of the slit is 21.1 μm.
What is the resistance of a 1500 w ( 120 v) hair dryer?
b. what is the current in the hair dryer when it is used?
Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.
(a) The resistance of the hairdryer will be 9.6 ohms.
(b)the current in the hairdryer will be 12.5 A.
When all physical parameters and temperature are constant,
Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.
This current-voltage connection may be expressed mathematically as,
The Equation of Ohm's Law
V=IR
(a)
The following data are given as
P = 1500 w
v = 120 v
The power generated in the hairdryer
[tex]\rm{P = vI}\\\\I=\frac{P}{v} \\\\I=\frac{1500}{120}\\\\I=12.5 A}[/tex]
To obtained the resistance
[tex]\rm R=\frac{v}{I} \\\\\rm R=\frac{120}{12.5} \\\\R= 9.6 ohm}[/tex]
Hence the resistance of the hairdryer will be 9.6 ohms.
(b)
The Equation of Ohm's Law
V=IR
[tex]\rm I =\frac{V}{R} \\\\\rm I =\frac{120}{9.6}\\\\\ I= 12.5 A[/tex]
Hence the current in the hairdryer will be 12.5 A.
To learn more the ohm's law refer to the link;
https://brainly.com/question/796939
If 3.0 × 10^15 electrons flow through a section of a wire of diameter 2.0 mm in 4.0 s, what is the current in the wire? (e = 1.60 × 10^-19 c)
The current through the wire is of 0.00012 amperes.
How to find the current?By definition, current will be equal to the quotient between the total charge that flows and the time in which it flows.
Here we have 3.0*10^15 electrons, each one with charge:
e = 1.6*10^(-19) C
Then the total charge that we have is:
Q = (1.6*10^(-19) C)*(3.0*10^15) = 0.00048 C
Finally, the current is:
I = Q/T
where:
Q = 0.00048 CT = 4.0 sI = (0.00048 C)/(4s) = 0.00012 A
If you want to learn more about current, you can read:
https://brainly.com/question/14010194
A light source emits a beam of photons, each of which has a momentum of 2.7 × 10-29 kg·m/s. (a) what is the frequency of the photons? (b) to what region of the electromagnetic spectrum do the photons belong?
The frequency of the photons is equal to 1.22 ×10¹³ Hz and lies in the infrared region of the electromagnetic spectrum.
What is the frequency?The frequency of the photons or light can be described as the number of oscillations in one second. The frequency possesses S.I. units per second or Hertz.
The relationship between momentum (p), frequency (ν), and speed of light (c) is:
p = hν/c
ν = pc/h
Given, the momentum of the photons, p = 2.7 ×10⁻²⁹ Kg.m/s
The speed of light, c = 3×10⁸ m/s
The plank's constant, h = 6.626 ×10⁻³⁴ Js
The frequency of the photons can determine from the above-mentioned relationship:
ν = (2.7 × 10⁻²⁹).( 3 × 10⁸)/ 6.626 × 10⁻³⁴
ν = 1.22 × 10¹³ Hz
Therefore, the frequency of the photons is 1.22 × 10¹³ Hz and lies in the infrared region of the spectrum.
Learn more about frequency, here:
brainly.com/question/18651058
#SPJ2
Calculate the weight ofa 58 kg astronaut on the moon where g=1.6 m/s2
1) A substance has a half life of 20 years. what percentage would be left after 40 years?
2)After 4 half lifes of uranium, 10 grams of the uranium remains. how much uranium did you start with?
Explain why wet clothes that are hung on a washing line dry best
Apply: what will be the total resistance and current in a parallel circuit with a 15-volt battery and three 10-ohm resistors? test your answers with the gizmo.
The total resistance in the parallel circuit with three 10-ohm resistors and a 15-volt battery is approximately 3.33 ohms. The total current through the circuit is approximately 4.50 amps.
To calculate the total resistance in a parallel circuit with three resistors of 10 ohms each, we use the formula for parallel resistance:
[tex]\frac{1}{R_{\text{total}}} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3}[/tex]
Substituting the values:
1/Rtotal = 1/10 + 1/10 + 1/10
1/Rtotal = 3/10
Therefore, Rtotal = 10/3 = 3.33 ohms
Next, we calculate the total current using Ohm's Law:
I = V/Rtotal
Given the battery voltage is 15 volts:
I = 15/3.33 ≈ 4.50 amps
The total resistance in the parallel circuit with three 10-ohm resistors and a 15-volt battery is approximately 3.33 ohms. The total current through the circuit is approximately 4.50 amps.
The absolute (or total) pressure at the bottom of a cylindrical container with a cross-sectional area of 47.0 cm2 and holding a fluid of density 560 kg/m3 is 115 kpa. (a) determine the depth of the fluid.
The fluid's depth in the cylinder can be determined using the equation for fluid pressure, h = P / (pg), and plugging in given values, resulting in an approximated depth of 20.9 meters.
Explanation:The total absolute pressure at a point in a fluid is the sum of the atmospheric pressure and the pressure due to the fluid above the point of reference. The latter is given by the equation P = pgh, where p is the density of the fluid, g is the acceleration due to gravity and h is the height (or depth) of the fluid column above the point of reference. In this scenario, we know P (absolute pressure, 115 kPa), p (density, 560 kg/m3), and g (standard gravity, roughly 9.81 m/s2), and we want to find h.
To find h, we can rearrange our equation: h = P / (pxg) . Plugging the given values we have h=115000Pa/(560kg/m3*9.8m/s2), which gives h = 20.9 m.
This means the depth of the fluid in the cylinder is approximately 20.9 meters.
Learn more about Fluid pressure and depth here:https://brainly.com/question/10269912
#SPJ12
Find the kinetic energy of an electron whose de broglie wavelength is 34.0 nm.
Kinetic energy is a property of a moving item that is affected by both mass and velocity. The electron's kinetic energy with a de-Broglie wavelength of 34nm is 2.06 × [tex]10^-^2^2[/tex]J.
First, we have to convert de Broglie wavelength in m to satisfy the dimensions.
λ = 34.0nm =34×[tex]10^-^9[/tex].
To find kinetic energy we need to find velocity and for that, we need to find momentum by using the formulae:
P= h/λ = 6.6×[tex]10^-^3^4[/tex]/34×[tex]10^-^9[/tex] = 1.94×[tex]10^-^2^6[/tex] kgm/s.
After getting momentum we need to find the velocity
V=p/m = 1.94×[tex]10^-^2^6[/tex] / 9.1×[tex]10^-^3^1[/tex]= 2.13×[tex]10^4[/tex] m/s.
Now we have the value of velocity and by applying it [tex]k=1/2mv^2[/tex], we can find easily find the kinetic energy
[tex]k=1/2mv^2[/tex] = 1/2 (9.1×[tex]10^-^3^1[/tex] kg)×(2.13×[tex]10^4[/tex] m/s[tex])^2[/tex] = 2.06×[tex]10^-^2^2[/tex]J.
Therefore, the kinetic energy of the particle is 2.06×[tex]10^-^2^2[/tex]J.
To know more about energy refer to:
https://brainly.com/question/8630757
The pressure exerted by a phonograph needle on a record is surprisingly large. if the equivalent of 1.00 g is supported by a needle, the tip of which is a circle 0.210 mm in radius, what pressure is exerted on the record in n/m2?
The pressure exerted by a phonograph needle on a record, if the equivalent of 1g is supported by the needle with a radius of 0.210 mm, is approximately 7.05*10^7 Pa or N/m².
Explanation:
The pressure exerted by a phonograph needle on a record is calculated using the formula for pressure: P = F / A . To obtain the force (F), we multiply the mass of the needle (1g or 0.001 kg) by the acceleration due to gravity (9.8 m/s²). This yields a force of 0.0098 N. The area (A) is calculated using the formula for the area of a circle, A=πr², where r is the radius of the needle tip (0.210 mm or 0.00021 m). So, the area amounts to roughly 0.000000139 m². The resulting pressure (P), when calculated comes out to be approximately 7.05*10^7 Pa or N/m².
Learn more about Pressure Exerted by Phonograph Needle here:https://brainly.com/question/36302202
#SPJ3
Make a rule: how would you find the resistance of a parallel circuit with n identical resistors?
To find the resistance of a parallel circuit with n identical resistors, divide the resistance of one resistor by n.
Explanation:The rule to find the resistance of a parallel circuit with n identical resistors is to divide the value of one resistor by the number of resistors (n). So, the formula is Requiv = R/n, where R is the resistance of one resistor and n is the number of resistors in parallel.
When you have n identical resistors in parallel, you can find the equivalent resistance (Requiv) using the formula:
Requiv = R / n
Where:
Requiv is the equivalent resistance of the parallel combination.
R is the resistance of one individual resistor.
n is the number of identical resistors in parallel.
This formula simplifies the calculation and is useful when you want to determine the overall resistance in a parallel circuit, which is a common scenario in electrical circuits and electronics.
Learn more about resistance of parallel circuits here:https://brainly.com/question/32615438
#SPJ3
Nickel is a common ferromagnetic material. t/f
Marie notices that most of her friends have MP3 players that are all made by a certain brand. She wants one, too, but not just any MP3 player. Marie wants to buy the exact same brand that her friends have. She thinks this is the way to fit in. Which term describes why Marie only wants a certain brand of MP3 player
Benjamina started her walk from the front door of her ground floor apartment. She walked 6 meters to the corner of the building and then turned the corner and walked 10 meters to her friend’s apartment. Identify the difference between the distance she walked and her displacement.
Answer:
The change in her position (from beginning to end), along with the direction, is considered her displacement. This value is a measurement and a direction. The total distance along the path from her starting point to her end point is considered her distance. This value is a measurement only.
Explanation:
Which of the following is not a fossil fuel?
a.
oil
c.
coal
b.
natural gas
d.
hydrogen
which change is the best example of a physical change 1) a cookie baking 2) paper burning 3) ice cream melting 4) a nail rusting
A crying baby emits sound with an intensity of 8.0 × 10-8 w/m2. calculate a reasonable estimate for the intensity level from a set of quintuplets (five babies), all crying simultaneously at the same place? the lowest detectable intensity is 1.0 × 10-12 w/m2.
The intensity level from a set of quintuplets (five babies) : 56 dB
Further explanationWave intensity is the power of a wave that is moved through a plane of one unit that is perpendicular to the direction of the wave
Can be formulated
[tex]\rm I=\dfrac{P}{A}[/tex]
I = intensity, W m⁻²
P = power, watt
A = area, m²
The farther the distance from the sound source, the smaller the intensity
[tex]\rm \dfrac{I_2}{I_1}=\dfrac{(r_1)^2}{(r_2)^2}[/tex]
So the intensity is inversely proportional to the square of the distance from the source
[tex]\rm I\approx \dfrac{1}{r^2}[/tex]
Intensity level (LI) can be formulated
[tex]\rm LI=10\:log\dfrac{I}{I_o}[/tex]
Io = 10⁻¹²
For the level of intensity of several sound sources as many as n pieces can be formulated:
LIn = LI1 + 10 log n
The intensity level of 1 baby is
[tex]\rm LI=10\:log\dfrac{8.10^{-8}}{10^{-12}}[/tex]
LI = 10 log 8.10⁴
LI = 49
The intensity level of 5 babies :
LI5 = LI + 10 log n
LI5 = 49 + 10 log 5
LI5 = 49 + 7
LI5 = 56
Learn moreThe intensity of a laser beam
https://brainly.com/question/12873492
electric field
brainly.com/question/2080732
magnetism
brainly.com/question/10809295
Jupiter‘s great red spot is believed to be a
Cyclonic storm -gradpoint
A 10 µf capacitor is charged to 108 v and is then connected across a 328 ω resistor. what is the initial charge on the capacitor? answer in units of µc.
A steam turbine operates at a boiler temperature of 450 k and an exhaust temperature of 300 k. what is the maximum theoretical efficiency of this system?
The maximum theoretical efficiency of a steam turbine operating at a boiler temperature of 450 K and an exhaust temperature of 300 K, as calculated by the Carnot efficiency, is approximately 33%.
Explanation:The efficiency of a heat engine like a steam turbine can be evaluated using the Carnot efficiency formula. The Carnot efficiency formula is 1 - Tc/Th where Tc is the cold reservoir temperature (exhaust temperature) and Th is the hot reservoir temperature (boiler temperature). Given in the problem, Tc=300K and Th=450K:
Efficiency = 1 - Tc/Th
= 1 - 300 K / 450 K = 1 - 0.67 approximately
So, the maximum theoretical efficiency of the steam turbine would be about 33% according to the Carnot efficiency.
Learn more about Carnot efficiency here:https://brainly.com/question/33897912
#SPJ11
Calculate the magnitude of the angular momentum of the earth in a circular orbit around the sun. mastering
Two moles of an ideal gas are compressed in a cylinder at a constant temperature of 80.0 ∘c until the original pressure has tripled. calculate the amount of work done by gas.
The work done by two moles of an ideal gas compressed isothermally in a cylinder can be calculated using the formula W = nRT ln(V1/V2). The work is generally negative as the gas does work on its surroundings during the process.
Explanation:When an ideal gas is compressed in a cylinder, the work done by the gas can be calculated using the principles of thermodynamics. Specifically, if the gas is compressed isothermally (at a constant temperature), the work done by the gas during this process can be calculated using the formula W = nRT ln(V1/V2), where n represents the number of moles of gas, R is the universal gas constant, T is the temperature in Kelvin, and V1 and V2 are the initial and final volumes of the gas respectively.
In the scenario presented, we have 2 moles of gas, a temperature of 80.0°C, and the original pressure being tripled during the compression. This tripling of pressure corresponds to reduction in volume to one third. From these values, we can calculate the work done by the gas during compression. However, we do not have specific information about the volumes or pressures, so we cannot calculate a numerical value. In general, though, we can say the work done by the gas during an isothermal process is negative, as it is compressed and does work on its surroundings.
Learn more about Work Done by Gas here:https://brainly.com/question/32263955
#SPJ11
If a hydrogen atom in the ground state absorbs a photon of energy 12.09 ev, to which state will the electron make a transition?
Discuss five ways human activity has accelerated soil erosion
Answer:
road erosion, house construction, steep slope cultivation, tourism development, and animal trampling.
Explanation:
What is the maximum power consumption of a 3.0-v portable cd player that draws a maximum of 330 ma of current?
Final answer:
The maximum power consumption of a 3.0-v portable CD player drawing 330 mA of current is calculated using the formula P = IV, giving a result of 0.99 W, which is not directly listed in the provided options.
Explanation:
The question asks for the maximum power consumption of a 3.0-volt portable CD player that draws a maximum of 330 milliamps of current. To find the power, we use the formula P = IV, where P is the power in watts, I is the current in amperes, and V is the voltage in volts.
In this case, I = 330 mA = 0.33 A (since 1A = 1000mA), and V = 3.0 V. Substituting these values into the formula gives:
P = 0.33 A × 3.0 V = 0.99 W.
A ball is thrown vertically upward with a speed of 1.53 m/s from a point 4.21 m above the ground. calculate the time in which the ball will reach the ground.
The time in which the ball will reach the ground is about 1.10 s
Further explanationAcceleration is rate of change of velocity.
[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]
[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]
a = acceleration ( m/s² )
v = final velocity ( m/s )
u = initial velocity ( m/s )
t = time taken ( s )
d = distance ( m )
Let us now tackle the problem !
This problem is about Kinematics.
We will solve it in the following way
Given:
initial speed = u = 1.53 m/s
initial height = H = 4.21 m
Unknown:
time taken = t = ?
Solution:
[tex]H = ut - \frac{1}{2}gt^2[/tex]
[tex]-4.21 = 1.53t - \frac{1}{2}(9.8)t^2[/tex]
[tex]-4.21 = 1.53t - 4.9t^2[/tex]
[tex]4.9t^2 - 1.53t - 4.21 = 0[/tex]
We will solve the above equation using the following quadratic function formula:
[tex]t = \frac{1.53 + \sqrt{1.53^2 - 4(4.9)(-4.21)}}{2(4.9)}[/tex]
[tex]t \approx 1.10 ~ s[/tex]
Learn moreVelocity of Runner : https://brainly.com/question/3813437Kinetic Energy : https://brainly.com/question/692781Acceleration : https://brainly.com/question/2283922The Speed of Car : https://brainly.com/question/568302Answer detailsGrade: High School
Subject: Physics
Chapter: Kinematics
Keywords: Velocity , Driver , Car , Deceleration , Acceleration , Obstacle , Speed , Time , Rate
Which choice shows the size range for nanotechnology?
Answer:
C
Explanation:
10–9 m to 10–7 m
The size range for nanotechnology is 10⁻⁹ m to 10⁻⁷ m.
What is nanotechnology?Nanotechnology improves and revolutionize, The new technology used in industry sectors like information technology, homeland security, medicine, transportation, energy, food safety, and environmental science.
A material with its dimensions less than 100 nanometers or ranging between 1 to 100nm are known as nanomaterials.
Thus, the correct choice is C.
Learn more more about nanotechnology
https://brainly.com/question/11946759
#SPJ2
In a typical lightning strike, 2.9 c flows from cloud to ground in 0.18 ms. what is the current during the strike?