Elements with similar properties are located in the same column of the periodic table, as these elements have the same number of valence electrons, which determine their chemical properties.
Explanation:Elements with similar properties are found in the same column of the periodic table. This is due to the fact that elements in the same column (also known as a group) have the same number of electrons in their outermost energy level, also known as valance electrons. These valance electrons determine an element's chemical properties. For example, Group 18 elements, or noble gases, all have a complete set of electrons in their outermost shell, making them extremely stable and unreactive.
Learn more about Periodic Table here:https://brainly.com/question/31672126
#SPJ12
A student is told that both energy and mass must be conserved in every chemical reaction. She measures the mass of Hydrochloric acid and a zinc strip separately. She then places the zinc strip into the acid and bubbles form as the zinc looks like it disappears. The combined mass afterward is less than the original.
Answer:
Explanation:
When we react Hydrochlorid Acid with zinc we have the following reaction:
2HCl(aq) + Zn(s) --> ZnCl2(aq) + H2(g)
The hydrogen gas formed is lost to the environment, so we can affirme that in the start we have the mass for all the H, Cl and Zn atoms in the solution, but after the reaction occurs, we have only the mass for the Cl and Zn atoms.
That's why the mass is less than the original.
The law that the student was told is only applied to closed environments.
what would you notice about the dot diagram of an unstable element?
The dot diagram of an unstable element has incompletely filled shell that is it will not have 8 dots which represent a stable octet.
What is an element?
It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
How does hydrogen bonding affect the physical properties of substances?
Final answer:
Hydrogen bonding affects the physical properties of substances such as water and carboxylic acids by increasing their boiling point, melting point, solubility, heat capacity, surface tension, and viscosity due to the additional attractive intermolecular forces these bonds provide.
Explanation:
Hydrogen bonding significantly influences the physical properties of substances. These intermolecular forces occur when a hydrogen atom bonded to a strongly electronegative atom, like oxygen or nitrogen, is attracted to another electronegative atom in a nearby molecule. This attraction leads to a type of bond that, while not as strong as a covalent bond, significantly affects a substance's physical characteristics.
For instance, in water molecules, hydrogen bonds form between the positively charged hydrogen atom of one molecule and the negatively charged oxygen atom of another. This results in a network of bonds that increase the melting point and boiling point of water, compared to what would be expected based on its molecular weight alone. It's also the reason why water has a high heat capacity, surface tension, and viscosity.
In the case of carboxylic acids, hydrogen bonding allows these molecules to dimerize (form pairs), which enhances their boiling points and makes them more soluble in water than comparable hydrocarbons. When carboxylic acids dissolve in water, the hydrogen bonding facilitates the interaction between acid molecules and water, which is crucial for their dissolution and the resultant physical properties.
In which medium would light have the longest wavelength? water air glass diamond
the answer is b air
One way the modern atomic model differs from Thomson's atomic model is that electrons are no longer scattered throughout and atom's positive matter like chocolate chips in a cookie dough. instead, each electron is outside of the nucleus occupying a specific ___
Predict the bond present between carbon and hydrogen in polyethylene
Hydrazine (n2h4) is used as rocket fuels. it reacts with oxygen to form nitrogen and water. write the balanced equation for this reaction. n2h4 + o2 → n2 +2h2o how many liters of n2 at stp form when 100g of n2h4 reaction with 100g of o2? how many grams of the excess reagent remain after the reaction?
The answer is: volume of nitrogen is 70L.
Chemical reaction: N₂H₄ + O₂ → N₂ + 2H₂O.
m(N₂H₄) = 100 g; mass of hydrazine.
M(N₂H₄) = 32 g/mol; molar mass of hydrazine.
n(N₂H₄) = m(N₂H₄) ÷ M(N₂H₄).
n(N₂H₄) = 100 g ÷ 32 g/mol.
n(N₂H₄) = 3.125 mol; amount of hydrazine.
m(O₂) = 100 g; mass of oxygen.
M(O₂) = 32 g/mol; molar mass of oxygen.
n(O₂) = 100 g ÷ 32 g/mol.
n(O₂) = 3.125 mol; amount of oxygen.
From chemical reaction: n(O₂) : n(N₂) = 1 : 1; n(O₂) = n(N₂).
n(N₂) = 3.125 mol; amount og nitrogen gas.
V(N₂) = n(N₂) · Vm.
Vm = 22.4 L/mol; molar volume.
V(N₂) = 3.125 mol · 22.4 L/mol.
V(N₂) = 70 L.
There is not excess reagent, because hydrazine and oxygen are all used in chemical reaction.
Example 1: urea, (nh2)2co, is used in the manufacture of resins and glues. when 5.00 g of urea is dissolved in 250.0 ml of water (d = 1.00 g/ml) at 30.0 c, 27.6 kj of heat is absorbed. (specific heat of water 4.18 j/g.c) is the solution process exothermic? what is ? what is the final temperature of solution?
trampoline and playground
Which of these equations demonstrates energetic coupling in a cell? equation 1: atp + h2o → adp + pi δg1 = –7 kcal/mol equation 2: phosphoenolpyruvate + h2o → pyruvate + pi δg2 = –14.8 kcal/mol equation 3: glucose + pi → glucose-6-phosphate + h2o δg3 = +3.3 kcal/mol equation 4: adp + pi → atp + h2o δg3 = +7 kcal/mol?
Final answer:
Energetic coupling in a cell is demonstrated when the energy from an exergonic reaction, like ATP hydrolysis (Equation 1), is used to drive an endergonic reaction, such as the phosphorylation of glucose (Equation 3). ment.
Explanation:
Energetic coupling is a process where the energy released by an exergonic reaction (such as ATP hydrolysis) is used to drive an endergonic reaction, making the coupled process energetically favorable. To identify energetic coupling, we look for equations that pair an exergonic reaction with an endergonic reaction.
Equation 1: ATP + H2O → ADP + Pi; ΔG1 = –7 kcal/mol. This equation represents the hydrolysis of ATP, an exergonic reaction releasing energy.
Equation 3: glucose + Pi → glucose-6-phosphate + H2O; ΔG3 = +3.3 kcal/mol. This equation represents the endergonic process of phosphorylating glucose, which requires input of energy.
The coupling of ATP hydrolysis (Equation 1) to drive the phosphorylation of glucose (Equation 3) in cellular metabolism demonstrates energetic coupling. Here, the energy released from ATP is used to phosphorylate glucose, a process critical for cellular metabolism and an example of how cells harness energy from exergonic reactions to power endergonic reactions. Such coupling is central to cellular bioenergetics and metabolic pathways.
Which hypothesis led to the discovery of the proton?
Answer:
a ) when a neutral hydrogen atom loses an electron, a positively-charged particle should remain
There are ________ hydrogen atoms in 25 molecules of c4h4s2.
Answer: 100.
Explanation:
1) The subscripts to the right of each element (symbol) in the chemical formula tells the number of atoms of that element present in one unit formula.
2) The unit formula of C₄H₄S₂ is equal to 1 molecule.
3) Therefore, there are 4 carbon atoms, 4 hydrogen atoms and 2 sulfur atoms in each molecule of C₄H₄S₂.
4) Then, you just have to multiply the corresponding subscript of the element times the number of molecules (25 in this case) to find the number of atoms of that kind.
5) These are the calculations for each element in the molecule C₄H₄S₂.
i) C: 4 × 25 = 100
ii) H: 4 × 25 = 100
iii) S: 2 × 25 = 50.
6) The question is about H only, so the answer is that there are 100 hydrogen atoms in 25 molecules of C₄H₄S₂.
A rigid vessel at constant temperature initially contains 0.600 atm nitrogen gas and 0.600 atm hydrogen gas. if these gases react to form ammonia and the reaction goes to completion, which choice is closest to the final total pressure after the reaction?
The final total pressure after the completion of reaction is [tex]\boxed{0.8{\text{ atm}}}[/tex].
Further Explanation:
Stoichiometry:
The amountof species present in the reaction is determined with the help of stoichiometry by the relationship between reactants and products.
Balanced chemical reaction between nitrogen and hydrogen is as follows:
[tex]{{\text{N}}_{\text{2}}} + 3{{\text{H}}_2} \to 2{\text{N}}{{\text{H}}_{\text{3}}}[/tex]
This balanced reaction’s stoichiometry clearly indicates that one mole of nitrogen reacts with three moles of hydrogen to produce two moles of ammonia.
Since pressure is directly related to number of moles of gas, pressure required by hydrogen to react with one mole of nitrogen should be three times of pressure of nitrogen.
Therefore pressure of hydrogen can be calculated as follows:
[tex]\begin{aligned}{\text{Pressure of hydrogen}} &= 3\left( {0.600{\text{ atm}}} \right) \\&= 1.8{\text{ atm}} \\\end{aligned}[/tex]
But pressure of hydrogen in the rigid vessel is 0.600 atm only so it behaves as limiting reactant and its amount will govern the amount or quantity of product formed (ammonia).
Since the ratio of pressures of hydrogen and ammonia is 3:2, pressure of ammonia can be calculated as follows:
[tex]\begin{aligned}{\text{Pressure of ammonia}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]
Pressure of unreacted nitrogen can be calculated as follows:
[tex]\begin{aligned}{\text{Pressure of unreacted nitrogen}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]
Therefore total final pressure after the reaction can be calculated as follows:
[tex]\begin{aligned}{\text{Total final pressure}} &= \left( {0.4 + 0.4} \right){\text{ atm}} \\&= {\text{0}}{\text{.8 atm}} \\\end{aligned}[/tex]
Learn more:
Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603 Calculate the moles of ions in the solution: https://brainly.com/question/5950133
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Mole concept
Keywords: stoichiometry, NH3, H2, N2, pressure, hydrogen, nitrogen, ammonia, 0.4 atm, 1.8 atm, 0.600 atm, 3H2, 2NH3, 0.8 atm.
In the diagram, above, marker D is pointing to a __________, which is a landform that forms when a river slows down as it flows into an ocean or lake. As the river slows, it drops its sediment load, gradually creating a network of small channels and islands.
When substances go through chemical changes, which of the following will always happen? A. Exactly one new substance will form and one will be destroyed. B. One or more substances with different chemical properties will form. C. One or more substances will be completely destroyed. D. A gas will form or a white solid will precipitate.
When taking measurements, you must consider _____.
- accuracy, precision, and uncertainty
- only accuracy
- only precision
- only uncertainty
If a 3.30 m sample of a is heated to 500 k, what is the concentration of b at equilibrium?
To find the concentrations at equilibrium, one would use the equilibrium constant (K). Given known concentrations and the stoichiometry of the reaction, one can solve for the unknown concentration. Be sure to convert all quantities to appropriate units (molarity), and remember that these calculations assume that the system is at equilibrium.
Explanation:The question pertains to chemical equilibrium, particularly the equilibrium for the reaction N₂(g) + 3H₂(g) = 2NH3(g) at 500 k. It seems like there could be some missing details in the question, so I'll provide a general approach to solving problems like this.
To find the concentrations at equilibrium, we can use the concept of equilibrium constants. In this case, the equilibrium constant (K) for the reaction N₂(g) + 3H₂(g) = 2NH3(g) would be expressed as K = [NH3]² / ([N2][H2]³). Plugging in the known concentrations, one can solve for the unknown, which might be the concentration of 'b' referred to in the original question.
Note that the concentrations should be in molarity (M) units, which represent moles of solute per liter of solution. Therefore, the 3.30 m sample needs to be converted into volume (in litres) to derive the molarity given the number of moles of the substance.
Remember that calculations with equilibrium constants assume that the system has reached equilibrium, and that temperature remains constant. If the actual situation doesn't meet these conditions, more complex calculations might be needed.
Learn more about Chemical Equilibrium here:https://brainly.com/question/3920294
#SPJ11
Sea anemones are predatory invertebrates with stinging tentacles that can paralyze many sea animals. The clownfish is immune to the sting of the sea anemone and actually lives among its tentacles. The relationship is mutually beneficial—the clownfish often lures meat-eating animals over to the anemone, and the anemone benefits from the meal. The clownfish often gets to eat leftovers from the anemone’s meal.
When the clown fish is ready to lay eggs, it lays them near a sea anemone. How’s this a reproductive strategy?
The sea anemone protects the clownfish’s eggs from predators.
The sea anemone fertilizes the clownfish’s eggs.
The sea anemone provides nourishment for the clownfish’s eggs.
The sea anemone uses the clownfish’s eggs to lure prey.
The sea anemone lets the clownfish rest on it.
NextReset
Clownfish lay their eggs near sea anemones as a reproductive strategy because the anemones' stinging tentacles protect the eggs from predators.
When clownfish are ready to lay eggs, they do so near a sea anemone to leverage the anemone's natural defenses as part of their reproductive strategy.
Sea anemones have stinging tentacles that can immobilize or deter potential predators. This interaction is a classic example of mutualism, a type of symbiotic relationship between two organisms where both benefit.
For clownfish, laying eggs near the sea anemone means the eggs are protected by the anemone's stinging capabilities, which significantly reduces the likelihood of predators consuming them. The correct answer to how this is a reproductive strategy is that the sea anemone protects the clownfish's eggs from predators.
Although clownfish and anemones do have a mutually beneficial relationship overall, in this specific case, the anemone does not fertilize, nourish the eggs, or use them to lure prey, nor does it provide a resting place for clownfish.
What is the molar mass of the empirical formula for a compound with the formula C6H12Cl2O2
The molar mass of the empirical formula CH2ClO for the compound C6H12Cl2O2 is 65.476 g/mol, calculated by summing the atomic masses for carbon, hydrogen, chlorine, and oxygen.
The student is asking about the molar mass of the empirical formula for a compound with the formula C6H12Cl2O2. An empirical formula represents the simplest whole-number ratio of the elements within a compound.
For the given compound, its empirical formula is CH2ClO. To find the molar mass of this empirical formula, we sum the atomic masses of each element, adjusting for the number of atoms present. The atomic masses are approximately 12.01 g/mol for carbon (C), 1.008 g/mol for hydrogen (H), 35.45 g/mol for chlorine (Cl), and 16.00 g/mol for oxygen (O).
The calculation is as follows:
(1 \\u00d7 12.01 g/mol) for C(2 \\u00d7 1.008 g/mol) for H(1 \\u00d7 35.45 g/mol) for Cl(1 \\u00d7 16.00 g/mol) for OAdding them together, the molar mass of the empirical formula CH2ClO is:
12.01 + (2 \\u00d7 1.008) + 35.45 + 16.00 = 65.476 g/mol.
Therefore, the molar mass of the empirical formula for the compound is 65.476 g/mol.
What new inforamtion can you add the your definition of physical change?
Which of these practices does the most to keep wind and water from carrying away topsoil?
A. Crop rotation
B. Integrated pest management
C. Drip irrigation
D. Cover crops
Answer:
The correct answer is Cover Crops
Valence electrons are responsiblefor the makeup of chemical properties of elements true or false
Answer:
WRONG-the answer is TRUE
Explanation:
NaCl + AgNO3 —> AgCl + NaNO3
How much AgNO3 is consumed during the reaction with 78 g of NaCl?
Final answer:
To find the amount of AgNO₃ consumed, calculate the moles of NaCl present in 78 g and use the one-to-one mole ratio of the reactants to determine the moles and then the mass of AgNO₃ consumed, which is 226.86 grams.
Explanation:
To calculate how much AgNO₃ is consumed in the reaction with 78 g of NaCl, we first need to understand the stoichiometry of the reaction. The balanced chemical equation is:
NaCl (aq) + AgNO₃ (aq) → AgCl (s) + NaNO₃ (aq)
This indicates that 1 mole of NaCl reacts with 1 mole of AgNO₃ to produce 1 mole of AgCl and 1 mole of NaNO₃.
First, we must examine the reaction stoichiometry, which is a one-to-one ratio. Therefore, we need to calculate the number of moles of NaCl:
Find the molar mass of NaCl: Na (22.99 g/mol) + Cl (35.45 g/mol) = 58.44 g/molCalculate the moles of NaCl: 78 g NaCl ÷ 58.44 g/mol = 1.335 moles NaClSince the stoichiometry is one-to-one, the moles of NaCl will equal the moles of AgNO₃ that react:
1.335 moles NaCl = 1.335 moles AgNO₃ consumedFind the molar mass of AgNO₃: Ag (107.87 g/mol) + N (14.01 g/mol) + 3×O (16 g/mol each) = 169.87 g/molCalculate the mass of AgNO₃ consumed: 1.335 moles × 169.87 g/mol = 226.86 grams AgNO₃Therefore, 226.86 grams of AgNO₃ is consumed when 78 grams of NaCl react.
What is my theoretical yield (in moles) of Potassium Bromide (KBr) if I start with 40 grams of Iron (II) Bromide [FeBr2]? moles KBr
Assume that 1.0 mol of C4H10 is completely burned in excess oxygen to form carbon dioxide and water. How many moles of CO2 would be produced?
Final answer:
The complete combustion of 1.0 mole of C4H10 (butane) in excess oxygen will produce 4 moles of carbon dioxide (CO2).
Explanation:
To determine how many moles of carbon dioxide (CO₂) are produced when 1.0 mole of C₄H₁₀ (butane) is completely burned in excess oxygen, we need to first write and balance the chemical equation for the combustion of butane. The balanced chemical equation for the combustion of butane is:
C₄H₁₀ + 6.5O₂ → 4CO₂ + 5H₂O
This equation shows that 1 mole of butane reacts with 6.5 moles of oxygen to produce 4 moles of CO₂ and 5 moles of water (H₂O). Therefore, the complete combustion of 1.0 mole of C₄H₁₀ will produce 4 moles of carbon dioxide.
Assuming complete dissociation, what is the molality of k+, br− in an aqueous solution of kbr whose freezing point is -2.53 ∘c? the molal freezing-point-depression constant of water is 1.86 (∘c⋅kg)/mol.
A compound has the empirical formula CH2O. If the compound’s molecular mass is 180 g/mol, determine the molecular formula of the compound. Be sure to show your work.
In bowen's discontinuous reaction series, the first mineral to crystallize out of a mafic melt is __________ .
Final answer:
The correct answer is "olivine". In Bowen's discontinuous reaction series, olivine is the first mineral to crystallize from a mafic melt. It later reacts to form pyroxene as the magma cools. This series helps us understand mineral crystallization and the formation of igneous rocks.
Explanation:
In Bowen's discontinuous reaction series, the first mineral to crystallize from a mafic melt is olivine. The process of crystallization in a cooling magma begins with high-temperature minerals like olivine. As the temperature of the magma decreases, different minerals begin to crystallize while others become unstable, with olivine reacting with silica to form pyroxene at lower temperatures. This reaction is represented by the equation Mg2SiO4 + SiO2 > 2MgSiO3, turning olivine into pyroxene. Through Bowen's reaction series, we understand that the crystallization of minerals removes elements such as magnesium (Mg) and iron (Fe) from the magma, altering its composition over time. These early-formed minerals are known as phenocrysts, and their formation is sequential based on the cooling of the magma. Bowen's reaction series not only informs us about mineral crystallization sequences but also about the formation of different igneous rocks and their compositions.
fast-moving glaciers that can move up to 6 kilometers per year.
Surging glaciers experience a significant increase in movement, moving at speeds much faster than the average glacier.
A glacial surge is a sudden increase in the speed of a glacier, often moving tens of meters per day, which is significantly faster than the typical glacier movement. Glaciers generally move by pseudo-plastic flow and their velocity is greatest at the surface, tapering off towards the base due to internal deformation and basal slipping. While average glacier speed is around 10 inches per day, surging glaciers can greatly exceed this, with some known to move up to 6 kilometers per year.
Notable examples of surging glaciers include the Hubbard Glacier, which in 1986 surged across the Russell fjord, and Greenland's fast-moving Jakobshavn glacier. Surging can be caused by various factors, but one believed to be significant is the buildup of water pressure beneath the glacier, which effectively 'floats' the ice, letting it slip over the bedrock. The presence of looped moraines on the glacier surface is a key indicator of a surging glacier.
Which of the following can explain the daily change in sea level observed along a coast?
A. The gravitational pull of the moon on the water near the coast
B. The speed of the ocean's conveyor belt near the coast
C. Earthquakes and volcanoes near the coast
D. The concentration of salt in the water near the coast
How does the shape of a molecule factor into its molecular polarity?