Every time a search is made using keywords related to construction, search engines display text-based advertisements and links to Regan Builders, a construction firm. The marketing tool used by Regan Builders is best referred to as a ________.

Answers

Answer 1

Answer: Contextual advertisement

Explanation:

 The contextual advertisement is basically refers to the targeted advertisement that usually appear on the websites and other type of media like the advertisement content are displaying on the browser of the mobile.

 Based on the different types of context, the advisement are automatically selected by the system and the context are basically depend upon the choice of the user.

When the relevant digital content are matched with the promotional message then this process is known as the contextual advertisement.    


Related Questions

In a garments factory, a part requires 0.10 hours of labor per unit in Work Center B and 1 hour of setup time. The planned order release (order size) for a week is 2000 units.
Which of the following is the capacity requirement for a week at Work Center B?
a. 101b. 151c. 201d. 251

Answers

Answer:

201 hours.

Explanation:

Given: Order size of work for a week is 2000 units.

          Setup time is 1 hour.

Now, lets calculate the capacity requirement for a week at work centre B.

Formula; Capacity= [tex][set\ up\ time+(labour\ per\ unit \times total\ unit\ of\ work)][/tex]

Substitute the value in the formula.

⇒Capacity= [tex][1+ (0.10 \times 2000)][/tex]

⇒ Capacity= [tex][1+(200)] = 201\ hours[/tex]

201 hours is the capacity requirement for a week at work centre B.

Ford Motor Corporation is considering purchasing new technology that will increase productivity by twenty percent. If Ford Motor Corporation decides to make this investment at the going real interest​ rate, then A. the supply of loanable funds increases. B. saving increases. C. ​Ford's profits will decline. D. the quantity of loanable funds demanded increases. E. the demand for loanable funds increases.

Answers

Answer:

E. The demand for loanable funds increases.

Mix Recording Studios purchased $7,800 in electronic components from TechCom. Mix Recording Studios signed a 60-day, 10% promissory note for $7,800. If the note is dishonored, what is the amount due on the note?
a. $130
b. $7,800
c. $7,930
d. $8,050
e. $8,130

Answers

Answer:

C) $7,930

Explanation:

The amount due on the note should equal the principal and the accrued interest of the note.

The principal (the amount borrowed) of the note is $7,800.

The accrued interest is: $7,800 x (2/12) x 10% = $130.

The total amount of the note = $7,800 + $130 = $7,930

Walter builds birdhouses. He spends $5 on the materials for each birdhouse. He can build one in 30 minutes. He is semi-retired but earns $8 per hour at the local hardware store. He can sell a birdhouse for $20 each.
An Accountant would calculate the total profit for one birdhouse to be
A) $7
B) $12
C) $11
D) $15

Answers

Answer:

$15

Explanation:

Accounting profit is calculated as revenue less total cost.

Accounting profit = Revenue - Cost

$20 - $5 = $15

An accountant calculates accounting profit.

The Lin household’s annual income is $188000. Based on the U.S. federal tax rates below, what is the average tax rate for the Lin household? (Assume zero tax deductions for solving this problem.)
A. 45%
B. 24.41%
C. 22.22%
D. 33%

Answers

Answer:

24%

Explanation:

For the taxes due on April 2020 (current year taxes):

The Lin household falls under the fourth tax bracket for married individuals filing jointly:

tax rate 24%Income between $171,051 to $326,600

If no deductions were available, they would owe $188,000 x 24% = $45,120 in taxes.

Which of the following changes would bring the U.S. capital stock, currently below the Golden Rule level, closer to the steady-state, consumption-maximizing level?
- increasing the population growth rate
- increasing the saving rate
- increasing the rate of capital depreciation
- increasing the rate of technological progress

Answers

Answer:

The answer is increasing the saving rate

Explanation:

Increasing the saving rate.

The ______ approach gives upper management a quick but thorough view of the organization via four indicators:
customer satisfaction,
internal processes,
innovation and improvement activities,
and financial measures.

Answers

Answer: Balanced scorecard

Explanation:

The balanced scorecard is referred to as the strategy administration management method. It is also known to be a semi structured report. It is foremost utilized by the employees i.e. managers of the organization in order to keep the records of implementation and enforcement of the activities, which are undertaken by their employees within the authority and control , so as to monitor the circumstances arising from this.

Charlotte and Regina are opening a new business venture to sell gourmet cupcakes. One of the important characteristics in starting a limited liability company is:
a. limited liability for members.
b. the amount of start-up capital required.
c. choosing the name.
d. the number of shareholders.

Answers

Answer:

a. limited liability for members.

Explanation:

One of the important if not the most important characteristics in starting a limited liability company is limited liability for members, since the whole company structure revolves around this aspect. This refers to the shareholders being responsible for any debt incurred by the company, but only to the extent of their company shares.

Which of the following statements is CORRECT?

a. If Congress lowered corporate tax rates while other things were held constant, and if the Modigliani-Miller tax-adjusted theory of capital structure were correct, this would tend to cause corporations to decrease their use of debt.
b. A change in the personal tax rate should not affect firms' capital structure decisions.
c. "Business risk" is differentiated from "financial risk" by the fact that financial risk reflects only the use of debt, while business risk reflects both the use of debt and such factors as sales variability, cost variability, and operating leverage.
d.The optimal capital structure is the one that simultaneously (i) maximizes the price of the firm's stock, (ii) minimizes its WACC, and (iii) maximizes its EPS.
e. If changes in the bankruptcy code make bankruptcy less costly to corporations, then this would likely reduce the debt ratio of the average corporation.

Answers

Final answer:

The correct statement is that if Congress lowered corporate tax rates while other factors remain constant, corporations would likely decrease their use of debt according to the Modigliani-Miller tax-adjusted theory of capital structure.

Explanation:

The correct statement among the options provided is:

a. If Congress lowered corporate tax rates while other things were held constant, and if the Modigliani-Miller tax-adjusted theory of capital structure were correct, this would tend to cause corporations to decrease their use of debt.

The Modigliani-Miller theorem on capital structure suggests that under certain conditions, the value of a firm is not affected by whether it is financed by debt or equity. However, when taxes are introduced, the theorem is adjusted to reflect a tax benefit from interest payments.

Lower corporate taxes would reduce the tax shield benefit of debt financing, making debt less advantageous. This could lead firms to reduce their debt levels. On the other hand, personal taxes, business risks, and the effects of bankruptcy cost changes do not directly impact this specific aspect of capital structure decisions according to the Modigliani-Miller theorem.

Minako works for a large appliance manufacturing company that offers a tax-deferred retirement savings plan to each of its employees. Minako designates 10 percent of her paycheck; her employer matches $.40 for each dollar Minako investments in the plan. This type of plan is known as a(n) ____. a Roth Retirement Plan b 401(k) plan c non-traditional IRA d traditional IRA.

Answers

Answer:

The answer is letter B

Explanation:

This type of plan is known as 401(k) plan.

The short-run aggregate supply curve is relatively flat to the left of the full-employment
output because resources are difficult to bring into production.
there are shortages of capital.
there are large amounts of unused capacity and idle human resources.
there are shortages of labor.

Answers

Answer:

There are large amounts of unused capacity and idle human resources.

Explanation:

The curve is flat because there are large amounts of unused capacity and idle human resources. When the economy is operating to the left of full employment it means that is not utilizing all it's resources and not fulfilling its potential, because of this the economy has lots of idol capacity and resources and they are available for cheap, the reason for this is that the resources are abundant and thus very cheap so this makes the left of the full employment short run aggregate supply curve relatively flat.

When a dividend is not declared on preferred stock, and the common share­holders cannot receive a dividend until all past and current dividends are paid to the preferred shareholders, the preferred stock is:

Answers

Answer:

cumulative.

Explanation:

Cumulative preferred stock is defined as a type of stock that states that if any dividend payments have been missed the first payment of the owed dividends must be done to cumulative preferred shareholders in first instance

Scottie Adams Bird Supplies issued 10% bonds, dated January 1, with a face amount of $240,000 on January 1, 2018. The bonds mature in 2028 (10 years). For bonds of similar risk and maturity the market yield is 12%. Interest is paid semiannually on June 30 and December 31. What is the price of the bonds at January 1, 2018? Some relevant and irrelevant present value factors: * PV of annuity due of $1: n = 20; i = 6% is 12.15812 * PV of ordinary annuity of $1: n = 20; i = 6% is 11.46992 **PV of $1: n = 20; i = 6% is 0.31180

Answers

1234567891011121314151617181920

Jon is deciding between a job with Company A that pays $500 a week and a job with Company B that pays $550 a week. He decides to take the job with Company A, whose lower compensation is offset by its _____.

Answers

Answer:

Benefits such as health insurance and the stock options.

Explanation:

The company A is paying $500 a week whereas the Company B paying $550  a week. The company A which is paying lower compensation, it is due to that the company might be giving or proving the other benefits to the employee which can be health insurance and the stock options.

Therefore, Jon chooses to take the company A as the lower compensation is offset by the benefits like stock options , health insurance.

You buy a stock for $30 per share and sell it for $33 after holding it for slightly over a year and collecting a $0.75 per share dividend. Your ordinary income tax rate is 28% and your capital gains tax rate is 20%. Your after-tax rate of return is _________.

Answers

Answer:

The answer is:  After-tax rate of return = 9.8% .

Explanation:

Please find the calculations which are shown in details as below:

Pre-tax dividend earning is $0.75, Tax rate on ordinary income is 28% => After-tax dividend earning = 0.75 x (1 - 28%) = $0.54;

Pre-tax capitals gain is $3 ( that is, $33 -$30), tax rate on capital gains is 20% => After-tax capital gains = 3 x ( 1 - 20%) = $2.4 ;

=> Total after-tax return =   After-tax capital gains + After-tax dividend earning = 2.4 + 0.54 = $2.94 .

Thus, in percentage term,  after-tax rate of return is 2.94/30 = 9.8%.

Final answer:

To find the after-tax rate of return, we calculate the after-tax capital gain and the after-tax dividend, sum them up, and divide by the purchase price, yielding a 9.8% return.

Explanation:

To calculate the after-tax rate of return on a stock investment, we must consider both the dividend income and the capital gains, and then adjust for taxes. You purchased the stock at $30 per share and sold it at $33 per share, with a capital gain of $3 per share. Additionally, you received a $0.75 per share dividend. Since the holding period was over a year, the capital gains tax rate of 20% and the ordinary income tax rate of 28% will apply to each component respectively.

Calculating the capital gains tax:
Capital Gain = Selling Price - Purchase Price = $33 - $30 = $3 per share
Capital Gains Tax = Capital Gain x Capital Gains Tax Rate = $3 x 20% = $0.60 per share

Calculating the tax on dividends:
Dividend Tax = Dividend x Ordinary Income Tax Rate = $0.75 x 28% = $0.21 per share

Now, let's calculate the after-tax return:
After-Tax Capital Gain = Capital Gain - Capital Gains Tax = $3 - $0.60 = $2.40 per share
After-Tax Dividend = Dividend - Dividend Tax = $0.75 - $0.21 = $0.54 per share
Total After-Tax Return = After-Tax Capital Gain + After-Tax Dividend = $2.40 + $0.54 = $2.94 per share

The after-tax rate of return is calculated as follows:
After-Tax Rate of Return = (Total After-Tax Return / Purchase Price) x 100
= ($2.94 / $30) x 100 = 9.8%

Which of the following best describes a fundamental assumption when monetary policy is used to influence the economy?
A. Financial markets are efficient.
B. Money is not neutral in the short run.
C. Official rates do not affect exchange rates.

Answers

Answer: Option B

                                           

Explanation: In simple words, money neutrality refers to the theory that states change in the stock of money will only result in change in nominal variables such as prices, wages etc and will have no impact on real variables such as employment, real GDP etc.

As we know that monetary policy is implemented usually in situation of inflation and deflation. Thus, it will be no use to implement it to position macroeconomic factors such as employment etc if the money is neutral in short run.

The production function is f (L, M) = 5L1/2M1/2, where L is the number of units of labor and M is the number of machines. If the amounts of both factors can be varied and if the cost of labor is $9 per unit and the cost of using machines is $64 per machine, then the total cost of producing 12 units of output is________.

a. $438.
b. $108.
c. $576.
d. $115.20.
e. $57.60.

Answers

Answer:

The correct answer is option d.

Explanation:

The production function is given as:

f (L, M) =[tex]5L^{1/2} M^{1/2}[/tex]

The total cost will be

= wL + rM

Here, w is the cost of labor or wages and r is the cost of capital or rent.

The cost of labor is given as $9 per unit and the cost of using machine is $64 per machine.

MPl

= [tex]\frac{dQ}{dL}[/tex]

= [tex]\frac{5}{2}\frac{M}{L}^{1/2}[/tex]

MPm

= [tex]\frac{dQ}{dM}[/tex]

=  [tex]\frac{5}{2}\frac{L}{M}^{1/2}[/tex]

[tex]\frac{MPl}{MPm} = \frac{9}{64}[/tex]

[tex]\frac{M}{L} = \frac{9}{64}[/tex]

M = [tex]\frac{9}{64}L[/tex]

f (L, M) = [tex]5L^{1/2} M^{1/2}[/tex]

12 = [tex]5L^{1/2} \frac{9}{64}L^{1/2}[/tex]

12 = [tex]\frac{15L}{8}[/tex]

L = [tex]\frac{96}{15}[/tex]

L = 6.4

M = [tex]\frac{9}{64}\times 6.4[/tex]

M = 0.9

Total cost

= wL + rM

= 6.4 [tex]\times[/tex] 9 + 0.9 [tex]\times[/tex] 64

= 57.6 + 57.6

= $115.2

Final answer:

The question requires using a production function to calculate total costs for output production, but more information is needed to specify the amounts of labor and machines to find a unique solution.

Explanation:

The question involves the application of a production function to calculate the total cost of producing a certain amount of output given the costs of labor and machines. To find the total cost of producing 12 units of output, we must first determine the combination of labor (L) and machines (M) that can produce this output using the given production function, f(L, M) = 5L1/2M1/2. Once we have the values of L and M, we need to calculate the total cost by multiplying the number of units of each factor by its respective cost and summing these products. Unfortunately, in this case, there isn't enough information to solve the problem because we need either the specific amounts of L and M or additional constraints to find a unique solution. Given the context, however, if we had the values, the formula to be used would be: Total Cost = Cost of Labor × L + Cost of Machines × M.

Learn more about Production Function here:

https://brainly.com/question/39896481

#SPJ3

On December 31, 2015, Mark Inc. estimates future bad debts to be $6,500. The Allowance for Uncollectible Accounts has a credit balance of $2,500 before any year-end adjustment. What adjustment should Mark Inc. record for the estimated bad debts on December 31, 2015?

Answers

Answer:

Dr Bad Debt expense 4,000Cr Allowance for Uncollectible Accounts account 4,000

Explanation:

The ending balance of the Allowance for Uncollectible Accounts account should equal $6,500. Currently the account's balance is just $2,500, so you need to credit $4,000 more to that account in order for its ending balance to equal the bad debts expense.

So you should record the following:

Dr Bad Debt expense 4,000Cr Allowance for Uncollectible Accounts account 4,000

Since bad debts is an expense, when it increases it should be debited.

Since allowance for uncollectible accounts is a contra asset account, when it increases it should be credited.

In 2011 modern electronics produce 60,000 calculators, employing 80 workers, each of whom worked 8 hours per day. In 2012, the same firm produce 76,500 calculators, employing 85 workers, each of whom worked 10 hours per day. Productivity at Modern Electronic.
a. decresed by 4%
​b. remained constant
c. increased by 8.33%
d. increase by 27.50%

Answers

Answer:

The answer is A. Decreased by 4%.

Explanation:

Calculations are as shown below:

In the year of 2011:

Modern Electronics working hour's per day = Number of workers x working time per day = 80 x 8 = 640 hours

Number of calculators Modern Electronics made per one working hour ( that is, productivity) = 60,000 / 640 = 93.75 calculators.

In the year of 2012:

Modern Electronics working hour per day = Number of workers x working time per day = 85 x 10 = 850 hours

Number of calculators made per one working hour ( that is, productivity) = 76,500 / 850 = 90.00 calculators.

Comparision of productivity in the year 2012 over the year 2011 = 90/93.75 -1 = -4%

Thus, productivity decrease 4% in the year 2012 in comparison to the year 2011.

Anthony is in his senior year of college. He spends time creating a LinkedIn page so recruiters can more easily find him. He also goes to the university sponsored meet the firms" nights to become more acquainted with people in the corporate world. In this scenario, Anthony is investing in his"

Answers

Answer:

social capital

Explanation:

Social capital refers to your social relationships and the factors that may affect how you are perceived by your social group and how you interact with them.

In this case, since Anthony is about to graduate he wants to know some potential recruiters and/or fellow coworkers. When you graduate your world changes and the organization that you will work for becomes a very important part of your social environment and people have to learn to deal with the benefits and problems that come with such an important change.  

The controller of Hartis Corporation estimates the amount of materials handling overhead cost that should be allocated to the company's two products using the data that are given below: Wall Mirrors Specialty Windows Total expected units produced 8,000 7,000 Total expected material moves 300 900 Expected direct labor-hours per unit 5 7The total materials handling cost for the year is expected to be $38,448. If the materials handling cost is allocated on the basis of material moves, the total materials handling cost allocated to the specialty windows is closest to:
a. $28,836
b. $22,428
c. $19,224
d. $18,752

Answers

Answer:

a. $28,836

Explanation:

Total Material Moves (300 + 900)                      1200

Rate per material move (38488/1200)                      32.07333333

Allocated material moves for material handling  

wall mirrors (38488/1200*300)                              9622

Speciality windows (38488/1200*900)              28866

                                                                                    38488

Therefore, The material handling cost allocated to the speciality windows is closest to $28,836.

Final answer:

The total materials handling cost allocated to the Specialty Windows, based on the material moves, is approximately $28,836.

Explanation:

The allocation of material handling costs is a cost accounting problem where costs are split based on the cause-and-effect relationship. In this case, materials handling cost is allocated based on material moves. The total number of material moves is 1200 (300 for Wall Mirrors + 900 for Specialty Windows). So, the cost allocated per material move would be the total materials handling cost divided by total material moves, which is $38,448 / 1200. This gives us $32.04 per material move.

Now, for Specialty Windows, as there are 900 material moves, the total materials handling cost allocated to them would be 900 X $32.04, which approximates to $28,836.

Learn more about Cost Allocation here:

https://brainly.com/question/34659373

#SPJ11

A company purchased manufacturing equipment 5 years ago for $50,000. Accumulated depreciation is currently $45,000 and the remaining useful life is 3 years. The equipment incurs annual operating costs of $30,000. The company is considering replacing the equipment. The new equipment will cost $75,000, have a useful life of 3 years, and is more efficient and, therefore, only costs $10,000 to operate each year. The vendor is willing to accept the old equipment with a trade-in allowance of $10,000. The company should

Answers

Answer:

The company should keep their old equipment because if they buy the new equipment their cash flow will decrease by $5,000

Explanation:

If the company keeps the old equipment their costs will be:

$30,000 x 3 years = $90,000

total costs =  $90,000

If the company buys the new equipment their costs will be:

equipment cost = $75,000 - $10,000 = $65,000

$10,000 x 3 years = $30,000

total costs =  $95,000

The Company should not replace the old equipment due to the decrease in net income of the amount of $5,000.

Total decrease in net income

Reduction in costs=(30,000-10,000)×3 years

Reduction in costs= $20,000 x 3 years

Reduction in cost= $60,000.

Total decrease in net income=($75,000) + 10,000 + 60,000

Total decrease in net income= ($5,000)

Based on the above calculation the Company should not replace the old equipment.

Inconclusion the Company should not replace the old equipment due to the decrease in net income of the amount of $5,000.

Learn more about Total decrease in net income here:https://brainly.com/question/10955397

The responsibility report of Alejandro Garcia, the manager of one of the divisions of an auto parts manufacturing company, includes profits as well as return on investment and residual income. Alejandro is most likely the manager of a(n)_________.A. revenue center B. investment center C. cost center D. profit center

Answers

Answer:

B. investment center

Explanation:

Investment center is a business unit which contributes directly to the profitability of company using the capital the company provided.

Therefore, Alejandro is most likely the manager of a investment center.

Kinsi Corporation manufactures three different products. All five of these products must pass through a stamping machine in its fabrication department. This machine is Kinsi's constrained resource. Kinsi would make the most profit if it produces the product that:

A. uses the lowest number of stamping machine hours.
B. generates the highest contribution margin per unit.
C. uses the highest number of stamping machine hours.
D. generates the highest contribution margin per stamping machine hour.

Answers

Answer:

D.

Explanation:

Based on the information provided within the question it can be said that the Kinsi would make the most profit if it produces the product that generates the highest contribution margin per stamping machine hour. In other words producing products that provide higher profits after discounting all the costs associated with production, for every machine hour of stamping.

Dobry Die & Mold, Inc., enters into a contract with Chet's Refitting Service to fix Dobry's precisely engineered molding equipment. If Chet's delays the repair for five days, knowing that Dobry will lose a certain percentage of profit for the delay, Dobry might be awarded consequential damages toa. establish, as a matter of principle, that Chet's acted wrongfully.b. provide Dobry with funds for a foreseeable loss beyond the contract.c. provide Dobry with funds for its loss of the bargain.d. punish Chet's and set an example to deter others from similar acts.

Answers

Answer:

I suppose that when Dobry and Chet's entered a contract there was a time set for the reparations to begin, maybe not to end the repairs since that may vary, but at least to start working on them and try to do it fast.

If Chet's delayed their work and did not start repairing Dobry's equipment on time (5 days), then Dobry should be able to sue for consequential damages in order to recover money due to a foreseeable loss beyond the contract. If Dobry cannot operate its equipment then it cannot produce, so it is Chet's fault that their production is halted.

"The correct answer is b. provide Dobry with funds for a foreseeable loss beyond the contract.

In contract law, consequential damages are designed to compensate a party for losses that are a foreseeable consequence of the breach, but not directly caused by the breach itself. In this scenario, Dobry Die Mold, Inc. has suffered a loss due to Chet's Refitting Service's delay in repairing the equipment. This delay has resulted in a loss of profit, which is a foreseeable consequence of the breach of contract by Chet's.

a. Consequential damages are not primarily awarded to establish that a party acted wrongfully; that is more in line with nominal damages or punitive damages. The focus of consequential damages is on compensating the non-breaching party for actual losses.

b. This is the correct rationale for consequential damages. They are meant to compensate the non-breaching party (Dobry) for losses that were foreseeable at the time the contract was made, which in this case includes the loss of profit due to the delay.

C. Providing funds for the loss of the bargain would be compensating Debry for the difference between the value of the promised performance and the value of the performance actually received. This is more in line with expectation damages, not consequential damages.

d. While punitive damages can be awarded to punish a wrongdoer and deter others, consequential damages are not punitive in nature. They are compensatory, aiming to make the non-breaching party whole for losses that were a foreseeable result of the breach.

Therefore, the most appropriate choice is option b, which correctly identifies the purpose of consequential damages as providing funds to Dobry for a foreseeable loss beyond the contract itself, such as the loss of profits due to the delay in repairing the equipment."

Bonita Industries wishes to issue $6900000 (par value) of its 7%, 10-year bonds. The bonds pay interest annually on January 1. The current yield rate on such bonds is 12%. Using the interest factors below, compute the amount that Bonita will realize from the sale (issuance) of the bonds.

Answers

Answer:

The amount that Bonita will realize from the sale is  $4,950,673.06  

Explanation:

Hi, first, we need to find the amount to be paid by the bond (coupon), that is 7%*$6,900,000=$483,000. Now, we can use the following formula.

[tex]Price=\frac{Coupon((1+YTM)^{n}-1) }{YTM(1+YTM)^{n} } +\frac{FaceValue}{(1+YTM)^{n} }[/tex]

Where:

YTM = 0.12

n = 10

Face Value = $6,900,000

Coupon = $483,000

Price = what Bonita

Therefore:

[tex]Price=\frac{483,000((1+0.12)^{10}-1) }{0.12(1+0.12)^{10} } +\frac{6,900,000}{(1+0.12)^{10} }=4,950,673.06[/tex]

Best of luck.

WILL GIVE BRAINLIEST ANSWER!!!! plus 100 points
Because of the tender meat required, which of these cooking methods are the most expensive?

A. Braising and frying
B. Grilling and sautéing
C. Steaming and broiling
D. Baking and roasting
Incorrect answer: C
Reference: Section 1.2

Answers

I'd assume grilling and sautéing.

Answer:

B. Grilling and Sautéing

What event in 2011 caused manufacturers in several industries worldwide to wait 6 months or longer to see their supply chains working normally​ again?

A. German tornado
B. Chinese flood
C. U.S. hurricane
D. Japanese earthquake and tsunami

Answers

Answer:

D) Japanese earthquake and tsunami

Explanation:

On March 11, 2011, a 9.1 magnitude earthquake occurred a couple hundred miles from Tokyo in the ocean. This earthquake caused a huge tsunami (30 feet high) that damaged large coastal areas in Japan, including several nuclear reactors and factory centers for major corporations like Toyota, Honda, Nissan, Toshiba, Sony, Canon, etc.

Haley is a corporate certified public accountant (CPA) working on a new budget. When she lists the company’s liabilities, which of the following will she include? Entry field with incorrect answer Computer software Owners’ equity Marketable securities Employees’ wages and salaries

Answers

Answer:

None of the listed items would fall under the category of a liability

Explanation:

A liability is a present obligation that entails an outflow of economic resources (e.g cash) to settle. For an item to be classified as a liability it must relate to an event that had happened (i.e in the past) and not the future.

Computer software is likely an asset of a company. The payment for same, if not made already, can then be a liability.

Owners' equity is a contribution by the owner to further the business objectives.

Marketable securities are assets of the company, precisely current assets since it is assumed that they can be convertible to cash in a short while.

Employees' wages and salaries are expenses. It is only when they have not been paid as at when due i.e when the performance obligation has been satisfied (e.g workers have worked for a full month to which the salary relates) that it becomes a liability.

A business practice associated with globalization involves businesses moving manufacturing and service centers to countries where labor is cheap. This practice is commonly known as:
A. Relocation
B. Restructuring
C. Economizing
D. Outsourcing

Answers

Answer:

Outsourcing.

Explanation:

Outsourcing is a process to get the work done from a foreign supplier at a cheaper rate without or minimum compromising on the quality of work. Outsourcing is done by companies of those countries, where labour rate is high or scarcity of labour in the national market. It also diverse the culture of companies. Work which are outsourced to other countries are mainly non fundamental and its role is to provide support to the core company.

Other Questions
which western power colonized most of the western part of North and South America? Brazil Australia spain Hui ____.a. are Chinese-speaking Muslims who are concentrated in the provinces of Gansu, Ningxia, and Yunnan.b. is the Chinese term for the thousands of South Asian guest workers who come to China each year in search of better economic opportunities.c. is a type of wet rice cultivation that is practiced in the valleys of Japan.d. is the Chinese equivalent of the Japanese belief system Shinto. e. is the capital city of North Korea. What causes ozone depletion? A. Flying airplanes especially at high altitudes. B. Combustion of a sulfur containing fuel like coal. C. CFCs leaking from old refrigerators and air conditioners. D. Deforestation especially in mountainous regions. in kite PODS, m The age of Noelle's dad is 6 less than 3 times Noelle's age. The sum of their ages is 74 . Find their ages. Provide your answer below: $$ Noelle: , Noelle's Dad A major theme of f. Scott fitzgeralds work was the idea that the post-war world Brisco Bricks purchases raw material from its foreign supplier, Bolivian Clay, on May 8. Payment of 2,000,000 foreign currency units (FC) is due in 30 days. May 31 is Brisco's fiscal year-end. The pertinent exchange rates were as follows:May 8 Spot rate: $ 1.25 May 31 Spot rate: $ 1.26 Jun. 7 Spot rate: $ 1.20 For what amount should Brisco's Accounts Payable be credited on May 8? :Mrs. Maxwell is buying pencils for her students. She has 3 classes of 28 students each. For Valentines Day, she wants to give each of her students 4 pencils. She can purchase packs of 18 pencils for $2.52. How many packs of pencils will Mrs. Maxwell need to purchase? Justify your answer. The design style for a ____________ play may have exaggerated scenery and outrageous colors to match the exaggerated nature of the acting. Mr.Mole left his burrow and started digging his way down at a constant rate The concept that large masses warp the shape of spacetime and thus change the path of an object moving through that spacetime applies to all objects. As such, Einsteins theory of general relativity predicts that light will also curve around massive objects as it travels through space. Does Newtons law of gravity agree with that prediction? Note that the mass of a photon is zero. As governor, Marcy has decided that anyone who works but earns less than $20,000 a year will have their health insurance premiums paid for by the government. How does this affect the equilibrium price and quantity of medical services?a. Diminishing returnsb. Moral Hazardc. Market Failured. Adverse Selectione. Principle-agent problem Whats the answer to the top question and steps how to solve? Of the numbered selections above, which are examples of parallelism?to lay down for my God, and for my kingdom, and my peopleI myself will take up arms, I myself will be your general, judge, and rewarder of every one of yourvirtues in the fieldof my God, of my kingdom, and of my peopleAll of the above A heating coil inside an electric kettle delivers 2.2 kW of electrical power to the water in the kettle. How long will it take to raise the temperature of 0.50 kg of water from 30.0 C to 72.0 C Broadleaf deciduous trees of temperate forests A) Have small leaves to conserve energy. B) reabsorb chlorophyll, resulting in the colorful autumn pigments becoming visible. C) grow slower than narrow-leaved trees during summer months. D) are the only type of plant life found in this biome. Problem 12: A 20.0-m tall hollow aluminum flagpole is equivalent in strength to a solid cylinder 4.00 cm in diameter. A strong wind bends the pole much as a horizontal force of 1100 N exerted at the top would. How to the side does the top of the pole flex? Combine like terms to create an equivalent expression. 4\left(1.75y-3.5\right)+1.25y4(1.75y3.5)+1.25y4, left parenthesis, 1, point, 75, y, minus, 3, point, 5, right parenthesis, plus, 1, point, 25, y Which property is used in the following expression? 3(6+5)=18+15A.associative property of multiplication B.commutative property of additionC.associative property of additionD.distributive Use rounding to estimate the difference of 18.14 - 9.88.