Answer:
114 K
Explanation:
Given data
Volume of oxygen (V): 629 mL = 0.629 LPressure of oxygen (P): 0.500 atmMoles of oxygen (n): 0.0337 molTemperature (T): ?We can calculate the temperature at which the student collected the oxygen using the ideal gas equation.
[tex]P \times V = n \times R \times T\\T = \frac{P \times V}{n \times R} = \frac{0.500atm \times 0.629L}{0.0337mol \times 0.0821atm.L/mol.K} = 114 K[/tex]
The oxygen gas was collected at 114 K.
Answer:
The temperature is 114 K or -159ºC
Explanation:
We must use the ideal gas equation to calculate the temperature in K:
P x V = n x R x T
⇒ T = (P x V)/(n x R)
We have to introduce the data expressed in the adequate units:
V = 629 ml x 1 L/1000 ml= 0.629 L
n = 0.0337 moles
P = 0.500 atm
R = 0.082 L.atm/K.mol (it is the gas constant)
T = (P x V)/(n x R) = (0.500 atm x 0.629 L)/(0.0337 mol x 0.082 L.atm/K.mol)
T = 113.8 K ≅ 114 K
Thus, the temperature is 114 K or -159ºC.
For Kinetic Trial 2, Alicia was distracted when the color change occurred but decided to record the time lapse read from her watch. Will this distraction cause an increase or decrease in he slop of the log (rate) vs log [I-]0? Explain.
The distraction during Kinetic Trial 2 will not affect the slope of the log (rate) vs log [I-]0. The relationship between the log of the rate and the log of the initial concentration of I- is determined by the reaction kinetics and is not influenced by external factors like distractions.
Explanation:The distraction that Alicia experienced when the color change occurred during Kinetic Trial 2 will not affect the slope of the log (rate) vs log [I-]0.
This is because the distraction only affected the timing of the color change, not the actual reaction rate.
The relationship between the log of the rate and the log of the initial concentration of I- is determined by the reaction kinetics and is not influenced by external factors like distractions.
Which of the following aqueous solutions are good buffer systems? . 0.37 M hydrocyanic acid + 0.24 M sodium cyanide 0.14 M sodium nitrite + 0.27 M nitrous acid 0.21 M hypochlorous acid + 0.13 M potassium hypochlorite 0.20 M nitric acid + 0.22 M potassium nitrate 0.32 M ammonium bromide + 0.31 M ammonia
Answer : The good buffer systems are, (a), (b), (c) and (e)
Explanation :
Buffer : It is a solution that prevent any changes in the pH of the solution on the addition of an acidic and basic components.
Or, it is a solution that maintain the pH of the solution by adding the small amount of acid or a base.
There are two types of buffer which are acidic buffer and basic buffer.
Acidic buffer : It is the solution that have the pH less than 7 and it contains weak acid and its salt. For example : Acetic acid (weak acid) and sodium acetate (salt).
Basic buffer : It is the solution that have the pH more than 7 and it contains weak base and its salt. For example : Ammonia (weak base) and ammonium chloride (salt).
The conditions for a good buffer system is:
(1) a weak acid and its conjugate base.
(2) a weak base and its conjugate acid.
(a) 0.37 M hydrocyanic acid + 0.24 M sodium cyanide
It is a combination of weak acid and its conjugate base. So, it is a good buffer.
(b) 0.14 M sodium nitrite + 0.27 M nitrous acid
It is a combination of weak acid and its conjugate base. So, it is a good buffer.
(c) 0.21 M hypochlorous acid + 0.13 M potassium hypochlorite
It is a combination of weak acid and its conjugate base. So, it is a good buffer.
(d) 0.20 M nitric acid + 0.22 M potassium nitrate
It is a combination of strong acid. So, it will not form buffer solution.
(e) 0.32 M ammonium bromide + 0.31 M ammonia
It is a combination of weak base and its conjugate acid. So, it is a good buffer.
Hence, the good buffer systems are, (a), (b), (c) and (e)
Good buffer systems are those that consist of a weak acid and its conjugate base or a weak base and its conjugate acid. The given combinations that are good buffer systems include hydrocyanic acid and sodium cyanide, sodium nitrite and nitrous acid, hypochlorous acid and potassium hypochlorite, and ammonium bromide and ammonia.
Explanation:The aqueous solutions that are good buffer systems from the provided options are:
0.37 M hydrocyanic acid + 0.24 M sodium cyanide0.14 M sodium nitrite + 0.27 M nitrous acid0.21 M hypochlorous acid + 0.13 M potassium hypochlorite0.32 M ammonium bromide + 0.31 M ammoniaA good buffer system consists of a weak acid and its conjugate base or a weak base and its conjugate acid. These pairs are capable of neutralizing small amounts of added acid or base, thus maintaining a relatively stable pH in the solution. In contrast, solutions like 0.20 M nitric acid + 0.22 M potassium nitrate do not form a buffer because nitric acid is a strong acid and does not create a conjugate weak acid-base pair needed for buffering.
A variation of the acetamidomalonate synthesis can be used to synthesize serine. The process involves the following steps: Ethoxide ion deprotonates diethyl acetamidomalonate, forming enolate anion 1; Enolate anion 1 makes a nucleophilic attack on formaldehyde, forming tetrahedral intermediate 2; Protonation of the oxyanion forms alcohol 3; Acid hydrolysis yields dicarboxyamino alcohol 4; Decarboxylation leads to the final amino acid. Write out the mechanism on a separate sheet of paper, and then draw the structure of dicarboxyamino alcohol 4.
Answer:
See detailed mechanism in the image attached
Explanation:
The mechanism shown in detail below is the synthesis of serine in steps.
The first step is the attack of the ethoxide ion base on the diethyl acetamidomalonate substrate giving the enolate and formaldehyde.
The second step is the protonation of the oxyanion from (1) above to form an alcohol as shown.
Acid hydrolysis of the alcohol formed in (3) above yields a tetrahedral intermediate, a dicarboxyamino alcohol.
Decarboxylation of this dicarboxyamino alcohol yields serine, the final product as shown in the image attached.
Gaseous ammonia (NH3) reacts with gaseous oxygen to form gaseous nitrogen monoxide and gaseous water. Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer:
The chemical equation is given as:
[tex]4NH_3(g)+5O_2(g)\rightarrow 4NO(g)+6H_2O(g)[/tex]
Explanation:
When gaseous ammonia reacts with gaseous oxygen it gives nitrogen monoxide gas and water vapors as product.
The chemical equation is given as:
[tex]4NH_3(g)+5O_2(g)\rightarrow 4NO(g)+6H_2O(g)[/tex]
According to reaction, 4 moles of ammonia reacts with 5 moles of oxygen gas to give 4 moles of nitrogen monoxide gas and 6 moles of water vapor.
To write the skeletal equation, begin by writing the chemical formula for each reactant and product.
Reactants:
1. Ammonia's chemical formula is given as NH3.
2. Gaseous oxygen exists as a diatomic molecule with the chemical formula O2.
Products:
1. Nitrogen monoxide has the chemical formula of NO.
2. The chemical formula for water is H2O.
Therefore, the skeletal equation is written as:
NH3(g)+O2(g)→NO(g)+H2O(g)
Now count the number of each atom on each side of the equation to determine if the equation is balanced.
Reactants
1N atom
3H atoms
2O atoms
Products
1N atom
2H atoms
2O atoms
Begin by balancing the number of hydrogen atoms by adding a coefficient of 2 to NH3 and a coefficient of 3 to H2O. Next, balance the number of nitrogen atoms by adding a coefficient of 2 to NO. Now there are two oxygen atoms on the reactant's side and five oxygen atoms on the product's side of the reaction. Since only whole number coefficients should be used, all coefficients need to be increased by a factor of two to balance the oxygen atoms. Thus the coefficient for NH3 is 4, the coefficient for H2O is 6, and the coefficient for NO is 4. Finally, balance the oxygen atoms by adding a coefficient of 5 to O2. The balanced equation is:
4NH3(g)+5O2(g)→4NO(g)+6H2O(g)
Ethers react with HI to form two cleavage products. One of the products might react further with HI. In the first box below draw the two major products that could be recovered after treatment with one equivalent of HI. In the second box draw the two major products that could be recovered after treatment with excess HI. (If a product of the first step does not undergo additional reaction with excess HI, repeat its structure in the second box.)
Answer:
Explanation:
the solution is solved below
When ethers react with HI, treatment with one equivalent of HI produces an alcohol and an alkyl iodide as major products. Treatment with excess HI yields both alkyl iodides as major products.
Ethers react with HI to form two cleavage products. When treated with one equivalent of HI, the major products that could be recovered are an alcohol and an alkyl iodide. The alcohol is formed by the substitution of the ether oxygen with a hydrogen atom from HI, and the alkyl iodide is formed by the substitution of one of the alkyl groups of the ether with iodine.
When treated with excess HI, the major products that could be recovered are both alkyl iodides. The initial products from the first step do not further react but are still recovered.
Learn more about Ethers reacting with HI here:
https://brainly.com/question/33791556
#SPJ3
A 1.31 mol sample of CO2 gas is confined in a 31.4 liter container at 19.0 �C.
If the volume of the gas sample is decreased to 15.7 L holding the temperature constant, the number of molecule-wall collisions per unit area per unit timewill
A. remain the same
B. not enough information to answer the question
C. increase
D. decrease
2. A 1.18 mol sample of CO2 gas is confined in a 27.8 liter container at 14.5 �C.
If the volume of the gas sample is increased to 55.7 L holding the temperature constant, the average kinetic energy will
A. remain the same
B. decrease
C. increase
D. not enough information to answer the question
3.A 0.855 mol sample of Xe gas is confined in a 20.5 liter container at 19.6 �C.
If the volume of the gas sample is decreased to 10.3 L, holding the temperature constant, the pressure will increase. Which of the following kinetic theory ideas apply?
Choose all that apply.
A. With less available volume, the molecules hit the walls of the container more often.
B. At lower volumes molecules have higher average speeds.
C. With higher average speeds, on average the molecules hit the walls of the container with more force.
D. For a given gas at constant temperature, the force per collision is constant. Some other factor must cause the pressure increase.
E. None of the Above
Ideal gas law is valid only for ideal gas not for vanderwaal gas. The equation used for ideal gas is PV=nRT. The number of molecule-wall collisions per unit area per unit time will remain the same.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
If the volume of the gas sample is decreased to 15.7 L holding the temperature constant, the number of molecule-wall collisions per unit area per unit time will remain the same.
Therefore, the number of molecule-wall collisions per unit area per unit time will remain the same.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ5
What is the name of this compound?
CH3CH2OCH2CH2CH3
Answer:
(B) ethyl-propyl-ether
Explanation:
ethyl-propyl-ether
a step by step explanation
As the compound has ether as functional group the name of the compound is ethyl propyl ether.
Functional group is defined as a substituent or group of toms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
The compound has ether as functional group,thus the name of the compound is ethyl propyl ether.
Learn more about functional group,here:
https://brainly.com/question/33836452
#SPJ6
What is the scaling factor of the molar mass of
this compound, having an empirical formula of
CH20, is 150 g/mol?
The scaling factor is determined by dividing the compound's actual molar mass (150 g/mol) by the molar mass of its empirical formula CH2O (30 g/mol), which results in a factor of 5. The molecular formula of the compound is C5H10O5.
Explanation:The student's question is asking about the scaling factor of a compound's molar mass based on its empirical formula. The empirical formula is CH2O, which has a molar mass of 30 g/mol (C = 12, H = 1 x 2 = 2, O = 16). If the compound's actual molar mass is 150 g/mol, we divide the actual molar mass by the empirical formula's molar mass to find the scaling factor.
Scaling factor = Actual molar mass / Empirical formula molar mass
= 150 g/mol / 30 g/mol
= 5
Thus, the actual compound's formula is obtained by multiplying each subscript in the empirical formula by the scaling factor of 5. Therefore, the molecular formula of the compound is C5H10O5.
Learn more about Scaling Factor here:https://brainly.com/question/33786301
#SPJ12
Copper was the first metal to be produced from its ore because it is the easiest to smelt, that is, to refine by heating in the presence of carbon. The ore was likely malachite (Cu2(OH)2CO3). What is the mass percent of copper in malachite?
Answer:
57.5%
Explanation:
The mass percent of copper in malachite (Cu2(OH)2CO3) can be determined as follow:
Molar Mass of malachite (Cu2(OH)2CO3) = (2x63.5) + 2(16 +1) + 12 + (16x3) = 127 + 2(17) + 12 + 48 = 127 + 34 + 12 + 48 = 221g/mol
Mass of Cu in Cu2(OH)2CO3 = 2 x 63.5 = 127g
The percentage by mass of Cu in Cu2(OH)2CO3 is given by:
Mass of Cu/Molar Mass of Cu2(OH)2CO3 x 100
=> 127/221 x 100
=> 57.5%
Therefore, 57.5% by mass of Cu is contained in malachite Cu2(OH)2CO3
Wavelength (nm)n2E (J) 404.7 435.8 546.1 579.0 Show your work (or send in a separate sheet with your work on it): Q1: A sodium vapor lamp is similar to a mercury vapor lamp. Sodium displays a single visible emission line at 589.3 nm. Why is it better to use a mercury vapor lamp for calibration purposes
Answer: Please see answer below
Explanation:
Mecury vapor lamp is better to use than Sodium vapor light, this is because because
---The Filaments of the lamp in sodium emit fast moving electrons, which causes valence electrons of the sodium atoms to excite to higher energy levels which when electrons after being excited, relax by emitting yellow light which concentrates on the the monochromatic bright yellow part of the visible spectrum which is about 580-590 or about (589nm) which will fall incident on the calibrations making it difficult to see
While
In Mercury vapor lamp, The emitted electrons from the filaments, after having been excited by high voltage, hit the mercury atoms but the excited electrons of mercury atoms relax and emits an ultraviolet uv invisible lights falling on the mecury vapour lamp to produce white light covering a wide range of (380-780 nm) which is visible that is why it is used for calibrations purposes in lightening applications.
Calculate the final concentration of ONPG (in mM) if you add 1.42 mL of 3.3 mM ONPG and dilute to a final volume of 10 mL with PBS buffer. Report your final answer to two places after the decimal.
Answer : The final concentration of ONGP is, 0.47 mM
Explanation :
Formula used :
[tex]M_1V_1=M_2V_2[/tex]
where,
[tex]M_1\text{ and }V_1[/tex] are the initial molarity and volume
[tex]M_2\text{ and }V_2[/tex] are the final molarity and volume
We are given:
[tex]M_1=3.3mM\\V_1=1.42mL\\M_2=?\\V_2=10mL[/tex]
Now put all the given values in above equation, we get:
[tex]3.3mM\times 1.42mL=M_2\times 10mL\\\\M_2=0.47mM[/tex]
Hence, the final concentration of ONGP is, 0.47 mM
You are given mixture made of 290 grams of water and 14.2 grams of salt. Determine the % by mass of salt in the salt solution.
Answer:
Solution is 4.67% by mass of salt
Explanation:
% by mass is the concentration that defines the mass of solute in 100g of solution.
In this case we have to find out the mass of solution with the data given:
Mass of solution = Mass of solute + Mass of solvent
Solute: Salt → 14.2 g
Solvent: Water → 290 g
Solution's mass = 14.2 g + 290g = 304.2 g
% by mass = (mass of solute / mass of solution) . 100
(14.2 g / 304.2g) . 100 = 4.67 %
when the iron(III) oxide reacts with hydrochloric acid, iron (III) chloride and water are formed. How many gras of iron (III) chloride are formed from 10.0g of iron (III) oxide
Answer:
10.1 g of FeCl₃ are formed by the reaction
Explanation:
First step is to determine the reaction where the reactants are Fe₂O₃ and HCl in order to produce FeCl₃ and H₂O.
Equation is: Fe₂O₃ + 6HCl → 2FeCl₃ + 3H₂O
We assume the acid is in excess, so the limiting reagent will be the oxide.
Let's work with mass:
1 mol of Fe₂O₃ is 159.7 g
2 mol of FeCl₃ is 162.2 g
So now we propose a rule of three:
159.7 g of oxide can produce 162.2 grams of chloride
Then, 10 g of oxide will produce (10 . 162.2) / 159.7 = 10.1 g of FeCl₃
Answer:
20.3 grams of FeCl3 will be formed
Explanation:
Step 1: Data given
iron(III) oxide = Fe2O3
hydrochloric acid = HCl
iron (III) chloride = FeCl3
water = H2O
Mass of Fe2O3 = 10.0 grams
Molar mass Fe2O3 = 159.69 g/mol
Step 2: The balanced equation
Fe2O3 +6HCl → 2FeCl3 + 3H2O
Step 3: Calculate moles Fe2O3
Moles Fe2O3 = mass Fe2O3 / molar mass Fe2O3
Moles Fe2O3 = 10.0 grams/ 159.69 g/mol
Moles Fe2O3 = 0.0626 moles
Step 4: Calculate moles of FeCl3
For 1 mol Fe2O3 we need 6 moles HCl to produce 2 moles FeCl3 and 3 moles H2O
For 0.0626 moles Fe2O3 we'll have 2*0.0626 = 0.1252 moles FeCl3
Step 5: Calculate mass FeCl3
Mass FeCl3 = moles FeCl3 * molar mass FeCl3
Mass FeCl3 = 0.1252 moles * 162.2 g/mol
Mass FeCl3 = 20.3 grams
20.3 grams of FeCl3 will be formed
The price of gold on April 15,2000 was $282/t.oz. How much did 100.0cm^3 of gold cost that day if 1.00 t.oz=28.4 grams?
Answer:
price ($) Au = $ 19183.94
Explanation:
april 15,2000:
∴ price Au = $ 282/t.oz
∴ 1.00 t.oz = 28.4 g
∴ V Au = 100.0 cm³ ⇒ price ($) = ?
∴ δ Au = 19.32 g/cm³
⇒ mass Au = (100.0 cm³)*(19.32 g/cm³)
⇒ m Au = 1932 g
⇒ price ($) = (1932 g Au)*(1.00 t.oz/28.4 g Au)*( $ 282/t.oz)
⇒ price ($) = $ 19183.94
To calculate the cost of 100.0cm3 of gold on April 15, 2000, convert the volume to grams, then to troy ounces, and multiply by the price per troy ounce.
Explanation:To calculate the cost of 100.0cm3 of gold on April 15, 2000, we need to convert the volume of gold to grams and then to troy ounces. First, convert 100.0cm3 to grams by multiplying it by the density of gold (19.3 g/cm3). This gives us 1930 grams. Next, convert grams to troy ounces by dividing by the conversion factor of 28.4 grams per troy ounce. This gives us approximately 67.96 troy ounces. Finally, multiply the number of troy ounces by the price per troy ounce to find the cost. Therefore, 100.0cm3 of gold on April 15, 2000 would have cost $19,191.12.
Learn more about Calculating the cost of gold here:https://brainly.com/question/31784557
#SPJ11
Magnesium metal reacts with gaseous oxygen in a combination reaction. Write a balanced equation to describe this reaction. Include states of matter in your answer. Click in the answer box to open the symbol palette.
Answer: 2Mg (s) + O2 (g) ----> 2MgO (s)
Explanation:
Lets write the equation of the reaction.
Mg(s) + O2 (g) ----> MgO (s)
Counting the number of atoms for each element we have:
Left hand side: Mg =1 O = 2
Right hand side : Mg = 1, O =2
To balance this equation input "2" as coefficient for "MgO" on the right hand side and "2", as coefficient for "Mg" on the left hand side of the equation. Hence our balanced equation will be
2Mg (s) + O2 (g) -----> 2MgO (s)
Final answer:
The balanced chemical equation for the combination reaction between magnesium metal and gaseous oxygen to form magnesium oxide is: 2Mg (s) + O₂(g) → 2MgO (s). This reaction follows the conservation of mass.
Explanation:
The reaction between magnesium metal and gaseous oxygen is a combination reaction in which magnesium is oxidized. When magnesium (Mg) combines with oxygen (O₂), it forms magnesium oxide (MgO). The equation representing this exothermic reaction is written as:
2Mg (s) + O₂(g) → 2MgO (s)
This reaction adheres to the law of conservation of mass, meaning the total mass of the reactants equals the total mass of the products. During the reaction, magnesium atoms lose electrons (are oxidized) and the oxygen molecule gains electrons.
Drag each title to the correct location identify each process as carbon source or carbon sink
Answer:
PLATO Answer
Explanation:
Underneath Photosynthesis Is Carbon Sink
Underneath Animals Is Carbon Sink
Underneath Combustion Is Carbon Source
Among the given options, only the title 'a' correctly identifies the processes as carbon sources and sinks. Burning fossil fuels is a carbon source, while oceans are a carbon sink. The other titles misinterpret the roles of various processes in the carbon cycle.
Explanation:The correct title to location identifications for each process as carbon source or sink are as follows:
a. Carbon sources, such as burning fossil fuels, produce carbon while carbon sinks, such as oceans, absorb carbon.b. Incorrect, as carbon sources like volcanic activity produce carbon, they don't absorb it. And carbon sinks such as vegetation absorb carbon, they don't produce it.c. Incorrect, as carbon sources like vegetation produce carbon, they do not absorb it. Carbon sinks, like volcanic activity, in reality, does not absorb carbon, they produce it.d. Incorrect, because carbon sources (for example, volcanic activity) produce carbon and don't absorb it, and carbon sinks (for example, burning fossil fuels) actually absorb carbon, rather than producing it.Learn more about Carbon Cycle here:https://brainly.com/question/2076640
#SPJ2
The 1H NMR spectrum of an unknown acid has the following peaks: δ (ppm) = 12.71 (1H, s), 8.04 (2H, d), 7.30 (2H, d), 2.41 (3H, s) Which structure best fits this spectral information?
Answer:
The most appropriate structure given the sparse spectral data is 4-acetyl benzoic acid (see attached).
Explanation:
It is difficult to accurately elucidate the structure of this compound without its chemical formula. But from the 1H NMR spectral data shows a total of 8 hydrogen atoms:
12.71 (1H. s) - confirms presence of carboxylic acid proton, C=O-OH8.04 (2H, d) - confirms aromatic hydrogen7.30 (2H, d) - confirms aromatic hydrogen2.41 (3H,s) - confirms C=C hydrogen or ketone O=C-RCH3The attached files show the structure and the neighboring hydrogen atoms.
The most likely structure i 4-acetyl benzoic acid
At 330 K the vapor pressure of pure n-pentane is 1.92 atm and the vapor pressure of pure n-octane is 0.07 atm. If 330K is the normal boiling point for a solution of these two substances, what will the mole fractions of each substance be in that solution
Answer: mole fractions are
For n-pentane = 0.965
For n-octane = 0.035
Explanation: pressure exerted by each gas is,
n-pentane = 1.92atm
n-octane = 0.07atm
Total pressure exerted = 1.92 + 0.07
= 1.99atm.
Recall that the partial pressure exerted by each gas is the product of its mole fraction and the total pressure, that is,
Pres. n-pentane = n x pressure(total)
1.92 = n x 1.99
n = 1.92/1.99 = 0.965 for n-pentane
For n-octane,
n = 1 - 0.965 = 0.035 for n-octane.
Time and concentration data were collected for the reaction A ⟶ products A⟶products t (s) [A] (M) 0 0.52 0.52 20 0.43 0.43 40 0.35 0.35 60 0.29 0.29 80 0.23 0.23 100 0.19 0.19 The blue curve is the plot of the data. The straight orange line is tangent to the blue curve at t = 40 s. t=40 s. Approximate the instantaneous rate of this reaction at time t = 40 s.
Answer:
instantaneous rate at 40 s= 0.0035 M /s.
Explanation:
Instantaneous rate at 40 s is the slope of the line (tangent to the curve)
= Δp/Δt
From, the straight orange line
ΔP = (0.48 - 0.16) M.
Δt = (92 -0) s
Now, instantaneous rate at 40 s
= 0.48 - 0.16/92 - 0
instantaneous rate at 40 s= 0.0035 M /s.
Answer:
0.0035
Explanation:
check the picture
Suppose the surface-catalyzed hydrogenation reaction of an unsaturated hydrocarbon has a rate constant of 0.725 M/min. The reaction is observed to follow zero-order kinetics. If the initial concentration of the hydrocarbon is 5.90 M, what is the half-life of the reaction in seconds? *Please report 3 significant figures. Numbers only, no unit. No scientific notation.
Answer : The half-life of the reaction in seconds is, 244
Explanation :
The expression used for zero order reaction is:
[tex]t_{1/2}=\frac{[A_o]}{2k}[/tex]
where,
[tex]t_{1/2}[/tex] = half-life of the reaction = ?
[tex][A_o][/tex] = initial concentration = 5.90 M
k = rate constant = 0.725 M/min
Now put all the given values in the above formula, we get:
[tex]t_{1/2}=\frac{5.90}{2\times 0.725}[/tex]
[tex]t_{1/2}=4.069min=244.14s\approx 244s[/tex]
conversion used : (1 min = 60 s)
Thus, the half-life of the reaction in seconds is, 244
Which of the following is/are a true statement about 1 mole samples of oxygen,
hydrogen, and nitrogen gas at STP?
I. Only oxygen and hydrogen are diatomic molecules.
II. All 3 samples occupy the same volume.
III. All 3 samples have the same mass.
A) I only
B) II only
C) I and II only
D) II and III only
E) I, II and III
What is the heat energy released?
Estimate the heat energy released when one mole of the of the fuel molecule acetylene C2H2 undergoes complete combustion with oxygen to form carbon dioxide and water.
When of alanine are dissolved in of a certain mystery liquid , the freezing point of the solution is lower than the freezing point of pure . On the other hand, when of potassium bromide are dissolved in the same mass of , the freezing point of the solution is lower than the freezing point of pure . Calculate the van't Hoff factor for potassium bromide in . Be sure your answer has a unit symbol, if necessary, and is rounded to the correct number of significant digits.
Answer:
The factor is 2
Explanation:
Van't Hoff factor is defined as the ratio between the species of a solute before the addition to the solvent and particles produced when the substance is dissolved. It is used, principally, in colligative properties.
Before solution, potassium bromide, KBr, has just one specie, that is, KBr. When KBr is dissolved (As a salt):
KBr(aq) → K⁺(aq) + Br⁻(aq)
There are produced two species, K⁺ and Br⁻. By definition of Van't Hoff factor, for this salt, the factor is 2.
What is the molarity of a solution containing 56 grams of solute in 959 mL of solution? (molar mass of solute is 26 g/mol)
Answer:
Molarity = 2.25M
Explanation:
n= m/M= 56/26=2.15mol, V= 959ml= 0.959L
n=C×V
2.15= C× 0.959
Simplify
C= 2.25M
Answer:
2.2M
Explanation:
The rovibrational transition of 1H 35Cl with v = 0 to 1, J = 11 to 10 occurs at 2757.89 cm-1 , and the transition with v = 0 to 1, J = 10 to 9 occurs at 2779.07 cm-1 . From this information, i) calculate the spring constant of the vibrational potential (assuming the harmonic approximation and rigid rotor approximation) and ii) the equilibrium length of the HCl bond.
Answer:
Explanation:
find the solution below
Thermal decomposition of 5.0 metric tons of limestone to lime and carbon dioxide requires 9.0 x 106 kJ of heat. Convert this energy to joules A. 9.0 x 108 J B. 9.0 x 104 J C. 9.0 x 103 J D. 9.0 x 109 J E. None of these is within 5% of the correct answer
Answer : The correct option is, (D) [tex]9.0\times 10^9J[/tex]
Explanation :
As we are given that the energy require for decomposition is, [tex]9.0\times 10^6kJ[/tex].
Now we have to calculate the energy in joules.
Conversion used :
1 kJ = 1000 J
As, 1 kJ of energy = 1000 J
So, [tex]9.0\times 10^6kJ[/tex] of energy = [tex]\frac{9.0\times 10^6kJ}{1kJ}\times 1000J[/tex]
= [tex]9.0\times 10^9J[/tex]
Therefore, the energy in joules is, [tex]9.0\times 10^9J[/tex]
Thermal decomposition of 5.0 metric tons of limestone to lime and carbon dioxide requires 9.0 × 10⁹ Joules of heat.
What is energy?Enegy is the quantitative property which is used by any system to perform any work.
Chemical reactions generally involves energy in the form of heat energy and given amount of energy is 9.0 × 10⁶ kJ.
We know that:
1 kJ = 1000 J
So, 9.0 × 10⁶ kJ = 9.0 × 10⁶ kJ × 1000
9.0 × 10⁶ kJ = 9.0 × 10⁹ J
Hence, option (D) is correct i.e. 9.0 × 10⁹ J.
To know more about heat energy, visit the below link:
https://brainly.com/question/19666326
Consider the volumes of benzaldehyde and acetone that you used for your scaled-down version of the lab (as described on the Aldol Condensation page and in the Aldol Lab quiz), and consider how these reactants are added to the reaction mixture. There is a potential problem associated with the preparation and addition of the benzaldehyde/acetone mixture, which would be exacerbated by the scaling down of the reaction. What is this problem, and why would this become a bigger problem at smaller scale
Answer:
Aldol condensation is possible only when their is alpha Hydrogen atom is present. It ia present only in the acetophenone and not in benzaldehyde.
Explanation:
How many mL of 0.50 M NaOH solution are required to completely titrate 15.0 mL of 0.20 M HNO3 solution?
Answer:6.0 ML
Explanation:
A tank at is filled with of dinitrogen difluoride gas and of carbon dioxide gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas, and the total pressure in the tank. Be sure your answers have the correct number of significant digits. dinitrogen difluoride molar fraction: partial pressure: carbon dioxide mole fraction: partial pressure: Total pressure in tank:
Answer:
For N₂F₂:
Molar fraction = 0.84
Partial pressure = 1.12 atm
For SF₄:
Molar fraction = 0.16
Partial pressure = 0.208 atm
Explanation:
It seems your question is missing the values required to solve the problem. However, an internet search showed me the following values for your question. If the values in your problem are different, your answer will be different as well, however the solving method will remain the same:
" A 5.00L tank at 0.7°C is filled with 16.5g of dinitrogen difluoride gas and 5.00g of sulfur tetrafluoride gas. You can assume both gases behave as ideal gases under these conditions. "
First we calculate the moles of each gas, using their molar mass:
16.5 g N₂F₂ ÷ 66 g/mol = 0.25 mol N₂F₂5.00 g SF₄ ÷ 108 g/mol = 0.0463 mol SF₄Total mol number = 0.25 + 0.0463 = 0.2963 mol
Mole Fraction N₂F₂ = 0.25/0.2963 = 0.84Mole Fraction SF₄ = 0.0463/0.2963 = 0.16Now we use PV=nRT to calculate the partial pressure of each gas:
P = ?
V = 5.00 L
T = 0.7 °C ⇒ 0.7 + 273.16 = 273.86 K
For N₂F₂:
P * 5.00 L = 0.25 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 273.86 KP = 1.12 atmFor SF₄:
P * 5.00 L = 0.0463 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 273.86 KP = 0.208 atm
Final answer:
To calculate the mole fraction, you divide the number of moles of a gas by the sum of the moles of all gases in the mixture. The partial pressure of a gas is the pressure that the gas would exert if it were alone in the container. The total pressure in the tank is the sum of the partial pressures of each gas.
Explanation:
The mole fraction of a gas is the ratio of the moles of that gas to the total moles of all gases in the mixture. To calculate the mole fraction of dinitrogen difluoride (N2F2), divide the moles of N2F2 by the sum of the moles of N2F2 and CO2:
Mole fraction of N2F2 = moles of N2F2 / (moles of N2F2 + moles of CO2)
To calculate the mole fraction of carbon dioxide (CO2), divide the moles of CO2 by the sum of the moles of N2F2 and CO2:
Mole fraction of CO2 = moles of CO2 / (moles of N2F2 + moles of CO2)
The partial pressure of a gas is the pressure that the gas would exert if it were alone in the container. To calculate the partial pressure of N2F2, multiply its mole fraction by the total pressure in the tank:
Partial pressure of N2F2 = mole fraction of N2F2 * total pressure
To calculate the partial pressure of CO2, multiply its mole fraction by the total pressure in the tank:
Partial pressure of CO2 = mole fraction of CO2 * total pressure
The total pressure in the tank is the sum of the partial pressures of N2F2 and CO2:
Total pressure = partial pressure of N2F2 + partial pressure of CO2
Problem PageQuestion Suppose an iron atom in the oxidation state formed a complex with three hydroxide anions and three water molecules. Write the chemical formula of this complex.
The Question is incomplete here is the complete question " Suppose an iron atom in the oxidation state +3 formed a complex with three hydroxide anions and three water molecules. Write the chemical formula of this complex.
Answer:
{Fe(OH)3(H20)3}
Explanation:
Oxidation state is the electron gained or lost by and atom, So if iron is in +3 state in formula it must have lost three electron.
We know that OH posses the oxidation state of -1 and water have zero oxidation state. SO, Let's take iron equal to y and find its oxidation state in the formula
y + 3 ( - 1 ) + 3 ( 0 ) = 0
y - 3 + 0 = 0
y-3=0
y= + 3
Hence it's proved that iron has +3 oxygen state.