Find ΔE° for the reaction below if the process is carried out at a constant pressure of 1.00 atm andΔV (the volume change) = -24.5 L. (1 L ∙ atm = 101 J)
2 CO(g) + O2 (g) → 2 CO2(g) ΔH° = -566. kJ

a. +2.47 kJ
b. -568 kJ
c. -2.47 kJ
d. -564 kJ

When 150 ml of 0.500 M silver nitrate are added to 100 mL of 0.400 M potassium chromate, a silver chromate precipitate forms. Considering the stoichiometry of the reaction and the quantities of reactants, 24.88 grams of silver chromate will precipitate.

The subject of this question is based on precipitation reactions in Chemistry. Precipitation reactions occur when two solutions combine to form an insoluble solid known as a precipitate. The moles of silver nitrate present in a 150 mL of 0.500 M solution can be calculated using the formula Molarity = Moles ÷ Volume (in Litres).

Thus, Moles of AgNO3 = 0.500 M * 0.15 L = 0.075 mol AgNO3. According to the reaction equation 2AgNO3 + K2CrO4 → 2AgCrO4(precipitate) + 2KNO3, for every mole of K2CrO4, we have two moles of AgNO3. Thus, based on stoichiometry and the given quantities of the reactants, the limiting reactant will be AgNO3, and it will totally react and form the silver chromate precipitate. The moles of Ag2CrO4 formed would therefore also be 0.075 mol. To convert this into grams, we use the molar mass of Ag2CrO4, which is approximately 331.73 g/mol. Hence, grams of Ag2CrO4 = 0.075 mol Ag2CrO4 * 331.73 g/mol = 24.88 g Ag2CrO4.

https://brainly.com/question/29762381

#SPJ12

Explanation:

The given data is as follows.

     mass = 0.158 g,      volume = 100 ml

     Molarity = 1.0 M,      [tex]\Delta T[/tex] = [tex](32.8 - 25.6)^{o}C = 7.2^{o}C[/tex]  

The given reaction is as follows.

         [tex]Mg(s) + 2HCl(aq) \rightarrow MgCl_{2}(aq) + H_{2}(g)[/tex]  

So, moles of magnesium will be calculated as follows.

         No. of moles = [tex]\frac{mass}{\text{molar mass}}[/tex]                            

                               = [tex]\frac{0.158 g}{24.305 g/mol}[/tex]

                               = [tex]6.5 \times 10^{-3}[/tex]

                               = 0.0065 mol

Now, formula for heat released is as follows.

              Q = [tex]m \times C \times \Delta T[/tex]

                  = [tex]\text{volume} \times \text{density} \times C \times \Delta T[/tex]

                  = [tex]100 ml \times 1.0 g/ml \times 4.184 \times 7.2^{o}C[/tex]

                  = 3010.32 J

Hence, heat of reaction will be calculated as follows.

            [tex]\Delta H_{rxn} = \frac{\text{-heat released}}{\text{moles of Mg}}[/tex]

                      = [tex]\frac{3010.32 J}{0.0065 mol}[/tex]

                      = -4.63 J/mol

or,                  = [tex]-463 \times 10^{-5} kJ/mol[/tex]                (as 1 kJ = 1000 J)

Thus, we can conclude that heat of given reaction is [tex]-463 \times 10^{-5}[/tex] kJ/mol.    

Answer:

v = 37.9 ml

Explanation:

Given data:

Mass of compound = 1.56 kg

Density = 41.2 g/ml

Volume of compound = ?

Solution:

First of all we will convert the mass into g.

1.56 ×1000 = 1560 g

Formula:

D=m/v

D= density

m=mass

V=volume

v = m/d

v =  1560 g / 41.2 g/ml

v = 37.9 ml

The volume of the compound is 37.86 mL.

Volume is the capacity of an object.

To calculate the volume of the compound, we use the formula below.

Formula:

Where:

make v the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, the volume of the compound is 37.86 mL.

Learn more about volume here: https://brainly.com/question/1972490

#SPJ5

Answer: The workdone W = 505J

Explanation:

Applying the pressure-volume relationship

W= - PΔV

Where negative sign indicates the power is being delivered to the surrounding

W = - 1.0atm * ( 5.88 - 0.9)L

= - 1.0atm * (4.98)

W = -4.98 atmL

Converting to Joules

1atmL = 101.325J

-4.98atmL = x joules.

Work done in J = -4.98 * 101.325

W= -505J

Therefore the workdone is -505J

Because we do not know if the value of the change in free energy will be positive or negative.  It is not possible to determine without more information.

Option E

Heat Energy is simply defined as an energy that is moved from one body to another using the concept of difference temperature changes.

Generally, the equation for the change in enthalpy  is mathematically given as

ΔG = ΔH - T ΔS

In conclusion, we do not know the magnitude of positive or positive value and hence, we do not know if the value of the change in free energy will be positive or negative.

Read more about Kinetic energy

https://brainly.com/question/999862

When 3.60 g of aluminum reacts with hydrochloric acid at STP, approximately 4.48 liters of hydrogen gas is produced. This is calculated using stoichiometry and the conditions of STP, which state that one mole of any gas occupies 22.4 liters.

To calculate the volume of hydrogen gas produced when 3.60 g of Al reacts with hydrochloric acid, stoichiometry and the concept of Standard Temperature and Pressure (STP) can be used. Firstly, we need the molar mass of Al, which is approximately 26.98 g/mol. The number of moles of Al in 3.60 g can be calculated by dividing the mass by the molar mass. This gives us approximately 0.133 mol of Al. From the balanced chemical equation, we know that every 2 moles of Al produces 3 moles of H2, so 0.133 mol of Al would produce approximately 0.200 mol of H2.

As per the conditions of STP (Standard Temperature and Pressure), one mole of any gas occupies a volume of 22.4 liters. Therefore, 0.200 mol of H2 would occupy a volume of 0.200 * 22.4 L, which approximates to 4.48 L. So, when 3.60 g of aluminum reacts with hydrochloric acid under the conditions of STP, roughly 4.48 liters of hydrogen gas would be produced.

https://brainly.com/question/29423406

#SPJ12

Answer:

Green

Explanation:

In the visible spectrum, which ranges from around 400-700 nm wavelength, the lower wavelength corresponds to the violet side of rainbow spectrum and, high wavelength corresponds to red side. As our solution absorbs highly at around 440 and 600 nm, it means that violet side and red side of the spectrum should be absorbed and would not be visible. the lowest absorbance at around 520 nm corresponds to green color, and therefore, it should be the colour visible from the solution

The solution would appear yellow-green in color due to the maximum and minimum absorbances observed in the visible spectrum.

The solution would appear yellow-green in color. The visible spectrum ranges from approximately 400 nm (violet) to 750 nm (red) with different colors corresponding to specific wavelengths. In this case, the maximum absorbances around 440 nm and 600 nm, and the minimum absorbance between 510 and 540 nm would indicate that the solution primarily absorbs light in the blue and red regions, resulting in the complementary color of yellow-green being observed.

https://brainly.com/question/18958986

#SPJ11

Answer:

The molecules of Fe formed are 3.37 ₓ10²⁴

Explanation:

The reaction is this one:

Fe + CuSO₄ --> Cu + FeSO₄

And the ratio for the reaction is 1:1

If 5.6 moles of iron react, you will have 5.6 moles of FeSO₄. By the way, you should use NA to calculate the number of molecules.

1 mol ____ has ___ 6.02x10²³

5.6 moles _______ (5.6 x 6.02x10²³) = 3.37 ₓ10²⁴

Answer: 77.4 mL

Explanation:

Combined gas law is the combination of Boyle's law, Charles's law and Gay-Lussac's law.

The combined gas equation is:

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = initial pressure of dry gas = (760 - 17.5) mmHg= 742.5 mm Hg

[tex]P_2[/tex] = final pressure of dry gas at STP =  760 mm Hg

[tex]V_1[/tex] = initial volume of dry gas = 85.0 mL

[tex]V_2[/tex] = final volume of dry gas at STP = ?

[tex]T_1[/tex] = initial temperature of dry gas = [tex]20^oC=273+20=293K[/tex]

[tex]T_2[/tex] = final temperature of dry gas at STP = [tex]0^oC=273+0=273K[/tex]

Now put all the given values in the above equation, we get the final volume of wet gas at STP

[tex]\frac{742.5mmHg\times 85.0ml}{293K}=\frac{760mmHg\times V_2}{273K}[/tex]

[tex]V_2=77.4mL[/tex]

Volume of dry gas at STP is 77.4 mL.

Answer:

Mixture

Explanation:

Brass is an alloy. An alloy is a combination of two or more metals that gives rise to another metal to give a more desirable end product metal.

The metals combined are only physically combined. They still retain their individual properties. Although the compositions are varied, it is only varied to produce desired properties and not to alter any chemical combination as in the case of compounds.

It is important to note that there are no chemical combinations between these metals.

Answer:

See explanation below

Explanation:

First, you are not providing any data about the mass of ice and the innitial temperature of water, so, I'm gonna use data from a similar exercise, so in order for you to get the accurate and correct answer, just replace the data in this procedure, and you should be fine.

Now, For this exercise, I will assume we have an 8 g ice cube pounded into 230 g of water. The expression to use here is the following:

q = m*Cp*ΔT (1)

Solving for ΔT:

ΔT = q / m*Cp (2)

Where:

q: heat of the water

m: mass of water

Cp: specific heat of water which is 4.18 J /g °C

Now, we don't know the heat emmited by water, we need to calculate that. To do this, we have data for ice and water, so, let's find first the heat absorbed by the melting ice, and then, the water.

Converting the grams into moles, using the molar mass of water which is 18 g/mol rounded:

moles of ice = 8 g / 18 g/mol = 0.44 moles of water

Now, we'll use the molar heat of fusion of water to convert the moles to kJ:

qi = 0.44 mol * 6.02 kJ/mol =¨2.6488 kJ

Now, as the ice is the system and water the surroundings, the melting of ice in endothermic therefore the heat of water should be the same of ice but negative, therefore:

qi = -qw = -2.6488 kJ or -2648.8 J

Finally, replace this value in equation (2) to get the temperature change:

ΔT = -2648.8 / (230 * 4.18)

ΔT = -2.75 °C

Now, use your data of ice and water and replace them here in this procedure to get the correct and accurate answer.

Explanation:

The bond order is defined as number of electron pairs present in a bond of the two atoms.

The formula of bond order is given by:

= [tex]\frac{1}{2}\times (\text{Number of bonding electrons}-\text{Number of anti-bonding electrons})[/tex]

1)  [tex](\sigma 1 s )^2 ( \sigma 1 s*)^2 (\sigma 2s )^2 ( \sigma 2 s*)^2 ( \sigma 2 p )^2 ( \pi2 p )^4 (\pi 2 p *)^2 [/tex]

Number of bonding electrons = 10

Number of anti-bonding electrons = 6

The bond order : [tex]\frac{1}{2}\times (10-6)=2[/tex]

2) [tex]( \sigma 1 s )^2 ( \sigma 1 s * )^2 ( \sigma 2 s )^2[/tex]

Number of bonding electrons = 4

Number of anti-bonding electrons = 2

The bond order : [tex]\frac{1}{2}\times (4-2)=1[/tex]

The bond order can be determined from the molecular electron configurations by counting the number of bonding and antibonding electrons and calculating the bond order as (number of bonding electrons - number of antibonding electrons)/2.

The bond order can be determined from the molecular electron configurations. In this case, the electron configuration given is ( σ 1 s ) 2 ( σ 1 s * ) 2 ( σ 2 s ) 2 ( σ 2 s * ) 2 ( σ 2 p ) 2 ( π 2 p ) 4 ( π 2 p * ) 2. We need to count the number of bonding and antibonding electrons to calculate the bond order. The number of bonding electrons is the sum of the electrons in all the bonding molecular orbitals. In contrast, the number of antibonding electrons is the sum of the electrons in all the antibonding molecular orbitals. The bond order is then calculated as (number of bonding electrons - number of antibonding electrons)/2. In this case, the bond order is (2+2+2+4-2)/2 = 4/2 = 2, indicating a double bond.

https://brainly.com/question/12447843

#SPJ3

Explanation:

mole ratio of base to acid is 1:1 hence same moles of NaOH required to neutralize HCl

Answer:

A solution that is 0.100 M (i.e. 33,12 g of lead (II) nitrate in 1.00 L of water) yields the desired total dissolved ions concentration.

Explanation:

The molecular formula of lead (II) nitrate is Pb(NO[tex]Pb(NO_{3} )_{2}[/tex] and its molecular mass is 331,2 g/mol.

In disolution, the equilibrium will look like this:

Pb(NO[tex]Pb(NO_{3} )_{2}[/tex] -> [tex]Pb^{2+}  + 2(NO)_{3} ^{-1}[/tex]

The equation above means that, one mol of lead (II) nitrate dissolved in 1L will yield one mol of Pb ions and 2 moles of NO3 ions, i.e. 3 moles total.

If we dissolve 0.100 moles of lead (II) nitrate in 1.00 L of water, the stoichiometry of the disolution states that in turn, it will yield 0.100 of Pb ions and 0.200 moles of NO3 ions, i.e. 0.300 M in total dissolved ions.

331,2 g/mol * 0.100 mol/L * 1 L = 33,12 grams of the compound are required.

C3.

Tes

Example 8

Name each ionic compound.

CaCl2

AlF3

Co2O3

Solution

Using the names of the ions, this ionic compound is named calcium chloride. It is not calcium(II) chloride because calcium forms only one cation when it forms an ion, and it has a characteristic charge of 2+.

The name of this ionic compound is aluminum fluoride.

We know that cobalt can have more than one possible charge; we just need to determine what it is. Oxide always has a 2− charge, so with three oxide ions, we have a total negative charge of 6−. This means that the two cobalt ions have to contribute 6+, which for two cobalt ions means that each one is 3+. Therefore, the proper name for this ionic compound is cobalt(III) oxide.

Test Yourself

Name each ionic compound.

Sc2O3

AgCl

Answers

scandium oxide

silver chloride

How do you know whether a formula—and by extension, a name—is for a molecular compound or for an ionic compound? Molecular compounds form between nonmetals and nonmetals, while ionic compounds form between metals and nonmetals. The periodic table (Figure 3.2 “A Simple Periodic Table”) can be used to determine which elements are metals and nonmetals.

There also exists a group of ions that contain more than one atom. These are called polyatomic ions. Table 3.7 “Common Polyatomic Ions” lists the formulas, charges, and names of some common polyatomic ions. Only one of them, the ammonium ion, is a cation; the rest are anions. Most of them also contain oxygen atoms, so sometimes they are referred to as oxyanions. Some of them, such as nitrate and nitrite, and sulfate and sulfite, have very similar formulas and names, so care must be taken to get the formulas and names correct. Note that the -ite polyatomic ion has one less oxygen atom in its formula than the -ate ion but with the same ionic charge.

Table 3.7 Common Polyatomic Ions

Name Formula and Charge  Name Formula and Charge

ammonium NH4+  hydroxide OH−

acetate C2H3O2−, or CH3COO− nitrate NO3−

bicarbonate (hydrogen carbonate) HCO3− nitrite NO2−

bisulfate (hydrogen sulfate) HSO4− peroxide O22−

carbonate CO32− perchlorate ClO4−

chlorate ClO3− phosphate PO43−

chromate CrO42− sulfate SO42−

cyanide CN− sulfite SO32−

dichromate Cr2O72− triiodide I3−

The naming of ionic compounds that contain polyatomic ions follows the same rules as the naming for other ionic compounds: simply combine the name of the cation and the name of the anion. Do not use numerical prefixes in the name if there is more than one polyatomic ion; the only exception to this is if the name of the ion itself contains a numerical prefix, such as dichromate or triiodide.

Writing the formulas of ionic compounds has one important difference. If more than one polyatomic ion is needed to balance the overall charge in the formula, enclose the formula of the polyatomic ion in parentheses and write the proper numerical subscript to the right and outside the parentheses. Thus, the formula between calcium ions, Ca2+, and nitrate ions, NO3−, is properly written Ca(NO3)2, not CaNO32 or CaN2O6. Use parentheses where required. The name of this ionic compound is simply calcium nitrate. Write the proper formula and give the proper name for each ionic compound formed between the two listed ions. cause the ammonium ion has a 1+ charge and the sulfide ion has a 2− charge, we need two ammonium ions to balance the charge on a single sulfide ion. Enclosing the formula for the ammonium ion in parentheses, we have (NH4)2S. The compound’s name is ammonium sulfide.

Because the ions have the same magnitude of charge, we need only one of each to balance the charges. The formula is AlPO4, and the name of the compound is aluminum phosphate.

Neither charge is an exact multiple of the other, so we have to go to the least common multiple of 6. To get 6+, we need three iron(II) ions, and to get 6−, we need two phosphate ions. The proper formula is Fe3(PO4)2, and the compound’s name is iron(II) phosphate.

Test Yourself

Write the proper formula and give the proper name for e

Answer: check explanation.

Explanation:

The three elements/metals, that is Calcium, Barium and Magnesium all belongs to group 2A on the periodic table. Other elements/metals of group 2A in the periodic table are; Beryllium, Strontium and Radium.

As one go down the group, the atomic radius increases from Magnesium to Barium(this is because of the increase in number of shells of electrons). And, as one go down the group the first ionization energy decreases.Because of this decease in ionization energy it makes it easier for the valence electrons to be removed and thus, REACTIVITY INCREASES DOWN THE GROUP.

Ca^2+ + 2OH^- --------> Ca(OH)2.

Mg^2+ + 2OH^- ---------> Mg(OH)2.

PS: The Na^+ is a spectator ion.

Explanation:

Hence, molecules of a solid have low energy.

This means that in kinetic molecular theory molecules of a gas are in rapid, random motion.

                 [tex]P\propto \frac{1}{V}[/tex]     (at constant temperature and number of moles)

                 [tex]V\propto T[/tex]     (at constant pressure and number of moles)

Thus, we can conclude that the given items are matched as follows.

1.  gas - continuously in motion.

2. solid matter - low energy.

3. Kinetic Molecular Theory - rapid, random motion.

4. Boyle's Law - relates pressure and volume.

5. Charles's Law - relates volume and temperature.

The balanced chemical equations for the reactions are

(a) K₂O + H₂O  → 2KOH

(b) P₂O₃ + 3H₂O → 2H₃PO₃

(c) Cr₂O₃ + 6HCl → 2CrCl₃ + 3H₂O

(d) SeO₂ + 2KOH → K₂SeO₃ + H₂O

From the question

We are to write a balanced equations for the given reactions

The reaction between potassium oxide and water gives potassium hydroxide

The balanced chemical equation for the reaction between potassium oxide and water is

K₂O + H₂O  → 2KOH

The reaction between diphosphorus trioxide with water gives phosphorous acid

The balanced chemical equation for the reaction between diphosphorus trioxide with water is

P₂O₃ + 3H₂O → 2H₃PO₃

The reaction between chromium(III) oxide with dilute hydrochloric acid produces chromium(II) chloride and water

The balanced chemical equation for the reaction between chromium(III) oxide with dilute hydrochloric acid is

Cr₂O₃ + 6HCl → 2CrCl₃ + 3H₂O

The reaction between selenium dioxide with aqueous potassium hydroxide gives potassium selenite and water

The balanced chemical equation for the reaction between selenium dioxide with aqueous potassium hydroxide

SeO₂ + 2KOH → K₂SeO₃ + H₂O

Hence, the balanced chemical equations for the reactions are

(a) K₂O + H₂O  → 2KOH

(b) P₂O₃ + 3H₂O → 2H₃PO₃

(c) Cr₂O₃ + 6HCl → 2CrCl₃ + 3H₂O

(d) SeO₂ + 2KOH → K₂SeO₃ + H₂O

Learn more here: https://brainly.com/question/24246394

A balanced reaction equation contains the same number of atoms of each element on both sides of the reaction equation.

To write a balanced chemical reaction equation, the number of atoms of each element on the right hand side must be the same as the number of atoms of the same element on the left hand side.

Learn more: https://brainly.com/question/11969651

Answer:

There is 117.4 kJ of heat absorbed

Explanation:

Step 1: Data given

Number of moles CS2 = 1 mol

Temperature = 25° = 273 +25 = 298 Kelvin

Heat absorbed = 89.7 kJ

It takes 27.7 kJ to vaporize 1 mol of the liquid

Step 2: Calculate the heat that is absorbed

C(s) + 2S(s) → CS2(l)    ΔH = 89.7 kJ  (positive since heat is absorbed)

CS2(l) → CS2(g)           ΔH = 27.7 kJ  (positive since heat is absorbed)

We should balance the equations, before summing, but since they are already balanced, we don't have to change anything.

C(s) + 2S(s)---> CS2 (g)

ΔH = 89.7 + 27.7 = 117.4 kJ

There is 117.4 kJ of heat absorbed

Answer:

For a: The mass percent of NaBr is 7.03 %

For b: The mass percent of KCl is 16.94 %

For c: The mass percent of toluene is 13.43 %

Explanation:

To calculate the mass percentage of solute in solution, we use the equation:

[tex]\text{Mass percent of solute}=\frac{\text{Mass of solute}}{\text{Mass of solution}}\times 100[/tex]         .......(1)

We are given:

Mass of NaBr (Solute) = 5.50 g

Mass of solution = 78.2 g

Putting values in equation 1, we get:

[tex]\text{Mass percent of NaBr}=\frac{5.50g}{78.2g}\times 100\\\\\text{Mass percent of NaBr}=7.03\%[/tex]

Hence, the mass percent of NaBr is 7.03 %

We are given:

Mass of KCl (Solute) = 31.0 g

Mass of water (solvent) = 152 g

Mass of solution = (31.0 + 152) g = 183 g

Putting values in equation 1, we get:

[tex]\text{Mass percent of KCl}=\frac{31.0g}{183g}\times 100\\\\\text{Mass percent of KCl}=16.94\%[/tex]

Hence, the mass percent of KCl is 16.94 %

We are given:

Mass of toluene (Solute) = 4.5 g

Mass of benzene (solvent) = 29 g

Mass of solution = (4.5 + 29) g = 33.5 g

Putting values in equation 1, we get:

[tex]\text{Mass percent of toluene}=\frac{4.5g}{33.5g}\times 100\\\\\text{Mass percent of toluene}=13.43\%[/tex]

Hence, the mass percent of toluene is 13.43 %

To calculate the percent by mass of the solute in each aqueous solution, divide the mass of the solute by the mass of the solution and multiply by 100%

To calculate the percent by mass of the solute in each aqueous solution, you'll need to use the formula:

Percent by mass = (mass of solute/mass of solution) x 100%

For example, in solution (a) with 5.50 g of NaBr in 78.2 g of solution, the mass of the solute is 5.50 g and the mass of the solution is 78.2 g. Plugging these values into the formula gives:

Percent by mass = (5.50 g / 78.2 g) x 100% = 7.03%

Similarly, you can calculate the percent by mass for solutions (b) and (c) using the same formula.

https://brainly.com/question/32087803

#SPJ11

Answer:

Electromagnetic Force

Explanation:

Every aspect of chemical reaction is the output of electromagnetic force though the forces can take on many forms because of the quantum wave nature of particles.

The electromagnetic force has the ability to attract opposite charges such as protons and electrons and it repels same charges such as electrons and protons.

This force is an important force in the chemical reaction as it it is responsible for bonding between atoms. Though other forces are unique in their own way but they don't affect chemical reaction. Force of gravity is not strong enough to affect chemical reactions; when nuclear forces are involved in a reaction, such reaction is a nuclear reactor; not chemical reaction.

One of the roles of the electromagnetic force in chemical reaction is that it holds the electrons that are in the outer orbit around the nucleus; this, in the long run creates bonds with other chemical elements to create a visible matter.

The electromagnetic force is the principal force underlying all chemical reactions. It governs the interactions between charged particles in atoms and molecules, leading to the formation and breaking of chemical bonds.

The fundamental force underlying all chemical reactions is the electromagnetic force. This force is responsible for the interactions between charged particles which make up atoms and molecules. For example, in a chemical reaction, atoms or molecules rearrange to create new substances. This rearrangement involves the breaking and forming of chemical bonds, which are effectively governed by electromagnetic forces. This is due to the fact that electrons (which are negatively charged) are attracted to the nuclei of atoms (which are positively charged) which encourages them to stay within certain regions of space (creating what we know as chemical bonds).

https://brainly.com/question/10763830

#SPJ6

Answer: Chipless RFID tags

Answer:

1.0 L

Explanation:

Given that:-

Mass of [tex]CaC_2[/tex] = [tex]2.54\ g[/tex]

Molar mass of [tex]CaC_2[/tex] = 64.099 g/mol

The formula for the calculation of moles is shown below:

[tex]moles = \frac{Mass\ taken}{Molar\ mass}[/tex]

Thus,

[tex]Moles= \frac{2.54\ g}{64.099\ g/mol}[/tex]

[tex]Moles_{CaC_2}= 0.0396\ mol[/tex]

According to the given reaction:-

[tex]CaC_2_{(s)} + 2H_2O_{(l)}\rightarrow C_2H_2_{(g)} + Ca(OH)_2_{(aq)}[/tex]

1 mole of [tex]CaC_2[/tex] on reaction forms 1 mole of [tex]C_2H_2[/tex]

0.0396 mole of [tex]CaC_2[/tex] on reaction forms 0.0396 mole of [tex]C_2H_2[/tex]

Moles of [tex]C_2H_2[/tex] = 0.0396 moles

Considering ideal gas equation as:-

[tex]PV=nRT[/tex]

where,

P = pressure of the gas = 742 mmHg  

V = Volume of the gas = ?

T = Temperature of the gas = [tex]26^oC=[26+273]K=299K[/tex]

R = Gas constant = [tex]62.3637\text{ L.mmHg }mol^{-1}K^{-1}[/tex]

n = number of moles = 0.0396 moles

Putting values in above equation, we get:

[tex]742mmHg\times V=0.0396 mole\times 62.3637\text{ L.mmHg }mol^{-1}K^{-1}\times 299K\\\\V=\frac{0.0396\times 62.3637\times 299}{742}\ L=1.0\ L[/tex]

1.0 L of acetylene  can be produced from 2.54 g [tex]CaC_2[/tex].

About 1 liter of acetylene gas can be produced from 2.54 g of calcium carbide under the given conditions of 742 mmHg and 26C.

The question requires you to calculate the volume of acetylene gas produced from a known amount of calcium carbide using the given reaction under specified conditions. To answer this, we need to use the principles of stoichiometry combined with the ideal gas law. First, we need to convert the mass of CaC2 to moles because stoichiometry deals with mole ratios. The molar mass of CaC2 is around 64.1 g/mol so 2.54 g of CaC2 is around 0.04 moles. From the balanced equation, we can see that one mole of CaC2 produces one mole of C2H2. Therefore we also have 0.04 moles of acetylene gas produced.

Next, we use the ideal gas law (PV=nRT) to find the volume of acetylene gas produced. Here P is pressure, V is volume, n is the moles of gas, R is the ideal gas constant, and T is temperature. The pressure should be in atmospheres, so we convert 742 mmHg to around 0.97 atm. The temperature should be in kelvin, so we convert 26C to around 299K. The value for R is 0.0821 L·atm/mol·K.

Plugging in our values into the equation gives (0.97 atm x V) = (0.04 mol x 0.0821 L x atm/mol x K x 299K). Solving for V gives approximately 0.983 L or about 1 liter of acetylene gas under these conditions.

https://brainly.com/question/14499259

#SPJ11

Answer:

85%

Explanation:

Firstly, we will need to calculate the molar mass of the molecule. We simply use the atomic masses of each of the elements. The atomic masses are as follows:

C = 12

H = 1

O = 16

N = 14

S = 1

All units are in a.m.u

The molecular mass is thus:

(135 × 12) + (96 × 1) + (16 × 9) + 14 + 32 = 1906g/mol

The percentage by mass of carbon = (135 × 12)/1906 × 100% = 85%

Final answer:

The percentage by mass of carbon (C) in coal, given the formula C135H96O9NS, is approximately 84.97%.

Explanation:

To calculate the percentage by mass of carbon (C) in coal using the approximate formula C135H96O9NS, we first need to determine the molar mass of the entire compound, and then compare it to the mass of just the carbon atoms within the compound. The atomic masses for C, H, O, N, and S are roughly 12.01 g/mol, 1.008 g/mol, 16.00 g/mol, 14.01 g/mol, and 32.07 g/mol, respectively.

To find the molar mass of C135H96O9NS:

C: 135 atoms × 12.01 g/mol = 1621.35 g/mol

H: 96 atoms × 1.008 g/mol = 96.768 g/mol

O: 9 atoms × 16.00 g/mol = 144.00 g/mol

N: 1 atom × 14.01 g/mol = 14.01 g/mol

S: 1 atom × 32.07 g/mol = 32.07 g/mol

The total molar mass of the coal formula is therefore 1621.35 + 96.768 + 144.00 + 14.01 + 32.07 = 1908.198 g/mol.

To calculate the percentage of carbon in the compound:

Percentage of C = (Mass of C / Molar mass of compound) × 100

Percentage of C = (1621.35 g/mol / 1908.198 g/mol) × 100 ≈ 84.97%

Therefore, the percentage by mass of carbon in coal for this given formula is approximately 84.97%.

Answer:

CaCl2

The charge can be +3 or +2

Explanation:

It takes two atoms of chloride and 1 atom of calcium to make this compound

Answer: chemical formula is CaCl2.

CaCl2------> Ca^2+ + Cl^-1

Explanation:

+2 for calcium ion and -1 for the chlorine ion.

For K2Cr2O7

The oxidation state of chromium=

(+1×2) + 2x + (-2×7) = 0

+2+2x-14= 0

2x= 12

x= 12/2

x=+6.

Therefore, the oxidation number of Chromium, Cr in K2CrO7 is +6

According to Newton’s first law of motion,if there is no net force acting on an object that is moving at a constant 30 mph speed, the object will continue to move at 30 mph.

Option a

"Newton's first law of motion" states that an object at a stationary position or an object moving at a constant velocity continues its state of rest or of motion unless it is acted upon by an "external unbalanced resisting force".

Since the net force acting on this object is zero; the absence of any kind of force (neither internal nor external) is observed and hence the motion at constant 30 mph velocity will continue until it is resisted.

Answer:

0.52g

Explanation:

To calculate the mass of acetylene collected, we can calculate the number of moles of acetylene collected and multiply this by the molar mass of acetylene.

To calculate the number of moles of acetylene collected, we can use the ideal gas equation I.e PV = nRT

Rearranging the equation, n =PV/RT

We now identify each of the terms below before substituting and calculating.

n = number of moles, which we are calculating.

R = molar gas constant = 62.64 L.Torr. K^-1. mol^-1

V = volume = 459ml : 1000ml ÷ 1L, hence , 459ml = 459/1000 = 0.459L

T = temperature = 23 degrees Celsius = 273 + 23 = 296K

P = pressure. But since the gas was collected over water, we subtract the vapour pressure of water from the total pressure = 760 - 21 = 739torr

We substitute these values into the equation to yield the following:

n = (739 × 0.459) ÷ ( 62.64 × 300)

n = apprx 0.02 moles

To calculate the mass of acetylene collected, we need the molar mass of acetylene. The molecular formula of acetylene = C2H2, atomic mass of carbon = 12 and atomic mass of hydrogen = 1, thus , the molar mass = 2(12) + 2(1) = 26g/mol

Thus the mass of acetylene collected = 0.02 mole × 26g/mol = 0.52g

Answer:

3(NH₄)₂CrO₄ (aq)  +  2Cr(NO₂)₃ (aq)  →  6NH₄NO₂ (aq)+  Cr₂(CrO₄)₃ (aq)

Explanation:

Answer:

Organic Material

Explanation:

Carbon Dating is the process in which the age of a piece of organic matter is determined by the proportions of carbon isotopes it contains.

Carbon dating requires that the object being tested contains carbon-14 (14C) isotopes.

Carbon-14 is a radioactive isotope of carbon that is present in the Earth's atmosphere in small amounts. Living organisms, including plants and animals, take in carbon-14 through the process of photosynthesis or by consuming other organisms.

Once an organism dies, it no longer takes in carbon-14, and the concentration of carbon-14 in its remains gradually decreases over time due to radioactive decay.

By measuring the remaining amount of carbon-14 in a sample, scientists can determine the age of an object or organism.

Learn more about Carbon dating, here:

https://brainly.com/question/32047290

#SPJ6

Answer:

[tex]5.788\times 10^{-9} m[/tex] is the uncertainty in the position of a moving electron.

Explanation:

Heisenberg's uncertainty principle is given by the equation:

[tex]\Delta x\times m\times \Delta v=\frac{h}{4\pi}[/tex]

The mass of an electron = m

Uncertainty in velocity =  Δv

Uncertainty in position =  Δx

h = Planck's constant

We are given:

The mass of an electron = m = [tex]9.11\times 10^{-31} kg[/tex]

Uncertainty in velocity =  Δv = [tex]0.01 \times 10^6 m/s[/tex]

Uncertainty in position =  Δx

[tex]\Delta x=\frac{h}{4\pi \times m\times \Delta v}[/tex]

[tex]=\frac{6.626\times 10^{-34} Js}{4\times 3.14\times 9.11\times 10^{-31} kg\times 0.01 \times 10^6 m/s}[/tex]

[tex]=5.788\times 10^{-9} m[/tex]

[tex]5.788\times 10^{-9} m[/tex] is the uncertainty in the position of a moving electron.

The uncertainty in the position of an electron is equal to [tex]5.76 \times 10^{-9}\; meters[/tex]

Given the following data:

To find the uncertainty in the position of an electron, we would use Heisenberg's uncertainty principle:

Mathematically, Heisenberg's uncertainty principle of an object is given by the formula:

[tex]\Delta x \times m \times \Delta v = \frac{h}{4\pi }[/tex]

Where:

Making [tex]\Delta x[/tex] the subject of formula, we have:

[tex]\Delta x = \frac{h}{4\pi \times m \times \Delta v}[/tex]

Substituting the given parameters into the formula, we have;

[tex]\Delta x = \frac{6.626 \times 10^{-34}}{4\times \;3.142 \;\times \;9.11 \times 10^{-31}\; \times \;0.01 \;\times 10^{6}}\\\\\Delta x = \frac{6.626 \times 10^{-34}}{1.15 \times 10^{-25}}\\\\\Delta x = 5.76 \times 10^{-9}\; meters[/tex]

Read more: https://brainly.com/question/16901506