If a 0.200-kilogram ball sits on a shelf 2.00 meters from the floor, how much mechanical energy (me) does it possess? More than 3.92 j exactly 3.92 j less than 3.92 j cannot be determined because kinetic energy cannot be calculated

Answers

Answer 1

Answer:

Mechanical energy  = 3.92 J

exactly 3.92 j

Explanation:

As we know that mechanical energy is sum of kinetic energy and potential energy of the system

so here we can say that mechanical energy is sum of kinetic energy of ball and its potential energy

Since ball is at rest so kinetic energy of the ball must be ZERO

Now for potential energy we know that

[tex]U = mgh[/tex]

now we know

m = 0.2 kg

h = 2 m

now for potential ene'rgy

[tex]U = (0.20)(9.8)(2)[/tex]

[tex]U = 3.92 J[/tex]

so mechanical energy is given as

Mechanical Energy = 3.92 + 0 = 3.92 J

Answer 2

Answer:

b

Explanation:


Related Questions

amber applies a net force of 35 N to pull her younger brother (32 kg) in a wagon (3 kg). at what rate does the wagon accerlerate

A. 1.09 m/s2
B. 0.91 m/s2
C. 1.00 m/s2
D. It doesn’t accelerate because force and mass are equal

Answers

Answer:

C. 1.00 m/s^2

Explanation:

We can solve the problem by using Newton's second law:

[tex]F=ma[/tex]

where

F is the net force acting on an object

m is the mass of the object

a is its acceleration

In this case, the net force applied by Amber is F=35 N, while the total mass of the brother+the wagon is

[tex]m=32 kg+3 kg=35 kg[/tex]

Therefore, we can re-arrange the previous equation to find the acceleration:

[tex]a=\frac{F}{m}=\frac{35 N}{35 kg}=1.00 m/s^2[/tex]

Which is a correct reason to physically connect objects with a bond wire when transferring flammable liquids? A. To create a pathway for the liquid to flow easily B. To eliminate a difference in the static charge potential C. To lessen the likelihood of a spill

Answers

When Transferring Flammable Liquids - Option A

To create a pathway for the liquid to flow easily is a correct reason to physically connect objects with a bond wire when transferring flammable liquids. Physically connect the two conductive objects together with a bond wire to eliminate a difference in static charge potential among them. The bond wire is attached between the containers in the process of flammable filling liquid actions except for a metallic path is found.


Answer

Correct Option is A

Explanation:

Correct Option is A that is to create a pathway for the liquid to flow easily

Option B

This option is not correct because objects are not conductive.  

Option C

This option is also not correct because better options are there to lessen the spill

Hope this answer will help you


Identify two factors that determine the intensity of sound

Answers

Amplitude and distance.

Which is an example of the conversion of gravitational potential energy into kinetic energy?

Answers

a falling rain drop may be an example.

Answer:

When a ball is dropped from some height from rest then while its motion under gravity its initial gravitational potential energy converts into kinetic energy

Explanation:

When ball is placed at some height "h" above the floor at rest then initial gravitational potential energy is given as

[tex]U = mgh[/tex]

here we know

m = mass of the ball

g = acceleration due to gravity

h = height of the ball

now when ball is dropped from this height then its initial potential energy will convert into kinetic energy.

so speed of ball at some instant of time is given as

[tex]\frac{1}{2} mv^2 = mgh[/tex]

[tex]v = \sqrt{2gh}[/tex]

so here in this case gravitational potential energy will convert into kinetic energy of ball

Which of these are minerals? Select all that apply

A) mica

B) quartz

C) steam

D) copper

Answers

From that particular list:

Mica (A), Quartz (B), and Copper (D) are minerals.

Steam (C) isn't.

Convenience sampling can be produce biased research results. True or false?

Answers

True is your answer.

Hope this helps....

When sugar is burned, water vapor and carbon dioxide are produced. A sugar molecule has a specific number of carbon, hydrogen, and oxygen atoms. Use the balanced chemical equation to identify the number of carbon, hydrogen, and oxygen atoms in sugar. Sugar + 12O2 ? 11H2O + 12CO2

Answers

Answer:

Number of carbon, hydrogen, and oxygen atoms in sugar:

C: 12H: 22O: 11

Explanation:

1) Given balanced chemical equation:

Sugar(s) + 12O₂(g) →  11H₂O(g) + 12CO₂(g)

2) Mass conservation law: in a chemical reaction, the atoms are not created nor destroyed; they recombine to form new substances, so the number of atoms of each kind in the reactants is equal to the number of atoms of the same kind in the products.


3) Balance.

-----------------------------------------------------------------------------------------------------

Atom          Products                    =            Reactants

-----------------------------------------------------------------------------------------------------

C                12CO₂ ⇒ 12               =             12 in sugar

-----------------------------------------------------------------------------------------------------

H               11H₂O ⇒ 11 × 2 = 22   =             22 in sugar

-----------------------------------------------------------------------------------------------------

O               12CO₂ ⇒ 12 × 2 = 24                12 × 2 = 24 in O₂ + x in sugar

                  11H₂O ⇒ 11

                 -----------------------------       --------------------------------------------------

                  24 + 11 = 35                =         24 + x

----------------------------------------------------------------------------------------------------

         

Solve for x: 35 = 24 + x ⇒  x = 35 - 24 = 11 ∴ 11 O atoms in sugar


Conclusion:

Number of carbon, hydrogen, and oxygen atoms in sugar:

C: 12H: 22O: 11

which surface winds blow between the subtropical high and the equator

A) trade winds

B) polar easterlies

C) sea breezes

D) westerlies

Answers

Answer:

trade winds

Explanation:

In tropics regions on the lower portion of earth's atmosphere the surface winds are observed in prevailing pattern. In northern hemisphere the trade wind predominantly blows from north east. In southern hemisphere it flows from south east. Subtropical high and the equator is in between these areas.

Thus, trade wind blow between the subtropical high and the equator.


Answer:

trade winds

Explanation:

What are the two possible solutions to 5x^2−15=0?

Answers

I have attached the solution as image.

Final Answer:

The two possible solutions of [tex]5x^{2} - 5 = 0[/tex] are [tex]\( x = \pm \sqrt{3} \)[/tex].

Explanation:

To find the solutions to the quadratic equation [tex]\(5x^2 - 15 = 0\)[/tex], we first add 15 to both sides to isolate the term involving [tex]\(x^2\)[/tex], yielding [tex]\(5x^2 = 15\)[/tex]. Then, we divide both sides by 5 to solve for [tex]\(x^2\)[/tex], giving us [tex]\(x^2 = 3\)[/tex]. Taking the square root of both sides, we obtain [tex]\(x = \pm \sqrt{3}\)[/tex]. Therefore, the two possible solutions are [tex]\(x = \sqrt{3}\)[/tex] and [tex]\(x = -\sqrt{3}\)[/tex]. These solutions represent the values of x for which the equation is true.

According to a simplified model of a mammalian heart, at each pulse approximately 20 g of blood is accelerated from 0.20 m/s to 0.32 m/s during a period of 0.08 s . What is the magnitude of the force exerted by the heart muscle?

Answers

Answer:

    Magnitude of the force exerted by the heart muscle  = 0.03 N

Explanation:

  We have force = mass * acceleration

   Acceleration = Rate of change of velocity = Change in velocity/time = (0.32-0.20)/0.08

                          = 0.12/0.08 = 12/8 = 1.5 [tex]m/s^2[/tex]

   Mass of blood = 20 g = 20/1000 kg = 0.02 kg

   Magnitude of the force exerted by heart muscle = 0.02*1.5 = 0.03 N

The magnitude of the force exerted by the heart muscle is 0.03 N.

From Newton's second law, we know that F = ma

Where;

F = force

m = mass of the body

a = acceleration

Now we must find the acceleration from:

a = v - u/t

a = acceleration

v = final velocity

u = initial veocity

t = time taken

Substituting values;

a = 0.32 m/s -  0.20 m/s/ 0.08 s

a = 1.5 m/s^2

Since F = ma

But m was given in grams and we must convert to kilograms so m = 0.002 Kg

Therefore;

F = 0.002 Kg × 1.5 m/s^2

F = 0.03 N

Learn more: https://brainly.com/question/946875

Dalton's model of an atom is best described as _____. A. A solar system B. A cloud C. A scoop of chocolate chip ice cream D. A solid sphere

Answers

Solid sphere is the correct answer.

Answer:

D) A Solid Sphere

Explanation:

As per Dalton's atomic description he said that atom is not divisible and that is the smallest part of atom.

It has no net charge and it can not be divided further. So till Dalton's theory of atom electron and nucleons were not discovered.

So we can consider atom as a model of Solid sphere  because similar to a solid sphere the atom is considered to be unique and not destructible.

So here correct answer will be

D) A Solid Sphere

f a wave has a wavelength of 9 meters and a period of 0.006, what is the velocity of the wave? A. 1,200 m/s B. 1,500 m/s C. 1,800 m/s D. 1,285 m/s

Answers

Answer: 1500 m/sec. ( b )

Solution:

V= f (λ)

Speed = frequency. Wavelength  

And frequency = 1/time period

First we will find the frequency :

Frequency = 1/time period

1/0.006 = 166.67 Hz

Using this in the equation:

Speed = frequency. Wavelength  

V= f (λ)

9 × 166.67  

= 1500.03 ≈ 1500

V (Speed) = 1500 m/s.

Note: Do not forget to mention the units or otherwise they may cost you marks!


Answer:

B

Explanation:

a ball is thrown upwards at an unknown speed. in a time of
.5 second the ball has a height of 6 meters.

what is the initial speed of the ball?

what is the balls speed at a height of 6 meters?

what would be the balls maximum height? (hint: you dont know the time to reach maximum height)

Answers

Answer:

a)  Initial speed of the ball = 14.45 m/s

b) At height 6 m speed of ball = 9.55 m/s

c) Maximum height reached = 10.65 m

Explanation:

a)  We have equation of motion [tex]s=ut+\frac{1}{2} at^2[/tex], where s is the displacement, u is the initial velocity, t is the time taken and a is the acceleration.

s = 6 m, t = 0.5 seconds, a = acceleration due to gravity value = -9.8[tex]m/s^2[/tex]

 Substituting

    [tex]6=u*0.5-\frac{1}{2} *9.8*0.5^2\\ \\ u=14.45m/s[/tex]

 Initial speed of the ball = 14.45 m/s

 b) We have equation of motion [tex]v^2=u^2+2as[/tex], where v is the final velocity

   s = 6 m, u = 14.45 m/s, a = -9.8[tex]m/s^2[/tex]

    Substituting

        [tex]v^2=14.45^2-2*9.8*6\\ \\ v=9.55m/s[/tex]

  So at height 6 m speed of ball = 9.55 m/s

c) We have equation of motion [tex]v^2=u^2+2as[/tex], where v is the final velocity

   u = 14.45 m/s, v =0 , a = -9.8[tex]m/s^2[/tex]

   Substituting

     [tex]0^2=14.45^2-2*9.8*s\\ \\ s=10.65 m[/tex]

  Maximum height reached = 10.65 m

a toy friction car is propelled forward from rest by a girl's hand which causes it to reach a forward velocity of 3.5m/s in 0.4 seconds. it is then rreleased and later stops in 5.6 seconds.

a) what is the acceleration with which the car speeded up?

b)what is the acceleration with which the car slowed down?

c) how far did the toy car travel?

Answers

Answer:

a)  Acceleration = [tex]8.75m/s^2[/tex]

b) Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) Car travels 9.8 m

Explanation:

  Acceleration = Change in velocity/Time

a) Change in velocity = 3.5-0 = 3.5 m/s

   Time = 0.4 seconds

    Acceleration = [tex]3.5/0.4=8.75m/s^2[/tex]

b) Change in velocity = 0 - 3.5 = -3.5 m/s

   Time = 5.6 seconds

   Acceleration = [tex]-3.5/5.6=-0.625m/s^2[/tex]

   Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) We have equation of motion, [tex]v^2=u^2+2as[/tex], where u is the initial velocity, u is the final velocity, s is the displacement and a is the acceleration.

 Here v = 0 m/s, u = 3.5 m/s, a = -0.625[tex]m/s^2[/tex]

 Substituting

    [tex]0^2=3.5^2-2*0.625*s\\ \\ s=9.8m[/tex]

  So, car travels 9.8 m

For this position-time graph, what is the average velocity for the entire curve?

A. -4 m/s
B. -10 m/s
C. +10 m/s
D. +4 m/s

Answers

A. Without doing much math, it can be seen from the graph that the altitude is decreasing. The slope of the position time graph determines velocity, so by comparing the start to the end of the graph, it can be seen that -100m was the change in altitude and 25 seconds was the change in time. Divide -100 by 25 to get -4m/s.
Final answer:

The average velocity for the entire curve on a position-time graph can be found by calculating the slope between the initial and final points. In this case, the average velocity is -4 m/s.

The correct answer would be Option A: -4 m/s.

Explanation:

To find the average velocity for the entire curve on a position-time graph, you can calculate the slope of the line connecting the initial and final points on the graph.

Identify the initial position and time on the graph.Identify the final position and time on the graph.Calculate the change in position by subtracting the initial position from the final position.Calculate the change in time by subtracting the initial time from the final time.Divide the change in position by the change in time to calculate the average velocity.

In this case, it looks like the curve has a downward slope, so the average velocity would be negative. Based on the given answer options, the correct answer would be Option A: -4 m/s.

Learn more about Average velocity here:

https://brainly.com/question/1375440

#SPJ2

A glass is semifilled with liquid water and place in a room at 20 oc. after some time, part of the water evaporates. what happened to the average kinetic energy and the average potential energy of the water particles that escaped to the gas phase?

Answers

Water is placed at room temperature at 20 degree C

now after some water evaporate at room temperature

so here we can say speed of water molecules will not change as the temperature is same after evaporation

as we know that total kinetic energy is given by

[tex]KE = \frac{f}{2} nRT[/tex]

since temperature is same then energy will not change here

now as water evaporate to vapors then we can say that here all molecules are separated more in vapor phase so force of interaction will be less in this phase

And since potential energy depends on the force so potential energy will decrease in this phase

Final answer:

When water evaporates, the molecules that escape to the gas phase have an increase in average kinetic energy and a decrease in average potential energy.

Explanation:

When a liquid, such as water, evaporates, the molecules that escape into the gas phase have an increase in average kinetic energy and a decrease in average potential energy compared to when they were in the liquid phase.

The increase in average kinetic energy is due to the fact that molecules in the gas phase move faster than those in the liquid phase. This increase in kinetic energy allows the molecules to overcome the intermolecular forces and escape into the gas phase.

On the other hand, the decrease in average potential energy occurs because the intermolecular forces holding the liquid together are weaker than those between molecules in the gas phase. As a result, the average potential energy of the molecules that escape to the gas phase is lower.

two strong permanent magnets are placed one inch apart. which two fundamental forces will most affect them.
Weak and gravity
Strong and electromagnetic
Gravity and strong
Electromagnetic and gravity
An object is transported from Earth to deep space, far from any stars or planets. What happens to the mass and weight of the object?
Both the weight and mass of the object change.
Neither the weight nor the mass of the object change.
The weight of the object changes, the mass stays the same
The mass of the object changes, the weight stays the same

Answers

When two permanent magnets are placed adjacent to each other then they will exert magnetic force on each other.

There are four fundamental forces in nature

1. Gravitational force

2. Electromagnetic force

3. Weak Nuclear force

4. Strong nuclear force

So here magnets will exert two fundamental forces on each other Electromagnetic force and Gravity

#2

mass is defined as the composition or amount of substance while we can define weight as gravitational force of earth of the given object

Now when we transport an object from surface of earth to space far away from any planet then the amount of substance or mass will not change while the weight of the substance will decrease to zero because there is no gravity at this position

So we can say

mass = constant and will remain same

Weight = mass * gravity = 0

The weight of the object changes, the mass stays the same

Final answer:

The electromagnetic and gravitational forces are what affect two permanent magnets placed an inch apart, with electromagnetism being the stronger influence. If an object is moved to deep space, its weight changes due to reduced gravity, but its mass remains constant.

Explanation:

When two strong permanent magnets are placed one inch apart, the two fundamental forces that will most affect them are electromagnetic and gravity. The electromagnetic force is responsible for the interaction between the magnetic fields of the magnets, causing them to attract or repel each other depending on their poles. Despite being a very weak force in comparison, gravity also acts upon the magnets, although its effect is negligible compared to the electromagnetic force.

In the case of an object transported from Earth to deep space, the weight of the object changes, but the mass stays the same. Weight is the force exerted on an object by gravity, which would decrease significantly far from any stars or planets. However, mass is a measure of the amount of matter in an object, which remains constant regardless of location.

Are external computer flash drive can hold 1 gigabyte of data. How many bytes is this?

Answers

The prefix "giga..." means 1 billion. We talk about that flash drive as if its capacity is exactly 1 billion bytes.

But with digital things, a "giga..." Is actually 2^30 = 1,073,741,824 .

a toy friction car is propelled forward from rest by a girl's hand which causes it to reach a forward velocity of 3.5m/s in 0.4 seconds. it is then rreleased and later stops in 5.6 seconds

Answers

Answer:

a)  Acceleration = [tex]8.75m/s^2[/tex]

b) Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) Car travels 9.8 m

Explanation:

  Acceleration = Change in velocity/Time

a) Change in velocity = 3.5-0 = 3.5 m/s

   Time = 0.4 seconds

    Acceleration = [tex]3.5/0.4=8.75m/s^2[/tex]

b) Change in velocity = 0 - 3.5 = -3.5 m/s

   Time = 5.6 seconds

   Acceleration = [tex]-3.5/5.6=-0.625m/s^2[/tex]

   Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) We have equation of motion, [tex]v^2=u^2+2as[/tex], where u is the initial velocity, u is the final velocity, s is the displacement and a is the acceleration.

 Here v = 0 m/s, u = 3.5 m/s, a = -0.625[tex]m/s^2[/tex]

 Substituting

    [tex]0^2=3.5^2-2*0.625*s\\ \\ s=9.8m[/tex]

  So, car travels 9.8 m

A 500 kg cannon exerts a force of 600 N on a 10 kg cannon ball. Find (a) the acceleration of the cannon and (b) the acceleration of the cannon ball.

Answers

A 500 kg cannon exerts 600 N force on 10 kg cannon ball

Now here we can say that as per Newton's III law every action has equal and opposite reaction force

So here when cannon exert a force of 600 N on the ball then equal and opposite magnitude force will act on cannon itself

Part a)

Okay now we will find the acceleration of cannon using the same force

so as per Newton's formula

[tex]F = ma[/tex]

[tex]600 = 500 * a[/tex]

[tex]a = 1.2 m/s^2[/tex]

Part b)

Okay now we will find the acceleration of cannon ball using the given force

so as per Newton's formula

[tex]F = ma[/tex]

[tex]600 = 10 * a[/tex]

[tex]a = 60 m/s^2[/tex]

What Device can be used to increase voltage from a source of direct-current?

Answers

multi meter reading instruments Device can be used to increase voltage know direct-current

Calculate the acceleration of a bus whose speed changes from 6 m/s to 12 m/s over a period of 3s.

Answers

Final answer:

The bus's acceleration, calculated using the formula for acceleration (change in velocity over change in time), is 2 meters per second squared (2 m/s²).

Explanation:

To calculate the acceleration of a bus whose speed changes from 6 m/s to 12 m/s over a period of 3 seconds, we use the formula for acceleration (a), which is the change in velocity (Δv) divided by the change in time (Δt). The change in velocity is the final velocity minus the initial velocity. In this case, the final velocity (vf) is 12 m/s and the initial velocity (vi) is 6 m/s. Thus, Δv = vf - vi = 12 m/s - 6 m/s = 6 m/s. The change in time, Δt, is 3 seconds.

Now, we plug these values into the formula:

a = Δv / Δt = (12 m/s - 6 m/s) / 3 s

a = 6 m/s / 3 s

a = 2 m/s²

Therefore, the acceleration of the bus is 2 meters per second squared (2 m/s²).

Kat is creating a model to show how plate movements are linked to the formation of new rocks, and she is trying to place the steps in the correct order. Which step comes first?


The tectonic plates move apart from one another

Lava flows onto Earth's surface


magma forms beneath the plates and rises up through the cracks


Lava cools and hardens to form igneous rock

Answers

1. Tectonic plates move
2. Magma forms and rises through the cracks
3. Lava flows onto the Earth’s surface
4. Lava cools and hardens to form igneous rock

Igneous Rocks are rocks that are made from magma (molten lava). The correct order of the Igneous Rock formation is ACBD.

Igneous Rock:

These are the rocks made from magma (molten lava). The magma form in the upper mantle and lower crust because of very high temperature.

These rocks form,

Movement of a tectonic plate.The magma inside the crust rises from the cracks.Lava flows on the surface of the earth.When lava cools and crystallizes, it forms igneous rocks.

Therefore, the correct order of the Igneous Rock formation is ACBD.

Learn more about Igneous Rock:

https://brainly.com/question/2514852

whats the standard unit for measuring mass

Answers

Kilograms


The kilogram is the SI base unit of mass and is equal to the mass of the international prototype of the kilogram, a platinum-iridium standard that is kept at the International Bureau of Weights and Measures (BIPM)

Hope this helps!
The standard unit for measuring mass is kilograms.

Rock a is dropped from a cliff and rock b is thrown upward from the same position on the cliff.
a. when each rock reaches the ground at the bottom of the cliff, which rock has a greater velocity?

Answers

In the A case, v0=0, in the B case v0 >0, so v is greater in the B case. In other words, v is related to the kinetic energy, since the rock B has a larger kinetic energy in the beginning, it also has a larger kinetic energy (larger velocity) in the end.

The correct answer is that rock a has a greater velocity when each rock reaches the ground at the bottom of the cliff.

To understand why rock a has a greater velocity upon impact with the ground, let's consider the physics of free-falling objects under the influence of gravity. Both rocks are subject to the acceleration due to gravity, which is approximately[tex]\(9.81 \, \text{m/s}^2\)[/tex] downward.

For rock a, which is simply dropped from rest, its initial velocity is zero. The only force acting on it is gravity, pulling it downward. Its velocity at any time \(t\) before it hits the ground can be calculated using the equation for uniformly accelerated motion:

[tex]\[ v_{a} = u_{a} + gt \][/tex]

where[tex]\(v_{a}\)[/tex] is the final velocity, [tex]\(u_{a}\)[/tex] is the initial velocity (which is zero for rock a), [tex]\(g\)[/tex] is the acceleration due to gravity, and [tex]\(t\)[/tex] is the time of fall. Since [tex]\(u_{a} = 0\)[/tex], the equation simplifies to:

[tex]\[ v_{a} = gt \][/tex]

For rock b, which is thrown upward, its initial velocity[tex]\(u_{b}\)[/tex] is upward and has some positive value. As it rises, it slows down due to the acceleration due to gravity acting in the opposite direction of its motion. At its highest point, its velocity will be zero, and then it will start to fall back down, accelerating due to gravity until it hits the ground. The velocity of rock b just before impact can be calculated using the same equation for uniformly accelerated motion, but taking into account that it starts with an initial upward velocity and then reverses direction:

[tex]\[ v_{b} = u_{b} - gt_{up} + gt_{down} \][/tex]

where [tex]\(t_{up}\)[/tex]is the time it takes for rock b to reach its highest point and \[tex](t_{down}\)[/tex]is the time it takes to fall back to the ground. Since the acceleration due to gravity is the same for both rocks, and assuming that air resistance is negligible, the time of ascent [tex]\(t_{up}\)[/tex] for rock b is equal to the time of descent [tex]\(t_{down}\), so \(t_{up} = t_{down} = t/2\).[/tex] The equation for rock b's velocity upon impact becomes:

[tex]\[ v_{b} = u_{b} - g(t/2) + g(t/2) \] \[ v_{b} = u_{b} \][/tex]

Since rock a was dropped from rest, its velocity upon impact is due solely to the acceleration due to gravity over the entire time \(t\) of its fall, while rock b's velocity upon impact is its initial launch velocity minus the effect of gravity over half the time (as it rises) and plus the effect of gravity over the other half of the time (as it falls).

Because rock a starts from rest and only accelerates downward, it will have a greater velocity upon impact than rock b, which has its initial upward velocity reduced by the same gravitational acceleration over the time of its ascent and then increased by the same gravitational acceleration over the time of its descent. Thus, rock a's velocity at the moment of impact will be greater than rock b's velocity at the moment of impact, assuming they both hit the ground at the same time and air resistance is negligible.

The acceleration due to gravity on the moon is 1.6 m/s2, about a sixth that of Earth’s. Which accurately describes the weight of an object on the moon? An object on the moon is 1/6 times lighter than on Earth. An object on the moon is 1/6 times heavier than on Earth. An object on the moon is six times lighter than on Earth. An object on the moon is six times heavier than on Earth.

Answers

The answer is C.  

An object on the moon is six times lighter than on Earth.


The statement accurately describes the weight of an object on the moon is  An object on the moon is 1/6 times lighter than on Earth.

What is weight?

The weight is the product of mass of the object and acceleration due to gravity on the specific planet.

When the acceleration due to gravity is less, the weight measured will be less. The acceleration due to gravity on the moon is 1.6 m/s2, about a sixth that of Earth’s.

Thus, an object on the moon is 1/6 times lighter than on Earth.

Learn more about Weight.

https://brainly.com/question/10069252

#SPJ2


Jonas sees this symbol in a circuit diagram.


Which circuit component does the symbol represent?

A) resistor
B) bulb
C) battery
D) voltmeter

Answers

The circuit component the symbol represents is: C) Battery

Explanation :

An electric circuit is a closed network consisting of an electrical component. It consists of a resistor, a battery, an ammeter, a voltmeter etc.

A symbol is given to every component.

The given symbol shows a battery. It consists of more than one cell and used as a power source in a circuit. It has two terminals i.e a positive terminal and a negative terminal.          

The positive terminal of a battery is a cathode and a negative terminal is an anode.    

Hence, the correct option is (C) " battery ".

The color of a substance is a physical property. Please select the best answer from the choices provided T F

Answers

True. Bc a physical property is the appearance. A chemical property is like flammability. Hope this helps!

Answer:

True

Explanation:

Color is the splitting of light into different spectra. Light, by nature, is monochromatic. This means that it has one wave length. The prism experiment has proved that light has many colors. About 7 colors have been discovered.

The colors simply denote the different wavelengths of the "monochromatic" light. The colors are the different wavelengths of light when it is split.

The eye, sees color as a reflection. In the electron sense, color is as a result o electrons being "excited" or promoted from a lower orbital to a higher energy orbital.

Which of these types of rock form near earths surface? Select all that apply.

A. Igneous

B. Sedimentary

C. Metamorphic

Answers

A. Igneous

Extrusive igneous rocks cool and solidify quicker than intrusive igneous rocks. They are formed by the cooling of molten magma on the earth's surface.

Sedimentary (sed-uh-MEN-tuh-ree) rocks, unlike the other two kinds of rocks, are formed on or near Earth's surface. They form from sediments eroded from other rocks. The sediments may come from igneous, metamorphic, or other sedimentary rocks.


Which is defined as a disturbance in matter that carries energy from one place to another?

Answers

an acoustic wave carries energy

A mechanical wave----

Other Questions
If you brought 20 apples for a 1.00 how much does one apple cost Solve these equations:1. 2(n+1)+1=(n-5)+(n-2)2. 3(n-1)-2=4(n-4)-(n-1) Find all whole values for y for which the double inequality is true:-528 What are the solutions to the equation? x2(x+2)(x+6)=0 Enter your answers in the boxes. x = or x = or x = Suppose 40 cars start at a car race. In how many ways can the top 3 cars finish the race? What is 344 to the 8th power 2/3=1.2/x solve for x Myra multiplies 5 integers. The product is negative. AT LEAST, how many of the integers must be negative? Which sentence expresses the main idea most precisely and clearly?A)The architect designed the plans for our school's new gymnasium.B)The guy who designs buildings made a sketch of our new gym at school.C)The architect was hired by the school to create a plan for a new gymnasium for our school.D)The architect that was secured to design the gym has finished his preliminary plans for a school gym to be constructed on our campus.2) You are giving a speech to local business leaders about supporting new sales tax laws. Which information is important to your audience?A)how the police are affected by the new lawsB)how the new laws will affect local business incomeC)how the laws will be enforced by the state or countyD)how the sales tax has been used historically in the US3)Who was William Shakespeare? Read the topic question about William Shakespeare. Which of these BEST explains why the topic is inappropriate for a short researched essay paper?A)too broadB)too narrowC)cannot be researched or provenD)requires personal opinion, no analysis or conclusions What were some of the uses the military made of audio/video technology through the 20th Century? (Select all that apply.)The Society of Motion Picture and Television Engineers was formed to improve the production of military training films.Sony invented the machine-gun microphone for the army to record spy conversations.Bell Labs invented digital coding in response to the fact that the Germans cracked the U.S. analog code.The navy performed the first transatlantic sound wave transmission to inform ships of incoming submarines. Evaluate the expression. 5^2 ( The two goes to the top) - 4 6 + 11 Who can solve and explain pleas .... A weather reporter in your area said that the speed of sound in air today is about one thousand one hundred feet per second. What is that speed in scientific notation? any help I would really appreciate it Please help ASAP. I'm stuck on this one question. >. i need help on a math problem. how do you solve 2.2=z-1.1? In Automation anywhere, for uploading a bot to the control room do we need to have access to it? what is the answer for this thing below? and how you've done it.[tex]8x - 9 = 8[/tex] the rectangle is the image after a dilation with the center of dilation at the origin of rectangle ABCD. The pre-image of A', point A, has coordinates of (4, 3.2). What is the scale factor of the dilation and what are the coordinates of point C? The scale factor is 2.5 and the coordinates of point C are (2.4, 0.8).The scale factor is 0.4 and the coordinates of point C are (2.4, 0.8).The scale factor is 2.5 and the coordinates of point C are (15, 5).The scale factor is 0.4 and the coordinates of point C are (15, 5). Which of the following best describes the climax of The Gift of the Magi? Della collapses on the couch because she doesnt have enough money for a gift. Della and Jim reveal their gifts to one-another. Madame Sofronie cuts Dellas hair. Della purchases a watch fob for Jim.