Answer: 896J
Explanation:
Given that
Mass of motorcycle = 112kg
kinetic energy = ?
velocity of the motorcycle = 4m/s
Since kinetic energy is the energy possessed by a moving object, and it depends on the mass (m) of the object and the velocity (v) by which it moves. Therefore, the motorcycle has kinetic energy
i.e K.E = 1/2mv^2
KE = 1/2 x 112kg x (4m/s)^2
KE = 0.5 x 112 x 16
KE = 896J
Thus, the motorcycle has 896 joules of kinetic energy.
An electric circuit through which no current flows is known as?
What happens when two waves pass through each other
The interference of the two waves causes its medium to take on a shape that results from the effect of the two individual waves upon the particles of the medium.
A ball is sitting at rest on the floor. What will happen if a balanced force is applied to the ball? *
(1 Point)
It will roll in the direction of the weakest force.
It will roll away from the force.
It will remain at rest.
Select the correct responses to the questions from the drop-down menus.
Which wind belt occurs at about about 5 degrees north and south of the equator?
Which wind belt starts at the horse latitudes and moves toward the poles?
Which winds are found primarily in the tropics?
Answer:
The first answer to the first column is Doldrums, the second is prevailing westerlies, the last answer is trade winds
Explanation:
I got this answer because I did it on the test
The wind belt that occurs at about about 5 degrees north and south of the equator is doldrums.
The wind belt that starts at the horse latitudes and moves toward the poles is the prevailing westerlies.
The winds that are found primarily in the tropics are trade winds.
Doldrums refer to the equitorial region of the Atlantic Ocean that has storms and unpredictable winds.
Prevailing westerlies are the winds that can be found in the middle latitudes which blow from high pressure area towards the pole. Trade winds are the east to west prevailing winds that flow in the equitorial region of the Earth.
Read related link on:
https://brainly.com/question/19100484
Could someone please fill out this document and give it back to me. I'm willing to give 100 points but all answers need to be correct and show really good working out. I really need to pass this assessment or else I will fail physics.
Hi friend! I'm really sorry, but I was only able to complete the first 2 pages. The whole thing was too big, and I have a curfew (bedtime). Also, I'm only in 9th grade, and I am pretty smart for my age, so I tried to figure everything out, but it was still too confusing for me. Honestly, if you just search the formulas/equations for work, power, volts, watts, joules, etc, it will be easier for you. I have included the doc with my answers below, but the rest of it is blank. Also, I recommend double checking my answers, just to make sure that they are not wrong.
I hope this helps!
- sincerelynini
what type of meter would be connected on both sides of the resistor in a circuit
the answer IS NOT "An ammeter, which measures current"
HELP!
How high above the ground would a 500 kg roller coaster car be if it had 61 740 J of
gravitational potential energy?
Answer:
The solved problem is in the photo. Hope it helps.
Which pair of concepts are closely related?
O A. radiation and inertia
B. electric and magnetic forces
C. friction and gravity
D. entropy and momentum
Answer:
I believe it would be C. friction and gravity
Explanation:
They both deal with pulling/pushing objects.
Why is lightning visible before thunder is heard?
A
Sound cannot reflect off surfaces as easily as light.
B
Sound travels slower than light can travel.
C
Sound is not processed by the brain as fast as light.
D
Sound needs a medium to travel through.
Answer:
B
Explanation:
Is an 80 dB sound twice as loud as a 40 dB sound? Explain.
Answer:
Yes.
Explanation:
As decibel is a universal unit, 40Db*2=80Db.
The large piston in a hydraulic lift has an area of 250 cm2. What force must be applied to the small piston with an area of 25 cm2 in order to raise a car of mass 1500 kg?
Explanation:
Given that,
Area of large piston, [tex]A_1=250\ cm^2[/tex]
Area of small piston, [tex]A_2=25\ cm^2[/tex]
Force applied to large piston, [tex]F_1=m_1g=1500\times 10=15000\ N[/tex]
It is required to find the force applied to the small piston. The pressure in each chamber must be equal so, that,
[tex]\dfrac{F_1}{F_2}=\dfrac{A_2}{A_1}[/tex]
F₂ is force applied to smaller piston
[tex]F_2=\dfrac{F_1A_1}{A_2}\\\\F_2=\dfrac{15000\times 250}{25}\\\\F_2=150000\ N\\\\F_2=150\ kN[/tex]
So, the force of 150 kN must be applied to the small piston.
To raise the car using a hydraulic lift, a force of 1500 N must be applied to the small piston.
Explanation:To determine the force needed to raise a car using a hydraulic lift, we can apply the principles of Pascal's law. According to Pascal's law, the pressure in a fluid is transmitted equally in all directions. In this case, the pressure exerted on the larger piston is equal to the pressure exerted on the smaller piston. We can use the equation:
F1/A1 = F2/A2
Where F1 is the unknown force applied to the small piston, A1 is the cross-sectional area of the small piston, F2 is the weight of the car (mg), and A2 is the cross-sectional area of the large piston.
Given that A1 = 25 cm^2, A2 = 250 cm^2, and the mass of the car is 1500 kg, we can solve for F1:
F1 = (F2 * A1) / A2
Substituting the known values:
F1 = (1500 kg * 9.8 m/s^2 * 0.0025 m^2) / 0.025 m^2 = 1500 N.
Learn more about Hydraulic lift here:https://brainly.com/question/20876092
#SPJ11
4. Solid ‘X’ turns into a liquid at 80 0C and into a gas at 140 0C. Describe the changes in the
particles of X when it is heated from
a. 70 0C to 85 0C
Answer:
Explanation:
The melting point of the solid is 80°C
Vapor point of the liquid is 140°C
What happens to particles of X when heated from 70°C to 85°C?
Firstly, there would be a phase change from solid to liquid. Below the melting point, a substance will exist as a solid. With increase in thermal energy inputted by heat, as the temperature climbs above the melting point, it changes to the liquid. When the solid begins to heat up, the particles of X starts vibrating about their fixed point. At they melting point, they break lose and flow to form a liquid. The particles will have more kinetic energy.Problem
Which of the following statements is true of a body that accelerates uniformly? Explain your
answer.
a. Its rate of change of position with time remains constant.
b. Its position changes by the same amount in equal time intervals.
c. Its velocity increases by increasing amounts in equal time intervals.
d. Its rate of change of velocity with time remains constant.
Explanation:
The acceleration of a body is defined as the rate of change of velocity per unit time. Its mathematical form is given by :
[tex]a=\dfrac{v-u}{t}[/tex]
Here,
u is initial speed of a body
v is final speed
t is time taken
Uniform acceleration means that the velocity of an object changes by an equal amount in every equal time period. Hence, the correct option is (c) " Its velocity increases by increasing amounts in equal time intervals".
4. Identify Problems A student is describing a longitudinal wave in his notebook. He
writes down "The distance between crests is 3 cm." What is wrong with what the
student recorded?
Answer:
"The distance between crests is 3 cm."
Explanation:
If he writes down "The distance between crests is 3 cm."
That means he is describing the wavelength of a wave and not longitudinal wave. He ought to write something about " direction "
Longitudinal waves are waves in which the displacement of the medium is in the same direction as, or parallel to, the direction of propagation of the wave. While
Wavelength is the distance between the two successfully Crest or trough
If the time is 0.2 seconds and the speed is 1500m/s what is the distance
Answer:
300m
Explanation:
D=S×T
D=1500×0.2
What is meant by Compression and Rarefaction of a longitudinal wave?
Which of the following statements describes an actual orbit?
O
A. The Moon is a satellite of Earth.
O
B. The Sun is a satellite of Earth.
O
C. Earth is a satellite of the planet Jupiter.
O
D. The planet Jupiter is a satellite of Earth.
The Moon is a satellite of Earth. This statement describes an actual orbit. Hence, option (A) is correct.
What is orbit?An orbit is the curved path taken by an object in celestial mechanics, such as the path taken by a planet around a star, a natural satellite around a planet, or an artificial satellite around an object or location in space, such as a planet, moon, asteroid, or Lagrange point.
Typically, the term "orbit" refers to a trajectory that repeats itself on a regular basis, though it can also apply to a non-repeating trajectory. According to Kepler's rules of planetary motion, planets and satellites roughly follow elliptic orbits, with the center of mass orbiting at a focal point of the ellipse.
Hence, the Moon is a satellite of Earth. This statement describes an actual orbit.
Learn more about orbital here:
https://brainly.com/question/1482725
#SPJ5
Select the correct answer.
What is the electric field experienced by a charged balloon if the charge on the balloon is 9.4 x 10 coulombs and the force it experiences is 8.2
* 10^-2 newtons?
Answer:
8.37×10⁻⁴ N/C
Explanation:
Electric Field: This is the ratio of electrostatic force to electric charge. The S.I unit of electric field is N/C.
From the question, the expression for electric field is given as,
E = F/Q.......................... Equation 1
Where E = Electric Field, F = force experienced by the charged balloon, Q = Charge on the balloon.
Given: F = 8.2×10⁻² Newton, Q = 9.8×10 Coulombs = 98 Coulombs
Substitute these values into equation 1
E = 8.2×10⁻² /98
E = 8.37×10⁻⁴ N/C
Hence the Electric Field of the charged balloon = 8.37×10⁻⁴ N/C
Answer:
8.36*10^-4N/C
Explanation:
To find the electric field you use the following formula:
[tex]F=qE\\\\E=\frac{F}{q}[/tex]
F: electric force = 8.2*10^-2 N
q: charge of the balloon = 9.4*10 C
By replacing F and q you obtain:
[tex]E=\frac{8.2*10^{-2}N}{9.4*10}=8.36*10^{-4}\frac{N}{C}[/tex]
hence, the electric field is 8.36*10^-4N/C
How does lighting work?
Answer:
by power and electricity
Explanation:
Answer: Lighter, positively charged particles form at the top of the cloud. Heavier, negatively charged particles sink to the bottom of the cloud. When the positive and negative charges grow large enough, a giant spark - lightning - occurs between the two charges within the cloud.
Explanation:
Question 4 of 10
2 Points
Which of the following is a cost of urban development?
O
A. Habitat fragmentation
O B. Entertainment
O C. Employment
O
D. Cultural centers
What is it
Habitat fragmentation is a cost of urban development.
Option: A
Explanation:
Though from the view point or perspective of up gradation and development urban development is much needed but in cost of habitat fragmentation which feels very bitter. As habitat fragmentation leads to the loss of habitat, disruption of ecological cycle and environmental equilibrium.
Actually in the name of urban development we the human use our bread giver environment in a wrong way which causes natural disasters in long run. Animals become endangered , vulnerable and extinct with passage of time. Because they forced to enter into human settlements.
Answer:
A
Explanation:
Which process requires the addition of energy to water?
Water must absorb energy in order to melt, evaporate, or get warmer.
A 600 kg car is at rest, and then accelerates to 5 m/s.
What is its original kinetic energy?
What is its final kinetic energy?
How much work was used?
Answer:
0
7500J
7500J
Explanation:
Given parameters:
Mass of car = 600kg
Velocity = 5m/s
Unknown:
Original kinetic energy = ?
Final kinetic energy = ?
Work used = ?
Solution:
The kinetic energy of a body is the energy due to the motion of a body.
It can be solve mathematically using expression below;
K.E = [tex]\frac{1}{2}[/tex] m v²
where m is mass
v is velocity
original kinetic energy;
The car started at rest and v = 0, therefore K.E = 0
Final kinetic energy;
K.E = [tex]\frac{1}{2}[/tex] x 600 x 5² = 7500J
Work done:
Work done = Final K.E - Initial K.E = 7500 - 0 = 7500J
Answer:
0 ; 7500; 7500
Explanation:
Its correct I just completed it.
What type of relationship does this graph show?
Mass vs. Acceleration
O
an inverse relationship
a positive relationship
a direct relationship
an independent relationship
O
Acceleration (mis)
0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
Mass (kg)
The correct answer is an inverse relationship.
This is because according to the graph as the mass increases the acceleration decreases as shown by the downward curve.
what is one benefit of lifelong physical activity?
Final answer:
Lifelong physical activity provides multiple health benefits, including cardiovascular and muscular fitness, improved bone density, cognitive function, and weight management, which contribute to a better quality of life and extended life expectancy.
Explanation:
One significant benefit of lifelong physical activity is the improvement of overall health, which manifests in multiple dimensions. Engaging in physical activity from a young age helps in maintaining cardiovascular and muscular fitness, improving bone density and strength, enhancing cognitive function, and aiding in weight management. Moreover, regular exercise contributes to improved quality of life and can extend life expectancy.
For instance, older adults can experience a lower risk of falls and related injuries, while individuals of all ages can enjoy benefits such as reduced risk factors for cardiovascular disease, hypertension, obesity, and certain types of cancer. Additionally, physical activity plays a protective role against mental health issues like depression, due to its potential to increase the synthesis of natural euphoriants in the brain. Crucially, even those with chronic conditions can find physical activity more beneficial than harmful, emphasizing the universal importance of an active lifestyle.
What types of properties does light have
Answer:
In isotropic substances, there are only two optical properties that can be determined. One of these is the absorption color, as discussed above. The other is the refractive index. Tables of refractive indices for isotropic minerals, list only the refractive index for one wavelength of light.
Explanation:
A biker racer is moving 17km/he in a southernly direction. This is an example of_____
Answer:
This is an example of SPEED.
Answer: velocity
Explanation:
PLZ HELP ME i don’t get this
Explanation:
(i) Height of tree, h = 4 m
Mass of Ninja, m = 30 kg
The gravitational potential energy on the top branch of the tree is given by :
[tex]P=mgh[/tex]
g is acceleration due to gravity
[tex]P=30\ kg\times 9.8\ m/s^2\times 4\ m\\\\P=1176\ J[/tex]
(ii) If he were at a height of 2 meters from the ground, its potential energy will be :
[tex]P=mgh[/tex]
g is acceleration due to gravity
[tex]P=30\ kg\times 9.8\ m/s^2\times 2\ m\\\\P=588\ J[/tex]
Therefore, this is the required explanation.
a. If you set a cannonball to 1500 m/s, what happens? Explain why you think it moves this way.
Answer:
I beleive it would shoot very far up into the sky
Explanation:
Answer:It slows down and eventually gravity pulls it to ground and it stops
Explanation:
Air resistance slows it down
The highest occupiable floor of any building is in the Sears Tower in Chicago. The elevators of the central tower of the building lift passengers 436.0 m above street level. If a continuous forces of 22310 N is exerted on one of these elevator cars as it travels from the ground to the top floor, how much work is done on the elevator car by the elevator's lifting mechanism?
Answer:
9727160J
Explanation:
Given parameters:
Height of elevator rise = 436m
Force exerted = 22310N
Unknown:
Work done by the elevator lifting mechanism = ?
Solution:
The work done by a body is the force applied to move a body in a specific direction;
Work done = force x distance moved
In this case, the force and distance moved is provided already;
Work done = 22310 x 436 = 9727160J
The work done on the elevator car by the elevator's lifting mechanism is calculated using the work formula which is the product of the exerted force and the distance travelled, resulting in a total work of 9,731,160 joules.
Explanation:The question requires us to calculate the work done on an elevator car by the elevator's lifting mechanism. To find this out, we use the work formula:
Work (W) = Force (F) × Distance (d)
Given:
Force exerted on the elevator car, F = 22310 N Distance the elevator travels, d = 436.0 m
To calculate the work done, we multiply the force by the distance:
W = F × d
W = 22310 N × 436.0 m
W = 9,731,160 J
The work done by the elevator's lifting mechanism is 9,731,160 joules (J).
How to atoms behave in non-magnetic items?
Answer:
By altering the quantum interactions of the electrons in the atoms of a metal's atoms, scientists from the University of Leeds have generated magnetism in metals that aren’t normally magnetic.
Explanation: