Answer:
answer is quantitive this guy is wrong
Explanation:
did it on usatestprep
A +1.0 c charged object and a +2.0 c charged object are separated by 100 m. where should a -1.0x10-3 c charged object be placed on a line between the positively charged objects so that the net electrical force exerted on the negatively charged object is zero?
The negative charge should be placed 41 m from +1.0 C charged object
Further explanationElectric charge consists of two types i.e. positively electric charge and negatively electric charge.
There was a famous scientist who investigated about this charges. His name is Coulomb and succeeded in formulating the force of attraction or repulsion between two charges i.e. :
[tex]\large {\boxed {F = k \frac{Q_1Q_2}{R^2} } }[/tex]
F = electric force (N)
k = electric constant (N m² / C²)
q = electric charge (C)
r = distance between charges (m)
The value of k in a vacuum = 9 x 10⁹ (N m² / C²)
Let's tackle the problem now !
Given:
Q₁ = +1.0 C
Q₂ = +2.0 C
R₁ = x
R₂ = 100 - x
q = -1.0 × 10⁻³ C
Unknown:
x = ?
Solution:
In order to produce a total force = 0, the electric forces acting on this negative charge must be in the opposite direction and equal in magnitude.
We assume the distance of this negative charge to the positive charge +1.0 C is x, then:
[tex]F_1 = F_2[/tex]
[tex]k\frac{Q_1q}{R_1^2} = k\frac{Q_2q}{R_2^2}[/tex]
[tex]\frac{Q_1}{R_1^2} = \frac{Q_2}{R_2^2}[/tex]
[tex]\frac{1}{x^2} = \frac{2}{(100 - x)^2}[/tex]
[tex]\sqrt{\frac{1}{x^2}} = \sqrt{\frac{2}{(100 - x)^2}}[/tex]
[tex]\frac{1}{x} = \frac{\sqrt{2}}{100 - x}[/tex]
[tex]100 - x = \sqrt{2}x[/tex]
[tex]x + \sqrt{2}x = 100[/tex]
[tex]x ( 1 + \sqrt{2} ) = 100[/tex]
[tex]x = \frac{100}{1 + \sqrt{2}}[/tex]
[tex]x = 100(\sqrt{2} - 1) ~ m[/tex]
[tex]x \approx 41 ~ m[/tex]
Learn moreThe three resistors : https://brainly.com/question/9503202A series circuit : https://brainly.com/question/1518810Compare and contrast a series and parallel circuit : https://brainly.com/question/539204Answer detailsGrade: High School
Subject: Physics
Chapter: Static Electricity
Keywords: Series , Parallel , Measurement , Absolute , Error , Combination , Resistor , Resistance , Ohm , Charge , Small , Forces
A light bulb does 100 joules of work in 2.5 seconds. How much power does it have.
Final answer:
To calculate power, divide energy in joules by time in seconds. The light bulb with 100 joules of work done in 2.5 seconds has a power of 40 watts.
Explanation:
The student is asking how to determine the power of a light bulb based on the work done over time. The formula to calculate power is:
P = W / t
where P is power in watts (W), W is energy in joules (J), and t is time in seconds (s). In this case, the light bulb does 100 joules of work in 2.5 seconds. So, applying the formula:
P = 100 J / 2.5 s = 40 W
Hence, the power of the light bulb is 40 watts.
Kara built a model of how molecules behave when they are in solid form. She filled a clear plastic box with marbles to the very top and put the lid on the box. When she shakes the box, the marbles can barely move. Which of the following is a limitation of Kara's model?
Answer:
The marbles must be held in a box, but solids hold together without a container.
Explanation:
study island!!!
Answer:
The marbles must be held in a box, but solids hold together without a container.
Lexy used the formula shown to calculate the force of gravity on a space shuttle. Fg = G What does 3 × 105 kg represent? the difference between Earth’s mass and the space shuttle’s mass the sum of Earth’s mass and the space shuttle’s mass the mass of Earth the mass of the space shuttle
This term shows the mass of the space shuttle
Explanation:We know that the mass of the Earth is 5.972 × 10^24 kg. Similarly the sum of mass of earth and the mass of shuttle must be a greater number as compared to the number given. It simply means that the mass of earth is itself 5.972 × 10^24 kg and the value given is 3 × 105 kg so it is obvious that if was the sum then it must be greater than the mass of earth. Therefore we can say that this not the mass of earth, neither the sum of mass of earth and shuttle, but this is only the mass of space shuttle which is the last multiple choice.
Answer:
The answer is D
Explanation:
The equation of motion of a particle is s = t3 â 27t, where s is in meters and t is in seconds. (assume t ⥠0.) (a) find the velocity and acceleration as functions of t.
To find the velocity and acceleration of a particle as functions of time in a given equation of motion, differentiate the equation with respect to time. The velocity function is v = 3t² - 27 and the acceleration function is a = 6t.
Explanation:Velocity: To find the velocity, differentiate the equation of motion with respect to time which gives v = ds/dt. In this case, v = 3t² - 27.
Acceleration: Similarly, differentiate the velocity equation with respect to time to find acceleration, which results in a = dv/dt. Here, a = 6t.
Which structures allow for the removal of wastes from the developing fetus?
The fetus relies upon its mother as it develops. These are some of the things it needs:
protection against knock and bumps, and temperature changes oxygen for respiration nutrients (food and water)The developing fetus also needs its waste substances removing.
The fetus is protected by the uterus and the amniotic fluid, a liquid contained in a bag called the amnion.
Volume or intensity of a sound wave is measured by the size of the _________ and reported in decibels.
Answer:
Amplitude
Explanation:
The intensity (or volume) of a sound wave is proportional to the square of the sound wave:
[tex]I\propto A^2[/tex]
where A is the amplitude of the wave.
The amplitude of a sound wave is measured as the maximum displacement of the wave with respect to its equilibrium position.
The intensity is measured in Decibels (dB), which is related to the logarithmic ratio between the power of two different sounds, i.e. the difference in decibels between two sounds is given by
[tex]10 Log (\frac{P_2}{P_1})[/tex]
where P1 and P2 are the power of the two sounds.
a chandelier weighing 100 newtons is suspended by two wires that make an angle of 60° with the ceiling. Find the tension in both wires.
58 newtons
87 newtons
116 newtons
231 newtons
A light train made up of two cars is traveling at 90 km/h when the brakes are applied to both cars. know that car a has a mass of 30 mg and car b has a mass of 20 mg, and the braking force is 40 kn on each car.
The Physics related question involves concepts of Newton's Third Law and momentum. When brakes are applied, a force is exerted against the car's motion. The impact differs based on the car's mass, and its initial momentum which is the product of its mass and velocity.
Explanation:The subject of the question is related to Physics, specifically focusing on the topic of Newton's laws of motion and momentum. To understand the scenario, we should first comprehend that when the brakes are applied to the cars, a force is exerted which slows them down. This relates to Newton's Third Law - for every action, there's an equal and opposite reaction.
Considering the given scenario, when the brakes apply a force of 40 kN on each car, this force works against their forward momentum, slowing them down. The impact of the force will differ based on the mass of each car, with the lighter car likely slowing down faster than the heavier one. This can be calculated if we know the exact measure of force and the braking distance.
Additionally, the momentum of the cars before the brakes are applied could also be calculated using the formula momentum = mass x velocity, which in this case would have different results for each car due its mass difference, despite identical velocities. Overall, the problem illustrates how both the Newton's third law and principles of momentum come into play in everyday physics scenarios like that of braking cars in motion.
Learn more about Newton's Third Law and Momentum here:https://brainly.com/question/23201949
#SPJ3
You probably have noticed that, as you increase ω, there will be a value, ωcrit, for which r(ω) goes to infinity. find ωcrit. answer in terms of k and m.
Describe how gravity aids in the formation of stars
Final answer:
Gravity aids in star formation by leading to cloud collapse and nucleus heating.
Explanation:
Gravity aids in the formation of stars by causing the collapse of clouds of gas and dust, leading to increased density in the core regions where nuclear fusion begins.
As the gas collapses, the gravitational force overcomes the thermal pressure, allowing the core to contract and heat up, initiating the process of star formation.
The gravitational attraction of the newly forming stars also plays a crucial role in increasing the density of the surrounding cloud material, facilitating the formation of organic molecules that can be incorporated into newly formed planetary systems.
What are the properties of elements based on their placement on the periodic table?
A concrete bridge is built of 315-cm-long concrete slabs with an expansion joint between them. the slabs just touch on a 115∘f day, the hottest day for which the bridge is designed.
The expansion joints in a concrete bridge allow for thermal expansion, preventing buckling by accommodating changes in size due to temperature variation. This allows the bridge to withstand frequent temperature changes without significant structural damage.
Explanation:The subject of this question involves a phenomenon known as thermal expansion, which is a concept in physics. When the temperature of a material changes, the material can expand or contract. Concrete, like many other materials, expands when heated and contracts when cooled.
On a sunny day, especially a very hot one like 115 degrees Fahrenheit, the heat from the sun causes the concrete slabs in the bridge to expand. Thanks to the expansion joints between the slabs, the bridge can change length without buckling under this thermal stress. The expansion joints are designed to accommodate this precise thermal expansion, allowing the slabs to expand and contract freely with changes in temperature.
In the case of the Auckland Harbour Bridge in New Zealand, the bridge is equipped with thermal expansion joints that prevent it from buckling due to thermal expansion. Similarly, the change in length of the bridge due to temperature changes is usually small and distributed across multiple expansion joints, making the process almost unnoticeable in daily use.
Learn more about Thermal Expansion here:https://brainly.com/question/30242448
#SPJ11
5. Describe how a battery works. (4 points)
How does the internal circuitry differ among the ohmmeter, voltmeter, and ammeter?
1200 meters is less than 1 kilometer
TRUE OR FALSE
if you weigh 110 pounds , in kilograms the number will be greater than 110
TRUE OR FALSE
Phosphorus bursts into flame when exposed to oxygen. What element might be used when storing pure phosphorus to keep it from reacting?
Argon
Explanation;Phosphorus is an element found in group 15 of the periodic table, it is one of the element that belongs to nitrogen family.The element phosphorus exhibits allotrophy, namely; white phosphorus, red phosphorus and black phosphorus. Phosphorus, particularly the white phosphorus combines with oxygen so easily that it catches fire automatically. Thus, as a safety precaution, white phosphorus is stored under water in laboratories. It may be also stored in argon, since argon is an inert element which belongs to the noble gases group.Answer:
Noble gases. (Argon)
Explanation:
Noble gases are found in the group eight element on the periodic table and are known for their inert nature.
Meaning that they don't react easily with other elements.
Phosphorus is a reactive element that when exposed to air (oxygen) catches fire.
If phosphorus is stored under Noble gases escpecially Argon it won't react with the surrounding air in the laboratory.
A wave traveling in water has a frequency of 250 Hz and a wavelength of 6.0 N. What is the speed of the wave?
18. In a solid conductor such as a metal, what is the cause of an electric current? A. A flow of positive and negative charges. B. A flow of positive charges only. C. +A flow of negative charges only. D. A flow of protons. E. A flow of neutrons.
A merry-go-round is spinning at a rate of 4.0 revolutions per minute. cora is sitting 1.0 m from the center of the merry-go-round and cameron is sitting right on the edge, 2.0 m from the center. what is the relationship between the rotational speeds of the two children?
Answer:
Same.
Explanation:
The rotational speed of an object is given by :
[tex]\omega=\dfrac{\theta}{t}[/tex]
[tex]\theta[/tex] is the angular displacement
t is the time taken
The angular speed of a merry- go- round is 4 revolutions per minute. There are two persons Cora and Cameron. Cora is sitting 1.0 m from the center of the merry-go-round and Cameron is sitting right on the edge, 2.0 m from the center.
The rotational speeds of both of the children remains the same because it is independent of the distance from the center.
in the free-body diagram shown above, which of the following is the gravitational force acting on the car?
a.5800 N
b.755 N
c.14700 N
d.13 690 N
Answer:
c. 14700 N
Explanation:
The gravitational force acting on the car in a free-body diagram depends on the car's mass and gravitational constant. Without the mass or the context provided by the diagram, it is impossible to definitively answer the question.
Explanation:In order to determine the gravitational force acting on the car in this free-body diagram, you first need to understand the underlining principles of force. The force of gravity on an object is determined by the object's mass and the gravitational constant, typically represented by the formula F=mg. However, without further information such as the mass of the car or the free-body diagram referenced in the question, it's not possible to definitively answer this question. The options a) 5800N, b) 755N, c) 14700N, or d) 13690N could be potential answers depending on the mass of the car, the scale of the diagram, and the context of the problem.
Learn more about Gravitational Force here:https://brainly.com/question/32609171
#SPJ3
A solid has a _____ volume and a ____ shape.
fixed, variable, fixed, variable
HELP
how does my potential energy increase and decrease?
Scientists in a test lab are testing the hardness of a surface before constructing a building. Calculations indicate that the entire structure would sink by a certain amount for every additional floor that is added. If the maximum permissible limit for depression of the structure is 20 centimeters, how many floors can be safely added to the building?
14
15
18
23
Find the magnitude of a fourth force on the stone that will make the vector sum of the four forces zero.
The magnitude of the fourth force will be 90.1956 N and the angle will be 75.535° made from the horizontal in the first quadrant.
Given to us
Force A, [tex]F_A = 100\ N[/tex]Angle made by Force A from the horizontal, [tex]\theta_A = 30^o[/tex]Force B, [tex]F_B = 80 \ N[/tex]Angle made by Force B from the Vertical, [tex]\theta_B = 30^o[/tex]Force C, [tex]F_C = 40 \ N[/tex]Angle made by Force C from the Horizontal, [tex]\theta_C = 53^o[/tex]For Angle made by Force B,As the angle given to us is from the vertical axis, we will make it from the horizontal,
[tex]\theta_B = (90^o -30^o) = 60^o[/tex]
Now, the magnitude of a fourth force on the stone should make the vector sum of the four forces zero. therefore,
[tex]\sum F_{horizontal} = 0[/tex]
[tex]F_A Cos(\theta_A) -F_B Cos(\theta_B) -F_C Cos(\theta_C) = F_{Dh}[/tex]
[tex]100 Cos(30^o) -80Cos(60^o) -40Cos(53^o) = F_{Dh}\\\\F_{Dh} = 22.5299\ N[/tex]
[tex]\sum F_{Vertical} = 0[/tex]
[tex]F_A Sin(\theta_A) +F_B Sin(\theta_B) -F_C Sin(\theta_C) = F_{Dv}[/tex]
[tex]100 Sin(30^o) +80Sin(60^o) -40Sin(53^o) = F_{Dv}\\\\F_{Dv} =87.3365\ N[/tex]
Resultant Force[tex]R = \sqrt{(F_{Dh})^2+(F_{Dv})^2}\\\\R = \sqrt{(87.3365)^2+(22.5299)^2}\\\\R = \sqrt{7627.6642+507.5963}\\\\R = \sqrt{813526}\\\\R = 90.1956\ N[/tex]
The angle of the resultant,[tex]Tan (\theta_D) = \dfrac{F_{Dv}}{F_{Dh}}\\\\Tan(\theta_D) = \dfrac{87.3365}{22.5299}\\\\Tan(\theta_D) = 3.87647\\\theta_D = Tan^{-1} 3.87647\\\theta_D =75.535^o[/tex]
Hence, the magnitude of the fourth force will be 90.1956 N and the angle will be 75.535° made from the horizontal in the first quadrant.
Learn more about Forces:
https://brainly.com/question/14866438
Identify which best describes the energy used to pluck guitar strings to make sound.
Fluorine is more electronegative than oxygen because 1. the outer orbitals of fluorine are located further from the nucleus than the outer orbitals of oxygen. 2. the effective nuclear charge of fluorine is greater than that of oxygen. 3. the effective nuclear charge of oxygen is greater than that of fluorine. 4. the outer orbitals of oxygen are located closer to the nucleus than the outer orbitals of fluorine. 5. false; oxygen is more electronegative than fluorine.
Fluorine is more electronegative than oxygen because the effective nuclear charge of fluorine is greater than that of oxygen.
Electronegativity is the tendency of an atom to attract electrons. The effective nuclear charge is the net positive charge experienced by an electron in an atom. Fluorine has a smaller atomic radius than oxygen. This means that the electrons in the outer orbitals of fluorine are closer to the nucleus than the electrons in the outer orbitals of oxygen.
The closer the electrons are to the nucleus, the stronger the attractive force between the electrons and the nucleus. This means that the effective nuclear charge of fluorine is greater than that of oxygen. Therefore, fluorine is more electronegative than oxygen.
To know more about the Orbitals, here
https://brainly.com/question/14274837
#SPJ3
A bicycle wheel is rotating at 49 rpm when the cyclist begins to pedal harder, giving the wheel a constant angular acceleration of 0.45 rad/s2 . what is the wheel's angular velocity, in rpm, 9.0 s later?
Answer:
Angular velocity, [tex]\omega_f=9.180\ rad/s[/tex]
Explanation:
It is given that
Initial angular velocity of the wheel, [tex]\omega_o=49\ rpm[/tex]
Since, 1 revolutions per minute = 0.10471 radians per second
[tex]\omega_o=49\ rpm=5.1307\ rad/s[/tex]
Angular acceleration of the wheel, [tex]\alpha =0.45\ rad/s^2[/tex]
Time taken, t = 9 s
Let [tex]\omega_f[/tex] is the final velocity of the wheel 9 seconds later. Using the equation of kinematics to find it :
[tex]\omega_f=\omega_o+\alpha t[/tex]
[tex]\omega_f=5.1307+0.45\times 9[/tex]
[tex]\omega_f=9.180\ rad/s[/tex]
So, the final angular velocity of the wheel is 9.180 rad/s. Hence, this is the required solution.
The bicycle wheel's angular velocity, in rpm is 87.68 rpm.
Given the following data:
Time = 9.0 secondsAngular acceleration = 0.45 [tex]rad/s^2[/tex]Initial angular velocity of the bicycle wheel = 49 rpm.Conversion:
1 rpm = 0.1047 rad/s
49 rpm = X rad/s
Cross-multiplying, we have:
[tex]X = 49[/tex] × [tex]0.1047[/tex]
X = 5.1303 rad/s
To find the bicycle wheel's angular velocity, in rpm, we would use the first equation of kinematics:
[tex]w_f = w_o + at[/tex]
Where:
[tex]w_f[/tex] is the final angular velocity.[tex]w_o[/tex] is the initial angular velocity.a is the angular acceleration.t is the time.Substituting the given parameters into the formula, we have;
[tex]w_f = 5.1303 + 0.45(9)\\\\w_f = 5.1303 + 4.05[/tex]
Final angular velocity = 9.1803 rad/s
Next, we would convert the value in rad/s to rpm:
Conversion:
1 rpm = 0.1047 rad/s
X rpm = 9.1803 rad/s
Cross-multiplying, we have:
[tex]9.1803 = 0.1047X\\\\X = \frac{9.1803}{0.1047}[/tex]
X = 87.68 rpm.
Final angular velocity = 87.68 rpm.
Read more: https://brainly.com/question/14703849?referrer=searchResults
20. A 0.145 kg mass of tungsten at 130.0 °C is placed in a 0.502 kg of water at 22.0 °C. The mixture reaches equilibrium at 28.6 °C. Calculate the specific heat of tungsten. (specific heat of water = 4180 J/kg C)
Givens:
Unknown:
Equation: macaΔTa = - mbcbΔTb
Substitute:
Solve:
Two meteoroids are heading for earth. their speeds as they cross the moon's orbit are 1.0 km/s . part a the first meteoroid is heading straight for earth. what is its speed of impact?
Answer : [tex]v_{2} = 11.2\ km/s[/tex]
Explanation : The total energy of the meteoroids
Total Energy = Kinetic Energy + Potential Energy
[tex]E = \dfrac{1}{2}mv^{2} - \dfrac{GMm}{R}[/tex]
Total energy remain constant.
Now, for both meteoroids
[tex]\dfrac{1}{2}m(v_{2}^{2} - v_{1}^{2}) = GMm\left(\dfrac{1}{R}-\dfrac{1}{r}\right)[/tex]
Where, R = radius of the earth
r = distance of the moon
M = mass of the earth
m = mass of the meteoroid
[tex]v_{2}^{2} = 2GM\left(\dfrac{1}{R}-\dfrac{1}{r}\right)+ v_{1}^{2}.....(I)[/tex]
Now, put the values in equation (I)
[tex]v_{2}^{2} = 1 + 2\times6.67\times10^{-11}\times6\times10^{24}\left(\dfrac{1}{6.37} - \dfrac{1}{384}\right)\times10^{-6}[/tex]
[tex]v_{2}^{2} = 12361\times 10^{4}\ m/s[/tex]
[tex]v_{2} = 11118.003\ m/s[/tex]
[tex]v_{2} = 11.2\ km/s[/tex]
Hence, this is the required solution.
The speed of the meteorite at its impact on Earth will be [tex]\boxed{11.1\,{{{\text{km}}}\mathord{\left/{\vphantom{{{\text{km}}}{\text{s}}}}\right.\kern-\nulldelimiterspace}{\text{s}}}}[/tex] or [tex]\boxed{11088.24\,{{\text{m}}\mathord{\left/{\vphantom{{\text{m}}{\text{s}}}}\right.\kern-\nulldelimiterspace}{\text{s}}}}[/tex] .
Further Explanation:
The meteorite in the outer space at a particular distance from the Earth has its energy stored in the form of the kinetic energy as well as the potential energy.
The kinetic energy of the meteorite is given by:
[tex]{E_k} = \frac{1}{2}m{v^2}[/tex]
The potential energy of the meteorite at a particular height from Earth is given by:
[tex]{E_p} = - \frac{{GMm}}{r}[/tex]
Here, [tex]M[/tex] is the mass of the Earth, [tex]m[/tex] is the mass of satellite and [tex]r[/tex] is the distance of the meteorite from the centre of the Earth.
The total energy of the meteorite is given as:
[tex]\begin{aligned}{E_T}&={E_k} + {E_p}\\&=\frac{1}{2}m{v^2}-\frac{{GMm}}{r}\\\end{aligned}[/tex]
As the meteorite moves from the moon’s orbit towards the Earth, the potential energy of the meteorite gets converted into the kinetic energy.
Using conservation of energy for the meteorite from the moon’s orbit to the Earth’s surface:
[tex]\begin{aligned}\frac{1}{2}mv_1^2-\frac{{GMm}}{r}&=\frac{1}{2}mv_2^2-\frac{{GMm}}{R} \hfill\\v_1^2-v_2^2&=2GM\left({\frac{1}{r}-\frac{1}{R}}\right) \hfill\\{v_2}&=\sqrt {v_1^2-2GM\left({\frac{1}{r}-\frac{1}{R}}\right)}\hfill\\\end{aligned}[/tex]
Here, [tex]{v_1}[/tex] is the speed of the meteorite in moon’s orbit, [tex]r[/tex] is the distance of the moon’s orbit from centre of Earth and [tex]R[/tex] is the radius of Earth.
The meteorite passes the moon’s orbit at the speed of [tex]1\,{{{\text{km}}}\mathord{\left/{\vphantom{{{\text{km}}}{\text{s}}}}\right.\kern-\nulldelimiterspace}{\text{s}}}[/tex] .
We know that the distance of the Moon’s orbit from the centre of Earth is [tex]3.84 \times{10^5}\,{\text{km}}[/tex] and the radius of the Earth is [tex]6371\,{\text{km}}[/tex] .
Substitute the values in the equation of Energy.
[tex]\begin{aligned}v_{f}&=\sqrt{(1)^{2}-2(6.67\times10^{-11})(5.97\times10^{24})\left(\dfrac{1}{384}-\dfrac{1}{6.37}\right)10^{-6}}\\&=\sqrt{1.229\times10^{8}}\text{ m/s}\\&=11088.24\text{ m/s}\\&\approx11.1\text{ km/s}\end{aligned}[/tex]
Thus, the speed of the meteorite striking the Earth is [tex]\boxed{11.1\,{{{\text{km}}}\mathord{\left/{\vphantom{{{\text{km}}}{\text{s}}}}\right.\kern-\nulldelimiterspace}{\text{s}}}}[/tex] or [tex]\boxed{11088.24\,{{\text{m}}\mathord{\left/{\vphantom{{\text{m}}{\text{s}}}}\right.\kern-\nulldelimiterspace}{\text{s}}}}[/tex] .
Learn More:
1. Calculate the total force on the earth due to Venus, Jupiter, and Saturn https://brainly.com/question/2887352
2. Compare the surface area–to–volume ratios of Earth and Venus https://brainly.com/question/7227193
3. A rocket being thrust upward as the force of the fuel being burned https://brainly.com/question/11411375
Answer Details:
Grade: College
Subject: Physics
Chapter: Gravitation
Keywords:
Meteorite, moon’s orbit, 1km/s, two meteorite, heading for, speed of impact, 11.1 km/s, 384000 km, total energy, heading straight.