Define Aqua regia and write a short note on it

the answer is electrons

Final answer:

The subatomic particle with the least mass is the electron, having a mass of about 0.00055 amu, which is significantly lighter than both the proton (1.0073 amu) and the neutron (1.0087 amu).

Explanation:

When comparing subatomic particles such as electrons, protons, and neutrons, the electron is the particle with the least mass. Despite all three being crucial components of an atom, an electron has an extremely small mass compared to protons or neutrons. Specifically, the mass of an electron is about 0.00055 amu (atomic mass units), whereas a proton has a mass of approximately 1.0073 amu, and a neutron has a mass of about 1.0087 amu.

Protons and neutrons, collectively known as nucleons, have masses that are nearly identical. However, the neutron is very slightly more massive. The vast difference in mass between electrons and nucleons (protons and neutrons) means that almost all the atomic mass is concentrated in the atom's nucleus, not in the electrons that orbit it.

Answer:

=2023.04 grams

Explanation:

Magnetite reacts with hydrogen to produce Iron metal and steam. Steam instead of water is produced as the reaction occurs at temperatures above the boiling point of water.

Fe₃O₄ + 4 H₂ → 3 Fe +4 H₂O

From the equation, 1 mole of Fe₃O₄ reacts with 4 moles of H₂.

69.76 grams of H₂ has the following number of moles.

Number of moles= mass/RAM

=69.76/2

=34.88 moles.

The reaction ratio of Fe₃O₄ to H₂ is 1:4

Thus number of moles of magnetite= (1×34.88)/4

=8.72 moles.

Mass= moles × RAM

=8.72 moles × (56×3+16×4)

=2023.04 grams

Answer:

Ultraviolet light.

Hope this helps!

Ultraviolet light has a wavelength of 350 nanometers. Therefore, the correct option is option D.

The length between identical spots between two succeeding waves is known as the wavelength, which is a feature of waves. The wavelength of a wave is indeed the distance among one wave's peak (or trough) and the next. In mathematics, the Greek symbol lambda () is used to denote wavelength.

The colour of light is determined by its wavelength, and the pitch of sound is determined by its wavelength. The visible spectrum of light has wavelengths between around 700 nm (red) and 400 nm (violet). The range of audible sound wavelengths is roughly 17 mm to 17 m. Compared to visible light, audible sound has far longer wavelengths. Ultraviolet light has a wavelength of 350 nanometers.

Therefore, the correct option is option D.

To know more about wavelength, here:

https://brainly.com/question/12377285

#SPJ2

Answer:

B. Opening a door for someone who is carrying things

Answer:

(option D. with the proviso that the subscripts of propane's chemical formula must be corrected)

Explanation:

Propane is the saturated hydrocarbon, alkane, with chemical formula C₃H₈ or CH₃CH₂CH₃.

The complete combustion of the hydrocarbons yield carbon dioxide (CO₂) and water (H₂O).

The chemical equation that represents this combustion is:

Once you balance it, you get:

        Left side           Right side

C         3                          3

H         8                          4×2 = 8

O        5×2 = 10               3×2 + 4 = 10

That equation corresponds to the option D. of the list, with the proviso that the subscripts of propane's chemical formula must be corrected

Answer:

Here’s what I get.

Explanation:

Thus, the atomic number determines the identity of the element.

The atomic mass does not affect the chemical properties, so different isotopes of an element behave alike.

Hey there!:

Molarity of NaOH = 6 M or 6 mol/L

Volume of NaOH = 40 mL

Therefore , number of moles of NaOH:

40 mL  =( 6 mol / 1000 mL)*40=

6/ 1000 * 40 =>  0.24 moles of NaOH

Hope this helps!

The moles of NaOH will be 0.24 moles.

A mole would be defined as the quantity of a material that includes precisely 6.02214076 X 1023 of the particular chemical elementary entities.

Calculation of mole

Given data:

Volume = 40 ml

Molarity = 6M

Mole can be determined by using the formula:

Molarity = moles of solute / solution (L)

6 M = Moles of solute  ×1000/ 40

Moles of solute = 0.24 moles

Therefore, the moles of NaOH will be 0.24 moles.

To know more about moles

https://brainly.com/question/26416088

#SPJ2

Answer:

electron pairs, i just did it on APEX

Explanation:

Final answer:

In VSEPR theory, the elements that are repelled are electron pairs, which include both bonding pairs and lone pairs, dictating the molecular geometry.

Explanation:

The Valence Shell Electron Pair Repulsion (VSEPR) theory predicts the arrangement of electron pairs around each central atom in a molecule. According to this theory, electron pairs are oriented to be as far apart as possible to minimize repulsions. Therefore, the elements that are repelled in VSEPR theory are D. Electron pairs. These include both bonding electron pairs (shared between atoms to make covalent bonds) and lone pairs (non-bonding electron pairs).

In VSEPR theory, the repulsion between electron pairs is a key factor in determining the geometric structure of molecules. For example, in a water molecule (H₂O), the two lone pairs on the oxygen force the hydrogen atoms to adopt a bent arrangement rather than a linear one.

Answer:

(A) 50 °C

Explanation:

Ideal gas law:

PV = nRT

If pressure is held constant, then:

V₁ / T₁ = V₂ / T₂

Substituting values:

(5.30 kL) / (12 + 273 K) = (6.00 kL) / T

T = 323 K

T = 50 °C

Answer:

Option (A) 50 °C

Explanation:

Thinking process:

Let the volume of the hot air be [tex]V_{1}[/tex] 5.30 k l = 5 300 l = 5.3 m³

The initial temperature will be 12 ° (12 + 273.15) = 285.15 K

The later volume, [tex]V_{2}[/tex] = 6 Kl = 6 000 l = 6 m³

The equation will be:

[tex]\frac{P_{1}V_{1} }{T_{1} } = \frac{P_{2}V_{2} }{T_{2} }[/tex]

If the pressure is the same, then:

[tex]\frac{5.3}{285.15} = \frac{6}{T_{2} }[/tex]

Solving for [tex]T_{2}[/tex] gives:

T₂ = 322.8

   = 49.66

   = 50°

Answer:

chloroplast

Explanation:

chloroplasts

In plants, photosynthesis takes place in chloroplasts, which contain the chlorophyll. Chloroplasts are surrounded by a double membrane and contain a third inner membrane, called the thylakoid membrane, that forms long folds within the organelle.

Answer:

16.8 cups

Explanation:

We are given that there are 4.2 cups in in 1 liter of a liquid and we are to find out the number of cups that there will be in 4 liters.

To find this out, we will use the ratio method.

We know that:

1 L = 4.2 cups

So we can write it as:

[tex]\frac{1L}{4 L} =\frac{4.2 cups}{x}[/tex]

[tex] x = 4 .2 \times 4[/tex]

[tex] x = 1 6 . 8 [/tex]

Therefore, there are 16.8 cups in 4 liters.

Answer:

I water molexule

Explanation:

equat8n= 2NO3 + h2O =2 HNO3

Final answer:

Upon balancing the redox reaction NO3- → NO, we find that two water molecules (2 H2O) are required for balancing the reaction, ensuring both mass and charge conservation.

Explanation:

The reaction provided, NO3- → NO, is an unbalanced redox reaction. Balancing redox reactions involves ensuring that both the number of atoms of each element and the charge are balanced on both sides of the equation. Let's focus on the nitrogen and oxygen atoms first, and then balance the hydrogen atoms and the charges. After balancing, the fully balanced equation becomes:

NO3- + 2 H+ + e- → NO + 2 H2O

To confirm the balance, verify that there are equal numbers of nitrogen atoms and oxygen atoms on each side of the equation, as well as that the total charge is balanced. Here we can see that there are the same number of nitrogen atoms (1 on each side) and oxygen atoms (3 on the left, 1 in NO, and 2 in the 2 H2O molecules), which means the number of atoms is balanced. Additionally, the total charge on each side is also the same (-1 on the left side with the nitrate ion and the 2 extra positive charges from the hydrogen ions equaling +1, and 0 on the right side with NO being neutral and water having no charge).

Therefore, two water molecules (2 H2O) are required to balance this redox reaction.

Answer: option (A)

Explanation: The convection current is generates in the mantle due to the heat radiated from the core of the earth. Due to this convection current, the lithospheric plates moves as the upper part of the mantle known as the asthenosphere, is the region which is viscous in nature and drives the plates to move. This is a repeating cycle that constantly forces the plates to move.

Thus the correct answer is option (A).

Answer:

Mantle

Explanation:

Answer: there must be 64 g + 24 g = 88 g of carbon dioxide present after the reaction.

Explanation: Since the total mass of substances used up in the reaction must be equal to the amount of product formed, according to the conservation of mass law,

Answer:

[tex]\boxed{\text{3.6 atm}}[/tex]

Explanation:

For this question, we must use Dalton's Law of Partial Pressures:

The partial pressure of a gas in a mixture of gases equals its mole fraction times the total pressure:

[tex]p = \chi p_{\text{tot}}[/tex]

1. Calculate the number of moles of each gas.

[tex]n_{\text{CO}_{2}} = \text{35.07 g} \times \dfrac{\text{1 mol}}{\text{44.01 g}} = \text{0.7969 mol}\\\\n_{\text{H}_{2}\text{O}} = \text{27.93 g} \times \dfrac{\text{1 mol}}{\text{18.02 g}} = \text{1.550 mol}\\\\n_{\text{N}_{2}} = \text{12.64 g} \times \dfrac{\text{1 mol}}{\text{14.01 g}} = \text{0.9022 mol}\\\\n_{\text{He}} = \text{5.54 g} \times \dfrac{\text{1 mol}}{\text{4.003 g}} = \text{1.384 mol}[/tex]

2. Calculate the total moles

[tex]n_{\text{tot}} = \text{(0.7969 + 1.550 + 0.9022 + 1.384) mol = 4.633 mol}[/tex]

3. Calculate the mole fraction of helium

[tex]\chi = \dfrac{n_\text{He}}{n_{\text{tot}}} = \dfrac{\text{1.384 mol}}{\text{4.633 mol}}= 0.2987[/tex]

4. Calculate the partial pressure of helium:

[tex]p_{\text{He}} = \chi_{\text{He}} p_{\text{tot}}= 0.2987 \times \text{12 atm} = \textbf{3.6 atm}\\\\p_{\text{He}} = \boxed{\textbf{3.6 atm}}[/tex]

Answer:

The partial pressure of He = 3.97 atm

Explanation:

Given:

Mass of CO2 = 35.07 g

Mass of H2O = 27.93 g

Mass of N2 = 12.64 g

Mass of He = 5.54 g

Total pressure P = 12 atm

To determine:

The partial pressure of He

Calculation:

Based on Dalton's law, the partial pressure of a gas can be expressed as a product of its mole fraction and the total pressure

[tex]P(gas)=X(gas)*P(total)-----(1)[/tex]

where X(gas) = mole fraction

[tex]X(gas)=\frac{moles(gas)}{moles(total)}----(2)[/tex]

[tex]Moles(CO2)=\frac{mass(CO2)}{mol.wt.(CO2)}=\frac{35.07g}{44g/mol}=0.7970[/tex]

[tex]Moles(H2O)=\frac{mass(H2O)}{mol.wt.(H2O)}=\frac{27.93g}{18g/mol}=1.552[/tex]

[tex]Moles(N2)=\frac{mass(N2)}{mol.wt.(N2)}=\frac{12.64g}{28g/mol}=0.4514[/tex]

[tex]Moles(He)=\frac{mass(He)}{at.wt.(He)}=\frac{5.54g}{4g/mol}=1.385[/tex]

Therefore:

Moles of He = 1.385

Total moles = 0.7970+1.552+0.4514+1.385 =4.188

Substituting the appropriate values in equation (1) gives:

[tex]P(He)=X(He)*P(total)[/tex]

[tex]P(He)=\frac{1.385}{4.188}*12 atm = 3.97 atm[/tex]

When atoms combine to form molecules, a chemical change has occurred as there is a chemical reaction involved.

What is a chemical change?

Thus, a chemical change takes place when atoms combine to form molecules.

To know more about chemical change, refer to the below link:

https://brainly.com/question/11887539

#SPJ2

Answer:

I think B..

Explanation:

It is the sharing of electrons from one atom to another .

Answer:

The answer is b: It is the sharing of electrons by overlapping orbitals

Explanation:

The ionic bong involves the exchange of electrons from one atom to another to keep eight particles in their outermost orbit. In this way the atoms become stable.  This happens between a metal, which losing electrons becomes a cation that now has a positive charge, and a non-metal, which accepting electrons becomes an anion that now has a negative charge. So the ionic bond is the electrostatic attraction between oppositely charged particle (cation and anion).

No chemical bond involves sharing neutrons between two nuclei. Chemical bonds occur between the electrons of atoms, which are found in the outer layer around the nuclei.

So, the correct answer is b: It is the sharing of electrons by overlapping orbitals.  This happens between two non-metallic elements.

The answer is a column.

Answer:

mechanical energy

Answer:

0.15365144685714319697163388678739

Explanation:

1 mole is equal to 6.022^23 somethings (anything) since a mole is a way of representing the amount of somethings. Using avogadro's number rounded to the thousandth's place (you can look up a more specific version) you divide 132... by 6.022^23 to get the amount of moles.

Weight training has the biggest effect on skeletal muscles.

A muscle fibre is another term for a single skeletal muscle cell, which is not the same as skeletal muscle. The many muscle fibres that make up skeletal muscles are bound together by connective tissue. The contraction of each muscle fibre, which is made up of a single multinucleated cell, results in force and movement.

A specific form of cell called a muscle fibre sometimes referred to as a myofiber or muscle cell, is what gives skeletal muscles their shape. Long, cylindrical cells called muscle fibres make up a muscle's length and are bound together by connective tissue. Since they have several nuclei, they are multinucleated cells, which may contract to provide force and movement.

To know more about skeletal muscles here

https://brainly.com/question/31182318

#SPJ12

Answer:

Explanation:

The equation of this equilibrium reaction is shown below:

     CH₄ + 2H₂S ⇄ CS₂ + 4H₂

All the gases in this reaction are in a gaseous phase.

When gases are in equilibrium with one another, we can make some comments about their particles, concentration and reaction rate.

For the particles:

The magnitude of the kinetic energy here is very great according to the kinetic theory of matter. This is because the particles are in a uniform gaseous phase.

In terms of concentration

When dealing with gases in equilibrium, we talk more of the concentration with regards to pressure. Pressure is equivalent to concentration when we consider gaseous reactions. An increase in pressrue is like applying a stress to the system. Based on Le Chatelier's principle, increase in pressure favors the side with smaller volume:

                       CH₄             +         2H₂S           ⇄ CS₂        + 4H₂

                        3 moles of gases                          5 moles of gases

Increase in pressure will favor the reactant side.

Reaction rate

The rate at which this reaction will proceed would be very fast. This is because gases have the fastest rate of reaction. The equilibrium will quickly be reached.

Answer:

Mutual coagulation takes place

Explanation:

Leather gets hardened after tanning​ because mutual coagulation takes place.

Answer:

3626.76dm³

Explanation:

Given parameters:

Number of moles of Nitrogen in tank = 17moles

Temperature of the gas = 34°C

Pressure on the gas = 12000Pa

Unkown:

Volume of the tank, V =?

Converting the parameters to workable units:

We take the temperature from °C to Kelvin

K = 273 +  °C  = 273 + 34 = 307k

Taking the pressure in Pa to atm:

101325Pa = 1atm

12000Pa = 0.118atm

Solution:

To solve this problem, we employ the use of the ideal gas equation. The ideal gas law combines three gas laws which are the Boyle's law, Charles's law and the Avogadro's law.

            It is expressed as PV = nRT

The unknown is the Volume and we make it the subject of the formula

             V = [tex]\frac{nRT}{P}[/tex]

Where R is called the gas constant and it is given as 0.082atmdm³mol⁻¹K⁻¹

Therefore  V = [tex]\frac{17 x 0.082 x 307 }{0.118}[/tex] = 3626.76dm³

Answer: The volume of nitrogen will be 3614.15 L

Explanation:

To calculate the number of moles, we use the equation given by ideal gas equation:

[tex]PV=nRT[/tex]

Or,

[tex]PV=\frac{m}{M}RT[/tex]

where,

P = pressure of the gas = 12000 Pa = 12 kPa    (Conversion factor: 1 kPa = 1000 Pa)

V = Volume of gas = ?

n = number of moles of nitrogen = 17 moles

R = Gas constant = [tex]8.31\text{L kPa }mol^{-1}K^{-1}[/tex]

T = temperature of the gas = [tex]34^oC=[34+273]=307K[/tex]

Putting values in above equation, we get:

[tex]12kPa\times V=17mol\times 8.31\text{L kPa }mol^{-1}K^{-1}\times 307K\\\\V=3614.15L[/tex]

Hence, the volume of nitrogen will be 3614.15 L

Answer:

D

Explanation:

there is no explanation, I researched the topic

Energy, Temperature, and Changes of State

Matter either loses or absorbs energy when it changes from one state to another. For example, when matter changes from a liquid to a solid, it loses energy. The opposite happens when matter changes from a solid to a liquid.

Answer:

D)A coil of a toaster glowing when the toaster is switched on

Explanation:

A coil of a toaster glowing when the toaster is switched on  is an example of chemical energy changing into radiant energy.

The toaster is turning into radiant energy because it is getting warmer and cooking.

Answer:

Explanation:

The reaction you are looking for is

hydrocarbon + O2 ====> nCO2 + mH20

in the simplest form.

You have a piece of wood. You burn it. There is going to be a chemical change.

Both heat and light are produced. (radiant energy)

The second best answer is D because you do get radiant energy.

The reaction requires 15 moles of O2, which equates to 9.03 * 10^24 molecules, to react with 3 moles of P4.

To calculate the number of O2 molecules required in this reaction, we refer to the stoichiometric coefficients in the balanced chemical equation. Looking at the equation, we can see that 1 mole of P4 reacts with 5 moles of O2 to produce 2 moles of P2O5. Therefore, 3 moles of P4 would require 3*5=15 moles of O2. To convert moles to molecules, we have to multiply by Avogadro's number (6.022 * 10^23) because there are that many molecules in one mole. Therefore, 15 moles of O2 would equate to 9.03 * 10^24 molecules of O2.

https://brainly.com/question/34137415

#SPJ3

Answer:

When the Keq value is large, the number representing [A]a[B]b must be smaller than the number representing [C]c[D]d. This relationship means that the products must be favored and that the mixture at equilibrium is largely products.

Explanation:

aA + bB ⇄ cC + dD,

Keq = ([C]^c x [D]^d)/([A]ᵃ[B]ᵇ),

So, When the Keq value is large, the number representing [A]a[B]b must be smaller than the number representing [C]c[D]d.

So, This relationship means that the products must be favored and that the mixture at equilibrium is largely products.

Answer:

1.smaller

2.products

3.products

Explanation: