HELPPP WILL GIVE BRAINLIEST

The scientist Robert Boyle observed that a gas can expand to fill its container. Explain how Boyle's observation is explained by the Kinetic Theory of Matter.

Answers

Answer 1
Kinetic Theory of matter explains the physical behavior of matter, in our case the behavior of gases. All important postulates regarding different properties of gases are as follow;

1)  Sizes of Gas particles are very small, small enough to be considered as neglegible.

2)  Kinetic energy of gas paricles is greater than that of Solids and liquids.

3)  Distance between gas molecules is very large. That is why Boyle observed that a gas can expand to fill entire container.

4)  Collisions take place between gas molecules and with the walls of container causing them to create pressure.

5)  Forces of attraction between gas molecules is negligible, therefore they don't interact and never come close to each other.

6) Gravity has almost zero effect on the molecules of gas.

Related Questions

A ping pong ball with a dent in it can be put into a pan of boiling water. After a short amount of time, the dent will pop out. Explain why this occurs.

Answers

Because when temperature increases, volume increases. In terms of this, the temperature increasing would be the boiling water since its hot will push the volume up and in result pop the volume of the ping pong ball back into its shape.

Answer:

The right option is; b. the water caused an increase in temperature of the air inside the ball and an increase in pressure.

The dent (hollow area formed by pressing or hitting) from the ping-pong ball disappeared because energy was transferred from the hot boiling water in which the ball was placed to the air inside the ball. This transferred energy will increase the temperature of the air inside the ball and the air molecules will begin to move faster with a greater force. Hence, causing an increase in pressure.

Explanation:

How many milliliters of .45m hcl will neutralize 25ml of 1m koh?

Answers

The  number of  Ml  of 0.45m HCl needed to neutralize  25 ml  of 1 ml KOH  is  calculated  as below

find the moles of KOH  used =  molarity  x volume

= 1  x25 = 25 moles
write the reacting  equation

KOH +HCL = KCl + H2O

by  use   of  mole ratio  between  KOH to HCl  which is 1:1 therefore the  moles of 25 moles

volume of HCl = moles/molarity

 25/0.45 = 55.6 ml  of HCL


the balanced equation for the reaction is as follows;
HCl + KOH ---> KCl + H₂O
stoichiometry of HCl to KOH is 1:1
number of KOH moles reacted - 1 mol/L x 0.025 L = 0.025 mol 
according to 1:1 molar ratio 
number of KOH moles reacted = number of HCl moles reacted 
therefore number of HCl moles reacted - 0.025 mol

molarity of HCl is 0.45 M
since 0.45 mol  are in 1000 mL 
therefore 0.025 mol are in a volume of 0.025 mol / 0.45 mol/L  = 55.5 mL 
55.6 mL of HCl is required to neutralise 

Calculate the amounts requested if 3.30 mol Fe2O3 completely react according to the following equation. Fe2O3 + 2Al --> 2Fe + Al2O3
a. moles of aluminum needed
b. moles of iron formed
c. moles of aluminum oxide formed

Answers

A. Moles of Aluminum needed;

Reaction is as follow,

                                Fe₂O₃ + 2 Al      →    2 Fe + Al₂O₃ 
According to eq,

                              1 mole Fe₂O₃ required  =  2 mole of Al
So,
                       3.30 mol Fe₂O₃ will require  =  X moles of Al

Solving for X,
                     X  =  (2 mol × 3.30 mol) ÷ 1 mol

                     X  =  6.6 mol of Al

B. Moles of Iron formed:

According to eq,

                              1 mole Fe₂O₃ produced  =  2 mole of Fe
So,
                       3.30 mol Fe₂O₃ will produce  =  X moles of Fe

Solving for X,
                     X  =  (2 mol × 3.30 mol) ÷ 1 mol

                     X  =  6.6 mol of Fe

C. Moles of Aluminum Oxide formed:

According to eq,

                              1 mole Fe₂O₃ produced  =  1 mole of Al₂O₃
So,
                       3.30 mol Fe₂O₃ will produce  =  X moles of Al₂O₃

Solving for X,
                     X  =  (1 mol × 3.30 mol) ÷ 1 mol

                     X  =  3.30 mol of Al₂O₃

See the picture to answer the question
the solid line is the results obtained when no catalyst was used and the broken line is the results obtained when a catalyst was used .how much energy must the system absorb for the reaction to start if no catalyst was used?

Answers

Above is a potential energy curve of a reaction. It depicts conversion of reactant to product via transition state.

When a catalyst is added to the reaction system, energy barrier of reaction decreases.

It must be noted that energy barrier reaction is defined as energy difference between  reactant and transition state.

In present case, energy of reactant is 200 kj, while that of transition state (in absence of catalyst) is 650 kj

Thus, energy barrier of reaction is 650 - 200 = 450 kj

Hence, system must absorb 450 kj of energy for the reaction to start, if no catalyst was used

What volume of 0.205 m k3po4 solution is necessary to completely react with 130 ml of 0.0116 m nicl2?

Answers

Following chemical reaction is involved for the reaction between K3PO4 and NiCl2

2K3PO4 + 3NiCl2 → 6KCl + Ni3(PO4)2

Volume of solutions is converted to litres for present calculations (1litre = 1000ml)
number of moles of NiCl2 = 0.130 × 0.0116
                                          =0.001508 mol

Now, [tex] \frac{\text{mole of NiCl2 }}{\text{mole of K3PO4}} = \frac{3}{2} [/tex]
∴ mole of K3PO4 = [tex] \frac{0.001508X2}{3} [/tex]
=0.001005 mol
given that, K3PO4 is 0.205 M
i.e. 0.205 mol of K3PO4 is present in 1 litre of solution
then 0.001005 mol is present in X litre of solution
∴X = [tex] \frac{0.001005}{0.205} [/tex] =0.004902 litre =4.902ml



How many grams of MgCl2 will be obtained when 435 mL of 0.300 M HCl react with an excess of Mg(OH)2?

Answers

The grams of Mg(OH)2 produced is calculated as below

calculate the moles of HCl produced =molarity  xvolume/1000

= 0.3 x 435/1000= 0.1305 moles

write the equation for reaction
Mg(OH)2 +2HCl = MgCl2 + 2H2O

by use of mole ratio between HCl :MgCl2  which is 2 :1  the  moles of HCl =  0.1305 x1/2 =0.0653  moles of MgCl2

mass of MgCl2 = moles x molar mass

= 0.0653mol x95 g/mol = 6.204  grams of MgCl2

Why could a diet low in carbohydrates be dangerous?


A-The increased level of starches would provide excess energy.

B-The body could break down proteins from muscles for energy.

C-The increased level of fats could provide too many vitamins.

D-The body could take in too much dietary fiber, which harms cells.


Answers

B-The body could break down proteins from muscles for energy.

Answer: Option B.

Explanation:

Low diet carbohydrates are the diets that limits the consumption of carbohydrates.

In low diet carbohydrates, food rich in carbohydrates are replaced by fat or proteins and suggested for the effective plan for weight loss.

Carbohydrates act as primary source of energy, in the absence of less amount of carbohydrates, body breaks down protein and fat into ketone for primary energy source that allows the body to undergo state called ketosis.

Thus, The correct answer is option B.

4
Amelia is classifying plants in science lab. Her teacher describes a plant that has leaves, stems, roots, and that produces fruit.

How should Amelia classify the plant?
A.
moss
B.
non-flowering plant
C.
fern
D.
flowering plantAmelia is classifying plants in science lab. Her teacher describes a plant that has leaves, stems, roots, and that produces fruit. How should Amelia classify the plant

Answers

The answer is D. The teacher describes the plant by saying it has leaves, stems, roots, and fruit. stems are vascular tissue so it can't be C, B, or A.

Answer:

D.  flowering plant

Explanation:

Option A is incorrect because moss is a thalloid plant with no true plant body.

Option B is incorrect because the plant could not have produced fruits without flowering.

Option C is incorrect because ferns do not produce fruits.

The correct option is D. Flowering plants produce fruits and posses true leaves, stems and roots. The ovule of the flower becomes the seed after fertilization and the ovary becomes the fruit.

What is the chemical formula for the compound tetraphosphorus decasulfide?

Answers

P S
4 10

you just use the roots given in the molecular formula

The chemical formula for tetraphosphorus decasulfide is P4S10, consisting of four phosphorus atoms and ten sulfur atoms in the compound.

The chemical formula for the compound tetraphosphorus decasulfide is P4S10.

Phosphorus forms various compounds with different stoichiometries, and in this case, tetraphosphorus decasulfide consists of four phosphorus atoms bonded with ten sulfur atoms.

It is crucial to understand chemical formulas to identify elements and their quantities in compounds accurately.

A 55.50 g gas sample of a gas, at stp, has a volume of 15.0 l. calculate the molecular mass of the gas

Answers

Answer is: the molar mass of gas is 82.83 g/mol.
m(gas) = 55.50 g; mass of gas.
V(gas) = 15.0 L; volume of gas.
Vm = 22.4 L/mol; molar volume of gas on STP.
n(gas) = V(gas) ÷ Vm.
n(gas) = 15 L ÷ 22.4 L/mol.
n(gas) = 0.67 mol; amount of gas.
M(gas) = m(gas) ÷ n(gas).
M(gas) = 55.5 g ÷ 0.67 mol.
M(gas) = 82.83 g/mol.


Final answer:

The molecular mass of the gas is approximately 80.15 g/mol.

Explanation:

To calculate the molecular mass of the gas, we first need to determine the number of moles of the gas. We can use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

At STP (standard temperature and pressure), the pressure is 1 atm and the temperature is 273 K.

The volume of the gas is given as 15.0 L. We can rearrange the equation to solve for n, the number of moles:

n = PV / RT.

Substituting the given values, we have:

n = (1 atm) * (15.0 L) / (0.0821 L·atm/mol·K * 273 K).

Calculating this gives us n

= 0.6926 mol.

To calculate the molecular mass, we can divide the mass of the gas sample (55.50 g) by the number of moles (0.6926 mol).

Learn more about Molecular mass here:

https://brainly.com/question/34129603

#SPJ6

What is a functional group?


a group of organic molecules that work together to speed up reactions


a group of living things that are made up of organic compounds


a group of organs in the body that work together to perform a certain function


a group of atoms bonded to carbon that determines how the molecule will react



Answers

I believe the answer is D. a group of atoms bonded to carbon that determines how the molecule will react

A functional group is a group of atoms within a molecule that interacts in predictable ways with other molecules; together functional groups and carbon skeletons determine the properties of organic molecules.

Answer:

A group of atoms bonded to carbon that determines how the molecule will react

Explanation:

Functional groups are atom or groups of atom attached to the organic compound in a specific manner.

Some of the examples of functional groups are:

-COOH, -Cl, -OH, -NO2, -COCl, -C=O, etc.

Functional groups determines the characteristics chemical properties of a organic compound.

The different organic compounds having same functional group undergoes same or similar type of reaction.

The ph of lemon juice is approximately 2.40. at this ph, the hydronium ion concentration is closest to which concentration? 4.0 × 10¯3 m 0.38 m 5.6 × 10¯4 m 2.5 × 10¯12 m

Answers

pH = -log[H₃O⁺(aq)]

here the pH is given as 2.40.

Hence,
  2.40               = -log[H₃O⁺(aq)]
log[H₃O⁺(aq)]  = -2.40
[H₃O⁺(aq)]       = 3.98 x 10⁻³ M
                        = 4.0 x 10⁻³ M

Hence, the hydronium ion concentration in juice is 4.0 x 10⁻³ M.

Since, the pH is less than 7, the juice is acidic.

Which would show an example of how physical changes are reversible ?

Answers

Water freezes into ice, and then ice melts.
Water evaporates and then vapors condenses into liquid water again.

Answer:

Non-destructive physical changes

Explanation:

Hi, this is not a rule but most of the non-destructive physical changes are reversible.

In that group of changes you may find:

State changes (solidification, evaporation, etc.)Adsortion and desortionTemperature changes Mixtures

Think of a physical change and then try to figure out which process can reverse that.  

Use the changes in oxidation numbers to identify which atoms are oxidized and which are reduced in each reaction.

Answers

You didn't include much information as to what you were referring too, however I answered a similar question recently to a friend so I'm hoping this is the same question in complete as to yours, if not I apologize.

a.) 2Na(s) + Cl2(g) -----> 2NaCl(s) 
Na --> Na+1 is oxidized 
Cl2 --> Cl- is reduced 

b.) 2HNO3(aq) + 6HI(aq) ----> 2NO(g) + 3I2(s) + 4H2O(l) 
N+5 --> N+2 is reduced 
I-1 --> I2 is oxidized 

Final answer:

By assigning oxidation numbers, it is determined that Sr and O in H₂O are oxidized, while S in SO₃ and Kr are reduced in the given reactions. This identifies the substances undergoing oxidation and reduction.

Explanation:

To identify what is being oxidized and what is being reduced in each redox reaction, we first assign oxidation numbers to each atom in the reaction. The element whose oxidation number increases is oxidized, acting as the reducing agent. Conversely, the element whose oxidation number decreases is reduced, acting as the oxidizing agent.

Sr + SO₃ → SrSO₃: Sr goes from 0 to +2 (oxidized), and S in SO₃ goes from +4 to +6 (reduced).2KrF₂ + 2H₂O → 2Kr + 4HF + O₂: Kr goes from +2 to 0 (reduced), O in H₂O goes from -2 to 0 (oxidized).SO₃ + SCl₂ → SOCl₂ + SO₂: S in SO₃ goes from +6 to +4 in SO₂ (reduced), Cl in SCl₂ goes from +1 to -1 in SOCl₂ (oxidized).

By tracking these changes in oxidation numbers, we can easily determine which substances are oxidized and which are reduced in these reactions. Remember, the oxidized substance loses electrons, and the reduced one gains electrons, according to the concept of redox reactions.

When oil and water are mixed vigorously, the oil is broken up into tiny droplets that are dispersed throughout the water. this dispersed mixture is a(n)?

Answers

Emulsion or heterogeneous mixture

According to Charles's law, under which conditions will the volume of a given amount of gas be proportional to temperature? when pressure and the number of moles increase when pressure and the number of moles decrease when pressure and the number of moles remain constant when the atmospheric pressure is 1.019 atm

Answers

Charles law states that volume is directly proportional to temperature,
when pressure and number of moles remain constant.
This is because both pressure and number of moles of gas affect the parameters temperature and volume. therefore if pressure and number of moles change then the relationship between volume and temperature changes as well
correct answer is 
when pressure and the number of moles remain constant

Answer:  when pressure and the number of moles remain constant

Explanation:

Charles' Law: This law states that volume is directly proportional to the temperature of the gas at constant pressure and number of moles.

[tex]V\propto T[/tex]     (At constant pressure and number of moles)

[tex]{V_1\times T_1}={V_2\times T_2}[/tex]

where,

[tex]V_1[/tex] = initial volume of gas

[tex]V_2[/tex] = final volume of gas

[tex]T_1[/tex] = initial temperature of gas

[tex]T_2[/tex] = final temperature of gas

Therefore, the volume of gas is proportional to temperature when pressure and number of moles are constant.

Water molecules are made of slightly positively charged hydrogen atoms and slightly negatively charged oxygen atoms. which force keeps water molecules stuck to one another?

Answers

In a chemical system, inter- and intra-molecular forces of interactions are operable. Intramolecular forces are the forces that hold atoms together within a molecule, while intermolecular forces are forces that exist between molecules. Thus, it is intermolecular forces of attraction which holds two or more molecules together.

intermolecular forces are of following types 
1) Dispersion
2) Dipole-Dipole interaction
3) Ion-Dipole Interaction and
4) Hydrogen bonding.

In case of water, it is Hydrogen bonding which is responsible for holding molecules together.

With reference to hydrogen bonding, it must be noted that it is an electrostatic attractive interaction between hydrogen atom that is bonded to 
electronegative atom (such as nitrogen, oxygen, or fluorine) and another atom, adjacent to it, which has lone pair of electrons.

In case of water, hydrogen atom of one water molecule interacts with lone pairs of electrons present on oxygen atom of other water molecule.

Water molecules are held together by an electromagnetic force known as hydrogen bonds. These bonds are a strong type of dipole-dipole interaction due to the partial positive charge of hydrogen atoms and partial negative charge of oxygen atoms. Option D is correct.

The electromagnetic force is responsible for keeping water molecules attracted to one another. More specifically, this attraction is due to hydrogen bonds, which are a strong type of intermolecular force. These bonds form because of the dipole interaction where the slightly positively charged hydrogen atoms of one water molecule are attracted to the slightly negatively charged oxygen atoms of another. Although individual hydrogen bonds are weaker than covalent and ionic bonds within molecules, they occur in large numbers in water, resulting in a significant force that holds the water molecules together.

Hydrogen bonds are particularly strong compared to other dipole-dipole interactions because of water's highly polar nature. This polarity is due to the oxygen atom in water being highly electronegative and possessing two lone pairs of electrons, resulting in a partial negative charge while the hydrogen atoms have a partial positive charge.

Hence, D. is the correct option.

The complete question is:

Water molecules are made of slightly positively charged hydrogen atoms and slightly negatively charged oxygen atoms. Which force keeps water molecules stuck to one another?

A.) Strong Nuclear

B.) Gravitational

C.) Weak Nuclear

D.) Electromagnetic

Which substance is insoluble and floats in water? A) Ice shavings B) Wood shavings C) Salt crystals D) Sugar crystals

Answers

Answer: B) Wood Shavings

Reason/Explanation:
Notice what options A, C, and D have on common. Ice, salt and sugar. Those are all dissolvable. Insoluble means un-able to dissolve. It can't dissolve. Wood shavings can't dissolve in water. They will just float. Sugar, salt and ice will all dissolve. Wood shavings won't.


-DustinBR
Hello, Reggie my name is Charlie.
This question is about physical science/or chemistry.
Incorrect answer is A/C/and D.
Correct answer is B.
Wood shavings is a substances it insoluble and it floats to the water, ocean, and lake.
Hope it helped you.
-Charlie

Gas stoichiometry: what volume of oxygen at 25 degrees celsius and 1.04 atm is needed for the complete combustion of 5.53 grams of propane?

Answers

Answer is: volume of oxygen is 14.7 liters.
Balanced chemical reaction: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O.
m(C₃H₈-propane) = 5.53 g.
n(C₃H₈) = m(C₃H₈) ÷ M(C₃H₈).
n(C₃H₈) = 5.53 g ÷ 44.1 g/mol.
n(C₃H₈) = 0.125 mol.
From chemical reaction: n(C₃H₈) : n(O₂) = 1 : 5.
n(O₂) = 0.625 mol.
T = 25° = 298.15K.
p = 1.04 atm.
R = 0.08206 L·atm/mol·K.
Ideal gas law: p·V = n·R·T.
V(O₂) = n·R·T / p.
V(O₂) = 0.625 mol · 0.08206 L·atm/mol·K · 298.15 K / 1.04 atm.
V(O₂) = 14.7 L.

Final answer:

To find the volume of oxygen needed to combust 5.53 grams of propane, calculate the moles of propane, use the stoichiometric relationship to find the moles of oxygen required, and then apply the ideal gas law to find the volume, resulting in 14.79 liters of oxygen needed.

Explanation:

Gas Stoichiometry of Propane Combustion

To determine the volume of oxygen at 25 degrees Celsius and 1.04 atm needed for the complete combustion of 5.53 grams of propane, we need to use stoichiometry and the ideal gas law. The balanced equation for the combustion of propane C3H8 is:

C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(l)

First, we convert the mass of propane into moles using its molar mass:

5.53 g C3H8 × (1 mol C3H8 / 44.11 g C3H8) = 0.1253 mol C3H8

According to the balanced equation, 1 mole of propane reacts with 5 moles of oxygen. Therefore, we need:

0.1253 mol C3H8 × (5 mol O2 / 1 mol C3H8) = 0.6265 mol O2

Now, we use the ideal gas law, PV=nRT, to find the volume of oxygen. First, adjust R to match the pressure in atm and volume in liters:
1.04 atm × V = 0.6265 mol × 0.0821 L×atm/mol×K × 298.15 K

Solving for V gives us the volume of oxygen needed:

V = (0.6265 mol × 0.0821 L×atm/mol×K × 298.15 K) / 1.04 atm = 14.79 L

Therefore, 14.79 liters of oxygen at 25 degrees Celsius and 1.04 atm are required for the complete combustion of 5.53 grams of propane.

What is the volume occupied by 51.0 g of ammonia gas (nh3) at stp?

Answers

  The  volume that is  occupied  by   51.0  grams  of  ammonia  gas(NH3) at  STP  is  calculated as follows

find the  moles  of NH3=  mass/molar mass

= 51.0 g/17 g/mol =  3 moles

At STP  1mole  =  22.4 liters,  what  about  3 moles  of NH3

= 3moles /1  mole x 22.4 L  =67.2  liters  will  occupied  by  51.0 g  of NH3

Answer :  The volume of ammonia gas at STP is, 67.2 liters

Explanation : Given,

Mass of ammonia = 51.0 g

Molar mass of ammonia = 17 g/mole

As we know that,

At STP, 1 mole of gas contains 22.4 L volume of gas.

First we have to calculate the moles of ammonia gas.

[tex]\text{Moles of }NH_3=\frac{\text{Mass of }NH_3}{\text{Molar mass of }NH_3}=\frac{51.0g}{17g/mole}=3mole[/tex]

Now we have to calculate the volume of ammonia gas at STP.

As, 1 mole of ammonia gas contains 22.4 L volume of ammonia gas

So, 3 moles of ammonia gas contains [tex]3\times 22.4L=67.2L[/tex] volume of ammonia gas

Therefore, the volume of ammonia gas at STP is, 67.2 liters

Why do we use a double arrow in the dissociation equation for a weak acid answer?

Answers

Answer is: because weak acids do not dissociate completely.

The strength of an Arrhenius acid determines percentage of ionization of acid and the number of H⁺ ions formed. 
Strong acids completely ionize in water and give large amount ofhydrogen ions (H⁺), so we use only one arrow, because reaction goes in one direction and there no molecules of acid in solution.

For example hydrochloric acid: HCl(aq) → H⁺(aq) + Cl⁻(aq).

Weak acid partially ionize in water and give only a few hydrogen ions (H⁺), in the solution there molecules of acid and ions.

For example cyanide acid: HCN(aq) ⇄ H⁺(aq) + CN⁻(aq).


Final answer:

A double arrow is used in the dissociation equation for a weak acid to denote that the reaction is an equilibrium, indicating a reversible process where the weak acid partially dissociates and exists in dynamic balance with its ions.

Explanation:

We use a double arrow in the dissociation equation for a weak acid to indicate that the reaction does not go to completion and remains at equilibrium. A weak acid partially donates its protons to the solution, leading to a dynamic equilibrium where the dissociation and re-association of the acid and its ions occur simultaneously. The double arrow (↔) represents the forward (acid losing a proton) and reverse (ion gaining a proton) reactions that happen at the same rate when the system is at equilibrium.

For example, the dissociation of acetic acid (CH₃COOH) in water is typically represented as:

CH₃COOH(aq) + H₂O(l) ↔ H₃O+ (aq) + CH₃COO­(aq)

The corresponding equilibrium constant (Ka) for this reaction reflects the acid's tendency to dissociate and is calculated by the formula Ka = [H₃O+][CH₃COO­] / [CH₃COOH]. A higher Ka value indicates a stronger acid, meaning it dissociates more. However, in weak acids, since they are not fully dissociated, their Ka values are relatively small.

Why are the very lowest mass stars unable to fuse helium in their cores?

Answers

Because they have used most of their energy

When a 2.5 mol of sugar (C12H22O11) are added to a certain amount of water the boiling point is raised by 1 Celsius degree. If 2.5 mol of aluminum nitrate is added to the same amount of water, by how much will the boiling point be changed? Use 3 – 4 sentences to explain your answer.

Please Help!
Will give most brainly

Answers

Answer is: boiling point will be changed by 4°C.

Chemical dissociation of aluminium nitrate in water: Al(NO₃)₃ → Al³⁺(aq) + 3NO⁻(aq).

Change in boiling point: ΔT =i · Kb · b.

Kb - molal boiling point elevation constant of water is 0.512°C/m, this the same for both solution.

b -  molality, moles of solute per kilogram of solvent., this is also same for both solution, because ther is same amount of substance.

i - Van't Hoff factor.

Van't Hoff factor for sugar solution is 1, because sugar do not dissociate on ions.

Van't Hoff factor for aluminium nitrate solution is approximately 4, because it dissociates on four ions (one aluminium cation and three nitrate anions). So ΔT is four times bigger.

The answer should be 4°C....

Sunspots appear dark because they are what ?

Answers

Sunspots have strong magnetic fields, thus being much cooler than their surroundings. Yet, they are still individually very hot and can reach up to a temp of 3,800 K. But since they are cooler than their surroundings, they appear to be much darker to the visible eye. 

Let me know if you need anything further. :)

                             - Dotz
Final answer:

Sunspots appear dark because they are cooler than the surrounding areas of the sun's surface. The cooler temperature causes less light to be emitted, making the sunspots look dark.

Explanation:

Sunspots appear dark because they are cooler than the surrounding areas of the sun's surface, also known as the photosphere. While they are still very hot, sunspots have temperatures of about 3,000 to 4,500 Kelvin, which is cooler than the average temperature of the photosphere, which is about 5,500 Kelvin. This difference in temperature causes less light to be emitted, and therefore the sunspots appear dark compared to the rest of the sun's surface

Learn more about Sunspots here:

https://brainly.com/question/34790269

#SPJ6

Jeremy throws his ball up in the air, but the ball falls back to the ground. What force made the ball move without ever touching the ball?

Answers

the answer to this problem is gravity because it makes everything come back down even us

Answer:

the naswer is gravity pulling on the ball

Explanation:

Anyone good with chemistry? number five and six please?!

Answers

ask a teacher for help
5: it is True
6: it is False

A person moves a book from a 30-cm high coffee table to the top shelf of a bookshelf approximately 2.5 m high. Which statement correctly describes the gravitational potential energy of the book? It has more gravitational potential energy on the table than on the shelf, It has more gravitational potential energy on the shelf than on the table,Its gravitational potential energy is constant regardless of its position?

Answers

Correct statement is "It has more gravitational potential energy on the shelf than on the table".

GPE = mgh

Where, GPE is the gravitational potential (J), m is the mass of the object (kg), g is acceleration due to gravity (9.8 m s⁻²) and h is the height to the object from ground (m).

Hence, GPE is directly proportional to h means, when h increases, GPE also increases.

What is the hydronium ion concentration in a solution of HCl that has a pH of 4.65? × 10n M n = What is the hydroxide ion concentration in a solution of NH3 with a pOH of 4.65? × 10n M n =

Answers

Answer:What is the hydronium ion concentration in a solution of HCl that has a pH of 4.65? Round to the nearest hundredth.
 
2.24 × 10n Mn =  -5

What is the hydroxide ion concentration in a solution of NH3 with a pOH of 4.65?  Round to the nearest hundredth.

2.24 × 10n Mn =  -5

Explanation:

If 29.0 l of methane, ch4, undergoes complete combustion at 0.961 atm and 140c, how many liters of each product would be present at the same temperature and pressure

Answers

combustion of methane is as follows;
CH₄ + 2O₂ --> CO₂  + 2H₂O
at constant temperature and pressure, volume of gas is directly proportional to number of moles of gas. This is Avagadro's law.
since its the same temperature and pressure , molar ratio is equivalent to volume ratio.
for instance molar ratio of CH₄ to CO₂ is 1:1
since number of moles is directly proportional to volume of gas, then volume ratio of CH₄ to CO₂ is 1:1
volume of methane is 29.0 L
therefore volume of CO₂ formed is 29.0 L

volume ratio of CH₄ to H₂O is 1:2
then volume of H₂O formed is 29.0 x 2 = 58.0 L 
therefore volume of H₂O formed is 58.0 L

Given the decomposition reaction: 2so3(g) → 2so2 (g) + o2 (g) according to le châtelier's principle, which side of the reaction will be favored when more oxygen is added to the reaction chamber?

Answers

A)The products will be favored.

Virtually all chemical reactions are accompanied by the liberation or uptake of heat. If we regard heat as a "reactant" or "product" in an endothermic or exothermic reaction respectively, we can use the Le Châtelier principle to predict the direction in which an increase or decrease in temperature will shift the equilibrium state. Thus for the oxidation of nitrogen, an endothermic process, we can write

[heat] + N2(g) + O2(g) → 2 NO(g)

Suppose this reaction is at equilibrium at some temperature T1 and we raise the temperature to T2. The Le Châtelier principle tells us that a net reaction will occur in the direction that will partially counteract this change. Since the reaction is endothermic, a shift of the equilibrium to the right will take place.

Answer:

C. the reactants will be favored.

Explanation:

Other Questions
Many species of roundworms are parasites of plants and animals. How is a roundworms body plan related to its function as a parasite? Read the excerpt from Hamlet. Gertrude: O Hamlet! speak no more; Thou turnst mine eyes into my very soul; And there I see such black and grained spots As will not leave their tinct. Hamlet: Nay, but to live In the rank sweat of an enseamed bed, Stewd in corruption, honeying and making love Over the nasty sty, Gertrude: O! speak to me no more; These words like daggers enter in mine ears; No more, sweet Hamlet! The excerpt supports the conclusion that Gertrude ignores what Hamlet says because she thinks hes crazy. cant bear listening to Hamlet because she knows hes right. has difficulty understanding Hamlet because hes yelling so loud. doesnt really pay attention to Hamlet because hes ranting. Will mark as Brainliest.Which of the following [H+] values describes the most acidic solution?10^- 1 M10^-7 M10^-12 M The coefficient of linear expansion of iron is 1.0 105 per C . The surface area of an iron cube, with an edge length of 5.0 cm, will increase by what amount if it is heated from 10 C to 60 C? The Lusiads is a Portuguese epic written by Luis De Camoes in the 16th century. It is a mythical account of the expansion of the Portuguese empire. The Portuguese have had a written language since the ninth century. Which poem does The Lusiads most resemble?The AeneidThe Odyssey What must occur after the president negotiates a treaty? In response to a set of ambiguous pictures, rita writes several stories in which the main characters desire to compete with some standard of excellence and surpass their own previous performances. psychologists in the tradition of henry murray, david mcclelland, and christiana morgan would be likely to characterize rita as rating high in Mayas bedroom is in the shape of a rectangular prism 15 feet long 12 feet wide and 10 feet high it has no windows Maya once to P allfour walls including the door in your ceiling where is the service area she will paint Which of the following bases can be ingested safely? aluminum hydroxide sodium hydroxide calcium hydroxide ammonia Diagnostic criteria for autism spectrum disorder do not includea. impairment in communication.b. restricted, repetitive, stereotyped behaviors.c. deficits in visual acuity.d. deficits in social relatedness. What statement best summarizes the relationship between photosynthesis and cellular respiration? Some penguins were playing on the ice. Ten of them dove in the water. A few seconds later, 6 of those penguins jumped back onto the ice. Now there are 12 penguins on the ice. How many penguins were on the ice to start? Use numbers, pictures,or words to show how you got the answer. A rectangularbroom has an area of 131 1/4 square feet. The length of the room is 12 1/2 feet. What is the width, in feet, of the room? Which terms describes a distributed data protection technology that leverages deep analysis, context evaluation, and rules configured from a central console to ensure confidential information remains secure while in use, in transit, and at rest? anti-forensics information technology infrastructure library (itil) digital forensic techniques data leakage prevention (dlp)? The larger square garden at Volterra Hall has sides twice as long as the smaller square garden. Together the gardens cover 18,000 square feet. Find the dimensions of each garden. Which excerpts from the passage provide strong evidence that Hrothgars hall is famous throughout the lands? Check all that apply. The style of handling conflict that involves a high degree of concern for both parties is Write the standard form of the number shown. three hundred eighty-nine billion, nine hundred thirty-six million, two hundred six thousand, seven hundred sixty-seven How would you solve the area _____ is a common nutrition-related sign or symptom of early pregnancy that occurs in many healthy pregnant women. question 19 options: fatigue hypertension gestational diabetes pernicious anemia