Can someone please tell me how to solve these question below.

16. A man stands on top of a 25 m tall cliff. The man throws a rock upwards at a 25 degree angle above the horizontal with an initial velocity of 7.2 m/s. What will be the vertical position of the rock at t = 2 seconds? What will be the horizontal position of the rock at that time?

Answers

Answer 1

Answer:

Vertical position of the rock after 2 seconds = 11.46 m

Horizontal position of the rock after 2 seconds = 13.06 m

Explanation:

Initial height = 25 m

Angle of throw = 25 degrees

Velocity of throw = 7.2 m/s

Horizontal velocity of throw = 7.2 cos 25 = 6.53 m/s

Vertical velocity of throw = 7.2 sin 25 = 3.04 m/s

Acceleration in horizontal direction = 0 m/s²

Acceleration in vertical direction = -9.8 m/s²

Vertical position of the rock at t = 2 seconds

We have equation of motion s = ut + 0.5at²

                                     s = 3.04 x 2 - 0.5 x 9.81 x 2²

                                     s = -13.54 m

Vertical position = 25 - 13.54 = 11.46 m

Horizontal position of the rock at t = 2 seconds

We have equation of motion s = ut + 0.5at²

                                     s = 6.53 x 2 + 0.5 x 0 x 2²

                                     s = 13.06 m

Horizontal position = 13.06 m

Vertical position of the rock after 2 seconds = 11.46 m

Horizontal position of the rock after 2 seconds = 13.06 m


Related Questions

When a chemical reaction occurs,
A.) reactants interact to form products with different chemical and physical properties

B.) reactants interact to form products with different numbers of atoms

C.) products react to form several reactants with different chemical properties

Answers

A) reactants interact to form products with different chemical and physical properties

The masses of two metal blocks are measured. Block A has a mass of 8.45 g and Block B has a mass of 45.87 g. How many significant digits are expressed in these measurements? What is the total mass of block A plus block B? What is the number of significant digits for the total mass?

Answers

Answer:

3 sig figs total mass is 54.32g

Explanation:

It is 3 sig figs because that is the accuracy that Block A was measured to

An object's motion changes
A.
only when a nonzero net force is applied to the object.
B.
only if the object is at rest when a force acts upon it.
C.
when the forces acting on the object remain balanced.
D.
when there are no forces acting upon it.

Answers

Answer:A.

only when a nonzero net force is applied to the object.

Explanation:

Answer:

he is right its A

Explanation:

A 210-kg woorden raft floats on a lake. When a 75-kg man stands on the raft, it sinks 5.0 cm deeper into the water. When he steps off, the raft vibraties for a while. A. What is the frequency of vibration? B. What is the total energy of vibration? Hint: ignore damping.

Answers

Answer:

A: The frequency of the vibration is 1.3329 Hz

B: The total energy of the vibration is  18.39375 J

Explanation:

The force of the man his weight causes the raft to sink, and that causes the water to put a larger upward force on the raft.  This extra force is a restoring force, because it is in the opposite direction of the force put on the raft by the man.  Then when the man steps off, the restoring force pushes upward on the raft, and thus the raft – water system acts like a spring, with a spring constant found as follows:

k= F/x = ((75 kg) * (9.81 m/s²))/(5*10^-2 m) = 14715 N/m

The frequency of the vibration is determined by the spring constant (k) and the mass of the raft (210kg).

fn = 1/2π * √(k/m)  = 1/2π * √(14715 / 210) = 1.3329 Hz

The frequency of the vibration is 1.3329 Hz

b)

Since the gravitational potential energy can be ignored, the total energy will be :

Etot = 1/2 k* A² = 1/2 * (14715 )*(0.05)² = 18.39375 J

The total energy of the vibration is  18.39375 J

A scientific hypothesis starts with the lowest level of acceptance but can become stronger as they are used and survive repeated testing.

1)True
2)False

Answers

Answer:

True.

Explanation:

Hypotheses are supposed to be tested, to be proven correct. They usually start from a small thought without 100% correct, but as you do further testing, they become stronger.

Answer: 1)True

Explanation:

A scientific hypothesis is a statement which is based on the the direct observation of a scientific event, process or phenomena. It can be based on the assumptions. It is testified using appropriate scientific methodology.

The scientific hypothesis can be proved to be negative or false but repeated experimental trials can prove a hypothesis true and acceptable.  

Which of the following statements has NOT been indicated by research on food and hunger behaviors?
A) Forcing children to eat specific foods often has a negative effect on food preference.
B) People usually consume larger amounts of food in social settings.
C) Stress may cause people to decrease their craving for carbohydrates.
D) Children are more likely to eat certain foods after seeing a parent eat them

Answers

The statements have not been indicated by research on food and hunger behaviors is stress may cause people to decrease their craving for carbohydrates. Therefore, option C is correct.

What are carbohydrates ?

Carbohydrates are organic compounds that provide energy to living cells. They are carbon, hydrogen, and oxygen compounds with a hydrogen-to-oxygen ratio of two. Carbohydrates, which we consume, are derived from plant photosynthesis.

They are composed of carbon, hydrogen, and oxygen and are primarily used for energy by living things. Sugars are simple carbohydrates, such as glucose, that living situations' cells use for energy.

The statements have not been indicated by research on food and hunger behaviors is stress may cause people to decrease their craving for carbohydrates.

Thus, option C is correct.

To learn more about the carbohydrates, follow the link;

https://brainly.com/question/14614055

#SPJ5

The correct answer is C) Stress may cause people to decrease their craving for carbohydrates, as research shows stress often increases cravings for comfort foods high in sugar and fat.

Research on food and hunger behaviors has indicated several facts about how we eat and what influences our eating habits. Let's examine each statement one by one:

A) Forcing children to eat specific foods often has a negative effect on food preference: This is supported by research showing that pressuring children to eat specific foods can lead to aversions rather than preferences.B) People usually consume larger amounts of food in social settings: Studies indicate that social settings encourage increased food consumption due to various social cues and norms.C) Stress may cause people to decrease their craving for carbohydrates: This statement is NOT supported by research. In fact, research indicates that stress often leads to increased cravings for carbohydrates, as people tend to seek comfort foods that are high in sugar and fat to alleviate stress.D) Children are more likely to eat certain foods after seeing a parent eat them: Observational learning plays a significant role in children's eating behaviors, so this statement is consistent with research findings.

Therefore, the correct answer is C) Stress may cause people to decrease their craving for carbohydrates.

Which factors are used to calculate the kinetic energy of an object? Check all that apply. gravity velocity volume mass height

Answers

Quantities that determine the kinetic energy of a body are its mass and velocity

Answer:  mass and velocity

Explanation:

The kinetic energy of a body is the energy possessed by an object by virtue of its motion. It is given by the equation

                                       [tex]k= \frac{1}{2}mv^2[/tex]

Where m represents mass of the body and v represents its velocity.

Two bodies of equal velocity but different mass the heavier body will have greater kinetic energy. When an object is at rest its velocity is equal to zero. Thus its kinetic energy will be zero. Hence it can be concluded that only moving bodies have kinetic energy.

Stationary objects placed at a height possess potential energy which is the energy by virtue of their position or configuration. The total mechanical energy of a system is the sum of potential and kinetic energy.

1. Answer true or false to the following:
A ball rolling on a flat table has a horizontal but no vertical
component of motion.
A rock falling straight downward with no wind blowing has no
horizontal component of motion.
A baseball hit into the air toward right field has vertical but no
horizontal component of motion.
A basketball bounced straight up and down has vertical but no
horizontal component of motion.

Answers

Ball -- true

Rock -- true

Baseball -- False

Basketball -- true

All the statements are true except the third statement related to baseball hit into the air toward right field has vertical but no horizontal component of motion.

True- A ball rolling on a flat table has a horizontal but no vertical component of motion.

True- A rock falling straight downward with no wind blowing has no horizontal component of motion.

False- A baseball hit into the air toward right field has vertical but no horizontal component of motion.

True- A basketball bounced straight up and down has vertical but no horizontal component of motion.

Answer: Option true 1, 2, 4, and false 3

Explanation:

For the first statement of ball rolling on a flat table, as the table was flat, the acceleration due to gravity may not be acting on the ball kept on the table. When external push is given on the ball kept on the flat table, the ball will be moving along the direction of the push and not perpendicular to the direction of push.

So, the statement 1 is true. Similarly, the motion of rock as well as basketball in a straight up and down direction exhibit only the vertical component as both of them will be moving due to acceleration due to gravity.

So, the second and last statement is also true. But in case of baseball hitting the air toward right field means the ball is made to hit at a particular angle. So as the baseball will follow a path of parabola it will have only horizontal component of motion and not vertical component of motion. So the third statement is false.

An atom has 18 protons, 18 electrons, and 20 neutrons.
This atom has ?

a negative charge

an atomic number of 20

a mass number of 38

a positive charge

Answers

Answer:

mass number of 38

Explanation:

Charge is 0 - No. of protons is equal to nom.of electrons, so no charge

Atomic number is 18 - Atomic number is number of protons

Mass number is 38- mass number is number of protons AND neutrons

Answer:

a mass number of 38

Explanation:

X This atom has no a negative charge .

because, number of  protons (18) & electrons (18) are same. so,This atom is neutral.

X This atom has an atomic number of 20.

Because, it has 18 protons. so, This atom has an atomic number of 18.

X  This atom has a positive charge

because, number of  protons (18) & electrons (18) are same.so,This atom is neutral.

which would be an example of biopsychology

Answers

Answer:

It is just how your body works, like how your nervous system works. In other words, it is your structure and fuctions of cells in your body of the nervous system.

Hope this helps!

Answer:

a psychiatrist prescribes medication for depression

Explanation:

i just had this question and it was correct

9. If a rocket flies north 390 meters in 6 seconds, what is its velocity?

Answers

Answer:

65 m/s north

Explanation:

The velocity of an object is given by:

[tex]v=\frac{d}{t}[/tex]

where

d is the displacement of the object

t is the time interval needed for the displacement

For the rocket in this problem,

d = 390 m north

t = 6 s

So the velocity is

[tex]v=\frac{390}{6}=65 m/s[/tex] north

It is important to keep in mind that velocity is a vector, so it both has a magnitude (65 m/s) and a direction (which is equivalent to that of the displacement, so in this case north).

A basketball rolls onto the court with a speed of
4
.
0
m
s
4.0
s
m
​ 4, point, 0, space, start fraction, m, divided by, s, end fraction to the right, and slows down with a constant acceleration of
0
.
5
0
m
s
2
0.50
s
2

m
​ 0, point, 50, space, start fraction, m, divided by, s, start superscript, 2, end superscript, end fraction over
1
4
m
14m14, space, m.
What is the velocity of the basketball after rolling for
1
4
m
14m14, space, m?

Answers

Answer:

5.48 m/s

Explanation:

We can find the final velocity of the basketball by using the SUVAT equation:

[tex]v^2 - u^2 = 2ad[/tex]

where

v is the final velocity

u = 4.0 m/s is the initial velocity

[tex]a=0.50 m/s^2[/tex] is the acceleration

d = 14 m is the distance covered

Solving the equation for v, we find:

[tex]v=\sqrt{u^2 +2ad}=\sqrt{4.0^2+2(0.50)(14)}=5.48 m/s[/tex]

A bike that is coasting down a steep hill increases its speed from 8.0 m/s to 14 m/s. The length of the hill is 55 meters. How much time passes during the descent?

Answers

t=5s

it was correct on my do-now

so I hope it was useful for you

Answer:

Time, t = 5 seconds          

Explanation:

It is given that,

Initial speed of the bike, u = 8 m/s

Final speed of the bike, v = 14 m/s

Length of the hill, d = 55 m

Firstly, we can find the acceleration of the bike. Let it is equal to a. It can be calculated using third equation of motion as :

[tex]a=\dfrac{v^2-u^2}{2d}[/tex]

[tex]a=\dfrac{(14)^2-(8)^2}{2\times 55}[/tex]  

[tex]a=1.2\ m/s^2[/tex]

Let t is the time passes during the descent. It can be calculated using the first equation of motion as :

[tex]t=\dfrac{v-u}{a}[/tex]

[tex]t=\dfrac{14-8}{1.2}[/tex]      

t = 5 seconds

So, the time passes during the descent is 5 seconds. Hence, this is the required solution.                                                      

An oxidation reaction is a reaction between ______________& ___________.

A. Water and oxygen.
B. Oxygen and an oxyacid.
C. Metal and an oxyacid.
D. Metal and oxygen

Answers

It's A, because oxidation is a chemical reaction between water and air. If it's wrong I'm sorry

Answer:

Oxygen and an oxyacid.

Explanation:

Water doesn't have much to do with oxidation, and things other than metal oxidize. Through the process of elimination and taking a chemistry class, I can say the answer is most likely B.

What is the importance of vectors quantities and how they help engineers, pilots, navigators and geographer

Answers

Answer:

Scalar and vector quantities are used by the mathematicians, geographers and engineers to relate and represent the physical variables in terms of magnitude and direction. The quantity which has both magnitude and direction is called as vectors.  Scientists in space station also use them for navigation or when they are launching or exploding a material to define its direction which makes easier for them to navigate. There are many types pf vectors depending upon its property they are used in various applications.

You throw a ball upward with a speed of 14 m/s. What is the acceleration of the ball after it leaves your hand?

Answers

Answer:

g = -9.8 m/s²

Explanation:

Gravity is the only force pulling on any object in free fall. Gravity near earth's surface pulls with an acceleration g.

The acceleration of the ball is -9.8 meter per sec square acting as deceleration when the ball left the hand after being thrown upwards.  

Explanation:

The ball is thrown with a speed of 14 m/s and the moment it comes into the projectile, gravity starts to work on it. The gravity applies the uniform acceleration of 9.8 m/s^2.

This acceleration is in the form of deceleration [the negative acceleration] is termed as the deceleration. And here, the ball is thrown opposite to the gravity and hence the motion is against the gravity, the acceleration becomes -9.8 m/s^2.

8. If a car is going 10 m/s and 4 seconds later it is going 18 m/s, what is its acceleration!​

Answers

Answer:

2 m/s²

Explanation:

Acceleration is change in velocity over change in time.

a = Δv / Δt

a = (18 m/s − 10 m/s) / 4 s

a = 2 m/s²

The acceleration of a car going 10 m/s and 4 seconds later it is going 18 m/s is 2m/s².

HOW TO CALCULATE ACCELERATION:

The acceleration of a moving body can be calculated using the following formula:

a = (v - u)/t

Where;

a = acceleration (m/s²)v = final velocity (m/s)u = initial velocity (m/s)t = time (seconds)

According to this question, a car is going 10 m/s and 4 seconds later it is going 18 m/s. The acceleration can be calculated as follows:

a = (18m/s - 10m/s)/4

a = 8/4

a = 2m/s²

Therefore, the acceleration of a car going 10 m/s and 4 seconds later it is going 18 m/s is 2m/s².

Learn more about calculating acceleration at: https://brainly.com/question/19573976?referrer=searchResults

scientific notation for 7890

Answers

7.89•10 to the third power

A rock is dropped from the edge of a cliff 15.0 m high. How long does it take to reach the bottom of the cliff?

Answers

Answer:

1.75 s

Explanation:

The vertical position of the rock at time t is given by:

[tex]y(t) = h +ut - \frac{1}{2}gt^2[/tex]

where

h = 15.0 m is the initial height

u = 0 is the initial velocity

g = 9.8 m/s^2 is the acceleration of gravity

t is the time

When the rock reaches the bottom of the cliff,

y(t) = 0

Substituting this condition into the previous equation, we can find the time at which the rock reaches the bottom of the cliff:

[tex]0 = h - \frac{1}{2}gt^2\\t= \sqrt{\frac{2h}{g}}=\sqrt{\frac{2(15.0)}{9.8}}=1.75 s[/tex]

Liam and Melinda have completed one trial testing the freezing point of several solutions, but they cannot agree on what to do next in their experiment. What should be the next step in their investigation? A. repetition, completing more trials for each solution B. analysis, determining whether their data and precise and accurate C. further investigation, testing new solutions and comparing them to their original data D. replication, asking about their classmates’ findings to compare data

Answers

Answer:

A. repetition, completing more trials for each solution

Explanation:

In this experiment, the two differ in results that is why they ca not agree on the next step.This happens when experimental results do not confirm the hypothesis of the experiment.In such cases, you are required to assess the stages in the experiment which are- the hypothesis, the experimental stages,the analysis stage and the result stage.The key here is to go through the write up of the experiment to see the problems that cause the variations in results.

In this case where they were testing the freezing points of several solutions, there are four cognitive properties of a solution that affects the solvent. They are lowering of vapor pressure, lowering of freezing point, rise in boiling point or initiation of an osmotic pressure in the process.When they perform more trials for each solution, they will see if they carried out the experiment correctly.

Answer:

A. Repetition, completing more trials for each solution

Explanation:

Just got it right on Edg :)

What must you do to calculate a meaningful value of distance from the following equation?
d= (0.90km) + (12.5km)/h x (31.5s)
-Convert the kilometers to meters.
-Convert the kilometers to miles.
-Drop the symbols for the units.
-Convert all the times to either hours or seconds.

Answers

Answer:

Convert all the times to either hours or seconds

Explanation:

One time unit is in hours, and the other is in seconds.  In order to do the math, the units need to be the same.  So you either need to convert hours to seconds, or seconds to hours.

Answer:

-Convert all the times to either hours or seconds.

Explanation:

Given,

[tex]d= (0.90km) + (12.5km/h) \times (31.5s)[/tex]

While doing a mathematical calculation all the units should be same otherwise the result will not be correct. Here two units of time i.e. second and hour are being used. We will convert the second to hour by dividing it by 3600 as there are 3600 seconds in one hour. The distance will be,

[tex]d= (0.90km) + (12.5km/h) \times (\frac{31.5}{3600}h)[/tex]

[tex]d= 0.90 + 12.5 \times \frac{31.5}{3600}[/tex]

[tex]d= 0.90 + \frac{393.75}{3600}[/tex]

[tex]d= 0.90 + 0.109[/tex]

[tex]d= 1.009 km[/tex]

L
2.1.2 Quiz: Physical Fitness
Question 2 of 10
3 Points
A healthy body weight is associated with a low BMI.
O A. True
OB. False

Answers

We can confirm that the statement made in the question is in fact true, a healthy body weight is associated with a low BMI.

Why is a low BMI healthy?

BMI is the acronym for "Body Mass Index". This is a measurement that indicates the fat contents of the body of the individual being measured. A low BMI is associated with healthy body weight as it indicated low levels of fat. Anything below 25% is considered to be acceptable, while anything below 15% is considered to be fit/athletic.

Therefore, we can confirm that this statement is in fact true, as a low BMI indicates low fat levels and therefore is associated with healthy body weight.

To learn more about fitness visit:

https://brainly.com/question/4904267?referrer=searchResults

#SPJ1

Final answer:

The statement associating a low BMI with a healthy body weight is false. A healthy body weight, as indicated by BMI, falls within the 18-24.9 range. However, BMI is an imperfect measure and can be misleading due to its disregard for muscle mass, fat distribution, and bone density.

Explanation:

The statement that a healthy body weight is associated with a low body mass index (BMI) is False. A healthy body weight, as indicated by BMI, falls within a range. A BMI ranging from 18-24.9 is considered normal weight, 25-29.9 is considered overweight, and a BMI greater than 30 is considered obese. However, BMI has its limitations. It does not account for muscle mass, fat distribution, or bone density, which can lead to inaccuracies in determining actual health status. A muscular person may have a high BMI but low body fat, while an individual with less muscle mass might have a lower BMI but higher body fat percentage.

A baseball is popped straight up into the air and has a hang-time of 6.25 S.
Determine the height to which the ball rises before it reaches its peak. (Hint: the
time to rise to the peak is one-half the total hang-time.)

Answers

Answer:

47.9 m

Explanation:

Given:

y₀ = 0 m

t = 6.25/2 = 3.125 s

v = 0 m/s

a = -9.8 m/s²

Find: y

y = y₀ + vt − ½ at²

y = 0 + (0)(3.125) − ½ (-9.8)(3.125)²

y = 47.9 m

We have that for the Question "A baseball is popped straight up into the air and has a hang-time of 6.25 S.

Determine the height to which the ball rises before it reaches its peak. (Hint: the  time to rise to the peak is one-half the total hang-time.)" it can be said that Hence, the height to which the ball rises before it reaches its peak is

S=47.85m

From the question we are told

A baseball is popped straight up into the air and has a hang-time of 6.25 S.

Determine the height to which the ball rises before it reaches its peak. (Hint: the  time to rise to the peak is one-half the total hang-time.)

Generally the Newtons equation for the distance   is mathematically given as

[tex]s=ut+1/2at^2\\\\\ Where \\\\T=\frac{6.25}{2}\\\\T=3.125\\\\[/tex]

Therefore

[tex]s=0+1/2(9.8)(3.125)^2[/tex]

S=47.85m

Hence, the height to which the ball rises before it reaches its peak is

S=47.85m

For more information on this visit

https://brainly.com/question/23379286

The tallest sequoia sempervirens tree in California’s redwood national parks is 111 m tall. Suppose an object is thrown downward from the top of that tree with a certain initial velocity. If the object reaches the ground in 3.80 s, what is the objects initial velocity?

Answers

The object's initial velocity is equal to [tex]-10.59\frac{m}{s}[/tex]

Why?

From the statement we know the height of the tree and the time it takes to reach the ground, so, if we need to calculate its initial velocity, we can use the following formula:

[tex]y=y_o-v_{o}*t-\frac{1}{2}g*t^{2}[/tex]

Where,

y, is the final height (0 meters in this case)

yo, is the initial height (111 meters in this case)

t, is the time elapsed (3.8 seconds in this case)

vo, is the initial speed.

g, is the acceleration due to gravity (-9.81 m/s2)

Now, let's set the origin at the top of the tree, so, rewriting the formula, we have:

[tex]y=y_o+v_{o}*t+\frac{1}{2}g*t^{2}[/tex]

So, isolating the initial velocity, we have:

[tex]y=y_o+v_{o}*t+\frac{1}{2}g*t^{2}[/tex]

[tex]y=y_o+v_{o}*t+\frac{1}{2}g*t^{2}\\\\v_{o}*t=y-y_o-\frac{1}{2}g*t^{2}\\\\v_{o}=\frac{y-y_o-\frac{1}{2}g*t^{2}}{t}[/tex]

Finally, substituting and calculating, we have:

[tex]v_{o}=\frac{-111m-0-\frac{1}{2}(-9.8\frac{m}{s^{2}}) *(3.8s)^{2})}{3.8s}\\\\v_{o}=\frac{-111m-\frac{1}{2}(-9.8\frac{m}{s^{2}})*(14.44s^{2})}{3.8s}\\\\v_{o}=\frac{-111m-\frac{1}{2}(-141.51m)}{3.8s}=\frac{-111m+70.75m}{3.8s}\\\\v_{o}=\frac{-40.25m}{3.8s}=-10.59\frac{m}{s}[/tex]

Hence, we have that the initial velocity of the object is [tex]-10.59\frac{m}{s}[/tex]

Have a nice day!

Stephanie is riding her bicycle to the park. The chemical energy used to pedal the bicycle is transformed into __________.

Answers

Answer:

MECHANICAL ENERGY

Explanation:

when you use mechanical energy you are use kinetic energy and potential energy at the same time.

When pedaling the bike is transforming chemical energy, supplied by the breakdown of the food you eat, into mechanical energy to turn the pedals. The chemical energy is potential and the mechanical energy is kinetic

which compound is composed of oppositely charged ions

Answers

I believe your answer is Ionic solids.

calculate the speed of the wave with the frequency of 10khz and wavelength of 2m​

Answers

speed = wavelength × frequency

but the frequency was given to as

10khz ,

which means

[tex] {10}^{3} [/tex]

= 1000

so now frequency = 1000hz

substitute it into the equation

speed = 1000×2

speed = 2000ms^-1

Final answer:

The speed of the wave with the frequency of 10 kHz and a wavelength of 2 meters is 20,000 meters per second, or 20 km/s.

Explanation:

To calculate the speed of a wave, we can use this simple physics formula: speed = frequency × wavelength. In this case, the frequency of the wave is 10 kHz (or 10,000 Hz) and wavelength is 2 meters. Knowing these values, we can substitute them into the formula.

Speed = 10,000 Hz × 2 meters

Therefore, the speed of the wave is 20,000 meters per second, or 20 km/s.

The speed of the wave with the frequency of 10 kHz and a wavelength of 2 meters is 20,000 meters per second, or 20 km/s.

Learn more about Speed of Wave here:

https://brainly.com/question/32040742

#SPJ3

Earth’s gravity keeps the moon in orbit by pulling on it.


What does the moon’s gravity do?


A. pulls back on the Earth

B. can only pull on smaller objects such as asteroids but has no effect on the Earth

C. doesn´t affect anything

D. pushes the moon away from the Earth

Answers

Answer:

A. pulls back on the Earth, which is the main cause of the rise and fall of the ocean tides on Earth.

The moon’s gravity pulls back on the Earth. Therefore, option (A) is correct.

What is the moon's gravity?

The Moon's gravity can be described as the acceleration due to gravity on the surface of the Moon. The value of g on the Moon can be calculated by considering the mass of the Moon and earth.

The mass of the Moon is equal to 7.342 x 10²² kg which is 1.2% of the mass of the earth and the radius of the Moon = 1.74 x 10⁶ m

Since the formula to calculate the value of g = GM/r2

The value of the g for the Moon is equal to 1.652 m/s² which is 16.7 % of the gravity of the earth.

The moon's gravity on the Earth is the reason for the rise and fall of ocean tides. The moon's gravitational pull arises two bulges of water on the oceans of the earth in which one where ocean waters face the moon and the pull is strongest and another where ocean waters face away from the moon and the pull is weakest.

Therefore, the gravity of the moon pulling back on the Earth is the correct option.

Learn more about the gravity of the moon, here:

https://brainly.com/question/23349679

#SPJ2

Which environmental change would most likely result in bullfrog offspring that are able to store more water than bullfrogs in previous generations?

Answers

Answer:

a drought

Explanation:

bullfrogs would only need to store more water if they would go longer periods of time without it - think about how cacti store all the water they can in desert, since there is not a lot of water there.

A car in motion has kinetic energy. What happens to the kinetic energy when the car brakes to a stop? The kinetic energy is transformed into potential energy ready to be released when the car starts back up. The kinetic energy is lost since energy is not conserved. The kinetic energy is transformed into heat energy evident by the warmth of the tires and is dissipated. The kinetic energy is still there, it is just not observable.

Answers

Final answer:

When a car brakes to a stop, its kinetic energy is transformed primarily into thermal energy due to friction. The brakes and tires may become warm as a result of this energy conversion. Energy is neither lost nor does it become unobservable potential energy; it simply changes form in accordance with the law of conservation of energy.

Explanation:

When a car brakes to a stop, its kinetic energy is transformed into other forms of energy. This is a fundamental concept in physics related to the conservation of energy, which tells us that energy cannot be created or destroyed, only transformed from one form to another. In the case of a car stopping, the kinetic energy is mostly converted into thermal energy due to the friction between the car's brakes and wheels. This energy transfer can cause the brakes and tires to warm up, and it is why they may feel hot after use. Additionally, some of the energy may be transferred to the surroundings as the car interacts with the air, causing air movement and sound.

The explanation that kinetic energy is transformed into potential energy to be used later is incorrect. Potential energy is related to an object's position in a gravitational field, not its motion. Thus, when the car stops, its kinetic energy does not become potential energy. Similarly, saying that the kinetic energy is still there but not observable is also incorrect, as the kinetic energy has been converted into other forms. The idea that kinetic energy is lost and not conserved is also a misconception because energy conservation is a fundamental law of physics.

Final answer:

When a car brakes to a stop, the kinetic energy is transformed into heat energy through friction.

Explanation:

When a car brakes to a stop, the kinetic energy of the car is transformed into heat energy. The brakes use friction to reduce the car's speed, and as a result, the kinetic energy is converted into heat energy. This can be observed by the warmth of the tires and the fact that the brakes can become very hot after coming to a stop.

Other Questions
Which of the following describes the growth curve? A 0.1153-gram sample of a pure hydrocarbon was burned in a C-H combustion train to produce 0.3986 gram of CO2and 0.0578 gram of H2O. Determine the masses of C and H in the sample and the percentages of these elements in this hydrocarbon. In which situation is the person applying critical thinking skills?OA. Nathan shut down his computer before leaving work for the day.OB. Cara filled out her timecard completely and accurately.C. John realized that if he created a template to fill out his weeklyprogress report, it would save him 15 minutes each week.D. DeAndre copy and pasted his report into a new file upon requestfrom his manager. A researcher wondered whether drivers treat bicycle riders differently when they wear helmets. He rigged his bicycle with an ultrasonic sensor that could measure how close each car was that passed him. He then rode on alternating days with and without a helmet. Of the 30003000 times that a car passed him, he found that when he wore his helmet, motorists passed 3.273.27 inches closer to him, on average, than when his head was bare. What is the WhoWho in this study? That is, identify the cases under study. A. The bike riders B. Each instance of a car passing a rider C. Bike helmets D. The cars You are consulting a company that manufactures cell phones. Currently, the company manufactures all portions of the cell phone internally for $22 per unit ($6.85 of direct materials, $11.74 of direct labor, and $3.41 of fixed manufacturing overhead). However, the company is considered outsourcing one part of the phone, its circuit board, to an outside supplier. The supplier quoted a price of $4.50 per circuit board. If the company accepts the supplier's offer, it is estimated that the total direct materials costs would be reduced by 20% and total direct labor costs would be reduced by 15%. a)If the company decides to outsource the circuit board, the total cost of the cell phone is $ per unit. (Round to the nearest cent.)(Show calculations) b)Should the company you are consulting accept the outside supplier's offer? why or why not? c)The maximum price per circuit board that the company should be willing to pay the outside supplier is $ (Round to the nearest cent.)(Show calculations) Is it a or d? B and c dont make sense to me Linear Algebra QuestionThe general equation for a circle isa(x2+y2)+bx+cy+d=0.There is exactly one circle passing through the points (2,3),(3,2), and (0,0). Find an equation for this circle. At camp, there are 12campers and 2 counselorsin each cabin. What is theratio of campers to totalpeople in the cabin? The Defense Acquisition Management System (DAMS) process for major acquisition programs begins with identification through the ""DOTMLPF"" Analysis of a capability need requiring a _________________. A frequency polygon having a peak in the center of its distribution is:symmetricskewedkurtosisa histogramWhich of the following is a true statement regarding the mode?The mean, median, and mode may be the same value.The mode is equal to the second quartile, Q2.A dataset cannot have more than one mode.The mode is the tallest bar in a histogram.A measure of spread which magnifies the effect of values far from the mean is the:medianinterquartile rangevariancemodeIn Chap4 Practice Exercise Prob #5, the histogram interval width is:20 units4006 classes The vertical component of the magnetic induction in the Earth's magnetic field at Hobart is approximately 610-5T upward. What electric field is set up in a car travelling on a level surface at 100 km h-1due to this magnetic field? Which side or end of the car is positively charged? Approximately what p.d. is created across a car of typical size? Parallelogram L M N O is shown. Angle N is (2 x) degrees and angle L is (3 x minus 20) degrees. What is the measure of angle L in parallelogram LMNO? 20 30 40 50 2 PointsWhich situation is an example of Brutus's use of ethos?OA. He wants the crowd to feel proud by appealing to their pride aboutbeing honorable citizens of Rome.OB. He asks the crowd if they would rather be free and have Caesardead or have Caesar alive and be slaves.OC. He tells the audience that if they listen closely, they will know thathe is honorable and speaks the truth.OD. He reminds the crowd that Caesar was a cruel leader and wasmuch too ruthless and ambitious. A model rocket rises with constant acceleration to a height of 3.1 m, at which point its speed is 28.0 m/s. a. How much time does it take for the rocket to reach this height?b. What was the magnitude of the rocket's acceleration?c. Find the height of the rocket 0.10 s after launch.d. Find the speed of the rocket 0.10 s after launch. A closed container has 5.04 1023 atoms of a gas. Each atom of the gas weighs 1.67 1024 grams.Which of the following shows and explains the approximate total mass, in grams, of all the atoms of the gas in the container? (1 point)8.42 grams, because (5.04 1.67) (1023 1024 ) = 8.41686.71 grams, because (5.04 + 1.67) (1023 1024 ) = 6.710.67 grams, because (5.04 + 1.67) (1023 1024 ) = 6.71 1010.84 grams, because (5.04 1.67) (1023 1024 ) = 8.4168 101 If an amino acid contained a hydrocarbon (a group of multiple carbons and hydrogens linked together) as its side group, in which of the following categories could it be appropriately designated?A) hydrophilicB) polarC) nonpolarD) basicE) acidic A car drives on a highway with a speed of 68mi/hr. What is the speed in km/hr? In two or more complete sentences explain how to balance the chemical equation and classify its reaction type In the context of Porter's five forces model, the bargaining power of suppliers (auto dealers) is a weak force when considering the example of auto dealers setting the price of new cars in which consumers are unable to verify the 'true price' of vehicles. T/F What is the final step in personal financial planning?A.Setting goalsB.Reviewing and revising goalsC.Creating strategies for meeting goalsD.None of the above