A beaker containing mercury is placed inside a vacuum chamber in a laboratory. the pressure at the bottom of the beaker is 26000 pa. what is the height of the mercury in the beaker? the acceleration of gravity is 9.81 m/s 2 .

Answers

Answer 1
The mercury density (at liquid state) is
[tex]\rho = 13.5 g/cm^3=13500 kg/m^3[/tex]

And we know that the pressure at the bottom of a column of fluid is given by (Stevin's law)
[tex]p=\rho g h[/tex]
where
[tex]\rho[/tex] is the liquid density
g is the gravitational acceleration
h is the height of the column of fluid

The pressure at the bottom of the beaker is [tex]p=26000 Pa[/tex], therefore we can re-arrange the previous equation to get the height of the column of mercury
[tex]h= \frac{p}{\rho g}= \frac{26000 Pa}{(13500 kg/m^3)(9.81 m/s^2)}=0.196m = 19.6 cm [/tex]

Related Questions

Why is HIV difficult to treat? Check all that apply.

Answers

On top of this, HIV can even kill uninfected immune system cells, a phenomenon we are just beginning to understand. This is why HIV is named the “human immunodeficiency virus”. When the immune system is damaged, it is treacherously difficult for your body to fight against HIV or other opportunistic infections.

I HOPE IT HELPS 

Well there is not any answer choices so i'ma just tell you what i know about it.

Well the answer is:

A HIV uses the humans immune system to spread and multiply. The immune system is what tackles and kills viruses. With the HIV{ Which is a virus } using the virus killing system, its immune to what the immune system does to kill the HIV virus.

I hope this helps :D 
    

The diagram shows a coiled wire that carries an electrical current. What do the arrows represent?

Answers

The electric field? Sorry if it is incorrect.

energy transfers occur during collisions in chemical and nuclear reactions

true or false

Answers

Energy is transferred during collisions in chemical and nuclear reactions, so the answer is true. When there is a reaction energy is usually transferred. I'm sorry if it is incorrect!

Answer:

The correct answer is True.

Explanation:

Energy transfers occur during collisions in chemical and nuclear reactions. When chemical or nuclear reactions occur, energy is transferred in the form of "heat", which implies a transfer of kinetic, potential and internal energy.

Have a nice day!

On Earth, water can exist as a solid, a liquid, or a gas. Why?

Answers

Molecules in liquid don't all have the same energy, this is why water on Earth can exist as a solid, liquid or gas.

Explanation:

The Earth has perfect conditions which allows water to exist in all the three states. These conditions are:

1. Earth is in the Goldilocks zone around the Sun which results in an optimum temperature.

2. The atmosphere of the Earth maintains suitable temperature and pressure.

The presence of water in all the three forms helped the life to develop on Earth.

Exposure to high energy electromagnetic radiation such as waves can cause cancer sterility and death

Answers

I dont know what it is you are asking but I can definitely say that this is true.

Answer:there’s a blank at “such as___waves”

Explanation:

I need the answer too

Two positions of the sun, moon, and Earth are described below: Position A: Moon is between the sun and Earth Position B: Moon and sun are at right angles to each other relative to Earth

Which statement is true regarding the type of tides that can occur?

A neap tide can occur for both positions A and position B.

A spring tide can occur for both positions A and position B.

A neap tide can occur for position A but not for position B.

A spring tide can occur for position A but not for position B.

Answers

Position A: Moon is between the sun and Earth
Position B: Moon and sun are at right angles to each other relative to Earth 

A spring tide can occur for position A but not for position B.

A spring tide can occur for position A but not for position B. This statement is true regarding the type of tides that can occur. Hence option D is correct.

What is spring tide and neap tides ?

A spring tide, sometimes referred to as a "King Tide," is the term used to describe the tide's springing forth' during new and full moons.

Seven days following a spring tide, there is a period of moderate tides known as a neap tide, which occurs when the sun and moon are at right angles to one another.

The ocean is "tugged" back and forth by the gravitational attraction of the moon and the sun when these bodies interact with the Earth in their monthly and yearly orbits, causing long-period waves to roll around the globe.

Average tidal ranges are a little bit larger during full or new moons, which happen when the Earth, sun, and moon are approximately aligned. That happens twice a month. When the moon lies exactly between the Earth and the sun, it seems fresh (dark). When the Earth is situated between the moon and the sun, the moon seems to be full. In both instances, the Earth's seas bulge a little bit more than usual due to the gravitational attraction of the sun being "added" to that of the moon. This indicates that the high tides are a bit higher and the low tides a little lower than usual.

Hence option D is correct.

To know more about spring tide :

https://brainly.com/question/29417771

#SPJ3.

The material or substance that a wave moves through is called a ____
. The medium affects the speed of the wave that passes through it. One factor that affects the speed of a wave is the ____
of medium. Some waves move faster in solids and some waves move faster in liquids and gases. Another factor that affects wave speed is the ____
of the medium.

Answers

Answer:

The material or substance that a wave moves through is called a MEDIUM. The medium affects the speed of the wave that passes through it. One factor that affects the speed of a wave is the TYPE of medium. Some waves move faster in solids and some waves move faster in liquids and gases. Another factor that affects wave speed is the TEMPERATURE of the medium.

Explanation:

As we know that the speed of the wave is given as

[tex]v = \sqrt{\frac{E}{\rho}}[/tex]

here we know that

E = elasticity of the medium

[tex]\rho [/tex] = density of the medium

So here we know that speed of the wave will change with the elasticity of the medium which meas it is the type of medium on which the speed of wave will depends upon.

Another we can say for liquid or gas we can say that

[tex]\frac{E}{\rho} = \frac{\gamma RT}{M}[/tex]

so speed will depends on the temperature of the medium

so here answers are

1)Medium

2)Type of medium,

3)Temperature

It should be noted that  material or substance that a wave moves through is called a medium.

It should be noted the the medium affects the speed of the wave that passes through it. One factor that affects the speed of a wave is the type of medium.

It should be noted that some waves move faster in solids and some waves move faster in liquids and gases. Another factor that affects wave speed is the  temperature of the medium.

A wave can regarded as the disturbance, it can move through a medium and there are different medium for propagation

The speed of wave can be affected by temperature and some wave moves faster in solids and some waves move faster in liquids .

Learn more about waves at;

https://brainly.com/question/25904079

How crowded is the asteroid belt? do spacecraft have trouble traveling through it? answer?

Answers

The belt is not crowded, so spacecraft do not have the trouble to avoid asteroids to get through it. The asteroid belt is not something you would consider crowded. It should be stressed that asteroids in the belt are not evenly distributed. They are clustered into families and groups. But even such clustering is not worthy of attention compared to the vast space it occupies.
Final answer:

The asteroid belt, although home to a significant portion of known asteroids, isn't as crowded as it may initially appear due to the large volume of the belt. Spacecraft have successfully navigated through this space without collision due to the substantial distance, in the realm of millions of kilometers, between asteroids.

Explanation:

The asteroid belt, primarily located between Mars and Jupiter, appears crowded due to the large quantity of asteroids, over 75% of the known total. But, in reality, the volume of the belt is massive, and these asteroids are not located close to each other. Typically, the distance between objects, even those as small as 1 kilometer in size, is several million kilometers.

As for spacecraft traversing the asteroid belt, although it may seem perilous, it's actually not typically an issue. Spacecraft like Galileo, Cassini, Rosetta, and New Horizons have successfully traveled through the asteroid belt without any collisions. Pioneer missions by NASA have also navigated through the belt without any significant incident, proving that it's achievable.

In reality, despite the large number of celestial objects in the asteroid belt, there is far more empty space than asteroids. This vast space between asteroids has facilitated space missions effectively without much risk of collision.

Learn more about Asteroid Belt and Spacecraft Travel here:

https://brainly.com/question/10049508

#SPJ3

[tex]what is a jule in physics[/tex]

Answers

A joule is equal to the energy used to accelerate a body with a mass on one kilogram using one newton of force over a distance of one meter.

How much heat (in kj) is required to warm 11.0 g of ice, initially at -13.0 ∘c, to steam at 111.0 ∘c? the heat capacity of ice is 2.09 j/g⋅∘c and that of steam is 2.01 j/g⋅∘c?

Answers

Heating ice from -13°C to 0°C
Q1 = mCΔT = 11*2.09*(0--13) = 11*2.09*13 = 298.87 J

Melting ice at 0°C, with latent heat of fusion being 333 J/g
Q2 = mC = 11*333 = 3663 J

Heating water from 0°C to 100°C, with specific heat of water being 4.184 J/g.°C
Q3 = mCΔT = 11*4.184*100 = 4602.4 J

Vaporizing water at 100°C with latent heat of vaporization being 2230 J/g
Q4 = mC = 11*2230 = 24530 J

Heating steam from 100°C to 111°C
Q5 = mCΔT = 11*2.01*(111-100) = 243.21 J

Total heat required, Q =Q1+Q2+Q3+Q4+Q5 = 298.87+3663+4602.4+24530+243.21 = 33337.48 J ≈ 33.34 kJ

Answer:

The total heat required will be 33.35 KJ.

Explanation:

In this question there are two kinds of processes.

1) Heat required for change in temperate = mC∆T

2) Heat required for state change = mass × heat of fusion or latent heat of vaporization

We need some other constants to solve this question.

Heat of fusion of water = 334 J/g

Latent heat of vaporization = 2230 J/g

Specific heat of water = 4.184 J/g0C  

Heat required to change temperature from -13 to 0 degree centigrade

                                Q1 = (11)(2.09)(13) = 298.87 J

Heat required in converting ice to water at 0 degree centigrade

                                Q2 = (11)(334) = 3674 J

Heat required to change temperature from 0 to 100 degree centigrade

                                Q3 = (11)(4.184)(100) = 4602.4 J

Heat required in converting water to water vapors at 100 degree centigrade                  

                                 Q4 = (11)(2230) = 24530 J

Heat required to change temperature from 100 to 111 degree centigrade

                                  Q5 = (11)(2.01)(11) = 243.21 J

Total heat required will be:

                                  Q = Q1 + Q2 + Q3 + Q4 + Q5

                         Q  = 298.87 + 3674 + 4602.4 + 24530 + 243.21 = 33348.48 J

                                   Q = 33.35 KJ

The orbit of the planets in our solar system is generally due to which characteristic of the Sun?
A) the Sun's large volume
B) the majority of the Sun is hydrogen
C) the Sun's strong gravitational field
D) the surface temperatures of the Sun are high

Answers

The answer to your question is C.  the Sun's strong gravitational field . This is correct because i took the test :D

A 50kg child on a skateboard experiences a 75n force as shown what is the expected acceleration of the child?

Answers

A 50kg child on a skateboard experiences a 75n force, the expected acceleration of the child  is 1.5 meters/second squared
Using the formula: F=ma where:
F = Force in Newtons (75n)
m = mass in kilograms (50 kg)
a = acceleration in meters/second squared

F-ma
a = F/m
a = 75 / 50 = 1.5 meters/second squared

The acceleration of the 50kg child on a skateboard experiencing a 75N force can be calculated using Newton's second law of motion (F=ma). Plugging the given values into this equation, we get an expected acceleration of 1.5 m/s².

To calculate the expected acceleration of the child on the skateboard experiencing a 75N external force, we can employ Newton's second law of motion, which states that the acceleration of an object is equal to the net force acting on it divided by its mass (a = F/m).

In this case, the force (F) is 75N and the mass (m) of the child is 50kg.

Now by simply plugging the values into the equation we get a = 75N / 50kg = 1.5 m/s².

So, the expected acceleration of the child on the skateboard, given a force of 75N, is 1.5 m/s².

This result assumes no other forces are involved (like friction) and the force is applied in the direction of motion.

Learn more about Newton's Second Law here:

https://brainly.com/question/13447525

#SPJ6

A system has 410 J of potential energy and 80 J of kinetic energy. Then 90 J of the potential energy is converted into kinetic energy. How much work was done on the system?

Answers

90 J is your answer my good sir

Covalent bonds form because most atoms seek to have how many electrons in their outermost shell?

1
8
4
3

Answers

The answer is 8. 

The innermost shell can only hold 2 electrons, but the second shell (and other shells afterward) can hold 8 or more (depending on the level). 

Covalent bonds form because most atoms seek to have eight electrons in their outermost shell

What is a Covalent bond?

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them.

The octet rule is a general principle that states that atoms tend to gain, lose, or share electrons in order to achieve a stable configuration with a full outermost shell of 8 electrons (or 2 electrons in the case of hydrogen and helium). This is because a full outermost shell gives the atom greater stability and a lower energy state.

Atoms can achieve a full outermost shell through the formation of covalent bonds, in which two or more atoms share pairs of electrons to fill their outermost shells.

Most atoms seek to have 8 electrons in their outermost shell, which is also known as the octet rule.

Learn more about covalent bonds here:

https://brainly.com/question/10777799

#SPJ6

which best describes cosmic microwave background radiation

Answers

The cosmic microwave background (CMB) is electromagnetic radiation as a remnant from an early stage of the universe in Big Bang cosmology. In older literature, the CMB is also variously known as cosmic microwave background radiation (CMBR) or "relic radiation"

Answer:

radiation from the big bang

Explanation:

3. Predict which of the following ions would be likely to form: _____ a. Na2+ _____ b. Cl+ _____ c. Ca2+ _____ d. Br– _____ e. Ne– _____ f. Ne+

Answers

The answer is :  Ca2+ &  Br. 
Na2 would not give away 2 electrons.
Cl would not give away any electron
Ne- & Ne+ are noble gases, so, they do not give up or take electrons.

Explanation:

Ions are the species which form when a neutral atom either loses or gain an electron.

Atomic number of sodium is 11 and it is able to lose only one electron to attain stability. Hence, it will always form [tex]Na^{+}[/tex] ion.

Atomic number of chlorine is 17 and being a non-metal it needs an electron to completely fill its octet. Hence, a neutral atom of Cl by gaining an electron change into [tex]Cl^{-}[/tex] ion.

Atomic number of calcium is 20 and it needs to lose two electrons to become stable in nature. Hence, it will become a [tex]Ca^{2+}[/tex] ion.

Atomic number of bromine is 35 and it being a non-metal it needs an electron to completely fill its octet. Hence, a neutral atom of Br by gaining an electron change into [tex]Br^{-}[/tex] ion.

Atomic number of neon is 10 and it has completely filled octet. So, it neither needs to gain or lose an electron.

Hence, neon atom will remain neutral in nature.

Thus, we can conclude that out of the given options only [tex]Ca^{2+}[/tex] and [tex]Br^{-}[/tex] ions would be likely to form.

Which listed property of alternating current is the MOST LIKELY reason it was chosen over direct current to provide electricity across the country?

Answers

The answer is The ability to carry power across long distances.  The movement of electrical current is constantly reversing direction.AC current reverses direction 60 times per second. It is very easy to adjust the voltage of AC using a device known as a transformer. Power companies can transmit power at extremely high voltage levels and then transform the voltage down to 120 volts inside the house. The ability to carry power across long distances was the most important advantage of AC over DC.

Answer:

d

Explanation:

can be transformed to different voltages

What causes convection in the Earth's mantle layer?

Answers

The mantle is heated in the core, where it is hotter it is more buoyant, whereas in areas where it is cooler it is less buoyant. This results inconvection cells in the mantle, and produces horizontal motion of mantle material close to the Earth surface.

Newton's Second Law of Motion states

A) for every action there is an equal and opposite reaction

B) a body will remain at rest unless acted upon by an unbalanced force

C) a body will move with uniform motion in a straight line, unless acted upon by an unbalanced force

D) the force acting on a body equals the rate of change of momentum

Answers

The answer is A. for every action there is an equal and opposite reaction
Newton's Second Law of Motion states for every action there is an equal/opposite reactions. Incorrect answer is b, c, and d. Correct answer is a. 
Hope it helped you.
-Charlie

Within visible light, violet has the lowest frequency.
a. True
b. False

Answers

false it has the highest frequency

what are 2 ways electromagnets are used

Answers

Electromagnets are used for various purposes but I fathom in this instance, the questioner is asking about how electromagnetics can be used to attraction or repulsion.
Example, electromagnets are used for attraction in cranes which attach them to containers in order to lift them.
Meanwhile, Maglev trains use electromagnets repulsive properties.

What does the second law of thermodynamics say about entropy apex?

Answers

The Second Law of Thermodynamics specifies that in a spontaneous process, entropy either increases or remains constant, but never decreases, emphasizing the irreversible nature of physical processes. It also inherently defines heat transfer directionality, where heat flows from higher to lower temperatures, ultimately increasing entropy.

The Second Law of Thermodynamics asserts that the total entropy of a system in a spontaneous process either increases or remains the same; it does not decrease. In practical terms, this law shows that energy in the form of heat naturally flows from objects at a higher temperature to those at a lower temperature, contributing to an overall increase in entropy. This is because the quantity (Δ S = Q/T) reveals a higher change in entropy at lower temperatures. Thus, while the entropy of the hotter body decreases, the colder body experiences a greater increase in entropy, resulting in a net increase in the entropy of the system.

The second law is closely related to the concept of entropy itself. Entropy is a measure of disorder or randomness in a system, and by stating that entropy tends to increase, the Second Law acknowledges the irreversible nature of real-world processes. Although energy is conserved according to the First Law of Thermodynamics, entropy is not, signifying a fundamental difference in how these quantities behave in thermodynamics.

Implications at Absolute Zero

As for the behaviour of entropy at very low temperatures approaching zero (T→ 0), the second law does not specifically address this scenario, making it one of the interesting unanswered questions in thermodynamics.

The second law of thermodynamics states that the total entropy of a system either increases or remains constant in any spontaneous process; it never decreases. This means that heat transfers energy spontaneously from higher- to lower-temperature objects.

The second law of thermodynamics states that the total entropy of a system either increases or remains constant in any spontaneous process; it never decreases.

This implies that heat transfers energy spontaneously from higher- to lower-temperature objects, but never spontaneously in the reverse direction.In mathematical terms, for any reversible process, the change in entropy (ΔS) is given by ΔS = Q/T, where Q is the heat added to the system and T is the temperature. An important consequence of this law is that the entropy of the universe always increases over time, or remains constant in ideal cases where the system is in a steady state or is undergoing a reversible process.For example, when you place a hot object in contact with a cold one, heat will flow from the hot object to the cold one, increasing the total entropy of the system. The decrease in entropy of the hot object is less than the increase in entropy of the cold object, resulting in a net increase in entropy.

Thus, the second law of thermodynamics fundamentally outlines the direction of spontaneous processes and the inevitable increase in entropy, representing disorder or randomness, in isolated systems.

The potential difference in a simple circuit is 2 v and the resistance is 2 ω . what current flows in the circuit? answer in units of
a.

Answers

Hey

Potential Difference given is : 2V

Resistance is : 2 ohms

By Ohm's Law, one can easily utilize the relation :

[tex]v = ir[/tex]

Where, { v , i , r } are the potential difference, current and Resistance Respectively.


Hence,
[tex]i = \frac{v}{r} = \frac{2}{2} = 1a[/tex]

Hence, the Current is 1 Ampere

What is big and green with horns and jumps high?

Answers

the answer would be a frog!

Answer:

Bullfrog

Explanation:

There is a species of frogs generally found in America known as Bullfrog. Bullfrog has horns. These types of frogs are very big and they can jump very high.

Thus, answer is Bullfrog.

Heat of Fusion How much thermal energy is needed change 50.0 g of ice at -20.0°C to water at 10.0°C?

Answers

We should divide the problem into 3 separate processes.

1) Bring the temperature of the ice from [tex]-20.0^{\circ}C[/tex] to its melting point ([tex]0^{\circ}C[/tex]): the amount of heat needed in this process is
[tex]Q_1=mC_s \Delta T[/tex]
where
[tex]m=50.0 g[/tex] is the mass of the ice
[tex]C_s = 2.108 J/g^{\circ}C[/tex] is the specific heat capacity of ice
[tex]\Delta T=0^{\circ}C-(-20^{\circ}C)=20^{\circ}C[/tex] is the increase of temperature

Plugging numbers into the equation, we find
[tex]Q_1 = (50.0 g)(2.108 J/g^{\circ}C)(20^{\circ}C)=2108 J[/tex]

2) Fusion of ice
When the ice is at melting point, we need to add a certain amount of heat in order to melt it, and this amount of it is given by:
[tex]Q_2 = mL_f[/tex]
where 
[tex]m=50.0 g[/tex] is the mass of ice
[tex]L_f = 334 J/g[/tex] is the latent heat of fusion of ice

Plugging numbers into the equation, we find
[tex]Q_2 = mL_f = (50.0g)(334 J/g)=16700 J[/tex]
During this phase transition, the temperature of the ice/water does not change.

3) Bring the temperature of the water from [tex]0^{\circ}C [/tex] to [tex]10^{\circ}C[/tex]

The amount of heat needed for this process is
[tex]Q_3 = mC_s \Delta T[/tex]
where
[tex]m=50.0 g[/tex] is the mass of water
[tex]C_s = 4.187 J/g^{\circ}C[/tex] is the specific heat capacity of water
[tex]\Delta T=10^{\circ}C-0^{\circ}C=10^{\circ}C[/tex] is the increase of temperature

Plugging numbers into the equation, we find
[tex]Q_3 = (50.0 g)(4.187 J/g^{\circ}C)(10.0^{\circ}C)=2094 J[/tex]


--> therefore, the total energy needed for the whole process is:
[tex]Q=Q_1+Q_2+Q_3=2108 J+16700 J+2094 J=20902 J=20.9 kJ[/tex]

A 10.0 gram moving at 400.0 m/s is brought to a stop in 3.00 cm in a block of wood. Find the force on the bullet, assuming that it is constant.

Answers

The work done to stop the bullet is equal to the variation of kinetic energy of the bullet:
[tex]W=K_f - K_i[/tex]
where Kf is the final kinetic energy of the bullet, while Ki is the initial kinetic energy.
The final kinetic energy is zero (because the final velocity of the bullet is zero), while its initial kinetic energy is
[tex]K_i = \frac{1}{2}mv_i^2 = \frac{1}{2}(0.010 kg)(400.0 m/s)^2 =800 J [/tex]
So, the work done to stop the bullet is
[tex]W=-K_i = -800 J[/tex]
with a negative sign because the direction of the force applied by the block of wood is opposite to the direction of motion of the bullet.

Now, we know that the work is the product between the force F and the distance d:
[tex]W=Fd[/tex]
Therefore, if we re-arrange the formula and we use d=3.00 cm=0.03 m, we can find the intensity of the force (neglecting the sign of the work):
[tex]F= \frac{W}{d}= \frac{800 J}{0.03 m}=2.67 \cdot 10^4 N[/tex]

How can you magnetize an item that is ferromagnetic?
heat it
spin it
rub it with a soft cloth
place it in a magnetic field

Answers

The answer is to place it in a magnetic field. Using an existing magnet, you can magnetize everyday household items that contain iron, cobalt or nickel, which are metals that exhibit the property of ferromagnetism. Ferromagnetism is a subatomic property of some metals created by the structure of the electron clouds around the atoms. When the electrons of the metals align in a particular way, the metal produces a magnetic field. 

Answer:

place it in a magnetic field

Explanation

Ferromagnetic materials are made up of small domains which are randomly oriented in it. Due to this random orientation of all domains they do not produce any magnetic field in its surrounding.

When we put ferromagnetic substance in external magnetic field then due to this all small domains in ferromagnetic substance will experience torque and try to align in the direction of external magnetic field.

Due to this alignment of all domains it produce it's own magnetic field in the direction of external magnetic field.

This phenomenon is known as magnetization.

So here correct answer would be

place it in a magnetic field

Type your answers here for questions 1-6.

1.
2.
3.
4.
5.
6.

Answers

1) Pulley
2) Ramp
3) Wedge
4) Screw
5) Wheel and Axle
6) Lever

Here you go!
1. pulley
2. inclined plane (ramp)
3. wedge + lever (axe handle as lever, chisel as wedge)
4. screw
5. wheel and axle
6. lever

Which particle will not be affected by the presence of an electric field? neutron alpha beta+ beta- proton?

Answers

The correct answer is "neutron".

In fact, a particle is affected by an electric field only if it is electrically charged. The neutron is electrically neutral (its charge is zero), so it does not interact with the electric field. Instead, all the other particles (alpha, which consists of 2 protons and 2 neutrons; beta+, consisting of a positron; beta-, consisting of an electron; and proton) are electrically charged, so they are affected by the electric field.

Answer:d

Explanation:test

How does the redshift of distant galaxies best support the big bang theory? It shows that the galaxies are becoming warmer. It shows that the galaxies are becoming larger. It shows that the galaxies are moving farther away. It shows that the galaxies are shrinking in size.

Answers

It shows that galaxies are moving further away

Answer:

It shows that the galaxies are moving farther away.

Explanation:

When light from the galaxies is shifted towards the longer wavelengths, it is called red shift. When light shifts towards the shorter wavelengths, it is called blue shift. Big bang theory states how the primordial universe started expanding from a hot and dense singularity, in the process of evolution of the universe.

The  universe is expanding always. Galaxies that are a part of the universe keep expanding and move farther away from each other. The galaxies that are very far off appear to  move much faster than the nearby galaxies.

Other Questions
You have just purchased a hamburger at toady loady's hamburger stand. you get ready to eat it and notice that the meat is red-almost raw. you take the hamburger back to get a well-cooked hamburger due to your concern about which organism that is commonly associated with undercooked meat? staphlococcus aureus giardia lambia e-coli clostridium botulinum Before speaking or acting, sally examines a situation for cues of how she should react, and then tries to meet the demands of the situation rather than act on her own feelings. she is probably a ________ self-monitor. Which heading would best accommodate a new sub-section titled "Basic Car Repair Information All Road Trippers Should Know"?A.ComfortB.Entertainment C.Vehicle preparationD.Where to go Can someone help me please When the hydroxyl group, like in the image below, is attached to a carbon compound, the organic compound is a(n) A hydrogen atom covalently bonded to an oxygen atom, which is covalently bonded to a carbon in the carbon chain. carboxylic acid. alcohol. ether. ketone. THE RIGHT ANSWER WILL RECIEVE A BRAINLEST AND POINTS!!!if someone has diabetes please help ill add some question s to who has diabetes and please answer them.1.)What was your reaction when you knew that you have diabetes?2.)Did diabetes effect on your life negatively ?3.)How did you feel when your blood/sugar level increased or decreased?4.)How many injections do you get in a day?5.)What struggles did you go through?6.)Do you have a limit amount of food to eat?7.)Do you eat unhealthy food after your know that you have diabetes?8.)What is the highest or lowest blood/sugar level did you reach to?9.)Is there a specific food you need to eat?10.)At which age did you get diabetes?11.)How much is your sugar level usually?12.)When did you find out that you have diabetes? how much would $200 invested at 4% interest compounded monthly be worth after 8 years round your answer to the nearest tenth Which statement will most effectively communicate your refusal Yvette and bobby like each other and have been in many classes together, but don't know each other personally very well. bobby asks yvette to go walking with him one day to a secluded area so that they can talk privately and get to know each other. what should yvette do? The ratio of Monarch butterflies to Queen butterflies at a butterfly farm was 8:5. If there are no additional butterflies at the farm, what is the ratio of Queen butterflies to the total number of butterflies at the farm? What is 40,630 written in scientific notation? The Camp David Accords were agreements brokered by President Carter (center) and involved what two countries (whose leaders are to the President's sides)? A)Israel and Palestine B)Israel and Egypt C)Italy and Libya D)Iran and Iraq Dennis thought of a number. He adds 0.5 to that number and then multiplies the new result by 4. He then subtracts 2 and divides the number by 2. His final answer is 48. What number did Dennis start with? what is the main purpose of the 4th amendment Amy has for gerbils Which Way 20 G 22 G 24 and 26 G what is the total weight of the gerbils in milligrams Suppose it costs $15 to roll a pair of dice. you get paid 2 dollars times the sum of the numbers that appear on the dice. what is the expected payoff of the game? is it a fair game? _____ is the tendency to assume that a person has generally positive or negative traits as a result of observing one major positive or negative trait. La madre de Yolanda la recogi de la escuela a las tres. said goodbye went with picked up chatted simplify. x-2/(x^2+4x-12) how did the division of germany after world war 2 affect the relationship between the soviet union and the united states?