A thermodynamic system undergoes a process in which its internal energy decreases by 1,477 J. If at the same time 678 J of thermal energy is transferred to it, how much work (in J) is done by the system?

Answer:

The magnitude of the resultant is 30.4 N.

The resultant angle direction is 25.3°.

Explanation:

To find the resultant of the magnitude and direction for given forces “P” and “Q” are 20 N and 15 N respectively, the angle (θ) between them is 60°.

We know that from triangle law of forces,  

[tex]R=\sqrt{P^{2}+2 P Q \cos \theta+Q^{2}}[/tex]

Substitute the given values in the above formula,

[tex]R=\sqrt{20^{2}+2 (20)(15) Q \cos 60+15^{2}}[/tex]

[tex]R=\sqrt{400+600(0.5) + 225}[/tex]

[tex]R=\sqrt{400+300 + 225}[/tex]

[tex]R=\sqrt{925}[/tex]

R = 30.4 N

The magnitude of the resultant is 30.4 N.

To find the direction of the resultant we know that [tex]\text {Resultant angle}=\tan ^{-1} \frac{Q \sin \theta}{P+Q \cos \theta}[/tex]

Substitute the given values in the above formula,

[tex]\text {Resultant angle}=\tan ^{-1} \frac{15 \sin 60}{20+15 \cos 60}[/tex]

[tex]\text {Resultant angle}=\tan ^{-1} \frac{12.99}{20+7.5}[/tex]

[tex]\text {Resultant angle}=\tan ^{-1} \frac{12.99}{27.5}[/tex]

[tex]\text { Resultant angle }=\tan ^{-1} 0.472[/tex]

Resultant angle=25.3°

The resultant angle direction is 25.3°.

Answer:

[tex]v_f=8.17\frac{m}{s}[/tex]

Explanation:

First, we calculate the work done by this force after the box traveled 14 m, which is given by:

[tex]W=\int\limits^{x_f}_{x_0} {F(x)} \, dx \\W=\int\limits^{14}_{0} ({18N-0.530\frac{N}{m}x}) \, dx\\W=[(18N)x-(0.530\frac{N}{m})\frac{x^2}{2}]^{14}_{0}\\W=(18N)14m-(0.530\frac{N}{m})\frac{(14m)^2}{2}-(18N)0+(0.530\frac{N}{m})\frac{0^2}{2}\\W=252N\cdot m-52N\cdot m\\W=200N\cdot m[/tex]

Since we have a frictionless surface, according to the the work–energy principle, the work done by all forces acting on a particle equals the change in the kinetic energy of the particle, that is:

[tex]W=\Delta K\\W=K_f-K_i\\W=\frac{mv_f^2}{2}-\frac{mv_i^2}{2}[/tex]

The box is initially at rest, so [tex]v_i=0[/tex]. Solving for [tex]v_f[/tex]:

[tex]v_f=\sqrt{\frac{2W}{m}}\\v_f=\sqrt{\frac{2(200N\cdot m)}{6kg}}\\v_f=\sqrt{66.67\frac{m^2}{s^2}}\\v_f=8.17\frac{m}{s}[/tex]

Answer:

c. the hole in the plate and the opening in the ring get larger.

Explanation:

The hole in the plate and the ring both of them get enlarged.

The thermal expansion is very much similar to the optical expansion of the shadow of an object.

The change in length of an object is given by the relation:

[tex]\Delta l=l.\alpha.\Delta T[/tex]

where:

l = original length of the object

[tex]\alpha=[/tex] coefficient of linear expansion

ΔT = change in temperature

When heated from 20 degrees C to 100 degrees C, the diameter of the hole in a steel plate and the inner diameter of a steel ring both increase due to thermal expansion. So the correct option is C.

The correct answer to the question about what happens to the diameter of a hole in a steel plate and the inner diameter of a steel ring when both are heated is that both will get larger. This is due to the thermal expansion of materials, which states that objects expand in all dimensions as their temperature increases. When the steel plate and ring are heated from 20 degrees C to 100 degrees C, the particles within the steel vibrate more and push each other farther apart, causing both the solid material and the empty space within, like the hole and the opening of the ring, to increase in size.

Answer:

8684.2 kg/m³

Explanation:

Tension in the rope as a result of the weight = 8.86 N

Tension in the rope when submerge in water = 7.84

upthrust = 8.86 - 7.84 =1.02 N = mass of water displaced × acceleration due to gravity

Mass of water displaced = 1.02 / 9.81 = 0.104 kg

density of water = mass of water / volume of water

make volume subject of the formula

volume of water displaced = mass / density ( 1000) = 0.104 / 1000 = 0.000104 m³

volume of the object = volume of water displaced

density of the object = mass of the object / volume of the object = (8.86 / 9.81) / 0.000104 = 0.9032 / 0.000104 = 8684.2 kg/m³

Answer:

The magnitude of the net force is 2.48294 N and the angle is 25.02° with respect to the vertical

Explanation:

Consider the gravitational force as [tex]\vec{F_g}=2.25\ N[/tex]

Consider the wind force as [tex]\vec{F_w}=1.05\ N[/tex]

The angle between the gravitational force and wind force is 90°

From the parallelogram law we have

[tex]F=\sqrt{F_g^2+F_w^2+2F_gF_wcos\theta}\\\Rightarrow F=\sqrt{2.25^2+1.05^2+2\times 2.25\times 1.05\times cos90}\\\Rightarrow F=2.48294\ N[/tex]

The angle between the resultant and the gravitational force would be

[tex]tan^{-1}\frac{1.05}{2.25}=25.02^{\circ}[/tex]

The magnitude of the net force is 2.48294 N and the angle is 25.02° with respect to the vertical

Answer:

574.25 °

Explanation:

To know this, we need to get the expressions to calculate °F and °K.

In the case of Kelvin:

°K = °C + 273

in fahrenheit:

°F = 9/5(°C + 32)

Now, in order to know the temperature which both Kelvin and Fahrenheit are the same, we need to use both above equations, and solve for °C.

°C = °K - 273 (1)

°C = 5/9(°F - 32) (2)

Using 1 and 2 into a same expression:

°K - 273 = 5/9(°F - 32)

With this, we need to know now the moment which K = F, so, all we need to do is replace the F for the K in the above expression. Doing this, we have:

°K - 273 = 5/9(°K - 32)

°K = 0.555(°K - 32) + 273

°K = 5/9K - 17.78 + 273

°K - 5/9K = 255.22

4/9°K = 255.22

°K = 255.22 * 9 / 4

°K = 574.25 °

And this is the temperature in which both Kelvin and Fahrenheit are the same.

Final Answer:

The mass of the water is approximately 48.4 grams.

Explanation:

1. To solve this problem, we can use the principle of conservation of energy, specifically the principle of heat exchange.

2. We can calculate the heat gained by the iron rod and the heat lost by the water, and equate them since there is no heat exchange with the surroundings.

3. The formula for heat exchange is given by: [tex]\[ Q = mc\Delta T \][/tex]

  where Q is the heat exchanged, m is the mass, c is the specific heat capacity, and [tex]\( \Delta T \)[/tex] is the change in temperature.

4. We can set up the equation for heat exchange for the iron rod and the water:

  [tex]\[ mc_{\text{iron}}\Delta T_{\text{iron}} = mc_{\text{water}}\Delta T_{\text{water}} \][/tex]

5. Rearranging the equation and solving for the mass of water:

  [tex]\[ m_{\text{water}} = \frac{m_{\text{iron}}c_{\text{iron}}\Delta T_{\text{iron}}}{c_{\text{water}}\Delta T_{\text{water}}} \][/tex]

6. Substituting the given values, we can calculate the mass of water to be approximately 48.4 grams.

Therefore, the mass of the water is approximately 48.4 grams.

The mass of the water is approximately 199.8 grams.

Here's how to find the mass of the water:

1. Define the variables:

m_iron = mass of iron rod = 32.5 g

c_iron = specific heat capacity of iron = 0.49 J/g°C

T_iron_initial = initial temperature of iron rod = 21.8°C

T_water_initial = initial temperature of water = 63.3°C

T_final = final temperature of the mixture = 58.9°C

m_water = mass of water (unknown)

c_water = specific heat capacity of water = 4.186 J/g°C

2. Apply the principle of heat transfer:

Heat lost by iron = Heat gained by water

3. Set up the equation:

m_iron * c_iron * (T_iron_initial - T_final) = m_water * c_water * (T_final - T_water_initial)

4. Substitute the known values and solve for m_water:

32.5 g * 0.49 J/g°C * (21.8°C - 58.9°C) = m_water * 4.186 J/g°C * (58.9°C - 63.3°C)

5. Solve for m_water:

m_water ≈ 199.8 g

Therefore, the mass of the water is approximately 199.8 grams.

Waves can transfer energy and momentum from one place to another without a permanent shift in the mass. They propagate via different oscillation modes and can impact the propagation direction when they encounter an interface between two media.

The ability to move or change an object or what a wave carries, essentially describes the energy transfer capability of waves. According to Big Idea 6, waves can transfer energy and momentum from one place to another without permanently relocating the mass. This aspect characterizes waves and differentiates them from other phenomena.

Waves can propagate through various oscillation modes, such as transverse and longitudinal. For instance, when you shake one end of a rope, the perturbation moves in the form of a wave up to the other end of the rope, thus, facilitating energy transfer without a physical shift of the rope's parts.

Another important aspect to remember about waves is their ability to affect the path of propagation when they encounter an interface between two different media, as articulated by Enduring Understanding 6.E. This property explains various natural phenomena, such as the bending of light when it moves from air to water.

https://brainly.com/question/29334933

#SPJ11

Answer:

(a). The velocity is 0.099 m/s.

(b). The position is 19.75 m.

Explanation:

Given that,

The deceleration is

[tex]a=(-2v^3)\ m/s^2[/tex]

We need to calculate the velocity at t = 25 s

The acceleration is the first derivative of velocity of the particle.

[tex]a=\dfrac{dv}{dt}[/tex]

[tex]\dfrac{dv}{dt}=-2v^3[/tex]

[tex]\dfrac{dv}{-v^3}=2dt[/tex]

On integrating

[tex]int{\dfrac{dv}{-v^3}}=\int{2dt}[/tex]

[tex]\dfrac{1}{2v^2}=2t+C[/tex]

[tex]v^2=\dfrac{1}{4t+2C}[/tex]....(I)

At t = 0, v = 10 m/s

[tex]10^2=\dfrac{1}{4\times0+2C}[/tex]

[tex]C=\dfrac{1}{200}[/tex]

Put the value of C in equation (I)

[tex]v^2=\dfrac{1}{4\times25+2\times\dfrac{1}{200}}[/tex]

[tex]v=\sqrt{\dfrac{1}{4\times25+2\times\dfrac{1}{200}}}[/tex]

[tex]v=0.099\ m/s[/tex]

The velocity is 0.099 m/s.

(b). We need to calculate the position at t = 25 sec

The velocity is the first derivative of position of the particle.

[tex]\dfrac{ds}{dt}=v[/tex]

On integrating

[tex]\int{ds}=\int(\sqrt{\dfrac{200}{800t+1}})dt[/tex]

[tex]s=\dfrac{\sqrt{200}\times2\sqrt{800t+1}}{800}+C'[/tex]

At t = 0, s = 15 m

[tex]15=\dfrac{200}{800}+C'[/tex]

[tex]C'=15-\dfrac{200}{800}[/tex]

[tex]C'=14.75[/tex]

Put the value in the equation

[tex]s=\dfrac{\sqrt{200}\times2\sqrt{800\times25+1}}{800}+14.75[/tex]

[tex]s=19.75\ m[/tex]

The position is 19.75 m.

Hence, (a). The velocity is 0.099 m/s.

(b). The position is 19.75 m.

The velocity of an object depends on its position.

Part A: The velocity of the moving particle at t = 25 s is 0.099 m/s.

Part B: The position of the particle at t = 25 s is 15.475 m.

Velocity is defined as the rate at which the position of an object changes.

Given that the deacceleration of the particle is [tex]a = (-2v^3)[/tex]. The velocity of the particle v = 10 m/s and a position s = 15 m when t = 0.

The acceleration of the particle is given below.

[tex]a = \dfrac {dv}{dt}[/tex]

[tex]-2v^3 = \dfrac {dv}{dt}[/tex]

[tex]- 2 dt = \dfrac {1}{v^3}dv[/tex]

Integrating the above equation, we get,

[tex]\int (-2 dt) = \int \dfrac {1}{v^3} dv[/tex]

[tex]2t + C = \dfrac {1}{2v^2}[/tex]

[tex]v^2 = \dfrac {1}{4t + 2C}[/tex]

Putting t=0 s, v = 10 m/s

[tex]100 = \dfrac {1}{4\times 0 + 2C}[/tex]

[tex]100 = \dfrac {1}{2C}[/tex]

[tex]C = 5 \times 10^{-3}[/tex]

Part A: Velocity

The velocity of the particle at t = 25 s is given as below.

[tex]v^2 = \dfrac { 1}{(4\times 25) + (2\times 5\times 10^{-3})}[/tex]

[tex]v^2 = \dfrac{1}{100.01}[/tex]

[tex]v = 0.099 \;\rm m/s[/tex]

Hence the velocity of the moving particle at t = 25 s is 0.099 m/s.

Part B:  Position

The velocity of the particle is given as,

[tex]v = \dfrac {ds}{dt}[/tex]

[tex]v dt = ds[/tex]

Integrating the above equation, we get,

[tex]\int vdt = \int ds[/tex]

[tex]\int \sqrt{\dfrac {1}{4t + (\dfrac {1}{100})}} dt = s[/tex]

[tex]\int\sqrt{ {\dfrac {100}{400 t + 1}}}dt = s[/tex]

[tex]s =\dfrac {\sqrt{100} \times 2 \sqrt{400 t + 1}}{400} + C'[/tex]

Put t = 0 s, and s = 10 m,

[tex]15=\dfrac {\sqrt{100} \times 2 \sqrt{400 \times 0 + 1}}{400} + C'[/tex]

[tex]15 = \dfrac {\sqrt{100}\times 2}{400} + C'[/tex]

[tex]C' = 14.95[/tex]

Now the position at t = 25 s is,

[tex]s =\dfrac {\sqrt{100} \times 2 \sqrt{400 \times 25 + 1}}{400} + 14.95[/tex]

[tex]s =15.475 \;\rm m[/tex]

Hence the position of the particle at t = 25 s is 15.475 m.

To know more about the velocity and position, follow the link given below.

https://brainly.com/question/1439172.

Answer: M = 118.9g

Explanation:

Using the principle of moment to solve the equilibrium question,

Sum of clockwise moments is equal to the sum of anticlockwise moments

*Check attachment for the diagram

Note that the mass of the body is always located at the center i.e 50cm from the end.

To get M, taking moment about the fulcrum,

Since moment is force × perpendicular distance and according to the above principle, we have;

49×26.2= M×10.8

M= 49×26.2/10.8

M = 118.9g

Answer:

Vacuum lamp experiment

Explanation:

Edison began his work on electricity the year 1878, where he made use of platinum wire to make filaments for his lamp as the melting point of Platinum is.

However, later he concluded that Platinum pores absorbed air while heating thus reducing its melting point.

So he came up with the idea of vacuum lamp and developed quite a good vacuum lamp with the help of carbon.

Being highly resistive in nature, carbon would end up burning at quite a rapid rate.

Along with his staff, in the year 1879, Edison conducted his first fruitful experiment by using vacuum lamp with carbon filament.

Answer:

 v = 13.75 m/s

Explanation:

mass of rod (m) = 0.147 kg

spring constant (k) = 32800 N/m

initial compression (Y1) = 4.44 cm = 0.0444 m

final compression (Y2) = 1.53 cm = 0.0153 m

find the speed at the instant of contact

kinetic energy of a spring = elastic potential energy

0.5m[tex]v^{2}[/tex] = 0.5k[tex]x^{2}[/tex]

[tex]v^{2}[/tex] = [tex]\frac{0.5k[tex]x^{2}[/tex]}{0.5m} \[/tex]

where x = Y1 - Y2

x = 0.0444 - 0.0153 = 0.0291 m

[tex]v^{2}[/tex] = [tex]\frac{0.5 x 32800 x [tex]0.0291^{2}[/tex]}{0.5 x 0.147} \[/tex]

        [tex]v^{2}[/tex] = 188.95

       v = 13.75 m/s

Answer:

Bulb will remain at constant brightness for 6 hour

Explanation:

We have given resistance of the bulb R = 4 ohm

Potential difference of the battery V = 2 volt

So current [tex]i=\frac{V}{R}=\frac{2}{4}=0.5A[/tex]

Capacity of the battery is given as 3 amp hour

We have to find the time by which bulb will remain at constant brightness

So time will be [tex]=\frac{3}{0.5}=6hour[/tex]

So bulb will remain at constant brightness for 6 hour

Answer:

it will need 0.06 hectare of land

So option (c) is correct

Explanation:

We have given that 12000000 kilo calories of chicken can be produced per hectare

It is given that someone with 2000 kilo calories / day for a year

Total number of days in a year = 365

So total kilo calories of chicken = 365×2000 = 730000 kilo calories

As 12000000 kilo calories of chicken can be produced per hectare

So 730000 kilo calories need a land of [tex]=\frac{730000}{12000000}=0.06hectare[/tex]

So it will need 0.06 hectare of land

Final answer:

To provide someone with 2,000 kilocalories/day for a year, 0.06 hectares of land used for chicken production is needed, as the closest correct answer.

Explanation:

The question asks how much land is needed to provide someone with 2,000 kilocalories/day for a year if 12,000,000 kilocalories of chicken can be produced per hectare. First, calculate the total kilocalories needed for a year by multiplying 2,000 kcal/day by the number of days in a year (365), which equals 730,000 kcal/year. Then, find how much land is needed by dividing the total annual kilocalorie requirement (730,000 kcal) by the amount of kilocalories produced per hectare (12,000,000 kcal).

This calculation gives us:

730,000 kcal / 12,000,000 kcal/ha = 0.0608333 ha

Therefore, the closest answer is c. 0.06 ha.

Answer:

Cold front

Explanation:

The occurrence of cold front takes place when colder air at the surface pushes up the warmer into the atmosphere.

The movement of these cold fronts takes place at a faster pace as compared to the other fronts and are these are linked with the most violent types of weather such as severe thunderstorms are produced.

Answer:

68 db

Explanation:

Since now instead of one two dogs are barking simultaneously close to each other, therefore we take n =2.

Ignoring interference effects, the barking of two dogs result in a higher level of intensity which is given by,

β(db)=10×㏒(2)

=3 db

So, a reasonable estimate for the raised Intensity Level is: 65db+3db = 68db

The intensity level of two identical dogs barking together would be approximately 68 dB, as an increase in

sound intensity leads to an increase in the decibel level.

The intensity level of a sound is determined by its amplitude and is measured in decibels (dB). The relationship between intensity and decibel level is logarithmic, which means that an increase of 10 dB corresponds to a tenfold increase in intensity. Hence, if two identical dogs are barking very close to each other their combined sound would be twice as intense as one dog barking alone. However, this does not mean that the decibel level would double. In fact, when the intensity of a sound is doubled, the increase in decibel level is about 3 dB. Thus, if a single dog barking has an intensity level of 65 dB, two dogs barking together would have an estimated intensity level of 68 dB.

https://brainly.com/question/15089336

#SPJ3

Answer:

v₂ = 3.44 m/s

Explanation:

given,                                                

Dan is gliding on skateboard at = 4 m/s

speed of skateboard = 8 m/s              

mass of Dan = 50 Kg                                

mass of skateboard = 7 Kg                            

Speed of Dan when his feet hit the ground = ?

Using conservation of momentum            

       PE(initial) = PE(final)                              

       (M+m)V = m v₁ + M v₂                  

       (50+7)x 4 = 7 x 8 + 50 x v₂        

       50 x v₂ =172                              

            v₂ = 3.44 m/s                  

speed of Dan when his feet hit the ground = v₂ = 3.44 m/s

Answer:

All these is caused by the repulsion force.

Explanation:

The electroscope produces a series of electric charges that produce a repulsion force when is putted in contact with a electric charged object.

As the physics law mentions, two different forces are repealed, the electrocospe is charged negatively and the object positively, causing a repulsion force that avoids that both objects touch the other.

The block of ice would have lost half of its gravitational potential energy after sliding halfway down the frictionless inclined plane. Therefore, its gravitational potential energy will be 2.5 Joules.

The question is about the concept of energy conservation in physics, specifically the gravitational potential energy. The gravitational potential energy (U) of an object is given by the formula U = mgh, where 'm' is the mass of the object, 'g' is the acceleration due to gravity, and 'h' is the height from the reference point.

In this case, we know that the block of ice has a gravitational potential energy of 5.0 Joules when it's at the top of the incline. When the block of ice has slid halfway down the incline, it will have lost half of its height. Therefore, it would have lost half of its gravitational potential energy. Hence, after sliding halfway down the incline, the block's gravitational potential energy will be 2.5 Joules.

https://brainly.com/question/23134321

#SPJ12

Final answer:

To find the final temperature of the system, we can use the principle of conservation of energy. The heat lost by the hot metal is equal to the heat gained by the water. Using the given equation, we can solve for the specific heat capacity of the metal, which is found to be 3.75 J/g°C.

Explanation:

To find the final temperature of the system, we can use the principle of conservation of energy. The heat lost by the hot metal is equal to the heat gained by the water. We can use the equation:m1c1(T1 - T) = m2c2(T - T2)

where:

m1 is the mass of the metal (34.5 g)

c1 is the specific heat capacity of the metal

T1 is the initial temperature of the metal (75°C)

T is the final temperature of the system (39°C)

m2 is the mass of the water (64.0 g)

c2 is the specific heat capacity of water (4.18 J/g°C)

T2 is the initial temperature of the water (25°C)

Plugging in the given values, we can solve for c1: 34.5g × c1 × (75°C - 39°C) = 64.0g × 4.18 J/g°C × (39°C - 25°C)

Simplifying the equation gives:34.5g × c1 × 36°C = 64.0g × 4.18 J/g°C × 14°C

Dividing both sides by 34.5g × 36°C gives:c1 = (64.0g × 4.18 J/g°C × 14°C) / (34.5g × 36°C)

Calculating the value gives:c1 = 3.75 J/g°C

The final temperature for both the aluminum and water at thermal equilibrium is 17.3 °C. This is calculated using the principle of conservation of energy. The heat lost by aluminum equals the heat gained by water.

To find the final temperature of a 32.5 g cube of aluminum and 105.3 g of water at thermal equilibrium, we use the principle of conservation of energy. The heat lost by the aluminum will be equal to the heat gained by the water.

Let us simplify: (32.5 g) x (0.900 J/g°C) x (T_final - 45.8 °C) = - (105.3 g) x (4.186 J/g°C) x (T_final - 15.4 °C)

Therefore, the final temperature of both substances at thermal equilibrium is **17.3 °C**.

Answer:

[tex]X_2=25.27m[/tex]

Explanation:

Here we will call:

1. [tex]E_1[/tex]: The energy when the first spring is compress

2. [tex]E_2[/tex]: The energy after the mass is liberated by the spring

3. [tex]E_3[/tex]: The energy before the second string catch the mass

4. [tex]E_4[/tex]: The energy when the second sping compressed

so, the law of the conservations of energy says that:

1. [tex]E_1 = E_2[/tex]

2. [tex]E_2 -E_3= W_f[/tex]

3.[tex]E_3 = E_4[/tex]

where [tex]W_f[/tex] is the work of the friction.

1. equation 1 is equal to:

[tex]\frac{1}{2}Kx^2 = \frac{1}{2}MV_2^2[/tex]

where K is the constant of the spring, x is the distance compressed, M is the mass and [tex]V_2[/tex] the velocity, so:

[tex]\frac{1}{2}(20)(8)^2 = \frac{1}{2}(0.3)V_2^2[/tex]

Solving for velocity, we get:

[tex]V_2[/tex] = 65.319 m/s

2. Now, equation 2 is equal to:

[tex]\frac{1}{2}MV_2^2-\frac{1}{2}MV_3^2 = U_kNd [/tex]

where M is the mass, [tex]V_2[/tex] the velocity in the situation 2, [tex]V_3[/tex] is the velocity in the situation 3, [tex]U_k[/tex] is the coefficient of the friction, N the normal force and d the distance, so:

[tex]\frac{1}{2}(0.3)(65.319)^2-\frac{1}{2}(0.3)V_3^2 = (0.16)(0.3*9.8)(2) [/tex]

Volving for [tex]V_3[/tex], we get:

[tex]V_3 = 65.27 m/s[/tex]

3. Finally, equation 3 is equal to:

[tex]\frac{1}{2}MV_3^2 = \frac{1}{2}K_2X_2^2[/tex]

where [tex]K_2[/tex] is the constant of the second spring and [tex]X_2[/tex] is the compress of the second spring, so:

[tex]\frac{1}{2}(0.3)(65.27)^2 = \frac{1}{2}(2)X_2^2[/tex]

solving for [tex]X_2[/tex], we get:

[tex]X_2=25.27m[/tex]

The second spring will compress by 25.27 meters to bring the mass to a stop.

To solve this problem, we will go step-by-step considering energy conservation and the work done by friction.

1) Calculate the potential energy stored in the first spring:
The spring constant k is 20 N/m and the compression x is 8 m. The potential energy (PE) in the spring is calculated using the formula:

PE = (1/2) * k * x²

PE = (1/2) * 20 N/m * (8 m)²= 640 J

When the spring is released, this potential energy will convert to kinetic energy (KE) of the mass:

KE = 640 J

Calculate the work done by friction (Wf):
The frictional force (f) is calculated by:

f = μ * m * g

f = 0.16 * 0.3 kg * 9.8 m/s² = 0.4704 N

The work done by friction over a distance (d) of 2 m is:

Wf = f * d

Wf = 0.4704 N * 2 m = 0.9408 J

The kinetic energy after overcoming friction is:

Remaining KE = 640 J - 0.9408 J = 639.0592 J

Calculate the compression of the second spring (x₂):
The remaining kinetic energy will convert into potential energy in the second spring with a constant of 2 N/m.

PE = (1/2) * k₂ * x₂²

We set the remaining KE equal to this potential energy:

639.0592 J = (1/2) * 2 N/m * x₂²

639.0592 J = x₂²

x₂ = √639.0592 = 25.27 m

Therefore, the second spring will compress by 25.27 meters.

Answer:

m = 4.65 kg

Explanation:

As we know that the mass of the water that evaporated out is given as

[tex]m = 0.0250 kg[/tex]

so the energy released in form of vapor is given as

[tex]Q = mL[/tex]

[tex]Q = (0.0250)(2.25 \times 10^6)[/tex]

[tex]Q = 56511 J[/tex]

now the heat required by remaining water to bring it from 15 degree to 100 degree

[tex]Q_2 = ms\Delta T[/tex]

[tex]Q_2 = (4 - 0.025)(4186)(100 - 15)[/tex]

[tex]Q_2 = 1.41\times 10^6J[/tex]

total heat required for above conversion

[tex]Q = 56511 + 1.41 \times 10^6 = 1.47 \times 10^6 J[/tex]

now by heat energy balance

heat given by granite = heat absorbed by water

[tex]m(790)(500 - 100) = 1.47 \times 10^6[/tex]

[tex]m = 4.65 kg[/tex]

Answer:

The original frequency of the guitar string is 437.0 Hz

Explanation:

It is an interesting phenomenon that when two waves of slightly different frequencies (f1 and f2) interfere they produce beats, and the frequency (fb) of those beats is:

[tex] f_{b}=\mid f_{1}-f_{2}\mid [/tex] (1)

Note that because the equation takes the absolute value of the difference between f1 and f2 we have two possible results of [tex] f_{1}-f_{2} [/tex] that satisfy the equation, those are:

[tex] 440.0-f_{2}=3\Longrightarrow f_{2}=437.0\,Hz [/tex]

[tex] -(440.0-f_{2})=3\Longrightarrow f_{2}=443.0\,Hz [/tex]

Because the frequency of the beat is heard to decrease when the frequency of the guitar string is increased, that means the guitar string was at first under the pitch, so the original frequency of the guitar string is 437.0 Hz

Final answer:

The original frequency of the guitar string was 437 Hz, since the string was out of tune and produced a beat frequency of 3 Hz with a 440 Hz tuning fork, and the beat frequency decreased when the string was tightened.

Explanation:

The original frequency of the guitar string can be determined using the concept of beat frequency. The beat frequency is the absolution difference between the frequencies of two sounds. In this case, the beat frequency was 3 Hz when the guitar string was sounded with the 440.0 Hz tuning fork.

Since the beat frequency decreased when the string tension was increased, the original frequency of the string must have been lower than the tuning fork. Therefore, the original frequency of the guitar string could be either 437 Hz or 443 Hz. However, since tightening the string increases its frequency and resulted in a decrease in the beat frequency, this indicates that the original frequency was 437 Hz (440 Hz - 3 Hz).

Answer:

0 N

Explanation:

The elevator is under free fall. So, when a body is under free fall, the acceleration is only due to gravity. So, the acceleration of the elevator or the woman inside it, is acceleration due to gravity in the downward direction.

The spring scale gives the value of the normal force acting on the woman and doesn't give the exact weight of the woman. Under normal conditions, when the spring scale is at rest, then the upward normal force equals the weight and hence weight of a body is equal to the normal force acting on the body.

But, here, the body is not at rest. Weight\tex](mg)[/tex] acts in the downward direction and normal force[tex](N)[/tex] acts in the upward direction. The woman is moving down with acceleration equal to acceleration due to gravity[tex](g)[/tex]

So, we apply Newton's second law on the woman.

[tex]\textrm{Net force} = \textrm{mass}\times \textrm{acceleration}\\F_{net}=ma[/tex]

Net force is equal to the difference of the downward force and upward force.

[tex]F_{net}=mg-N[/tex]

Now, [tex]F_{net}=ma[/tex]

[tex]mg-N=mg\\N=mg-mg=0[/tex]

Therefore, the reading on the spring scale is 0 N.

Answer:

Explanation:

by Doppler effect

F apparent = F real x (Vair +- Vobserver) / (Vair +- Vsource)

case1 :if observer is approaching a source then put a + in numerator and - in denominator

case 2 : if observer is going away from source then do opposite.

it is case1 cos observer is moving toward wall . actually wall is acting as a source for observer

so

F apparent = 240 x (344 + vp ) / (344 - vp )

now F apparent - Freal = beat frequency of 6.00 Hz

so {240 x (344 + vp ) / (344 - vp )} - 230 = 6

240 x (344 + vp -344 + vp) / (344 - vp ) = 6

240 x 2 x vp = 6 x (344 - vp )

480 vp = 2064 - 6 x vp

486 x vp = 2064

vp = 4.24 m/s

Answer:

Part a)

[tex]W = 2716.5 J[/tex]

Part B)

[tex]W = -2716.5 J[/tex]

Explanation:

Part A)

While escalator is moving up work done to move the person upwards is given as

[tex]W = mgh[/tex]

here we know that

m = 63 kg

h = 4.4 m

now we have

[tex]W = 63 \times 9.8 \times 4.4[/tex]

[tex]W = 2716.5 J[/tex]

Part B)

Work done while we move from up to down

So we have

[tex]W = - mgh[/tex]

so we have

[tex]W = -2716.5 J[/tex]

Answer:

Boyle's Law

[tex]\therefore P_1.V_1=P_2.V_2[/tex]

Explanation:

Given that:

initially:

pressure of gas, [tex]= P_1[/tex]

volume of gas, [tex]= V_1[/tex]

finally:

pressure of gas, [tex]= P_2[/tex]

volume of gas, [tex]= V_2[/tex]

To solve for final volume [tex]V_2[/tex]

According to Avogadro’s law the volume of an ideal gas is directly proportional to the no. of moles of the gas under a constant temperature and pressure.

According to the Charles' law, at constant pressure the volume of a given mass of an ideal gas is directly proportional to its temperature.

But here we have a change in the pressure of the Gas so we cannot apply Avogadro’s law and Charles' law.

Here nothing is said about the temperature, so we consider the Boyle's Law which states that at constant temperature the volume of a given mass of an ideal gas is inversely proportional to its pressure.

Mathematically:

[tex]P_1\propto \frac{1}{V_1}[/tex]

[tex]\Rightarrow P_1.V_1=k\ \rm(constant)[/tex]

[tex]\therefore P_1.V_1=P_2.V_2[/tex]

Final answer:

To calculate the new volume V2 in Boyle's Law, use the formula V2 = P1V1/P2, ensuring that P1 and P2 are in the same pressure units and that V1 and V2 are in the same volume units.

Explanation:

To determine the new volume V2 after a change in pressure of an ideal gas, one can utilize Boyle's Law, which states that at a constant temperature, the pressure of a gas is inversely proportional to its volume. The formula representing Boyle's Law is P1V1 = P2V2. In this equation, P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume. To solve for V2, you simply rearrange the equation to V2 = P1V1/P2.

Remember that in order for Boyle's Law to be applied correctly, both volumes should be in the same unit. If you solve for V2 and find it to be greater than V1, it indicates that the pressure has decreased, consistent with the inverse proportionality.

Answer:

a)

2.5 rads⁻²

b)

1.5 rads⁻²

Explanation:

a)

[tex]R[/tex] = distance of the center of mass from the wire = 5 cm = 0.05 m

[tex]F_{g}[/tex] = Force of gravity on walker

[tex]M[/tex] = mass of  walker = 71 kg

Force of gravity on walker is given as

[tex]F_{g} = Mg\\F_{g} = (71)(9.8)\\F_{g} = 695.8 N[/tex]

[tex]I[/tex] = Rotational inertia of walker = 14 kgm²

[tex]\alpha[/tex] = Angular acceleration about the wire

Torque equation is given as

[tex]F_{g} R = I \alpha \\(695.8) (0.05) = (14) \alpha \\\alpha = \frac{(695.8) (0.05)}{14} \\\alpha= 2.5 rads^{-2}[/tex]

b)

[tex]F_{p}[/tex] = Force of gravity on pole

[tex]m[/tex] = mass of  walker = 14 kg

Force of gravity on pole is given as

[tex]F_{p} = mg\\F_{g} = (14)(9.8)\\F_{g} = 137.2 N[/tex]

[tex]r[/tex] = distance of the center of mass of pole from the wire = 10 cm = 0.10 m

Torque equation is given as

[tex]F_{g} R - F_{p} r = I \alpha \\(695.8) (0.05) - (137.2)(0.10) = (14) \alpha \\\alpha= \frac{21.07}{14} \\\alpha=1.5 rads^{-2}[/tex]

Answer:before throwing and after catching the ball

Explanation:

When basketball is in the hand of player net force on it zero as holding force is canceled by gravity Force. During its entire motion gravitational force is acting on the ball which is acting downward. Even at highest point gravity is constantly acting downwards.

After catching the ball net force on it zero as holding force is canceled by gravity force and ball is continue to be in stationary motion.          

The point in time where the zero net force acted on the ball is before throwing and after catching the ball

At the time of basketball is in the hand of the player, the net force should be zero since holding force is canceled via gravity Force. At the time of overall motion,  gravitational force should be acted on the ball which is acting downward. After catching the ball net force on it zero since holding force should be canceled via gravity force and ball should be continue in stationary motion.    

Find out more information about the  Force here: brainly.com/question/26115859?referrer=searchResults

Answer: The answer is 225 joules