Answer: C) Resilience and Redundancy
Explanation:
According to the principle of communication and information system , redundancy is the factor that maintains the continuous flow of message or data even when failure is experienced in network by adding alternate or extra component in infrastructure for support.Resilience is the factors that helps network to persist even in the state of faults by keeping the main function working and recovering the fault to maintain the flow of data.Other options are incorrect because security is protection of data. Reliability factor means dependency , scalibility is changing scale of network and portability is changing position of components. Interoperability is exchanging information with devices and making use of it.Thus, the correct option is option(C).
Answer:
C. Resilience and Redundancy
Explanation:
Robust systems are characterized by having the ability to maintain their essential performance conditions despite receiving disturbances or noise. Robustness is the ability of a system to absorb stress and continue functioning, particularly when the system is subjected to unpredictable variations in its scope of performance.
The redundancy, consisting of the duplication of the critical components of a system, is developed with the purpose of granting robustness to the systems, so that in the event of the failure of a component that could jeopardize the main task or objective of the system, there is an alternative capable of replacing the system that suffers from a failure.
Robustness or resilience is characterized by two important aspects, the first is resistance to change or flexibility that is expressed as the ability of a system to resist a disturbance without undergoing irreversible change and the second is the ability of a system to recover.
Assume the int variable value has been initialized to a positive integer. Write a while loop that prints all of the positive divisors of value. For example,if values is 28, it prints divisors of28: 1 2 4 7 14 28
Answer:
The program to this question can be given as:
Program:
#include <iostream>//header file.
using namespace std; //using namespace
int main() //main function.
{
int value=28, x=1; //define variable.
cout<<"divisors of "<< value <<":"; //print value.
while (x <= value) //loop
{
if ((value % x) ==0) //if block
cout<<" "<<x; //print value
x++; //increment value.
}
return 0;
}
Output:
divisors of 28: 1 2 4 7 14 28
Explanation:
The description of the above c++ program can be given as:
In this program firstly we include a header file. Then we define a main method. In this method we define a variables that is "value and x" and assign a value that is "28 and 1". The variable "x" is used to calculate the value of divisors and print its values and then we print the value variable value. Then we define a while loop. It is an entry control loop in this loop, we check the condition that the variable x is less than equal to value. In this loop, we use a conditional statement. In the if block we define condition that is variable value modular variable x is equal to 0. if this condition is true it will print the value and increment value of variable x. When variable x is greater than and equal to value variable it will terminate the loop and print the value.So, the output of this program is "1 2 4 7 14 28".
Timothy was reading tournament results of the football World Cup matches on Infogoalistic.com. As he was going through the results, an advertisement of new football studs popped up. This is an example of ________ advertising.
A) covert
B) contextual
C) surrogate
D) niche
E) user-generated
Answer:
B) contextual
Explanation:
Contextual advertising is a form of targeted advertising for advertisements appearing on websites or other media.
For example:
Timothy was reading tournament results of the football World Cup matches on Infogoalistic.com. As he was going through the results, an advertisement of new football studs popped up. This is an example of contextual advertising.
On your Web page, you include various links and clickable images that have the ability to trigger various functions when users click them with the mouse. What term describes user-initiated action on a Web page?
Answer:
Event is the correct answer to the given question.
Explanation:
Because when user clicks from the mouse on the image or any link then the clickable event triggered the various function. Event one of the essential part of DOM. It is an important event in the JavaScript. When the left button of the mouse is clicked on the images or links which are clickable then the mouseup event occurs.
HTML contains the set if an events when the user click on the clickable events then the JavaScript code are triggered
Assume that you have created a class named Dog that contains a data field named weight and an instance method named setWeight(). Further assume that the setWeight() method accepts a numeric parameter named weight. Which of the following statements correctly sets a Dog's weight within the setWeight() method?a. weight = weight
b. this.weight = this.weight
c. weight = this.weight
d. this.weight = weight
Answer:
D) this.weight = weight
Explanation:
since a constructor call in java sets the initial value for variable, using the this.
in this way, refers to the current object in a method or constructor.
Write a method, makeSubjectLine, that gets a String argument and returns the same String but with "Subject: " in front of it. So if the argument is "Are you going to the show?" the method returns "Subject: Are you going to the show?".
Answer:
public class newass {
/*
Write a method, makeSubjectLine, that gets a String argument and returns the same String but with "Subject: " in front
of it. So if the argument is "Are you going to the show?" the method returns "Subject: Are you going to the show?".
*/
public static void main(String[] args) {
System.out.println(makeSubjectLine("Are you going to the show?"));
}
public static String makeSubjectLine(String subj){
return "Subject: "+subj;
}
}
Explanation:
The solution in Java Programming Language
Refer to the exhibit. A network administrator configures a named ACL on the router. Why is there no output displayed when the show command is issued?
Answer:
The correct answer to the following question is ACL name is the case sensitive.
Explanation:
ACL name is unique, alphanumeric and case sensitive that's why the router deals like the access_network, the ACCESS_NETWORK as it if they are the two separates ACL's.
That's why ACL always has the unique identities.
When computer criminals launch an intentional attack in which servers are flooded with millions of bogus service requests that so occupy the server that it cannot service legitimate requests, it is called a ________ attack.
Answer:
"Denial of service" is the correct answer to the following statement.
Explanation:
DoS attack is that type of cyberattack in which an individual system or an internet connection to the different fakes services which target the resources of the system and it is an illegal act according to 'Computer Misuse Act' which comes in 1990's.
It is an attack which is done by the computer terrorists, they can mostly flood the severals of the fake services in the intention of theft privacy and resources from the system.
Which of the following is false? A. The last element of an array has position number one less than the array size. B. The position number contained within square brackets is called a subscript. C. A subscript cannot be an expression. D. All of these.
Answer:
C.A subscript cannot be an expression
Explanation:
The option C (A subscript cannot be an expression) is false
The false statement is a subscript that cannot be an expression. The correct option is C.
What is subscript?An integer, real, complex, logical, or byte expression is a subscript expression. It must be an integer expression, according to the FORTRAN Standard.
Subscript is most typically encountered in chemical formulations, where the text right below the surrounding text specifies the number of atoms required to create the formula. H₂O, the chemical symbol for water, is a very typical example.
Writing can be described as any standard system of marks or signs that expresses a language's utterances. Language becomes visible through writing. Writing, unlike speech, is concrete and, by comparison, permanent.
Therefore, the correct option is C. A subscript cannot be an expression.
To learn more about subscripts, refer to the link:
https://brainly.com/question/28083256
#SPJ5
An organization has a website with a guest book feature, where visitors to the web site can input their names and comments about the organization. Each time the guest book web page loads, a message box is prompted with the message "You have been P0wnd" followed by redirection to a different website. Analysis reveals that the no input validation or output encoding is being performed in the web application. This is the basis for the following type of attack?A. Denial of ServiceB. Cross-site Scripting (XSS)C. Malicious File ExecutionD. Injection Flaws
Answer:
B
Explanation:
Answer:
C: Malicious File Execution
Explanation:
An emmbedded file in the Landing page of the website cause the page to be automatically redirected to another source, the new page loads automatically, malicious execution of the webpage redirects the new site to another link, and makes such traffic meant for the site to be automatically turned to another website.
_________ is a feature of all modern browsers that will delete your history, cache, and cookies the moment you close the private window. Private browsing Do not track Anonymity Automation
Answer:
"Private browsing" is the correct answer to the following question.
Explanation:
Private browsing is the private mode, if the person works on the private browsing then its information would not be stored in the browser which means his the record of your would not store in the browser that is completely private to the other persons but his ISP is always recorded if you are browsing private or not.
The other name of private mode is the incognito mode which is available in all the browsers in one of these two names.
"Private browsing" is the correct answer to the following question.
Explanation:
Private browsing is the private mode, if the person works on the private browsing then its information would not be stored in the browser which means his the record of your would not store in the browser that is completely private to the other persons but his ISP is always recorded if you are browsing private or not.
The other name of private mode is the incognito mode which is available in all the browsers in one of these two names.
A student is recording a song on her computer. When the recording is finished, she saves a copy on her computer. The student notices that the saved copy is of lower sound quality than the original recording. Which of the following could be a possible explanation for the difference in sound quality?
A. The song was saved using fewer bits per second than the original song.
B. The song was saved using more bits per second than the original song.
C. The song was saved using a lossless compression technique.
D. Some information is lost every time a file is saved from one location on a computer to another location.
Answer:
A. The song was saved using fewer bits per second than the original song.
Explanation:
A song can be recorded on the computer or any device ranging from bit rates 96 kbps to 320 kbps.
The lesser the bitrates the lesser the quality of the audio and when we increase the bit rates, the quality of the audio recorded gradually increases.
Bitrates of 128 kbps give us a radio like quality whereas when we use bitrates of 320 kbps we get very good or CD-like quality.
According to the scenario, the most appropriate answer is option A.
Final answer:
The saved copy of the song is likely of lower sound quality because it was saved using fewer bits per second (Option A). Lowering the bit rate can reduce quality noticeably when less information of the sound is captured. Lossless compression doesn't degrade quality, and saving with more bits or transferring within a computer does not reduce sound quality.
Explanation:
The difference in sound quality of the student's recording could be due to saving the song using fewer bits per second than the original song (Option A). A lower bit rate reduces the file size but can also degrade the sound quality, as fewer voltage steps are being recorded, which means a less accurate representation of the sound wave. Lossless compression (Option C) would not reduce the sound quality because all the original data is preserved. Saving the song with more bits per second (Option B) would typically improve or maintain quality, not reduce it. Transferring a file on the same computer does not degrade its quality, so Option D is incorrect.
Bit rate is a key factor in determining the fidelity of a digitally recorded sound. If the bit rate is reduced too much, the quality may suffer to a point where it is noticeable to the listener. However, for many listeners, especially when played on basic entry-level speakers or mobile devices, the difference in quality between high and low bit rate files is not significant.
Audio formats like MP3 use compression to reduce file size by using strategies such as discarding data that may not significantly affect sound quality for human ears. Contrastingly, formats such as WAV typically do not compress or only use lossless compression, thus maintaining higher sound quality but resulting in larger file sizes.
"A software package developed to handle information requirements for a specific type of business is called a horizontal application"a. true.b. false.
Answer:
false.
Explanation:
false.
A horizontal application is defined as any programme that covers a wide number of customers with various sets of skills and expertise. Since application like horizontal types can cover different sectors and can be useful in a number of industries and moreover these application are not area specific or market specific application.
When Shelly downloaded an arcade game from an unknown Internet Web site, an unauthorized connection unknown to Shelly was established with her computer. The arcade game is most likely to be ________. A. adware B. a Trojan horse C. spyware D. encryption E. a worm.
Answer:
B. a Trojan horse
Explanation:
A Trojan Horse is a malware that disguises itself as a legitimate code or software. In this scenario, Shelly downloaded what she thought was an arcade game. When the file is executed, it gives the attacker remote access to the affected computer allowing them to steal and access sensitive information on the user's computer This type of Trojan Horse malware is specifically known as a Remote Access Trojan (RAT).
Assume that an int variable counter has already been declared. Assume further a variable counterPointer of type "pointer to int" has also already been declared. Write a statement that makes counterPointer "point" to counter.
Answer:
Following are the statement:
counterPointer = &counter;
Explanation:
The following statement is correct because in the question it is given that there is an integer data type variable i.e., "counter" and there is another integer data type pointer variable i.e., "counterPointer" and finally we write a statement in which the pointer variable points to the integer variable.
To point the 'counterPointer' to 'counter', assign the address of 'counter' to 'counterPointer' using the address-of operator (&) in the form: counterPointer = &counter;.
To make a pointer called counterPointer point to an int variable called counter, use the address-of operator (&) to get the address of counter and then assign that address to counterPointer. The statement to do this in C or C++ would be:
counterPointer = &counter;This line tells the compiler to store the memory address of counter in the pointer counterPointer. Pointers are used to directly access and manipulate the memory allocated to variables, which can be more efficient or necessary for certain programming scenarios.
Which browser should you choose if you want speed, synchronization with other computers and accounts, and a simple interface?
Answer:
chrome!!!!!!!!!!!!!!
Explanation:
dont use firefox
DOS was the most common operating system for Microsoft-based computers before the introduction of Windows. DOS required the user to type instructions into the computer through an interface system known as command line. From an HCT point of view, how does the Windows operating system compare to its predecessor DOS?
Answer:
Windows has GUI, where its predecessor DOS does not.
Explanation:
DOS required the user to type instructions into the computer through an interface system known as command line.
Windows has graphical user Interface (GUI), that allows commands in a more user friendly environment than DOS.
Answer:
Windows has GUI, where its predecessor DOS does not.
Explanation:
DOS required the user to type instructions into the computer through an interface system known as command line.
Windows has graphical user Interface (GUI), that allows commands in a more user friendly environment than DOS.
Pascual specializes in fixing computers. He gets great personal satisfaction out of spending hours working on them, and he has a significant amount of computer knowledge compared to most of his friends. In developmental terms, Pascual would be considered a(n) _____ on computers.
Answer:
expert
Explanation:
Based on the information provided within the question it can be said that the Pascual would be considered an expert on computers. In developmental terms, this refers to someone that has a deep understanding in a particular field as well as the skills and experience needed through lots of practice and education in that specific field. Which in this case is computer hardware.
Which of the following is an advantage of using CSS? (choose all that apply)
-more than one HTML page in a website can use the same CSS file
-global style changes to a website can be made by editing the CSS
-new content can be written and updated to a web page automatically using CSS
-different CSS files can be used to enable a page to display well on different devices
*Answers: A, B, D
Answer:
Correct answers are option 1,2,4.
Explanation:
One css file can be reused in multiple html files to save time for similar html code.If css file is imported globally in html file it can be really useful to make design changes to the website just by changing the global css file. All the changes made in that file would be reflected in all html files where that particular stylesheet is included.
While importing a stylesheet one can link multiple stylesheets with multiple screen size so that for a particular screen size a particular stylesheet is loaded
Answer:
A, B, D
Explanation:
Just took the question and they are all right
A junior network administrator tells you that he can ping a DNS server successfully using its IP address, but he has not tested domain name lookups. What utility on the command line would you suggest your colleague use next?
a.tracerouteb.nbtstatc.ipconfigd.nslookup
Answer:
I would suggest "nslookup" utility on command line.
Explanation:
nslookup is a network administration command line tool and it is aimed for querying the Domain Name System to get domain name.
The nslookup command queries DNS servers and shows information about any DNS records.
Therefore, to test domain name lookups, one should use nslookup command.
Personal Area Network (PAN--
provides communication over a short distance that is intended for use with devices that are owned and operated by a single user);
Wireless LAN (WLAN--
a local area network that uses radio signals to transmit and receive data over distances of a few hundred feet);
Wireless MAN
(WMAN--a metropolitan area network that uses radio signals to transmit and receive data); and
Wireless WAN (WWAN--
a wide area network that uses radio signals to transmit and receive data
Answer:
All of given terms are Categories of Wireless networks.
Explanation:
Wireless networks as obvious from name are the networks having no means of physical medium such as cords, wires or cables. This gives the advantage of mobility and extension of the applications to different parts of building, block and even anywhere in word. Wireless network can be divided into four basic categories in order to differentiate between there quality and range:
Category Coverage
Wireless Personal Area Network (WPAN) | Within One personWireless Local Area Networks (WLAN) | Within a buildingWireless Metropolitan Area Networks (WMAN) | Within a cityWireless Wide Area Networks (WWAN) | Worldwide
i hope it will help you!
12.1 List three design goals for a firewall.
12.2 List four techniques used by firewalls to control access and enforce a security policy.
12.3 What information is used by a typical packet filtering firewall?
12.4 What are some weaknesses of a packet filtering firewall?
12.5 What is the difference between a packet filtering firewall and a stateful inspection firewall?
12.6 What is an application-level gateway?
12.7 What is a circuit-level gateway?
12.9 What are the common characteristics of a bastion host?
12.10 Why is it useful to have host-based firewalls?
12.11 What is a DMZ network and what types of systems would you expect to find on such networks?
12.12 What is the difference between an internal and an external firewall?
Firewall:
There are 2 type of firewall
1. Firewall which is installed with antivirus on desktop or laptop is called resident firewall, where protects end user desktop or laptop from malware and spyware attacks.
2. Physical hardware appliances which is install in in local area network and protect us from malware and spyware attack’s
12.1 1. Access point (AP) bridge Ethernet network.
2. Protect wireless access or unauthorized person.
3. Web shared key.
12.2 1. User controls
2. Direction control
3. behaviour control and
4. HTTP REQUESTS.
12.3 Source tcpip, destination tcpip
12.4 Complex configures unauthorized use, suspicious tcpip, protocols attacks and logging capacities limitations.
12.5 State inspection firewall stable connectivity for open connection. Whereas a packet filter will not do that.
12.6 Application gateways is proxy firewall provides network security
12.7 In circuit-level gateway it works as session layers in tcpip traffic.
12.9 It filters incoming traffics from mall ware and anti-spams.
12.10 To protect against threats in the corporate networks.
12.11. All access to resources from untrusted networks
12.12 Protect or permitted traffic inside networks - internal networks. Protect or block traffic at port level – external networks.
What method is overridden by the Exception class in order to provide a descriptive error message and provide a user with precise information about the nature of any Exception that is thrown?
Answer:
toString() is the correct answer to the following question.
Explanation:
ToString() function is the built in function that is used to convert the number into the string.
For example:
int n=25
var s=n.toString()
Here, we define an integer data type variable "n" and assign value to "25" then, we define the string data type variable "s" and assign n.toString() to convert number into string.
A technician is configuring a new SOHO multifunction wireless router at a customer’s location to provide network access to several wireless devices. The technician is required to protect the customer’s private network from unauthorized access while performing the initial router setup as well as during normal operation after the configuration is completed.
A. DMZB. DHCPC. ARPD. SSIDE. MAC filtering
Answer:
E. MAC filtering
Explanation:
Based on the information provided within the question it can be said that the tool that the technician must use is MAC filtering. This is a networking tool that is a security access control method, in which you can see and control the network cards that have access to the network. This would allow the technician to protect the customer's private network during and after setup.
Which one of the following is the correct code snippet for calculating the largest value in an integer array list aList?
a. int max = aList.get(0); for (int count = 1; count < aList.size(); count++) { if (aList.get(count) > max) { max = aList.get(count); } }
b. int max = 0; for (int count = 1; count < aList.size(); count++) { if (aList.get(count) > max) { max = aList.get(count); } }
c. int max = aList.get(0); for (int count = 1; count > aList.size();count++) { if (aList.get(count) >= max) { max = aList.get(count); } }
d. int max = aList[1]; for (int count = 1; count < aList.size();count++) { if (aList.get(count) > max) { max = aList.get(count); } }
Answer:
Option a. int max = aList.get(0); for (int count = 1; count < aList.size(); count++) { if (aList.get(count) > max) { max = aList.get(count); } }
is the correct code snippet.
Explanation:
Following is given the explanation for the code snippet to find largest value in an integer array list aList.
From the array list aList, very first element having index 0 will be stored in the variable max (having data type int).By using for starting from count =1 to count = size of array (aList), we will compare each element of the array with first element of the array.If any of the checked element get greater from the first element, it gets replaced in the variable max and the count is increased by 1 so that the next element may be checked. When the loop will end, the variable max will have the greatest value from the array aList.i hope it will help you!
The master production schedule for Product A shows a need for 30 units, and Product B shows a need of 25 units. To manufacture a unit of Product A, three units of component C are required. To manufacture a unit of Product B, four units of component C are required. Determine the gross requirements for component C to complete production.
Answer:
the amount of C required is 190 units of C
Explanation:
the amount of C to cover the necessity of product A is
Ca = A units required * number of C units to manufacture a unit of A
Ca = 30 unit of A * 3 units of C/ unit of A =90 units of C
to produce B the same applies
Cb = B units required * number of C units to manufacture a unit of B
Cb = 25 unit of B * 4 units of C/ unit of B =100 units of C
therefore to cover the necessities of A and also B we will need:
total units of C required = units of C to produce A + units of C to produce B
C = Ca + Cb = 90 units of C + 100 units of C = 190 units of C
C= 190 units of C
As designs incorporate new technologies, it can seem like an actor is walking through a projection or even become part of a projection on stage
A. True.
B. False.
Answer:
The answer to the given question is "True".
Explanation:
In computer science, Design is an oriented programming language, that includes text, graphics, style elements, etc. It is used to convert the projection into 3D to 2D which means a three-dimensional to two-dimensional object and uses to display the improve projection.
That's why the answer to this question is "True".
Final answer:
Yes, actors can interact with projections on stage, creating immersive experiences where they appear to walk through or become part of these projections, thanks to advanced theatrical technologies.
Explanation:
It is true that as designs incorporate new technologies, an actor can appear to walk through a projection or even become part of a projection on stage. Advances in technology, including methods such as holographic projections and advanced video effects, have significantly expanded the range of creative possibilities for theatrical productions. The incorporation of these technologies allows the creation of stunning visual narratives that can be intertwined with live performances, enhancing the overall theatrical experience.
In contemporary theatre, technologies such as computer automation, advanced lighting systems, and projection mapping have evolved to the point where scenery and actor interactions with projections can be highly sophisticated. Consider productions like Spiderman: Turn Off the Dark or War Horse, in which computerized mechanics and video effects play a crucial role in storytelling. Furthermore, the role of a scene designer has become multifaceted, encompassing aspects from artist and engineer to computer programmer and historian.
With the integration of technology, designers and performers work together to create immersive experiences for the audience, where actors seamlessly interact with digital elements. These collaborations bridge the gap between the physical world and the artistic vision, allowing spectators to immerse themselves deeper into the world of the play, transcending the limits of traditional stage design.
1. What do we mean when we say a programming language is “higher-level?” Why would a developer use a higher-level language?
A higher-level programming language is one that provides more abstraction and built-in features, making it easier to write complex programs. Developers use higher-level languages for quicker development, increased productivity, and easier maintenance of code.
Explanation:A higher-level programming language refers to a language that provides more abstraction and built-in features to the programmer, making it easier to write complex programs without worrying about low-level details like memory management. Developers use higher-level languages like Python and R because they allow for quicker development, increased productivity, and easier maintenance of code. For example, Python incorporates high-level features like dynamic typing, automatic memory management, and a large standard library, which simplifies the coding process and allows developers to focus on problem-solving.
Your computer displays the error message ""A disk read error occurred."" You try to boot from the Windows setup DVD and you get the same error. What is most likely the problem? Group of answer choices
Answer:
The answer to this question is "The boot system order is placed before the optical drive to boot from the hard drive".
Explanation:
In the question, it is defined that a computer displays an error message that is "A disk read error occurred" to solve this error firstly we boot the machine, that requests to launch the HDD process that placed before the DVD drive. For boot the machine we press function keys that are (F1 to F12).To use this process the error message problem will solve automatically.SONET: is a standard for optical transmission that currently operates at Terabit per second speeds is almost identical to the ITU-T standard, synchronous digital hierarchy (SDH) uses existing copper cabling and the PSTN network refers to Sprint Overall Network is not currently available, even in large cities
Answer:
The correct option to the following question is an option (B).
Explanation:
SONET is also known as the Synchronous Optical Network which is the optical fiber that is used to establishes digital communication and it is also the transmission system, it was evolved in the 1980's by the Bellcore in United States.
It is the subset of SDH and SDH is also known as the Synchronous Digital Hierarchy that is used for the transmission and transport the communication signals
Mailbox protocols do not include: A. Simple Mail Transfer Protocol (SMTP) B. Post Office Protocol 3 (POP3) C. Internet Message Access Protocol (IMAP) D. Internet Control Message Protocol (ICMP)
Mailbox protocols do not include: Internet Control Message Protocol (ICMP)
D. Internet Control Message Protocol (ICMP)
Explanation:
For email accounts to receive emails, end user has three type configurations. The configurations are done based on web service provider where the domain is hosted.
The following are three configurations to receive email for end user in their MS outlook or lotus dominos.
1. SMTP: - it configures to send mail to others.
2. POP3:- it is configure to receive mail from others.
3. IMAP: - some web services use these services to receive mail from others and sent to others.
We need to necessary settings in MS-outlook or lotus dominos.