A net force of 200 N acts on a 100-kg boulder, and a force of the same magnitude acts on a 100-g pebble. Is the change of the boulder’s momentum in one second greater than, less than, or equal to the change of the pebble’s momentum in the same time period?

Explanation:

It is given that,

Mass of the passenger, m = 75 kg

Acceleration of the rocket, [tex]a=49\ m/s^2[/tex]

(a) The horizontal component of the force the seat exerts against his body is given by using Newton's second law of motion as :

F = m a

[tex]F=75\ kg\times 49\ m/s^2[/tex]

F = 3675 N

Ratio, [tex]R=\dfrac{F}{W}[/tex]

[tex]R=\dfrac{3675}{75\times 9.8}=5[/tex]

So, the ratio between the horizontal force and the weight is 5 : 1.

(b) The magnitude of total force the seat exerts against his body is F' i.e.

[tex]F'=\sqrt{F^2+W^2}[/tex]

[tex]F'=\sqrt{(3675)^2+(75\times 9.8)^2}[/tex]

F' = 3747.7 N

The direction of force is calculated as :

[tex]\theta=tan^{-1}(\dfrac{W}{F})[/tex]

[tex]\theta=tan^{-1}(\dfrac{1}{5})[/tex]

[tex]\theta=11.3^{\circ}[/tex]

Hence, this is the required solution.

The horizontal component of the force the seat exerts against the passenger's body is 3675 N. The ratio of this force to the passenger's weight is 5. The total force the seat exerts has a magnitude of 3793 N.

(a) To calculate the horizontal component of the force the seat exerts against the passenger's body, we can use Newton's second law, which states that force is equal to mass times acceleration. In this case, the mass of the passenger is 75.0 kg and the acceleration of the rocket sled is 49.0 m/s2. So the force exerted by the seat is:

Force = mass * acceleration

Force = 75.0 kg * 49.0 m/s2

Force = 3675 N

Now let's compare this force to the passenger's weight. The weight of an object is given by the formula:

Weight = mass * gravitational acceleration

Weight = 75.0 kg * 9.8 m/s2

Weight = 735 N

To find the ratio, we divide the force exerted by the seat by the weight of the passenger:

Ratio = Force / Weight

Ratio = 3675 N / 735 N

Ratio = 5

(b) The total force the seat exerts against the passenger's body has both a horizontal and vertical component. The direction of the total force is the same as the direction of the acceleration of the rocket sled. The magnitude of the total force can be found using the Pythagorean theorem:

Total Force = √(horizontal component2 + vertical component2)

Total Force = √(36752 + 7352)

Total Force = 3793 N

https://brainly.com/question/13191643

#SPJ11

Answer:

299.51 m/s

Explanation:

m = mass of the bullet = 45 g = 0.045 kg

M = mass of the block = 1.55 kg

v = muzzle speed of the bullet

V = speed of bullet-block combination after the collision

μ = Coefficient of friction between the block and the surface = 0.28

d = distance traveled by the block = 13 m

V' = final speed of the bullet-block combination = 0 m/s

acceleration of the bullet-block combination due to frictional force is given as

a = - μg

using the kinematics equation

V'² = V² + 2 a d

0² = V² + 2 (- μg) d

0 = V² - 2 (μg) d

0 = V² - 2 (0.28) (9.8) (13)

V = 8.45 m/s

Using conservation of momentum for collision between bullet and block

mv = (M + m) V

(0.045) v = (1.55 + 0.045) (8.45)

v = 299.51 m/s

Answer:

p = 8N/mm2

Explanation:

given data ;

diameter of cylinder =  150 mm

thickness of cylinder = 6 mm

maximum shear stress =  25 MPa

we know that

hoop stress is given as =[tex]\frac{pd}{2t}[/tex]

axial stress is given as =[tex]\frac{pd}{4t}[/tex]

maximum shear stress = (hoop stress - axial stress)/2

putting both stress value to get required pressure

[tex]25 = \frac{ \frac{pd}{2t} -\frac{pd}{4t}}{2}[/tex]

[tex]25 = \frac{pd}{8t}[/tex]

t = 6 mm

d = 150 mm

therefore we have pressure

p = 8N/mm2

Answer:

6593.4

Explanation:

wavelength, λ = 910 nm = 910 x 10^-9 m

Speed of laser = 3 x 10^8 m/s

t = 20 pico seconds

Distance traveled by laser in this time, d = c x t

d = 3 x 10^8 x 20 x 10^-12 = 6 x 10^-3 m

number of wavelengths, n = d / λ

n = (6 x 10^-3) / (910 x 10^-9)

n = 6593.4

Answer:

The current in wire 3 is 0.25 A.

Explanation:

It is given that, three wires meet at a junction.

Current in wire 1, I₁ = 0.4 A

Current in wire 2, I₂ = -0.65 A  (out of the junction)

We need to find the magnitude of the current in wire 3 (I₃). Applying Kirchhoff's current law which states that the sum of current in the circuit at a junction is equal to zero.

[tex]I_1+I_2+I_3=0[/tex]

[tex]I_3=-(I_2+I_1)[/tex]

[tex]I_3=-(-0.65+0.4)\ A[/tex]

I₃ = 0.25 A

So, the current in wire 3 is 0.25 A. Hence, this is the required solution.

Using the principle of Kirchhoff's junction rule, we calculate the current in Wire 3 as being 0.25 amperes.

The understanding of this question relies on the principle of Kirchhoff's junction rule in Physics, which states the sum of currents entering a junction equals the sum of currents leaving the junction. In this case scenario, Wire 1 has a current of 0.40 A into the junction and wire 2 has a current of 0.65 A out of the junction. The current of Wire 3 can be solved via the equation: I1 + I3 = I2, where I1, I2, and I3 are the currents on Wires 1, 2, and 3 respectively. Plugging in the given values, we get: 0.40 A + I3 = 0.65 A. Solving the equation for I3, we find that I3 = 0.25 A. Hence, the magnitude of the current in Wire 3 is 0.25 A.

https://brainly.com/question/2264542

#SPJ11

Answer:

t=4.2 years

Explanation:

velocity v= 0.96c

destination star distance = 14.4 light year

According to the theory of relativity length contraction

[tex]l= \frac{l_0}{\sqrt{1-\frac{v^2}{c^2}}}[/tex]

[tex]l_0= l{\sqrt{1-\frac{v^2}{c^2}}}[/tex]

putting values we get

[tex]l_0= 14.4{\sqrt{1-\frac{(0.96c)^2}{c^2}}}[/tex]

[tex]l_0= 4.032 light years[/tex]

now distance the trip covers

D= vt

[tex]4.032\times c= 0.96c\times t[/tex]

[tex]t= \frac{4.032c}{0.96c}[/tex]

t= 4.2 years

so the trip will take 4.2 years

Answer:

a)

492 kJ

b)

Consistent

Explanation:

Q = Heat stored by woman from food = 600 k J

η = Efficiency of woman = 18% = 0.18

Q' = heat transferred to the environment

heat transferred to the environment is given as

Q' = (1 - η) Q

Inserting the values

Q' = (1 - 0.18) (600)

Q' = 492 kJ

b)

Yes the amount of heat transfer is consistent. The process of sweating produces the heat and keeps the body warm  

A woman climbing the Washington Monument metabolizes food energy with 18% efficiency, meaning 82% of the energy is lost as heat. When we calculate this value, we find that 492 kJ of energy is released as heat, which is consistent with the fact that people quickly warm up when exercising.

The woman climbing the Washington Monument metabolizes 6.00×10² kJ of food energy with an efficiency of 18%. This implies that only 18% of the energy consumed is used for performing work, while the remaining (82%) is lost as heat to the environment.

To calculate the energy lost as heat:

The released heat of 492 kJ is consistent with the fact that a person quickly warms up when exercising, because a significant portion of the body's metabolic energy is lost as heat due to inefficiencies in converting energy from food into work.

https://brainly.com/question/18766797

#SPJ3

Answer : The rate law for the overall reaction is, [tex]R=\frac{K[A]^2[D]}{[C]}[/tex]

Explanation :

As we are given the mechanism for the reaction :

Step 1 : [tex]2A\rightleftharpoons B+C[/tex]    (equilibrium)

Step 2 : [tex]B+D\rightarrow E[/tex]     (slow)

Overall reaction : [tex]2A+D\rightarrow C+E[/tex]

First we have to determine the equilibrium constant from step 1.

The expression for equilibrium constant will be,

[tex]K'=\frac{[B][C]}{[A]^2}[/tex]

Form this, the value of [B] is,

[tex][B]=\frac{K'[A]^2}{[C]}[/tex]       ............(1)

Now we have to determine the rate law from the slow step 2.

The expression for law will be,

[tex]Rate=K''[B][D][/tex]       .............(2)

Now put equation 1 in 2, we get:

[tex]Rate=K''\frac{K'[A]^2}{[C]}[D][/tex]

[tex]Rate=\frac{K[A]^2[D]}{[C]}[/tex]

Therefore, the rate law for the overall reaction is, [tex]R=\frac{K[A]^2[D]}{[C]}[/tex]

The rate law for the reaction is obtained from the slow step (Step 2) and modified with information from the fast equilibrium step (Step 1), considering B as an intermediate reactant. The overall rate law becomes: Rate = k [ ((k1/k-1)[A]^2/[C]) ][D]

The rate law for a reaction is established based upon the rate-determining (slowest) step of the reaction. So, first, we identify the slow step of the reaction. From the information given, we can see that the slow step is Step 2, with reactants B and D forming product E.

The rate law for this step of the reaction is written as: Rate = k [B][D], where k is the rate constant for this reaction and [B] and [D] are the concentrations of reactants B and D respectively.

However, reactant B is an intermediate since it doesn’t appear in the overall reaction. So, the rate of formation of B in the fast equilibrium Step 1 becomes important. Here, B is produced from reactant A. The forward and backward rates are equal at equilibrium. So, the rate law for Step 1 could be written as: Rate = k1[A]^2 = k-1[B][C], giving us [B]= (k1/k-1)[A]^2/[C],

Substituting [B] in the rate law for step 2, we obtain the rate law for the overall reaction as: Rate = k [ ((k1/k-1)[A]^2/[C]) ][D], where k is the rate constant for the slow step and k1 and k-1 are the rate constants for the forward and reverse reactions of Step 1.

https://brainly.com/question/35884538

#SPJ11

Answer:

[tex]N = 8.1 \times 10^{10}[/tex]

Explanation:

Initial charge on the rod is

[tex]Q_i = 14 nC[/tex]

final charge on the rod is

[tex]Q_f = 1 nC[/tex]

now the charge transferred from to the sphere is given as

[tex]\Delta Q = Q_i - Q_f[/tex]

[tex]\Delta Q = 14 - 1 = 13 nC[/tex]

now we also know that

Q = Ne

so number of particles transferred is

[tex]N = \frac{\Delta Q}{e}[/tex]

[tex]N = \frac{13 \times 10^{-9}}{1.6 \times 10^{-19}}[/tex]

[tex]N = 8.1 \times 10^{10}[/tex]

When the charged plastic rod touches the metal sphere, it transfers around 13 nC of charge to the sphere. This amounts to about 8.125 x 10^10 electrons, as each electron carries a charge of approximately -1.6 x 10^-19 C.

When the charged plastic rod touches the metal sphere, charge transfer occurs until both objects have the same charge. Initially, the plastic rod had a charge of -14 nC and after touching it had a charge -1.0 nC, which means that 13 nC was transferred to the metal sphere.

The elementary charge (charge of an electron) is approximately -1.6 x 10^-19 C. Therefore, the number of electrons transferred would be the total transferred charge divided by the charge of one electron, which results in approximately 8.125 x 10^10 electrons.

The charge is negative indicating electrons, which have negative charge, were transferred.

https://brainly.com/question/31871736

#SPJ6

Using a formula linking initial and final angular velocities, angular acceleration, and total angle, the final angular velocity can be obtained. Multiplying the final angular velocity and radius gives the final linear velocity. Angular acceleration and linear acceleration on the rim of a wheel are related by their radius.

Given the angular acceleration, a, the number of revolutions, and the radius of the wheel, r, you can determine the angular velocity at the end of 2 revolutions using the formula w_f = sqrt(w_i^2 + 2*a*θ), where w_i is the initial angular velocity, w_f is the final angular velocity, a is angular acceleration, and θ is the total angle swept out in radians. The angular velocity can then be used to find the final linear velocity, v = r*w_f.

Angular acceleration is directly given by a = α*r, where α is angular acceleration and r is the radius. Angular acceleration is also related to the linear (tangential) acceleration, a_t, by a = r*α, where α is angular acceleration and r is the radius. Tangential acceleration involves not only changes in speed (which causes tangential acceleration) but also changes in direction (which causes radial or centripetal acceleration).

https://brainly.com/question/30238727

#SPJ12

Answer :

The time is [tex]1\times10^{5}\ yrs[/tex]

(B) is correct option.

Explanation :

Given that,

Diameter = 100000 light year

Velocity = 0.99 c

We need to calculate the time

Using formula of time

[tex]t = \dfrac{d}{v}[/tex]

Put the value into the formula

[tex]t =\dfrac{100000 c}{0.99c}[/tex]

[tex]t =1\times10^{5}\ yrs[/tex]

Hence, The time is [tex]1\times10^{5}\ yrs[/tex]

Answer:

speed of boat as

[tex]v_b = 10 mph[/tex]

river speed is given as

[tex]v_r = 2 mph[/tex]

Explanation:

When boat is moving down stream then in that case net resultant speed of the boat is given as

since the boat and river is in same direction so we will have

[tex]v_1 = v_r + v_b[/tex]

Now when boat moves upstream then in that case the net speed of the boat is opposite to the speed of the river

so here we have

[tex]v_2 = v_b - v_r[/tex]

as we know when boat is in downstream then in that case it covers 24 miles in 2 hours

[tex]v_1 = \frac{24}{2} = 12 mph[/tex]

also when it moves in upstream then it covers same distance in 3 hours of time

[tex]v_2 = \frac{24}{3} = 8 mph[/tex]

[tex]v_b + v_r = 12 mph[/tex]

[tex]v_b - v_r = 8 mph[/tex]

so we have speed of boat as

[tex]v_b = 10 mph[/tex]

river speed is given as

[tex]v_r = 2 mph[/tex]

The rate of the boat in still water is 10 mph

The rate of the current is 2 mph

Acceleration is rate of change of velocity.

[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]

[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]

a = acceleration (m / s²)v = final velocity (m / s)

u = initial velocity (m / s)

t = time taken (s)

d = distance (m)

Let us now tackle the problem!

Given:

distance covered = d = 24 miles

time for driving down the river = td = 2 hours

time for driving up the river = tu = 3 hours

Unknown:

velocity of the boat in still water = vs = ?

velocity of the current = vc = ?

Solution:

When Marcus drive his boat down the river , the velocity of the boat is in the same direction to the velocity of the current.

[tex]v_s + v_c = \frac{d}{t_d}[/tex]

[tex]v_s + v_c = \frac{24}{2}[/tex]

[tex]v_s + v_c = 12[/tex]

[tex]v_s = 12 - v_c[/tex] → Equation 1

When Marcus drive his boat up the river , the velocity of the boat is in the opposite direction to the velocity of the current.

[tex]v_s - v_c = \frac{d}{t_d}[/tex]

[tex]v_s - v_c = \frac{24}{3}[/tex]

[tex]v_s - v_c = 8[/tex]

[tex]12 - v_c - v_c = 8[/tex] ← Equation 1

[tex]12 - 2v_c = 8[/tex]

[tex]2v_c = 12 - 8[/tex]

[tex]2v_c = 4[/tex]

[tex]v_c = 4 \div 2[/tex]

[tex]\large {\boxed {v_c = 2 ~ mph} }[/tex]

[tex]v_s = 12 - v_c[/tex]

[tex]v_s = 12 - 2[/tex]

[tex]\large {\boxed {v_s = 10 ~ mph} }[/tex]

Grade: High School

Subject: Physics

Chapter: Kinematics

Keywords: Velocity , Driver , Car , Deceleration , Acceleration , Obstacle , Speed , Time , Rate

Answer:

Time of race  = 10.18 s

Explanation:

She keeps this acceleration for 17 m and then maintains the velocity for the remainder of the 100-m dash

Time to travel 17 m can be calculated

         s = ut + 0.5at²

         17 = 0 x t + 0.5 x 3.89 x t²

          t = 2.96 s

Velocity after 2.96 seconds

          v = 3.89 x 2.96 = 11.50 m/s

Remaining distance = 100 - 17 = 83 m

Time required to cover 83 m with a speed of 11.50 m/s

          [tex]t=\frac{83}{11.50}=7.22s[/tex]

Time of race = 2.96 + 7.22 = 10.18 s

Final answer:

Direct current (DC) is the flow of electric current in only one direction. According to the electron flow convention, the current flows from the positive terminal to the negative terminal.

Explanation:

Direct current (DC) is the flow of electric current in only one direction. It refers to systems where the source voltage is constant. The direction of current flow in a direct current circuit is from the positive terminal to the negative terminal. This is according to the electron flow convention, where the movement of negative charges (electrons) is considered as the flow of current.

Final answer:

The question involves calculating the individual masses of two objects that collectively weigh 5.09 kg and attract each other with a gravitational force of 0.98 x 10^-8 N, separated by 19.5 cm. The gravitational formula F = G×(m1×m2)/r^2 and a system of equations are used to find the solution.

Explanation:

The student's question is about determining the mass of two objects that attract each other with a known gravitational force when separated by a certain distance. The given force is 0.98 x 10-8 N, and the total mass of the two objects is 5.09 kg. The distance between them is 19.5 cm (or 0.195 m in SI units).

To solve this problem, we'll use the formula for the gravitational force between two masses, which is:

F = G×(m1×m2)/r2,

where:

Final answer:

The angle a vector makes with the positive x-axis can be found using the cosine ratio; the angle is approximately 58.2 degrees for the vector with a magnitude of 25 m and an x-component of 12 m.

Explanation:

To determine the angle a vector makes with the positive x-axis, we can use trigonometry since we have the magnitude of the vector and the length of the x-component. Specifically, the cosine of the angle (θ) that the vector makes with the x-axis is equal to the x-component divided by the magnitude of the vector.

Here is the formula:

cos(θ) = (x-component) / (magnitude)

By substituting the given values:

cos(θ) = 12 m / 25 m

Now calculate the angle:

θ = cos⁻¹(12/25)

θ = 58.2° (approx.)

Therefore, the vector makes an angle of approximately 58.2 degrees with the positive x-axis.

Answer:

4.08 x 10⁻¹⁵ m

Explanation:

r₀ = constant of proportionality = 1.3 x 10⁻¹⁵ m

r = radius of the nucleus 31P = ?

A = mass number of the nucleus 31P = 31

Radius of the nucleus is given as

[tex]r=r_{o}A^{\frac{1}{3}}[/tex]

Inserting the values

[tex]r=(1.3\times 10^{-15})(31)^{\frac{1}{3}}[/tex]

[tex]r=(1.3\times 10^{-15})(3.14)[/tex]

r = 4.08 x 10⁻¹⁵ m

Answer: A) Quenching

Hope this helps

Answer:

6.44 × 10^10 N/C

Explanation:

Electric field due to the ring on its axis is given by

E = K q r / (r^2 + x^2)^3/2

Where r be the radius of ring and x be the distance of point from the centre of ring and q be the charge on ring.

r = 0.25 m, x = 0.5 m, q = 5 C

K = 9 × 10^9 Nm^2/C^2

E = 9 × 10^9 × 5 × 0.25 / (0.0625 + 0.25)^3/2

E = 6.44 × 10^10 N/C

Answer:

Sagittarius

Explanation:

The center of the Milky Way galaxy lies in the direction of the Sagittarius constellation, about 26,000 light-years away.

The center of the Milky Way galaxy is in the direction of the Sagittarius constellation and is about 26,000 light-years away from us.

The center of the Milky Way galaxy lies in the direction of the Sagittarius constellation and is approximately 26,000 light-years away. When we look towards Sagittarius, we are looking towards the densest part of the Milky Way, which is why it appears brighter in the night sky.

A light-year, by definition, is the distance that light can travel in one year. Hence, saying that the center of the Milky Way is 26,000 light-years away means it would take 26,000 years for the light from the center of the galaxy to reach us.

https://brainly.com/question/17606059

#SPJ6

Answer:

4.665×10⁻¹¹ N

Explanation:

Intensity of solar radiation=I=1.4×10³ W/m²

Area of panel=A=5.0 m²

speed of sound=c=3×10⁸ m/s

[tex]P_t=\text {Total\ Solar\ Radiation\ Pressure}[/tex]

[tex]P_t=2\frac{I}{c}\\\Rightarrow P_t=2\frac{1.4\times 10^{-3}}{3\times 10^{8}}\\\Rightarrow P_t=0.933\times 10^{-11}[/tex]

∴Total Solar Radiation Pressure=0.933×10⁻¹¹ Ws/m³

Force= Pressure×Area

Force=0.933×10⁻¹¹×5

Force=4.665×10⁻¹¹ Ws/m=4.665×10⁻¹¹ N

∴Force is exerted by solar radiation impinging normally on a perfectly reflecting panel of an artificial satellite orbiting the earth is 4.665×10⁻¹¹ N

The force exerted by solar radiation on the panel is 7.0 × 10³ N.

The force exerted by solar radiation can be calculated using the formula: force = power/area. In this case, the power is 1.4 × 10³ W/m² and the area is 5.0 m². Substituting these values in, the force exerted by solar radiation on the panel is: force = (1.4 × 10³ W/m²) x (5.0 m²) = 7.0 × 10³ N.

https://brainly.com/question/32310977

#SPJ3

Answer:

here the coil must be oriented in such a way that its plane is perpendicular to the magnetic field

Explanation:

As we know by Faraday's law of electromagnetic induction

Rate of change in magnetic flux will induce EMF in the coil

so here we will have

[tex]EMF = \frac{d\phi}{dt}[/tex]

here we know that

[tex]\phi = NB.A[/tex]

now if the magnetic flux will change with time then it will induce EMF in the coil

[tex]EMF = N\frac{d}{dt}(B.A)[/tex]

so here induced EMF will be zero in the coil if the flux linked with the coil will remain constant

so here the coil must be oriented in such a way that its plane is perpendicular to the magnetic field

In such a way when coil will rotate then the flux linked with the coil will remains constant and there will be no induced EMF in it

To have zero induced emf in a circular loop rotating in a magnetic field, the loop's axis of rotation should be parallel to the magnetic field lines.

The orientation of the loop's axis of rotation must be parallel to the magnetic field lines in a region where a uniform magnetic field points straight down for the induced emf to be zero. When the loop's axis is perpendicular to the magnetic field, the maximum emf is induced. Thus, to minimize the induced emf, the axis should be parallel to the magnetic field.

I = 28.6mA.

The magnetic field in the center of a solenoid is given by:

B = μ₀NI/L

Clear I from the equation above, we obtain:

I = BL/μ₀N

With B = 1.00 x 10⁻⁴T, L = 0.42m, μ₀ = 4π x 10⁻⁷T.m/A  and N = 1170turns

I = [(1.00 x 10⁻⁴T)(0.42m)]/[(4π x 10⁻⁷T.m/A)(1170turns)]

I = 0.0286A

I = 28.6mA

Answer:

The energy transferred is 2.93 MJ.

Explanation:

Given that,

Time = 1 h = 3600 s

Area[tex]A = 1.6\times4.00[/tex]

Width [tex]\Delta x=0.20 m[/tex]

Temperature [tex] T_{1}=20^{\circ}\ C[/tex]

[tex]T_{2}=5^{\circ}\ C[/tex]

For concrete wall,

The thermal conductivity

k = 1.7 W/mK

Using Fourier's law

[tex]Q=kA\dfrac{dt}{\Delta x}[/tex]

Where, A = area

[tex]\Delta x[/tex] = width

[tex]\Delta t[/tex] = change in temperature

k = thermal conductivity

Put the value into the formula

[tex]Q=1.7\times 1.6\times 4.00\times\dfrac{15}{0.20}[/tex]

[tex]Q=816\ W[/tex]

The energy transferred in 1 hour

[tex]E = Q\times t[/tex]

[tex]E=816\times3600[/tex]

[tex]E=2937600[/tex]

[tex]E = 2.93\times10^{6}\ J[/tex]

[tex]E = 2.93\ MJ[/tex]

Hence, The energy transferred is 2.93 MJ.

Answer:16.096

Explanation:

Given

mass of dog[tex]\left ( m_d\right )=10kg[/tex]

mass of boat[tex]\left ( m_b\right )=46kg[/tex]

distance moved by dog relative to ground=[tex]x_d[/tex]

distance moved by boat relative to ground=[tex]x_b[/tex]

Distance moved by dog relative to boat=7.8m

There no net force on the system therefore centre of mass of system remains at its position

0=[tex]m_d\times x_d+m_b\dot x_b[/tex]

0=[tex]10\times x_d+46\dot x_b[/tex]

[tex]x_d=-4.6x_b[/tex]

i.e. boat will move opposite to the direction of dog

Now

[tex]|x_d|+|x_b|=7.8[/tex]

substituting[tex] x_d [/tex]value

[tex]5.6|x_b|=7.8[/tex]

[tex]|x_b|=1.392m[/tex]

[tex]|x_d|=6.4032m[/tex]

now the dog is  22.5-6.403=16.096m from shore

The distance from the shore after the dog walks on the boat is calculated using the conservation of momentum. Since there are no external forces, the center of mass of the dog-boat system must stay the same. After the dog walks towards the shore, we determine the boat's movement in the opposite direction and calculate the dog's final distance from the shore.

To solve how far the dog is from the shore after walking on the boat, we need to apply the law of conservation of momentum. Since there's no external force acting on the system (the dog plus the boat), the center of mass of the system will not move. Initially, the center of mass is stationary, and it should remain so as the dog walks.

We can calculate the initial position of the center of mass (CM) using the formula:

CM = (m × dog_position + M × boat_center_position) / (m + M)

As the dog walks 7.8 m towards the shore, the boat moves in the opposite direction to keep the center of mass of the system in the same place. Let's denote the distance that the boat moves as x. Using the conservation of momentum:

m × dog_walk = M × x

The distance from the shore after the dog walks = initial dog's distance from shore - dog's walk + boat's movement towards shore (which is x).

However, since we're keeping the center of mass stationary, boat's movement towards shore (x) is equal to the dog's walk distance (7.8 m) multiplied by the ratio of the dog's mass to the boat's mass.

Therefore:

x = (m/M) × dog_walk

And so, the final distance from the shore = 22.5m - 7.8m + x

Answer:

The focal length of the eyepiece is 4.012 cm.

Explanation:

Given that,

Focal length = 1.5 cm

angular magnification = -58

Distance of image = 18 cm

We need to calculate the focal length of the eyepiece

Using formula of angular magnification

[tex]m=-(\dfrac{i-f_{e}}{f_{0}})\dfrac{N}{f_{e}}[/tex]

Where,

[tex]i[/tex] = distance between the lenses in a compound  microscope

[tex]f_{e}[/tex]=focal length of eyepiece

[tex]f_{0}[/tex]=focal length of the object

N = normal point

Put the value into the formula

[tex]-58=-(\dfrac{18-f_{e}\times25}{1.5\timesf_{e}})[/tex]

[tex]87f_{e}=450-25f_{e}[/tex]

[tex]f_{e}=\dfrac{450}{112}[/tex]

[tex]f_{e}=4.012\ cm[/tex]

Hence,  The focal length of the eyepiece is 4.012 cm.

(a) The frequency from the stationary whistle as heard by the listener is approximately [tex]\(409.62 \, \text{Hz}\)[/tex].

(b) The frequency from the moving whistle as heard by the listener is approximately [tex]\(454.55 \, \text{Hz}\).[/tex]

(c) The beat frequency detected by the listener is approximately [tex]\(44.93 \, \text{Hz}\).[/tex]

To solve this problem, we can use the Doppler effect formula for sound frequencies.

The formula for the apparent frequency [tex](\(f'\))[/tex] heard by an observer when the source and/or observer is in motion relative to the medium is given by:

[tex]\[ f' = \frac{f \cdot (v + v_o)}{(v + v_s)} \][/tex]

where:

- [tex]\( f \)[/tex] is the frequency emitted by the source,

- [tex]\( v \)[/tex] is the speed of sound in the medium (assumed to be constant),

- [tex]\( v_o \)[/tex] is the speed of the observer relative to the medium,

- [tex]\( v_s \)[/tex] is the speed of the source relative to the medium.

Given:

- [tex]\( f = 392 \, \text{Hz} \)[/tex] (frequency emitted by both whistles),

-[tex]\( v = 343 \, \text{m/s} \)[/tex] (speed of sound in air),

- [tex]\( v_o = 15.0 \, \text{m/s} \)[/tex] (speed of the listener),

- [tex]\( v_s = 35.0 \, \text{m/s} \)[/tex] (speed of the moving whistle).

Let's calculate each part of the problem:

(a) Frequency from the stationary whistle [tex](\(f_1'\))[/tex] as heard by the listener:

[tex]\[ f_1' = \frac{f \cdot (v + v_o)}{(v + v_s)} \]\[ f_1' = \frac{392 \, \text{Hz} \cdot (343 \, \text{m/s} + 15.0 \, \text{m/s})}{(343 \, \text{m/s} + 0 \, \text{m/s})} \]\[ f_1' = \frac{392 \, \text{Hz} \cdot (358.0 \, \text{m/s})}{343 \, \text{m/s}} \]\[ f_1' \approx 409.62 \, \text{Hz} \][/tex]

(b) Frequency from the moving whistle [tex](\(f_2'\))[/tex] as heard by the listener:

[tex]\[ f_2' = \frac{f \cdot (v + v_o)}{(v - v_s)} \]\[ f_2' = \frac{392 \, \text{Hz} \cdot (343 \, \text{m/s} + 15.0 \, \text{m/s})}{(343 \, \text{m/s} - 35.0 \, \text{m/s})} \]\[ f_2' = \frac{392 \, \text{Hz} \cdot (358.0 \, \text{m/s})}{308 \, \text{m/s}} \]\[ f_2' \approx 454.55 \, \text{Hz} \][/tex]

(c) Beat frequency detected by the listener:

The beat frequency is the difference in frequencies between the two whistles as heard by the listener:

[tex]\[ \text{Beat frequency} = |f_1' - f_2'| \]\[ \text{Beat frequency} = |409.62 \, \text{Hz} - 454.55 \, \text{Hz}| \]\[ \text{Beat frequency} \approx 44.93 \, \text{Hz} \][/tex]

So, the answers are:

(a) The frequency from the stationary whistle as heard by the listener is approximately [tex]\(409.62 \, \text{Hz}\)[/tex].

(b) The frequency from the moving whistle as heard by the listener is approximately [tex]\(454.55 \, \text{Hz}\).[/tex]

(c) The beat frequency detected by the listener is approximately [tex]\(44.93 \, \text{Hz}\).[/tex]

Answer:

F = 0.7 N

Explanation:

As we know that the wire touch the ends of the diagonal of the rectangle

so here the length of the wire is given as

[tex]L = \sqrt{x^2 + y^2}[/tex]

[tex]L = \sqrt{0.6^2 + 0.8^2}[/tex]

[tex]L = 1 m[/tex]

now force due to magnetic field on current carrying wire is given as

[tex]F = iLB[/tex]

now we have

[tex]F = (7)(1)(0.1)[/tex]

[tex]F = 0.7 N[/tex]

Answer:

462 nm

Explanation:

Given: width of the slit, d = 5.6 × 10⁻⁴ m

Distance of the screen, D = 4.0 m

Fringe width, β = 3.3 mm = 3.3 × 10⁻³ m

First dark fringe means n =1

Wavelength of the light, λ = ?

[tex] \beta = \frac{\lambda D}{d}\\ \Rightarrow \lambda = \frac{d \beta}{D} =\frac{5.6\times 10^{-4} \times 3.3 \times 10^{-3}}{4.0} = 4.62 \times 10^{-7}m = 462 nm[/tex]

Answer:

The center of mass of the two-ball system is 7.05 m above ground.

Explanation:

Motion of 0.50 kg ball:

Initial speed, u = 0 m/s

Time = 2 s

Acceleration = 9.81 m/s²

Initial height = 25 m

Substituting in equation s = ut + 0.5 at²

                 s = 0 x 2 + 0.5 x 9.81 x 2² = 19.62 m

Height above ground = 25 - 19.62 = 5.38 m

Motion of 0.25 kg ball:

Initial speed, u = 15 m/s

Time = 2 s

Acceleration = -9.81 m/s²

Substituting in equation s = ut + 0.5 at²

                 s = 15 x 2 - 0.5 x 9.81 x 2² = 10.38 m

Height above ground = 10.38 m

We have equation for center of gravity

          [tex]\bar{x}=\frac{m_1x_1+m_2x_2}{m_1+m_2}[/tex]

          m₁ = 0.50 kg

          x₁ = 5.38 m        

          m₂ = 0.25 kg

          x₂ = 10.38 m    

Substituting

         [tex]\bar{x}=\frac{0.50\times 5.38+0.25\times 10.38}{0.50+0.25}=7.05m[/tex]

The center of mass of the two-ball system is 7.05 m above ground.  

The resulting velocity of the center of mass is (A)[tex]11 m/s[/tex]downward.

To find the velocity of the center of mass of the two-ball system, we need to calculate the velocities of each ball after [tex]2.0[/tex] seconds and then use the center of mass formula.

[tex]v_1 = 0 + (9.8 \, \text{m/s}^2 \cdot 2.0 \, \text{s}) \\= 19.6 \, \text{m/s}[/tex](downward).

[tex]v_2 = 15 \, \text{m/s} - (9.8 \, \text{m/s}^2 \cdot 2.0 \, \text{s}) \\= 15 \, \text{m/s} - 19.6 \, \text{m/s} \\= -4.6 \, \text{m/s}[/tex]

(negative since it's moving downward).

Total mass ([tex]M[/tex]): [tex]0.50 kg + 0.25 kg = 0.75 kg[/tex]

[tex]V_{\text{cm}} = \frac{0.50 \, \text{kg} \cdot 19.6 \, \text{m/s} + 0.25 \, \text{kg} \cdot (-4.6 \, \text{m/s})}{0.75 \, \text{kg}} \\= \frac{9.8 - 1.15}{0.75} \\= 11.0 \, \text{m/s}[/tex] (downward)

Complete question:-

At the same instant that a [tex]0.50kg[/tex] ball is dropped from [tex]25 m[/tex] above Earth, a second ball, with a mass of [tex]0.25 kg[/tex], is thrown straight upward from Earth's surface with an initial speed of [tex]15 m/s.\\[/tex]. They move along nearby lines and pass without colliding. At the end of [tex]2.0 s[/tex] the velocity of the center of mass of the two-ball system is:

A) [tex]11 m/s[/tex], down

B) [tex]11 m/s[/tex], up

C) [tex]15 m/s[/tex], down

D) [tex]15 m/s[/tex], up

E) [tex]20 m/s[/tex], down