The air pressure in the rigid tank Decreases.
Explanation:
A rigid tank is said to be a region where volume is always considered as a constant. During the process of cooling the rigid tank where the temperature is said to be decreased, the effect of air pressure in the tank also decreases.
Because, PV = RT, where P is the pressure, T is temperature, R is constant, V is the volume. Hence pressure is directly proportional to temperature.
Which body part would most likely be affected by the improper application of a compression wrap?
Answer:
Tendons
Explanation: A compression wrap is a strip of cloth that one can wrap around a strain or sprain. Its pressure helps in reducing swelling and the injury starts to heal itself.
A tendon connects muscle to bone for the proper functioning of the body. It is basically a band of fibrous connective tissue capable of withstanding tension.
In a uranium fission reaction, uranium splits into two smaller atoms and energy. Where did the energy come from?
A. Chemical bonds are broken, and chemical energy is released.
B. When the uranium splits, mass and energy are created making the two new atoms.
C. Some of uranium's mass is converted into energy, so the smaller atoms have less mass.
D. The energy had to be the kinetic energy of the atom of uranium before it split.
I know its not B or A because I got them wrong...;-;! I'm thinking its D now...
Answer: C. Some of uranium's mass is converted into energy, so the smaller atoms have less mass.
Explanation:
From Einstein's mass-energy relation:
E = mc²
Mass and energy are equivalent. Mass can be converted into energy and energy into mass.
When Uranium atoms under go nuclear fission, smaller atoms are formed and huge amount of energy is released. This energy comes from the mass difference of the uranium nuclei and new nuclei formed. This mass converted into energy according to Einstein's equation.
The correct option is C. Some of uranium's mass is converted into energy, so the smaller atoms have less mass.
In a uranium fission reaction, some of the uranium's mass is converted into energy. This transformation follows Einstein's famous equation, E=mc², indicating that mass can be converted into energy. Therefore, the correct answer is C. Some of uranium's mass is converted into energy, so the smaller atoms have less mass.
Nuclear fission involves splitting the nucleus of an atom, which releases a substantial amount of energy in the form of heat and radiation. This occurs because the nuclear binding energy that holds the nucleus together is released when the nucleus splits apart.
The process also releases additional neutrons, which can go on to initiate fission in other uranium atoms, resulting in a chain reaction. This released energy is then harnessed in nuclear power plants to produce electricity.
Cells are the basic units of life in living organisms. Which of the following components make up cells? A. tissues and organs B. atoms and molecules C. molecules and organs D. atoms and tissues
The statement that describes the components that make up cells are atoms and molecules. Details about cells can be found below.
What is a cell?A cell is a basic unit of a living organism, consisting of a quantity of protoplasm surrounded by a cell membrane.
A cell is the simplest unit of life, however, contains other subunits that make it up.
These components are atoms and molecules of elements that are responsible for the chemical makeup of a cell.
Learn more about cells at: https://brainly.com/question/3142913
#SPJ2
The frequency of a wave is 560 Hz. What is it’s period
If The frequency of a wave is 560 Hz. Then the period of the wave is 0.00179 seconds.
The period (T) of a wave is the time it takes for one complete cycle of the wave to occur. The frequency (f) of a wave is the number of complete cycles that occur in one second. These two quantities are related by the equation:
f = 1/T
To find the period of a wave when its frequency is given, we can rearrange this equation to solve for T:
T = 1/f
In this case, the frequency of the wave is given as 560 Hz. Therefore, the period of the wave can be calculated as:
T = 1/f = 1/560 Hz
T = 0.00179 seconds (rounded to five significant figures)
Therefore, the period of the wave is 0.00179 seconds.
To learn about the amplitude of a wave click:
https://brainly.com/question/29775285
#SPJ2
The period of a wave with a frequency of 560 Hz is calculated using the formula T = 1/f. Upon calculation, the period is approximately 0.0017857 seconds.
The frequency of a wave is directly related to its period, which is the time it takes to complete one cycle of the wave. With a frequency of 560 Hz, we understand this to mean that 560 cycles occur every second.
To find the period (T), we use the relationship T = 1/f, where f is the frequency. Therefore, the period of a wave with a frequency of 560 Hz can be calculated as:
T = 1/f
T = 1/560 Hz
T = 0.0017857 seconds (rounded to seven decimal places)
So the period of the wave is approximately 0.0017857 seconds.
How much heat energy (in megajoules) must be applied to melt 50 kg of lead at 20°C? (Hint: The melting point of lead is 327°C, and the specific heat of lead is 0.031.)
To melt 50 kg of lead at 20°C, we calculate the energy to raise the temperature to the melting point and the energy to melt the lead. The total heat energy required is 1,710.35 kJ.
To determine how much heat energy is required to melt 50 kg of lead at 20°C, we must consider two steps: heating the lead from 20°C to its melting point, and then melting the lead. The specific heat capacity of lead is given as 0.031 Wh/kg°C or 110 J/kg°C (using the conversion 1 Wh = 3,600 J). However, the latent heat of fusion for lead is not provided in the question, and we must consider the common value used for lead, which is approximately 24.7 kJ/kg.
First, calculate the energy to raise the temperature from 20°C to 327°C:
Energy required ([tex]E_{temp}[/tex]) = mass (m) x specific heat capacity (c) x change in temperature = 50,000 g x 0.031 J/g °C x (327°C - 20°C)
[tex]E_{temp}[/tex] = 50,000 g x 0.031 J/g °C x 307°C= 475,350 J = 475.35 kJ
Next, calculate the energy required to melt the lead:
Energy required to melt ([tex]{E_{melt}}[/tex]) = mass (m) x latent heat of fusion
= 50 kg x 24.7 kJ/kg
= 1,235 kJ
Finally, add the energy required to heat the lead to the melting point to the energy required to melt the lead to get the total heat transfer:
Total energy = [tex]E_{temp}[/tex] + [tex]{E_{melt}}[/tex]
= 475.35 kJ + 1,235 kJ
= 1,710.35 kJ
Therefore, to melt 50 kg of lead at 20°C, 1,710.35 kJ of heat energy must be applied.
Approximately 1496.35 kJ of heat energy is needed to melt 50 kg of lead at 20°C.
To find out how much heat energy is required to melt the lead, we need to calculate the heat required to raise the temperature of the lead from 20°C to its melting point (327°C), and then the heat required to melt it.
1. Heat to raise the temperature:
The formula for this is:
[tex]\[ Q = mc\Delta T \][/tex]
Where:
[tex]- \( Q \) = heat energy (in joules)[/tex]
[tex]- \( m \) = mass of the substance (in kg)[/tex]
[tex]- \( c \) = specific heat capacity (in J/kg°C)[/tex]
[tex]- \( \Delta T \) = change in temperature (in °C)[/tex]
Given:
[tex]- \( m = 50 \) kg (mass of lead)[/tex]
[tex]- \( c = 0.031 \) (specific heat capacity of lead)[/tex]
[tex]- \( \Delta T = (327 - 20) \) °C[/tex]
Substituting the values:
[tex]\[ Q = 50 \times 0.031 \times (327 - 20) \][/tex]
[tex]\[ Q = 50 \times 0.031 \times 307 \][/tex]
2. Heat to melt the lead:
The formula for this is:
[tex]\[ Q = mL \][/tex]
Where:
[tex]- \( Q \) = heat energy (in joules)[/tex]
[tex]- \( m \) = mass of the substance (in kg)[/tex]
[tex]- \( L \) = latent heat of fusion (in J/kg)[/tex]
The latent heat of fusion for lead is the energy required to change its phase from solid to liquid at its melting point. This value is typically given in tables and is [tex]\( 2.04 \times 10^4 \)[/tex] J/kg.
Given:
[tex]- \( m = 50 \) kg (mass of lead)[/tex]
[tex]- \( L = 2.04 \times 10^4 \) J/kg[/tex]
Substituting the values:
[tex]\[ Q = 50 \times 2.04 \times 10^4 \][/tex]
Now, let's calculate both:
[tex]1. \( Q_1 = 50 \times 0.031 \times 307 \)[/tex]
[tex]2. \( Q_2 = 50 \times 2.04 \times 10^4 \)[/tex]
Adding these together will give us the total heat energy required to melt 50 kg of lead at 20°C:
[tex]\[ \text{Total Heat Energy} = Q_1 + Q_2 \][/tex]
Let's calculate:
[tex]\[ Q_1 = 50 \times 0.031 \times 307 = 476.35 \text{ kJ} \][/tex]
[tex]\[ Q_2 = 50 \times 2.04 \times 10^4 = 1.02 \times 10^6 \text{ J} = 1020 \text{ kJ} \][/tex]
[tex]\[ \text{Total Heat Energy} = 476.35 \text{ kJ} + 1020 \text{ kJ} = 1496.35 \text{ kJ} \][/tex]
So, approximately 1496.35 kJ of heat energy must be applied to melt 50 kg of lead at 20°C.
A monatomic gas is measured to have an average speed of 1321 m/s. If the total amount of the gas is 5 mol (which equates to a mass of 0.02 kg), what is the approximate temperature of the gas? (Recall that the equation for kinetic energy due to translation in a gas is translational = mv2 = nRT, and R = 8.31 J/(mol K).) A. 350 K B. 300 K C. 280 K D. 320 K
Answer:
Explanation:
Given that,
Speed v = 1321 m/s
Total amount of gas
n = 5mol
Mass of gas
m = 0.02kg
Gas constant
R = 8.31 J/mol•K
Temperature T =?
For a monoatomic gas, the average kinetic energy can be determined using
½mv² = 3/2 × nRT
½ × 0.02 × 1321² = 3/2 × 5 × 8.31 × T
17450.41 = 62.325 T
Then, T = 17450.41 / 62.325
T = 279.991 K
Then,
T ≈ 280K
The correct option is C
Please help! 30Points!! An ultrasound machine uses waves to create images. The machine uses sound waves and which wave interaction?
A) diffraction
B) interference
C) reflection
D) refraction
Answer:
C) Reflection
Explanation:
In ultrasound technique we throw a sound of higher frequency towards the cells or the damaged part and then a detector is placed at the same point.
Now the detector is used to detect the reflected sound of the sound which we projected. Now the part from which detector not detect any sound will be termed as defect.
So in this whole process we need to find the part from which reflected sound is not detected.
So here correct answer must be
C) Reflection
why is the element carbon-14 important for paleontologist?
Answer:
carbon 14 is widely used in paleontology to know the age of objects.
Explanation:
Carbon is a fundamental part of all living beings, this element has two stable isotopes carbon 12 and carbon 13, the first being with an abundance of 98.9% and the other with an abundance of 1.1%, in addition to these there are some radioactive isotopes, that is, they decompose over time. One of the isotopes carbon 14 has a half-life of 5730 years.
The production of carbon 14 occurs naturally for cosmic radiation with nitrogen from the air, at a constant rate, which is why absorbed by living things with air and integrated into their system, when living beings die they stop absorbing this carbon 14 and the disintegration process begins. Therefore, by analyzing the amount of carbon 14 left in the sample, we can know when it died and infer how much time the sample had.
This procedure is called carbon dating 14, which is widely used in paleontology to know the age of objects.
Carbon-14 is important for paleontologists as it allows them to determine the age of organic remains found in archaeological deposits using carbon dating. By analyzing the ratio of Carbon-14 to its non-radioactive carbon by-product, paleontologists can estimate the time that has passed since the organism's death.
Explanation:Carbon-14 is important for paleontologists because it allows them to determine the age of organic remains found in archaeological deposits. Carbon-14 dating is a process that measures the amount of Carbon-14 remaining in a sample and compares it to its known half-life of 5,730 years. By analyzing the ratio of Carbon-14 to its non-radioactive carbon by-product, paleontologists can estimate how much time has passed since the organism's death and gain insights into the ecology and biogeography of organisms living within the past 50,000 years.
Suppose you need to remove a nail from a board by using a claw hammer. What is the input distance for a claw hammer if the output distance is 2.0 cm and the mechanical advantage is 5.5?
Answer:
[tex]d_i = 11.0\ cm[/tex]
Explanation:
It is given that,
Output distance of claw hammer is [tex]d_o=2.0 \ cm[/tex]
And mechanical advantage of claw hammer, m = 5.5
We need to find the input distance for a claw hammer.
The mechanical advantage of claw hammer is given by the ratio of input distance for a claw hammer to its output distance:
[tex]m=\dfrac{d_i}{d_o}[/tex] ....equation 1.
Now, putting values of [tex]d_o[/tex] and m in equation 1.
[tex]5.5=\dfrac{d_i}{2.0}[/tex]
[tex]d_i = 5.5\times 2.0 = 11.0\ cm[/tex]
Therefore value of input distance is 11.0 cm.Hence this is the required solution.
write down the total momentum for two marbles of mass,m, both moving at velocity, v. What is the kinetic energy of the system.
Why is the thickness greater for the bass strings of a guitar than for the treble strings?
molecules of which gas would exert the greatest collision force
gas S is the answer
I hope this helped you
have a good day :)
Answer: D
Explanation:
#18 please help. Thank You.
which statement accurately describes what happens when water turns to ice in terms of energy
Answer:
The water releases energy which causes the water molecules to have less kinetic and potential energy, changing their configuration from liquid to solid.
Explanation:
Confirmed through test.
The correct statement is given by Option C. The water releases energy which causes the water molecules to have less kinetic and potential energy changing their configuration from liquid to solid.
The process of water turning into ice involves a change in energy states. When liquid water freezes, it releases energy. This energy release causes the water molecules to lose kinetic and potential energy, allowing them to arrange into a more rigid configuration.
The complete question is:
Which statement accurately describes what happens when water turns to ice in terms of energy
A.The water absorbs which causes chemical bonds to form changing water into ice.
B. The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a solid.
C. The water releases energy which causes the water molecules to have less kinetic and potential energy changing their configuration from liquid to solid.
D. The water releases energy which causes Chemical bonds to form changing water into ice
A 5.0-m-diameter merry-go-round is initially turning with a 4.0 s period. It slows down and stops in 20 s. What is the angular acceleration as it stops.
The merry-go-round initially spins at π/2 rad/s. As it stops in 20 seconds, its angular acceleration (α) is approximately -0.08 rad/s², causing it to come to a halt.
Given:
Diameter of the merry-go-round, d = 5.0 meters
Initial period, T₀ = 4.0 seconds
Time to stop, t = 20 seconds
First, calculate the initial angular velocity (ω₀) using the formula:
ω₀ = 2π / T₀
ω₀ = 2π / 4.0 s = π/2 rad/s
Next, calculate the final angular velocity (ωf) when the merry-go-round stops. In this case, ωf is 0 rad/s because it comes to a stop.
Now, use the following angular motion equation to find the angular acceleration (α):
ωf = ω₀ + αt
0 rad/s = (π/2 rad/s) + α(20 s)
Solve for α:
α = -π/2 rad/s / 20 s = -π/40 rad/s² ≈ -0.08 rad/s²
So, the angular acceleration as the merry-go-round stops is approximately -0.08 rad/s².
For more such information on: angular acceleration
https://brainly.com/question/13014974
#SPJ6
What is the motion of the particles in this kind of wave?
A) The particles will move up and down over large areas.
B) The particles will move up and down over small areas.
C) The particles will move side to side over small areas.
D) The particles will move side to side over large areas.
Answer:
B. The particles will move up and down over small areas.
Explanation:
The picture depicts a transverse wave, which is a type of wave that transfers energy perpendicular to the direction of wave motion.
An elevator together with its passengers weights 5000 N. At a certain instant, the tension in its supporting cable is 6000 N. Determine the magnitude and direction of its instantaneous acceleration.
Explain why a Chef in a very busy restaurant would prefer a copper pot over an aluminum pot. A) The copper pot would heat faster because it has a lower specific heat value. B) The copper pot would heat slower because it has a lower specific heat value. C) The copper pot would heat faster because it has a higher specific heat value. D) The copper pot would heat slower because it has a higher specific heat value.
The correct choice is (A) The copper pot would heat faster because it has a lower specific heat value.
Explanation:Specific heat is the amount of energy required to bring a change of one degree in any material when it is heated. Since specific heat capacity of copper is low so it means that it requires less amount of heat to make it hot that is why chef will prefer copper over aluminium
Under certain conditions, when a mature plant or seed becomes or remains inactive, it is said to be
How is the color of a star related to its temperature ?
What is a scientist studying if she is interested in the flow of energy, heat, and work?
A. Systems analysis
B. Adiabatics
C. Isobarics
D. Thermodynamics
Describe how the sun provides the energy that causes convection in the atmosphere and produces winds
QUESTION 1
Which statement accurately describes what happens when water turns to steam in terms of energy?
The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a gas.
The water absorbs energy which causes chemical bonds to break, changing water to steam.
The water releases energy which causes the water molecules to have less kinetic and potential energy, changing their configuration from liquid to gas.
The water releases energy which causes chemical bonds to break, changing water to steam.
QUESTION 2
Which statement accurately describes what happens when water turns to ice in terms of energy?
The water absorbs energy which causes chemical bonds to form, changing water into ice.
The water releases energy which causes chemical bonds to form, changing water into ice.
The water absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a liquid to a solid.
The water releases energy which causes the water molecules to have less kinetic and potential energy, changing their configuration from liquid to solid.
The First Question: The water releases energy which causes the water molecules to have less kinetic and potential energy, changing their configuration from liquid to solid.
The Second: The ice absorbs energy which causes the water molecules to have more kinetic and potential energy, changing their configuration from a solid to a liquid.
Took the test and both were correct.
In the Electric Motor lab, what did you attempt to demonstrate with the electric motor?
Electric motor is a device which converts electrical energy into mechanical energy. The motor works on the principle that a coil carrying current experiences a torque when placed in a magnetic field. The torque causes the coil to rotate in the magnetic field.
An electric motor has a rectangular frame on which many turns of insulated wire is wound. The ends of the wire are connected to a source that sends current through the coil of wire. The coil is placed in between the pole pieces of a strong magnet. When current flows through the coil, the coil starts to rotate.
The rotational motion of the coil can be used to run fans, operate pumps or for other purposes that would require rotation.
Thus, the electric motor, utilizes the electrical energy provided to it and converts into mechanical energy.
Energy can be changed from one form to another. Which terms can be used to describe these changes? Check all that apply.
The answers to this is A,D.
Which of the following is the most likely impact of animals overgrazing on a patch of land?
Fertility of soil will increase
Soil erosion will increase
Human population in the area will rise
Animal population in the area will rise
A student placed a pencil in a cup of water. The pencil appears broken because light- always travels in a straight line makes the water in the glass evaporate bends when it passes through water reflects the pencil on the water's surface
Answer : The pencil appears broken because it bends when it passes through water.
Explanation :
When a student placed a pencil in a cup of water, the pencil appears broken. This is due to the refraction of light.
The bending of light when it moves from one medium to another is called refraction of light. When the light travels from denser to rarer medium, it gets bends away from the normal.
While when the light travels from rarer to a denser medium, it moves towards the normal.
So, the correct option is " bends when it passes through water ".
Which identification number is the most important component of your personal identity
5. Put these in order from least to greatest resistance:
Conductors, insolators, superconductors, semi conductors
The correct order from least to greatest resistance is: Superconductors, conductors, semiconductors, insulators.
To understand the order of resistance, let's briefly describe each material:
1. Superconductors: These materials have zero electrical resistance when cooled below a certain temperature, known as the critical temperature. This means that once a superconductor is cooled to its critical temperature, it can conduct electricity without any energy loss due to resistance. Therefore, superconductors offer the least resistance of all the materials listed.
2. Conductors: Materials that allow electricity to flow through them easily are called conductors. Common examples include metals like copper and aluminum. Conductors have low resistance, but not as low as superconductors, especially when considering superconductors at temperatures below their critical point.
3. Semiconductors: These materials have electrical properties between those of conductors and insulators. Their resistance can be altered by changing the temperature or by adding impurities (doping). Silicon and germanium are examples of semiconductors. At room temperature, they have higher resistance than most conductors but lower resistance than insulators.
4. Insulators: These materials do not allow electricity to flow through them easily. They have very high resistance and are used to prevent the flow of electric current. Examples of insulators include glass, rubber, and plastic.
In summary, the order from least to greatest resistance is:
- Superconductors (zero resistance below critical temperature)
- Conductors (low resistance)
- Semiconductors (moderate resistance)
- Insulators (high resistance)
what evidence of a chemical change is observed when rust forms on iron
Final answer:
The formation of rust on iron is evidence of a chemical change, characterized by a change in color, the release of energy, and the creation of a new substance, iron oxide.
Explanation:
When rust forms on iron, it is an indication of a chemical change occurring. This process, called corrosion, specifically rusting, involves iron (Fe) reacting with oxygen ([tex]O_2[/tex]) in the presence of water ([tex]H_2O[/tex]) to form iron oxide ([tex]Fe_2O_3[/tex]), which is rust.
The evidence of this chemical change includes a color change where iron turns from a dark grey to rusty reddish-orange, the release of energy in the form of heat (although this release is often too slow to be felt by touch), and the production of a new substance with different properties from the original iron and oxygen.