All of the following are base units of the SI system except:

kilogram

kelvin

meter

pound

liter

Answers

Answer 1

Answer:

pound

liter

Explanation:

The SI system is the system of measurement that is the most widely used around the world. It is actually the modern day version of the metric system. The majority of the countries in the world use this measuring system, but there are few that don't, such as the United States, Liberia, and Myanmar (Burma). Canada and the United Kingdom are kind off in an in between situation, as they have this system as official, but the population still very often uses other measurements that are tradition, often leading to confusion.

This measuring system has seven base unites:

second (s) - measures time

meter (m) - measures length

kilogram (kg) - measures mass

ampere (A) - measures electric current

kelvin (K) - measures temperature

mole (mol) - measures amount of substance

candela (cd) - measures luminous intensity


Related Questions

Question 4 2 pts _is the largest solar energy collector on earth and plays a central role in stabilizing the earth's climate system. Ocean Land Vegetation Air

Answers

Answer:

Ocean is the largest solar energy collector on earth and plays a central role in stabilizing the earth's climate system

Explanation:

Ocean is the largest solar energy on the planet Earth .

Water covers more than 70 % of the planet surface , and due to its large surface spread , water absorbs heat and the temperature increases .

The ability to absorb and store large amount of energy , plays a major role in stabilizing the climate system of Earth .

Hence , the correct answer from the options given in question is - ocean .  

1.name the three types of plate boundaries(and their subtypes), and give an example where each can be found

2. what are the relations, if any, of volcanoes and earthquakes to plate bound-aries? See"plate tectonics and people" on the website

3. what type of plate boundary is found in southern California, and what is the name of the fault zone and the type of fault?

3a. Base on what you know about plate boundaries,would you expect to find volcanoes presently formin in southern california? why?

Answers

Answer:

As given below.

Explanation:

The three types of plate boundaries are Divergent, Convergent and Transform boundary. The transform boundary of the plate tectonic rift is found near the entire Californian coast. These boundaries are demarcated by shear zones, the plate tectonic boundary of divergence is found in place of the splitting of the oceanic crusts like in mid-oceanic ridges. The third boundary is of convergence in nature, which is found in most of the parts of the world like the Pacific and North America plates. If any volcanoes and earthquakes on the plate boundaries arise then they are bound to be cause and consequence of two lighter and heavier plates colliding with each other and as result, the plates burn against one another and create seismic shocks. Southern California has transform boundary and Fault is the San Andreas Fault that extends to 1,200 kilometers. The active fault with shallow earthquakes and Dextral motion. No as the shear zones do not have volcanic activities, and southern California is drifting to the western sides due to the movements along with the pacific plate.

We can determine the age of most Mesozoic rocks through "carbon dating," which relies on the radioactive decay of Carbon-14.

true or false?

Answers

Answer:

The statement is false.

Explanation:

Carbon dating using the radioactive decay of Carbon-14 is reliable up to 50,000 years. It is mostly used for living organisms that were younger than that period. Rocks are much older than 50,000 years and rocks from the Mesozoic era would not be able to be dated using Carbon-14. It will require another element with longer half-lives in order to determine ages higher than 65 million years ago.

Question 14 Multiple Choice Worth 3 points) Which of the following contributes to the movement of tectonic plates? 1. deposition of sediment on the ocean floor II. push of newly formed crust III. mantle convection I only Ill only I and II ll and III I, II, and II

Answers

Final answer:

The push of newly formed crust and mantle convection primarily contribute to tectonic plate movement, while sediment deposition doesn't significantly influence it. The correct answer is D) II and III.

Explanation:

The movement of tectonic plates is influenced by several factors. The primary driving force is mantle convection, a slow process by which heat escapes from the Earth's interior, causing an upward flow of warmer material and the slow sinking of cooler material. This convection causes the molten rocks of the asthenosphere to rise and fall, creating forces that make the tectonic plates move.

Another contributing factor is the push of newly formed crust at divergent plate boundaries. For instance, as new crust forms at the mid-ocean ridge due to causing the old crust to move aside, which induces plate movement.

However, the deposition of sediment on the ocean floor typically doesn't have a significant effect on plate movement. It can add weight to the oceanic plate, but this doesn't contribute substantially to the overall forces driving plate tectonics.

So, among the choices given, both the push of newly formed crust and mantle convection contribute to the movement of tectonic plates. Therefore, the correct option is D) II and III.

Learn more about Tectonic Plate Movement here:

https://brainly.com/question/3970445

#SPJ11

5 (10 pts). Describe the difference between a primary producer, primary consumer and secondary or tertiary consumer, and give an example of each. What happens to the flow of energy between these levels, and what happens in terms of the concentration of toxins like DD

Answers

Answer:

Food chain as given below

Explanation:

A consumer is a living creature in the food chain that eats other consumers and maintains a balance in the food web. Primary producers are all green plants that prepare their food by their ability to utilize the sun's energy and convert that available raw energy into starch in their body by the process of photosynthesis.  These Autotrophs take up the organic matter through their roots in the form xylem and phylum and giving oxygen in the air. They form the base of the food chain on which are dependent Herbivorous like sheep, goat, cow, etc.  The secondary consumers are called the Carnivorous, like the lion, tiger, etc that feed on the bodies of herbivorous. Above this level is that of Omnivorous i.e both plant and animal eaters like the crow, man, and cat. As stated by the law of thermodynamics energy can neither be destroyed nor created but transforms itself. The flow of energy at each trophic level gets successively transferred to the next trophic level from primary to secondary tertiary and so on. Likewise, toxin concentration in trophic levels increased each level upwards and leads to biomagnification that is harmful to the entire food chain.

The gravitational pull on the ocean at night causes the water to more or less bulge towards the moon. I wonder if out in the ocean the same thing happens but since the ocean is so vast, it isn't noticeable since it is away from the shoreline, does this occur out in the ocean as well? How does gravitational pull occur?

Answers

Answer:

Earth's rotation and gravitational attraction of the sun and the moon to some extent are responsible for the motion of tides in the oceans. As the oceans are so vast there exist a cyclic flow water.

Explanation:

As the earth has its gravity and so does the other phenomenon like stars and moon have there thought this is not felt directly as the tidal bulges that are seen around the earth occur at two times in a day and two times at evening time due to the course of earth rotation having a cyclic time of 12 hours. The gravitational pull of the moon is not that strong but since it is close to the earth's surface the tidal bulges are felt on a full moon day and a new moon day as the oceanic currents rise by the gravitational attraction of the moon at night. In the day this is noticeable, as the sun has a large attractive force on the planet derives the winds and pressure belts around the globe, When these celestial objects all fall in the same line both ends on earth experience two small and large tidal bulges on east and west sides.

At local solar noon in the northern hemisphere, the sun is south. Which way do shadows point at noon?

Answers

Answer:

The sun tends to rise from the eastern direction always and sets in the western direction. In the northern hemisphere, during the noontime, the sun reaches the center of the horizon and is directed towards the southern side. This means that when a person faces the sun at noon, by walking directly towards it, then it will let him move in the southern direction.  

Thus, If one walks with the sun at his/her back, then it means that he/she is heading towards the north. Whereas, if a one moves with the sun at his front, then this means that the person is heading towards the south. The opposite case arises in the Southern Hemisphere.

In the northern hemisphere, the shadow moves from the western to eastern direction, and it points the north direction at noon. In the southern hemisphere, the shadows indicate the south direction at noon.

Final answer:

At local solar noon in the northern hemisphere, shadows point north as the sun is positioned in the southern sky. This is the underlying principle for how sundials operate, where the shortest shadow of the day points north at noon.

Explanation:

At local solar noon in the northern hemisphere, when the sun is in the southern sky, shadows always point away from the Sun. Therefore, shadows point north at noon. This phenomenon occurs because the Sun's position in the sky is to the south, casting shadows in the opposite direction. This principle is also the basis for how sundials work, with the shadow of the gnomon indicating the time of day. During the summer solstice, for instance, the gnomon's shortest shadow at solar noon points directly north, showcasing the Sun's highest position in the sky over the course of the year.

Which of the following actions best exemplifies environmental sustainability?

a. using resources to benefit future generations, even if it means lower current availability

b. using resources to satisfy current needs without compromising future availability

c. letting each country decide what is in its best interest

d. letting future generations figure out how to solve their own problems

e. increasing economic output even if it harms the environment

Answers

Answer: Option (B) is correct

Explanation:

Environmental sustainability is referred as the rates at which one can harvest renewable resource, continue creation pollution, and also concentrate on non-renewable resource depletion which can be indefinitely continued. If these are are not continued indefinitely then this means that these given resources are not considered to be sustainable.

Under this one takes care of the natural resource and look after it in order not to exhaust them.

Question 21 1 pts In what year did GPS become free to the public? a) 1983 b) 1965 c) 1972 d) 1941

Answers

Answer:

1983

Explanation:

The First GPS was made available to the public this year as earlier it was under the control of the U.S military and used for strategic purposes. As they feared that giving it to the public could cause a potential loss or damage to the integrity of the country. Originally developed by the military for surveillance and monitoring program it consisted of 24 satellite systems and each satellite transmitted unique signals that were decoded to compute the precise location of satellites. GPS consists of User, Control, and User segments.

Answer:

and i oop

Explanation:

Which of the following earth surface more likely have the lowest Albedo?

Question 47 options:

Grass

Ice



Forest

Concrete

Answers

Answer:

Forests

Explanation:

From all the option in the question forest ahve the least Albedo which is About 5% to 10%. Whereas all the other like grass, Ice and concreate have Albedo higher than the forest.

Albedo, the amount of the heat energy from the sun is reflected back to the atmosphere. The higher the reflection of heat higher will be the Albedo. The forest have lots of tree cover thereby it traps greater amount of heat than it reflects back and hence lower albedo.

Select all of the correct answers: AU is:

varies dependant upon the time of year

used primary to measure things within the solar system

a measurement of distance

the distance from the center of the Sun to the center of the Earth

is the distance from the Earth to the Moon

Answers

Answer:

used primary to measure things within the solar system

a measurement of distance

the distance from the center of the Sun to the center of the Earth

Explanation:

Astronomical unit ( AU )

The value of 1 astronomical unit ( AU ) = 92,955,807 miles or 149,597,871 km , which is equivalent to about 150 million kilometres  . it is the average distance between the sun and the earth .

It is used as a measurement unit , for the solar system , the AU , measures the distance , hence its units are miles , km etc .

Final answer:

An Astronomical Unit, abbreviated as AU, is the average distance from Earth to the Sun, used primarily to measure distances within the solar system, and is about 150 million kilometers. (First and fourth options)

Explanation:

An Astronomical Unit (AU) is the unit of length defined as the average distance between Earth and the Sun. This distance is about 150 million kilometers (93 million miles) or precisely 149,597,870.7 kilometers. The AU is commonly used to measure distances within the solar system, making it a fundamental concept in astronomy.

The statements regarding the AU as a measurement that varies depending upon the time of year or as being the distance from the Earth to the Moon are incorrect. While the Earth-Sun distance does vary over the course of a year due to Earth's elliptical orbit, the AU represents the average of these distances.

Moreover, the distance from Earth to the Moon is measured in Earth-Moon distances, known as lunar distances, not in AUs.

How are changes in atmospheric CO2 over time recorded in the geologic record? List at least 4 tools/methods for reconstructing past atmospheric CO2.

Answers

Answer:

boron and carbon isotope, Phytane, Ice cores, Corals, Lake and ocean sediments etc.

Explanation:

Drillings in ice cores like within ice sheets of Greenlands, Antarctica started in 1956. Collecting core samples of 4 and a half inches and use of molecules of water O 16 and 18 that helps to determine the past atmospheric carbon. Corals, skeletal rings have bands of paleo-climatological information and as their body is made of the calcium carbonates these limes creating organisms help to determine the atmospheric concentration of carbon on prehistoric earth. The use of oxygen isotope in lakes and oceans has given data related to the content of ocean sediments, and values deposited in clay and sand. The use of phytane a diterpenoid alkane that breaks down chlorophyll is used to estimate the ancient Co2 level.

Investigate two ways in which water shortages, erosion, water
diversion, floods or contamination of a water resource, or other
water processes have affected human history. How did humankind meet
the challenges of the impacts?

Answers

Answer:

The earth undergoes various types of geological processes that control different conditions on the earth's surface. When these processes are very severe along with human activities, then the organisms and humans have to face a lot of difficulties. Due to the occurrence of heavy flood in any region, the people lose their houses, the agricultural crop fields are affected by losing their fertility. Water is one of the essential elements for the survival of life and it creates havoc when they are contaminated because they become unfit for drinking. So a lot of problems is needed to be faced due to natural calamities like floods, tsunamis, and droughts.

Human beings can meet up the challenges of these impacts by undertaking certain steps-

(1) The waster materials produced from the industries and factories must be collected and dumped somewhere instead of allowing it to get mixed up with the rivers and streams.

(2) The dams must be properly constructed and should be periodically surveyed.

(3) Water must be preserved and make proper and minimum use of it.

(4) Pollution must be reduced as much as possible.

(5) Afforestation must be done so that the plants and trees can hold the soil and maintain its fertility, rather than getting eroded.

Identify statements true of the lithosphere and asthenosphere. Choose one or more: A. The asthenosphere is relatively soft compared to the rigid lithosphere. B. The lithosphere "floats" on the asthenosphere. C. The lithosphere is denser than the asthenosphere. D. The asthenosphere underlies the lithosphere.

Answers

Final answer:

The lithosphere is a rigid solid composed of the crust and upper mantle, while the asthenosphere is a partially molten, flowing layer of the upper mantle.

Explanation:

The lithosphere and asthenosphere are divisions based on the mechanical properties of Earth's interior.

1. The lithosphere is composed of both the crust and the upper mantle which behaves as a brittle, rigid solid. It is about 100 kilometers thick.

2. The asthenosphere is partially molten upper mantle material that behaves plastically and can flow.

Statements true of the lithosphere and asthenosphere:

A. The asthenosphere is relatively soft compared to the rigid lithosphere.

B. The lithosphere "floats" on the asthenosphere.

D. The asthenosphere underlies the lithosphere.

Learn more about the Lithosphere and asthenosphere here:

https://brainly.com/question/32419623

#SPJ2

Why is the June solstice associated with the Southern
Hemisphere?

Answers

Answer:

June solstice marks the beginning of summer in southern hemisphere, due the earth rotational motion and reverse properties of the both hemispheres.

Explanation:

The summer solstice is associated with the midsummer, occurs when the earth poles are the maximum inclination to the sun. A within the antarctic hemisphere there is continuous daylight as the maximum axial tilt is around 23.44 degrees. Depending on the shift of the calendar days the summer solstice occurs around Dec 20 and 23rd of the year. This is due to the earth moves in an elliptical motion. In the southern hemisphere, the sun moves from East to West. It contains about 60.7% of the water on the earth

Which geographical feature formed the northern border of the Mauryan Empire?

A. Narmada River

B. Himalaya Mountains

C. Deccan Plateau

C. Thar Desert

Answers

Final answer:

The northern border of the Mauryan Empire was formed by the Himalayan Mountains, which served as a natural boundary and provided protection against northern invasions. The correct option is (B).

Explanation:

The northern border of the Mauryan Empire was formed by a significant geographical feature known as the Himalayan Mountains. These formidable peaks, arising from the collision of the Indian Plate with the Eurasian Plate, have played a crucial role in the physical geography and cultural history of South Asia.

The Himalayas not only provide a natural boundary between South Asia and East Asia, particularly between India and China but have also influenced the religious and cultural practices of the civilizations that flourished around them.

The Mauryan Empire, which is notable in history for its extensive reach across South Asia by 250 BCE, included the rugged terrain of the Himalayas within its northern frontier.

This inclusion of the Himalayas in its borders afforded the empire natural protection and a definitive boundary against invasion from the north. Thus, option B, the Himalaya Mountains, is the answer, as they formed the northern boundary of the Mauryan Empire.

What is the correct scientific notation for 0.000002765?

Answers

Answer:

2.765*10^-6

Explanation:

Simply move the decimal place to behind the 2. The number of places it moves is the power to the base (which will be always 10). The power will also be negative because it is less than 1.

the distance north and south of the equator is measured in degrees of?

Answers

Answer:

Latitudes

Explanation:

The distance traveling in the northern and the southern hemisphere from the equator is measured in terms of latitudes. It is expressed in degrees. These are the geographical coordinates that specify a particular location on earth. It ranges from 0° to 90°, where the 0° line is the equator that divides the earth into two halves. And the 90° latitude area in the polar region of both the hemisphere. The earth is bulging at the equatorial region and flattened at the poles.

The latitude plays an important role in the identification of any place on earth.

Thus, the north and south of the equator are measured in the degrees of latitudes.

Why does the moon appear dark from space?
But why does it appear bright when observed from earth, especially when it is full moon?

Answers

moon look dark in space because the space is not a body it is a black area where there is no tress of light. Our earth is luminous body and the moon is also a luminous body that's why the earth is getting light from the sun in the day and moon in night.the answer is simple due to the movement of earth,sun and moon.

The moon appears dark from space because there is no way for light to travel  and be scattered.

People on earth see the moon as bright because of the light that is scattered by the atmosphere.

While in space, it is dark because there is no way for light to travel. Since light is not scattered, the true features of the moon is seen as dark. While in space, because there is no atmosphere, it would always be dark during the day and in the night time.

Read more on https://brainly.com/question/24018294?referrer=searchResults

7. Ductile fracture in a tensile-test sample is also called .

a) cup-and-cone fracture b) transgranular fracture c) intergranular fracture d) cleavage

8. Which of the following is NOT right for rare-earth metals?

a) Rare-earth metals are generally difficult to mine and process, and hence are available in small quantities.

b) Rare-earth metals are less common in earth’s crust than precious metals such as gold and platinum.

c) Rare-earth metals have unique magnetic and electrical properties, and are essential in many modern technologies.

d) The widely used rare-earth metals include yttrium, lanthanum, cerium, samarium, neodymium, etc.

Answers

Answer:

7. a) cup-and-cone fracture ,  all are right.

Explanation:

Ductility is the ability of the ability to undergoing significant plastic deformation before the rapture. An example of the cup and cone fracture can show this, which is a type of failure observed in ductile metals. Being subjected to uniaxial force it is essential to separate the body into pieces as the application of intense tensile stress. As ductility and malleability are all ways correlated thee material properties depend on the temperature of the metal. Rare earth metal is not commonly found in places and the chemical composition also varies as these are diverse and are used by people in everyday device some smartphones also consist of these elements.

QUESTION 5 What is a Platonic Idea? A. Sensible forms within things B. An immaterial and intelligible form of sensible things C. The traditional gods that moves sensible things D. A human thought about sensible things

Answers

Answer:

B. An immaterial and intelligible form of sensible things

Explanation:

Platonic Idea -

It is given by Plato ,

He proposed this theory via the concept of eternal form , according to this theory , the immutable essence that can only be participated in the sensible things .

The idea is an invisible reality , an eternal thing , an immaterial and the prototype of the reality .

Final answer:

A Platonic Idea refers to an eternal, immaterial form of sensible objects, as conceptualized by the Greek philosopher Plato. These forms stand in contrast to the physical, changeable realm and are considered the true essence of things. Plato believed that understanding these forms is the key to wisdom, justice, and courage.

Explanation:

A Platonic Idea, according to the Greek philosopher Plato, is an immaterial and intelligible form of sensible things, which gives them their identity. These forms critically differ from the ever-changing realm as the forms exist eternally in the invisible realm that Plato conceived. They shape our perception of reality, but are not subject to the change and decay that physical objects experience.

In contrast, Aristotle's philosophy focused more on the four causes, the material basis of things, instead of the immaterial forms. This material basis includes matter, form, agent of change, and the aim or purpose of things.

Plato further argued that virtue and understanding are derived from accessing the realm of the forms. That is why he proposed the idea of philosopher-kings who have the deepest understanding of the forms.

Learn more about Platonic Idea here:

https://brainly.com/question/14905467

#SPJ12

What is renewable energy? In at least 100 words, give three examples of renewable energy AND EXPLAIN how they are related to climate in terms of rainfall, air temperature, winds, and insolation.

Answers

Answer:

Answered

Explanation:

Renewable energy are those sources of energy that can be renewed in the environment. Renewable resources are in abundance in the environment. They cause little to no pollution to the environment and can be procured through right technique.

These energies include solar energy, hydel energy, tidal energy, wind energy and geothermal energy.  They are related to the environment because they are procured from it. Wind energy through winds, tidal energy through tide, and geothermal energy can be obtained from the Earth heat. They are also called clean energy since they do not cause any pollution.

Q1 Which is the best description of a climate forcing?

Something that warms the planet

Something that cools the planet

Something that creates an energy imbalance for the planet

Something that balances the energy of the planet

Answers

Answer

Something that creates an energy imbalance for the planet

Climate forming is something that can create an energy imbalance for the planet. The difference between incoming and out going radiation is called the planets radiative forcing(RP). A climate forcing factor will change the climate of the Earth.It can either cause heating of the plane , positive RF or cause cooling of the planet, negative RF.

"Man has too long forgotten that the earth was given to him for usufruct alone, not for consumption, still less for profligate waste." What does Marsh mean? (About 100 – 200 words). Word limit is a general guideline.

This question is from the global environment by thomas easton from the man and nature . prompt

Answers

Answer:

The marshes are defined as the type of wetland where the water covers the ground surface for a long period of time. Here, the trees are absent and are mostly dominated by the grasses and other small herbivore plants. They are commonly formed in delta type of environment where the rivers adds water into the seas. It forms an isolated and distinct ecosystem.

The marshes in nature, behaves like a filtration process as the vegetation that are present in marshes takes up more amount of nutrients for their growth and expansion. But, if it does not use up these excess nutrients then it cause water pollution comprising of nitrogen and phosphorous.  

They also plays an important role in the reduction of damages that are caused by a flood.

The marshes are sometimes seasonal and it occurs when the height of the river level is relatively high, and it floods the grassland areas.

The marshes are of three types-

(1) Tidal salt marshes

(2) Tidal freshwater marshes

(3) Inland freshwater marshes.

Question 22 1 pts Which of the following represents the greatest source of domestic water usage in the U.S.? Showers Washing machines Dishwashers Toilets Faucets

Answers

Answer:

Option (4)

Explanation:

Water is the most essential element that is required by all living organism. In order to survive, water is needed. Over the years, the use of water has been increasing at a considerably higher rate. At many places, the water level has decreased. This can cause a great problem in the near future as the water on earth is depleting, either by polluting or by making excess use of it.

Currently, water is one of the major resources and one must make limited and proper use of it.

In the United States, a huge amount of water is used for domestic purpose. This includes the water that are usually used for drinking purpose, washing of dishes, toilet flushing, bathing and washing clothes, and so on.

According to the statistical record, it has been noted that in US, the maximum amount of domestic water is used in the toilets.

Thus, the correct answer is option (4).

Answer:

it is toliet

Explanation:

i just took the test

1. What problem has precession caused for many schools of astrology?

Answers

Answer:

The problem precession has caused for many schools of astrology is the marking of first day of spring in the North part of Hemisphere which was considered as zero point of the Zodiac which is approximately on March 21.

Over the past 2.5 millennia, this wobbling has moved west side along the ecliptic by 36 degrees, nearly (1/10) of the way around, nearly one whole month. So in Earlier days, those who born during the period March 21 to April 19 consider to be Aries.

Today, the sun is said to be no longer within marking point of the constellation of Aries, whereas sun is actually placed in the constellation of Pisces during the period of March 11 and April 18.

Question 9 1pts of the Earth's atmosphere is below 26km. O 50% O 100% O 48% 98%

Answers

Answer:

Earth's atmosphere is below 26 km is composed of  98%.

Explanation:

Troposepher marks the boundary for most of the convective activity to take place on the surface of the earth's this place consist of 99% of the total space for the all-weather phenomenon to occur and as a result of which is considered to a homogeneous sphere. Here the water vapor, dust particles, and other gaseous bodies are found and thus this layer is a life-supporting layer full of oxygen and hence, comprise all biotic components like the plants, animal and man. Above this layer there are drastic changes in temperature with increasing height as the atmospheric pressure at higher altitudes decreases and so does the life-supporting layer, it can be noted that the layer that protects the earth i.e ozone is found in the mesosphere at an altitude of 30 kilometers. Rest most of the weather phenomenon takes place here as it sets the stage for weather patterns as convective currents coming from the equator can't pass this layer.

compare and contrast organochlorine and organophosphorus
pesticides in terms of their persistence and toxicity.

Answers

Answer and Explanation:

Organochlorine :pesticides were normally utilized previously, yet many have been expelled from the market because of their well being and ecological impacts and their industriousness

For example : DDT and chlordane

Organophosphate Pesticides - These pesticides influence the sensory system by disturbing the catalyst that controls acetylcholine, a synapse. Most organophosphates are bug sprays. They were created during the mid nineteenth century, however their consequences for creepy crawlies, which are like their impacts on people, were found in 1932. Some are toxic (they were utilized in World War II as nerve specialists). Be that as it may, they as a rule are not diligent in the earth

A drainage basin bordering the sea has an area of 7500 km2 . The average precipitation for this drainage basin is 900 mm year-1 . The average surface water flow at the outlet of the drainage basin equals 22.5 × 108 m3 year-1 . The average groundwater flow to the sea is 100 mm year-1 . The averages are determined for 30 hydrological years. Determine the average actual evaporation in mm year-1 and m3 year-1.

Answers

* The average actual evaporation is **-22000 mm year-¹**. This negative value indicates that the actual evaporation is less than the precipitation and groundwater flow combined, resulting in net water accumulation within the basin.

* The average actual evaporation is **-165 million m³ year-¹**.

Here's how to determine the average actual evaporation in both mm year-¹ and m³ year-¹ for the drainage basin:

**1. Calculate the total precipitation:**

* Multiply the basin area by the average precipitation:

Total precipitation = Area * Average precipitation

Total precipitation = 7500 km² * 900 mm year⁻¹

Total precipitation = 6750000 m³ year⁻¹

**2. Calculate the total water flow:**

* Add the average surface water flow and the groundwater flow converted to m³ year⁻¹:

Total water flow = Surface water flow + Groundwater flow (converted to m³)

Total water flow = 22.5 × 10⁸ m³ year⁻¹ + (7500 km² * 100 mm year⁻¹ * 1000 m³/km²)

Total water flow = 22.5 × 10⁸ m³ year⁻¹ + 750 × 10⁶ m³ year⁻¹

Total water flow = 232.5 × 10⁸ m³ year⁻¹

**3. Calculate the actual evaporation:**

* Subtract the total water flow from the total precipitation:

Actual evaporation = Total precipitation - Total water flow

Actual evaporation = 6750000 m³ year⁻¹ - 232.5 × 10⁸ m³ year⁻¹

Actual evaporation = -165000000 m³ year⁻¹

**4. Convert actual evaporation to mm year-¹:**

* Divide the actual evaporation in m³ by the basin area and convert to mm:

Actual evaporation (mm year⁻¹) = Actual evaporation (m³) / Area

Actual evaporation (mm year⁻¹) = -165000000 m³ / 7500 km²

Actual evaporation (mm year⁻¹) = -22000 mm year⁻¹

Therefore:

* The average actual evaporation is **-22000 mm year-¹**. This negative value indicates that the actual evaporation is less than the precipitation and groundwater flow combined, resulting in net water accumulation within the basin.

* The average actual evaporation is **-165 million m³ year-¹**.

1. Using the geologic definition of mineral as your guide, determine which of the items in this list are minerals and which are not. If something in this list is not a mineral, explain. 1. Gold nugget 2. Seawater 3. Quartz 4. Cubic zirconia 5. Obsidian 6. Ruby 7. Glacial ice 8. Amber

Answers

Final answer:

Based on the geologic definition of a mineral, the gold nugget, quartz, obsidian, ruby, and amber are all minerals. Seawater, cubic zirconia, and glacial ice do not meet the criteria of a mineral.

Explanation:

According to the geologic definition of a mineral, a mineral must meet five specific criteria: it must be naturally occurring, inorganic, solid, have a specific chemical composition, and have an ordered atomic arrangement. Based on these criteria:

Gold nugget: Yes, it meets all the criteria of a mineral. Gold is naturally occurring, inorganic, solid, has a specific chemical composition (Au), and an ordered atomic arrangement.Seawater: No, it is not a mineral. Seawater is a liquid and does not have a solid form. It also lacks an ordered atomic arrangement.Quartz: Yes, it meets all the criteria of a mineral. Quartz is naturally occurring, inorganic, solid, has a specific chemical composition (SiO2), and an ordered atomic arrangement.Cubic zirconia: No, it is not a mineral. Cubic zirconia is a synthetic material created in a lab and does not occur naturally.Obsidian: Yes, it meets all the criteria of a mineral. Obsidian is naturally occurring, inorganic, solid, has a specific chemical composition (SiO2), and an ordered atomic arrangement.Ruby: Yes, it meets all the criteria of a mineral. Ruby is naturally occurring, inorganic, solid, has a specific chemical composition (Al2O3:Cr), and an ordered atomic arrangement.Glacial ice: No, it is not a mineral. Glacial ice is a form of water in the solid state, but it does not have a specific chemical composition or an ordered atomic arrangement.Amber: Yes, it meets all the criteria of a mineral. Amber is naturally occurring, inorganic, solid, has a specific chemical composition (C10H16O), and an ordered atomic arrangement.

Learn more about geologic definition of minerals here:

https://brainly.com/question/32150506

#SPJ6

The items in the list that are minerals are: 1. Gold nugget, 3. Quartz, 4. Cubic zirconia, 5. Obsidian, and 6. Ruby. The items that are not minerals are: 2. Seawater, 7. Glacial ice, and 8. Amber.

According to the geologic definition, a mineral must meet the following criteria:

1. It must be naturally occurring, which means it cannot be man-made or produced artificially.

2. It must be inorganic, meaning it cannot be derived from living organisms.

3. It must have a definite chemical composition.

4. It must have a crystalline structure, which means its atoms must be arranged in a regular, repeating pattern.

Let's apply these criteria to each item in the list:

1. Gold nugget: It is naturally occurring, inorganic, has a definite chemical composition (Au), and a crystalline structure. Therefore, it is a mineral.

2. Seawater: Although it is naturally occurring and inorganic, it does not have a definite chemical composition, nor does it have a crystalline structure. Therefore, it is not a mineral.

3. Quartz: It is naturally occurring, inorganic, has a definite chemical composition (SiO2), and a crystalline structure. Therefore, it is a mineral.

 4. Cubic zirconia: It is a synthetic material and not naturally occurring, so it does not meet the criteria to be classified as a mineral. However, if we consider naturally occurring zirconia (baddeleyite), it would be a mineral because it meets all the criteria: it is inorganic, has a definite chemical composition (ZrO2), and a crystalline structure.

5. Obsidian: It is naturally occurring, inorganic, and has a definite chemical composition similar to granite. However, obsidian is sometimes considered a mineraloid because it does not have a regular crystalline structure, but rather a glassy structure. For the purpose of this question, we will consider it a mineral because it meets most of the criteria.

6. Ruby: It is naturally occurring, inorganic, has a definite chemical composition (Al2O3 with chromium impurities), and a crystalline structure. Therefore, it is a mineral.

7. Glacial ice: It is naturally occurring, but it is not considered a mineral because it does not have a definite chemical composition (it can contain various impurities) and its structure is not crystalline but rather hexagonal.

8. Amber: It is a fossilized tree resin and is organic in nature, not inorganic. Therefore, it does not meet the criteria to be classified as a mineral.

In summary, the gold nugget, quartz, cubic zirconia (if naturally occurring), obsidian, and ruby are minerals, while seawater, glacial ice, and amber are not.

Other Questions
Why does allopatric speciation occur more often in animals than sympatric speciation? Earths gravity keeps the moon in orbit by pulling on it. What does the moons gravity do? A. pulls back on the Earth B. can only pull on smaller objects such as asteroids but has no effect on the EarthC. doesnt affect anything D. pushes the moon away from the Earth PLEASE HELP ASAP!!! WILL MARK AS BRAINLIEST! Which sentence contains an underlined proper noun? A. Finally, he sailed across the {Pacific Ocean} back to California. B. Someone clanged the {bell} for dinner at the Lazy S Ranch. C. We went to the swap meet at the Rose Bowl to look for {antiques}. D. We climbed aboard the {boat} and sailed over to Fire Island. A claim put forth by some purveyors of health foods is that vitamins obtained from natural sources are more healthful than those obtained by chemical synthesis. For example, pure Lascorbic acid (vitamin C) extracted from rose hips is thought to be healthier than pure Lascorbic acid manufactured in a chemical plant. Are the vitamins from the two sources different? Can the body distinguish a vitamin's source? Using the information below for Singing Dolls, Inc., determine the total manufacturing costs incurred during the year: Work in Process, January 1 $ 53,200 Work in Process, December 31 38,600 Direct materials used 14,100 Total Factory overhead 7,100 Direct labor used 28,100 An inventor proposes an engine that operates between the 27 deg C warm surface layer of the ocean and a 10 deg C layer a few meters down. The claim is that this engine can produce 100 kW at a flow of 20 kg/s. Is this possible? A random sample of 50 consumers taste tested a new snack food. Their responses were coded (0: do not like; 1: like, 2: indifferent) and recorded below: a. Test H0: p = 0.5 against Ha: p > 0.5, where p is the proportion of customers who do not like the snack food (n=17). Use = 0.10. b. Find the observed significance level of your test. A baseball is popped straight up into the air and has a hang-time of 6.25 S.Determine the height to which the ball rises before it reaches its peak. (Hint: thetime to rise to the peak is one-half the total hang-time.) is giving a speech on job specialization for her business class. She will most likely tell the class that one of the reasons for job specialization isA .special skills are not needed to complete specialized tasks.B .not everyone wants to do the same thing.C. a worker repeating the same job becomes bored and slows down the operation.D. the organization is too large for one person to do everything. A patient was climbing a ladder, slipped on a rung, and fell on the right side of the chest. X-ray studies reveal three rib fractures, and the patient is complaining of pain with inspiration. What is the anticipated treatment for this patient?a. Chest strappingb. Mechanical ventilationc. Coughing and deep breathing with pillow splintingd. Thoracentesis 3(3x+4)=10+2(4x-5) solve What license or certifications are required to become a pediatrician? Two objects are ________ when they have the same size and shape. Whats the blank? Which was the original difference between Sunnis and Shias? please help-many pointsWhich pair of numbers is relatively prime?A.68 and 119B.40 and 395C.119 and 715 D.63 and 56 Which method do scientist use to track evolutionary changes over time?A. radiocarbon datingB. paleomagnetic datingC. DNA analysisD. Potassium argon dating The element lead (Pb) consists of four naturally occurring isotopes with masses of 203.97302, 205.97444, 206.97587, n 207.97663 amu. The relative abundances of these four isotopes are 1.4, 24.1, 22.1 and 52.4%, respectively. From this data, calculate the atomic mass of lead. A motorist drives north for 35.0 min at 85.0 km/h and then stops for 15.0 min. He then continues north, traveling 130 km in 2.00 h. (a) what is his total displacement? b) what is his average velocity? A mechanics shop has a 16,500 N car sitting on a large car lift of 125 cm^2 piston. How much force is needed to be applied to the small piston of area 4.51 cm^2 to lift it? What is the circumference of a circle with a diameter of 3.4 cm?Use 3.14 for pi.Enter your answer as a decimal in the box.