Choose the correct statement about the periodic table's organization from the choices below.

Well! see the car experiences 300 N force to the right from the engine.

It also experiences 150N force to left due to friction and air resistance

Now, we know it is the net force which will decide the car will move in which direction

We have net force=300-150=150N

which is towards right

So that means car will accelerate in right direction.

Hope it helps!!

Hola aquí va la respuesta!!

What will happen if a car experiences a 300 N force to the right from the engine and a separate 150 N force due to friction and air resistance to the left? Show your work to support your position.

Answer:

Total time taken to travel 100 m = 23.82 seconds

In first case the velocity is constant and in the second case velocity is reducing by 0.2 m/s each second, so time taken will be different.

Explanation:

 A go-cart travels the first half of a 100m track with a constant speed of 5.00m/s

Time taken for first half of 100m = Distance velocity = 50/5 = 10 seconds

We have equation of motion [tex]s=ut+\frac{1}{2} at^2[/tex], where s is the displacement, u is the initial velocity, t is the time taken and a is the acceleration.

 For the second half of 100m we have

   s = 50 m, u = 5 m/s, a = [tex]-0.200m/s^2[/tex]

Substituting

  [tex]50=5t-\frac{1}{2} *0.2*t^2\\ \\ 0.1t^2-5t+50=0\\ \\ t^2-50t+500=0[/tex]

 t = 13.82 seconds or t = 36.18 seconds

 So it will take 13.82 seconds to travel second 50m

Total time taken = 10 + 13.82 = 23.82 seconds

In first case the velocity is constant and in the second case velocity is reducing by 0.2 m/s each second, so time taken will be different.

Final answer:

To determine the time it takes for a go-cart to travel a 100m track, we calculate the time for the first 50m traveled at a constant speed of 5.00m/s, which is 10 seconds. Then, for the second 50m, we factor in the deceleration of 0.200m/s^2, realizing the go-cart will not complete the second half of the track.

Explanation:

The question involves calculating the total time taken for a go-cart to complete a 100m track, which is split into two segments. The go-cart travels the first half with a constant speed, and in the second half, it experiences a deceleration due to a mechanical problem.

Step 1: Time for the first half

The go-cart travels the first 50m at a constant speed of 5.00m/s. The time (t) taken to travel this distance can be found using the formula: t = distance/speed. So, for the first 50m, t = 50m / 5.00m/s = 10 seconds.

Step 2: Time for the second half

In the second half, the go-cart slows down at a rate of 0.200m/s2, starting from the initial speed of 5.00m/s. To find the time taken to come to a stop, we use the kinematic equation v2 = u2 + 2as, where v is the final velocity (0 m/s), u is the initial velocity (5.00 m/s), a is the acceleration (-0.200m/s2), and s is the distance (50m). Solving for time, we get the second time period needed to travel the remaining distance.

Due to the deceleration, the final velocity of the go-cart will eventually reach 0 m/s before the end of the 50m stretch, which means we must first solve for the time to stop, and then add the remaining time to travel the leftover distance at 0 m/s, which is not possible, indicating the go-cart won't reach the end of the track due to the deceleration.

Speed v = distance travelled / time taken

v = d / t

v =  540 / 60h

v =   9 km /h

The speed of the car that travels a distance of 540km in 6 hours is 90km/hr

Explanation:

Given:

Distance the car travels =540km

Time taken by the car to travel 540 km= 6 hours

To Find:

Rate at which the car travels=?

Solution:

[tex]\text { formula for speed }=\frac{\text { distance }}{\text { time }}[/tex]

Substituting the known values,

[tex]\text { formula for speed }=\frac{\text {distance}}{\text {time}}[/tex]

[tex]\text { formula for speed }=\frac{540}{6}[/tex]

[tex]\text { formula for speed }=90 \mathrm{km} / \mathrm{hr}[/tex]

Thus the  speed of car is [tex]90 \mathrm{km} / \mathrm{hr}[/tex]

Average speed is defined as ratio of total distance covered and  total time

now we will have

[tex]d_1 = 4 km[/tex]

[tex]t_1 = 32 min[/tex]

[tex]d_2 = 2 km[/tex]

[tex]t_2 = 22 min[/tex]

[tex]d_3 = 1 km[/tex]

[tex]t_3 = 16 min[/tex]

now total distance moved is

[tex]d = d_1 + d_2 + d_3[/tex]

[tex]d = 4 + 2 + 1 = 7 km[/tex]

total time is given as

[tex]t = 32 min + 22 min + 16 min[/tex]

[tex]t = 70 min[/tex]

now average speed is given as

[tex]v_{avg} = \frac{d}{t}[/tex]

[tex]v_{avg} = \frac{7}{70} = 0.1 km/min[/tex]

so its average speed is 0.1 km per minute

Answer:

[tex]0.1 \ km/min[/tex]

Explanation:

We know speed , s is given by [tex]s=\dfrac{distance}{time}.[/tex]

NOW,

Average speed , S is given by:

[tex]S=\dfrac{total \ distance\ covered}{total\ time \ taken }[/tex].   .....eqn 1.

Total distance covered , [tex]D=4+2+1 \ km=7 \ km[/tex].

Total time taken, [tex]T=32+22+16\ min=70 \ min.[/tex]

Putting these values in equation 1.

We get,

[tex]S=\dfrac{7}{70} \ km/min=0.1\ km/min.[/tex]

Answer:

This is because of the first Newton's law:

If an object is at rest or at moving with constant velocity, it will remain doing that untill a force is applied on the object.

Now, if the car is still, and then it speeds, the box will want to keep the movement that it was doing before, so it will slide in the seat until the box gets the same speed as the car (this can happen when the box hits the back of the seat, and the back of the seat "pushes" the box)

Now, the same happens when the car stops, now the box has a velocity and when the car stops the box will keep moving forward, because there is no force that stops the box.

[tex] \huge \boxed{\mathbb{QUESTION} \downarrow}[/tex]

What is kinematics?

[tex] \large \boxed{\mathfrak{Answer \: with \: Explanation} \downarrow}[/tex]

The term that best describes how many waves that pass? It's frequency because how many waves are passed by a given point or time is called the waves frequency. I hope this helped you out on your assignment.

The term frequency (D) best describes the number of waves that pass a point in one second and is measured in hertz (Hz). It is calculated by dividing wave speed by wavelength or by counting the waves that pass a point within a set timeframe.

The term that is best described as the number of waves that pass a point in one second is frequency (D). Frequency is measured in hertz (Hz), which are equivalent to cycles per second. To determine the frequency, one must count how many waves pass a marker within a certain timeframe. For example, if three waves pass a point in three seconds, the frequency would be 1 Hz since one wave is passing per second.

The relationship between wave speed, frequency, and wavelength is frequency (f) = wave speed (v) / wavelength (λ). This equation shows that if you know the wave speed and its wavelength, you can calculate the frequency. Conversely, knowing the frequency and wavelength, you can determine the wave speed.

Explanation:

In this question, a position time graph is shown. We need to find the corresponding velocity time graph.

In position time graph, till 1 second the object is in uniform motion and reaches a distance of 30 meters. Then the object is at till 3 seconds. After 3 seconds, the object again reaches a distance of 40 meters uniformly.

Corresponding velocity-time graph is shown in figure (3). The object is moving initially with a speed of 30 m/s. After 1 second, it comes to rest till 3 seconds then it again moves. So, the correct option is (c). Hence, this is the required solution.

Option C is the velocity-time graph matches the position-time graph

A velocity-time graph, also known as a v-t graph, is a graphical representation that shows how an object's velocity changes over time. It uses the vertical axis to represent velocity (with direction indicated by sign) and the horizontal axis for time.

The graph's slope indicates acceleration or deceleration, flat segments represent constant velocity, and zero velocity points indicate moments of rest.

Velocity-time graphs are essential tools for analyzing an object's motion, including its acceleration, deceleration, periods of rest, and changes in direction.

Read more on velocity-time graph here https://brainly.com/question/28064297

#SPJ4

speed of first one is given as

[tex]v_1 = 1 mile \: in \: 1 min[/tex]

we also know that

1 mile = 1609 meter

also for time of motion

t = 1 min = 60 s

so in SI units the speed is given as

[tex]v = \frac{1609}{60}[/tex]

[tex]v = 26.82 m/s[/tex]

so 1 mile/min = 26.82 m/s

So here we will say that 1 mile per min is more speed than 20 m/s as we can see that 1 mile / min is 26.82 m/s in SI units after its conversion

Final answer:

Someone traveling at a mile a minute (26.67 m/s) is faster than someone traveling at 20 meters per second.

Explanation:

To determine who is faster between someone traveling a mile a minute and someone traveling at 20 meters per second, we need to convert one of the rates so that both are in the same units. First, let's convert a mile a minute to meters per second. Since one mile is equivalent to 1600 meters, and one minute is equivalent to 60 seconds, if you travel a mile in a minute, you're traveling 1600 meters in 60 seconds. Thus, the conversion is 1600 meters / 60 seconds = 26.67 meters per second.

Now, we compare:

A mile a minute = 26.67 m/s

Someone traveling at 20 m/s

It's clear that 26.67 m/s is faster than 20 m/s. Therefore, someone traveling a mile a minute is faster than someone traveling at 20 m/s.

rubber gloves would be best because

using something wet can shock you

plastic is an insulator

metal is also a conductor

the answer(s) would be B and C

Wave is a disturbance or energy that propagate through medium from one point to other point

So basically it is a flowing energy that flows into the medium and hence medium particles start oscillating about their mean position to and fro.

This motion of medium particles or this to and fro motion is about their mean position and this will always be cyclic or periodic motion

This means the disturbance or energy continuously flow through the medium such that it will change the position of medium particle and this will be cyclic in order

For an example

[tex]y = A sin(\omega t + kx + \phi)[/tex]

so here above equation of wave is a travelling wave in which displacement of medium particle from its mean position is given by "y"

Now we can see that this disturbance depends upon the sine function and it will repeat its same position after every 2 pi time interval as it is cyclic function for this value

Due to this phenomenon of repeatation of its same position we can say that it is disturbance of wave is cyclic.

A cyclic or periodic wave is a repeating disturbance characterized by crests and troughs, with a wavelength defining the distance between successive crests. The wave's period is the time for a complete oscillation, and its frequency is the number of cycles per unit time.

When we say that a wave is a cyclic, or periodic, disturbance, we mean it exhibits a specific pattern that repeats itself over time. A wave motion has a series of crests and troughs; moving from one crest through a trough to the next crest constitutes one complete cycle. The wavelength is the horizontal distance between successive wave crests. Waves like those on the water surface can cause objects to experience simple harmonic motion, moving up and down as the wave passes through. The period T of the wave is the time it takes for one complete oscillation, while the frequency f is the number of cycles per unit time, given by the equation f = 1/T. Understanding these properties helps describe a wave's amplitude, frequency, wavelength, speed, and energy—all essential to characterize periodic waves and their effects on the surrounding environment.

https://brainly.com/question/31102450

#SPJ3

Given that the mass of the car is M = 439 Kg

We know that the acceleration due to gravity on earth is g = 9.8 m/[tex]s^{2}[/tex]

Weight can be calculated using the formula

W = mg

Plugging in the numbers, we get

W = (439)(9.8) = 4302.2 N

Thus, the weight of the car on earth is 4,302 N.

In this experiment, the warmth of the air is an dependent variable.

Answer:

Dependent variable

Explanation:

In an experiment, Independent variable means the one which is being changed to observe changes in the other variable (dependent). The environmental factor which is kept stable is known as constant.

In the given experiment, the material is an independent variable. The warmth of the air is dependent variable because the warmth will depend on the material. All the boxes are kept in same place. This is constant. All the boxes are kept for 1 hour. Time is the control.

-- If the force is applied in the same direction as the object is moving, then the object's momentum in that direction will increase.

-- If the force is applied in the direction OPPOSITE to the way the object is moving, then the object's momentum will decrease.

-- In either case, the CHANGE in the object's momentum will be

(strength of the force) x (length of time the force is applied) .

This quantity is also called "impulse".

the aanswer is d. ur wellcome

The illustration is an example of the 3-color photo-offset printing process.

The illustration's content is a simplified conceptual representation of a pulsed industrial laser being used to slice donuts while they are still cooking in the oil, prior to injection of jelly via the same orifice.

In a distance versus time graph, the distance is plotted on the y-axis, or vertical axis and the time is plotted on the x-axis (Option B).

In a distance versus time graph, the x-axis, which is the horizontal axis, represents time.

This means that time is plotted along the horizontal axis, and it shows how much time has passed as you move from left to right on the graph. The vertical y-axis represents distance, so the graph illustrates how distance changes over time.

Therefore, the answer is x- axis, represents time.

Learn more about Distance versus time graph here:

https://brainly.com/question/6873

#SPJ1

Final answer:

Time is plotted on the x-axis of a distance versus time graph because it is the independent variable, while distance is dependent and is plotted on the y-axis.

Explanation:

On a distance versus time graph, time is typically plotted on the x-axis. This is because time is considered an independent variable. When analyzing motion, an object's distance or displacement depends on the elapsed time; hence, distance is plotted on the y-axis. The question mentions other variables like speed and velocity, which are related but represented differently in graphical form. For instance, a velocity vs. time graph has velocity on the y-axis and time on the x-axis, where the slope represents acceleration, and the area under the curve represents displacement. A graph of displacement vs. time would display a straight line if the velocity (v) is constant and time (t) is the independent variable on the x-axis.

1 AU = it is defined as distance of Earth from Sun

it is also known as solar distance

So here we know that distance of Earth and Sun is

[tex]1 AU = 1.5 * 10^{11} meter[/tex]

1 Light Year = It is defined as the distance covered by light in 1 year of time

it is calculated by simple product of speed * time

[tex]1 Ly = c*t[/tex]

[tex]c = 3* 10^8 m/s[/tex] = speed of light

[tex]t = 1 year = 365 * 24 * 3600 s[/tex]

[tex]t = 3.15 * 10^7 s[/tex]

now we can find the value of 1 Ly

[tex]1 Ly = 9.46 * 10^{15} m[/tex]

now Voyager distance is given as

[tex]d = 141 AU[/tex]

now in order to convert it into Ly we can say

[tex]d = 141 * 1.5 * 10^{11} = 2.115 * 10^{13} m[/tex]

now we have

[tex]d = \frac{2.115 * 10^{13}}{9.46 * 10^{15}}[/tex]

[tex]d = 2.24 * 10^{-3} Ly[/tex]

so the distance in light year must be 0.00224 Light years

As Potential energy =mgh

m= 0.95kg

h=3 meter

g = 9.8 m/sec^2. ( acceleration due to gravity)

So P.E =(0.95)(9.8)(3)kgm^2/s^2

P.E =27.93 joules

The answer is C I hope this helps

The correct option is C kg.

The system international ( SI) unit of mass is kilogram.

It is denoted as kg.

answer is C

slope= (y2-y1)/(x2-x1)=(300 km-0km)/(4h-0h)=(300km)/(0 h)=75km/h

v=d/t= 150/2=75

Average velocity is given as the total displacement of an object over a given time interval

Average velocity = total displacement /time interval

consider the time interval t₁ = 0  to t₂ = 4

at t₁ = 0 , d₁ = 0 km

at t₂ = 4 , d₂ = 300 km

Δd = total displacement = d₂ - d₁ = 300 - 0 = 300 km

Δt = time interval = t₂ - t₁ = 4 - 0 = 4 h

average velocity is given as

V = Δd/Δt = 300/4 = 75 km/h

Hence the correct choice is

C) 75 km/hr

An object has a kinetic energy of 88 J and a mass of 45 kg, the object is moving at the speed of 1.977 meters/second.

Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.

The expression for total mechanical energy is as follows

ME= PE+KE

Where ME is the mechanical energy

PE is the total potential energy

KE is the total kinetic energy

As for the given problem, An object has a kinetic energy of 88 J and a mass of 45 kg.

the kinetic energy of any object is given by the expression

K.E= 1/2*m*v²

where K.E is the kinetic energy of the object

m is the mass of the object

v is the velocity of the object

by substituting the respective values

88 = 0.5* 45*v²

v²=3.911

v = 1.977 meter/ seconds

The object is moving at the speed of 1.977 meters/ seconds.

Learn more about mechanical energy from here

brainly.com/question/12319302

#SPJ5

durability and flexibility

look at you shoelaces they are not hard, don't move like a liquid, or have a high density.

Answer:

Flexibility and durability.

Explanation:

The material of leather and nylon is durable which means it can be used for a long period of time and the material is also flexible means it is not hard. The material which is used in shoe laces can be chosen on the basis of its flexibility and its long lasting nature because costumer do not want to invest on them more than one time or on the basis of easily use.

Therefore, due to the long lasting nature means durability and their flexibility nylon and leather is mostly used in shoe laces.

The same current flows through each part of a series circuit. The total resistance of a series circuit is equal to the sum of individual resistances. Voltage applied to a series circuit is equal to the sum of the individual voltage drops.

In a series circuit, the same amount of current flows through each component or circuit element. The voltage drop across each component in a series circuit could vary. The equivalent resistance of a series circuit is the sum of the resistances of each component.

In a series circuit, the current running through each circuit element or component, whether it's a resistor, capacitor, or inductor, remains the same. This is a fundamental concept in electricity and contrary to a parallel circuit where the voltage across each component is constant.

Let's take an example of resistors in a series circuit. The voltage drop or power dissipation across each resistor could be different. However, if you sum the voltage drops across each resistor, it adds up to the total power source input. This phenomenon can be explained using Ohm's law and the concept of equivalent resistance.

The equivalent resistance in a series circuit is the algebraic sum of individual resistances. Therefore, a key characteristic of a series circuit is that if one component fails, for instance, a bulb burns out, it affects all other components as the current flow is disturbed.

https://brainly.com/question/33971709

#SPJ3

Yes, it is a Heterogeneous mixture because you can take it apart and look at the pieces you used to create the sandwich

Answer:

B.0 N

Explanation:

Based on the description of the free-body diagram, there are only two forces acting on the child sitting on the seat:

- The force of gravity, Fg=-100 N, in the downward direction

- The normal reaction of the chair on the child, Fn=100 N, in the upward direction

The two forces have same magnitude but in opposite directions, so the net force (resultant of the two forces) is zero:

[tex]F_{net}=F_n+F_g=100 N-100 N=0 N[/tex]

A stone is thrown straight up. when it reaches it’s highest point, its velocity is zero and acceleration is not zero. Option b

When a stone is thrown straight up, it reaches a point where its velocity is zero because it stops momentarily before starting to fall back down. However, even at this highest point, the acceleration of the stone is not zero.

The stone is still under the influence of gravity, which provides a constant acceleration directed downwards towards the Earth's center. Therefore, the acceleration due to gravity, g, continues to act on the stone even when its velocity is zero.

The correct answer to the question is therefore (b) its velocity is zero and acceleration is not zero. The acceleration of the stone at its highest point is equal to the acceleration due to gravity, which is approximately 9.8 m/s2 directed downwards. Option  b

A prediction is a guess of something happening in the future.

A prophecy, but not always concerning with weather forecast. Pre signifies “before” and diction has to accomplish with talking. So a prediction is a judgment about the tomorrow. It's a daydream, which is based on events or consecration, but not enduringly. A prediction is usually, but not invariably, depends upon experience or information. There is no universal consensus about the specific difference among the two terms distinct authors and communities ascribe various connotations.

B is the answer i pretty sure...

The force he applies on himself is balanced force.

Answer:a balanced force

Explanation:

Answer:a bowling ball will hit the ground first

Explanation:because a balling ball had more mass(weight) they won’t hit the ground at the same time because there’s on earth so there’s air resistance