A softball is hit over a third baseman's head with some speed v0 at an angle θ above the horizontal. Immediately after the ball is hit, the third baseman turns around and begins to run at a constant velocity V=7.00m/s. He catches the ball t=2.00s later at the same height at which it left the bat. The third baseman was originally standing L=18.0m from the location at which the ball was hit.

A) Find v0. Use g=9.81m/s2 for the magnitude of the acceleration due to gravity.

Express the initial speed numerically in units of meters per second to three significant figures.

B) Find the angle θ in degrees.

Express your answer numerically in degrees to three significant figures.

Answers

Answer 1

Answer:

A) v0 = 18.8 m/s

B) θ = 31.5°

Explanation:

On the x-axis:

[tex]X_{ball} = X_{player}[/tex]

[tex]v0*cos\theta*t=L+V*t[/tex]

where

t = 2s;  L = 18m;  V = 7m/s

[tex]v0*cos\theta*2=32[/tex]

[tex]v0=16/cos\theta[/tex]

On the y-axis for the ball:

[tex]\Delta Y=v0*sin\theta*t-1/2*g*t^2[/tex]

[tex]0 = v0*sin\theta*2-19.62[/tex]

Replacing v0:

[tex]0 = tan\theta*2*16-19.62[/tex]

[tex]\theta=atan(19.62/32)=31.5\°[/tex]

Now, the speed v0 was:

v0 = 18.8m/s

Answer 2
Final answer:

The initial speed of the ball is 9.00 m/s and the angle is 0 degrees above the horizontal.

Explanation:

Part A:

To find the initial speed, we can use the horizontal distance traveled by the ball and the time it takes to reach the third baseman. The horizontal distance is the initial distance between the third baseman and the location where the ball was hit, which is 18.0m. The time is given as 2.00s. So, using the formula: distance = speed × time, we can rearrange it to find the initial speed: speed = distance / time. Plugging in the values, we get: speed = 18.0m / 2.00s = 9.00m/s.
Part B:

To find the angle, we can use the vertical distance traveled by the ball. The vertical distance is the same as the height at which the ball left the bat. Since the third baseman catches the ball at the same height, the vertical distance is zero. Using the formula: vertical distance = initial velocity × time + 0.5 × acceleration due to gravity × time squared, we can rearrange it to find the angle: angle = arctan( (2 × vertical distance × gravity) / (initial speed squared) ). Plugging in the values, we get: angle = arctan( (2 × 0 × 9.81) / (9.00^2) ) = 0 degrees.

Learn more about Projectile Motion here:

https://brainly.com/question/29545516

#SPJ3


Related Questions

The universe is filled with photons left over from the Big Bang that today have an average energy of about 2 × 10−4 eV (corresponding to a temperature of 2.7 K). As derived in lecture, the number of available energy states per unit volume for photons is ????(????)????????

Answers

Answer:

The number of available energy states per unit volume is [tex]4.01\times10^{48}[/tex]

Explanation:

Given that,

Average energy  [tex]E=2\times10^{-4}\ eV[/tex]

Photon = [tex]4\times10^{-5}\ eV[/tex]

We need to calculate the number of available energy states per unit volume

Using formula of energy

[tex]g(\epsilon)d\epsilon=\dfrac{8\pi E^2dE}{(hc)^3}[/tex]

Where, E = energy

h = Planck constant

c = speed of light

Put the value into the formula

[tex]g(\epsilon)d\epsilon=\dfrac{8\times\pi\times2\times10^{-4}\times4\times10^{-5}\times1.6\times10^{-19}}{(6.67\times10^{-34}\times3\times10^{8})^3}[/tex]

[tex]g(\epsilon)d\epsilon=4.01\times10^{48}[/tex]

Hence, The number of available energy states per unit volume is [tex]4.01\times10^{48}[/tex]

The vapor pressures (in torr) of solid and liquid chlorine are given by ln ( P s ) = 24.320 − 3777 K T ln ( P l ) = 17.892 − 2669 K T where T is the absolute temperature. Calculate the temperature and pressure at the triple point of chlorine.

Answers

Answer:

[tex]T=172.37\ K[/tex]

[tex]P_s=11.1095\ Pa[/tex]

Explanation:

Triple point is that temperature and pressure for a substance at which the chemical substance coexists in liquid, solid and gaseous state with mutual equilibrium.

At this point the equilibrium vapor pressure of solid, liquid and gas phases are mutually equal.

Given expressions of vapor pressure:

[tex]ln (P_s)=24.320 -\frac{3777  K}{T}[/tex] ........................................(1)

[tex]ln (P_l)=17.892 -\frac{2669 K}{T}[/tex] ..........................................(2)

Equating the vapor pressure of two phases of chlorine:

[tex]24.320 -\frac{3777  K}{T}=17.892 -\frac{2669 K}{T}[/tex]

[tex]T=172.37\ K[/tex]

The vapor pressure at this temperature:

[tex]ln (P_s)=24.320 -\frac{3777 }{172.37}[/tex]

[tex]P_s=11.1095\ Pa[/tex]

Final answer:

To find the triple point of chlorine, we set the vapor pressure equations of solid and liquid chlorine equal and solve for temperature, then use either equation to find the vapor pressure. However, numerical values for the vapor pressure equations are required to compute the specific temperature and pressure. The Clausius-Clapeyron equation can also be relevant in such calculations.

Explanation:

The triple point of chlorine is determined by finding the temperature and pressure at which the vapor pressures of solid and liquid chlorine are equal. Given the vapor pressure equations for solid and liquid chlorine, both can be set equal to each other and solved for temperature (T), as both will have the same pressure at the triple point.

Unfortunately, without the numerical expressions for ln(Ps) and ln(Pl), it is impossible to provide a numerical answer. Typically, this would involve algebraic manipulation to find T, and then either expression can be used to solve for the vapor pressure at the triple point.

For example, the Clausius-Clapeyron equation is used to relate the temperatures and pressures for phase changes, such as moving from solid to gas (sublimation) at the triple point. However, more information is necessary to calculate the temperature and pressure explicitly.

A potter's wheel having a radius 0.47 m and a moment of inertia of 14.2 kg · m2 is rotating freely at 53 rev/min. The potter can stop the wheel in 8.0 s by pressing a wet rag against the rim and exerting a radially inward force of 68 N. Find the effective coefficient of kinetic friction between the wheel and the wet rag.

Answers

Answer:

the effective coefficient of kinetic friction between the wheel and the wet rag is 0.31

Explanation:

given information:

radius, r = 0.47 m

moment of inertia, I = 14.2 kg[tex]m^{2}[/tex]

angular velocity, ω0 = 53 rev/min = 53 x 2π/60 = 5.5 rad/s

time, t = 8.0 s

inward force, N = 68 N

τ = I α

F r = I α, F is friction force, F = μ N

μ N r = I α

μ = I α / N r

We have to find α

ωt = ω0 + αt. ωt = 0 because the wheel stop after 8 s

0 = 5.5 + α 8

α = -5.5/8 = 0.69 [tex]rad/s^{2}[/tex]

Now we can calcultae the coeffcient of kinetik friction

μ = I α / N r

  = (14.2) (0.69) / (68) (0.47)

  = 0.31

A 0.200-kg mass is attached to the end of a spring with a spring constant of 11 N/m. The mass is first examined (t = 0) when the mass is 17.0 cm from equilibrium in the positive x-direction, and is traveling at 2.0 m/s in the positive x-direction.
a) Write an equation x(t) that describes the position of this mass as a function of time. Express this function in terms of numerical values, trigonometric functions and the time variable "t".b) Repeat for v(t), the speed of the mass as a function of time.c) Repeat for a(t), the acceleration of the mass as a function of time.

Answers

Answer:

a) x (t) = 0.3187 cos (7.416 t + 1.008) ,  b)  v = -2,363 sin (7,416 t + 1,008)

c)  a = - 17.52 cos (7.416t + 1.008)

Explanation:

The spring mass system creates a harmonic oscillator that is described by the equation

    x = Acos (wt + φ)

Where is the amplitude, w the angular velocity and fi the phase

a) Let's reduce the SI system

    x = 17.0 cm (1 m / 100 cm) = 0.170 m

The angular velocity is given by

      w = √ (k / m)

      w = √ 11 / 0.200

      w = 7.416 rad / s

Let's look for the terms of the equation with the data for time zero (t = 0 s)

      0.170 = A cos  φ

Body speed can be obtained by derivatives

      v = dx / dt

      v = -A w sin (wt + φ)

     2.0 = -A 7.416 sin φ

Let's write the two equations

     0.170 = A cos φ

     2.0 / 7.416 = -A sin φ

Let's divide those equations

    tan φ= 2.0 / (7.416 0.170)

     φ= tan⁻¹ (1,586)

     φ= 1.008 rad

We calculate A

   A = 0.170 / cos φ

   A = 0.170 / cos 1.008

   A = 0.3187 m

With these values ​​we write the equation of motion

    x (t) = 0.3187 cos (7.416 t + 1.008)

b) the speed can be found by derivatives

      v = dx / dt

      v = - 0.3187 7.416 sin (7.416 t +1.008)

      v = -2,363 sin (7,416 t + 1,008)

c) the acceleration we look for conserved

    a = dv / dt

    a = -2,363 7,416 cos (7,416 t + 1,008)

    a = - 17.52 cos (7.416t + 1.008)

The Young�s modulus for steel is 20.7*1010 N/m2. How much will a 2.5 mm diameter wire 12 cm long, be strained when it supports a load of 450 N?

Answers

Answer:

ΔL = 53.14*10⁻⁶ m

Explanation:

Given

E = 20.7*10¹⁰ N/m²

D = 2.5 mm = 2.5*10⁻³ m

L = 12 cm = 0.12 m

P = 450 N

ΔL = ?

We can use the formula

ΔL = P*L / (A*E)

where    A = π*D² / 4 = π*(2.5*10⁻³ m)² / 4

⇒   A = 4.908*10⁻⁶ m²

then

ΔL = (450 N)*(0.12 m) / (4.908*10⁻⁶ m²*20.7*10¹⁰ N/m²) = 53.14*10⁻⁶ m

A satellite beams microwave radiation with a power of 13 toward the Earth's surface, 550 away. When thebeam strikes Earth, its circular diameter is about 1000. Find the rms electric field strength of the beam at the surface of the Earth.

Answers

Answer:

[tex]E_{rms} = 2.27 V/m[/tex]

Explanation:

Power of microwave radiation = 13 kW = 13 x 10³ W

Diameter = 1000 m

Radius = R = 1000/2 = 500 m

distance, r = 500 Km

               r = 500 x 10³ m

Electric strength of beam of light is given as

   [tex]S = \dfrac{P}{A} = c\epsilon_0 E_{rms}^2[/tex]

    Now,

   [tex]E_{rms} =\sqrt{\dfrac{P}{Ac\epsilon_0}}[/tex]

 c is speed of light

 ε₀ is permittivity of free space  

 A is the area of circle  = π r² = π x (500 x 10³)² = 7.853 x 10¹¹ m²

    [tex]E_{rms} =\sqrt{\dfrac{13\times 10^3}{7.853 \times 10^{11}\times 3 \times 10^8 \times 8.85\times 10^{-12}}}[/tex]

    [tex]E_{rms} =\sqrt{\dfrac{13\times 10^3}{7.853 \times 10^{11}\times 3 \times 10^8 \times 8.85\times 10^{-12}}}[/tex]

    [tex]E_{rms} = 2.27 V/m[/tex]

A truck going 15 km/h has a head-on collision with a small car going 30 km/h. Which statement best describes the situation?

a. The truck has the greater change of momentum because it has the greater mass.
b. None of the above is necessarily true.
c. Neither the car nor the truck changes its momentum in the collision because momentum is conserved.
d. They both have the same change in magnitude of momentum because momentum is conserved.
e. The car has the greater change of momentum because it has the greater speed.

Answers

Answer:

  d. They both have the same change in magnitude of momentum because momentum is conserved.                

Explanation:

      We know that if there is no any external force on the system the linear     momentum of the system remain conserve.Or in the other other words change in the linear momentum is zero.

    Here the external force is zero ,that is why initial and the final momentum will be conserved.

     change in the momentum  for both car as well as truck will be same.Because momentum should be conserved.

Therefore the answer is -d

The statement that best describes the situation is that they both have the same change in magnitude of momentum because momentum is conserved. Option D is correct

Momentum has to do with the strength an object has when moving with speed.

For the truck and the small car given in the question, there was no external force acting on the system.

Since there was no force acting on the system, we can conclude that the linear momentum of the system is conserved that is there is no change in the linear momentum of the system.

Learn more here: https://brainly.com/question/20345538

(a) What is the length of a simple pendulum that oscillates with a period of 3.2 s on Earth, where the acceleration due to gravity is 9.80 m/s2, and on Mars, where the acceleration due to gravity is 3.70 m/s2?



Length (Earth)=?

Length (Mars)=?



(b) What mass would you need to suspend from a spring with a force constant of 20 N/m in order for the mass-spring system to oscillate with a period of 3.2 s on Earth, where the acceleration due to gravity is 9.80 m/s2, and on Mars, where the acceleration due to gravity is 3.70 m/s2?



Mass (Earth)=?

Mass (Mars)=?

Answers

Answer:

Explanation:

The expression relating length and time period

T  = 2π [tex]\sqrt{\frac{l}{g} }[/tex]

3.2 = [tex]2\pi \sqrt{\frac{l}{9.8} }[/tex]

l = 2.54 m

On Mars g = 3.7

[tex]3.2 = 2\pi \sqrt{\frac{L}{3.7} }[/tex]

L = .96 m

b )

Expression for elastic constant and time  period is as follows

[tex]T  = 2\pi \sqrt{\frac{m}{k} }[/tex]

[tex]3.2=2\pi \sqrt{\frac{m}{20} }[/tex]

m = 5.19 N/s

Time period of oscillation due to spring is not dependent on g , so same time period will be found on Mars as that on the earth.

A 3.00-m rod is pivoted about its left end. A force of 7.80 N is applied perpendicular to the rod at a distance of 1.60 m from the pivot causing a ccw torque, and a force of 2.60 N is applied at the end of the rod 3.00 m from the pivot. The 2.60-N force is at an angle of 30.0o to the rod and causes a cw torque. What is the net torque about the pivot? (Take ccw as positive.)

a. 26.4 N·m

b. 4.68 N·m

c. 8.58 N·m

d. -8.58 N·m

e. -16.4 N·m

Answers

Answer:

The net torque about the pivot is and the answer is 'c'

c. [tex]T_{net}=8.58[/tex]

Explanation:

[tex]T=F*d[/tex]

The torque is the force apply in a distance so it is the moment so depends on the way to be put it the signs so:

[tex]T_1=F_1*d_1[/tex]

[tex]T_1=7.8N*1.6m=12.48N*m[/tex]

[tex]T_2=F_2*d_2[/tex]

[tex]T_2=2.60N**cos(30)*3.0m[/tex]

[tex]T_2= - 3.9 N*m[/tex]

Now to find the net Torque is the summation of both torques

[tex]T_{net}=T_1+T_2[/tex]

[tex]T_{net}=12.48N-3.9N=8.58N[/tex]

Final answer:

The net torque about the pivot is calculated by finding the individual torques caused by each force and then subtracting the clockwise torque from the counterclockwise torque, resulting in a positive net torque of 8.58 N·m. So the correct option is c.

Explanation:

The student is asking to calculate the net torque about the pivot on a rod being acted upon by two forces causing opposing torques. To find the net torque, we need to calculate each torque and then subtract the clockwise (cw) torque from the counterclockwise (ccw) torque. Torque (τ) can be calculated using the formula τ = rFsin(θ), where r is the distance from the pivot, F is the force applied, and θ is the angle at which the force is applied relative to the rod.

Step-by-step calculation:


 Calculate the torque due to the 7.80 N force acting at 1.60 m from the pivot: τ1 = 7.80 N × 1.60 m × sin(90°) = 12.48 N·m
 Calculate the component of the 2.60 N force acting perpendicular to the rod using the sine function: Fperpendicular = 2.60 N × sin(30°) = 1.30 N
 Calculate the torque due to this force acting at 3.00 m from the pivot: τ2 = 1.30 N × 3.00 m × sin(90°) = 3.90 N·m
 Since the 2.60 N force causes a clockwise (cw) torque, it will have a negative value, so subtract τ2 from τ1 to get the net torque: Net τ = τ1 - τ2 = 12.48 N·m - 3.90 N·m = 8.58 N·m

Since the counterclockwise (ccw) torque is the positive direction, the net torque of 8.58 N·m is positive, giving us option c) 8.58 N·m as the correct answer.

A bat strikes a 0.145-kg baseball. Just before impact, the ball is traveling horizontally to the right at and it leaves the bat traveling to the left at an angle of above horizontal with a speed of If the ball and bat are in contact for 1.75 ms, find the horizontal and vertical components of the average force on the ball.

Answers

Answer

given,

mass of the baseball = 0.145 Kg

Assuming the horizontal velocity of ball = V x = 50 m/s

ball left at an angle of = 30°

At the speed of 65 m/s

time of contact  = 1.75 ms

velocity of time along horizontal direction

v_{horizontal} = -65 cos 30° - 50

                        = -106.29 m/s

Impulse = force x time

impulse is equal to change in momentum

now,

force x time = m v

[tex]F = \dfrac{mv}{t}[/tex]

[tex]F = \dfrac{0.145 \times (-106.29)}{1.75 \times 10^{-3}}[/tex]

F_{horizontal} = - 8.806 kN

now velocity in vertical component

v_{vertical} = 65 sin 30°

                  = 32.5 m/s

[tex]F = \dfrac{mv}{t}[/tex]

[tex]F = \dfrac{0.145 \times (32.5)}{1.75 \times 10^{-3}}[/tex]

F_{vertical} = 2.692 kN

(a) The horizontal component of the average force on the ball is 7,633.63 N.

(b) The vertical component of the average force on the ball is 2,929 N.

The given parameters;

mass of the bat, m₁ = 0.145 kgtime, t = 1.75 ms initial velocity of the ball to right, v₀ = 50 m/sfinal velocity of the ball to left v = 55 m/s  at 40⁰

The horizontal component of the ball's acceleration is calculated as follows;

[tex]-v_f_x = v_0_x - a_xt\\\\a_xt = v_0_x + v_f_x\\\\a_x = \frac{v_0_x + v_f_x}{t} \\\\a_x = \frac{50 \ + \ 55cos(40)}{0.00175} \\\\a_x = 52,645.7 \ m/s^2[/tex]

The horizontal component of the average force on the ball is calculated as follows;

[tex]F_x = ma_x\\\\F_x = 0.145 \times 52,645.7 \\\\F_x = 7,633.63 \ N[/tex]

The vertical component of the ball's acceleration is calculated as follows;

[tex]v_f_y = v_0y + a_yt\\\\v_f_y = 0+ a_yt\\\\a_y = \frac{v_f_y}{t} \\\\a_y = \frac{55 \times sin(40)}{0.00175} \\\\a_y = 20,200 \ m/s^2[/tex]

The vertical component of the average force on the ball is calculated as follows;

[tex]F_y = ma_y\\\\F_y = 0.145 \times 20,200\\\\F_y = 2,929 \ N[/tex]

"Your question is not complete, it seems to be missing the following information";

A bat strikes a 0.145-kg baseball. Just before impact, the ball is traveling horizontally to the right at 50.0 m/s , and it leaves the bat traveling to the left at an angle of 40 ∘ above horizontal with a speed of 55.0 m/s . The ball and bat are in contact for 1.75 ms .

find the horizontal and vertical components of the average force on the ball.

Learn more here:https://brainly.com/question/16200276

A disk of radius R = 11 cm is pulled along a frictionless surface with a force of F = 16 N by a string wrapped around the edge.At the instant when d = 30 cm of string has unwound off the disk, what is the torque exerted about the center of the disk?

Answers

Final answer:

The torque exerted about the center of the disk is 1.76 Nm.

Explanation:

To determine the torque exerted about the center of the disk, we need to calculate the perpendicular component of the force applied by the string. Since the force is applied tangentially, it can be resolved into two components: the perpendicular component and the parallel component. The perpendicular component creates the torque.

The perpendicular component of the force is equal to the tension in the string multiplied by the sine of the angle between the force and the radius. In this case, the angle is 90 degrees, so sin(90) = 1. Therefore, the torque is equal to the tension in the string multiplied by the radius of the disk.

Given that the force applied by the string is 16 N and the radius of the disk is 11 cm (0.11 m), the torque exerted about the center of the disk is 16 N * 0.11 m = 1.76 Nm.

Learn more about torque here:

https://brainly.com/question/25708791

#SPJ12

Final answer:

The torque exerted on the disk is calculated using the formula Torque = Force x Distance, where the distance is the radius of the disk. The torque in this situation is 1.76 N.m.

Explanation:

In your question, we're being asked to find the torque exerted on a disk with radius R that's being pulled along a frictionless surface by a force F. The torque exerted on an object can be calculated using the formula Torque = Force x Distance, where distance refers to the perpendicular distance from the axis of rotation to the line of action of the force. In this case, the force is being applied at the edge of the disk, and the radius of the disk serves as the lever arm distance. Therefore, the torque exerted about the center of the disk is Torque = F * R = 16 N * 0.11 m = 1.76 N.m. Please note that the radius was converted from cm to m in order to keep the units consistent.

Learn more about Torque here:

https://brainly.com/question/25708791

#SPJ2

Romeo (85.0 kg) entertains Juliet (59.0 kg) by playing his guitar from the rear of their boat at rest in still water, 2.70 m away from Juliet, who is in the front of the boat. After the serenade, Juliet carefully moves to the rear of the boat (away from shore) to plant a kiss on Romeo's cheek. (a) How far (in m) does the 75.0 kg boat move toward the shore it is facing? m

Answers

Answer:

0.7274 m

Explanation:

X denotes the distance from the reference point

M denotes the mass of the point

The center of mass of a system is given by

[tex]X_{CM}=\sum_{n=1}^n\frac{X_n\times M_n}{M_n}[/tex]

Taking the position of Juliet as the reference point

[tex]X_{CM}=\frac{59\times 0+85\times 2.7+75\times 1.35}{59+85+75}\\\Rightarrow X_{CM}=1.51027\ m[/tex]

After the boat has moved the distance between the center of mass of the boat and the shore remains the same. The change is observed relative to the rear of the boat

[tex]X_{CM}=\frac{75\times 1.35+(85+59)\times 2.7}{59+85+75}\\\Rightarrow X_{CM}=2.23767\ m[/tex]

The displacement of the boat towards the shore is

[tex]2.23767-1.51027=0.7274\ m[/tex]

By applying the conservation of momentum for a system with no external forces, the distance the boat moves when Juliet goes to the rear to kiss Romeo is 2.124 meters toward the shore.

The question involves the concept of conservation of momentum, particularly in systems with no external forces. Here, we consider a scenario where Juliet transitions from the front to the rear of the boat, causing the boat to move toward shore. To solve for the movement of the boat toward the shore, we need to realize that the total momentum of the system (Juliet, Romeo, and the boat) before and after Juliet's movement must remain constant, as there is no external force in the horizontal direction.

Initially, both Juliet and the boat are at rest, so the total initial momentum is zero. When Juliet, having mass 59.0 kg, moves a distance of 2.70 m towards Romeo, the boat will move in the opposite direction to conserve momentum.

To find the distance the boat moves, we use the conservation of momentum equation: (mass of Juliet) x (distance Juliet moves) = (mass of boat) x (distance boat moves). Rearranging gives us the distance the boat moves: distance boat moves = (mass of Juliet x distance Juliet moves) / mass of boat.

By substituting the given values, we get:

distance boat moves = (59.0 kg x 2.70 m) / 75.0 kg
distance boat moves = 2.124 m

Therefore, the boat moves 2.124 meters toward the shore when Juliet moves to the rear to kiss Romeo.

One at your summer lunar space camp activities is to launch n 1170-kg rocket from the surface of the Moon. You are a serious space camper and you launch a serious rocket: II reaches an altitude of 211 km. What gain m gravitational potential memo does the launch accomplish? The mass and radios of the Moon are 7.36 x 10^22 kg and 1740 km, respectively.

Answers

To solve this problem it is necessary to apply the concepts related to gravitational potential energy.

The change in gravitational potential energy is given by,

[tex]\Delta PE = PE_f - PE_i[/tex]

Where,

[tex]PE = \frac{GMm}{R}[/tex]

Here,

G = Gravitational Universal Constant

M = Mass of Earth

m = Mass of Object

R = Radius

Replacing we have that

[tex]\Delta PE = \frac{GMm}{R+h} -\frac{GMm}{R}[/tex]

Note that h is the height for this object. Then replacing with our values we have,

[tex]\Delta PE = \frac{GMm}{R+h} -\frac{GMm}{R}[/tex]

[tex]\Delta PE = GMm(\frac{1}{R} -\frac{1}{R+h})[/tex]

[tex]\Delta PE = (6.65*10^{-11})(7.36*10^{22})(1170)(\frac{1}{1740*10^3} -\frac{1}{211*10^3+1740*10^3})[/tex]

[tex]\Delta PE = 57264.48*10^{11}(5.1255*10^{-7}-5.747*10^{-7})[/tex]

[tex]\Delta PE = 3.56*10^8J[/tex]

Therefore the gravitational potential  is [tex]3.56*10^8J[/tex]

Children have about 1016 synapses that can transfer signals between neurons in the brain and between neurons and muscle cells. Suppose that these synapses simultaneously transmit a signal, sending 1000 calcium ions (Ca2+) across the membrane at each synaptic ending. Determine the total electric charge transfer in coulombs during that short time interval. By comparison, a lightning flash involves about 5C of charge transfer. (Note: This is a fictional scenario. All human neurons do not simultaneously produce signals.) e=1.6×10−19C.

Answers

Answer:

3.2 C

Explanation:

e = Charge of electron = [tex]1.6\times 10^{-19}\ C[/tex]

Number of synapses = [tex]10^{16}[/tex]

Signals transferred by each synapse 1000 calcium ions [tex]Ca^{2+}[/tex]

Each calcium ion carries 2 charges

Number of charges would be [tex]2\times 1000=2000[/tex]

Total charges would be

[tex]N=10^{16}\times 2000=2\times 10^{19}[/tex]

Charge is given by

[tex]Q=Ne\\\Rightarrow Q=2\times 10^{19}\times 1.6\times 10^{-19}\\\Rightarrow Q=3.2\ C[/tex]

The total electric charge transfer in coulombs during that short time interval is 3.2 C

Final answer:

In a fictional scenario where 10¹⁶ synapses simultaneously transmit signals using 1000 calcium ions each, the total electric charge transferred is 3.20 coulombs, which is significant but still less than the 5 coulombs typically involved in a lightning flash.

Explanation:

Children have about 1016 synapses that can transfer signals between neurons in the brain and between neurons and muscle cells. If these synapses simultaneously transmit a signal, sending 1000 calcium ions (Ca²⁺) across the membrane at each synaptic ending, and given that the charge of each Ca²⁺ is twice that of the electron charge (e = 1.60 × 10⁻¹⁹ C), we can calculate the total electric charge transfer in coulombs during that time interval.

The total number of calcium ions transferred is 1016 synapses × 1000 ions/synapse = 10¹⁹ ions. Since each Ca²⁺ carries twice the charge of an electron, the charge per ion is 2 × 1.60 × 10⁻¹⁹ C = 3.20 × 10⁻¹⁹ C. Therefore, the total charge transferred is 1019 ions × 3.20 × 10⁻¹⁹ C/ion = 3.20 coulombs.

Comparing this to a lightning flash, which involves about 5 coulombs of charge transfer, we can see that the total charge transfer in this hypothetical scenario is significant, yet smaller than that of a lightning flash.

A hoop, a solid cylinder, a solid sphere, and a thin, spherical shell each have the same mass of 4.01 kg and the same radius of 0.260 m. (a) What is the moment of inertia (in kg · m2) for each object as it rotates about its axis

Answers

Final answer:

The moment of inertia for each object can be calculated using specific formulas. The formulas are: For a thin hoop: I = mR², for a solid cylinder: I = (1/2)MR², for a solid sphere: I = (2/5)MR², and for a thin spherical shell: I = (2/3)MR².

Explanation:

The moment of inertia for each object as it rotates about its axis can be calculated using the formulas for moment of inertia for different objects:

1. Hoop: The moment of inertia for a thin hoop rotating about an axis perpendicular to its plane is given by the formula I = mR², where m is the mass and R is the radius of the hoop. In this case, the mass is 4.01 kg and the radius is 0.260 m, so the moment of inertia for the hoop is (4.01 kg)(0.260 m)².

2. Solid Cylinder: The moment of inertia for a solid cylinder rotating about its central axis is given by the formula I = (1/2)MR², where M is the mass and R is the radius of the cylinder. In this case, the mass is 4.01 kg and the radius is 0.260 m, so the moment of inertia for the solid cylinder is (1/2)(4.01 kg)(0.260 m)².

3. Solid Sphere: The moment of inertia for a solid sphere rotating about its central axis is given by the formula I = (2/5)MR², where M is the mass and R is the radius of the sphere. In this case, the mass is 4.01 kg and the radius is 0.260 m, so the moment of inertia for the solid sphere is (2/5)(4.01 kg)(0.260 m)².

4. Thin Spherical Shell: The moment of inertia for a thin spherical shell rotating about its central axis is given by the formula I = (2/3)MR², where M is the mass and R is the radius of the shell. In this case, the mass is 4.01 kg and the radius is 0.260 m, so the moment of inertia for the thin spherical shell is (2/3)(4.01 kg)(0.260 m)².

You are in a room in a basement with a smooth concrete floor (friction force equals 40 N) and a nice rug (friction force equals 55 N) that is 3 m by 4 m. However, you have to push a very heavy box from one corner of the rug to the opposite corner of the rug. Will you do more work against friction going around the floor or across the rug, and how much extra?

Answers

Answer:

I will do more work against friction going around the floor.

ΔW = 5 J

Explanation:

Given

Ff₁ = 40 N

Ff₂ = 55 N

a = 3 m

b = 4 m

We have to get the distance d₁ as follows

d₁ = a + b = 3 m + 4 m = 7 m

And  d₂:

d₂ = √(a² + b²) = √((3 m)² + (4 m)²)

⇒   d₂ = 5 m

then we use the equations

W₁ = Ff₁*d₁ = (40 N)(7 m) = 280 J   (work against friction going around the floor)

W₂ = Ff₂*d₂ = (55 N)(5 m) = 275 J  (work against friction going across the rug)

since  W₂ < W₁  I will do more work against friction going around the floor.

Now, we apply the formula

ΔW = W₁ - W₂ = 280 J - 275 J = 5 J

Final answer:

When pushing the heavy box from one corner of the rug to the opposite corner, you will do more work against friction going across the rug than going around the floor. The extra work against friction across the rug is calculated to be 375 J.

Explanation:

When pushing the heavy box from one corner of the rug to the opposite corner, you will do more work against friction going across the rug. The force of friction on the rug is greater than the force of friction on the smooth concrete floor. To calculate the extra work, you can use the formula:

Extra work = (force of friction on the rug - force of friction on the floor) x distance

Extra work = (55 N - 40 N) x (diagonal distance of the rug)

Since the rug is 3 m by 4 m, the diagonal distance can be calculated using the Pythagorean theorem:

diagonal distance = √(3^2 + 4^2) = √(9 + 16) = √25 = 5 m

Therefore, the extra work against friction going across the rug is (55 N - 40 N) x 5 m = 75 N x 5 m = 375 J.

An object is attached to a vertical spring and slowly lowered to its equilibrium position. This stretches the spring by an amount d. If the same object is attached to the same vertical spring but permitted to fall instead, through what maximum distance does it stretch the spring? Please show all work. Step by step.

Answers

Answer:

2d

Explanation:

For any instance equivalent force acting on the body is

[tex]mg-kd= m\frac{d}{dt}\frac{dx}{dt}[/tex]

Where

m is the mass of the object

k is the force constant of the spring

d is the extension in the spring

and

d/dt(dx/dt)=  is the acceleration of the object

solving the above equation we get

[tex]x= Asin\omega t +d[/tex]

where

[tex]\omega= \sqrt{\frac{k}{m} } = \frac{2\pi}{T}[/tex]

A is the amplitude of oscillation from the mean position.

k= spring constant , T= time period

Here  we are assuming  that at t=T/4

x= 0   since, no extension in the spring

then

A=- d

Hence

x=- d sin wt + d

now, x is maximum when sin wt=- 1

Therefore,

x(maximum)=2d

Final answer:

When an object falls onto a spring, it will stretch the spring further than if it were slowly lowered due to kinetic energy turning into additional elastic potential energy. The maximum stretch can be calculated using energy conservation, resulting in a stretch that is √(2mgd/k) where d is the equilibrium stretch, m is the mass, g is gravity, and k is the spring constant.

Explanation:

Maximum Stretch of a Spring with a Falling Object

When an object of mass m is attached to a vertical spring and slowly lowered to its equilibrium position, the spring stretches by a distance d, producing potential energy in the spring equal to k·d²/2. Meanwhile, the work done by gravity equals md. If instead the object is allowed to fall and attaches to the spring, the spring will stretch further due to the kinetic energy acquired during the fall, turning into additional elastic potential energy at maximum stretch.

If we assume no energy losses due to non-conservative forces, the energy conservation equation just before the object attaches to the spring would be:

Kinetic energy + gravitational potential energy = elastic potential energy at maximum extension.

Since the object starts from rest at a height d above the equilibrium position:

1/2·mv² + mgd = 1/2·k·x² (with x being the total distance the spring stretches).

At the point of maximum stretch, all kinetic energy has been converted into elastic potential energy, and the object is momentarily at rest, so:

mgd = 1/2·k·x²

In the special case where there are no other forms of energy conversion (like heat due to air resistance), the spring will stretch maximum distance x satisfying:

x = √(2·md / k)

Using the initial condition that the spring stretches by d when the object is slowly lowered, we can deduce that the object in free fall will stretch the spring more than d due to extra energy from its fall. The exact factor would depend on the stiffness of the spring (expressed by k) and the mass of the object (m).

A uniform, thin rod of length h and mass M is held vertically with its lower end resting on a frictionless horizontal surface. The rod is then released to fall freely. (a) What is the speed of its center of mass just before it hits the horizontal surface? (Use any variable or symbol stated above along with the following as necessary: g for the acceleration of gravity.)

Answers

Final answer:

The speed of the center of mass just before it hits the horizontal surface can be found using the principle of conservation of energy.

Explanation:

To find the speed of the center of mass just before it hits the horizontal surface, we can use the principle of conservation of energy. When the rod falls freely, it gains gravitational potential energy which is converted into kinetic energy. At the lowest point, where the center of mass hits the horizontal surface, all the gravitational potential energy is converted into kinetic energy. Therefore, we can equate the gravitational potential energy at the top to the kinetic energy at the bottom:

mgh = (1/2)mv^2

Where m is the mass of the rod, g is the acceleration due to gravity, h is the height of the rod, and v is the speed of the center of mass. Solving for v:

v^2 = 2gh

v = sqrt(2gh)

Learn more about Center of mass here:

https://brainly.com/question/28996108

#SPJ3

Metal surfaces on spacecraft in bright sunlight develop a net electric charge.

Do they develop a negative or a positive charge?

Answers

Answer:

Positive.

Explanation:

As a consequence of the photoelectric effect, electrons that will get hit by sufficiently energetic photons will abandon the metal surfaces exposed to bright sunlight. This decreases the negative charge of the surface, thus causing it to develop a positive net charge.

The escape velocity on earth is 11.2 km/s. What fraction of the escape velocity is the rms speed of H2 at a temperature of 31.0 degrees Celsius on the earth? Note that virtually all the molecules will have escaped the earth's atmosphere if this fraction exceeds 0.15.

Answers

To solve this problem it is necessary to apply the concept related to root mean square velocity, which can be expressed as

[tex]v_{rms} = \sqrt{\frac{3RT}{n}}[/tex]

Where,

T = Temperature

R = Gas ideal constant

n = Number of moles in grams.

Our values are given as

[tex]v_e =11.2km/s = 11200m/s[/tex]

The temperature is

[tex]T = 30\°C = 30+273 = 303K[/tex]

Therefore the root mean square velocity would be

[tex]v_{rms} = \sqrt{\frac{3(8.314)(303)}{0.002}}[/tex]

[tex]v_{rms} = 1943.9m/s[/tex]

The fraction of velocity then can be calculated between the escape velocity and the root mean square velocity

[tex]\alpha = \frac{v_{rms}}{v_e}[/tex]

[tex]\alpha = \frac{1943.9}{11200}[/tex]

[tex]\alpha = 0.1736[/tex]

Therefore the fraction of the scape velocity on the earth for molecula hydrogen is 0.1736

For fully developed laminar pipe flow in a circular pipe, the velocity profile is given by u(r) = 2 (1 - r2/R2) in m/s, where R is the inner radius of the pipe. Assuming that the pipe diameter is 3.1 cm, find the (a) maximum and (b) average velocities in the pipe as well as (c) the volume flow rate.

Answers

Answer:

a)Uo= 2 m/s

b)[tex]u_{avg}=1 \ m/s[/tex]

c)Q=7.54  x 10⁻⁴ m³/s

Explanation:

Given that

[tex]u(r)=2\left(1-\dfrac{r^2}{R^2}\right)[/tex]

Diameter ,D= 3.1 cm

Radius ,R= 1.55 cm

We know that in the pipe flow the general equation for laminar fully developed flow given as

[tex]u(r)=U_o\left(1-\dfrac{r^2}{R^2}\right)[/tex]

Uo=Maximum velocity

Therefore maximum velocity

Uo= 2 m/s

The average velocity

[tex]u_{avg}=\dfrac{U_o}{2}[/tex]

[tex]u_{avg}=\dfrac{2}{2}\ m/s[/tex]

[tex]u_{avg}=1 \ m/s[/tex]

The volume flow rate

[tex]Q=u_{avg}. A[/tex]

[tex]Q=\pi R^2\times u_{avg}\ m^3/s[/tex]

[tex]Q=\pi \times (1.55\times 10^{-2})^2\times 1\ m^3/s[/tex]

Q=0.000754 m³/s

Q=7.54  x 10⁻⁴ m³/s

A ball is thrown straight up. What are the velocity and acceleration of the ball at the highest point in its path?
a. v = 9.8 m/s up, a = 0.
b. v = 0, a = 9.8 m/s2 down.
c. v = 0, a = 9.8 m/s2 up.
d. v = 9.8 m/s down, a = 0.
e. v = 0, a = 0.

Answers

Answer:

b. v = 0, a = 9.8 m/s² down.

Explanation:

Hi there!

The acceleration of gravity is always directed to the ground (down) and, near the surface of the earth, has a constant value of 9.8 m/s². Since the answer "b" is the only option with an acceleration of 9.8 m/s² directed downwards, that would solve the exercise. But why is the velocity zero at the highest point?

Let´s take a look at the height function:

h(t) = h0 + v0 · t + 1/2 g · t²

Where

h0 = initial height

v0 = initial velocity

t = time

g = acceleration due to gravity

Notice that the function is a negative parabola if we consider downward as negative (in that case "g" would be negative). Then, the function has a maximum (the highest point) at the vertex of the parabola. At the maximum point, the slope of the tangent line to the function is zero, because the tangent line is horizontal at a maximum point. The slope of the tangent line to the function is the rate of change of height with respect to time, i.e, the velocity. Then, the velocity is zero at the maximum height.

Another way to see it (without calculus):

When the ball is going up, the velocity vector points up and the velocity is positive. After reaching the maximum height, the velocity vector points down and is negative (the ball starts to fall). At the maximum height, the velocity vector changed its direction from positive to negative, then at that point, the velocity vector has to be zero.

A 2.3 g spider is hanging at the end of a silk thread. You can make the spider bounce up and down on the thread by tapping lightly on his feet with a pencil. You soon discover that you can give the spider the largest amplitude on his little bungee cord if you tap exactly once every 3 seconds.What is the spring constant of the silk thread?

Answers

Answer:[tex]k=10.091\times 10^{-3} N/m[/tex]

Explanation:

Given

mass of spider [tex]m=2.3 gm[/tex]

Largest amplitude can be obtained by Tapping after every 3 second

i.e. Time period of oscillation is [tex]T= 3 s[/tex]

considering spider to execute Simple harmonic motion

time of oscillation is given by

[tex]T=2\pi\sqrt{\frac{m}{k}}[/tex]

substituting values

[tex]3=2\pi \sqrt{\frac{2.3\times 10^{-3}}{k}}[/tex]

[tex]\frac{3}{2\pi }=\sqrt{\frac{2.3\times 10^{-3}}{k}}[/tex]

[tex]0.477=\sqrt{\frac{2.3\times 10^{-3}}{k}}[/tex]

[tex](0.477)^2=\frac{2.3\times 10^{-3}}{k}[/tex]

[tex]\frac{2.3\times 10^{-3}}{k}=0.228[/tex]

[tex]k=10.091\times 10^{-3} N/m[/tex]

The buoyant force on a ball of weight W, dropped in a container of water is F. If the same ball is dropped into a container of liquid with half the density of water, the buoyant force on the ball will be

Answers

Answer:[tex]\frac{F}{2}[/tex]

Explanation:

Given

weight of Object is W

Buoyant Force [tex]F_b=F[/tex]

let the density of First Liquid is  [tex]\rho [/tex]

volume of object [tex]=\frac{W}{\rho _0g}[/tex]

where [tex]\rho _0[/tex]=object density

thus buoyant Force in first Liquid is

[tex]F=\rho \times \frac{W}{\rho _0g}\times g=\frac{W\rho }{\rho _0}[/tex]

For Second Liquid

[tex]F'=\frac{\rho }{2}\times \frac{W}{\rho _0g}\times g=\frac{W\rho }{2\rho _0}[/tex]

[tex]F'=\frac{F}{2}[/tex]

andy is entering early adolescence. although he used to be a big help to his mother by doing household chores, he now refuses, saying that the chores are "women's jobs." he also has a new interest in competitive sports and is being assertive in his interactions with friends. andy is most likely experiencing
a. gender intensification.
b. gender segregation.
c. gender typing.
d. the timing of puberty effect

Answers

Answer:

a. gender intensification

Explanation:

This theory states that in the adolescence both girls and boys are pressured to follow gender roles established culturally.

Which is true about the inductance of a solenoid?
O It depends on the number of turns per unit length but not on the area of each turn.
O It depends on the area of each turn but not on the number of turns per unit length.
O It depends on the number of turns per unit length and the area of each turn.

Answers

Answer:

It depends on the number of turns per unit length and the area of each turn.

Explanation:

The inductance of a long solenoid can be approximated by:

[tex]L=\mu \frac{N^2A}{L}[/tex]

Where:

[tex]N=Number\hspace{3}of\hspace{3}turns\\A=Cross-sectional\hspace{3}area\\L=Length\hspace{3}of\hspace{3}the\hspace{3}coil\\\mu=Magnetic\hspace{3}permeability[/tex]

Therefore, according to this, we can conclude that  the inductance of a solenoid depends on the number of turns per unit length and the area of each turn.

A car speedometer that is supposed to read the linear speed of the car uses a device that actually measures the angular speed of the tires. If larger-diameter tires are mounted on the car instead, how will that affect the speedometer reading? The speedometer

a. will still read the speed accurately.
b. will read low.
c. will read high.

Answers

The speedometer will read low as larger diameter tires are mounted on the car...

A speedometer often known as aspeed meter do act as a boundary or gauge that helps us to take note, measures and displays the speed of a moving automobile.

The speedometer will read low.

An increase in the radius of the tires does not increase the speed measured by a speedometer.

An increase in the size of the tires will cause the car to move faster than it would with smaller tires. This will leaf tothe speed of the car will be much more than what the speedometer is reading.

Conclusively we can say that option b is the best option that explains what the statement means

Learn more from

Learn more from

https://brainly.com/question/12105785

Investigators are exploring ways to treat milk for longer shelf life by using pulsed electric fields to destroy bacterial contamination. One system uses 8.0-cm-diameter circular plates separated by 0.95 cm. The space between the plates is filled with milk, which has the same dielectric constant as that of water. The plates are briefly charged to 30,000 V. What is the capacitance of the system? How much charge is on each plate when they are fully charged?

Answers

Answer:

C = 3.77*10⁻¹⁰ F = 377 pF

Q = 1.13*10⁻⁵ C

Explanation:

Given

D = 8.0 cm = 0.08 m

d = 0.95 cm = 0.95*10⁻² m

k = 80.4  (dielectric constant of the milk)

V = 30000 V

C = ?

Q = ?

We can get the capacitance of the system applying the formula

C = k*ε₀*A / d

where

ε₀ = 8.854*10⁻¹² F/m

and   A = π*D²/4 = π*(0.08 m)²/4

⇒  A = 0.00502655 m²

then

C = (80.4)*(8.854*10⁻¹² F/m)*(0.00502655 m²) / (0.95*10⁻² m)

⇒  C = 3.77*10⁻¹⁰ F = 377 pF

Now, we use the following equation in order to obtain the charge on each plate when they are fully charged

Q = C*V

⇒  Q = (3.77*10⁻¹⁰ F)*(30000 V)

⇒  Q = 1.13*10⁻⁵ C

Final answer:

The capacitance of the system is calculated by applying the physics of parallel-plate capacitors, using characteristics of the plates and the milk as the dielectric constant. The charge on each plate when fully charged is then deduced from the calculated capacitance and the applied voltage.

Explanation:

The concept this question revolves around is the electrical mechanism in a parallel-plate capacitor. This system uses the property of the dielectric constant (the same as water for milk, in this case) of the substance between the plates.

The capacitance of such a system may be calculated as C = ε * (A/d), where ε denotes the permittivity of the substance (milk), A is the area of one of the plates, and d is the distance separating the plates. For a circular plate, the area can be computed as A = π * (D/2)^2 where D is the diameter of the plate.

Here, ε = 8.854*10^-12 F/m (for water), D = 8 cm = 0.08 m (converted into meters for unit consistency), and d = 0.95 cm = 0.0095 m. Substituting these values, we compute the capacitance C which should then be used to calculate the charge on each plate when fully charged using the formula, Q = C * V, where V is the voltage applied.

Learn more about Parallel-Plate Capacitor here:

https://brainly.com/question/30312803

#SPJ12

A stone with heat capacity C = 1.2 J/K is left outside on a cold day to reach a temperature of 273.15 K. The stone is then brought inside where the air temperature is 293.15 K. The stone is used as the cold side of a reversible engine. (The air is the hot side.) What is the maximum work that can be accomplished ?

Answers

To solve the problem it is necessary to apply the concepts related to Helmholtz free energy. By definition in a thermodynamic system the Helmholtz energy is defined as

[tex]\Delta F = \Delta U - T\Delta S[/tex]

Where,

[tex]\Delta U[/tex] is the internal energy equivalent to

[tex]\Delta U = C \Delta T[/tex]

And [tex]\Delta S[/tex] means the change in entropy represented as

[tex]\Delta S = C ln \frac{T_2}{T_1}[/tex]

Note: C means heat capacity.

Replacing in the general equation we have to

[tex]\Delta F = C \Delta T - T C ln \frac{T_2}{T_1}[/tex]

The work done of a thermodynamic system is related by Helmholtz free energy as,

[tex]W = - \Delta F[/tex]

[tex]W = -(C \Delta T - T C ln \frac{T_2}{T_1})[/tex]

[tex]W = T C ln \frac{\T_2}{T_1}-C \Delta T[/tex]

Replacing with our values we have,

[tex]W = (293.15)(1.2)ln(\frac{293.15}{273.15})-(1.2)(20)[/tex]

[tex]W = 0.858 J[/tex]

Therefore the maximum work that can be accomplished is 0.858J

Final answer:

The maximum work that can be accomplished by the stone is 24 J.

Explanation:

To find the maximum work that can be accomplished by the stone as the cold side of a reversible engine, we can use the formula for the maximum work of a Carnot engine:



Wmax = Qh - Qc



where Qh is the heat transferred from the hot reservoir and Qc is the heat transferred to the cold reservoir.



Since the stone is the cold side, Qc is the negative of the heat capacity times the temperature difference:



Qc = -C(Tin - Tcold)



Substituting the given values, we have:



Qc = -(1.2 J/K)(293.15 K - 273.15 K) = -24 J



Since Qh is the negative of Qc, we have:



Qh = -Qc = -(-24 J) = 24 J



Therefore, the maximum work that can be accomplished by the stone is:



Wmax = 24 J

Learn more about Maximum work of a Carnot engine here:

https://brainly.com/question/34266440

#SPJ3

Two identical masses are connected to two different flywheels that are initially stationary. Flywheel A is larger and has more mass, but has hexagonal sections where material has been removed. The attached masses are released from rest and allowed to fall a height h.Which of the following statements about their angular accelerations is true? a. The angular acceleration of the two flywheels is different but it is impossible to tell which is greater. b. The angular acceleration of flywheel A is greater The angular acceleration of flywheel B is greater. c. Not enough information is provided to determine. d. The angular accelerations of the two flywheels are equal.

Answers

Final answer:

The angular acceleration of the two flywheels will be different due to their differing moments of inertia, which depend on both the mass and its distribution relative to the rotational axis. The removed hexagonal sections on flywheel A alters its moment of inertia.

Explanation:

The answer to your question is: The angular acceleration of the two flywheels is different but it is impossible to tell which is greater.

The reason for this is tied to the concept known as moment of inertia, an object's resistance to changes in its state of rotation. The moment of inertia depends not only on the mass of an object, but also on its distribution of mass relative to the axis around which it rotates. The hexagonal sections removed from flywheel A affect its distribution of mass, potentially lowering its moment of inertia.

Angular acceleration is the rate of change of angular velocity over time, and is given by the equation: torque = moment of inertia x angular acceleration. The torque on both flywheels is the same, since the same force is exerted on both through the identical masses falling from height h. Therefore, if the moments of inertia of the two flywheels are different, then their angular accelerations must also be different as they both satisfy the above equation.

Learn more about Angular Acceleration here:

https://brainly.com/question/30238727

#SPJ12

Final answer:

The angular acceleration of the two flywheels is different but it is impossible to tell which is greater.

Explanation:

The angular acceleration of the two flywheels is different but it is impossible to tell which is greater. The angular acceleration of a flywheel depends on both its mass and its moment of inertia, which takes into account the distribution of mass relative to the axis of rotation.

In this case, the larger mass of flywheel A would tend to result in a smaller angular acceleration, but the removal of material in hexagonal sections could change the moment of inertia and potentially increase the angular acceleration. Without specific information about the moment of inertia for each flywheel, it is impossible to determine which one would have a greater angular acceleration.

Learn more about angular acceleration here:

https://brainly.com/question/32293403

#SPJ11

Other Questions
The adult human brain contains almost ________ of the body's neural tissue. The adult human brain contains almost ________ of the body's neural tissue. 25 percent 68 percent 35 percent 15 percent 97 percent Representative democracy in the United States seeks to maintain consent of the governed best by? Cindy is a baker and runs a large cupcake shop.She has already hired 11 employees and is thinking of hiring a 12th.Cindy estimates that a 12th worker would cost her $100 per day in wages and benefits while increasing her total revenue from $2,600 per day to $$2,750 per day.Should Cindy hire a 12th worker? LO14.2A. YesB. NoC. You need more information to figure this out A surveying team set up some equipment 104104 ft from the base of a tree in order to sight the top of the tree. From ground level, they measure the angle of elevation to be 27.527.5. If the calculated height needs to be accurate to within 1.51.5%, what is the allowed error in the angle measurement? (Assume the 104104 ft measurement is 100% accurate.) Using a large value for order k in the moving averages method is effective ina. smoothing out random fluctuations.b. eliminating the effect of seasonal variations in the time series.c. tracking changes in a time series more quickly.d. providing a forecast when only the most recent time series are relevant. What was the approximate total population of Texas when it was established as the republic of texas?A) 2,000B) 20,000C)35,000D)215,000 _____ in his Farewell Address said that the "spirit of party . . . agitates the community with ill-founded jealousies and false alarms, kindles the animosity of one part against another, foments occasionally riot and insurrection."a. George Washingtonb. John Adamsc. Thomas Jeffersond. Andrew Jacksone. Daniel Webster Two years back, the Republic of Terbia, a developed economy, experienced a massive boom in the information technology (IT) industry. The rapid expansion of credit to the firms in this industry resulted in a significant increase in employment and prices in the economy. However, due to overvaluation and speculation in the market, stock prices of these firms fell sharply. IT being one of the most important sectors, this downturn affected the economy adversely, leading to a recession. Alicia White, an industry expert, suggests that expansionary monetary policy by the central bank is necessary to induce greater spending in the economy. However, Jaime Russell, a teacher at a community college, disagrees. According to him, increasing the supply of money would not help. The only possible impact of a fall in the interest rate would be an increase in aggregate supply. This, in turn, will reduce prices and profits further. Instead, the government should use expansionary fiscal policies to boost aggregate demand. Alicia and Jaime are most likely to have a difference of opinion on which of the following?A. Falling prices in Terbia could indicate a slump in aggregate demand.B. An expansionary fiscal policy can lead to an increase in prices in Terbia.C. Expansionary monetary policy is more effective under a flexible exchange rate system.D. Consumers in Terbia are confident that the economy will turn around in the near future.E. Cyclical unemployment in Terbia has increased in recent months. The shear modulus of steel is 8.1 1010 N/m2. A steel nail of radius 7.5 104 m projects 0.040 m horizontally outward from a wall. A man hangs a wet raincoat of weight 28.5 N from the end of the nail. Assuming the wall holds its end of the nail, what is the vertical deflection of the other end of the nail? A coil 3.95 cm radius, containing 520 turns, is placed in a uniform magnetic field that varies with time according to B=( 1.20102 T/s )t+( 3.45105 T/s4 )t4. The coil is connected to a 560- resistor, and its plane is perpendicular to the magnetic field. You can ignore the resistance of the coil.a-)Find the magnitude of the induced emf in the coil as a function of time.Find the magnitude of the induced emf in the coil as a function of time.E= 1.07102 V +( 1.05104 V/s3 )t3E= 3.36102 V +( 8.26105 V/s3 )t3E= 3.36102 V +( 3.30104 V/s3 )t3E= 1.07102 V +( 3.30104 V/s3 )t3b-)What is the current in the resistor at time t0 = 5.25 s ? Which statement best describes a polygon?A. a closed plane figure with three or more sides that are straight B. a closed plane figure with four or more sidesC. an open or closed plane figure D. an open or closed plane figure with three or more sides Reset Next Which of these is the idea that anyone can enjoy financial success in the United States?A. The Gold RushB. The American DreamC. Economic RightsD. All of the above Michelle is an active participant in the rental condominium property she owns. During the year, the property generates a ($23,500) loss; however, Michelle has sufficient tax basis and at-risk amounts to absorb the loss. If Michelle has $132,000 of salary, $11,700 of long-term capital gains, $4,700 of dividends, and no additional sources of income or deductions, how much loss can Michelle deduct? The question is below. :3 Which ordered pairs are on the line with equation 3x-y=2. a) (0, -2)b) (-3, 4)c) (1, -5) What is the percent of decrease from 320 to 32?A.)10%B.)90%c.)100%D.)288% ___________ is a measure of the degree to which the phenotypic variation of a given trait is due to genetic factors. For accounting errors, which of the below sentences is true?a.They represent intentional sabotage of controls.b.They are problems caused by failures in systems, procedures, and policies.c.They represent fraud and normally result in legal action being taken.d.They are primarily caused by lack of training. Which statements are true? a. The evaporation of water is an exothermic process. b. A combustion reaction is exothermic. c. When energy is transferred as heat from the surroundings to the system, Deta H is negative. d. When energy is transferred as heat from the system to the surroundings, Deta H is negative. e. for an exothermic reaction Deta H is positive. f. for an endothermic reaction Deta H is positive. Sunil was illustrating the ease with which his company's newly designed lawnmower can be operated. However, during the presentation, the lawnmower stopped working. What is the most appropriate way for Sunil to handle this situation?