are these compounds— methane and CH4 ionic or covalent?

Answer:

Probably should be discarded.

Explanation:

Answer:

4

Explanation:

The balanced chemical equation for the reaction between Hydrochloric acid (HCl) and potassium hydroxide (KOH) is: HCl + KOH → KCl + H₂O.

A student has asked for the balanced chemical equations for Hydrochloric acid and potassium hydroxide. The balanced chemical equation for the reaction between Hydrochloric acid (HCl) and potassium hydroxide (KOH) is:

HCl + KOH → KCl + H₂O

In this neutralization reaction, Hydrochloric acid (a strong acid) reacts with potassium hydroxide (a strong base) to produce potassium chloride (a salt) and water. This type of reaction is typical between acids and bases where the hydrogen ion (H⁺) from the acid combines with the hydroxide ion (OH⁻) from the base to form water.

The percent ionization of the solution is 0.017%.

The steps involved are;

The equation of the reaction is;

            CH3CH2CH2COOH(aq)  ⇄ H^+(aq)  + CH3CH2CH2COO^-(aq)

I               0.0075                               0                0.085

C              -x                                        +x             + x

E          0.0075 - x                               x               0.085 + x

The Ka of the acid = 1.5 x 10^-5

Hence;

1.5 x 10^-5 = x(0.085 + x)/0.0075 - x

1.5 x 10^-5 (0.0075 - x ) =  x(0.085 + x)

1.1 x 10^-7 - 1.5 x 10^-5x = 0.085x + x^2

x^2 + 0.085x - 1.1 x 10^-7 = 0

x = 0.0000013 M

Percent ionization=  0.0000013 M/0.0075 × 100/1

= 0.017%

Learn more about percent ionization: https://brainly.com/question/9173942

Final answer:

The Br2 molecule is nonpolar because it consists of two identical bromine atoms sharing electrons equally, leading to no permanent dipole moment.

Explanation:

When determining if a molecule such as Br2 is polar or nonpolar, molecular symmetry plays a key role. The molecule Br2 consists of two bromine atoms covalently bonded together. Since both atoms are the same and share electrons equally, the bond between them is nonpolar. Furthermore, because the molecule is made up of only two identical atoms, it has no molecular geometrical complexity that could lead to an uneven distribution of charge. In contrast, molecules like CO2 and H2O have polar bonds, but CO2 is nonpolar due to its linear shape causing the bond moments to cancel, while H2O is polar due to its bent shape and the presence of lone pairs on the oxygen atom which do not allow the bond moments to cancel out.

A method for the student to find the total mass of the balls, without the problems of the balls not remaining in the balance, to synchronize a type of container or box that could house all the balls. With the container still empty, the student should weigh the container and note the weight.  After that, the student should place the balls into the container and weigh the container along with the balls and note the weight.

In the second weighing the student will have the weight of the container along with the weight of the balls, but in the first weighing the student weighed the container alone. Thus, we can conclude that if the student subtracts the weight of the balls with the container by the hair of the soxinho regipiente, the student will result in the total mass of the balls.

Final answer:

The strength of a weak acid is related to the strength of its conjugate base through an inverse relationship.

Explanation:

The strength of a weak acid is related to the strength of its conjugate base through an inverse relationship. According to the general rule, the stronger the acid, the weaker the conjugate base, and vice versa. This can be understood by considering the concept of acid-base equilibrium.

For example, if we have a strong acid and a weak base, the acid-base equilibrium will favor the side with the weaker acid and base. Conversely, if we have a weak acid and a strong base, the equilibrium will favor the side with the weaker acid and base.

Therefore, the strength of a weak acid and its conjugate base are inversely related, with the weaker acid having a stronger conjugate base.

The correct statement is " The element is more readily reduced than hydrogen." A hydrogen electrode is always attached to the rod of the element being investigated to obtain the electrode potential. It is called a standard hydrogen electrode, because the conditions are standard with pressure at 1 atm and the concentration of [tex]H^+[/tex] ions at 1M. A positive standard reduction potential means the element's electrode forms its metal ions less readily than hydrogen, which leads to the electrode being reduced by gaining electrons and the potential difference giving a positive value.

The answer is the third option which is A.

Please vote Brainliest if I am right. (:

Answer is: A.

1. Metallic bond is a type of chemical bond.  

2. Metallic bond is formed between electrons and positively charged metal ions.  

3. Metallic radius is defined as one-half of the distance between the two adjacent metal ions.  

4. Metallic bond increace electrical and thermal conductivity.  

5. Metals conduct heat, because when free moving electrons gain energy (heat) they vibrate more quickly and can move around.

Using the given free energy difference at 298 K and the equation ∆Gº = -RTlnK, we calculate the equilibrium constant (K) and determine that the most stable conformer of a substituted cyclohexane molecule comprises approximately 91.7% of the sample at equilibrium.

To determine what percent of the sample at equilibrium represents the most stable conformer of a substituted cyclohexane molecule, we use the free energy difference (
∆Gº) between the two chair conformations. Given that
∆Gº is 5.95 kJ/mol at 298 K, we first calculate the equilibrium constant (K) using the equation ∆Gº = -RTlnK, where R is the universal gas constant (8.314 J/mol•K) and T is the temperature in Kelvin. Substituting the known values, we have:

5.95 kJ/mol = - (8.314 J/mol•K)(298 K)lnK

Converting 5.95 kJ/mol to J/mol, we get 5950 J/mol. We then solve for K:

5950 J/mol = - (8.314 J/mol•K)(298 K)lnK

lnK = -5950 J/mol / (- (8.314 J/mol•K)(298 K))

lnK = 2.397

K = e^(2.397)

K ≈ 11.0

The ratio of the amounts of each conformer at equilibrium can be expressed as K = [Most Stable]/[Least Stable]. Hence, if the least stable conformer is taken as 1 part, the most stable will be 11 parts out of a total of 12 parts. The percent representation of the most stable conformer at equilibrium is then (11/12) * 100%, which approximates to 91.7%.

Therefore, the most stable conformer comprises approximately 91.7% of the sample at equilibrium.

The ionic compound CaO, composed of calcium and oxygen ions, is named calcium oxide. Calcium typically forms a Ca2+ ion and oxygen forms an O2- ion, resulting in a neutral compound. The naming process is straightforward for binary ionic compounds, using the metal's name and the nonmetal's name with an '-ide' suffix.

The ionic compound CaO is composed of calcium (Ca2+) and oxygen (O2-) ions. In naming ionic compounds, we typically use the name of the metal (calcium) followed by the name of the nonmetal with an '-ide' suffix. So the name of the ionic compound CaO is calcium oxide.

When forming ionic compounds, calcium, which is a group 2 element, will typically lose two electrons to form a Ca2+ ion. Oxygen, being in group 16, will typically gain two electrons to form an O2- ion. The positive and negative charges of these ions balance each other, resulting in a neutral compound.

The naming of other ionic compounds also follows this simple process when dealing with binary compounds – those containing only two elements. For example, Li2S would be named lithium sulfide, since it is composed of lithium ions and sulfide ions. When dealing with transition metals, which can have more than one ionic charge, roman numerals are used to indicate the charge of the metal, e.g., cobalt(III) oxide for Co2O3.

The correct answer is that the gas will occupy a volume of approximately 99.53 ml at standard temperature.

To solve this problem, we will use Charles's Law, which states that the volume of a gas is directly proportional to its temperature in Kelvin, provided the pressure remains constant. The formula for Charles's Law is:

[tex]\[ \frac{V_1}{T_1} = \frac{V_2}{T_2} \][/tex]

where [tex]\( V_1 \) and \( T_1 \)[/tex] are the initial volume and temperature of the gas, and [tex]\( V_2 \) and \( T_2 \)[/tex] are the final volume and temperature.

First, we need to convert the given temperatures from Celsius to Kelvin:

[tex]\[ T_1 = 32^\circ C + 273.15 = 305.15 \text{ K} \][/tex]

[tex]\[ T_2 = 0^\circ C + 273.15 = 273.15 \text{ K} \] (standard temperature)[/tex]

Now we can rearrange Charles's Law to solve for [tex]\( V_2 \):[/tex]

[tex]\[ V_2 = V_1 \times \frac{T_2}{T_1} \][/tex]

Substitute the known values into the equation:

[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15 \text{ K}}{305.15 \text{ K}} \][/tex]

[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15}{305.15} \][/tex]

[tex]\[ V_2 \approx 111 \text{ ml} \times 0.896 \][/tex]

[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]

However, we must note that the standard pressure is typically considered to be 1 atmosphere (atm), and since the problem does not specify a change in pressure, we assume that the pressure remains constant. Therefore, the final volume at standard temperature and pressure (STP) is:

[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]

But, to be more precise, we should consider that STP is defined as 0°C (273.15 K) and 1 atm, where the molar volume of an ideal gas is 22.414 liters per mole. Since we are not given the moles of gas or the pressure, we will assume that the pressure is 1 atm, and thus the volume will change only due to temperature.

Given that the initial volume is 111 ml, and we have already calculated the ratio of the temperatures, the final volume at STP is:

[tex]\[ V_2 = 111 \text{ ml} \times 0.896 \][/tex]

[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]

Rounding to two decimal places, we get:

[tex]\[ V_2 \approx 99.53 \text{ ml} \][/tex]

However, there seems to be a discrepancy between the initially stated answer of 95.66 ml and the calculated answer of 99.53 ml. To ensure accuracy, let's re-evaluate the calculation:

[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15 \text{ K}}{305.15 \text{ K}} \][/tex]

[tex]\[ V_2 \approx 111 \text{ ml} \times 0.896 \][/tex]

[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]

Answer:

I think planets....?

Explanation:

I'm not actually sure but my brother told me it's nebulae and I think he's lying... stars don't move and the moon wouldn't actually be a "point" even if it was it wouldn't be plural....

Using the ideal gas law, the number of moles, final pressure at peak temperature, burst likelihood, and reduced starting pressure before the desert ride can be calculated to ensure the mountain biker's tires do not burst.

To solve these problems involving a mountain biker's tire pressure in the desert, one would use the ideal gas law, which is PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature in Kelvin. Given this equation and the conditions provided, we can make some calculations.

How many moles of nitrogen gas are in each tire?

We are given the initial conditions: pressure (P) = 249 kPa, volume (V) = 15.6 L, and temperature (T) = 21°C. However, we need to convert these to SI units: P in Pa, V in m³, T in K. To calculate n, the number of moles of nitrogen gas in each tire, we rearrange the ideal gas law to n = PV/(RT).

What will the tire pressure be at the peak temperature in the desert?

To find the final pressure, we will assume the volume of the tires and the amount of nitrogen remain constant. We thus use the equation P₁/T₁ = P₂/T₂, where P₁ and T₁ are the initial pressure and temperature, and P₂ and T₂ are the final pressure and temperature.

Will the tires burst at the peak temperature?

By calculating P₂, we can determine whether the final pressure exceeds the burst pressure of 269 kPa.

To what pressure should the tire pressure be reduced before starting the ride to avoid bursting of the tires in the desert heat?

We need to work backwards using the ideal gas law to determine the reduced pressure that will not exceed 269 kPa when at peak temperature conditions.