Aluminum sulfate is formed when an aluminum cation that has a 3+ charge combines with a sulfate ion that has a 2- charge. Write the formula for the compound aluminum sulfate. Font Sizes
Answer : The formula for the compound aluminum sulfate is [tex]Al_2(SO_4)_3[/tex]
Explanation :
For formation of a neutral ionic compound, the charges on cation and anion must be balanced.
The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non-metals.
In the given question, the aluminum metal forms an ionic compound with polyatomic anion (sulfate) [tex]SO_4^{2-}[/tex].
Here, aluminum is having an oxidation state of +3 called as [tex]Al^{3+}[/tex] cation and sulfate [tex]SO_4^{2-}[/tex] is an anion with oxidation state of -2. The charges are not balanced. So, the charges are balanced by the cris-cross method. Thus, the compound formed will be, [tex]Al_2(SO_4)_3[/tex]
Hence, the formula for the compound aluminum sulfate is [tex]Al_2(SO_4)_3[/tex]
The formula for aluminum sulfate is Al₂(SO₄)₃. This is because two Al³+ ions balance three SO₄²⁻ ions to achieve electrical neutrality.
Explanation:The compound aluminum sulfate is formed when an aluminum cation (Al³+) combines with a sulfate ion (SO₄²⁻). Given that atoms strive to reach electrical neutrality, the formula for this ionic compound reflects the simplest ratio that can balance the positive and negative charges. In this case, two aluminum ions (2 x +3 for a total charge of +6) are needed to balance three sulfate ions (3 x -2 for a total charge of -6), resulting in the chemical formula Al₂(SO₄)₃.
Learn more about Aluminum Sulfate here:https://brainly.com/question/30588773
#SPJ6
If the empirical formula for a compound is ch2o, and the molar mass is 120.1 g/mol, the molecular formula for the compound is
Answer: Ik this is super late but for anyone looking for the real answer its this
Answer is C4H8O4
Explanation:
CH2O 12.0g+2(1.0g)+16.0g=30.0g
120.1/30.0=4
CH2O x 4 = C4H8O4
One of the compounds used to increase the octane rating of gasoline is toluene (pictured). suppose 8.30 ml of toluene (d = 0.867 g/ml) is consumed when a sample of gasoline burns in air.
The question is about the octane rating of gasoline and compound toluene that's used as an octane enhancer. An octane rating characterizes fuel's resistance to knock, originally based on a scale with n-heptane at 0 and isooctane at 100. Replacements for toxic enhancers like tetraethyl lead now include options such as toluene and ethanol.
The question involves the concept of octane rating, which is a measure of a fuel's ability to resist knocking or pinging during combustion, used in scoring gasoline. The octane scale was established using n-heptane, with an octane rating of 0, and isooctane (2,2,4-trimethylpentane), with an octane rating of 100. Fuel blends are scored against these standards to determine their octane rating. For example, a mixture of 89% isooctane and 11% n-heptane would have an octane rating of 89, representing an intermediate grade of gasoline.
Enhancers, such as toluene or ethanol, are used to increase the octane rating of gasoline. Toluene, which has a higher octane rating than 100, provides better fuel performance than pure isooctane. Historically, tetraethyl lead was used as an anti-knock agent, but due to its toxicity, it has been phased out and replaced with other substances like MTBE and ethanol.
a mixture of iodine and sulphur crystal can be separated by treating with what ??
A mixture of iodine and sulphur can be separated by various ways:
1. Add Carbon disulphide that is (CS₂) then stir the solution and filter it . As sulphur dissolved in CS₂, so it come into filter and got separated from the mixture.
2. Take the mixture in a china dish and cover it with a inverted funnel and heat it, on heating iodine will get sublime and produces vapors . These vapors condenses at funnel and produce iodine solid.
A 2,000g of C-14 is left to decay radioactively. The half-life of Carbon-14 is approximately 5,700 years. What percentage of the sample will remain after 17,100 years?
1/8 when using usatestprep
Name the complex mncl2(en)2. the oxidation number of manganese is +2.
The atomic mass of gold is 197 g/mole, and the density of gold is 19.3 g/cm3. using this information along with the measured value of young's modulus, calculate the speed of sound in gold.
Select the correct location on the diagram.
Ocean currents affect the climate of the landmasses they come near. Which of the following locations most likely experiences a warmer climate due to a nearby ocean current than it otherwise would? Choose the correct red circle on the diagram.
Please help thanks so much!!!
In an ecosystem, Europe is the country on map which will experience a warmer climate due to a nearby ocean current than it otherwise would.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ6
Which of the following molecules is polar? CH4, Ch3OH, CO2
Identify the spectator ions in the following complete ionic equation.
2
K
+
(aq)+
S
2−
(aq)+
Pb
2+
(aq)+2
NO
−
3
(aq)→PbS(s)+2
K
+
(aq)+2
NO
−
3
(aq)
Express your answers as ions separated by a comma.
What was the resulting molarity of your primary standard solution of potassium iodate kio3?
What would happen if you placed your product in a drying oven set near 138 synt745?
A population in an ecosystem cannot grow indefinitely. There are limiting factors in each ecosystem that keep a population within a certain size range. Which of the following is most likely NOT a limiting factor for a population of deer in a forest ecosystem?
A. the number of perching birds present B. the amount of edible plants available C. the number of mountain lions present D. the amount of space in the forest
THE ANSWER IS
the number of perching birds present
When a stable diatomic molecule spontaneously forms from its atoms, what are the signs of δh°, δs°, and δg°?
The formation of a stable diatomic molecule from atoms typically results in a negative ">δH°<", a negative ">δS°<", and a negative ">δG°<". This reflects an exothermic reaction with decreased entropy, leading to spontaneity under the right temperature conditions.
When a stable diatomic molecule forms from its atoms, there are typical changes in enthalpy (">">δH°"), entropy (">">δS°"), and Gibbs free energy (">">δG°"). The formation of a stable molecule from atoms is typically exothermic, which means that energy is released, and ">">δH°" would be negative. As atoms come together to form a molecule, the system becomes more ordered, and thus, the change in entropy, ">δS°<", is negative.
According to the Gibbs free energy equation, ">δG° = δH° - TδS°<", and at a temperature (T) where this process is spontaneous, the sign of ">δG°<" would be negative because loss of heat (">">exothermic reaction") and orderliness in system (">">decreased entropy") favor the formation of the molecule.
What process forms high non-volcanic mountain ranges?
A. One tectonic plate is splitting apart into two plates.
B. Two tectonic plates are colliding and pushing together.
C.One tectonic plate is sliding past another tectonic plate.
D. Two tectonic plates are colliding and one is sliding under the other.
The answer is D. Two tectonic plates are colliding and one is sliding under the other
Consider melting ice cream. When it melts, it takes heat away from the environment and so the reaction is endothermic. When you freeze ice cream, the heat is being removed from what?
Draw the two chair conformations of cis 1 chloro 2 methylcyclohexane
The two chair conformations of cis 1 chloro 2 methylcyclohexane are shown in the image attached.
Due to the cyclohexane ring's capacity for ring flipping, isopropyl chloro-2-methylcyclohexane displays two chair conformations. The methyl group is positioned equatorially in the first conformation, while the chlorine atom is located in the axial position.
The chlorine atom is in the equatorial position and the methyl group is in the axial position in the second conformation, which has the substituents arranged in reverse order. These conformations show the dynamic character of cyclohexane rings, where substituents can be positioned in either an axial or an equatorial orientation to minimize steric hindrance between them by ring flipping.
Assuming equal concentrations, rank these solutions by pH.
Classify methanol (ch3oh) as a strong electrolyte, a weak electrolyte, or a nonelectrolyte.
Explanation:
A strong electrolyte is defined as the one which contains solute that completely dissociates into ions. Strong acids will lead to the formation of strong electrolytes.
For example, HCl will make a strong electrolyte.
Whereas a weak electrolyte is defined as the one which contains solute that slightly dissociates into ions.
For example, [tex]CH_{3}OH[/tex] is a weak electrolyte.
This is because methanol when dissolved in water does not completely dissociates into ions. Therefore, very less number of ions are present into the solution and as a result, the solution will not be able to conduct electricity.
Also, oxygen atom being more electronegative in nature will hold the hydrogen atom of O-H more tightly, Hence, very less or no hydrogen ions will not present into the solution.
Therefore, we can conclude that methanol is a weak electrolyte.
Methanol, or CH3OH, is classified as a nonelectrolyte because it does not ionize or produce ions when dissolved in water, and can't therefore conduct electricity. In contrast, substances that do dissolve in water to produce ions, and can conduct electricity are electrolytes, either strong or weak.
Explanation:The student question classifies methanol (CH3OH) as a strong electrolyte, a weak electrolyte, or a nonelectrolyte. Methanol would be classified as a nonelectrolyte.
Electrolytes are substances that when dissolved in water, they produce ions. If the process is almost 100% efficient, the substance can be considered a strong electrolyte. If only a small percentage of the substance produces ions, it is a weak electrolyte. However, substances that do not produce ions when dissolved in water are called nonelectrolytes.
Methanol, in this case, does not ionize when dissolved in water, therefore, doesn't produce ions. This classifies it as a nonelectrolyte. This can be further confirmed through a conductance test. Electrolytes can conduct electricity when dissolved in water due to the presence of ions. Since methanol doesn't produce ions when dissolved, it won't conduct electricity, substantiating its classification as a nonelectrolyte.
Learn more about Electrolytes here:https://brainly.com/question/33930290
#SPJ11
A 15.0 kg chunk of ice falls off the top of an iceberg. If the chunk of ice falls 8.00m to to the surface of the water, what is the kinetic energy of the chunk of ice when it hits the water, and what is its velocity
Use the chart to determine which pair of atoms has the greatest difference in electronegativity
A. Ca-CI
B. H-CI
C. Fe-CI
D. P-CI
Describe how you would make 1.0 l of a supersaturated solution of cdi2
Final answer:
Creating a supersaturated solution of cadmium iodide involves dissolving as much solute as possible in water at an elevated temperature and then slowly cooling the solution to room temperature without disturbance.
Explanation:
To make 1.0 L of a supersaturated solution of cadmium iodide (CdI2), first a saturated solution must be prepared at a temperature higher than room temperature by dissolving as much CdI2 as possible. This can be done by gradually adding CdI2 to a liter of water with continuous stirring while heating the solution to increase the solubility. Once no more salt can dissolve, the solution is allowed to slowly cool to room temperature, making sure to avoid any disturbance that could cause premature crystallization. As the solution cools, it becomes supersaturated because the solubility of CdI2 decreases with temperature, allowing more solute to be contained in solution than is stable at the lower temperature.
If the solution remains undisturbed, the excess solute will stay dissolved, resulting in a supersaturated solution. However, any disturbance or addition of a seed crystal will cause the excess solute to precipitate out rapidly. Therefore, care must be taken to keep the solution free from dust and vibrations that can induce crystallization.
You are at home in your air conditioned garage. You are planning a family road trip from New York to Florida. You are lnfating the tires of your suv. You fill each car-tire with about 10 Liters of air. The temperature inside your air conditioned garage is about 10 degrees Celsius. Your family packs the car, and you begin your trip to Florida. The temperature in New York is about 21 degrees Celsius, and the happen temperature in Florida is 32 degrees Celsius. Assuming the pressure stays constant from the garage all the way to Florida, what could to your car tires during your road trip.
Write a paragraph that makes a claim about what happen to the car tires
What is a base used in toothpaste?
sorbitol
carrageenan
magnesium hydroxide
sodium lauryl sulfate
Answer:
The Answer is C. magnesium hydroxide
Explanation:
a solution is another name for
Answer:
A solution is another name for homogeneous mixture.
Explanation
Solution or homogeneous mixture are names for the classification of matter.
Matter is classified in 2 big groups: pure substances and mixtures.
Pure substances: are those that cannot be separated into more simple ones by physics methods, and are classified in compounds and elements.
Elements: these cannot be separated into more simple substances by chemical methods, e.g.: Au, Cu, Na, Cl, etc.Compounds: these are formed by two or more elements and can be separated into more simple substances by chemical methods, e.g: H₂O, CO₂, NaCl, etc.Mixtures: are those that can be separated into more simple ones by physics methods, and are classified in homogeneous and heterogeneous.
Homogeneous mixture (solution): has the same composition in the whole mixture and its components cannot be detected easily e.g: sugar dissolved in water.Heterogeneous mixture: has different compositions in the whole mixture and its components can be detected easily in different phases, e.g.: water and cooking oil.How many p electrons are in the thiazoline ring of thiamine hydrochloride? of thiamine?
Final answer:
The thiazoline ring in thiamine hydrochloride and thiamine contains two p electrons, one from each of the two carbon atoms in the ring.
Explanation:
The student has asked about the number of p electrons in the thiazoline ring of thiamine hydrochloride and thiamine. Thiazoline is a heterocyclic compound made up of a five-membered ring containing both sulfur and nitrogen atoms. In thiamine, the thiazoline ring contributes to the structure of thiamine pyrophosphate (TPP), which is the active co-enzyme form of thiamine.
In the thiazoline ring, there are two carbon atoms that can have p electrons in their p orbitals. Each carbon atom has one p electron that is not involved in sigma bonding (single covalent bonds). Therefore, the thiazoline ring contains a total of two p electrons from the carbon atoms. The nitrogen and sulfur atoms do not contribute p electrons that are relevant to the aromaticity or reactive properties of the thiazoline ring in thiamine. The thiazoline ring does not have a completely conjugated pi system like the thiazole ring, which is a closely related structure.
Explain how archimedes might have used the concept of density to determine whether the king's crown was pure gold. (density of gold is known to be 19.32 g/cm3 )
How do chemical weathering and physical weathering affect each other?
Determine the osmotic pressure of a solution that contains 0.048 g of a hydrocarbon solute (molar mass = 340 g/mol0
Final answer:
The osmotic pressure of a solution containing 0.048 g of a hydrocarbon with a molar mass of 340 g/mol is calculated by first finding the molarity and then using the osmotic pressure formula, resulting in approximately 0.00345 atm.
Explanation:
To determine the osmotic pressure of a solution containing a hydrocarbon solute, first, calculate the molarity of the solution. The molarity (M) is the number of moles of solute per liter of solution. Since the molar mass of the hydrocarbon is given as 340 g/mol, you can find the number of moles of solute by dividing the mass of the solute by its molar mass.
Number of moles = Mass (g) / Molar Mass (g/mol) = 0.048 g / 340 g/mol = 0.000141 mol
The volume of the solution is not given, but assuming it's 1 liter for the sake of calculation. Divide the number of moles by the volume to get molarity:
Molarity (M) = Number of moles / Volume (L) = 0.000141 mol / 1 L = 0.000141 M
To find the osmotic pressure, use the formula:
Osmotic Pressure (II) = MRT
Where M is the molarity, R is the gas constant (0.0821 L·atm/(K·mol)), and T is the absolute temperature in Kelvin. Assuming room temperature (25°C or 298 K) for the calculation:
II = (0.000141 M) x (0.0821 L·atm/K·mol) x (298 K)
Therefore, the osmotic pressure is:
II = (0.000141) x (0.0821) x (298) ≈ 0.00345 atm
2C6H5COOH + 15O2 → 14CO2 + 6H2O which of the following options gives the correct product:product ratio?
The product: product ratio in the provided chemical equation, which represents the combustion of benzene-acetic acid, is 14CO₂:6H₂O. So, for every two molecules of benzene-acetic acid reacted, 14 molecules of carbon dioxide and 6 molecules of water are produced.
Explanation:The equation provided is a chemical reaction representing the combustion of benzene-acetic acid (C₆H₅COOH). The correct product: product ratio is determined by the stoichiometric coefficients in front of each product. In this selected reaction, for every two molecules of benzene-acetic acid that react with 15 molecules of oxygen, 14 molecules of carbon dioxide (CO₂) and 6 molecules of water (H₂O) are produced.
Therefore, the product: product ratio is 14CO₂:6H₂O. This means for each reaction, you will get more than twice as much carbon dioxide as water. This ratio helps us to understand how much of each product we can expect when the reaction takes place, assuming there are sufficient reactants to complete the reaction.
Learn more about Chemical Reactions here:https://brainly.com/question/34137415
#SPJ11