Answer:
900 grams
Explanation:
NB: 1litres=1000ml
Density=mass/volume
900kg/m³=mass/1000ml
mass =900kg/m³×100ml
mass=900grams
The mass of the alcohol in one liter of the mixture must be less than or equal to 0.9 kg, given that the density of the mixture is 0.9 kg/liter.
Explanation:The key point to remember here is that the density of a solution is the ratio of its mass to its volume. Here, we are given that the density of the water-alcohol mixture is 900 kg/m3. Note that 1 m3 is equal to 1000 liters, so the density can also be expressed as 900 kg/1000 liters, or 0.9 kg/liter.
Since the question asks for the mass of the alcohol in one liter of the solution, and assuming that the entire liter is made up of the solution without any empty space, the mass of the solution in one liter would be 1 liter * 0.9 kg/liter = 0.9 kg.
Therefore, the mass of alcohol in one liter of the mixture must be less than or equal to 0.9 kg, assuming none of the mass is from any other substance. In order to find the exact mass of the alcohol, additional information would be required such as the ratio of water to alcohol in the mixture.
Learn more about Density and Mass here:https://brainly.com/question/31578008
#SPJ2
at what age u are a teens
Answer:
13 to 19 years old
Explanation:
Because these 6 years there is the word TEEN 13, 14, 15, 16, 17, 18, and 19. but in 20 there is no teen.
PLEASE MARK AS BRAINLIEST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A force F~ = Fx ˆı + Fy ˆ acts on a particle that
undergoes a displacement of ~s = sx ˆı + sy ˆ
where Fx = 7 N, Fy = −1 N, sx = 3 m, and
sy = 3 m.
Find the work done by the force on the
particle.
Answer in units of J.
Find the angle between F~ and ~s.
Answer in units of ◦
Answer: Work done is 18J
Explanation:
Force F = (Fx, Fy) and Displacement S = (Sx,Sy)
Fx=7N
Fy=-1N
Sx=3m
Sy=3m
F=(7,-1)N and S=(3,3)m
Work done is calculated by taking dot product of force and displacement vector
W=F·S
W=7×3 + (-1)×3
W=21+(-3)=18J
Answer:
18 and 35 degrees
Explanation:
PLZZZZZ ANSWER Which example describes a nonrenewable resource?
Everyone in our neighborhood uses solar panels to generate electricity to run their pool pumps.
Once up and running, the power plant will convert the energy from tides and waves into electricity.
There is a long stretch of land in the desert with many windmills that are able to generate enough electricity to run the town.
There are drilling platforms all along the coast that are used to drill for natural gas that can be used to generate electricity.
Answer:
I believe that the answer is D. There are drilling platforms all along the coast that are used to drill for natural gas that can be used to generate electricity.
Explanation:
Solar panels use the sun, and that is renewable.
The power plant uses tides and waves, they are renewable.
Windmills use wind, that is renewable.
So, the answer is D.
Answer:
D. There are drilling platforms all along the coast that are used to drill for natural gas that can be used to generate electricity.
what is the role of a generator in producing electricity
Answer:
It stores electrical energy for later
Explanation:
Answer:
The generator transforms the mechanical energy of the turbine into electrical energy.
Explanation:
What is the magnitude of component of a vector in
right angle to itself, ?
Yes, but it's a null vector .So,no vector can have a component at right angle to itself unless it is a zero vector.
The magnitude of a vector component at a right angle to the vector is zero, and the condition for the resultant of two vectors of equal magnitude to equal the magnitude of either one is when the angle between them is 0 or 180 degrees.
The magnitude of the component of a vector at a right angle to itself is always zero because a vector cannot have a component in the direction that is perpendicular to its direction of action. When we calculate the magnitude A and direction of a vector from its perpendicular components Ax and Ay, relative to the x-axis, we use trigonometric relationships, where Ax = A×cos(θ) and Ay = A×sin(θ).
Now, under the specific condition when two vectors are at right angles to each other, the magnitudes of their sum and difference are the same. This happens because the vectors are orthogonal, and their components in the direction of each other are zero. We also know that when the components are equal and vectors are added with an angle of 90 degrees between them, the magnitude of the resultant equals the magnitude of either vector multiplied by the square root of two. This is due to Pythagoras' theorem applied in the context of vector addition.
If a ball is rolling at a velocity of 1.5 meters per second and has a momentum of 10.0 kg meters per second what is the mas6of the ball
The mass of the ball is 6.67 kg
Explanation:
The momentum of an object is given by:
[tex]p=mv[/tex]
where
p is the momentum
m is the mass of the object
v is its velocity
It must be noted that momentum is a vector quantity, so it has both magnitude and direction (but here only the magnitude is given).
For the ball in this problem, we have:
v = 1.5 m/s is its velocity
p = 10.0 kg m/s is its momentum
Solving the formula for m, we find the mass of the ball:
[tex]m=\frac{p}{v}=\frac{10}{1.5}=6.67 kg[/tex]
Learn more about momentum:
brainly.com/question/7973509
brainly.com/question/6573742
brainly.com/question/2370982
brainly.com/question/9484203
#LearnwithBrainly
How does a rotating coil inside a magnetic field generate electricity?
The rotating coil allows a different amount of magnetic field lines through the loop while it spins. This means the magnetic field is changing, which induces an electric current.
The rotating coil changes the electric field as it spins. A changing electric field generates a magnetic field, which induces an electric current.
The rotating coil allows the same amount of magnetic field lines through the loop while it spins. This means the magnetic field is constant, which induces an electric current.
The rotating coil maintains a constant electric field as it spins. A constant electric field generates a changing magnetic field, which induces an electric current.
Answer:option A is correct.
Explanation:Because in option C :magnetic field is constant.
Option D:Because in option D,electric field is constant.
Because constant electric and magnetic fields cannot produce electric current.
Option B:A changing electric field cannot produce magnetic field.
Option A:Because a changing magnetic field can produce electric current.
A rotating coil in a magnetic field generates electricity by electromagnetic induction, where a changing magnetic field within the coil induces an electric current.
Explanation:A rotating coil inside a magnetic field generates electricity through a process known as electromagnetic induction. This principle is based on Faraday's Law of Electromagnetic Induction that states a changing magnetic field within a conductive loop induces an electromotive force. As the coil rotates, it cuts across magnetic field lines, inducing a voltage change. The variation in the magnetic field induces an electric current in the coil. This process is the basic working principle behind many electrical generators and motors.
Learn more about Electromagnetic Induction here:https://brainly.com/question/32444953
#SPJ2
which region is colored orange in the periodic table
Answer:
Alkali Metals
Explanation:
Most commonly, the color represents what type of element it is (noble gas, alkali metal). This is not always true as different tables follow different coloring schemes
Colored tables are important because they give you an extra dimension of information. A typical periodic table is colored according to element groups, which are elements that share chemical and physical properties. Some element groups are easily identified as columns on the periodic table, but as you move across the table, the trends aren't so clear-cut. The metalloids and nonmetals, for example, don't fall neatly into the same column. Color coding helps identify similar elements such as these at a glance.
Final answer:
The orange region on a color-coded periodic table usually represents the f block, including lanthanides and actinides.
Explanation:
In the context of various color-coded periodic tables, the orange region typically represents the f block elements. An example can be found in an empty periodic table, separated into different colored blocks, where the s block is blue, the d block is green, the p block is red, and the f block is orange.
The f block includes lanthanides and actinides, which are typically shown at the bottom of the Periodic Table. These elements are known for their complex electronic configurations and are also referred to as inner transition metals.
a 3 kg piece of putty that is moving with a velocity of 10 m/s collides and sticks to an 8 kg bowling ball that was at rest. what is their velocity as they roll away together
The final velocity is 2.7 m/s
Explanation:
We can solve this problem by using the principle of conservation of momentum: in fact, in absence of external forces, the total momentum of the system must be conserved before and after the collision.
Therefore we can write:
[tex]p_i = p_f\\m_1 u_1 + m_2 u_2 = (m_1+m_2)v[/tex]
where:
[tex]m_1 = 3 kg[/tex] is the mass of the putty
[tex]u_1 = 10 m/s[/tex] is the initial velocity of the putty (we take its direction as positive direction)
[tex]m_2 = 8 kg[/tex] is the mass of the ball
[tex]u_2 = 0 m/s[/tex] is the initial velocity of the ball (at rest)
[tex]v[/tex] is the final combined velocity of the two putty+ball
Re-arranging the equation and substituting the values, we find the final combined velocity:
[tex]v=\frac{m_1 u_1 + m_2 u_2}{m_1+m_2}=\frac{(3)(10)+0}{3+8}=2.7 m/s[/tex]
And the positive sign indicates their final direction is the same as the initial direction of the putty.
Learn more about momentum here:
brainly.com/question/7973509
brainly.com/question/6573742
brainly.com/question/2370982
brainly.com/question/9484203
#LearnwithBrainly
What is the current through a 25 ohm resistor connected to a 5.0 V power supply? a 0.20 A b 5.0 A c 25 A d 30 A
The current through a 25 ohm resistor connected to a 5.0 V power supply is 0.2 A. Option A is correct.
Ohm's Law:
The voltage of the two points between in a conductor is directly proportional to the current flows through the conductor.
V = IR
Where,
V = voltage = 5.0 V
I = current = ?
R = resistance - 25 ohm
Put the values in the equation,
5 = 25 x I
I = 0.2 A
Therefore, the current through a 25 ohm resistor connected to a 5.0 V power supply is 0.2 A.
To know more about Ohm's Law:
https://brainly.com/question/796939
show that the centre of a rod of mass M and length L lies midway between the ends assuming that the rod has uniform cross section per unit length
Explanation:
The cross section per unit length is uniform, so ρ is constant.
The center of mass is therefore:
x_avg = (∫₀ᴸ x ρ dL) / (∫₀ᴸ ρ dL)
x_avg = (∫₀ᴸ x dL) / (∫₀ᴸ dL)
x_avg = (½ L²) / (L)
x_avg = ½ L
Which of the following diagrams represent a balanced force
Newton's First Law says that an object at rest will stay at rest, and an object in motion will stay in motion unless:
Question 1 options:
Acted on by a balanced force
Acted on by an unbalanced force
Acted on by equal forces in opposite direction
Acted on by multiple forces
Answer: Acted on by equal forces in opposite direction
Explanation:
Newton's First Law says that every body continue in its state of rest or constant speed on a straight line unless being acted upon by an external force.
Answer:
Acted on by equal forces in opposite direction
Explanation:
Accuracy and precision mean the same thing.
True or
False
Answer:
Accuracy refers to how close measurements are to the "true" value, while precision refers to how close measurements are to each other
The given statement " Accuracy and precision mean the same thing" is false because accuracy and precision are two distinct concepts used to describe the quality of measurements.
1. Accuracy: Refers to how close a measured value is to the true or accepted value. In other words, it measures the correctness of a measurement. A measurement is considered accurate if it is close to the true value.
2. Precision: Refers to the consistency or reproducibility of measurements. It describes how close multiple measurements of the same quantity are to each other. Precision does not necessarily imply accuracy; measurements can be precise but not accurate if they are consistently off-target.
In summary, accuracy relates to correctness, while precision relates to consistency. A measurement can be accurate, precise, both, or neither. Therefore, accuracy and precision do not mean the same thing, and it is essential to distinguish between the two when evaluating the reliability of measurements.
To learn more about Accuracy and precision here
https://brainly.com/question/31961485
#SPJ2
A weightlifter is bench-pressing 710 N. He raises the weight 0.65m above his chest. How much work does he do with this lift?
The work done is 6958 J
Explanation:
The work done by the man to raise the weight is the equal to the increase in gravitational potential energy of the weight, so we can write:
[tex]W=mg \Delta h[/tex]
where
(mg) is the weight, with m being the mass and g the acceleration of gravity
[tex]\Delta h[/tex] is the change in height of the weight
In this problem, we have
mg = 710 N (weight)
[tex]\Delta h = 0.65 m[/tex]
Therefore, the work done is
[tex]W=(710)(9.8)=6,958 J[/tex]
Learn more about work:
brainly.com/question/6763771
brainly.com/question/6443626
#LearnwithBrainly
The work done is 461.5 J.
Explanation:
According to Kinetics, the work done is calculated as the product of force which has done work, and the displacement it has imposed. Hence,
[tex]\text {Work done}=F \times s[/tex]
In the problem, the given data, F = 710 N and s = 0.65 m
By applying the given values to the work done equation, we get as follows,
[tex]\text { Work done } = 710 \times 0.65 = 461.5 \mathrm{J}[/tex]
The unit is same as the energy, work done defines when 1 N force acts in a 1 m distance along the force’s direction.
A 5kg rock is thrown off a cliff that is 20 meters high onto the beach. What was the ricks velocity when it hits the beach?
The final velocity of the rock is 19.8 m/s
Explanation:
The motion of the rock is a free fall motion (subjected only to the force of gravity), with constant acceleration [tex]g=9.8 m/s^2[/tex] towards the ground. Therefore, we can use the following suvat equation:
[tex]v^2-u^2=2as[/tex]
where
v is the final velocity
u is the initial velocity
a is the acceleration
s is the vertical displacement
For the rock in this problem,
u = 0 (initial velocity is zero)
[tex]a=g=9.8 m/s^2[/tex]
s = 20 m (height of the cliff)
Solving for v,
[tex]v=\sqrt{u^2+2as}=\sqrt{0+2(9.8)(20)}=19.8 m/s[/tex]
Learn more about free fall motion:
brainly.com/question/1748290
brainly.com/question/11042118
brainly.com/question/2455974
brainly.com/question/2607086
#LearnwithBrainly
What connects our muscles to our bones?
Answer:
Tendon connects our muscles to our bones.
Explanation:
A tendon (or sinew) is a tough band of fibrous connective tissue that usually connects muscle to bone and is capable of withstanding tension.
Tendons are similar to ligaments and fasciae; all three are made of collagen.
Ligaments join one bone to another bone; fasciae connect muscles to other muscles.
Tendons and muscles work together to move bones.
The tendon is the part of the muscle that connects directly to the bone.
Convert an absolute pressure of 6.31 ✕ 105 N/m2 to gauge pressure in lb/in2
Answer:
The gauge pressure is = 91.52 lb/in²
Explanation:
Given data,
The value of pressure in S.I unit, = 6.31 x 10⁵ N/m²
The conversion formula for SI unit into US Customary Units is given by,
1 N/m² = 1.45 x 10⁻⁴ lb/in²
Using the conversion formula, the new value of pressure becomes,
Pressure = 6.31 x 10⁵ X 1.45 x 10⁻⁴ lb/in²
= 91.52 lb/in²
Hence, the gauge pressure is, ς = 91.52 lb/in²
To convert the absolute pressure of 6.31 × 10^5 N/m² to gauge pressure in lb/in², subtract the atmospheric pressure from the absolute pressure and then convert the gauge pressure from N/m² to lb/in² using the conversion factor. Therefore, the gauge pressure is approximately 76.8 lb/in.².
Explanation:To convert the absolute pressure of 6.31 × 10^5 N/m² to gauge pressure in lb/in², we can use the conversion factor of 1 lb/in.² = 6.90 × 10³ N/m². First, we'll calculate the gauge pressure in N/m² by subtracting the atmospheric pressure (which is 1 atm) from the absolute pressure:
Gauge Pressure = Absolute Pressure - Atmospheric PressureGauge Pressure = 6.31 × 10^5 N/m² - (1.013 × 10^5 N/m²)Gauge Pressure = 5.3 × 10^5 N/m²Next, we'll convert the gauge pressure from N/m² to lb/in²:
Gauge Pressure in lb/in.² = Gauge Pressure in N/m² × Conversion FactorGauge Pressure in lb/in.² = (5.3 × 10^5 N/m²) × (1 lb/in.²/6.90 × 10³ N/m²)Gauge Pressure in lb/in.² ≈ 76.8 lb/in.²Therefore, the gauge pressure is approximately 76.8 lb/in.²
Consider the model above. It represents the electrical force. As r increases, the attractive force decreases. How would this model compare to a model for the force of gravity?
Answer:
As we keep on increasing the radius the value of the gravitation force of attraction decreases and as we decrease the radius the gravitation force increases.
Explanation:
Like the coulombs law of electrostatics, the law of gravitation also depends inversely on the square of the value of r. Therefore, as we keep on increasing the value of r the value of the gravitation force decreases and as we decrease the value of the r the value of gravitation force increases.
Gravitation Force=[tex]\frac{Gm_{1}m_{2} }{r^{2}}[/tex]
Coulombs's Law= [tex]\frac{Kq_{1}q_{2} }{r^{2}}[/tex]
Answer:
The answer is C
Explanation:
I did it on usatestprep and got it right
Which chemical reaction absorbs energy
Answer:
endothermic reactions
Answer:
endothermic reactions
Explanation:
endothermic reactions means the reaction gets super hot while the surrounding area gets colder. (absorbs energy)
exothermic means the surrounding area gets hot while it gets colder. (releases energy)
Question 3 (5 points)
When there is an angle between the force and the displacement, W=F.d cos O.
True
False
True: when there is an angle between force and displacement, [tex]W=Fd cos \theta[/tex]
Explanation:
The work done by a force when pushing/pulling an object is given by the equation
[tex]W=Fd cos \theta[/tex]
where
F is the magnitude of the force
d is the displacement of the object
[tex]\theta[/tex] is the angle between the direction of the force and of the displacement
We have two extreme cases:
- When the force is parallel to the displacement, then [tex]\theta=0^{\circ}[/tex] and [tex]cos \theta = 1[/tex], so the work done is maximum and simply becomes
[tex]W=Fd[/tex]
- When the force is perpendicular to the displacement, then [tex]\theta=90^{\circ}[/tex] and [tex]cos \theta =0[/tex], so the work done is zero.
Learn more about work:
brainly.com/question/6763771
brainly.com/question/6443626
#LearnwithBrainly
A tin can has a volume of 1000cm^3 and a mass of 100g . What mass of lead shot can it carry without sinking in water.
900 grams of lead can be added max to the tin so that it does not sink.
Explanation:
According to the Archimedes principle, an object will not sink in a medium until the density of the object exceeds the density of the medium.
The medium we have is water.
The density of medium(water) is given as ρ° = 1 g/cm³
Density of an object is simply its mass contained per unit volume.
Density = mass/volume
Volume of the tin = v = 1000 cm³
Mass of the tin = m = 100 g
Mass of lead that can be added without sinking = x
Total mass after adding lead in the tin = Mt = m + x
Total density after lead is added to the tin is given as:
ρt = (m+x)/v
Now, according to Archimedes principle, lead can be added to the tin until the density of tin is equal to the density of water.
ρt = ρ°
Mt/v = ρ°
(m + x)/v = ρ°
⇒ (100 + x)/1000 = 1
⇒ 100 + x = 1000
⇒ x = 1000 - 100
x = 900 g
Keyword: Archimedes principle
Learn more about Archimedes principle from https://brainly.com/question/10589409
#learnwithBrainly
Which statements describe ocean currents?
Answer:
Answer: •Currents occur at the surface of and deep within the ocean.
•The Coriolis effect contributes to the direction of current flow.
•Wind direction, the spin of Earth, and differences in temperature
Explanation:
a cart accelerates at 2 m/s^2 when a force of 60 N is applied, what is the mass of the cart?
Answer:
30 kg
Explanation:
Newton's second law:
F = ma
60 N = m (2 m/s²)
m = 30 kg
Answer:
[tex]30\:g[/tex]
Explanation:
Isaac Newton's second law of motion
[tex]\displaystyle ma = F_{net}[/tex]
[tex]\displaystyle \frac{60}{2} = m \\ \\ 30 = m[/tex]
* Now, that bar above 18 is what is known as bar notation, indicating repetition in the digits.
I am joyous to assist you anytime.
By applying a force of 55 N, a pulley system can lift a box with a mass of 20.0 kg. What
is the mechanical advantage of the pulley system?
The mechanical advantage of the pulley is 3.56
Explanation:
The Mechanical Advantage (MA) of a pulley system is given by
[tex]MA=\frac{Load}{Effort}[/tex]
where
Load is the weight of the object lifted
Effort is the force applied in input
For the pulley in this problem, we have:
Effort = 55 N
While the load is the weight of the box of mass m = 20.0 kg:
[tex]Load = mg = (20.0 kg)(9.8 m/s^2)=196 N[/tex]
Substittuing, we find the MA of the pulley:
[tex]MA=\frac{196}{55}=3.56[/tex]
#LearnwithBrainly
One type of entrepreneurial business could be an online business, and the article
lists Amazon as an example. If you get a job tomorrow working at Amazon, does
that make you an entrepreneur? Why or why not?
Answer:
No you would not be an entrepreneur
Explanation:
An entrepreneur is someone who creates a business, and also organize the business affairs. The entrepreneur takes on the biggest financial risk.
Answer:
No, taking a job with Amazon does not make one an entrepreneur
Explanation:
An entrepreneur is an individual that sets up a business or businesses (with the aim of making profit). In any organization, the person or persons that start up the business or businesses are the entrepreneurs while the people employed are the employee of the business/businesses.
Entrepreneurs usually create jobs for the employee and not the other way round (even when the idea could come from the employee).
From the above, it can be deduced that a person who gets a job at Amazon is an employee while the owner of Amazon is the entrepreneur.
a quantity of water is poured into a graduated cylinder, which reads 139 mL. what is the mass of the water in kilograms?
The mass of water is 0.139 kg
Explanation:
The density of a substance is given by the equation
[tex]\rho = \frac{m}{V}[/tex]
where
[tex]\rho[/tex] is the density
m is the mass of the substance
V is its volume
In this problem we have:
V = 139 mL is the volume of water
The density of water is:
[tex]\rho = 1 g/mL[/tex]
Solving the equation for m, we find its mass:
[tex]m=\rho V = (1.0)(139)=139 g[/tex]
And converting into kilograms,
[tex]m=139 g = 0.139 kg[/tex]
Learn more about mass and density:
brainly.com/question/5055270
brainly.com/question/8441651
#LearnwithBrainly
An electron confined on one-dimensional infinite potential well has an energy of 180ev. What its wavelength?
The wavelength is 91.5 pm ( 91.5 Pico meter).
Explanation:
The formula can be expressed below for electron’s energy,
[tex]\text {Energy of electron}=\frac{p^{2}}{2 m}[/tex]
Where,
p = momentum
m= mass of electron
We know, mass of electron = [tex]9.1 \times 10^{-31} \mathrm{kg}[/tex]
Energy of electron, [tex]1 e V=1.6 \times 10^{-19} \mathrm{J}[/tex]
Therefore, [tex]\text { energy of electron, 180 eV }=180 \times 1.6 \times 10^{-19} J[/tex]
By substituting the known values in the equation, we get,
[tex]180 \times 1.6 \times 10^{-19}=\frac{p^{2}}{2 \times 9.1 \times 10^{-31}}[/tex]
[tex]p^{2}=180 \times 1.6 \times 10^{-19} \times 2 \times 9.1 \times 10^{-31}[/tex]
[tex]p^{2}=5241.6 \times 10^{-50}[/tex]
Taking square root, we get
[tex]\text {Momentum, } p=72.399 \times 10^{-25} \mathrm{kg} . \mathrm{m} / \mathrm{s}[/tex]
We know,
[tex]\lambda=\frac{h}{p}[/tex]
Here, h – Planck constant = [tex]6.626 \times 10^{-34} \mathrm{J.s}[/tex]
So, the wavelength would be,
[tex]\lambda=\frac{6.626 \times 10^{-34}}{72.399 \times 10^{-25}}=0.0915 \times 10^{-34+25}=0.0915 \times 10^{-9} \mathrm{m}[/tex]
Adding [tex]10^{-3}[/tex] in both numerator and denominator we get the value as
[tex]\lambda=0.0915 \times 10^{-9} \times \frac{10^{-3}}{10^{-3}}=0.0915 \times 10^{3} \times 10^{-12}=91.5 \mathrm{pm}[/tex]
Where, pm – Pico meter - [tex]10^{-12}[/tex]
Will give brainliest to the correct answer.
Answer:
The acceleration of the car is [tex]1.432 m/s^{2}[/tex]
Explanation:
We are assuming rightward coordinate positive and all quantities are along this direction
We know,
[tex]a = \frac{dv}{dt}[/tex]
where a - acceleration, v=velocity, t=time and x=displacement
multiply by dx in both sides
[tex]adx = \frac{dv}{dt} dx[/tex]
but we know [tex]\frac{dx}{dt} = v[/tex]
Therefore,
[tex]adx = vdv[/tex]
Here we integrate both sides with proper limits
x ranges from 0 to 110 as v ranges from 29 to 34
p = 0, r = 110, q = 29, s = 34
[tex]a\int\limits^r_pdx = \int\limits^s_q {v} \, dv[/tex]
a is given as constant thus can be pulled out of the integration
[tex]a[110-0] = [\frac{34^{2}}{2}- \frac{29^{2}}{2}][/tex]
Therefore,
Accelaration of the car is [tex]1.432 m/s^{2}[/tex]
Note:
Here moving to the right doesn't mean anything significant other than the fact that all quantities are pointing in that direction. Therefore obtained acceleration is also towards the right
If you know equation of motion for constant acceleration as
[tex]v^{2} -u^{2} = 2as[/tex] you can plug in values in this equation to obtain value of a
v - final velocity
u - initial velocity
s - displacement
. Which is the transfer of energy as waves moving through space?
conduction
insulation
convection
radiation
Answer:
Radiation is the answer to your question