Answer:
a. 7.38 N b. 40.87 N c. 0.113 kg-m²
Explanation:
The following 1h nmr absorptions were obtained on a spectrometer operating at 200 mhz and are given in hz downfield from tms. Convert the absorptions to δ units.
Answer:
Explanation:
We will use the formula below:
Chemical shift in ppm = peak position in Hz (relative to TMS) /
spectrometer frequency in MHz.
a) 956Hz/200Hz= 4.78 ppm
b) (2.40E3)/200Hz= 12 ppm
c) (1.97E3)/200Hz = 9.85 ppm
Final answer:
In NMR spectroscopy, absorptions are converted to δ units using the formula δ = (absorption in Hz) / spectrometer frequency in MHz. This conversion helps standardize chemical shift values across different spectrometer frequencies.
Explanation:
Absorptions in NMR spectroscopy are typically reported in parts per million (ppm) downfield from TMS. To convert these absorptions to δ units, you can use the formula: δ = (absorption in Hz) / spectrometer frequency in MHz. For example, if an absorption is 280 Hz on a 70 MHz spectrometer, the chemical shift in ppm would be 4 ppm.
Putting a marshmallow directly in the fire
A. Conduction
B. Convention
C. Radiation
Answer:
A conduction is the answer
Explanation:
Answer: Radiation
Explanation:
Conduction involves thermal energy between a conductor/insulator, convection is when warm fluids rise and cool fluids sink due to a distinction in the density of their particles. None of these match a marshmallow over fire. Radiation is the correct answer.
A thin film of alcohol (n = 1.36) lies on a flat glass plate (n = 1.51). When monochromatic light, whose wavelength λ can be changed, is incident normally, the reflected light is minimum for wavelength λ = 512 nm and a maximum for wavelength = 640 nm. What is the minimum thickness of the film?
To find the minimum thickness of the film, one should understand thin film interference. For minimum reflection, this corresponds to the condition of destructive interference. Using this knowledge, the minimum thickness can be calculated using the provided values.
Explanation:One needs to understand thin film interference to solve this problem. This concept involves understanding how light waves interact when they hit a thin film, and this interaction depends on the film's thickness, the light's wavelength, and the medium's indices of refraction.
Given that minimum reflection is obtained for a wavelength of 512 nm, we know that this condition corresponds to destructive interference. For destructive interference in a thin film like the one we're discussing, the additional distance traveled by the second ray of the light (which reflects off the lower surface of the film) must be odd multiples of λ/2, where λ is the wavelength of the light in the medium of the film.
In this case, we know that the film is made of alcohol and the light in this medium has a different wavelength than in vacuum, given by λ' = λ/n. Here, n is the refractive index of alcohol, so λ' = 512 nm/1.36.
For minimum thickness, and therefore first-order destructive interference, we have that 2t = λ'/2, or t = λ'/4, where t is the thickness of the film, the thing we're looking to find. Substituting in our value for λ', we can calculate that the minimum thickness of the film would be 512 nm/(1.36 x 4).
Learn more about thin film interference here:https://brainly.com/question/33710977
#SPJ11
The minimum thickness of the film is approximately 470.6 nm.
To find the minimum thickness of the film, we need to consider the conditions for constructive and destructive interference for normally incident light on a thin film.
For destructive interference (minimum reflected light), the optical path difference between the reflected rays from the top and bottom surfaces of the film must be an odd multiple of half the wavelength of the light in the medium of the film. This can be expressed as:
[tex]2n_f_t = (2m + 1)\frac{\lambda_d}{2}[/tex]
where [tex]\( n_f \)[/tex] is the refractive index of the film, (t) is the thickness of the film, [tex]\( \lambda_d \)[/tex] is the wavelength of the light in air for which destructive interference occurs, and (m) is an integer.
For constructive interference (maximum reflected light), the optical path difference must be an even multiple of half the wavelength of the light in the medium of the film. This can be expressed as:
[tex]2n_f_t = m\lambda_c[/tex]
where [tex]\( \lambda_c \)[/tex] is the wavelength of the light in air for which constructive interference occurs.
Given that the destructive interference occurs at [tex]\( \lambda_d = 512 \)[/tex] nm and the constructive interference occurs at [tex]\( \lambda_c = 640 \)[/tex] nm, we can set up two equations using the above conditions:
For destructive interference:
[tex]2 \times 1.36 \times t = (2m + 1)\frac{512}{2}[/tex]
For constructive interference:
2 x 1.36 x t = m x 640
We can solve these two equations simultaneously to find the minimum thickness (t). Let's first express (m) in terms of (t) from both equations:
From destructive interference:
2 x 1.36 x t = (2m + 1) x 256
[tex]t = \frac{(2m + 1) \times 256}{2 \times 1.36}[/tex]
From constructive interference:
2 x 1.36 x t = m x 640
[tex]t = \frac{m \times 640}{2 \times 1.36}[/tex]
Since the thickness (t) must be the same for both conditions, we can equate the two expressions for (t):
[tex]\frac{(2m + 1) \times 256}{2 \times 1.36} = \frac{m \times 640}{2 \times 1.36}[/tex]
2m + 1 x 256 = m x 640
512m + 256 = 640m
256 = 640m - 512m
256 = 128m
m = 2
Now that we have the value of (m), we can substitute it back into either equation to find (t). Using the destructive interference equation:
[tex]t = \frac{(2 \times 2 + 1) \times 256}{2 \times 1.36}[/tex]
[tex]t = \frac{5 \times 256}{2.72}[/tex]
[tex]t = \frac{1280}{2.72}[/tex]
t = 470.6 nm
When laser light shines on a screen after passing through two closely spaced slits, it becomes
Answer:
diffracted into semicircular waves. constructive interference occurs where the waves are crest to crest or trough to trough, destructive interference occurs where they are crest to trough. The light that falls on the screen produces bands of light and dark fringes on the screen as a result of these constructive and destructive interferences. This is called the young's slit experiment.
Laser light passing through two closely spaced slits and shining on a screen will produce an interference pattern of bright and dark fringes due to the wave properties of light, specifically diffraction and interference, which is illustrated through Young's double-slit experiment.
Explanation:When a laser light passes through two closely spaced slits and shines on a screen, it creates an interference pattern known as interference fringes. This phenomenon occurs due to the wave property of light known as diffraction and interference. Light waves passing through the two slits interfere with each other, creating a series of bright and dark lines or fringes on the screen.
The bright lines, called constructive interference, happen when the light waves enhance each other, and the dark lines, called destructive interference, occur when the light waves cancel each other out. The spacing and number of these fringes depend on the wavelength of the laser light and the distance between the slits. This is illustrated through Young's double-slit experiment.
Learn more about Interference Pattern here:https://brainly.com/question/33930819
#SPJ3
10 points
True or False? Charging by friction happens when you rub two objects
together and PROTONS move from one object to the other.
Answer:
true
Explanation:
yes because I said so
The highest waterfall in the world is the Salto Angel in Venezuela. Its longest single falls has a height of 807 m. If water at the top of the falls is at 14.2°C, what is the maximum temperature of the water at the bottom of the falls? Assume all the kinetic energy of the water as it reaches the bottom goes into raising its temperature.
Answer:
Maximum temperature of the water at the bottom of the fall, θ₂ = 16.09°C
Explanation:
The height of the waterfall, H = 807 m
At the top of the fall, [tex]\theta_{1} = 14.2^{0} C[/tex]
For water, the specific heat capacity, C = 4200 J/kg/°C
Potential energy at the top of the waterfall, PE = mgH
According to the principle of conservation of energy,
Kinetic energy at the bottom of the waterfall = Potential energy at the top
Therefore, KE = mgh
Applying the conservation of energy again,
KE at the bottom = Heat Energy due to raise in temperature
Heat energy due to raise in temperature = MCΔθ
MCΔθ = MgH
CΔθ = gH
Δθ = gH/C
Δθ = (9.81*807)/4200
Δθ = 1.89°C
[tex]\triangle \theta = \theta_{2} - \theta_{1}[/tex]
1.89 = θ₂ - 14.2
θ₂ = 14.2 + 1.89
θ₂ = 16.09°C
Which one of the following is NOT among the characteristics of light gauge steel frames? A. Thermally inferior in itself. B. Susceptible to decay and termites. C. Dimensional stability unaffected by humidity. D. Noncombustible, enabling its use in higher construction types and larger buildings.
Answer:
C. Dimensional stability unaffected by humidity
Explanation:
very wide range of lightweight structural sections are produced by cold forming thin gauge strip material to specific section profiles. These are often termed light gauge or cold formed steel sections. In most cases, galvanized steel strip material is used.
Light gauge steel structures have many of the advantages of light wood framed structures: They are light, and allow quick building without heavy tools or equipment. Every component can easily be carried by hand - a house is like a carpentry job on a larger scale.
Light framed structures allow the passage of sound more readily than the more solid masonry construction.
Light gauge steel will lose strength in the advent of fire. Adequate fire protection must be used.
Light gauge steel structures are non-combustible, which is a code requirement for some types of structures.
What does the left y-axis show?
a- sea surface temperature anomaly, in degrees celsius
b- sea surface temperature anomaly, in degrees fahrenheit
c- time, in four-year intervals
d- incidence of cholera, as a percentage of the normal rate
e- sea surface temperature, in degrees celsius
Answer:
The correct option is;
a- sea surface temperature anomaly, in degrees Celsius
Explanation:
From the diagram related to the question we have two graphs super imposed of Sea surface temperature anomaly, in degrees Celsius and cholera incidence anomaly (%) both plotted against time in years.
On the left the y-axis represents the sea surface temperature anomaly while on the right, the y-axis represents the cholera incidence anomaly (%).
The display of the graph shows the sea surface temperature anomaly in blue.
The left y-axis of a graph generally represents the dependent variable or the outcome of the specific subject being explored. The correct answer to the question would depend on what the graph is representing. Without additional context, it's difficult to determine which option would be correct.
Explanation:The left y-axis on a graph traditionally represents the dependent variables; the outcome of the subject being studied. The answer depends on what the graph is about. If it is about sea surface temperature anomaly, then either option a (in degrees celsius) or option b (in degrees fahrenheit) would be shown on the left y-axis, depending on the measure used in the investigation. If it is about the regular progression of time with respect to the incidence of cholera or temperature, then option c would be displayed on the y-axis. If it is about the incidence of cholera as a percentage of normal rate, then option d would be shown. If it's about sea surface temperature generally, then option e might be displayed on the y-axis. Without context, it's difficult to say which option is correct.
Learn more about Graph Interpretation here:https://brainly.com/question/28418462
#SPJ6
A 7450 kg rocket blasts off vertically from the launch pad with a constant upward acceleration of 2.25 m/s2 and feels no appreciable air resistance. When it has reached a height of 500 m , its engines suddenly fail so that the only force acting on it is now gravity.a) What is the maximum height this rocket will reach above the launch pad?b) How much time after engine failure will elapse before the rocket comes crashing down to the launch pad?
Answer:
a) 112.5 m
b) 15.81s
Explanation:
a)We can use the following equation of motion to calculate the velocity v of the rocket at s = 500 m at a constant acceleration of a = 2.25 m/s2
[tex]v^2 = 2as[/tex]
[tex]v^2 = 2*2.25*500 = 2250[/tex]
[tex]v = \sqrt{2250} = 47.4 m/s[/tex]
After the engine failure, the rocket is subjected to a constant deceleration of g = -10 m/s2 until it reaches its maximum height where speed is 0. Again if we use the same equation of motion we can calculate the vertical distance h traveled by the rocket after engine failure
[tex]0^2 - v^2 = 2gh[/tex]
[tex]-2250 = 2(-10)h[/tex]
[tex]h = 2250/20 = 112.5 m[/tex]
So the maximum height that the rocket could reach is 112.5 + 500 = 612.5 m
b) Using ground as base 0 reference, we have the following equation of motion in term of time when the rocket loses its engine:
[tex]s + vt + gt^2/2 = 0[/tex]
[tex]500 + 47.4t - 10t^2/2 = 0[/tex]
[tex]5t^2 - 47.4t - 500 = 0[/tex]
[tex]t= \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}[/tex]
[tex]t= \frac{47.4\pm \sqrt{(-47.4)^2 - 4*(5)*(-500)}}{2*(5)}[/tex]
[tex]t= \frac{47.4\pm110.67}{10}[/tex]
t = 15.81 or t = -6.33
Since t can only be positive we will pick t = 15.81s
Answer:
A) the maximum height this rocket will reach above the launch pad is 614.68 m
B) time elapsed after engine failure before the rocket comes crashing down to the launch pad is 16.025 sec.
Explanation:
Detailed explanation and calculation is shown in the image below
The total momentum of two marbles before a collision is .06 kg·m/s. No outside forces act on the marbles. What is the total momentum of the marbles after the collision?
Answer:
0.06kgm/s
Explanation:
According to law of conservation of momentum, the sum of momentum of bodies before collision is equal to the momentum of the bodies after collision.
If the total momentum of two marbles before collision is 0.06kgm/s and no outside marbles acts on them, then the momentum of the bodies after collision will also be 0.06kgm/s. This type of collision is elastic i.e both momentum and energy are conserved since no external force acts on them.
Ablock is released from rest al height d= 40 cm and slides down a frictionless ramp and onto a first plateau, which has length d and where the coefficient of kinetic friction is 0.50. If the block is still moving, it then slides down a second frictionless ramp through height d/2 and __________.
Here is the complete part of the question
A block is released from rest at height d= 40 cm and slides down a frictionless ramp and onto a first plateau, which has length d and where the coefficient of kinetic friction is 0.50. If the block is still moving, it then slides down a second frictionless ramp through height d/2 and onto a lower plateau, which has length d/2 and where the coefficient of kinetic friction is again 0.50. If the block is still moving, it then slides up a frictionless ramp until it (momentarily) stops. Where does the block stop?
Answer:
0.3 m
Explanation:
Given that :
the height h = 40 cm = 0.40 m
Coefficient of kinetic friction is [tex]\mu[/tex] =0.50
Using the Law of conservation of energy = [tex]\frac{1}{2} m \mu_1^2 = mgd[/tex]
As the blocks slides down a frictionless ramp and onto a first rough plateau region.So kinetic energy is decreased to :
[tex]\frac{1}{2}mu^2_2 = mgd - \mu_2_k mgd \\ \\ u^2_2 = 2gd - 2 \mu_kgd[/tex]
If the block is still moving, it then slides down a second frictionless ramp through an height h = d/2
Then , we can say that the gained kinetic energy is :
[tex]\frac{1}{2} mu_2^2 = mg (\frac{d}{2})+\frac{1}{2}mu_2^2 \\ \\ \frac{1}{2} mu_2^2 = mg (\frac{d}{2})+ mgd - \mu_k mgd \\ \\ \frac{1}{2} mu_2^2 = 2g(\frac{d}{2})+2gd - 2 \mu_k gd[/tex]
Futhermore , it moves on the horizontal surface where the coefficient of friction causes some of the kinetic energy to disappear
So, the final value of kinetic energy at the end just before climbing is :
[tex]\frac{1}{2}mv^2 = \frac{1}{2}m \mu_2 ^2 - \mu_k mg (\frac{d}{2}) \\ \\ \frac{1}{2}mv^2 = mg \frac{d}{2} + mgd - \mu_k mgd - \mu_k mg (\frac{d}{2}) \\ \\ v^2 = gd + 2gd - 2 \mu_kgd -\mu_kgd[/tex]
[tex]= 3gd - 3 \mu_k gd \\ \\ = 3[g- \mu_kg ]d[/tex]
Let represent H to be the height above the lower plateau when it momentarily stops; From the law of conservation of energy :
[tex]\frac{1}{2}mv^2 = mgH \\ \\ \frac{3}{2}[g-\mu_kg]d = gH \\ \\ H = \frac{3}{2}[1-\mu_k]d \\ \\ = \frac{3}{2}[1-(0.50)](0.40 \ m) \\ \\ =0.3 m[/tex]
two vehicles have a head on collision. one vehicle has a mass of 3000 kg and moves at 25 m/s while the second vehicle has a mass of 2500 kg and moves at -15 m/s. if the vehicles stick together after the collision what is the speed of the combined vehicles
Answer:
The speed of the combined vehicles is 6.82m/s
Explanation:
Using the law of conservation of momentum which stayed that the sum of momentum of bodies before collision is equal to their sum of momentum after collision. After collision, both object moves with the same velocity.
Momentum = mass×velocity
Before collision:
Momentum of vehicle or mass 3000kg moving with velocity 25m/s
= 3000×25
= 75000kgm/s
Pa = 75000kgm/s
Momentum of vehicle with mass 2500kg moving with velocity of -15m/s
= 2500×-15
= -37500kgm/s
After collision:
Momentum = (3000+2500)V
Where v is their common velocity
Momentum after collision = 5500V
Based on the law:
75000+(-37500) = 5500V
75000-37500 = 5500V
37500 = 5500V
V = 37500/5500
V = 6.82m/s
The full range of energy in sunlight can best be described as
Answer:
Solar energy or infrared radiation energy
In the electron dot symbol shown, what kind of bond connects the two nitrogen atoms in this molecule?
ionic bond
covalent bond
double covalent bond
triple covalent bond
Answer:
triple covalent bond
Explanation:
A triple covalent bond is formed when three pairs of electrons (six electrons) are shared between the two combining atoms. A triple bond is shown by marking three short lines between the two symbols of the atoms. It requires three more electrons to attain the stable octet.
- Hope this helps! If you need a further explanation please let me know.
Final answer:
A triple covalent bond connects the two nitrogen atoms in this molecule N2.
Explanation:
A triple covalent bond connects the two nitrogen atoms in this molecule. Nitrogen atoms have 5 valence electrons and need to share 3 pairs of electrons to achieve a valence octet. The triple bond between the nitrogen atoms allows them to share 3 pairs of electrons and form a stable diatomic molecule, N2.
A child in an inner tube is bobbing up and down in the ocean and notices that after a wave crest passes, four more crests pass in a time of 42.4 s and the distance between the crests is 47 m.
If possible, determine the following properties for the wave. (If not possible, enter IMPOSSIBLE.)
(a) period s
(b) frequency Hz
(c) wavelength m
(d) speed m/s
(e) amplitude m
Answer:
period = 10.6 sec, frequency = 0.094 Hz, wavelength = 47 m and speed = 4.418 m/s.
Explanation:
Given:
Four more crests pass in a time of 42.4 s and the distance between the crests is 47 m.
We have to determine five terms.
Lets start with one-one basis.
a.
Period = Time taken by a wave to pass though.
⇒ [tex]P = \frac{Total\ time}{No.\ of\ waves}[/tex]
⇒ [tex]P = \frac{42.4}{4}[/tex]
⇒ [tex]P=10.6[/tex] s
b.
Frequency = Reciprocal of time period in Hertz.
⇒ [tex]f=\frac{1}{T}[/tex]
⇒ [tex]f=\frac{1}{10.6}[/tex]
⇒ [tex]f=0.094[/tex] Hertz
c.
Wavelength = Distance between two consecutive trough and crest.
⇒ [tex]\lambda = 47[/tex] m
d.
Speed (v) = Product of frequency and wavelength.
⇒ [tex]v=f\times \lambda[/tex]
⇒ [tex]v=0.094\times 47[/tex]
⇒ [tex]v = 4.418[/tex] ms^-1
e.
Amplitude = The maximum displacement or half the distance from crest to trough.
⇒ Here it can't be determined.
⇒ Impossible.
So,
The period = 10.6 sec, frequency =0.094 Hz, wavelength = 47 m and speed = 4.418 m/s.
Answer:
Period: 10.6 sec
Frequency = 0.094 Hz
Wavelength = 47 m
Speed = 4.418 m/s
Amplitude : Impossible
Explanation:
Which of the following describes wavelength?
A.
the number of waves that pass a point in a given amount of time
B.
the distance between crests of adjacent waves
C.
the distance a wave travels in a given amount of time
D.
the height of a wave
Answer:
B.
Explanation:
The distance between two crests of adjacent waves is called wavelength.
Final answer:
Wavelength is (option B) the distance between consecutive crests of adjacent waves and is parallel to the direction of wave propagation, typically represented by the Greek letter lambda (λ).
Explanation:
The correct description of wavelength in the context of waves is the distance between crests of adjacent waves. Wavelength is the distance between two consecutive points of similar position along the wave such as from one crest to the next crest, or one trough to the next trough. It's important to note that wavelength is parallel to the direction in which the wave is traveling, so it measures the length of one complete cycle of the wave.
Options such as the number of waves passing a point in a given time (frequency) and the wave's height (amplitude) are different wave properties. Thus, the correct answer is option B: the distance between crests of adjacent waves.
A firefighter who weighs 192 lb slides down an infinitely long fire pole that exerts a friction resistive force with magnitude proportional to his speed, with k D 2:5 lb-s/ft. Assuming that he starts from rest, find his velocity as a function of time and find his terminal velocity
Answer:
Explanation:
check the pictures attached to further understand and i hope it works
Answer:
[tex]v = \frac{-384}{5} (1 - \frac{12}{5} e^{ -5t/12})[/tex]
Explanation:
Weight of the firefighter, W = 192 lb
W = mg
g = 32 ft/s²
Mass of the firefighter, m = W/g
m = 192/32
m = 6 slugs
k = 2.5 lb-s/ft
The force, F = ma = kv
2.5v = 6a
a = 2.5v/6
a = 5v/12
The fundamental dynamic equation;
dv/dt + drag + gravity = 0
dv/dt = -g-a
dv/dt = -32-5v/12..............(a)
The motion will attain terminal velocity when dv/dt = 0
-32 - 5v/12 = 0
-32 = 5v/12
-384 = 5v
v₀ = -384/5
v₀ = -384/5
dv/dt = -32 - 5v/12
[tex]\frac{dv}{-32 -5v/12} = dt[/tex]
[tex]-12/5 ln(32 + 5v/12) = t + c\\ln(32 + 5v/12) = -5t/12 + lnc\\ln(32 + 5v/12) - ln c = -5t/12\\ln\frac{32 + 5v/12}{c} = -5t/12[/tex]
Take exponential of both sides
[tex]\frac{32 + 5v/12}{c} =e^{ -5t/12}\\32 + 5v/12 = ce^{ -5t/12}\\5v/12 = -32 + ce^{ -5t/12}\\v = 12/5 (-32 + ce^{ -5t/12})\\[/tex]
c = v₀ = -384/5
[tex]v = 12/5 (-32 - \frac{384}{5} e^{ -5t/12})\\v = \frac{-384}{5} (1 - \frac{12}{5} e^{ -5t/12})[/tex]
How can you measure the wavelength of a longitudinal wave
Answer:
In longitudinal wave, wavelength is obtained by measuring the distance from a compression to the next compression or from a rarefaction to the next rarefaction.
Explanation:
What is a longitudinal wave?
A longitudinal wave is a wave in which the particles of the medium are displaced in a direction parallel to the direction of energy transport
What is a wave length?
wavelength of a wave is basically the length of one complete wave cycle. The wavelength can always be determined by measuring the distance between any two corresponding points on adjacent waves.
Final answer:
To measure the wavelength of a longitudinal wave, identify two consecutive compressions or rarefactions and measure the distance between them. In a classroom setup, produce a standing wave in a medium like a rubber tubing and measure the distance between nodes, then use the speed-frequency-wavelength equation to find the wavelength.
Explanation:
To measure the wavelength of a longitudinal wave, such as a sound wave, we must first understand that the wavelength is the distance between two consecutive compressions or two consecutive rarefactions. In practice, measuring the wavelength of a longitudinal wave can be achieved through various experiments depending on the medium of wave propagation. For waves in a slinky or spring, you can measure the distance between compressions after creating a wave. For sound waves, you may use a tuning fork and a tube with a movable piston to find the point of resonance, which corresponds to a specific wavelength.
In the classroom, a common method to measure the wavelength is to use a wave generator and a medium such as a rubber tubing or a spring. You generate a standing wave and measure the distance between two consecutive nodes (points of no displacement) which corresponds to half a wavelength. By multiplying this distance by two, you get the full wavelength.
To relate wavelength to period and frequency, the fundamental equation v = f × λ (where v is the speed of the wave, f is frequency, and λ is wavelength) can be used. By finding the period (T, the time it takes for a single wavelength to pass a point), and knowing that the frequency is the inverse of the period (f = 1/T), you can determine the wave speed.
Soccer ball is heading east positive direction with momentum of 2kgm/s. It is kicked backwards and a fraction of a second later is moving west negative direction withmomentum of -2.3. What impulse did the kicker put on the ball on kgm/s?
Answer:
-4.3 kgm/s
Explanation:
Impulse which the soccer ball experiences is equal to the change in momentum of a body.
It is given mathematically as:
Impulse = m*Δv = [tex]mv - mu[/tex]
Initial momentum of soccer ball = 2 kgm/s
Final momentum of the soccer ball = -2.3 kgm/s
Therefore, Impulse will be:
Impulse = [tex]-2.3 - 2[/tex]
Impulse = [tex]-4.3 kgm/s[/tex]
The impulse put on the soccer ball by the kicker is -4.3 kgm/s.
Which example illustrates an engineering improvement that has led to greater knowledge about
space?
analyzing rock samples from the moon to determine the composition of the moon
science experiments on the International Space Station that study how crystals grow in
space
development of the space shuttle to allow humans to explore the moon
Answer:
D.
Explanation:
development of the space shuttle to allow humans to explore the moon
A student lifts a 1.5 kg book from a chair seat 41 cm off the ground to a table that is 71 cm off the ground.
What is the book's change in gravitational potential energy?
Answer:
4.4j
Explanation:
The change in gravitational potential energy of the book is 3.57 J.
Explanation:The change in gravitational potential energy of the book can be calculated using the equation:
ΔPE = mgh
where ΔPE is the change in potential energy, m is the mass of the book, g is the acceleration due to gravity (9.8 m/s²), and h is the change in height.
In this case, the mass of the book is 1.5 kg, the initial height is 41 cm (or 0.41 m), and the final height is 71 cm (or 0.71 m).
Substituting these values into the equation:
ΔPE = (1.5 kg)(9.8 m/s²)(0.71 m - 0.41 m) = 3.57 J
Therefore, the book's change in gravitational potential energy is 3.57 J.
A wire runs left to right and carries a current in the direction shown.
A horizontal line representing a wire. There is a vector right labeled I. There is a point labeled Z below the line.
What is the direction of the magnetic field at point Z?
Answer (C)
Explanation:HOPE THIS HELPS
The direction of the magnetic field at point Z is into the page.
What is magnetic field?The magnetic field is the region of space where a charged object experiences magnetic force when it is moving.
When a charged particle such as an electron or proton moves inside a conductor, magnetic lines of force rotate around the particle. Since, this relative motion caused the magnetic field to generate.
A wire runs left to right and carries a current in the direction shown (attached diagram).
A horizontal line representing a wire. There is a vector right labeled I. There is a point labeled Z below the line.
According to the Fleming's right hand rule, the direction of magnetic field is into the page.
Thus, the direction of the magnetic field at point Z is into the page.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ5
In the skeletal system, these structures are responsible for connecting bones.
A.
ligaments and tendons
B.
cartilage and calcium
C.
tendons and muscles
D.
bones and ligaments
Answer:
answer is A
Explanation:
Answer:
A.ligaments and tendons
Explanation:
A cylindrical fishing reel has a mass of 0.7 kg and a radius of 5.24 cm. A friction clutch in the reel exerts a restraining torque of 1.88 N · m if a fish pulls on the line. The fisherman gets a bite, and the reel begins to spin with an angular acceleration of 65.7 rad/s 2 . What force does the fish exert on the line? Answer in units of N.
Final answer:
The force exerted by the fish on the line is 35.87 N.
Explanation:
The force exerted by the fish on the line can be calculated using the equation:
Torque = Moment of Inertia x Angular Acceleration
In this case, the moment of inertia of the fishing reel can be calculated using the formula:
Moment of Inertia = [tex]0.5 x Mass x Radius^2[/tex]
Substituting the given values, we can calculate the moment of inertia and then solve for the force exerted by the fish:
Moment of Inertia =[tex]0.5 x 0.7 kg x (5.24 cm)^2[/tex]
Angular Acceleration = [tex]65.7 rad/s^2[/tex]
Using the equation Torque = Moment of Inertia x Angular Acceleration, we can rearrange the equation to solve for the force:
Torque = Force x Radius
Solving for the force:
Force = Torque / Radius
Substituting the given values, we can calculate the force exerted by the fish:
Force = 1.88 N.m / (5.24 cm)
Converting the radius to meters:
Force = 1.88 N.m / (0.0524 m) = 35.87 N
The force exerted by the fish on the line is calculated using the reel's moment of inertia, angular acceleration, and the restraining torque applied by the clutch. The resulting force is found to be 37.08 N.
To find the force that the fish exerts on the line, we need to consider the torque and angular acceleration.
First, let's find the moment of inertia (I) for the cylindrical reel. The moment of inertia for a cylinder rotating around its central axis is given by:I = 0.5 * m * r²
m = 0.7 kg (mass of the reel)
r = 0.0524 m (radius of the reel, converted from cm to meters)
Therefore:
I = 0.5 * 0.7 kg * (0.0524 m)² = 9.62 * 10⁻⁴ kg·m²
We are given the angular acceleration (α) as:α = 65.7 rad/s²
Using Newton's second law for rotation, we find the net torque (τ_net) on the reel:
τ_net = I * α
τ_net = 9.62 * 10⁻⁴ kg·m² * 65.7 rad/s² = 0.0632 N·m
The friction clutch exerts a restraining torque (τ_friction) of 1.88 N·m. The total torque exerted by the fish includes overcoming this friction:τ_fish = τ_net + τ_friction
τ_fish = 0.0632 N·m + 1.88 N·m = 1.9432 N·m
The force (F) exerted by the fish on the line can be related to the torque using:τ_fish = F * r
Therefore:F = τ_fish / r
F = 1.9432 N·m / 0.0524 m = 37.08 N
Thus, the force exerted by the fish on the line is 37.08 N.
Complete Question: A cylindrical fishing reel has a mass of 0.7 kg and a radius of 5.24 cm. A friction clutch in the reel exerts a restraining torque of 1.88 N · m if a fish pulls on the line. The fisherman gets a bite, and the reel begins to spin with an angular acceleration of 65.7 rad/s 2 . What force does the fish exert on the line? Answer in units of N.
Two objects collide and bounce apart. Assuming no outside forces act on the system, which best describes the total momentum after the collision?
It is always greater than it was before the collision.
It is often greater than it was before the collision.
It is always the same as it was before the collision.
It is often the same as it was before the collision.
Answer:
It is always the same as it was before the collision.
Answer:
The answer is C on Edge
Explanation:
Why was the term inert gas once used to refer to noble gases and why is it no longer in common use?
Answer:
Because unlike inert gas Noble gas sometimes indergo reaction
Explanation:
Inert gas as the name suggest means it can not undergoing reaction at most conditions.But as a science progresses it was found that some group 8 elements under special conditions of temperature and pressure can under go reaction this discovery led to why inert gas is not commonly used
Answer:
Explanation:
Noble gases are gases that belongs to group 18(8A) in the periodic table, they have 8 electrons in their outermost shell. Examples includes helium, neon, argon, krypton and Radon.
These gases were formerly referred to as inert gases meaning they are chemically inactive, this is because they have a complete octet structure which makes them stable, but as time goes on scientist realised that referring to these gases as inert might not be outrightly correct because :
1.Some members of the noble gases form compounds meaning that they are not inert under all conditions, for example Xenon tetrafluoride
2.Radon is a dangerous radioactive element, it unstable to such an extent that its radioactivity makes any chemical reaction with it almost impossible.
3.Gases like Nitrogen are inert under various conditions.
How much mass does the sun lose through nuclear fusion per second?
Answer:
1.10^6 kg of mass per second
Explanation:
All energy lost by the sun comes from nuclear fusion.
Sun loses energy at 2.5*10^{19}J per hour, that is 9*10^{22}J/s
To find the mass lost by the sun in liberation of energy you use the famous Einstein's equation:
[tex]E=mc^2\\\\m=\frac{E}{c^2}=\frac{9*10^{22}}{(3*10^{8}m/s)^2}=1*10^6kg[/tex]
hence, the sun liberates 1.10^6 kg of mass per second
Four beakers of four different sizes are filled with water to the same depth. The temperature of the water is the same in all four beakers. If 100 grams of ice are added to each beaker, in which beaker will the temperature change the least?
Answer: ITS C ''X''
Explanation: Study island
Answer:
X
Explanation:
All the beakers are filled to the same depth. However, beaker X has the largest radius of all the beakers. Thus, beaker X contains a larger volume of water. Since beaker X has more water it will have the least change in temperature given the same amount of ice as the other three beakers.
Which of the following situations would produce an average velocity of zero?
A) a round-trip to school and back
B) a horse galloping in a field
C) the criss-crossing path of a flying bug
D) a trip, first to the moon, then onto Mars
A man travels to a foreign country and smuggles a pair of exotic snakes (one male and one female) back into his country of origin. Fearing that he will be arrested by the police, he releases the snakes into the wild. How will this action most likely affect his local ecosystem? A. There will be a reduction in the native snake population as they compete for resources with the exotic snakes. B. The addition of the exotic snakes will have no effect on the local ecosystem. C. The exotic snakes will become sterile and not be able to reproduce since they are not in their native environment. D. There will be an increase in the number of mice in the local ecosystem in order to provide more food for the snake populations.
Answer:
A. There will be a reduction in the native snake population as they compete for resources with the exotic snakes.
Explanation:
The new snakes will compete with the native snakes for food resources. The available food might not be able to support the growing demand when these new snakes start reproduce. The reduced available food Can lead to a population decrease of the native snakes.