A positive charge (q = +6.0 µC) starts from point A in a constant electric field and accelerates to point B. The work done by the electric force is WAB = +2.2 × 10-3 J. Determine the potential difference VB - VA between the two points. Be sure to include the proper algebraic sign.

Answer:

The ratio of the young's modulus of steel and copper is [tex]1.79\times10^{-2}[/tex]

(c) is correct option.

Explanation:

Given that,

Length of steel wire = 4.7 m

Cross section[tex]A = 3\times10^{-3}\ m^2[/tex]

Length of copper wire = 3.5 m

Cross section[tex]A = 4\times10^{-5}\ m^2[/tex]

We need to calculate the ratio of young's modulus of steel and copper

Using formula of young's modulus for steel wire

[tex]Y=\dfrac{\dfrac{F}{A}}{\dfrac{\Delta l}{l}}[/tex]

[tex]Y_{s}=\dfrac{Fl_{s}}{A_{s}\Delta l}[/tex]....(I)

The young's modulus for copper wire

[tex]Y_{c}=\dfrac{Fl_{c}}{A_{c}\Delta l}[/tex]....(II)

From equation (I) and (II)

The ratio of the young's modulus of steel and copper

[tex]\dfrac{Y_{s}}{Y_{c}}=\dfrac{\dfrac{Fl_{s}}{A_{s}\Delta l}}{\dfrac{Fl_{c}}{A_{c}\Delta l}}[/tex]

[tex]\dfrac{Y_{s}}{Y_{c}}=\dfrac{A_{c}\times l_{s}}{A_{s}\times l_{c}}[/tex]

[tex]\dfrac{Y_{s}}{Y_{c}}=\dfrac{4\times10^{-5}\times4.7}{3\times10^{-3}\times3.5}[/tex]

[tex]\dfrac{Y_{s}}{Y_{c}}=1.79\times10^{-2}[/tex]

Hence, The ratio of the young's modulus of steel and copper is [tex]1.79\times10^{-2}[/tex]

Answer:

(a) 85.64°F

(b) 78.28°C

(c)  - 268.8°C  

Explanation:

(a) 29.8°C into °F

To convert °C into °F, we use the formula given below

C / 100 = (F - 32) / 180

C / 5 = (F - 32) / 9

9 x 29.8 / 5 = F - 32

F = 85.64°F

(b) 172.9°F into °C

C / 5 = (F - 32) / 9

C = (172.9 - 32) x 5 / 9

C = 78.28°C

(c) 4.2 K into °C

C = K - 273

C = 4.2 - 273 = - 268.8°C

Answer:

4 m/s

Explanation:

M = mass of the hammer = 8.91 kg

m = mass of the metal piece = 0.411 kg

h = height gained by the metal piece = 3.88 m

Potential energy gained by the metal piece is given as

PE = mgh

PE = (0.411) (9.8) (3.88)

PE = 15.6 J

KE = Kinetic energy of the hammer

Given that :

Potential energy of metal piece = (0.219) Kinetic energy of the hammer

PE = (0.219) KE

15.6 = (0.219) KE

KE = 71.2 J

v = speed of hammer

Kinetic energy of hammer is given as

KE = (0.5) M v²

71.2 = (0.5) (8.91) v²

v = 4 m/s

Answer:

volumme =0.36 ml

Explanation:

total heat required can be obtained by using following formula

[tex]q= mC \Delta T[/tex].......(1)

where,

m - mass of water,

C - specific heat capacity of water and = 4.184 j g^{-1} °C

[tex]\Delta T[/tex] - total change in temperature.  = 10°C

The density of water is 1 g/cc. hence, 200 mL of water is equal to 200 g

putting all value in the above equation (1)

q = 200*4.184* 10 ° = 8368 J.

Therefore total number of moles of ethanol required to supply 8368 J of heat is

[tex]\frac {8368}{1368000} = 0.006117 moles.[/tex]

The molar mass of ethanol is 46 g/mol.

The mass of ethanol required is 46* 0.006117 = 0.28138 g

The density of ethanol is 0.78 g/ml.

The volume of ethanol required is

[tex]\frac {0.28138}{0.78} = 0.36 ml[/tex]

To heat 200 mL of water by 10 °C, you would need approximately 0.00785 mL of ethanol. This is calculated by converting the volume of water to its mass, calculating the heat energy using the specific heat capacity of water, and then converting that energy to the amount of ethanol required using the heat of combustion of ethanol.

To calculate the amount of ethanol required to heat 200 mL of water by 10 °C, we need to use the formula: Q = mcΔT, where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

First, we need to convert the volume of water to its mass. Since the density of water is 1 g/mL, the mass of 200 mL of water is 200 g.

Next, we can calculate the heat energy using the formula: Q = mcΔT. The specific heat capacity of water is 4.184 J/g °C, the mass of water is 200 g, and the change in temperature is 10 °C. Plugging in these values, we get: Q = (200 g)(4.184 J/g °C)(10 °C) = 8376 J.

Finally, we can convert this heat energy to the amount of ethanol required using the heat of combustion of ethanol. The heat of combustion of ethanol is -1368 kJ/mol. To convert from J to kJ, we divide the heat energy by 1000 to get: 8376 J / 1000 = 8.376 kJ.

Now we can calculate the volume of ethanol. Since the density of ethanol is 0.78 g/mL, we can use the formula: V = m/ρ, where V is the volume, m is the mass, and ρ is the density. The mass of ethanol can be calculated by rearranging the formula: m = Q/ΔH, where Q is the heat energy and ΔH is the heat of combustion. Plugging in the values, we get: m = 8.376 kJ / -1368 kJ/mol = -0.00611 mol.

Now we can calculate the volume of ethanol using the formula: V = m/ρ. The mass of ethanol is -0.00611 mol and the density of ethanol is 0.78 g/mL. Plugging in these values, we get: V = -0.00611 mol / (0.78 g/mL) = -0.00785 mL.

Since volume cannot be negative, the volume of ethanol required to heat 200 mL of water by 10 °C is 0.00785 mL.

https://brainly.com/question/33170579

#SPJ11

Answer:

Option C is the correct answer.

Explanation:

We equation for elongation

      [tex]\Delta L=\frac{PL}{AE}[/tex]

Here we need to find load required,

We need to double the wire, that is ΔL = 2L - L = L

A = 5 x 10⁻⁵ m²

E = 2 x 10¹¹ N/m²

Substituting

     [tex]L=\frac{PL}{5\times 10^{-5}\times 2\times 10^{11}}\\\\P=10^7N[/tex]

Option C is the correct answer.

Answer:

The total work done will be zero.

Explanation:

Given that,

Mass = 100 kg

Force = 392 N

Velocity = 20 m/s

Distance s= 10 m

We need to calculate the work done

Using balance equation

The net force will be

[tex]F'=F-\mu mg[/tex]

[tex]F'=392-0.4\times100\times9.8[/tex]

[tex]F'=0[/tex]

The net force is zero.

Hence, The total work done will be zero by all forces on the object.

By using steam tables or similar thermodynamic property charts, you can determine the initial and final temperature and enthalpy of R-134a under specified pressure conditions in a rigid container. As the pressure changes with heating, you can find the corresponding changes in temperature and enthalpy.

The subject matter of this question falls under the domain of thermodynamics in physics. It involves an element of heating, changes in pressure and the resultant alterations in temperature. Given the specifics, we can't directly provide a numerical solution in this setting as it requires the usage of refprop or other similar thermodynamic property database or the proper specific enthalpy and temperature charts for R-134a. However, conceptually, it can be handled via using steam tables (or more specifically refrigerant tables) for the substance R-134a. Initially, you lookup the properties using the given pressure and known mass and volume to calculate the initial temperature and enthalpy. Similarly, when the container is heated and the pressure raises to 600 kPa, you can again refer to the steam tables with this new pressure (and the volume which remains unchanged as the container is rigid) to determine the new temperature and enthalpy.

https://brainly.com/question/34045237

#SPJ6

The close were the centers of the objects at closest approach 2.7 x 10^-14 m

E =8.8 MeV = 8.8 x 1.6 x 10^-13 J

q = 2 e = 2 x 1.6 x 10^-19 C

Q = 82 e = 82 x 1.6 x 10^-19 C

Let d be the distance of closest approach

E = k Q q / d

Where, K = 9 x 10^9 Nm^2 / C^2

d = k Q q / E

d = (9 x 10^9 x 82 x 1.6 x 10^-19 x 2 x 1.6 x 10^-19) / (8.8 x 1.6 x 0^-13)

d = 2.7 x 10^-14 m

Answer:

A) 0.660 g/ml

B) 1.297 ml

C) 0.272 g

Explanation:

Every substance, body or material has mass and volume, however the mass of different substances occupy different volumes.  This is where density [tex]D[/tex] appears as a  physical characteristic property of matter that establishes a relationship between the mass [tex]m[/tex] of a body or substance and the volume [tex]V[/tex] it occupies:

[tex]D=\frac{m}{V}[/tex] (1)

Knowing this, let's begin with the answers:

Here the mass is [tex]m=0.155g[/tex] and th volume [tex]V=0.000235L=0.235mL[/tex]

Solving (1) with these values:

[tex]D=\frac{0.155g}{0.235mL}[/tex] (2)

[tex]D=0.660g/mL[/tex] (3)

In this case the mass of a sample is [tex]m=4.71g[/tex] and its density is [tex]D=3.63g/mL[/tex].

Isolating [tex]V[/tex] from (1):

[tex]V=\frac{m}{D}[/tex] (4)

[tex]V=\frac{4.71g}{3.63g/mL}[/tex] (5)

[tex]V=1.297mL[/tex] (5)

In this case the volume of a sample is [tex]V=0.293mL[/tex] and its density is [tex]D=0.930g/mL[/tex].

Isolating [tex]m[/tex] from (1):

[tex]m=D.V[/tex] (6)

[tex]m=(0.930g/mL)(0.293mL)[/tex] (7)

[tex]m=0.272g[/tex] (8)

To compute density, volume or mass, utilize the density formula (Density = Mass / Volume). For problem A, the liquid's density is 0.660 g/mL. For B, the volume of the sample is 1.30 mL, and for C, the mass of the sample is 0.272 g.

The formula to calculate density is Density = Mass / Volume. A. To calculate the density in g/mL of a liquid with a mass of 0.155 g and a volume of 0.000235 L, we first need to convert the volume from liters to milliliters: 0.000235 L is equal to 0.235 mL. Then, divide the mass by the volume to get the density: Density = 0.155 g / 0.235 mL = 0.660 g/mL.

B. To calculate the volume in milliliters of a 4.71-g sample of a solid with a density of 3.63 g/mL, divide the mass by the density: Volume = 4.71 g / 3.63 g/mL = 1.30 mL.

C. To calculate the mass of a 0.293-mL sample of a liquid with a density of 0.930 g/mL, multiply the volume by the density: Mass = 0.293 mL * 0.930 g/mL = 0.272 g.

https://brainly.com/question/32802084

#SPJ6

Answer:

energy dissipated = 132 kJ

Explanation:

mass = 61 kg

height drop = 227 m

velocity = 11 m/s

potential energy due to height drop from top to bottom

                         P.E. =  m g h

                         P.E. =  61× 9.8× 227

                         P.E. = 135,700 J

kinetic energy = [tex]\frac{1}{2}mv^2[/tex]

                        = [tex]\frac{1}{2}\times 61 \times 11^2[/tex]

                        = 3690.5 J

energy dissipated = P.E - K.E.

                              = 135,700 J -3690.5 J

                              =132,009.5 J = 132 kJ

Answer:

option (a)

Explanation:

Wavelength is defined as the distance traveled by the wave in one complete oscillation.

The number of oscillations completed in one second is called frequency.

The relation for the wave velocity is given by

wave velocity = frequency x wavelength

Answer:

72 m/s

Explanation:

D1 = 3 cm, v1 = 2 m/s

D2 = 0.5 cm,

Let the velocity at narrow end be v2.

By use of equation of continuity

A1 v1 = A2 v2

3.14 × 3 × 3 × 2 = 3.14 × 0.5 ×0.5 × v2

v2 = 72 m/s

Answer:

The inductance of the inductor is 35.8 mH

Explanation:

Given that,

Voltage = 120-V

Frequency = 1000 Hz

Capacitor [tex]C= 2.00\mu F[/tex]

Current = 0.680 A

We need to calculate the inductance of the inductor

Using formula of current

[tex]I = \dfrac{V}{Z}[/tex]

[tex]Z=\sqrt{R^2+(L\omega-\dfrac{1}{C\omega})^2}[/tex]

Put the value of Z into the formula

[tex]I=\dfrac{V}{\sqrt{R^2+(L\omega-\dfrac{1}{C\omega})^2}}[/tex]

Put the value into the formula

[tex]0.680=\dfrac{120}{\sqrt{(100)^2+(L\times2\pi\times1000-\dfrac{1}{2\times10^{-6}\times2\pi\times1000})^2}}[/tex]

[tex]L=35.8\ mH[/tex]

Hence, The inductance of the inductor is 35.8 mH

Answer:

Inductance,L:

"The property of the conductor or the solenoid to generate the electromotive force,emf due to the flow of current,I."

Unit:  henry,H as it is equivalent to, kg.m².sec⁻².A⁻².

Explanation:

Data:

Solution:

We need to calculate the inductance, L of the solenoid inside a circuit,

Answer:

The wavelength of electron is [tex]6.99\times 10^{-22}\ m[/tex]

Explanation:

The kinetic energy of the electron is, [tex]E=0.5\ MeV=0.5\times 10^6\ eV[/tex]

We need to find the wavelength of this electron. It can be calculated using the concept of DE-broglie wavelength as :

[tex]\lambda=\dfrac{h}{\sqrt{2mE} }[/tex]

h is Plank's constant

m is the mass of electron

[tex]\lambda=\dfrac{6.67\times 10^{-34}\ J-s}{\sqrt{2\times 9.1\times 10^{-31}\ kg\times 0.5\times 10^6\ eV} }[/tex]        

[tex]\lambda=6.99\times 10^{-22}\ m[/tex]

So, the wavelength of electron is [tex]6.99\times 10^{-22}\ m[/tex]. Hence, this is the required solution.

The wavelength of an electron with a kinetic energy of 0.50 MeV (relativistic) is approximately 7.28 x 10^-12 m.

The wavelength of an electron with a kinetic energy of 0.50 MeV can be calculated using the relativistic de Broglie equation:

λ = h/(m*c)

Where λ is the wavelength, h is Planck's constant (6.63 x 10^-34 Js), m is the mass of the electron (9.11 x 10^-31 kg), and c is the speed of light (3.00 x 10^8 m/s).

Substituting the values:

λ = (6.63 x 10^-34 Js)/((9.11 x 10^-31 kg)*(3.00 x 10^8 m/s))

λ ≈ 7.28 x 10^-12 m

Therefore, the wavelength of the electron is approximately 7.28 x 10^-12 m.

Answer:

0.9

Explanation:

h = 400 mm, h' = 325 mm

Let the coefficient of restitution be e.

h' = e^2 x h

325 = e^2 x 400

e^2 = 0.8125

e = 0.9

The coefficient of restitution between the ball and the surface is 0.9.

The coefficient of restitution (e) between the ball and the surface can be determined using the formula:

[tex]\[ e = \sqrt{\frac{\text{height after collision}}{\text{height before collision}}} \][/tex]

First, we need to convert the heights from millimeters to meters for consistency, since the standard units for height in physics are meters.

The initial height (h_i) before the collision is 400 mm, which is equivalent to 0.4 m (since 1 m = 1000 mm).

The final height (h_f) after the collision is 325 mm, which is equivalent to 0.325 m.

Now, we can plug these values into the formula for the coefficient of restitution:

[tex]\[ e = \sqrt{\frac{0.325 \text{ m}}{0.4 \text{ m}}} \][/tex]

[tex]\[ e = \sqrt{\frac{325}{400}} \][/tex]

[tex]\[ e = \sqrt{0.8125} \][/tex]

[tex]\[ e = 0.9 \][/tex]

Therefore, the coefficient of restitution between the ball and the surface is 0.9. This means that the collision is relatively elastic, with the ball retaining a significant portion of its initial kinetic energy after the rebound.

Answer:

[tex]A = 0.2875 m^2[/tex]

Explanation:

As we know that

[tex]Q = 4.6 \mu C[/tex]

E = 1.8 kV/mm

now we know that electric field between the plated of capacitor is given as

[tex]E = \frac{\sigma}{\epsilon_0}[/tex]

now we will have

[tex]1.8 \times 10^6 = \frac{\sigma}{\epsilon_0}[/tex]

[tex]\sigma = (1.8 \times 10^6)(8.85 \times 10^{-12})[/tex]

[tex]\sigma = 1.6 \times 10^{-5} C/m^2[/tex]

now we have

[tex]\sigma = \frac{Q}{A}[/tex]

now we have area of the plates of capacitor

[tex]A = \frac{Q}{\sigma}[/tex]

[tex]A = \frac{4.6 \times 10^{-6}}{1.6 \times 10^{-5}}[/tex]

[tex]A = 0.2875 m^2[/tex]

Answer:

Frequency, [tex]f=1.2\times 10^{10}\ Hz[/tex]

Explanation:

It is given that,

Magnetic field, B = 0.43 T

We need to find the frequency the electron traverse a circular path. It is also known as cyclotron frequency. It is given by :

[tex]f=\dfrac{qB}{2\pi m}[/tex]

[tex]f=\dfrac{1.6\times 10^{-19}\ C\times 0.43\ T}{2\pi \times 9.11\times 10^{-31}\ Kg}[/tex]

[tex]f=1.2\times 10^{10}\ Hz[/tex]

Hence, this is the required solution.

Answer:

Not Changed

Explanation:

To know what happened with the volume you need to know the Ideal gas Law

[tex]\frac{P_{1}V_{1}}{T1} =\frac{P_{2}V_{2} }{T2}[/tex]

This law is a combination of the other four laws: Boyles's, Charles's, Avogadro's, and Guy-Lussac's.

The initial state is represented by P1, V1, T1 and the final by P2, V2, T2.

In this case:

[tex]T_{2} =3T_{1} \\P_{2} =3P_{1}[/tex]

Replacing on the equation

[tex]\frac{P_{1}V_{1}}{T1} =\frac{3P_{1}V_{2}}{3T_{1} }[/tex]

If we clear from the equation V2

[tex]\frac{P_{1}V_{1}3T_{1}}{T_{1} 3P_{1}} ={V_{2}}[/tex]

Then cancel both P1 and T1

[tex]\frac{3V_{1}}{3} =V_{2}[/tex]

You will found that

[tex]V_{1} =V_{2}[/tex]

Answer:

speed, distance  and direction of motion of the object can be determined by analyzing the radio wave.

Explanation:

We know that radar operates by transmitting radio waves to a destination and these waves are comes back to the receiver station. By Considering this transmission and receiver process, we can measure the distance, velocity and path of an object's movement.

Distance can be assessed by taking following consideration,  the velocity of the waves is V. It can help to assess the time made for the waves to be emitted by the radar and felt by the receiver, let the time be t.

Therefore  distance can be determine as D= v*t/2,

here 2 signifies that the distance travelled by the wave in either direction ( from transmitter to receiver and vice verse)

Using the source wave frequency, speed can be computed. In a specific frequency, the radar starts sending out the frequencies and the reflected wave will have a distinct frequency. The velocity can be determine by

[tex]v= (\Delta f/f)(c/2),[/tex]

where[tex]\Delta f[/tex]is the change in frequency and

c is the speed of light (the wave).

Direction can be determine by applying above principle. change in frequency is used to determine the direction in the following way:

When the frequency transition is very low, the object moves away from the radar and vice verse.

Answer:

(kg⋅m/s)

Explanation:

The unit of momentum is the product of the units of mass and velocity. In SI units, if the mass is in kilograms and the velocity is in meters per second then the momentum is in kilogram meters per second (kg⋅m/s)

This question is dealing with fundamental SI units. Thus, let's list the seven basic SI Units upon which other units are expressed;

Mass - kilogram (kg)

Length - meter (m)

Time - second (s)

Amount of substance - mole (mol)

Electric current - ampere (A)

Thermodynamic temperature - kelvin (K)

Luminous intensity - candela (cd)

Fundamental SI unit of momentum is Kg.m/s

Now, we want to write the SI Unit of momentum.

From the question, we are told that Physicists often measure the momentum of subatomic particles using the formula;

MeV/c, where c is the speed of light, and 1 MeV = 1.6 ✕ 10−13 kg.m²/s²

Now, we know that unit of speed is in m/s.

Thus, in units, momentum = MeV/c = (kg.m²/s²)/(m/s)

Simplifying this gives; Kg.m/s

Read more at; brainly.com/question/66429

Answer:

23.98 rpm

Explanation:

d = diameter of merry-go-round = 2.4 m

r = radius of merry-go-round = (0.5) d = (0.5) (2.4) = 1.2 m

m = mass of merry-go-round = 270 kg

I = moment of inertia of merry-go-round

Moment of inertia of merry-go-round is given as  

I = (0.5) m r² = (0.5) (270) (1.2)² = 194.4 kgm²

M = mass of john = 34 kg

Moment of inertia of merry-go-round and john together after jump is given as

  I' = (0.5) m r² + M r² = 194.4 + (34) (1.2)² = 243.36 kgm²

w = final angular speed

w₀ = initial angular speed of merry-go-round = 20 rpm = 2.093 rad/s

v = speed of john before jump

using conservation of angular momentum

Mvr + I w₀ = I' w

(34) (5) (1.2) + (194.4) (2.093) = (243.36) w

w = 2.51 rad/s

w = 23.98 rpm

Answer:

(A) 667.5 N/m

(B)

Explanation:

(A) Let the spring constant be k.

Using the formula F = kx

k = 251 / 0.376

K = 667.5 N/m

(B)

Work done

W = 0.5 × kx^2

W = 0.5 × 667.5 × 0.376 × 0.376

W = 47.2 J

Answer:

99 dB

Explanation:

We have given that sound intensity with a damaged muffler =8× [tex]10^{-3}[/tex]

we have to find the intensity level of the this sound in decibels

for calculating in decibels we have to use the formula

β=[tex]10log\frac{I}{I_0}[/tex]

  =[tex]10log\frac{.008}{10^{-12}}[/tex]

   =10 log8+10 log[tex]10^{9}[/tex]

   =10 log8+90 log10

   =10×0.9030+90

   =99 dB

Final answer:

To calculate the intensity level of a sound in decibels, use the formula β = 10 log10(I/I0). Given the intensity of [tex]8.0 \times 10^{-3[/tex] threshold of hearing of [tex]10^{-12[/tex] the sound intensity level is approximately 99 decibels.

Explanation:

The student asks about calculating the intensity level of sound in decibels, given the sound intensity at the ear of a passenger in a car with a damaged muffler (8.0 × 10-3 W/m2). To find the intensity level in decibels (dB), we use the formula:

β = 10 log10(I/I0)

where:

Plugging in the values:

β = 10 log10(8.0 × 10-3 / 10-12)

β = 10 log10(8.0 × 109)

β = 10 (log10(8) + log10(109))

β = 10 (0.903 + 9)

β = 10 × 9.903

β = 99.03 dB

The intensity level of the sound in the car with the damaged muffler is approximately 99 decibels.

Explanation:

Charge on proton, q₁ = e

Charge on alpha particles, q₂ = 2e

The magnetic force is given by :

[tex]F=qvB\ sin\theta[/tex]

Here, [tex]\theta=90=sin(90) = 1[/tex]

For proton, [tex]F_p=ev_pB[/tex]..........(1)

For alpha particle, [tex]F_a=2ev_aB[/tex]..........(2)

Since, a proton (charge e), traveling perpendicular to a magnetic field, experiences the same force as an alpha particle. So,

[tex]ev_pB=2ev_aB[/tex]

[tex]\dfrac{v_p}{v_a}=\dfrac{2}{1}[/tex]

So, the ratio of the speed of proton to the alpha particle is 2 : 1 .Hence, this is the required solution.

If a proton and an alpha particle experience the same force in a magnetic field, the proton must be traveling at twice the speed of the alpha particle. This is because the force exerted by a magnetic field on a moving charge depends on the charge of the particle, the speed of the particle, and the strength of the magnetic field.

The force exerted by a magnetic field on a moving charge depends on the charge of the particle, the speed of the particle, and the strength of the magnetic field. Given that a proton (charge e) and alpha particle (charge 2e) experience the same force in the same magnetic field, we can create an equation to solve for their speed ratio.

The force on a particle due to a magnetic field is given by F = qvB where q is the charge, v is the speed, and B is the magnetic field. Since the force on the proton and alpha particle are the same, we can set their force equations equal to each other.

This means that e * v_proton * B = 2e * v_alpha * B. Simplifying, the ratio v_proton/v_alpha = 2.

Therefore, the proton is moving twice as fast as the alpha particle.

https://brainly.com/question/3160109

#SPJ3

Answer:

If R₂=25.78 ohm, then R₁=10.58 ohm

If R₂=10.57 then R₁=25.79 ohm

Explanation:

R₁ = Resistance of first resistor

R₂ = Resistance of second resistor

V = Voltage of battery = 12 V

I = Current = 0.33 A (series)

I = Current = 1.6 A (parallel)

In series

[tex]\text{Equivalent resistance}=R_{eq}=R_1+R_2\\\text {From Ohm's law}\\V=IR_{eq}\\\Rightarrow R_{eq}=\frac{12}{0.33}\\\Rightarrow R_1+R_2=36.36\\ Also\ R_1=36.36-R_2[/tex]

In parallel

[tex]\text{Equivalent resistance}=\frac{1}{R_{eq}}=\frac{1}{R_1}+\frac{1}{R_2}\\\Rightarrow {R_{eq}=\frac{R_1R_2}{R_1+R_2}[/tex]

[tex]\text {From Ohm's law}\\V=IR_{eq}\\\Rightarrow R_{eq}=\frac{12}{1.6}\\\Rightarrow \frac{R_1R_2}{R_1+R_2}=7.5\\\Rightarrow \frac{R_1R_2}{36.36}=7.5\\\Rightarrow R_1R_2=272.72\\\Rightarrow(36.36-R_2)R_2=272.72\\\Rightarrow R_2^2-36.36R_2+272.72=0[/tex]

Solving the above quadratic equation

[tex]\Rightarrow R_2=\frac{36.36\pm \sqrt{36.36^2-4\times 272.72}}{2}[/tex]

[tex]\Rightarrow R_2=25.78\ or\ 10.57\\ If\ R_2=25.78\ then\ R_1=36.36-25.78=10.58\ \Omega\\ If\ R_2=10.57\ then\ R_1=36.36-10.57=25.79\Omega[/tex]

∴ If R₂=25.78 ohm, then R₁=10.58 ohm

If R₂=10.57 then R₁=25.79 ohm

The two resistors in question, when wired in a series, have a combined resistance of about 36.36 Ohms. When wired in parallel, they share a resistance of roughly 7.5 Ohms. The two resistor values would then most likely be around 28.86 Ohms and 7.5 Ohms.

The nature of your question indicates a focus on the properties and calculations associated with electrical resistors in a circuit. These resistors can either be configured in a series or parallel connection, which will drastically change their behavior and derived readings.

From the context of your question, it is evident that a 12V battery is being used in conjunction with two resistors. In a series connection, the sum of the voltages across each resistor will equal the total voltage, effectively segmenting the 12V battery's output. In a parallel connection, each resistor would experience the full 12V impact, leading to larger current readings. Your values indicate a 0.33A current in a series scenario and a 1.60A current in a parallel situation.

Knowing this, we can apply Ohm's Law, which states Voltage (V) equals Current (I) times Resistance (R). In the series connection, the total resistance can be calculated as 12V divided by 0.33A equals approximately 36.36 Ohms. For the parallel connection, the total resistance would be 12V divided by 1.60A equals approximately 7.5 Ohms. Subtracting these two values, we can find that one of the resistors is around 28.86 Ohms while the other is roughly 7.5 Ohms. This would satisfy both the series and parallel conditions outlined in your question.

https://brainly.com/question/18829138

#SPJ3

Explanation:

1. Force applied on an object is given by :

F = W = mg

(a) A 160 lb human being, F = 160 lb

g = acceleration due to gravity, g = 32 ft/s²

[tex]m=\dfrac{F}{g}[/tex]

[tex]m=\dfrac{160\ lb}{32\ ft/s^2}[/tex]

m = 5 kg

(b) A 1.9 lb cockatoo, F = 1.9 lb

[tex]m=\dfrac{F}{g}[/tex]

[tex]m=\dfrac{1.9\ lb}{32\ ft/s^2}[/tex]

m = 0.059 kg

2. (a) A 2300 kg rhinoceros, m = 2300 kg

[tex]W=2300\ kg\times 32\ ft/s^2=73600\ lb[/tex]

(b) A 22 g song sparrow, m = 22 g = 0.022 kg

[tex]W=0.022\ kg\times 32\ ft/s^2=0.704\ lb[/tex]

Hence, this is the required solution.

Final answer:

The mass of a 160 lb human being is 72.576 kg, and the mass of a 1.9 lb cockatoo is 0.86184 kg. A 2300 kg rhinoceros weighs 5060 lbs in English units, while a 22 g song sparrow weighs 0.0484 lbs.

Explanation:

To calculate the mass (in SI units) of a 160 lb human being, we use the conversion factor 1 lb = 0.4536 kg. So, the calculation is:160 lb x 0.4536 kg/lb = 72.576 kg

(a) The mass of a 160 lb human being in SI units is 72.576 kg.

For a 1.9 lb cockatoo, the conversion to kilograms is:1.9 lb x 0.4536 kg/lb
 = 0.86184 kg

(b) The mass of a 1.9 lb cockatoo in SI units is 0.86184 kg

To convert the mass of a 2300 kg rhinoceros to weight in English units, knowing that 1 kg = 2.2 lbs (where weight in pounds is considered the gravitational force on the mass), the weight is calculated as:

2300 kg x 2.2 lbs/kg= 5060 lbs

(c) The weight of a 2300 kg rhinoceros in English units is 5060 lbs.

Finally, for converting a 22 g song sparrow to weight in English units:

22 g x (1 kg/1000 g) x (2.2 lbs/kg)= 0.0484 lbs

(d) The weight of a 22 g song sparrow in English units is 0.0484 lbs.

The center of mass of these objects is located at approximately 12.652 meters on the y-axis.

We can find the center of mass (center of gravity) of these objects by calculating the weighted average of their positions along the y-axis. Here's how:

Consider Each Object:

We have four objects with masses m1, m2, m3, and m4 at positions y1, y2, y3, and y4 respectively.

Center of Mass Formula:

The center of mass coordinate (y_cm) is calculated as:

y_cm = (Σ(mi * yi)) / Σ(mi)

Σ (sigma) represents summation over all objects (i = 1 to 4 in this case).

mi is the mass of the i-th object.

yi is the y-axis position of the i-th object.

Apply the formula to our case:

y_cm = [(2.00 kg * 13.00 m) + (3.00 kg * 12.50 m) + (2.50 kg * 0.00 m) + (4.00 kg * 20.500 m)] / (2.00 kg + 3.00 kg + 2.50 kg + 4.00 kg)

Calculate:

y_cm = [26.00 kgm + 37.50 kgm + 0.00 kgm + 82.00 kgm] / 11.50 kg

y_cm ≈ 145.50 kg*m / 11.50 kg ≈ 12.652 m (rounded to four decimal places)

Therefore, the center of mass of these objects is located at approximately 12.652 meters on the y-axis.

Answer:

Speed, v = 6.91 m/s

Explanation:

Given that,

Spring constant, k = 594 N/m

It is attached to a table and is compressed down by 0.196 m, x = 0.196 m

We need to find the speed of the spring when it is released. Here, the elastic potential energy is balanced by the kinetic energy of the spring such that,

[tex]\dfrac{1}{2}kx^2=\dfrac{1}{2}mv^2[/tex]

[tex]v=\sqrt{\dfrac{kx^2}{m}}[/tex]

[tex]v=\sqrt{\dfrac{594\ N/m\times (0.196\ m)^2}{0.477\ kg}}[/tex]

v = 6.91 m/s

So, the speed of the ball is 6.91 m/s. Hence, this is the required solution.

Answer:

[tex]\dot{W} = 339.84 W[/tex]

Explanation:

given data:

flow Q = 9 m^{3}/s

velocity = 8 m/s

density of air = 1.18 kg/m^{3}

minimum power required to supplied to the fan is equal to the POWER POTENTIAL of the kinetic energy and it is given as

[tex]\dot{W} =\dot{m}\frac{V^{2}}{2}[/tex]

here [tex]\dot{m}[/tex]is mass flow rate and given as

[tex]\dot{m} = \rho*Q[/tex]

[tex]\dot{W} =\rho*Q\frac{V^{2}}{2}[/tex]

Putting all value to get minimum power

[tex]\dot{W} =1.18*9*\frac{8^{2}}{2}[/tex]

[tex]\dot{W} = 339.84 W[/tex]

The minimum power required to accelerate air to a velocity of 8 m/s at a rate of 9 m^3/s with a density of 1.18 kg/m^3 is roughly 339.84 Watts.

The subject of this question is physics, specifically the topic of power in mechanical systems. To find the minimum power required, we use the formula Power = 0.5 * density * volume flow rate * velocity^2. Plugging in the given values: Power = 0.5 * 1.18 kg/m^3 * 9 m^3/s * (8 m/s)^2, we get approximately 339.84 W. Therefore, the minimum power that must be supplied to the fan is roughly 339.84 Watts.

https://brainly.com/question/31734672

#SPJ3