Answer: Threat
Explanation:
Threat is one of the type of possible danger occur in the computer system security and also also exploit the security system that cause various types of possible harms.
Threat is alter any type of data in an organization without the permission of the owner.
The threat can be classified into the different types are as follows:
Computer worm DOS attack Rootkit Computer viruses
The digital wallet stores a user’s payment information such as bank account and credit card numbers, a __________ to identify the user, and information that the user provides such as shipping information to speed up Internet transactions.
Answer:
Digital Certificate
Explanation:
Technician A says that replacement pistons can be of different weights from the original pistons. Technician B says that some engines use an offset piston pin to help reduce piston slap when the engine is cold. Who is right?
A) Technician A only
B) Technician B onlyC) Both technicians A and B
D) Neither technician A nor B
Answer:
B) Technician B only
Explanation:
Slap is caused when engine is cold
Piston slap is moves ups and down in the engine block.Air and fuel explodes inside the chamber.Piston is connected to pin.
The Piston can be sufficiently enormous with the goal that the cylinder rocks starting with one side then onto the next to cause the cylinder slap. Aluminum squares will in general effectively capitulate to this issue than others.
Piston that experience increasingly chilly leeway acquire speed when the cylinder moves from the minor to significant push side and this causes the cylinder slap.
Final answer:
Both technicians A and B are correct. Technician A notes that replacement pistons can differ in weight from originals, while Technician B explains that offset piston pins reduce piston slap in cold engines.
Explanation:
The question at hand deals with nuances in engine design and piston assembly. Technician A states that replacement pistons can differ in weight from the original pistons. This is correct because replacement pistons, especially performance types or those made by different manufacturers, can have different weights due to material differences or design. Technician B discusses the use of an offset piston pin, which is a design feature indeed used in some engines to mitigate piston slap during cold start conditions. The offset position changes the thrust angle during the piston's travel, thereby reducing the noise and potential wear associated with piston slap. Hence, the correct answer is C) Both technicians A and B are right.
The variety of theatre introduced in the 1960s that denotes semi-professional or even amateur theatre in the New York/Manhattan area, often in locations such as church basements, YMCAs, and coffeehouses, is commonly known as off-off-Broadway.
a. True.
b. False
Answer:
The answer is letter A. TRUE
Explanation:
The variety of theatre introduced in the 1960s that denotes semi-professional or even amateur theatre in the New York/Manhattan area, often in locations such as church basements, YMCAs, and coffeehouses, is commonly known as off-off-Broadway. This statement is true.
By examining the source and destination addresses, the application usage, the source of origin, and the relationship between current packets with the previous packets of the same session, __________ firewalls are able to grant a broader range of access for authorized users and activities and actively watch for and block unauthorized users and activities.A. Static packet-filteringB. Application-level gatewayC. Stateful inspectionD. Circuit-level gateway
The relationship between current packets with the previous packets of the same session, Stateful inspection firewalls are able to grant a broader range of access for authorized users and activities and actively watch for and block unauthorized users and activities.
C. Stateful inspection
Explanation:
Basically packet filtering handles in gateways level at firewall. As Network administrator he or she keep monitoring the network packet, if any unauthorized user login is found on any session or same session it is consider as high risk.
These shows some illegal access to computer has be executed as immediate action network engineer has to see logs and their activities in firewall either if it invalid transaction immediately he has put filter of ip address or mac address possible.
Network administration he or she update firewall patches at regular intervals.
After Maya gave her friend the password to a protected website, the friend was able to remember it only long enough to type it into the password box. In this instance, the password was clearly stored in her ________ memory.
Answer:
short term
Explanation:
Short-term memory is the capacity for holding, but not manipulating, a small amount of information in mind in an active, readily available state for a short period of time.
For example, after Maya gave her friend the password to a protected website, the friend was able to remember it only long enough to type it into the password box. In this instance, the password was clearly stored in her short term memory.
Answer:
Short-term memory
This is the term for the manual process of editing strips of the film before digital editing was created. The term is still used today for talking about making the most basic transition from one shot to the next.
a. joining
b. lapping
c. cutting
d. tuning
Answer:
c. cutting
Explanation:
There are various types of transitions used in the post-editing of a video or film. One of the main purpose of transition is that how a shot will end and connect with the next upcoming shot.
The most basic transition which is still in use is cut. The cut term is used to start or end of any shot. There are many more purposes of cutting transition in the film and video editing process.
So according to the question, the most appropriate answer is option c.
Gal runs a music store. He has a desktop computer in the back room that acts as a server. He has a point-of-sale terminal that connects to the desktop. He also has a notebook (using in-store wireless access to the Internet) that can be carried around the store to look up current items in stock, or to search for items from one of his suppliers for special orders. The Web site for the store is www.GalsTunes.net. Which of the following is true?
a. Gal must not be selling on his Web site because the top-level domain is a .net and not a .com
b. The notebook computer must be connected to the Internet in order to transfer data to the desktop computer
c. The point-of-sale terminal cannot connect directly to the Internet.
d. The desktop computer must be connected to the Internet since the notebook can access data from it
e. Gal must be hosting his Web site on his own desktop computer based on its URL
Answer:
The answer is letter C. The letter C is the true statement.
Explanation:
The true statement is The point-of-sale terminal cannot connect directly to the Internet.
Write a class definition of a class named Value with the following: a boolean instance variable named modified, initialized to false an int instance variable named val a constructor accepting a single parameter whose value is assigned to the instance variable val a method getVal that returns the current value of the instance variable val a method setVal that accepts a single parameter, assigns its value to val, and sets the modified instance variable to true a boolean method, wasModified that returns true if setVal was ever called.
Answer:
The class definition to this question can be given as:
Class definition:
public class Value //define class value.
{
private boolean modified = false; //define variable modified.
private int val; //define variable.
Value(int i) //parameterized constructor
{
val = i; //holds parameter value.
}
public int getVal() //define method getVal.
{
return val;
}
public void setVal(int i) //define method setVal
{
val = i; //holds parameter value
modified = true; //change boolean variable value.
}
public boolean wasModified() //define method wasModified.
{
return modified; //return value.
}
}
Explanation:
The description of the above class definition as follows:
Firstly we define a class that is "value" inside a class we define two variable that is "modified and val". Where modified is a boolean variable that holds boolean value true or false and val is an integer variable that holds an integer value. Inside the class, we define parameterized constructor in this constructor we pass an integer parameter that is "i" inside this constructor we use the val variable for hold i variable value. Then we define three functions that are "getVal, setVal, and wasModified". The getVal() function is used for return value. The setVal() function uses an integer parameter that is "i" this function holds value in variable i in val variable and change value of the modified variable that is "true". The wasModified() function is used to return modified variable value.If it can be applied, the least-damaging recovery option is ________. Group of answer choices restoration from backup tapes total reinstallation repair during continuing server operation All of these are about equally damaging
Answer:
Repair during continuing server operation
Explanation:
If it can be applied, the least-damaging recovery option is Repair during continuing server operation Group of answer choices restoration from backup tapes total reinstallation repair during continuing server operation All of these are about equally damaging
You are designing a disaster recovery plan that includes a multi-site configuration. The backup site must include all necessary hardware and current backups of the original site. Which type of site do you need to design?
A Cold site
B. Warm site
C. Hot site
D. Virtual site
Answer: C. Hot site
Explanation:
Hot site is a type of backup site which must include all necessary hardware, software, network, internet connectivity and current backup of the original site. It also allows a company or firm to resume back to normal business operations, within a short period of time after a disaster
An OR function nested in an IF function results in
A. returning a certain formula or value if one of either two conditions is met.
B. returning a certain formula or value if all listed conditions are met.
C. applying either one formula or another regardless of which conditions are met.
D. applying two or more formulas regardless of which conditions are met.
Answer: C: an IF function within an IF function
Explanation:
NOTE: in mathematics, the square root of a negative number is not real; in Java therefore, passing such a value to the square root function returns a value known as NaN (not-a-number). Given a double variable named areaOfSquare write the necessary code to read in a value, the area of some square, into areaOfSquare and print out the length of the side of that square. HOWEVER: if any value read in is not valid input, just print the message "INVALID". ASSUME the availability of a variable, stdin, that references a Scanner object associated with standard input.
import java.util.Scanner;
class square_root
{
public static void main (String[] args)
{
Scanner s=new Scanner(System.in);
System.out.print("Enter the area: ");
double areaOfSquare=s.nextDouble();
if(areaOfSquare<0)
{
System.out.println("INVALID");
System.exit(2);
}
System.out.println("The side of the square is: "
+Math.sqrt(areaOfSquare));
}
}
Answer:
import java.util.Scanner;
class square_root
{
public static void main (String[] args)
{
Scanner s=new Scanner(System.in);
System.out.print("Enter the area: ");
double areaOfSquare=s.nextDouble();
if(areaOfSquare<0)
{
System.out.println("INVALID");
System.exit(2);
}
System.out.println("The side of the square is: "
+Math.sqrt(areaOfSquare));
}
}
Explanation:
To read the area of a square and compute its side length in Ja-va, check for negative inputs and handle them by printing "INVALID". For valid inputs, compute the square root and print the result.
To solve the problem of reading the area of a square and printing the side length, follow the steps below:
Read the input value for the area of the square.Check if the input value is negative. If it is, print "INVALID".If the value is valid (non-negative), compute the square root and print the side length.Here is the updated code:
import ja-va.util.Scanner;The basic business system that serves the operational level (analysts) and assists in making structured decisions; an example is an operational accounting system such as payroll or an order-entry system
Answer:
Transaction processing system
Explanation:
A transaction processing system or TPS can be defined as a system that is used to observe the transaction ongoing is a database system. It overcomes the problem of the online booking system.
The transaction processing system also helps in processing the order, keeping the records of the employee, maintaining the payroll systems, also to keep observation on accounts of receivables and payables.
HELP PLS TIME LIMIT HERE
When should you contact your instructor if you experience problems or questions with your online course?
A.After you talk to the lab instructor
B.At the end of the day
C.When you receive an email from the teacher
D.Immediately
Answer:
D. immediately
Explanation:
Passing by reference is used if a parameter's data flow is A. one-way, into the function. B. one-way, out of the function. C. two-way, into and out of the function. D. a and b above E. b and c above
Passing by reference is used if a parameter's data flow is two-way, into and out of the function.
C. two-way, into and out of the function.
Explanation:
If a function in programming language passing the parameter by reference means it only sending the address of parameter to a function. If any value is changed on reference parameter it will changed original value.
If parameter passed by value means it is one way, where value been send to the function.
Whereas by reference means it two-way, in and out of the function. Mostly it called as pointer.
It is available in c , c++, where declare of variable “*” or “&” address off.
_____ was just a sophomore when he began building computers in his dorm room at the University of Texas. His firm would one day claim the top spot among PC manufacturers worldwide.A. Bill GatesB. Steve JobsC. Michael DellD. Shawn FanningE. Mark Zuckerberg
Answer: C) Michael Dell
Explanation:
Michael S. Dell is the founder of Dell technology and has produced a huge technological infrastructure named as Dell Inc and also became it's CEO.He started to develop computers in University of Texas's room when he was a college student Other options are incorrect because Steve Jobs studied in Reed college. Mark Zuckerberg studied in Harvard university and Bill Gates also did his college studies from Harvard University. Thus , the correct option is option(C).Assume the existence of a BankAccount class. Define a derived class, SavingsAccount that contains two instance variables: the first a double, named interestRate, and the second an integer named interestType. The value of the interestType variable can be 1 for simple interest and 2 for compound interest. There is also a constructor that accepts two parameters: a double that is used to initialize the interestRate variable, and a string that you may assume will contain either "Simple", or "Compound", and which should be used to initialize the interestType variable appropriately. There should also be a pair of functions getInterestRate and getInterestType that return the values of the corresponding data members (as double and int respectively).
Answer:
Class SavingsAccount : public BankAccount
{
double interestRate;
int interestType;
public SavingsAccount(double interestRate, string interestType)
{
this.interestRate=interestRate;
if(interestType=="Simple")
this.interestType=1;
else if(interestType=="Compound")
this.interestType=2;
}
public double getInterestRate()
{
return this.interestRate;
}
public int getInterestType()
{
return this.interestType;
}
}
Explanation:
Consider this data sequence: "3 11 5 5 5 2 4 6 6 7 3 -8". Any value that is the same as the immediately preceding value is considered a CONSECUTIVE DUPLICATE. In this example, there are three such consecutive duplicates: the 2nd and 3rd 5s and the second 6. Note that the last 3 is not a consecutive duplicate because it was preceded by a 7.
Write some code that uses a loop to read such a sequence of non-negative integers , terminated by a negative number. When the code exits the loop it should print the number of consecutive duplicates encountered. In the above case, that value would be 3.
Answer:
Following is the source code required:
int entry_1 ,entry_2 = -1, consecutive_duplicates = 0;
do {
cin >> entry_1;
if ( entry_2 == -1)
{
entry_2 = entry_1;
}else
{
if ( entry_2 == entry_1 )
consecutive_duplicates++;
else
entry_2 = entry_1;
}
}
while(entry_1 > 0 );
cout << consecutive_duplicates;
Explanation:
Following is the explanation for given code:
3 integers are declared as entry_1, entry_2 and consecutive_duplicates.entry_2 = -1 (it will tell that the integers are non-zero)user will enter the value for entry_1The loop will be applied which will check for the value of entry_2. If entry_2 = -1, the value of entry_1 will be stored in entry_2 else it the value of entry_2 is already equal to entry_1, the integer consecutive_duplicate in increased by one.Now the value of entry_1 is stored in entry_2 , so that next entity might be checked.In the end, while the entry_1 is greater than zero (unless the last (negative)element of array is reached), print the integer consecutive_duplicates.i hope it will help you!
The final answer to the problem is that the code, when executed, should print the number 3. This represents the number of consecutive duplicates within the given sequence of integers.
In this scenario, we are required to write a piece of code that analyzes a sequence of integers and identifies consecutive duplicates - values that are immediately repeated in the sequence. To accomplish this, we need a loop to read through each number in the sequence and compare it with the previous value. If a number is the same as its predecessor, we increment a counter. We continue this process until we reach a negative number, which is the termination point for the data sequence. The number of duplicates can be tracked using a variable that increments each time a duplicate is found. Python pseudocode for this would initially set a previous number to 'None', compare each new number to the previous one, and if they are the same (and not the first number), increment a duplicates counter. The loop ends when a negative number occurs, and the script returns the value of the duplicates counter as the result.
1. How has ESPN handled the rise of Twitter? How has it incorporated Twitter into Sports Center?
2. What has ESPN, originally a cable-only service, done to adjust to the rise in users canceling their cable subscriptions in favor of unbundling services?
3. What is the most important show on ESPN? What has ESPN done to upgrade it?
Answer:
well
Explanation:
For the following:
ESPN uses Twi-tter to engage fans, provide commentary, and promote content.ESPN has launched its own streaming service, made content available on other streaming platforms, and created apps to adjust to cord-cutting.ESPN has upgraded SportsCenter by adding digital elements and making it more interactive.What occurs in ESPN?1. ESPN has handled the rise of Twi-tter in a number of ways. They have integrated Twi-tter into their programming, including SportsCenter, by using messages from fans and analysts to provide commentary and analysis. They have also created their own Twi-tter accounts for their shows and personalities, which they use to interact with fans and promote their content.
2. ESPN, originally a cable-only service, has done a number of things to adjust to the rise in users canceling their cable subscriptions in favor of unbundling services.
3. The most important show on ESPN is SportsCenter. It is the flagship show of ESPN and has been on the air since 1979. SportsCenter is a news and highlights show that covers a variety of sports. It is also known for its witty commentary and analysis.
ESPN has done a number of things to upgrade SportsCenter in recent years. They have added more digital elements to the show, such as messages from fans and analysts. They have also made the show more interactive, allowing fans to vote on polls and participate in discussions.
Find out more on ESPN here: https://brainly.com/question/29998283
#SPJ3
Your computer sign-in screen is visible, but after you enter your sign-in credentials the computer fails to sign in and present your desktop, then finally it restarts and takes you back to the sign-in screen. You want to get in to the Windows Recovery environment. What key do you hold down when you restart the computer to start the Windows Recovery environment?
a F8
b Ctrl
c F10
d Shift
Answer:
A
Explanation:
The answer is F8. The key that will usually take one into the windows recovery environment is F8, though it do varies with regard to the type of computer because some computer define explicit key that take one to the windows recovery environment. Even in other computer, it is usually between F1 - F12.
To remove any hidden data from your document before sharing it, what should you do?
A. Click the View tab and then click Protect Document.
B. Click the File tab, click Check for Issues, and then click Protect Document.
C. Click the File tab, click Check for Issues, and then click Inspect Document.
D. Click the File tab, click Check for Issues, and then click Check Accessibility.
Word processing and spreadsheet software are examples of _____, which are used broadly across large and small businesses.
a. operating system software
b. utility programs
c. horizontal applications software
d. vertical applications software
Answer:
Word processing and spreadsheet software are an example of Horizontal application software, which are used broadly across large and small businesses.
Explanation:
Horizontal Application software is a type of software which needs the support of system software to work properly. Application software is used to perform some specific works. This Application software is not by default in the system, it needs to be installed manually.
Suppose your school’s computer lab provides high-end architecture software that can be accessed from any lab computer, but a maximum of 5 students can use it at any given time. What kind of license does it have
Answer:
Multiple-user licence.
Explanation:
A multiple-user licence allows the software to be accessed by the maximum number of users specified within the licence. In this scenario, it is 5 students, the connections are concurrent, meaning at any given time there can only be five users running the software. The software can be installed on more than 5 computers, but the number of active users is limited to 5.
What will be the value of bonus after the following code is executed?
int bonus, sales = 6000;
if (sales < 5000);
bonus = 200;
else if (sales < 7500);
bonus = 500;
else if (sales < 10000);
bonus = 750;
else if (sales < 20000);
bonus = 1000;
else;
bonus = 1250;
A. 200
B. 500
C. 750
D. 1000
Answer:
Option (B) i.e., 500 is the correct option to the following question.
Explanation:
The following option is correct because here, firstly they defined two integer data type variable i.e., "bonus" and "sales" and assign value to the variable "sales" i.e., 6000 then, the set the if-else if statements to check the "bonus" and pass conditions is if the sales is less than 5000 then bonus is equal to 200 otherwise if the sales is less the 7500 then bonus is equal to 500 otherwise if the sales is less the 10000 then bonus is equal to 750 otherwise if the sales is less the 2000 then bonus is equal to 1000 otherwise bonus is equal to 1250.
So, according to the following conditions sales is less than 7500 because sales is equal to the 6000 that's why the following option is correct.
As the design phase of an SDLC begins, programming languages, development tools, and application software needed for the new information system are purchased, installed, and tested to ensure that they work correctly.
A. TRUE
B. FALSE.
Answer:
FALSE
Explanation:
In the design phase of SDLC we design the document which are used in the implementation phase. In this phase the SRS document is converted into the logical view structure that holds the whole specification.
Their are following points about Design phase of SDLC
After the analysis phase the designing phase is implemented .In the beginning it does not need programming languages, development tools etc .So the given statement which is mention in question is FALSE
A security analyst is diagnosing an incident in which a system was compromised from an external IP address. The socket identified on the firewall was traced to 207.46.130.0:6666. Which of the following should the security analyst do to determine if the compromised system still has an active connection?
A. tracert
B. netstat
C. ping
D. nslookup
Answer:
Option B. netstat
is the correct answer.
Explanation:
The word "netstat" is a combination of two words network statistics. It is defined as a program which is controlled through commands that are issued in the command line.It displays the network connections for network interfaces, routing tables Transmission Control Protocol (TCP) and UDP.netstat command informs the user about portstand addresses and delivers the basic statistics on all network activities.It is available for operating systems including:UnixMacBSDLinux SolarisIBMWindowsi hope it will help you!
In the source-code file containing a class's member function definitions, each member function definition must be tied to the class definition by preceding the member function name with the class name and ::, which is known as the:
Answer:
"Binary scope resolution operator" is the correct answer to the following question.
Explanation:
The following answer is correct because the Binary scope resolution operator is represented by the double colon(::).
The Binary scope resolution operator is used in many ways in different programming languages. In C++, the Binary scope resolution operator is used to call the global variable if the name of both global and local variables is the same and also use when we want to define method from the external side of the class and we also used to access any static data type variable.
Tommy is repeating a series of digits in the order in which he heard an experimenter read them. The experimenter is testing the capacity of Tommy's ________ memory. Tommy should be able to repeat about ________ digits correctly.
a. short-term; 4b. short-term; 7c. sensory; 4d. sensory; 7
Answer:
short-term
7
Explanation:
Short-term memory is the capacity for holding, but not manipulating, a small amount of information in mind in an active, readily available state for a short period of time.
The human brain can only hold about seven pieces of information for less than 30 seconds.
As an example:
Tommy is repeating a series of digits in the order in which he heard an experimenter read them. The experimenter is testing the capacity of Tommy's short term memory. Tommy should be able to repeat about 7 digits correctly.
n a MenuStrip, if you create each main menu item with a(n) ____ in front of a unique letter, then the user can press Alt and the given letter to activate the menu choice as an alternative to clicking it with the mouse.
A) %
B) $
C) &
D) >
Answer:
C) &
Explanation:
In the C# programming language a MenuStrip adds a custom menu bar to the program that you are making in which you can create unique menu items. When doing so, if you create a menu item with an & in front of a unique letter, the user can press ALT and the letter to activate the menu choice. These shortcuts are known as Access Keys.
you work in the Human Resources department of a company that has partnered with a similar company in Brazil on a big contract. you have been asked to create a visual that will help the sales team understand who their counterparts are in the Brazilian company. what should you create?a. flowchartb. mapc. tabled. organizational chart
Answer:
Option C: Organizational Chart.
Explanation:
The main goal, in this case, it's to help the team to know the company and its integrants.
An organizational chart -- also called organigram -- is the best tool to clarify how the Brazilian company works.
The organigram is a diagram that illustrates the structure of an organization, how one part its related to another, and the assigned responsibilities of each specific department. Through this tool, the team will have a clear idea of who their counterparts are and how their job is related to ours.
Final answer:
To help the sales team understand their counterparts in the Brazilian company, you should create an organizational chart. This visual tool will detail the company's structure, roles, and lines of communication, which is vital for building working relationships and setting clear goals for the team.
Explanation:
To help the sales team understand who their counterparts are in the Brazilian company, you should create an organizational chart. An organizational chart will display the company structure and detail the roles of each team member, making it easier for your sales team to identify and understand their counterparts. It shows who does what, where each person fits into the organization, and who reports to whom, thus clarifying lines of communication and authority. This will be extremely beneficial for forging effective working relationships with the Brazilian team.
When creating an organizational chart, consider including not only the names and titles of the counterparts but also a brief description of their roles and responsibilities. This can help your sales team to learn about the type of work others do and how it relates to what they do. It's worth noting that organizational structures have become more flattened in recent years, so forming collegial relationships with all levels of staff is encouraged. Developing such a chart will also assist in maximizing the first year on the job by setting clear goals and milestones for your team.