Electromagnetic radiation of 5.16Ă—1016 Hz frequency is applied on a metal surface and caused electron emission. Determine the work function of the metal if the maximum kinetic energy (Ek) of the emitted electron is 4.04Ă—10-19 J.

Answer:

k = 86,646,076.92 J

Explanation:

We know that:

K = [tex]\frac{1}{2}IW^2[/tex]

where K is the kinetic energy, I is the moment of inertia and W is the angular velocity.

First we have to find the I with the equation:

I = [tex]\frac{1}{2}MR^2[/tex]

where M is the mass and R the radius of the cylinder.

so:

I = [tex]\frac{1}{2}(507 kg)(1.2m)^2[/tex]

I = 365.04 kg*m^2

Now we replace all the data in the first equation as:

K = [tex]\frac{1}{2}IW^2[/tex]

K = [tex]\frac{1}{2}(365.04)(689)^2[/tex]

k = 86,646,076.92 J

The projectile reaches a maximum height of 26.4 m.

The question is demanding us to find the;

i) Time of flight:

T = 2usinθ/g

u = initial velocity

θ = angle of projection

g = acceleration due to gravity

T = 2 × 30.0 × sin 50.0°/10

T = 4.6 s

ii) The range;

R = u^2sin2θ/g

R = (30.0)^2 × sin 2( sin 50.0°)/10

R = 88.6 m

ii) The maximum height;

H = u^2sin^2θ/2g

H =  (30.0)^2 × sin^2(50.0°)/2 × 10

H = 26.4 m

Learn more: https://brainly.com/question/2510654

Answer:

Paleoclimate proxies

Explanation:

Paleoclimate proxies are materials which are preserved and which can be analysed and correlated with parameters that relates to the environment and climate change. These materials are physical, biological or chemical and are preserved in paleoclimate archives

Scientists always seek clues from paleoclimate archives to understand how climate varied over the recent past few millions of years

Answer:

Explanation:

This means that the ratio of the speed of the incident beam of light in a vacuum to the speed of light in the glass is 1.5

This means that the speed of light in vacuum is 1.5 times the speed of light in flint glass.

Answer:Misses the Target

Explanation:

Given

Distance between window and Professor is h=11 m

she dropped the balloon 2 sec earlier

time taken by balloon to cover the 11  m

using

[tex]h=ut+\frac{at^2}{2}[/tex]

where h=height

u=initial velocity

t=time

a=acceleration

[tex]11=0+\frac{9.8t^2}{2}[/tex]

[tex]t=\sqrt{\frac{2\times 11}{10}}[/tex]

[tex]t=\sqrt{2.2}[/tex]

[tex]t=1.483 s[/tex]

Therefore she misses the Professor by 0.51 s

Final answer:

The water balloon will hit the ground before the professor is directly underneath the window since it takes approximately 1.48 seconds to fall 11 meters, which means the student is unlikely to hit the professor.

Explanation:

The student's question involves calculating the time it takes for a water balloon dropped from a height to hit a target. This is a problem in projectile motion and free fall within the context of physics, specifically under the topic of mechanics. As the professor is 2 seconds away from the point directly below the student's window, which is 11 meters above the sidewalk, we can determine if the balloon will hit the target by calculating how long it takes for the balloon to reach the ground.

Using the equation of motion for free fall s = 1/2gt^2, where g is the acceleration due to gravity (approximated to 10 m/s^2), and s is the distance (11 meters), we can solve for t (time): s = 1/2gt^2 implies t = sqrt(2s/g). Substituting the given values, we get t = sqrt(2*11/10), which gives t = sqrt(2.2), or approximately t = 1.48 seconds. Because the professor is 2 seconds away from being underneath the window, the water balloon will hit the ground before the professor reaches the point below the student's window, meaning the student's attempt to hit the professor with the balloon will likely fail unless the professor's speed changes.

The speed of the mass when moving through the equilibrium point is 1.22 m/s.

But before that the angular frequency is

[tex]= \sqrt{\frac{80}{0.4} }[/tex]

= 14.14 rad/s

Now

The mass speed should be

[tex]= 14.14 \sqrt{(0.10)^2 - (0.05)^2}[/tex]

= 1.22 m/s

Learn more about the mass here: https://brainly.com/question/16030328

The speed of a 0.40-kg mass moving through the equilibrium point in simple harmonic motion with a spring constant of 80 N/m and an initial displacement of 0.10 m is 2 m/s.

The speed of the mass when moving through the equilibrium point in a scenario of simple harmonic motion can be determined using the formula for the maximum speed of an object in simple harmonic motion. This formula is v = √(k/m) * A, where v is the speed, k is the spring constant, m is the mass, and A is the amplitude, which in this case is the initial displacement of the object from equilibrium.

So, to calculate the speed of this 0.40-kg mass with a spring constant of 80 N/m as it passes through equilibrium, we plug those values into the formula:

v = √[(80 N/m) / (0.40 kg)] * (0.10 m) = 2 m/s.

https://brainly.com/question/28208332

#SPJ11

Answer:

Explanation:

Actual weight, Wo = 5 N

Apparent weight, W = 4.5 N

density of water = 1 g/cm^3 = 1000 kg/m^3

density of gold, = 19.32 g/cm^3 = 19.32 x 1000 kg/m^3

Buoyant force = Actual weight - Apparent weight

Volume x density of water x g = 5 - 4.5

V x 1000 x 9.8 = 0.5

V = 5.1 x 10^-6 m^3

Weight of gold = Volume of gold x density of gold x gravity

W' = 5.1 x 10^-6 x 19.32 x 1000 x 9.8 = 0.966 N

As W' is less than W so, it is not pure gold.

Using Archimedes' Principle, we determined the density of the crown to be 10.00 g/cm³, which is significantly lower than the density of pure gold (19.32 g/cm³). Therefore, the crown is not made of pure gold.

This problem involves determining whether a crown is made of pure gold using Archimedes' Principle.

According to the given information,

Using Archimedes' Principle, we know that the buoyant force equals the weight of the water displaced:

Since the density of water (ρw) is 1.00 g/cm³, and using the relation 1N = 0.10197 kg in gravitational terms, the weight of the water displaced in kilograms is

The volume of water displaced, which is also the volume of the crown (V), is

Density of the crown = mass / volume.

The mass of the crown (m) is calculated from its weight in air,

Thus, the density of the crown = 509.6 g / 50.96 cm³ = 10.00 g/cm³.

Since the density of pure gold is 19.32 g/cm³ and the calculated density is 10.00 g/cm³, the crown is not made of pure gold.

The mass of the aluminum added is calculated through the principle of conservation of energy, specifically thermal energy. By considering the heat lost by the aluminum and gained by the water, we can rearrange the equation for heat transfer and find that the mass of the aluminum is approximately 37.9 grams.

In this physics question, we're looking at a thermodynamic process involving a chunk of aluminum and water. Given the known values of their respective specific heats, the mass of water, and their final equilibrium temperature, we're aiming to find the mass of the aluminum.

We begin by understanding that in a closed system, the heat gained by one body is equal to the heat lost by another. In this case, the aluminum is losing heat, and the water is gaining it. The equation for heat transfer (Q = mcΔT), where m is mass, c is specific heat, and ΔT is change in temperature.

The heat gained by the water = mass of water * specific heat of water * change of temperature in water = 200g * 4.18J/g°C * (18.9°C - 15.5°C) = 2836.4J.

This is equal to the heat lost by the aluminum. Solving the analogous heat equation for the mass of the aluminum gives us the answer:

m = Q / (c * ΔT) = 2836.4J / (0.897J/g°C * (91.4°C - 18.9°C)) = 37.9g

So the mass of the aluminum is approximately 37.9 grams.

https://brainly.com/question/35546325

#SPJ12

Answer: Part of Europe, part of Africa, part of Antarctic and the entire America.

Explanation: Western hemisphere or west hemisphere encompasses all regions located west of the longitude 0 °, or meridian of Greenwich.

The formal regions located in the western hemisphere is Europe, Africa, Antarctic and America.

Final answer:

Western Europe can be divided into several smaller regions, including northern Europe, southern Europe, Central Europe, and the British Isles. The western hemisphere also includes various formal regions such as Central America, the Caribbean islands, and parts of South America.

Explanation:

Western Europe can be divided into several smaller regions, including northern Europe, southern Europe, Central Europe, and the British Isles. These regions are based on geographical location or cultural similarities. Additionally, the western hemisphere includes various formal regions such as Central America, the Caribbean islands, and parts of South America.

Answer:896 N

Explanation:

Given

mass of bullet [tex]m=8.7 gm[/tex]

Length of barrel [tex]d=105 cm=1.05 m[/tex]

final velocity [tex]v=465 m/s[/tex]

initial velocity [tex]u=0 m/s[/tex]

Work done by all the forces is equal to change in kinetic Energy

[tex]F\cdot d=\frac{1}{2}\times mv^2-0[/tex]

[tex]F_{avg}\times 1.05=\frac{1}{2}\times 8.7\times 10^{-3}\times 465^2[/tex]

[tex]F_{avg}=\frac{0.5\times 8.7\times 10^{-3}\times 465^2}{1.05}[/tex]

[tex]F_{avg}=895.789 Na\pprox 896 N[/tex]

Answer:

32 miles

Explanation:

Assuming that the speed of 60 mph is constant

Distance = Speed × Time

Time is 20 minutes

Converting to hours

[tex]\frac{20}{60}=\frac{1}{3}\ h[/tex]

[tex]Distance=60\times \frac{1}{3}\\\Rightarrow Distance=20\ mi[/tex]

The car covered 20 mi in 20 minutes.

Distance to Longwood would be [tex]52-20=32\ mi[/tex]

Distance to Longwood is 32 miles

Answer:

h = 7.54 m

t = 1.24 s

Explanation:

1.Let g = 9.81 m/s2 is the gravitational acceleration. Since the formula for potential energy is:

[tex]E_p = mgh[/tex]

where m = 0.25 is the ball mass and h is the height. We can solve for h

[tex]h = \frac{E_p}{mg} = \frac{18.5}{0.25*9.81} = 7.54m[/tex]

2. The time it take for the ball to reach a distance of 7.54m with a gravitational acceleration of 9.81m/s2:

[tex]h = \frac{gt^2}{2}[/tex]

[tex]t^2 = \frac{2h}{g} = \frac{2*7.54}{9.81} = 1.54[/tex]

[tex]t = \sqrt{1.54} = 1.24 s[/tex]

Answer:

True

Explanation:

Magma is known as melted rock deep within the Earth, normally coming from the melting of the upper mantle or crust.  Magma is formed by the partial melting of the mantle and crust and this can occur in different  ways. One way can be  called heat-transfer melting. Rising magma or rock will bring heat with it, and so can melt the surrounding mantle or crustal rock. For example, magmas generated in the mantle tend to be around 1200 degrees Celsius, whereas the more silicate minerals such as quartz and orthoclase feldspar (common in continental crustal rocks) begin to partially melt at around 650-850 degrees Celsius. Therefore, the crustal rock will begin to partially melt due to the introduction of heat from rising magma. A Another way of melting rock is known as decompression melting. During decompression melting, rock from within the mantle is brought to the surface adiabatically (no exchange of heat or energy with its surroundings) and so the lithostatic pressure decreases. This means that the parcel of rising rock crosses the solidus, and so at this point the thermal vibration of the molecules is no longer counteracted by the lithostatic pressure and the rock begins to partially melt.

Answer:

The answer is true

Explanation:

hope it helps

To find the speed of Anissa after 2.0 seconds, we need to consider the forces acting on her due to gravity and friction. By calculating the force parallel to the slide using the coefficient of kinetic friction and the normal force, we can determine the acceleration of Anissa. Finally, using the equations of motion, we can find her speed after 2.0 seconds.

To find the speed of Anissa after 2.0 seconds, we need to consider the forces acting on her. The force of gravity pulling her down the slide can be divided into two components: a force parallel to the slide and a force perpendicular to the slide. The perpendicular force is canceled out by the normal force, leaving only the parallel force to consider. This force can be calculated using the coefficient of kinetic friction.

The force parallel to the slide is given by the equation F_parallel = μ_k * N, where F_parallel is the force parallel to the slide, μ_k is the coefficient of kinetic friction, and N is the normal force. The normal force can be calculated using the equation N = m * g * cos(θ), where m is the mass of the object, g is the acceleration due to gravity, and θ is the angle of the slide.

Once we have the force parallel to the slide, we can use Newton's second law to find the acceleration of the object: F_parallel = m * a. Finally, we can use the equation v = u + a * t to find the speed of Anissa after 2.0 seconds, where v is the final velocity, u is the initial velocity (which is 0 since she starts from rest), a is the acceleration, and t is the time.

Plugging in the given values: μ_k = 0.15, m = 55 kg, g = 9.8 m/s^2, θ = 25 degrees, and t = 2.0 s, we can calculate the normal force, force parallel to the slide, acceleration, and final velocity.

The final velocity will depend on the length of the slide and other factors that are not mentioned in the question.

Answer:

120°

Explanation:

given,

mass of two objects are same , Let it be m

speed of both the objects = v

after inelastic collision the

mass are moving with velocity = v/2

let the angle between them be θ₁ and θ₂

writing the equation along y-axis

m v sinθ₁ - m v sinθ₂ = 0

m v sinθ₁ = m v sinθ₂

θ₁ = θ₂ = θ

writing the equation along x- axis

m v cos θ + m v cos θ = 2 m V

 v cos θ =  v/2

 [tex]cos\theta = \dfrac{1}{2}[/tex]

 [tex]\theta = cos^{-1}(\dfrac{1}{2})[/tex]

 [tex]\theta = 60^0[/tex]

angle between the two objects = 2 θ

                                                     = 2 x 60° = 120°

Answer: Newton's law of gravity theory disagrees with Einstein's theory. The last one were named Theory of General Relativity and was discovered and proposed by the physicist Einstein in the year of 1915.

Explanation: Until the beginning of 20 century, the physics were ruled by Isaac Newton's ideas. He believed that the gravity was a force caused by the objects mass on the space, made them to be draw towards each other. Newton thought that the greater the mass of the object, the more intense was its attraction, which would justify the planet's moovements around the sun and how the gravity between them maintain the planets on solar orbit. Concluding, he believed gravity was a immediate force of action, regardless of the distance of the bodies.

Contrary to Newton's law of gravity, in 1915, the physicist Einstein created the Theory of General Relativity, wich discovered that gravity was, in fact, the deformation caused by the attraction of massive celestial bodies. This deformation, related to the Sun, for example, creates a curvature on the space-time and this curvature are followed by the other planets.

So, we can conclude that Newton's law of gravity disagree's with the Theory of General Relativity, once the first believes that light force of attraction are transmitted instantly and, as Einstein already prooved, the gravity influency propagates in the speed of light.

Answer:

m1/m2 = 0.51

Explanation:

First to all, let's gather the data. We know that both rods, have the same length. Now, the expression to use here is the following:

V = √F/u

This is the equation that describes the relation between speed of a pulse and a force exerted on it.

the value of "u" is:

u = m/L

Where m is the mass of the rod, and L the length.

Now, for the rod 1:

V1 = √F/u1 (1)

rod 2:

V2 = √F/u2 (2)

Now, let's express V1 in function of V2, because we know that V1 is 1.4 times the speed of rod 2, so, V1 = 1.4V2. Replacing in the equation (1) we have:

1.4V2 = √F/u1 (3)

Replacing (2) in (3):

1.4(√F/u2) = √F/u1 (4)

Now, let's solve the equation 4:

[1.4(√F/u2)]² = F/u1

1.96(F/u2) =F/u1

1.96F = F*u2/u1

1.96 = u2/u1 (5)

Now, replacing the expression of u into (5) we have the following:

1.96 = m2/L / m1/L

1.96 = m2/m1 (6)

But we need m1/m2 so:

1.96m1 = m2

m1/m2 = 1/1.96

m1/m2 = 0.51

The ratio of the masses of the two ropes, given that the speed of a pulse on rope 1 is 1.4 times the speed on rope 2, is approximately 1:2. This conclusion is attained by applying the concept of pulse velocity in a string or rope, which is governed by the tension and the linear mass density of the material.

The principle guiding the speed of a pulse on a rope or string is tied to the tension and linear density of the rope. The velocity of a pulse in a string or rope is given as v = √(T/μ), where T represents tension, and μ represents linear mass density (mass/length).

In the context of this question, if the speeds of pulses on two ropes are different but the tensions are the same (since the ropes are stretched the same way), the difference in speed must be due to a difference in linear mass density. Specifically, the speed of a pulse is inversely proportional to the square root of the rope's mass per unit length.

Given that the speed of the pulse on rope 1 is 1.4 times the speed on rope 2, the ratio of the masses of the two ropes (m1/m2) will be the square of the inverse ratio of the speeds. Hence, m1/m2 = (1/1.4)² = 0.51 or approximately 1:2.

https://brainly.com/question/3236795

#SPJ3

The horse's velocity after completing a mile on an oval track and ending at the starting point is 0 mph. However, if considering speed, the horse runs at approximately 8.57 mph. The given options do not accurately represent this calculation.

The question pertains to determining the velocity of a horse after running a complete race on an oval track, where the start and end points are the same. In physics, velocity is a vector quantity, meaning it has both magnitude and direction. Since the horse starts and finishes at the same point, the displacement over the course of the race is zero. Consequently, the average velocity is also zero because velocity is displacement divided by time.

In this scenario however, we are looking for speed, which is a scalar quantity and only considers magnitude, not direction. Speed is total distance divided by time. The horse runs a one mile track in 7 minutes. To find the speed, first convert 7 minutes to hours:

7 minutes = 7/60 hours = 0.1167 hours

Then divide the distance (1 mile) by the time in hours to find the speed:

Speed = 1 mile / 0.1167 hours = approximately 8.57 mph

Since none of the options matches this calculation, it seems there might be a mistake in the provided answer choices. If we had to choose from the given options and ignore the direction of the horse's travel, B. 7 mph would be the closest to the calculated value, albeit still not accurate.

Answer:

Option (E)

Explanation:

The Rock glaciers are a type of landform that is formed due to the downward motion of angular blocks under the influence of gravity and the continuous cycle of freeze and thaw method. It mostly occurs in the steep slopes where the soil particles and the rock materials are prone to landslide. Here, the materials are mixed and covered with ice. This also occurs in the region where the permafrost layer undergoes creeping.

This downward motion of ice erodes the soil particles and carries with them further, from the site of talus cone or moraines and extends outward.

Thus, the correct answer is option (E).

Answer:

one of it is e

Explanation:

The subsequent velocities of the satellite and the remains of the launcher can be calculated using the principle of conservation of momentum. The resultant velocities are approximately 8.70×10−² m/s and 81.5 m/s.

The subsequent velocities of the satellite and the remains of the launcher can be calculated using the principle of conservation of momentum. Since there are no external forces acting on the system, the initial momentum of the system is equal to the final momentum. Therefore, the final velocities of the satellite and the launcher can be calculated based on their masses and the kinetic energy supplied to them.

The mass of the satellite, m1 = 4800 kg, and the mass of the launcher, m2 = 1500 kg. The total initial kinetic energy supplied to the system is given as 5000 J. To calculate the velocities, we need to find the ratio of the kinetic energies of the satellite and the launcher.

Let v1 be the velocity of the satellite and v2 be the velocity of the launcher. According to the conservation of momentum, m1 * v1 + m2 * v2 = 0. Also, the total initial kinetic energy supplied to the system is given as 5000 J, where the kinetic energy of the satellite is (1/2) * m1 * v1^2 and the kinetic energy of the launcher is (1/2) * m2 * v2^2.

Using these equations, we can solve for v1 and v2. The subsequent velocities are approximately 8.70×10−² m/s in the direction of motion of the less massive satellite and 81.5 m/s, respectively.

https://brainly.com/question/1285152

#SPJ6

The satellite moves at approximately 0.704 m/s and the remains of the launcher move at approximately -2.253 m/s in the opposite direction.

To solve for the velocities of the satellite and the launcher remains after separation, we will use the principles of conservation of momentum and the given kinetic energy.

1. Conservation of Momentum

[tex]\[m_s v_s + m_l v_l = 0\][/tex]

Since the total momentum is zero:

[tex]\[4800 \, v_s + 1500 \, v_l = 0\][/tex]

Solving for one velocity in terms of the other:

[tex]\[v_l = - \frac{4800}{1500} v_s = -3.2 v_s\][/tex]

2. Conservation of Energy

The total kinetic energy provided to the system is 5000 J. The kinetic energy of the system is the sum of the kinetic energies of both parts:

[tex]\[\frac{1}{2} m_s v_s^2 + \frac{1}{2} m_l v_l^2 = 5000\][/tex]

Substituting [tex]\( v_l = -3.2 v_s \)[/tex]:

[tex]\[\frac{1}{2} (4800) v_s^2 + \frac{1}{2} (1500) (-3.2 v_s)^2 = 5000\][/tex]

[tex]\[2400 v_s^2 + 750 (10.24) v_s^2 = 5000\][/tex]

[tex]\[2400 v_s^2 + 7680 v_s^2 = 5000\][/tex]

[tex]\[10080 v_s^2 = 5000\][/tex]

Solving for [tex]\( v_s^2 \)[/tex]:

[tex]\[v_s^2 = \frac{5000}{10080} = 0.496 \, \text{m}^2/\text{s}^2\][/tex]

[tex]\[v_s = \sqrt{0.496} \approx 0.704 \, \text{m/s}\][/tex]

3. Determine [tex]\( v_l \)[/tex]

Using [tex]\( v_l = -3.2 v_s \)[/tex]:

[tex]\[v_l = -3.2 \times 0.704 \approx -2.253 \, \text{m/s}\][/tex]

The subsequent velocities of the satellite and the launcher remains after separation are:

- Velocity of the satellite: [tex]\( v_s \approx 0.704 \, \text{m/s} \)[/tex]

- Velocity of the launcher remains: [tex]\( v_l \approx -2.253 \, \text{m/s} \)[/tex]

Answer:

Explanation:

Due to changing magnetic field , there will be emf induced in the region . EMF induced will create electric field which will be circular in shape and will be uniform along its circular path

The magnitude of circular electric field can be calculated as follows

We should apply Faraday law of electro magnetic induction

e = - dФ / dt = - ∫ E dl

Here Ф = π r² B

π r² dB / dt = - ∫ E dl

π r² dB / dt = E x 2π r

E = - r / 2 x dB / dt

For a circular electric field having a particular radius , magnitude of field will be constant .

The direction of electric field will be known by lenz's law

In the given case , magnetic field is upwards and it is reducing , therefore electric field induced will be such as to prevent this change of flux.

So electric field will be anticlock-wise . Hence direction of acceleration will also be  anticlock-wise on proton at 1.5 cm from the centre.

Answer:

v₂ = 7/ (0.5)= 14 m/s

Explanation:

Flow rate of the fluid

Flow rate is the amount of fluid that circulates through a section of the pipeline (pipe, pipeline, river, canal, ...) per unit of time.

The formula for calculated the flow rate is:

Q= v*A Formula (1)

Where :

Q is the Flow rate (m³/s)

A is the cross sectional area of a section of the pipe (m²)

v is the speed of the fluid in that section (m/s)

Equation of continuity

The volume flow rate Q for an incompressible fluid at any point along a pipe is the same as the volume flow rate at any other point along a pipe:

Q₁= Q₂

Data

A₁ = 2m² : cross sectional area 1

v₁ = 3.5 m/s : fluid speed through A₁

A₂ = 0.5 m² : cross sectional area 2

Calculation of the fluid speed through A₂

We aply the equation of continuity:

Q₁= Q₂

We aply the equation of Formula (1):

v₁*A₁= v₂*A₂

We replace data

(3.5)*(2)= v₂*(0.5)

7 = v₂*(0.5)

v₂ = 7/ (0.5)

v₂ =  14 m/s

Using the Continuity Equation that states the mass flow rate must be constant in fluid flow, the speed of the fluid when it moves through the narrow part of the pipe is 14 m/s.

The question pertains to the physics principle of fluid dynamics, specifically the concept of continuity in fluid flow. According to the Continuity Equation, the mass flow rate must remain constant across different sections of a pipe. In this particular scenario, the fluid is changing speed due to a reduction in pipe cross-sectional area. This principle is represented by the equation A₁V₁ = A₂V₂, where A₁ and A₂ represent the cross-sectional areas of the wide and narrow sections of the pipe respectively, and V₁ and V₂ represent the fluid's velocity in these sections.

Applying the equation to this scenario, we have A₁ (2.00 m²) multiplied by V₁ (3.5 m/s) equal to A₂ (0.50 m²) multiplied by V₂, the value we want to find. Solving for V₂, we get V₂ = A₁V₁ / A₂ = (2.00 m²)(3.5 m/s) / 0.50 m² = 14 m/s.

Hence, the speed of the fluid when it moves through the narrow part of the pipe is 14 m/s.

https://brainly.com/question/30578986

#SPJ11

Answer:

1. C

2.C

Explanation:

1. The rod is perpendicular to every axis and forces are acting on every location. If the torque on the left side is zero, this indicates that forces with respect to their distance on the left side is zero and doesn't account for the net force at a point.

2. If the net torque about every point on every axis is zero, the rod will be rotational because each axis will yield a magnitude of zero which obeys the principle of rotation at a point.

When the net torque on a rod is zero about the left end, the rod is in rotational equilibrium. If the net force is zero, the rod is in translational equilibrium, and rotational equilibrium depends on the net torque being zero about every axis.

Equilibrium Conditions in Physics

To determine whether a rod is in equilibrium under the influence of several forces, we need to examine the conditions for both translational and rotational equilibrium. The conditions necessary for equilibrium are quite straightforward:  

The net external force on the system must be zero (net F = 0), ensuring there is no linear acceleration.

The net external torque must also be zero (net T = 0), preventing any angular acceleration.

Addressing the questions:

If the net force on the rod is zero, it indicates that the rod is in translational equilibrium. However, for the rod to be in rotational equilibrium, we must also confirm that the net torque about every axis through anyone point is zero (Option B).

Each static equilibrium condition is critical in itself. While the zero net force ensures no linear acceleration, the zero net torque ensures no rotational acceleration. Both conditions are required for complete static equilibrium of an object.

Answer:

309 m

Explanation:

time apart = 0.8 s

speed of sound in air = 343 m/s

speed of sound in concrete = 3000 m/s

lets assume it time it takes to travel trough concrete = T

the time it takes to travel through air = T + 0.8 since they are 0.8 s apart

the distance traveled by both waves is the same, so we can equate the distance for both waves

distance  = speed x time

now equating the two distance together we have

3000 x T  = 343 x (T + 0.8)

3000T = 343T + 274.4

3000T - 343T = 274.4

T = 0.103 s

recall that distance = 3000 x T = 3000 x 0.103 = 309 m

Answer:

Both forces have the same magnitude

Explanation:

1) Notation

[tex]F_{bus}[/tex]= force exterted by the bus to the firefly

[tex]F_{firefly}[/tex]= force exterded by the firefly to the bus

2) Analysis for the situation

The reason why is from the Third law of Newton that states: "For every action, there is an equal reaction force on the opposite direction to the original action force".

For this special case on math terms we have:

[tex]F_{bus}=F_{firefly}[/tex]

The fact that the firefly splatter on this case is because since have a smaller mass, it is less able to stand up to the larger acceleration from the interaction.

3) Conclusion

Based on this analysis, each force would have the same magnitude, so none force is greater than the other.

The force on the firefly and the force on the bus are equal in magnitude but opposite in direction, demonstrating Newton's third law of motion.

When a firefly collides with the windshield of a bus, we have a real-life illustration of Newton's third law of motion. This law states that for every action there's an equal and opposite reaction.

In the case of the firefly and the bus, both objects exert forces on each other that are equal in magnitude but opposite in direction.

The mess that is made when the firefly hits the bus might suggest to us that the force on the firefly is greater, but according to Newton's third law, the force on the firefly and the force on the bus are actually the same.

This symmetry in nature is fundamental to our understanding of physics and can be observed in many situations, like a professor walking across a room or a car accelerating down a road.

https://brainly.com/question/974124

#SPJ2

The final volume of the gas is 238.9 mL

Explanation:

We can solve this problem by using Charle's law, which states that for a gas kept at constant pressure, the volume of the gas (V) is proportional to its absolute temperature (T):

[tex]\frac{V}{T}=const.[/tex]

Which can be also re-written as

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

where

[tex]V_1, V_2[/tex] are the initial and final volumes of the gas

[tex]T_1, T_2[/tex] are the initial and final temperature of the gas

For the gas in the balloon in this problem, we have:

[tex]V_1 = 7.00\cdot 10^2 mL = 700 mL[/tex] is the initial volume

[tex]T_1=20.0^{\circ}C+273=293 K[/tex] is the initial absolute temperature

[tex]V_2[/tex] is the final volume

[tex]T_2 = 1.00\cdot 10^2 K = 100 K[/tex] is the final temperature

Solving for [tex]V_2[/tex],

[tex]V_2 = \frac{V_1 T_2}{T_1}=\frac{(700)(100)}{293}=238.9 mL[/tex]

Learn more about ideal gases:

brainly.com/question/9321544

brainly.com/question/7316997

brainly.com/question/3658563

#LearnwithBrainly

Answer:

321 280 J

Explanation:

Work done =  force * distance

The distance is 32 m

The force can be calculated using the second law of motion

F = ma = (7130 N ÷ 9.8 m/s²) * 13.8 m/s² = 10 040 N

Work done =  force * distance

                   = 10 040 N * 32 m

                   = 321 280 J

Answer:

321 280

Explanation:

Work done =  force * distanceThe distance is 32 mThe force can be calculated using the second law of motionF = ma = (7130 N ÷ 9.8 m/s²) * 13.8 m/s² = 10 040 NWork done =  force * distance                   = 10 040 N * 32 m                   = 321 280 J

Explanation:

If there isn't the shorting mechanism, the whole set will be blown if anyhow one lamp burns out. Since having blown out several lamps and then shorted, the overall resistance of the remaining operating lamps will be decreased  resulting in an increased working current that is adequate to blast the fuse.

Answer:D

Explanation:

For Rod 1

length,diameter and Tension is L, d and T

for Rod 2 length,diameter and Tension is 2L, 2d and 2T

Change in Length is given by

[tex]\Delta =\frac{PL}{AE}[/tex]

where P=load

L=length

A=area of cross-section

E=young's Modulus

[tex]\Delta _1=\frac{TL}{\frac{\pi d^2}{4}E}[/tex]

since both are aluminium rod therefore E is common

[tex]\Delta _2=\frac{2T\cdot 2L}{\frac{\pi (2d)^2}{4}E}[/tex]

[tex]\Delta _2=\frac{TL}{\frac{\pi d^2}{4}E}=\Delta _1[/tex]

Thus extension in both the rods are same

The change in length of a rod under tension or compression depends on several variables. The change in length is directly proportional to the force and the original length and inversely proportional to the cross-sectional area. Therefore, if Rod #1 is under tension T and Rod #2 is under tension 2T, the change in length of Rod #2 will be double the change in length of Rod #1.

The change in length of a rod under tension or compression depends on several variables. These variables include the force applied (T or 2T), the original length of the rod (L or 2L), and the cross-sectional area of the rod (πd^2/4 or π(2d)^2/4). The change in length is directly proportional to the force and the original length and inversely proportional to the cross-sectional area. Therefore, if Rod #1 is under tension T and Rod #2 is under tension 2T, the change in length of Rod #2 will be double the change in length of Rod #1.

Answer:

Trophosphere

Explanation:

The troposphere is the atmospheric layer closest to the planet and is characterized because contains the largest percentage of the mass of the total atmosphere.

On special characteristic is that in this layer the temperature and water vapor content decrease a lot respect to the altitude. Also on this layer the Water vapor is important in order to regulate the air temperature since on this zone we have absorption of the solar energy.

The troposphere contains almost all the water vapor in the atmosphere. And specially on the tropics we have an accumulation of the water vapour.

All weather phenomena occur within the troposphere. Tropos means "change" and Troposphere means "region of mixing".

Above this layer, we have the tropopause, ranges in height from 5 miles near the poles up to 11 miles above the equator. And the height depends of the seasons, with an special characteristic: the is highest height occurs in the summer and lowest height occurs in the winter.

The troposphere contains almost 75% of the mass of the entire atmosphere. The air on this layer is composed by 78% nitrogen, 21% oxygen and 1% is made of argon, water vapor, and carbon dioxide.

So for this reason this is the Region that contains the majority of molecules in the atmosphere.