Dr. Sperry, a biologist, is using Excel to track growth rates of different populations of bacteria. She has a very complex formula in one cell. It begins with “ROUND”. Dr. Sperry would like to see exactly how Excel’s calculation reached the final rounded value that she sees in the cell.

Answers

Answer 1
by using the evaluate formula dialog box

Related Questions

The icons to insert footnotes and endnotes in a document are located in the _____ tab.

Answers

Answer:

Answer: Reference

Explanation:

10. Blender® allows users to duplicate an object simply by selecting it and pressing duplicate on the toolbar (shift+D). (1 point)

true

false



11. According to the unit, which of the following is an important first step in any creative endeavor? (1 point)

pre-production

post-planning

delegating tasks

sending emails

Answers

10. Blender® allows users to duplicate an object simply by selecting it and pressing duplicate on the toolbar (shift+D).
True

11. According to the unit, which of the following is an important first step in any creative endeavor?
pre-production

Hope this helps.

Write code to complete doublepennies()'s base case. sample output for below program: number of pennies after 10 days: 1024 note: these activities may test code with different test values. this activity will perform three tests, with startingpennies = 1 and userdays = 10, then with startingpennies = 1 and userdays = 40, then with startingpennies = 1 and userdays = 1. see "how to use zybooks". also note: if the submitted code has an infinite loop, the system will stop running the code after a few seconds, and report "program end never reached." the system doesn't print the test case that caused the reported message.

Answers

int resultPennies = startingPennies;
for (int i = 0; i < userDays; i++) {
    resultPennies *= 2;
}
return resultPennies;


The above code should do. You will need to adapt this code to your desired language, as you never specified a language.

After pasting data, what can be done to access more options for how to paste it? You can change the formatting in the original cell that was copied. You can move the pasted data to a new location. You can add a formula to the data that was pasted. You can click the smart tag that pops up after pasting.

Answers


You can click the smart tag that pops up after pasting.


♣Amaranthine

When you ____ software, you are adapting it from one type of computer or operating system to run on a different computer or operating system?

Answers

Answer: Port

Explanation :

When we port a software from one computer to another computer or from one operating system to another operating system, it tries to adapt to the new environment of the machine by checking the required the configurations of the machine and then checking the available files in the software to run the machine.

The porting of a software also checks whether the software is compatible with the machine or not and if not then why.

Write a program that asks the user for the name of a text file. the program should display the last 10 lines of the file on the screen

Answers

The only thing that I know is that after you input the text file, it could either:
-save those lines as a variable
-display the text file
However any more would be dependent on the language.

Ipv6 includes a native information security framework (ipsec) that provides both data and control packets. true false

Answers

The statement that IPv6 includes a native information security framework (IPsec) that provides both data and control packets is false.
IPSec is a mandatory component for IPv6, and is used to natively protect IPv6 data as it is sent over the network,. and not control packets.
The IPv6 IPSec is a set of Internet standards that uses cryptographic security services to provide confidentiality ,data origin authentication and data integrity


Which terms describes a distributed data protection technology that leverages deep analysis, context evaluation, and rules configured from a central console to ensure confidential information remains secure while in use, in transit, and at rest? anti-forensics information technology infrastructure library (itil) digital forensic techniques data leakage prevention (dlp)?

Answers

The term Data leakage prevention (DLP) describes a distributed data protection technology that leverages deep analysis, context evaluation, and rules configured from a central console to ensure confidential information remains secure while in use, in transit, and at rest.
DLP is set of technologies aimed at stemming the loss of sensitive or critical information that occurs in enterprises, it prevents end users not to send such information outside of the corporate network. 

Blender questions
8. When adding objects, remember the object will always be placed at the position of the 3-D curser, so if the curser is off screen the object will also appear off screen. (1 point)

true

false



9. The 3-D curser is a powerful tool and a pivot point for all transformation. (1 point)

true

false

Answers

Blender questions
8. When adding objects, remember the object will always be placed at the position of the 3-D curser, so if the curser is off screen the object will also appear off screen. (1 point)

true

false

The correct answer is:
true



9. The 3-D curser is a powerful tool and a pivot point for all transformation. (1 point)

true

false

The correct answer is:
true

You will transform the program that was written to play a letter guessing game (project 2) to an object-oriented program.general requirements for project 3rewrite the program from project 2 using at least one class "game", which has three member functions.all member functions will be defined asfollows:othe function prototype appears in the classdefinitionocomment describing what the function does appears directly under function prototype formal variable names are not used in any prototype the functions definition appears after themainthe first member functionis a custom constructor (to set the member variables), which receives two parameters: the first parameter is a character (the character to be guessed in that game); and the second parameter is an integer that specifies the maximum number of attempts that can be made in thegame.(the number of attempts ranges between 4 and 7 -inclusive-, this number is randomly generated in the main function using the "rand" function, you have to seed the random number generator).

Answers

We need to program from the project to even solve this.

"​a(n) __________ app such as kindle is specifically designed to run on a specific platform and device.""

Answers

native app such as kindle is specifically designed to run on a specific platform and device.  The Kindle app puts millions of books at your fingertips. It’s the app for every reader, whether you’re a book reader, magazine reader, or newspaper reader—and you don’t need to own a Kindle to use it. Native apps are installed through an application store (such as Google Play or Apple's App Store). They are developed specifically for one platform, and can take full advantage of all the device features

When powering up the computer, the initial program loading and start-up is performed by using a ______________ program that is built permanently into a read-only part of memory for the computer?

Answers

Answer:

The answer is Bootsrap

Explanation:

A bootstrap program which is also referred to as a bootstrap loader is a program that resides in the computer’s Read Only Memory. It starts the whole chain reaction and ends up with the entire OS being loaded. This program reads the computer’s hard drive boot sector and continues with the process of loading the Operating System. It first performs a POST test and then proceeds to load the OS intothe main memory.

Naomi is giving a presentation on historical figures. She has all the pictures of the people she wants to talk about. After each picture, she wants to write a summary of the accomplishments of each person. Which represent the process for making her presentation?

A Click on File/Disk, select all pictures using the Shift key, and select New Text Box after each person.
B Click on New Text Box, select File/Disk, select a picture, then repeat for each one.
C Click on File/Disk, select each picture, then add captions to each slide.
D Click on New Text Box, select all pictures using the Shift key, then add captions to each slide.

Answers

The answer would be A. The most efficient way is putting all the pictures on the presentation first and then just put a new text box after each picture and then just repeat the process for all the pictures. 

A stack queue can be implemented as a circular array stack dynamic linked list dynamic vector none of these

Answers

The answer is circular array.  A stack queue can be implemented as a circular array .  This data structure is also known as Circular buffer.  Circular array is a data structure that used a array as if it were connected end-to-end. It is to insert and remove items from a queue from time to time. The idea of a circular array is that the end of the array “wraps around” to the start of the array.

Two technicians are discussing passive-type wheel speed sensors. technician a sys that wheel speed sensors are magnetic. technician b says that the toothed sensor ring is magnetic. which technician is correct?

Answers

I'd say (A) Technician A


Wheel speed sensors are a necessary sensor input and ABS component. The conventional wheel speed sensor consists of a magnetic pin with copper wire wrapped around to create a magnetic field. The purpose of the toothed metal ring is to pass through the sensor’s magnetic field. The sensor changes polarity as the metal ring passes through.





How many amps are in a 3v battery?

Answers

in a 3 volt battery, there is 1 amp

Which algorithm, developed by george dantzig and utilized by excel solver, is effective at investigating extreme points in an intelligent way to find the optimal solution to even very large linear programs?

Answers

The answer is the Simplex Algorithm.  The Simplex Algorithm developed by george dantzig and utilized by excel solver, is effective at investigating extreme points in an intelligent way to find the optimal solution to even very large linear programs.  It is is a popular algorithm for linear programming.

The appendices are for non-essential information—such as maps, charts, and graphs—that support your points but are not necessary to explain them. 

true
false

Answers

The answer is True.  The appendices are for non-essential information—such as maps, charts, and graphs—that support your points but are not necessary to explain them. 

Answer:

True

Explanation:

edge 2022

Write a program that reads three numbers and prints "increasing" if they are in increasing order, "decreasing" if they are in decreasing order, and "neither" otherwise. here, "increasing" means "strictly increasing", with each value larger than its predecessor. the sequence 3 4 4 would not be considered increasing

Answers

You could assign values to variables and break it up into if else-if else statements.

Pseudocode:

if a < b and b < c:
    print("increasing")

else if a > b and b > c:
    print("decreasing")

else:
    print("neither")

Hope this helps.

Following are C++ programs to input value and print the message.

Program Explanation:

Defining header file.Defining the main method.Defining integer variable "a,b,c" that uses the input method to the input value.Defining if block that checks first variable value is less than second and third value, if it's true it will print "increasing" as a message.Defining else if block that checks second variable value is greater than first and third value, if it's true it will print "decreasing" as a message. In the else block, it will print the "neither" as a message.

Program:

#include <iostream>//header file

using namespace std;

int main()//main method

{

   int a,b,c;//defining integer variable

   cout<<"Enter numbers: "<<endl;//print message

   cin>>a>>b>>c;//imput value

   if (a < b && a < c)//using if block that check first variable value is less than second and third value

   {

   cout<<"increasing";//print message

   }

   else if(b>a&&b>c)//using else if block that check second variable value is greater than first and third value

   {

   cout<<"decreasing";//print message

   }

   else//else block

   {

   cout<<"neither";//print message

   }

   return 0;

}

Output:

Please find the attached file.

Learn more:

brainly.com/question/13143685

One key criterion for selecting social networks is the number of daily visitors to the website. when comparing linkedin traffic to facebook traffic, we find that linkedin has ____ unique daily visitors when compared to facebook.

Answers

Answer could be

- Considerably Less
- Significantly Less

But the audience for linked although without argue facebook has the bigger traffic between the two social network sites, but linkedin's targe audience are professionals to help build professional network, it may be similar in the sense of platform with facebook but the objective for the two social network sites are very different.

What is the characteristics of a spear phishing message

Answers

It is targeted at one person specifically. More work for the attacker, but higher chances of obtaining sensitive information.

pear phishing is a variation on phishing in which hackers send emails to groups of people with specific common characteristics or other identifiers. Spear phishing emails appear to come from a trusted source but are designed to help hackers obtain trade secrets or other classified information.

The ____ system is an information system with a telephony interface that can be used to automate the alert process.

Answers

The answer is auxiliary phone alert and reporting system.  
The auxiliary phone alert and reporting system is an information system with a telephony interface that can be used to automate the alert process.  It is an automated system for activating the alert roster.

I am having trouble with logic gates(AND NOR,etc)
Can someone give me some advice to remember most logic gates

Answers

Logic gates take boolean input(s) and returns boolean output(s).

OR gate:
Two inputs, output is true if at least one input is 1.

AND gate:
Two inputs, output is true if both inputs are 1.

NOT gate:
One input, output is the reversed bit; 0 -> 1, 1 -> 0.

NAND gate:
Essentially a "Not AND" gate. The reverse of the AND gate.

NOR gate:
Essentially a "Not OR" gate. The reverse of the OR gate.

XOR gate:
Similar to an OR gate, outputs 1 if only one input is one.


These can be understood a lot better by looking at their respected truth tables.

A logic gate is an elementary building block of a digital circuit. Most logic gates have two inputs and one output. At any given moment, every terminal is in one of the two binary conditions low (0) or high (1), represented by different voltage levels.

There are seven basic logic gates: AND, OR, XOR, NOT, NAND, NOR, and XNOR.

The AND gate is so named because, if 0 is called "false" and 1 is called "true," the gate acts in the same way as the logical "and" operator. The following illustration and table show the circuit symbol and logic combinations for an AND gate. (In the symbol, the input terminals are at left and the output terminal is at right.) The output is "true" when both inputs are "true." Otherwise, the output is "false."

The OR gate gets its name from the fact that it behaves after the fashion of the logical inclusive "or." The output is "true" if either or both of the inputs are "true." If both inputs are "false," then the output is "false."

he XOR ( exclusive-OR ) gate acts in the same way as the logical "either/or." The output is "true" if either, but not both, of the inputs are "true." The output is "false" if both inputs are "false" or if both inputs are "true." Another way of looking at this circuit is to observe that the output is 1 if the inputs are different, but 0 if the inputs are the same.

 

The NAND gate operates as an AND gate followed by a NOT gate. It acts in the manner of the logical operation "and" followed by negation. The output is "false" if both inputs are "true." Otherwise, the output is "true."

The NOR gate is a combination OR gate followed by an inverter. Its output is "true" if both inputs are "false." Otherwise, the output is "false."

The XNOR (exclusive-NOR) gate is a combination XOR gate followed by an inverter. Its output is "true" if the inputs are the same, and"false" if the inputs are different.


What two types of icmp messages are received at the sending host executing the traceroute program?

Answers

Port unreachable and TTL (Time to Live) Expired messages are received at the sending host.

In cases when a packet reaches an end-host destined for a UDP port for which no host is associated, it generates an ICMP port unreachable in response. Also, an ICMP Port unreachable message can be generated in instances where the router could not find the server.

TTL expired on the other hand is used upon the execution of traceroute command. An ICMP message is sent out with a TTL value of 1 set in the IP header. The end host receiving a traceroute probe would send a TTL Expired ICMP when a single probe finally reaches it.






Final answer:

The "Time Exceeded" and "Destination Unreachable" messages are two types of ICMP messages received by a host running traceroute when a packet's TTL expires or the packet cannot be delivered.

Explanation:

The two types of ICMP messages received at the sending host executing the traceroute program are "Time Exceeded" messages and "Destination Unreachable" messages. The "Time Exceeded" message is received when a packet's time-to-live (TTL) value has reached zero before reaching its destination, prompting the intermediary router to send this message back to the source. The "Destination Unreachable" message is sent back if, for some reason, the packet could not be delivered to the destination host or if a communication port is not available.

More efficient distribution systems around the world have led to

Answers

An increase in world trade? What are my options?

What decimal number does the bit pattern 0×0c000000 represent if it is a two's complement integer?

Answers

The answer is 201326592.  The decimal number that the bit pattern 0×0c000000 represent if it is a two's complement integer is 201326592.  

The hexadecimal two's complement integer 0x0C000000 represents the decimal number 12.

To determine what decimal number the bit pattern 0x0C000000 represents as a two's complement integer, we first need to interpret the hexadecimal number in binary. The given pattern 0x0C000000 in binary is 00001100 00000000 00000000 00000000. This is a 32-bit binary number where the most significant bit (MSB) is 0, suggesting that the number is positive in two's complement representation.

Starting from the left, the first non-zero byte is 00001100. We convert that to decimal by calculating each bit's value based on its position. So it is 0\u00D72\u207F + 0\u00D72\u207E + 0\u00D72\u207D + 0\u00D72\u207C + 1\u00D72\u00B3 + 1\u00D72\u00B2 + 0\u00D72\u00B9 + 0\u00D72\u2070 = 8 + 4 = 12. Since the MSB is 0, we keep the number positive, therefore the decimal representation of 0x0C000000 is 12.

What is the maximum number of characters that can be used in a windows password?

Answers

This ones tricky.
Assuming your windows 10, it's 16 characters but you can type up to 127.

Windows 2000 / XP / Server 2003: Technical limit is 127 characters. Password change dialog limits to 32 characters. If 14 or less characters are used, the old LanMan hash is used. If 15 or more are used, the newer NTLM hash is used.

You have a subnetwork, 192.168.48.0/24. it is divided into subnet a and subnet
b. your boss wants to add a third subnet, c, with 16 hosts. is this possible? if yes, provide the network address of the new subnet you will be adding (i.e. 192.168.2.14). if it is not possible, select 'no' as your answer.

Answers

Final answer:

It is possible to add a third subnet that supports at least 16 hosts to the existing network. This would typically require a subnet mask of /28. The exact network address of the new subnet depends on the addresses occupied by subnets A and B.

Explanation:

Yes, it is possible to add a third subnet, C, with 16 hosts to the existing network of 192.168.48.0/24 which is divided into subnet A and subnet B. To accommodate a third subnet that supports at least 16 hosts, you would need to allocate enough IP addresses while considering the subnet mask that allows for 16 usable addresses. For 16 hosts, you would need a subnet mask of /28 (which provides 16 addresses, 14 of which are usable for hosts as one is the network address and another is the broadcast address).

Assuming subnets A and B are already optimized and taking the first available spaces, the third subnet, C, could start immediately after the space used by subnet B. Without specific details about subnets A and B’s size, calculating the exact starting address of C is not possible, but the pattern would be akin to 192.168.48.x/28, where 'x' is the next available byte following subnet B.

What part of the computer that provides the internet to the computer

Answers

A modem (modulator–demodulator) is a network hardware device that modulates one or more carrier wave signals to encode digital information for transmission and demodulates signals to decode the transmitted information.

Students already familiar with a web-connected world will feel immediately at home with Google Classroom.
What benefits will they enjoy from their assignments going online? (Select 3 answers.)

If students are sick from school they can cancel pending assignments from home using the Cancel button
Students can see at a glance when assignments are due
Students can choose to have assignment results sent direct to their phone as a text message
Students can discuss assignments in a collaborative environment
Students can view each other's assignments if they need ideas
Assignments and resources are kept organized in one place

Answers

selections (going in order)  2 3 and 5

The benefits that they will enjoy from their assignments going online are

2. Students can see at a glance when assignments are due.

3. Students can choose to have assignment results sent directly to their phone as a text message.

5. Students can view each other's assignments if they need ideas.

What are online assignments?

You can contact instructors who can help you comprehend your assignment assignments through online assignment help services. Additionally, they can offer you critique on your essays and papers, as well as assistance with test and quiz preparation.

The Internet makes it simple to organize and supervise homework assignments using online tools. Teachers can better grasp any challenges their pupils may be having by giving them online tasks. This makes it simpler for teachers to evaluate students' performance on online homework.

Therefore, the correct options are 2, 3, and 5.

To learn more about online assignments, refer to the link:

https://brainly.com/question/28283249

#SPJ2

Other Questions
The purpose of pull taxes in the southern states was to Cell theory was discovered and advanced because of the development of which instrument?A)telescopeB)gyroscopeC)light microscopeD)electron microscope Which factor can cause a noninfectious disease fungus virus bacteria environment? The sum of the squares of two consecutive positive even integers is 100. find the two integers Roy borrows $42,000 to purchase a new truck. How much will Roy need to pay in all if the interest is compounded annually at 3.5% for 10 years? (5 points) $43,125.00 $63,624.00 $59,245.15 $51,709.00 Cicero and Seneca introduced ideas of a successful government, including popular sovereignty, which means: Find the new concentration of a solution if 25.0 mL of water is added to 125.0 mL of 0.150 M NaCl solution. What is the final volume? mL The _____ proposes that the emotion we experience is influenced by feedback from facial muscles or skin. facial network proposal feedback principle physiological-feedback initiative facial feedback hypothesis Seventeen years after this vote and this article, Japan attacked the united states at pearl harbor. is there a possible connection between the immigration quota act of 1924 and pearl harbor? What are three reasons children may experience speech difficulties? Which box plot represents the data? 30, 35, 25, 5, 5, 25, 40, 45, 50, 10, 15, 40 The endpoints of a line segments are at the coordinates (-6,3,4) and (4,-1,2) what is the midpoint of the segment Measuring the Orbital Speeds of PlanetsIntroductionA Boeing 747 can fly 624 miles per hour. Thats pretty fast! Right now, Earth and other objects in thesolar system are orbiting the Sun, but how fast are these objects moving? In this assignment, you willcalculate the orbital speeds of objects in our solar system.Part A: Planetary PeriodsIn the 1600s, Johannes Kepler discovered three laws that govern the motion of objects around the sun.Keplers first law explains that objects travel in an elliptical, or oval-shaped, path around the sun.Keplers second law explains that an object travels faster in its orbit when it is closer to the Sun andslower in its orbit when it is farther away. In this activity, you will investigate Keplers third law: therelationship between an objects distance from the sun and the time it takes the object to complete anorbit around the sun.Access the Gizmo from within today's lesson. The exploration guide found within this simulation willhelp you work through the Gizmo. Click on the Lesson Materials link, which appears on the top leftcorner of the screen once you enter the simulation, to access the student exploration sheet. Use it asyou work through Activity C and answer all parts.Part B: Calculating Orbital SpeedEvery object moves at a different average speed in its orbit around the Sun. In this activity, you will usedata collected from Part A to calculate the average orbital speeds of each planet and of Pluto.1. Recall that the path an object takes around the Sun is an ellipse, and not a circle. However, toapproximate the circumference, or length, of each orbit, you will treat the orbits as circles. Goback to your notes in your student exploration sheet from Part A. Using the mean orbital radius(R) that you recorded, calculate the circumference of each planets orbit and record it in thetable below. Use the following formula to calculate the circumference:Circumference 2 = r2. Using the periods you recorded in your student exploration sheet and the circumference of orbitthat you just calculated, calculate the average orbital speed of each planet and record it in thetable below. Use the following formula to calculate speed:Distance Circumference Average Orbital Speed Time Period = =The units of your answer will be in AU/year.3. To give you a better perspective of how fast these orbital speeds really are, convert the orbitalspeeds you just calculated from AU/year to miles/hour. 1 AU/year = 10,604 miles/hour. Recordyour answers in the table below.TableObjectMeanorbitalradius (AU)(copy from#6 in part A)Circumference ofOrbit (AU)Period(EarthYears)(copyfrom #6in partA)Orbital Speed(AU/year)Orbital Speed(miles/hour)MercuryVenusEarthMarsJupiterSaturnUranusNeptunePlutoDrawing Conclusions4. Which planet takes the longest amount of time to travel once around its orbit? Which planettakes the shortest amount of time?5. How does an increase in orbital radius affect average orbital speed?ExtensionperihelionIn astronomy, the term refers to the point in the orbit of an asteroid, comet, or planet atwhich it is closest to the sun. Aphelion refers to the point at which the object is furthest away from thesun. Research facts about the dwarf planet Ceres. Calculate the average orbital speed of Ceres inmiles/hour when it is closest to the sun and when it is farthest away. The equilibrium constant for the reaction sr(s) + mg2+(aq) sr2+(aq) + mg(s) is 3.69 1017 at 25c. calculate e o for a cell made up of sr / sr2+ and mg / mg2+ half-cells. How did a move toward mercantilism strengthen royal power?a. by increasing the amount of a nations importsb. by allowing nobles to control taxationc. by creating colonies that supported the kingd. by ensuring more economic prosperity for the merchant and middle classes According to abraham maslow, people are motivated by: question 3 options:a.optimal arousal.b.drive reduction.c.a hierarchy of needs. and) instincts. Without the skeletal system, the body could not fight off infection. Please select the best answer from the choices provided. T F During the 1950's, the typical suburban male was all of the following except white, young, blue-collar, or married with children? What layer of the rainforest do gliding leaf frogs live in? Francesca is in junior high, and her parents have decided to divorce, due to a high-conflict marriage. despite the difficulty of adjusting, francesca may be better off because children in high-conflict intact families ____________ than children in divorced families.