Given the reaction: cu(s) + 4hno3(aq) → cu(no3)2(aq) + 2no3(g) + 2h2o(l )as the reaction occurs, what happens to copper?

Compared to sulphuric acid, carboxylic acids are much weaker, this is because of their overall characteristic with respect to pKa, they do not dissociate completely as to all be in their conjugate base form but will have equal amounts in both.

Sulfuric acid is a strong polyprotic acid, and has a pKa value that is even smaller than the carboxylic acid.

Oil of vitriol, also known as sulfuric acid is a mineral acid made up of the elements hydrogen, oxygen, and sulfur, and has the chemical formula H2SO4.

It is a viscous liquid that is miscible with water. It has no color or smell. Due to its strong affinity for water vapor, pure sulfuric acid does not naturally occur; it is hygroscopic and rapidly absorbs water vapor from the air.

Therefore, Compared to sulphuric acid, carboxylic acids are much weaker, this is because of their overall characteristic with respect to pKa, they do not dissociate completely as to all be in their conjugate base form but will have equal amounts in both.

To learn more about Sulfuric acid, refer to the link:

https://brainly.com/question/29303579

#SPJ2

Answer: 1 M

Explanation:

Molarity : It is defined as the number of moles of solute present per liter of the solution.

Formula used :

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n= moles of solute

[tex]Moles=\frac{\text{Given mass}}{\text{Molar mass}}=\frac{85.0g}{170g/mol}=0.5moles[/tex]  

[tex]V_s[/tex] = Volume of solution in ml

Now put all the given values in the formula of molarity, we get

[tex]Molarity=\frac{0.5moles\times 1000}{500ml}=1mole/L[/tex]

Therefore, the molarity of solution will be 1 M.

The freezing point is the temperature at which the fluid freezes to a solid form. The freezing point of the solution is -0.435 degrees celsius.

The freezing point is the product of the molality, van 't Hoff factor, and the cryoscopic constant. It is given as,

[tex]\rm \Delta T_{F} = K_{F} \times b\times i[/tex]

Given,

Mass of water = 0.1 kg

Mass of sucrose = 8.0 gm

Moles of sucrose are calculated as:

[tex]\begin{aligned}\rm moles &= \dfrac{8.0}{342.3}\\\\&= 0.0233 \;\rm mol \end{aligned}[/tex]

The molality of sucrose is calculated as:

[tex]\begin{aligned}\rm b &= \dfrac{\text{moles of sucrose}}{\text{mass of water}}\\\\&= \dfrac{0.0233 \;\rm mol}{0.1}\\\\&= 0.233 \;\rm m\end{aligned}[/tex]

The freezing point depression is calculated as:

[tex]\begin{aligned}\rm \Delta T &= 0.233 \;\rm m \times 1.86\; ^{\circ} \;\rm C/m\\\\&= 0.435 ^{\circ}\;\rm C\end{aligned}[/tex]

Therefore, the freezing point of a solution is -0.435 degrees celsius.

Learn more about a freezing point here:

https://brainly.com/question/17091798

Complete the following table.

Acid Molarity Moles of H⁺ released per liter

HCl 1

H2SO4 1

H3PO4 1

H2SO4 0.5

H3PO4 3

HNO3 2

[Answer]

1

2

3

1

9

2

When solid aluminum acetate (Aluminum Ethanoate) is put into water, it dissociates into its constituent ions, resulting in the following reaction:

Aluminum Acetate (solid) → Aluminum ions [tex]\rm (Al^3^+)[/tex] + Acetate ions [tex]\rm (CH_3COO^-)[/tex]

When solid aluminum acetate (also known as aluminum ethanoloate) is added to water, aluminum ions [tex]\rm (Al^3^+)[/tex] and acetate ions[tex]\rm (CH_3COO^-)[/tex]are produced. The attraction between the ions and the polar water molecules causes this separation. Hydration is the process through which water molecules surround these ions.

Due to the presence of freely moving ions that promote the flow of electric current, the resulting solution develops into a powerful electrolyte that can conduct electricity. Aluminum acetate dissociates and ionizes in water, which contributes to its function as a powerful electrolyte in aqueous solution and facilitates a variety of chemical and electrochemical reactions.

Learn more about hydration, here:

https://brainly.com/question/33722672

#SPJ12

Paramagnetic can be detected by the unpaired electrons in the electron configuration. In this case, out of Sc³⁺, Br⁻, Mg²⁺, and Se, only Se (Selenium) is paramagnetic because it has unpaired electrons.

The substances in question are Sc³⁺ (Scandium ion), Br⁻ (Bromide ion), Mg²⁺ (Magnesium ion) and Se (Selenium). To determine if these species are paramagnetic, we need to look at their electronic configurations.

Sc³⁺ (Scandium ion) has an atomic number of 21. When it loses 3 electrons to form the cation Sc³⁺, it has the same electron configuration as Argon, with all shells filled, therefore it is diamagnetic, not paramagnetic.

Br⁻ (Bromide ion) is the ion formed when Bromine (atomic number 35) gains one electron. This results in a complete electron shell, and so bromide ion is diamagnetic, not paramagnetic.

The  Mg²⁺ (Magnesium ion) is formed when Magnesium (atomic number 12) loses 2 electrons. This results in a complete electron shell, making this species diamagnetic as well.

Lastly, Se (Selenium) with an atomic number of 34 has 4 unpaired electrons in its ground state and therefore is paramagnetic.

So, out of Sc³⁺, Br⁻, Mg²⁺, and Se, only Se (Selenium) is paramagnetic.

https://brainly.com/question/32580044

#SPJ3

Answer:

E°cell = 0.94 V

Ecell = 1.00 V

ΔG = -1.9 × 10⁵ J

ΔG° = -1.8 × 10⁵ J

Explanation:

Let's consider this electrochemical cell:

Sn(s)|Sn²⁺(aq,0.0155M)||Ag⁺(aq, 3.50M)|Ag(s)

The corresponding half-reactions are:

Oxidation (anode): Sn(s) → Sn²⁺(aq) + 2 e⁻              E°red = -0.14 V

Reduction (cathode): 2 Ag⁺(aq) + 2 e⁻ → 2 Ag(s)    E°red = 0.80 V

The standard cell potential (E°cell) is the difference between the standard reduction potential of the cathode and the standard reduction potential of the anode.

E°cell = E°red, cat - E°red, an = 0.80 V - (-0.14 V) = 0.94 V

We can find the cell potential using the Nernst equation.

Ecell = E°cell - (0.05916/n) . log Q

Ecell = 0.94 V - (0.05916/2) . log ([Sn²⁺]/[Ag⁺]²)

Ecell = 1.00 V

We can find ΔG and ΔG° using the following expressions.

ΔG = -n.F.Ecell = (-2mol).(96468J/mol.V).(1.00V) = -1.9 × 10⁵ J

ΔG° = -n.F.E°cell = (-2mol).(96468J/mol.V).(0.94V) = -1.8 × 10⁵ J

The net cell equation for the electrochemical cell is Sn(s) + 2Ag+ -> Sn₂+ + 2Ag. To find the standard cell potential, standard free energy change, free energy change, and cell potential at 25.0 °C, we use standard reduction potentials and the Nernst equation. Standard free energy change is calculated with ΔG°rxn = -nFE°cell, while the cell potential under non-standard conditions is found using the Nernst equation.

The net cell equation for the given electrochemical cell is Sn(s) + 2Ag+ (aq) → Sn₂+ (aq) + 2Ag(s). To calculate the standard cell potential (E°cell), standard free energy change (ΔG°rxn), free energy change (ΔGrxn), and the cell potential (Ecell) at 25.0 °C, we can use the standard reduction potentials and the Nernst equation. The standard cell potential is calculated by subtracting the standard reduction potential of the anode from that of the cathode.

The standard free energy change can be calculated from the standard cell potential using the formula ΔG°rxn = -nFE°cell, where n is the number of moles of electrons transferred in the reaction, and F is the Faraday constant. The cell potential under non-standard conditions (Ecell) can be determined using the Nernst equation, which incorporates the concentration of the ionic species involved in the half-reactions.

https://brainly.com/question/31955958

#SPJ3

Final answer:

Vinegar contains acetic acid, an organic compound classified as a carboxylic acid, due to the presence of a carboxyl group with both a carbonyl and a hydroxyl group attached to the same carbon atom.

Explanation:

Vinegar is an example of an organic compound called a carboxylic acid. Its functional group is known as the carboxyl group, which features a carbonyl group (a carbon atom double-bonded to an oxygen atom) and a hydroxyl group (an oxygen atom single-bonded to a hydrogen atom) attached to the same carbon. This unique structure with the general formula RCOOH is characteristic of carboxylic acids such as acetic acid (CH₃COOH), which gives vinegar its sour taste and pungent smell.

The presence of the carboxylic acid functional group distinguishes it from other compounds like amines, which contain nitrogen; aldehydes, which have the carbonyl group bonded to at least one hydrogen atom; and esters, which have the carbonyl group bonded to an oxygen atom that is in turn connected to another carbon group.

Acetic acid is a well-known carboxylic acid found in vinegar and has been used since ancient times for various purposes, from a condiment and a preservative to even an antibiotic and a detergent.

Not filtering a saturated solution before titrating will likely cause the calculated Ksp to be a) too high

When a student does not filter their saturated solution before titrating, the calculated Ksp (solubility product constant) will likely be affected.

Specifically, the Ksp will probably be too high.

This is because the undissolved solid present in the unfiltered solution will falsely contribute to the ionic concentration being measured during the titration, leading to an overestimation of the dissolved ions and thus a higher calculated Ksp.

As a result, to ensure accurate determination of the Ksp, it is essential to filter the solution to remove any undissolved solute before conducting the titration.

Complete question is - A student does not filter his/her saturated solution before titrating. will the calculated ksp probably be (a) too high, (b) too low, or (c) unaffected? why?

Answer:

Kinetic energy of a system .

Explanation:

Hello,

The temperature is a measure of the average kinetic energy of the atoms or molecules in the system as long as it accounts for the movement of the particles composing the system, thus, the higher the temperature, the higher the kinetic energy as the atoms or molecules could move faster and vigorously.

Best regards.

Answer:1.80 x 10^24

Explanation:

The nuclide produced when uranium-238 decays by alpha emission is thorium-234. This process involves the emission of an alpha particle, which causes uranium-238 to lose 2 protons and 2 neutrons, resulting in thorium-234.

The nuclide produced when uranium-238 decays by alpha emission is thorium-234. This decay process involves the release of an alpha particle from uranium-238 nucleus. An alpha particle is equivalent to a helium nucleus - it contains 2 protons and 2 neutrons. Therefore, when uranium-238 (which has 92 protons and 146 neutrons) emits an alpha particle, it loses 2 protons and 2 neutrons, transforming into a new element with 90 protons and 144 neutrons, which is thorium-234 (234 90Th).

https://brainly.com/question/27870937

#SPJ12

The hybrid orbitals used by sulfur in SCl2 are sp3. These are formed due to bonding with two chlorine atoms, and the presence of a lone pair.

The hybrid orbitals used by sulfur in SCl2 are sp3 hybrid orbitals. In SCl2, sulfur uses three of its valence electrons to form sigma bonds with two chlorine atoms and the remaining two are used to form a lone pair. Hence, we have total 4, i.e., the hybridization of S in SCl2 is sp3.

https://brainly.com/question/34727132

#SPJ6

Breaking solvent-solvent attractions and breaking solute-solute attractions : endothermic process

Forming solute-solvent attractions : exothermic process

In mixing the two solutions, it will require energy to break the attraction of each solution and create a new attraction that produces energy.

If both are equal then there will be no heat released or received so that the delta H solution is 0, which indicates that the solution is ideal

The ideal solution occurs if the attractive force between the molecules is the same as the attractive force of each solute and solvent

There are 2 kinds of deviations from Raoult's Law,

Occurs if the attractive strength between each mixture forming agent is stronger than the attractive in the mixture

(X-X, Y-Y> X-Y)

This deviation produces a positive enthalpy of solution (ΔH +) which is endothermic

Occurs if the attractive force in the mixture is stronger than the attractive force of each substance

(X-Y> X-X, Y-Y)

This deviation produces an enthalpy of a negative value solution (ΔH -) which is exothermic

So that breaking solvent attractions and breaking attraction solutes require energy so it is called an endothermic process

While forming solute-attraction attractions will release heat so-called exothermic process

Raoult's law

brainly.com/question/10165688

Deviation from Raoult's Law

brainly.com/question/13004684

When heat is added to a substance  

brainly.com/question/3417580