The calculation involves combining the masses after collision, calculating the final velocity using the law of conservation of momentum and then finding the frictional work done. Using the work-energy theorem, we can solve for the coefficient of kinetic friction.
Explanation:The question is asking to find the coefficient of kinetic friction on the rough surface where two blocks m1 and m2 have collided and eventually come to a stop after traveling a certain distance. We first need to combine the mass of both blocks as they stick together and this results in a total mass (m1 + m2 = 3.5 kg + 1.7 kg = 5.2 kg). After collision, we can use the law of conservation of momentum to calculate the final velocity when both blocks stick together (m1*v1 + m2*v2 = (m1 + m2) * v_final).
Substituting known values (3.5 kg * 6.3 m/s + 1.7 kg * 0 m/s = 5.2 kg * v_final), we get v_final = 4.425 m/s.
Now, to find the coefficient of kinetic friction, we will use the equation of work-energy theorem where Workdone by friction = Change in kinetic energy. The work done by frictional force is equal to the force of friction multiplied by the distance, and force of friction equals the coefficient of kinetic friction times the normal force (which is mass times gravity in this case).
Thus, the equation would be: μk * m1 * g * d = ½ * m1 * v1^2 (since the final velocity is zero). Substituting the known values into this equation, we can solve to find the coefficient μk.
Learn more about Coefficient of kinetic friction here:https://brainly.com/question/30394536
#SPJ12
Photons of light with an energy of 656 nm are being directed through a chamber of hydrogen gas atoms. the gas atoms began in their ground state (ni=1). what happens?
Since there is not quite enough energy for transition from n=1 to n=2. So, the photons will pass through the gas chamber without affecting the gas.
Further explanation:
If the energy of photons is enough to excite all the electrons to go in higher state, the electron absorbs the energy of photon and go from a lower energy state to higher energy state. Transition of electron from lower energy state t higher energy state depends on the energy of photons.
Given:
The wavelength of the photons directed through a chamber of hydrogen gas atoms is [tex]656\text{ nm}[/tex].
The electron is excited from the energy state [tex]n=1[/tex] to higher energy state.
Concept:
The energy associated with a photon is given by the following relation.
[tex]E = \dfrac{{hc}}{\lambda}[/tex]
Here, [tex]E[/tex] is the energy associated with photon, [tex]h[/tex] is the plank constant, [tex]c[/tex] is the speed of the light and [tex]\lambda[/tex] is the wavelength associated with photon.
Substitute [tex]6.625\times{10^{-34}}\text{ J}\cdot\text{s}[/tex] for [tex]h[/tex], [tex]3.00\times{10^8}\text{ m/s}}[/tex] for [tex]c[/tex] and [tex]656\text{ nm}[/tex] for [tex]\lambda[/tex] in the above expression.
[tex]\begin{aligned}E&=\frac{{\left( {6.625 \times {{10}^{ - 34}}\,{\text{Js}}} \right)\left( {3.0 \times {{10}^8}\,{\text{m/s}}} \right)}}{{\left( {656 \times {{10}^{ - 9}}\,{\text{m}}} \right)}}\\&=3.0281 \times {10^{-19}}\,{\text{J}}\\\end{aligned}[/tex]
Rydberg equations is used to find out the energy level of an electron while transition from one energy state to another energy state.
[tex]\dfrac{1}{\lambda}=R{z^2}\left({\dfrac{1}{{n_1^2}}-\dfrac{1}{{n_2^2}}}\right)[/tex]
Here, [tex]\lambda[/tex] is the wavelength of the photons directed through a chamber, [tex]R[/tex] is the Rydberg constant, [tex]z[/tex] is the atomic number of hydrogen atom, [tex]{n_1}[/tex] is the lower energy state and [tex]{n_2}[/tex] is the higher energy state.
Substitute [tex]656\times{10^{-9}}\,{\text{m}}[/tex] for [tex]\lambda[/tex], [tex]1.0973 \times {10^7}\,{{\text{m}}^{{\text{-1}}}}[/tex] for [tex]R[/tex], [tex]1[/tex] for [tex]z[/tex] and [tex]1[/tex] for [tex]{n_1}[/tex] in the above expression.
[tex]\dfrac{1}{{\left( {656 \times {{10}^{ - 9}}\,{\text{m}}} \right)}} = \left( {1.0973 \times {{10}^7}{\mkern 1mu} {{\text{m}}^{{\text{-1}}}}} \right){\left( 1 \right)^2}\left( {\dfrac{1}{{{{\left( 1 \right)}^2}}}-\dfrac{1}{{n_2^2}}}\right)[/tex]
Simplify the above expression for [tex]{n_2}[/tex]
[tex]\begin{aligned}{n_2}&=\sqrt{\dfrac{1}{{0.861}}}\\&=1.08\\\end{aligned}[/tex]
From the above result it can be concluded that photons with wavelength [tex]656\text{ nm}[/tex] does not have enough energy to cause an electron to jump even one level higher.
Thus, there is not quite enough energy for transition from n=1 to n=2. So, the photons will pass through the gas chamber without affecting the gas.
Learn more:
1. A Na+ ion moves from inside a cell https://brainly.com/question/9251988
2. The kinetic energy of the emitted electrons when cesium is exposed to UV rays https://brainly.com/question/9059731
3. The frequency of the light for wavelength 7.1x10^2 nm https://brainly.com/question/9559140
Answer Details:
Grade: College
Subject: Physics
Chapter: Modern physics
Keywords:
Photons, light, energy, 656 nm, 656 times 10^-9 m, 6.56 times 10^-7 m, directed, chamber, hydrogen, gas atom, ground state, ni=1, 1.071, few, absorbed, quite enough, electrons, nf=2.
Final answer:
When photons with an energy of 656 nm pass through a chamber of hydrogen gas, the gas atoms can absorb these photons, causing the electrons to transition to higher energy levels.
Explanation:
When photons of light with an energy of 656 nm pass through a chamber of hydrogen gas atoms, the gas atoms can absorb photons that have the exact energy required to raise an electron from one energy level to another. In this case, the 656 nm photons have just the right energy to raise an electron in a hydrogen atom from the second to the third orbit.
When the hydrogen atoms absorb the 656 nm photons, the electrons that were initially in the second energy level will move to the third energy level, resulting in a number of missing photons of this wavelength and energy from the general stream of light passing through the gas. This phenomenon is known as absorption.
In summary, when photons with an energy of 656 nm pass through a chamber of hydrogen gas, the hydrogen gas atoms can absorb these photons, causing the electrons to transition to higher energy levels.
A monatomic ideal gas expands slowly to twice its original volume, doing 280 j of work in the process. find the heat added to the gas if the process is isothermal.
A hydrogen electron returns from energy level n = 3 to n = 1 during electron transition. What will the spectral lines emitted by this electron look like under a spectroscope? dark line spectrum white light continuous spectrum bright line spectrum
Answer:
when electron jump from n=3 to n=1 then the photon coming out is of Lyman series. Here Lyman series photon is also known as Ultraviolet range of photon
Explanation:
As per Bohr's theory we know that when electron make transition from higher energy level to lower energy level then it emits photons of different energy range.
Here we know that when electron makes transition from any higher level to n=1 then it is ultraviolet range of photons.
While if electron makes transition from any higher energy range to n= 2 then it is visible range of photons
and for any higher energy level to n=3 then it is infrared range of photon
So here the spectrum received in this case is of ultraviolet range
A 9.00-g bullet is fired horizontally into a 1.20-kg wooden block resting on a horizontal surface. the coefficient of kinetic friction between block and surface is 0.20. the bullet remains embedded in the block, which is observed to slide 0.340 m along the surface before stopping. part a what was the initial speed of the bullet? express your answer with the appropriate units.
To find the initial speed of the bullet, we can use the conservation of linear momentum. By applying the conservation of momentum equation, we can solve for the initial velocity of the bullet. In this case, the initial velocity of the bullet is found to be 0 m/s.
Explanation:To find the initial speed of the bullet, we need to consider the conservation of linear momentum. The initial momentum of the bullet is equal to the final momentum of the bullet and the block together.
The momentum of an object is given by the product of its mass and velocity. The bullet has a mass of 9.00 g and its velocity is the initial speed we want to find. The block has a mass of 1.20 kg and its velocity is 0 m/s initially.
Applying the conservation of momentum, we have: (mass of bullet) × (initial velocity of bullet) = (mass of bullet + mass of block) × (final velocity of bullet + block).
Since the bullet remains embedded in the block, the final velocity of the bullet and block together is 0 m/s. Plugging in the values, we can solve for the initial velocity of the bullet.
9.00 g × (initial velocity of bullet) = (9.00 g + 1.20 kg) × 0
(initial velocity of bullet) = 0 / (10.2 g)
(initial velocity of bullet) = 0 m/s
Express 4,560 m in km. Remember to keep the same number of significant figures in your answer as was in the original measurement.
Answer:
4.56 km.
Explanation:
Blessings.
Which layer of the sun is responsible for producing the light shown in the picture above?
Radiative zone
Convective zone
Photosphere
Chromosphere
Answer:
C. Photosphere
Explanation:
The lights shown in the figure comes from the outermost layer of the Sun. This layer is called photosphere.
This is the layer from where the light of the Sun is radiated, before travelling through space and reaching us.
The photosphere is the coldest layer of the Sun: its surface temperature is between 4500 and 6000 K. Its width is approximately 100 km.
A characteristic of the photosphere is the presence of the sunspots, which appear as darker spots, and are regions of lower temperature caused by a concentration of magnetic flux.
The correct option is Option C( Photosphere).The photosphere is the layer of the sun responsible for producing the visible light we see. It has a temperature range of 4500 K to 6800 K. The photosphere is the sun's visible surface.
The layer of the sun responsible for producing the light that we see is the photosphere. The photosphere is the visible surface of the sun and has a temperature that ranges from 4500 K to about 6800 K. It is where the light that we see directly is emitted. Above the photosphere are other layers such as the chromosphere and the corona, but it is the photosphere that generates the light.A microwave oven operates at 2.70 ghz . what is the wavelength of the radiation produced by this appliance? express the wavelength numerically in nanometers.
The wavelength of the microwave radiation produced by microwave oven is [tex]\boxed{1.1\times {10^8}\,{\text{nm}}}[/tex].
Further Explanation:
A microwave is an appliance which is used to heat and cook food by direct exposing it to electromagnetic radiation. Microwave oven uses radio waves to heat and cook food. A magnetron is used as a source of microwave radiation.
The radiation travels with the speed of light inside the microwave oven.
Given:
The operational frequency of the microwave oven is [tex]2.70\text{ GHz}[/tex].
The speed of the radiation is [tex]3\times10^{8}\text{ m/s}[/tex].
Concept:
The frequency and wavelength of an electromagnetic radiation are related according to the following expression.
[tex]c=f \cdot \,\lambda[/tex]
Rearrange the above expression for [tex]\lambda[/tex] .
[tex]\boxed{\lambda=\dfrac{c}{f}}[/tex] …… (1)
Here, [tex]c[/tex] is the speed of light, [tex]f[/tex] is the frequency of the radiation and [tex]\lambda[/tex] is the wavelength of the radiation.
Converting [tex]\text{GHz}[/tex] into [tex]\text{Hz}[/tex].
[tex]2.70\,{\text{GHz=2}}{\text{.70}} \times {\text{1}}{{\text{0}}^9}\,{\text{Hz}}[/tex]
Substitute [tex]3.00 \times {10^8}\,{\text{m/s}}[/tex] for [tex]c[/tex] and [tex]2.70 \times {10^9}\,{\text{Hz}}[/tex] for [tex]f[/tex] in equation (1).
[tex]\begin{aligned}\lambda&=\frac{{3.00 \times {{10}^8}\,{\text{m/s}}}}{{2.70 \times {{10}^9}\,{\text{Hz}}}} \\&=0.11\,{\text{m}} \\&=1.1\times10^{8}\text{ nm} \\ \end{aligned}[/tex]
Thus, the wavelength of the microwave radiation produced by microwave oven is [tex]\boxed{1.1\times {10^8}\,{\text{nm}}}[/tex].
Learn more:
1. Rotational velocity https://brainly.com/question/2887706
2. Current through the inductor https://brainly.com/question/1695461
3. Force applied by car on truck https://brainly.com/question/2235246
Answer Details:
Grade: High school
Subject: Physics
Chapter: Electromagnetic radiation
Keywords:
Microwave oven, 2.70 GHz, 2.70 ghz, 2.70 times 10^9 Hz, wavelength, numerically, nanometers, 0.11 m, 0.11 times 10^9 nm, 1.1 times 10^8 nm , magnetron, 0.11 times 10power9 nm, 1.1 times 10 power 8 nm.
The wavelength of the radiation produced by the microwave oven is approximately 111,111,111 nanometers.
To find the wavelength of the radiation produced by a microwave oven operating at 2.70 GHz, you can use the formula:
Wavelength (λ) = Speed of Light (c) / Frequency (f)
Where:
Speed of Light (c) = 3 x [tex]10^8[/tex] meters per second (approximately)
Frequency (f) = 2.70 GHz = 2.70 x [tex]10^9[/tex] Hertz
Now, plug these values into the formula:
λ = (3 x [tex]10^8[/tex] m/s) / (2.70 x [tex]10^9[/tex] Hz)
λ = 0.1111 meters.
To express this wavelength in nanometers, you can convert meters to nanometers. There are 1 billion nanometers in a meter, so:
λ ≈ 0.1111 meters * 1,000,000,000 nanometers/meter ≈ 111,111,111.11 nanometers
Hence , The wavelength of the radiation produced by the microwave oven is approximately 111,111,111 nanometers.
To know more about wavelength here
https://brainly.com/question/4844737
#SPJ3
a system that uses reflected radio waves to detect objects and to measure their distance and speed is called
An ideal gas in a sealed container has an initial volume of 2.30 l. at constant pressure, it is cooled to 24.00 °c where its final volume is 1.75 l. what was the initial temperature?
Considering the Charles' law, the initial temperature was 390.34 K or 117.34 °C.
Definition of Charles's Law
Charles's Law consists of the relationship that exists between the volume and temperature of a certain amount of ideal gas, which is maintained at a constant pressure, by means of a proportionality constant that is applied directly. For a given amount of gas at a constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases because the temperature is directly related to the energy of the movement of the gas molecules. .
In summary, Charles's law is a law that says that when the amount of gas and pressure remain constant, the ratio between volume and temperature will always have the same value:
V÷T=k
Analyzing an initial state 1 and a final state 2, the following is true:
V₁÷T₁=V₂÷T₂
Initial temperature
In this case, you know:
V₁= 2.30 LT₁= ?V₂= 1.75 LT₂= 24 °C= 297 K (being 0°C= 273 K)Replacing in Charles' law:
2.30 L÷T₁= 1.75 L÷297 K
Solving:
2.30 L= (1.75 L÷297 K)× T₁
2.30 L÷ (1.75 L÷297 K)= T₁
390.34 K= 117.34 °C= T₁
Finally, the initial temperature was 390.34 K or 117.34 °C.
Describe a situation in which different units of measure could cause confusion.
Answer:
When different countries use different forms of measurement there is many different mistakes and confusion that can happen.
Explanation:
Final answer:
Different units of measure can cause confusion and serious mishaps in critical fields like medicine and aviation. Unit conversion is essential for clear communication, with dimensional analysis being a key tool for accurate conversions. Appropriate units must be used in context to avoid misunderstandings.
Explanation:
Different units of measure can lead to confusion, miscommunication, and even dangerous situations if not properly managed. This is particularly true in fields where precise measurements are critical, such as medicine, engineering, and aviation.
One famous example is the loss of the Mars Climate Orbiter spacecraft in 1999 due to the use of English units in the software while engineers used metric units for its development. Similarly, in 1983, an Air Canada plane ran out of fuel and had to make an emergency landing because the fuel tanks were filled using pounds instead of kilograms. Even in daily life, incorrect unit conversion can be problematic, such as when dispensing medication and precise dosages are required for safety.
To avoid such missteps, unit conversion is necessary. By converting units, we effectively communicate the same quantity in different terms. For example, 12 inches can also be expressed as 1 foot, but both units describe the identical length. Understanding dimensional analysis is key to accurate conversion and communication of measurements.
When selecting appropriate units, context is important to convey measurements accurately. The distance between two towns is best measured in kilometers or miles, the weight of a peanut in grams, the length of a hand in centimeters, and the volume of a raindrop in milliliters. Using the correct units ensures clarity and avoids confusion.
Consider a well-insulated horizontal rigid cylinder that is divided into two compartments by a piston that is free to move but does not allow either gas to leak into the other side. initially, one side of the piston contains 1 m3 of n2 gas at 500 kpa and 120°c while the other side contains 1 m3 of he gas at 500 kpa and 40°c. now thermal equilibrium is established in the cylinder as a result of heat transfer through the piston. using constant specific heats at room temperature, determine the final equilibrium temperature in the cylinder. what would your answer be if the piston were not free to move
Which of the following statements best describes the labor market in the field of healthcare?
Answer:
b
Explanation:
A horse does 910 J of work in 380 seconds while pulling a wagon. What is the power output of the horse? Round your answer to two significant figures. The power output of the horse is W.
Final answer:
The power output of the horse is calculated by dividing the work done by the time taken. With 910 joules of work done in 380 seconds, the power output is approximately 2.4 watts after rounding to two significant figures.
Explanation:
To calculate the power output of the horse, you can use the formula for power, which is work divided by time.
Power (P) = Work (W) / Time (T)
Given the information, the horse does 910 joules (J) of work in 380 seconds. Using the formula:
P = 910 J / 380 s ≈ 2.395 W
Rounded to two significant figures, the power output of the horse is approximately 2.4 watts (W).
It comes out to be approximately 2.394736842 W, which is rounded to 2.4 W to two significant figures. The power output of the horse is calculated by dividing the work done by the time taken.
Explanation:To calculate the power output of the horse, we use the formula for power (P), which is P = Work done (W) / Time taken (t).
The horse does 910 J of work in 380 seconds.
Therefore, the power output P is:
P = 910 J / 380 s = 2.394736842 J/s
Since 1 watt (W) is equivalent to 1 joule per second (J/s), the power output of the horse is approximately:
P = 2.394736842 W
Rounded to two significant figures, the power output of the horse is 2.4 W.
Why is temperature a good criterion for searching for Earthlike exoplanets?
Answer:
Liquid water is essential for life to exist. Water can occur in a liquid state only within a specific temperature range, so knowing the temperature range on a planet will help astronomers predict whether life exists on that planet.
Explanation:
Final answer:
Temperature is a critical criterion for finding Earthlike exoplanets because it determines the presence of liquid water, a requirement for life. The greenhouse effect of a planet's atmosphere can greatly influence its surface temperature, making it crucial to find planets within their star's habitable zone where conditions allow for liquid water.
Explanation:
Temperature is an excellent criterion for searching for Earthlike exoplanets because it is a fundamental factor that determines a planet's habitability. The presence of liquid water is crucial for life as we know it and water exists in liquid form within a specific temperature range - not too hot, not too cold, but “just right”. Planets with surface temperatures between the freezing and boiling points of water, such as Earth, are rare and special because they may house environments where life can thrive. Furthermore, a planet's temperature is deeply influenced by its atmosphere through the greenhouse effect, which can significantly modify surface conditions. Earth's atmosphere keeps it warm enough to sustain life, while Venus, with its thick carbon dioxide atmosphere, is much hotter, and Mars, with a very thin atmosphere, is much colder.
Astronomers have therefore determined that looking for exoplanets within the habitable zone of their star - where temperature conditions are favorable for liquid water - is essential in the quest to find life. This involves analyzing various attributes of exoplanets, including their size and distance from their star, as well as the atmospheric composition, which can alter temperature conditions beyond the expectations set by distance alone. So, temperature serves as a proxy for a multitude of critical conditions that collectively determine the possibility of life on other planets.
A circuit consists of a 9.0 v battery connected to three resistors (37 , 17 , and 110 ) in series. (a) find the current that flows through the battery. ma (b) find the potential difference across each resistor. v37 = v v17 = v v110 = v
A 2.00-kg metal object requires 1.00 × 104 J of heat to raise its temperature from 20.0 °C to 60.0 °C. What is the specific heat of the metal?
Answer:
0.125 J/(g·k)
Explanation:
Specific heat has units of J/(g·K), so we find the value by dividing the energy by the product of mass and temperature change.
(10^4 J)/(2·10^3 g·(60 -20)K) = 10/(2·40) J/(g·K) = 0.125 J/(g·k)
Two brothers are sitting on a wide bench on a carnival carousel. Aiden sits at a distance R away from the center of the carousel. Daniel sits at a distance 0.75R away from the center after the carousel begins moving in uniform circular motion, what is the ratio of Daniels centripetal acceleration to aidens centripetal acceleration?
A. 3:4
B. 1:1
C. 9:16
D. 4:1
Explain what is meant by the term mechanical advantage.
:Levers are tools that allow a small effort to move significantly larger loads. This apparent magnification of the force applied to a lever, and the force resulting from it, is called its mechanical advantage.
The term mechanical advantage is used to described how effectively a simple machine works. Mechanical advantage is defined as the resistance force moved divided by the effort force used. In the lever example above, for example, a person pushing with a force of 30 lb (13.5 kg) was able to move an object that weighed 180 lb (81 kg). So the mechanical advantage of the lever in that example was 180 lb divided by 30 lb, or 6. The mechanical advantage described here is really the theoretical mechanical advantage of a machine. In actual practice, the mechanical advantage is always less than what a person might calculate. The main reason for this difference is resistance. When a person does work with a machine, there is always some resistance to that work. For example, you can calculate the theoretical mechanical advantage of a screw (a kind of simple machine) that is being forced into a piece of wood by a screwdriver. The actual mechanical advantage is much less than what is calculated because friction must be overcome in driving the screw into the wood.
Sometimes the mechanical advantage of a machine is less than one. That is, a person has to put in more force than the machine can move. Class three levers are examples of such machines. A person exerts more force on a class three lever than the lever can move. The purpose of a class three lever, therefore, is not to magnify the amount of force that can be moved, but to magnify the distance the force is being moved. As an example of this kind of lever, imagine a person who is fishing with a long fishing rod. The person will exert a much larger force to take a fish out of the water than the fish itself weighs. The advantage of the fishing pole, however, is that it moves the fish a large distance, from the water to the boat or the shore.
Which scientists contributed to discovering the universal law of gravitation? Check all that apply. Tycho Brahe Albert Einstein Johannes Kepler Nicolaus Copernicus Sir Isaac Newton Robert Hooke
Tycho Brahe
Johannes Kepler
Nicolaus Copernicus
Sir Isaac Newton
Robert Hooke
The scientists contributed to discovering the universal law of gravitation are Tycho Brahe, Johannes Kepler , Nicolaus Copernicus , Sir Isaac Newton , and Robert Hooke .
What is science?Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.
A method of learning about the world is science. Science allows people to participate in the creation of new knowledge as well as use that knowledge to further their goals.
Tycho Brahe, Johannes Kepler, Nicolaus Copernicus, Sir Isaac Newton, and Robert Hooke are the scientists who made significant contributions to the discovery of the gravitational constant.
Learn more about the science here , refer to the link given below :
https://brainly.com/question/18186842
#SPJ2
what is rolling friction
Rolling friction is a force resisting motion when an object rolls on a surface. An example could be a ball rolling or a tire.
An example of a radioactive isotope is carbon-12. carbon-14. neon-20. neon-22.
Carbon-14 is an example of a radioactive isotope because this element can emit radioactivity.
What is Radioactivity?
Radioactivity is a property where an element can emit energy and atomic particles in a spontaneous manner.
What is isotope?Isotopes are two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.
To learn more about radioactivity here
https://brainly.com/question/1770619
#SPJ2
Which statement best describes how a wave would move differently through a pot of boiling water than the steam created from it? The wave would move faster through the water than through the steam. The wave would move slower through the water than through the steam. The wave would move the same speed through the water and the steam. The wave would move through the water and steam at the same speed, but decrease in speed at the transition point.
Answer:
The wave would move faster through the water than through the steam
Explanation:
A mechanical wave is a wave that is transmitted through the oscillations of the particles in a medium. The closer the particles in the medium are, the more efficient the transmission of the wave is (because the collisions between the particles are more frequent), and so the faster the wave.
For this reason, mechanical waves travel faster in liquids (such as water) than in gases (such as the steam): because particles in liquids are closer together than in gases, where they are more spread apart. Therefore, the correct choice is
The wave would move faster through the water than through the steam
When you jump vertically off the ground, when you reach your highest point your velocity is zero and your acceleration is zero?
What is the fate of solar radiation that reaches the earth?
When solar radiation reaches the Earth, some parts of it is defused by the atmosphere and some parts transmitted to Earth's surface.
What is the solar radiation?A broad name for the electromagnetic radiation emitted by the sun is solar radiation, also known as the solar resource or just sunshine. With the use of various technologies, solar radiation may be absorbed and converted into usable forms of energy like heat and electricity. However, a certain location's solar resource determines whether these systems are technically feasible and operate economically.
Some of the sunlight is absorbed, scattered, and reflected by air molecules, water vapour, clouds, dust, pollutants, forest fires, and volcanoes as it travels through the atmosphere. The term for this is diffuse sun radiation.
Direct beam solar radiation is the type of solar radiation that directly reaches the surface of the Earth. Global solar radiation is the total of both diffuse and direct sun radiation. Direct beam radiation can be reduced by atmospheric conditions by 10% on clear, dry days and by 100% on days with heavy clouds.
Learn more about solar radiation here:
https://brainly.com/question/16525532
#SPJ5
A 75-g bullet is fired from a rifle having a barrel 0.540 m long. choose the origin to be at the location where the bullet begins to move. then the force (in newtons) exerted by the expanding gas on the bullet is 16000 10000x - 26000x2, where x is in meters. (a) determine the work done by the gas on the bullet as the bullet travels the length of the barrel. (enter your answer to at least two decimal places.) 8.73 kj (b) if the barrel is 0.95 m long, how much work is done
A block with a weight of 3.00 n is at rest on a horizontal surface. a 1.00 n upward force is applied to the block by means of an attached vertical string. collapse question part step 1 how many forces act on the block?
A ____ is a region so dense that nothing, including light, can escape its gravity field.
a. supernova c. black hole b. white dwarf d. supergiant Please select the best answer from the choices provided
Answer:
black hole
Explanation:
A black hole is a region which is highly dense and very high gravitational field.
As the density of black hole is very high, so the mass of black g=hole is very large thus the force of gravitation is very large. So, even light cannot escape from the gravitational filed from the black hole.
Consider a wire that has resistance r, length l and the cross-sectional area
a. the correct expression for the resistivity of that wire is:
Answer:
[tex]\rho = \frac{RA}{L}[/tex]
Explanation:
.As we know that the resistance of the wire is given as
[tex]R = \rho \frac{L}{A}[/tex]
here we know that
A = cross-sectional area
L = length
R = resistance of wire
now multiply both sides of above equation with Area
[tex]R A = \rho L[/tex]
now divide both sides with length of the wire
[tex]\rho = \frac{RA}{L}[/tex]
so above is the expression of resistivity of wire in terms of resistance, Area and length of the wire
A wave has a wavelength of 8 mm and a frequency of 14 Hertz what is its speed?
G davisson and germer performed their experiment with a nickel target for several electron bombarding energies. at what angles would they find diffraction maxima for 48 ev and 60 ev electrons?