calculate the average speed of a car of it traveled 180km in 2.0hr​

Answers

Answer 1

Answer:

1500m/s

Explanation:

d=180000

t=120

units have to be converted into SI Units

Average Speed = (Total distance)/(Total Time)

Average Speed= (180000)/(120)


Related Questions

a car is moving at 5.82 m/s when it accelerates 2.35m/s^2 for 3.25s. what is its final velocity?

Answers

Answer: 13.46 m/s

Explanation:

Initial velocity V1 = 5.82 m/s

acceleration A = 2.35m/s^2

Time taken T = 3.25s

Final velocity V2 = ?

Recall that acceleration is the rate of change of velocity per unit time i.e acceleration = (V2 - V1)/T

2.35m/s^2 = (V2 - 5.82 m/s) / 3.25s

cross multiply

2.35m/s^2 x 3.25s = (V2 - 5.82 m/s)

7.6375m/s = V2 - 5.82 m/s

V2 = 7.6375m/s + 5.82m/s

V2 = 13.46 m/s

Thus, the car final velocity is 13.46 m/s

Answer:

The final velocity is 13.5m/s

Explanation:

a = (v-u)/t

2.35 = (v-5.82) / 3.25

7.6375 = v - 5.82

v = 7.6375 + 5.82

v = 13.5 m/s

Elevation and the presence of features such as mountains and rivers make up an area’s

Answers

Answer:

valley

Explanation:

a valley is the space between two mountains and may comprise a river as well

In this diagram, the Moon is directly in front of the Earth. What would MOST LIKELY happen if the moon was not directly in front of the Earth? A) There would be a total solar eclipse. B) There would not be a solar eclipse. C) There would be a partial eclipse. D) There would be a lunar eclipse.

Answers

Answer: C There would be a partial eclipse.

Explanation:

Partial solar eclipses happen when the Moon comes between the Sun and Earth, but the Moon only partially covers the Sun's disk. When this occurs, the Moon, the Sun and Earth don't align in a perfectly straight line, and the Moon casts only the outer part of its shadow on Earth. This happens when only a portion of the Sun is blocked by the Moon. It occurs when the observer is within the penumbra.

Answer: C partial eclipse

Explanation:

got it right:)

Two charged particles are separated by a distance of .99m. If the charge on particle one is .00045C and the charge on particle two is .0000032C. What is the amount of force between them?

Answers

Answer:

The force between the two charges will be 13.22N.

Explanation:

The force between the two charges is given by Coulombs law which says

[tex]F = k\dfrac{Q_1Q_2}{R^2}.[/tex]

In our case

[tex]Q_1= 0.00045C[/tex],

[tex]Q_2 = 0.0000032C[/tex],

[tex]R = 0.99m[/tex].

therefore,

[tex]F = (9*10^9)\dfrac{(0.00045C)(0.0000032C)}{(0.99m)^2}.[/tex]

[tex]\boxed{F=13.22N}[/tex]

Hence, the force between the two charges will be 13.22N.

What is the speed of light in a vacuum

Answers

Answer:

299 792 458 m / s

Explanation:

299 792 458 m / s I can confirm that 299 792 458 m / s is the answer

88 kg fullback moving east with a speed of 5.0 m/s is tackled by a 97 kg opponent running west at
3.0 m/s, and the collision is perfectly inelastic. What is the speed of the players just after the tackle?
A) 149 m/s
B) 23.1 m/s
C) 7.31 m/s
D) 0.81 m/s​

Answers

I think it is b. 231 ms

The speed of the players just after the collision is (D) 0.81 m/s

Inelastic collision:

Given that the mass of the fullback is m = 88kg

mass of the opponent, M = 97 kg

speed of the fullback, u = 5 m/s

speed of the opponent, U = 3 m/s

In an inelastic collision, the two bodies move together at the same speed and the total momentum of the system remains conserved.

Let the final speed be v, then by conserving the momentum we get:

mu - MU = (m + M)v

Since the opponent must be moving in opposite direction to the fullback, therefore his momentum is -MU.

88×5 - 97×3 = (88 +97)v

149 = 185v

v = 0.81 m/s

So both the players move with a speed of 0.81 m/s

Learn more about inelastic collision: https://brainly.com/question/2356330?referrer=searchResults

Which of the following descriptions explains the process of water freezing? A) Water molecules speed up until they escape into a different phase. B) Water molecules slow down until they begin to bond together C) Water molecules are squeezed together by high pressure until they begin to stick to one another. D) As water molecules cool, their shape changes from rounded to irregular, making them more likely to link to one another.

Answers

Answer:

B

Explanation:

Answer: B. Water molecules slow down until they begin to bond together

Explanation:                                                                                                                                  When the water is to be cooled, the molecules start to slow down and becomes no longer energetic which means that they are going to bond together.

A 600kg car is at rest , and then accelerates to 5n/s what is the original kinetic energy?

Answers

m = 600 kg
u = 0 (as the car was at rest initially)
v = 5 m/s
Initial kinetic energy = ½mu²
= ½×600×0
= 0
Final kinetic energy = ½mv²
= ½×600×25
= 7500 J

Which of the following is an example of a pull? A. Doing pushups b. Playing catch with a baseball c. Walking up a staircase d. Reeling in a fish with a fishing pole

Answers

Answer:

D, reeling in a fish

Explanation:

Answer:the answer is D. Reeling in a fish with a fishing pole

Explanation:

you have to pull on the fish with the fishing pole in order to catch the fish

hope this helps

mark brainliest please

1. The experiment shown below is finished. What can you conclude from these results?

Daily water: 90 mL

Daily water: 50 ml

Daily water: 10 mL

Seed C

Seed C

Seed C

Sprouts: 16

Sprouts 12

Sprouts: 0

Heat: Medium (24 °C)

Heat: Medium (24 °C)

2

Heat: Medium (24 °C)

3

O A. Seed C germinates more with more light

O B. Seed C germinates more with less light.

O C. Seed C germinates more with more water.

OD Seed Caerminates more with less water.

Answers

Answer:

C. Seed C germinates more with more water.

Explanation:

In this experiment, the seed (seed C) was subjected to certain conditions and the result is what has been presented for us to make an inference.

We observe the following from the information given us:

I. the same seeds were used for the experiment

II. the same heat medium of 24 °C was used for all the seeds

III. different daily amount of water was supplied the seeds - 90 ml, 50 ml and 10 ml

From the experiment, we have this result:

the seed that was watered with 10 ml daily did not sprout anything, the seed that was watered with 50 ml daily yielded 12 sprouts while the seed that was watered with 90 ml daily yielded 16 sprouts

When we consider the amount of water given the seed & the produce of the seed, it is safe to conclude that with increase in daily water, there is increase in the number of sprouts by the seed

Hence, C. Seed C germinates more with more water is the correct answer

Final answer:

The given experiment shows that Seed C's germination is directly proportional to the amount of water it receives. More water results in more sprouts.

Explanation:

From the given experiment results, the conclusion can be drawn that Seed C germinates more with more water. This is evident as the seed sprouted 16 times with a daily water method of 90 mL, 12 times with 50 mL, and not at all with 10 mL. So, the amount of sprouts is directly proportional to the amount of water provided, the more the water, the more the sprouts. This supports the option that Seed C germinates more with more water. Also, the heat was kept constant to ensure that it doesn't affect the experiment results.

Learn more about Seed Germination here:

https://brainly.com/question/23561613

#SPJ3

Why is photosynthesis important to the biosphere? *
A. It produces oxygen for animals to breathe
B. It produces sugars for animals to eat
C. It gets rid of carbon dioxide
D. All of these
dont answer unless its the real answer please

Answers

Answer:

I picked all of these for a assignment I did.

Explanation:

please help i don’t get this

Answers

Answer:

i think it is with friction because when we move we go against friction so like when were walking friction is trying to decrease our speed

Explanation:

Which lenses are convex? Check all that apply. 1 2 3 4 5 6

Answers

Answer:

1,2,3,6

Explanation:

This is correct because i took the quiz and got it correct

1 2 3 and 6 are convex lenses.

What is convex lenses?The convex lens is a lens that converges rays of light that convey parallel to its principal axis (i.e. converges the incident rays towards the principal axis) which is relatively thick across the middle and thin at the lower and upper edges. The edges are curved outward rather than inward.

To learn more about The convex lens refer:https://brainly.com/question/26961264

#SPJ2

A _______ is a tool often used to measure the amount of force exerted by an object

Answers

Answer:

Force meter

Explanation:

Answer:

.o.o

Explanation:

678

How much work is done by gravity when a pine cone (of mass 50g) falls from the top of a tree, 9 m high?

Answers

Answer: 4.41 joules

Explanation:

Given that:

work is done by gravity = ?

Mass of pine cone (m) = 50g

Convert mass in grams to kilograms

Since 1000g = 1kg

50g = (50/1000) = 0.05kg

Height of tree (h) = 9 m

Apply the formula for work,

Work = mass x acceleration due to gravity x height

Acceleration due to gravity has a value of 9.8m/s^2

Work = mgh

Work = 0.05kg x 9.8ms^2 x 9m

Work = 4.41J

Thus, 4.41 joules of work is done by gravity.

Answer:

4.5 J

Explanation:

I took the test

29. If you traveled to Mars, your mass would be
than your mass on Earth. *

Answers

yes it would be the same your weight would change:)

If you traveled to Mars, your mass would be exactly, precisely equal to your mass on Earth, PROVIDED you did not relieve the boredom of space travel by eating too many astronaut steaks along the way.

The only things that can affect your mass are your personal diet, exercise, sleep, and stress habits.  

Your mass has nothing to do with gravity. Your WEIGHT has.

how many protons make an atom

Answers

Answer:

The atomic number is the number of protons in an atom of an element. In our example, krypton's atomic number is 36. This tells us that an atom of krypton has 36 protons in its nucleus.

Explanation:

Depends on what kind of atom it is. The number of protons can be seen in the periodic table as the atomic number. The number of proton within an atom is always equal to the number of electron.

Which of the following best explains why the tidal bulges on Earth are larger closest to the Moon compared to the tidal bulges closest to the Sun?

A) The Moon is closer to Earth than the Sun
B) The Moon has a greater mass than the Sun
C) The Sun has a greater mass than the Moon
Eliminate
D) The Sun is closer to Earth than the Moon

Answers

Answer:

C. because the moon is closer so it buldges or looks bigger

Explanation:

The iron ball is suspended from a box that floats in water.The box has a height of 5.00 cm, a face area of 10.0 cm​2​, and a density of 0.30 g/cm3, and 2.00cm of its height is above the water surface. What’s the radius of the ball?

Answers

Answer:

The iron ball is suspended from a box that floats in water. The box has a height of 5.00 cm, a face area of 10.0 cm ​ 2 ​ , and a density of 0.30 g/cm3, and 2.00 cm of its height is above the water surface. What’s the radius of the ball? Hints: ❏ Identify all forces acting on the box and write Newton’s second law. ❏ The box is stationary, which means the forces (including buoyant force) are balanced. You can use this to find tension in the rope. ❏ Identify all forces acting on the ball and write Newton’s second law. ❏ Iron ball is stationary, which means the forces (including buoyant force) are balanced.

Step by step:

HELP ASAP PLZZZZZZ

What is Chemical energy?
A)energy carried by light
B)energy of moving electrons
C)holds protons and neutrons together in the nucleus of an atom
D)holds the atoms in the molecule together

Answers

B because the electrons are moving to create a new form. Chemical energy is changing the form.


Hope this helps.

It takes 3 minutes to make toast in a 1500 watt toaster. Calculate how much work is done by the toaster.

Answers

Answer: 2.7 x 10^5 joules

Explanation:

Given that:

Time taken = 3 minutes

convert time in minutes to seconds

(Since 1 minute = 60 seconds

3 minutes = 3 x 60 = 180 seconds)

Power of toaster = 1500 watt

Work done by the toaster = ?

Recall that power is the rate of work done per unit time

i.e Power = work/time

work = Power x Time

Work = 1500 watt x 180 seconds

Work = 270000J

Place the result in standard form

270000J = 2.7 x 10^5J

Thus, 2.7 x 10^5 joules of work is done by the toaster.

Explain why the stars look different between Jane and John

Answers

To summarize, Jane's star has a red light and is traveling towards the earth while John's star star has a blue light and is traveling away from the earth. ... The stars look different because they are traveling in different directions.

what should i do if i'm stuck at home? Any thing except watching movies and going to sleep

Answers

card games

board games

bird watch

write a song

make a game

count stuff

throw a ball with someone

play outside

please help i need an explanation

Answers

Answer:

--

Explanation:

All potential and kinetic energy is transferred into heat. Therefore keeping the law of conservation of energy valid. No energy is created nor destroyed only changing shape.

how much energy is required to move a 4.00-microcoulomb charge through a potential difference of 36.0 volts?

Answers

Answer:

1.44 X 10^-4J

Explanation:

V=w/q =605/sc=12V

The energy required to move a 4.00-micro coulomb charge through a potential difference of 36.0 volts will be 1.44 X 10⁻⁴ J.

What is the electrical potential difference?

The amount of work performed in an electrical field to move a unit charge from one location to another is defined as the electrical potential difference.

The given data in the problem is;

W is the energy =?

q is the charge = 4.00-microcoulomb

V is the potential difference = 36.0 volts

The electric potential is the ratio of electric potential energy and charge.

[tex]\rm V= \frac{W}{q} \\\\\ W=Vq \\\\ W= 36.0 \times 4.00 \times 10^{-6} \\\\ W=144 \times 10^{-6} \\\\ W=1.44 \times 10^{-4}[/tex]

Hence the energy required will be 1.44 × 10⁻⁴ J.

To learn more about the electric potential difference refer to the link;

https://brainly.com/question/9383604

Define temperature using molecular theory

Answers

Answer: At the molecular level, temperature is related to the random motions of the particles (atoms and molecules) in matter. ... The temperature of the puddle, or of any object, is a measure of the average of the individual translational energies of all of its atoms or molecules.

Explanation: my science teacher already tought us this

Clearly, temperature has to do with the kinetic energy of the molecules, and if the molecules act like independent point masses, then we could define temperature in terms of the average translational kinetic energy of the molecules, the so-called "kinetic temperature".

Rank the nonmetals in each set from most reactive (1) to least reactive (3).

Bromine:

Chlorine:

Iodine:

Answers

Answer:

Bromine: 2 Chlorine: 1 Iodine: 3

Explanation:

hope this helps yall

Answer:

Bromine:

2

Chlorine:

1

Iodine:

3

Explanation:

Which of the following is a part of the digestive system

Answers

The Pancreas

Is an inflammation organ that lies in the lower part of the stomach which plays a big part in the digestive system.

Answer:

The hollow organs that make up the GI tract are the mouth, esophagus, stomach, small intestine, large intestine, and anus. The liver, pancreas, and gallbladder are the solid organs of the digestive system.

Have a good day! :D

Calculate the braking distance for a vehicle traveling at 30 mi/h (13.4 m/s) with an acceleration of - 9.0 (m/s)/s while breaking.

Answers

Answer:

Braking distance of vehicle is 9.97 m

Explanation:

It is given initial velocity of the vehicle u = 13.4 m/sec

Acceleration of the vehicle [tex]a=-9m/sec^2[/tex]

As the vehicle finally stops so final velocity of the vehicle v = 0 m/sec

We have to find the braking distance s

From third equation of motion

[tex]v^2=u^2+2as[/tex]

[tex]0^2=13.4^2+2\times -9\times s[/tex]

s = 9.97 m

So braking distance of the vehicle is 9.97 m

Help ASAP!!!!
If the hydroxide ion (OH-) concentration is greater than the hydronium ion (H3O+) concentration, then what is the solution?

A.
acidic

B.
basic

C.
neutral

D.
salty

Answers

If the hydroxide ion (OH-) concentration is greater than the hydronium ion (H3O+) concentration, then the nature of the solution would be basic, therefore the correct answer is option B.

What is a Chemical compound?

A chemical compound is a combination of two or more either similar or dissimilar chemical elements.

If the hydroxide ion (OH-) concentration is equal to the hydronium ion (H3O+) concentration then the nature of the solution would be neutral.

The correct response is option B because the nature of the solution would be basic if the concentration of hydroxide ions (OH-) is higher than that of hydronium ions (H3O+).

                         

To learn more about a chemical compound here, refer to the link;

brainly.com/question/12166462

#SPJ2

Other Questions
Maxtor Technology incurred the following costs during the year related to the creation of a new type of personal computer monitor: Salaries $ 280,000 Depreciation on R&D facilities and equipment 155,000 Utilities and other direct costs incurred for the R&D facilities 72,000 Patent filing and related legal costs 28,000 Payment to another company for performing a portion of the development work 150,000 Costs of adapting the new monitor for the specific needs of a customer 86,000 What amount should Maxtor report as research and development expense in its income statement? Which is a possible negative result of using renewable resources? A fitness center is planning to invest in a specialized exercise equipment. This equipment is highly effective, but the club members could be injured if the equipment is not used correctly. The fitness center sends its exercise instructors to a certified training program to learn how to use these machines correctly. This is best classified as: job/technical training. Please help!! List 2 advantages and disadvantages of each chart below worth 40 points! Which of the following is(are) the solution(s) to | X+10 | = 3x-2? What does the cartoonist send by portraying the Supreme Court justice as a Roman emperor? What is zero uniform velocity motion A ball is thrown vertically upward. After seconds, its height (in feet) is given by the function 56t - 16t^2 . What is the maximum height that the ball will reach? The management of Shatner Manufacturing Company is trying to decide whether to continue manufacturing a part or to buy it from an outside supplier. The part, called CISCO, is a component of the companys finished product. The following information was collected from the accounting records and production data for the year ending December 31, 2017. 1. 8,000 units of CISCO were produced in the Machining Department. 2. Variable manufacturing costs applicable to the production of each CISCO unit were: direct materials $5.00, direct labor $4.35, indirect labor $0.40, utilities $0.39. 3. Fixed manufacturing costs applicable to the production of CISCO were: Cost Item Direct Allocated Depreciation $1,900 $930 Property taxes 560 290 Insurance 950 590 $3,410 $1,810 All variable manufacturing and direct fixed costs will be eliminated if CISCO is purchased. Allocated costs will have to be absorbed by other production departments. 4. The lowest quotation for 8,000 CISCO units from a supplier is $81,590. 5. If CISCO units are purchased, freight and inspection costs would be $0.34 per unit, and receiving costs totaling $1,290 per year would be incurred by the Machining Department.(a) Prepare an incremental analysis for CISCO. Your analysis should have columns for 1. Make CISCO, 2. Buy CISCO, and 3. Net Income Increase/(Decrease). (b) Based on your analysis, what decision should management make? (c) Would the decision be different if Shatner Company has the opportunity to produce $3,000 of net income with the facilities currently being used to manufacture CISCO? Show computations. (d) What nonfinancial factors should management consider in making its decision? A plant takes in carbon dioxide (CO2) from the atmosphere and uses it to make glucose (C6H12O6) through photosynthesis. Later a deer eats the leaves of the plant obtaining the plants glucose. After respiration, the deer exhales carbon dioxide (CO2) back into the atmosphere. This is an example of _________________. All of the following proportions are equivalent exceptb/a=d/ca/b=cida/c=b/da/d=c/b Write the order pair that represents YZ. Then find the magnitude of YZ. Y(5,4), Z (0,-3) Which do you think is most important about sleep? Write 2-3 sentences to explain Light striking a metal plate can eject electrons from the plate's surface (this is called the photoelectric effect). Imagine that we place the plate in a vacuum and set up an electric field in the plate's vicinity that is uniform in magnitude and direction such that the electric field vector E at any point near the plate has a magnitude of 1000 N/C and points directly away from the plate, perpendicular to its surface. Electrons ejected by the photoelectric effect will have initial kinetic energies of no more than about 3 eV, where 1 eV = 1.6 x 10^-19 J. Roughly estimate the maximum distance that an ejected electron can get from the plate under these circumstances. (Hint: Consider an analogy to the behavoir of a thrown ball in a uniform gravitational field.) Glaciers act as ___ in the water cycle, because they can store water for a long period of time In addition to paying $100 per month for health insurance, sam is responsible for paying her first $500 of medical bills every year before her insurance covers and cost. The $500 sam must pay is called the: 13. Qu no haces normalmente en tus vacaciones?O bucearO tomar el solmontar a caballotrabajar what is the range for this set of data 38,17,55,40a)2B)38C)39D)72 plz help me plz hurry What is the solution to the system of equations?7 x minus 2 y = negative 24. 5 x + 5 y = 15. Compute the following probabilities: If Y is distributed N(1, 4), find Pr ( Y 3 ) . If Y is distributed N(3, 9), find Pr ( Y > 0 ) . If Y is distributed N(50, 25), find Pr ( 40 Y 52 ) . If Y is distributed N(5, 2), find Pr ( 6 Y 8 ) .