With the two spheres separated by 1 cm you measure the magnitude of the force between the spheres to be LaTeX: F_{12}F 12 . Now you remove the second sphere, and then bring a third identical sphere that is initially uncharged into brief contact with the first sphere before separating them by 1 cm. What is the approximate magnitude of the force between the first and third spheres?
Answer:[tex]0.25f_{12}[/tex]
Explanation:
Given
When Sphere 1 and 2 are present then force is [tex]f_{12}[/tex]
suppose q is the charge on both the sphere and [tex]d=1\ cm[/tex] is the distance between them then
[tex]f_{12}=\dfrac{kq^2}{d^2}[/tex]
Now sphere 2 is removed and sphere 1 is brought in contact with sphere 3
Charge will be automatically distributed among two spheres
i.e. both will acquire a charge of [tex]0.5 q[/tex]
Now force between them is
[tex]f'=\dfrac{k\times 0.5q\times 0.5q}{d^2}[/tex]
[tex]f'=0.25\times \dfrac{kq^2}{d^2}[/tex]
[tex]f'=\dfrac{f_{12}}{4}[/tex]
summarize the physical reasons that sound waves travel at different speeds through different mediums
The speed of sound varies in different media due to the rigidity (or compressibility in gases) and density of the medium. More rigid and less compressible media enable faster sound travel, while greater density can slow it down. Temperature also plays a role, with higher temperatures often leading to faster sound propagation.
Explanation:Understanding the Speed of Sound in Different MediumsSound waves travel at different speeds through different media because of the medium's rigidity and density. A medium's rigidity, or in the case of gases, compressibility, greatly influences the speed of sound. The more rigid or less compressible a medium is, the faster sound travels through it. Additionally, sound travels through a medium of lower density faster when the materials have similar rigidity, because the energy transfer between particles is more efficient.
Liquids and solids, for instance, are harder to compress and more rigid compared to gases, which accounts for the higher speed of sound in these media. However, the relationship is not straightforward with density, as an increased density can actually slow the propagation of sound, due to the increased mass particles have to move. Finally, temperature also affects the speed at which sound travels; hotter media makes particles more energetic and thus can increase the speed of sound.
It's important to understand these physical principles when considering applications such as medical imaging using ultrasonic waves or studying the properties of materials through acoustic analysis.
**URGENT, I WILL PAY 30 POINTS, PLEASE HELP**
Which wave has the shortest wavelength, assuming the axis for each wave is identical?
All three windows are the same size.
A has 10 complete waves visible through the window. B has 3, and C has 4.
So A must have the smallest wavelengths.
The answer is A.
The wavelength is the length to each curve. Each answer choice has the same length of a box so we can count the amount of curves in each option.
Option A has 10 visible curves.
Option B has 3 visible curves.
Option C has 4 visible curves.
Since option A has the most curves, that means that it has the shortest wavelengths.
Best of Luck!
What type of energy is the sum of an object’s potential and kinetic energy?
Answer: its mechanical energy
Explanation:
Answer:
Mechanical energy edg2021
Explanation:
The sum of an objects potential and kinetic energy is mechanical energy.
If a 2V battery is connected to the wire in one direction, the electrode that was the cathode becomes the anode and vice verse, but when the battery is connected the other way the cathode and anode do not switch. Explain why this is so, and what the voltages of the two situations are.
Answer:
1. This is so because of the charging and discharging phenomenon of the battery.
2. Voltage when fully charged: approximately 2.15 volts
Voltage when in use: drops below 2.15v
Explanation:
The anode is the electrode where electricity flows into. In contrast, the cathode is the electrode where the electricity flows out of. When a battery is connected to a load the electricity flows from the positive terminal to the negative terminal. In this case, the positive terminal is the cathode, and the negative terminal is the anode. Here the cathode and anode do not switch,
But when the battery is being charged, the electricity flows into the positive terminal instead of out of it. In this case, the roles are reversed, the electrode that was the cathode becomes the anode, and the anode becomes that cathode.
A fully charged 2volt battery has a voltage of approximately 2.15 volts. A fully discharged 2 volt battery has a voltage of 1.9 volts
The data indicate the populations of mammals in the Florida Everglades in different years over the past two decades. The Burmese python, a non-native species, was introduced to Florida as an exotic pet. After Hurricane Andrew hit Florida in 1992, many pet owners lost track of their non-native snakes. The biodiversity of the Everglades has decreased since then. According to the data, what hypothesis is best supported with regard to Burmese pythons and Florida Everglade biodiversity? A) Burmese pythons are omnivorous and have decreased all populations of mammals. B) Burmese pythons compete with the white-tailed deer most directly for food sources. C) Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades. D) Burmese pythons carry diseases and parasites that directly impact the mammal populations of the Everglades.
Answer:
C) Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades.
Explanation:
Due to it being an invasive specie (naturally found in South Asia), and also one of the five largest species of snakes in the world, the Burmese pythons lack natural predators in this new territories.
The Burmese viper is also an opportunistic hunter and would eat anything it can overpower, it easily made a wide range of food varieties in these swamps.
The best-supported hypothesis regarding the impact of Burmese pythons on the biodiversity of the Florida Everglades is option C: Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades.
Burmese pythons have become a notorious invasive species in Florida Everglades, with their introduction traced back to events such as Hurricane Andrew. This species has a significant negative impact on local ecosystems primarily due to its wide-ranging diet and absence of natural predators, which allows for unchecked population growth. The data indicating a decrease in Everglades' mammal populations correlates with the introduction and proliferation of pythons, who can consume a broad array of species. Similar scenarios observed in other ecosystems, like the brown tree snake in Guam and the Nile perch in Lake Victoria, support the idea that invasive predators can cause extinctions and greatly disrupt native biodiversity. The Burmese python's adapting capabilities and generalist diet make it a formidable invader that furthers the decline of various mammal populations, sustains its population expansion, and consequently diminishes Everglades biodiversity.
Which kind of weather usually forms over the northwest united states in the summer because of maritime polar air masses?
Answer:
Cloudy and damp weather
Explanation:
Maritime Polar can form anytime of the year and because they are not as cold as continental polar which brings hot and humid air
The cool and moist Maritime Polar air masses brings cloudy and damp weather to the USA.
Maritime polar air masses form over the northern Atlantic and the northern Pacific oceans. They most often influence the Pacific Northwest and the Northeast.
Answer:
Fog
Explanation:
Una muestra de 500g de agua se calienta desde 10°C hasta 80°C. Calcula la cantidad de calor absorbido por líquido si su calor específico es 4186J/kg ×K
Answer:
Q = 142.324kJ
Explanation:
Data:
M = 500g = 0.5kg
T1 = 10°C = (10 + 273.15)K = 285.15K
T2 = 80°C = (80 + 273.15)K = 353.15K
Q = ?
C = 4186J/kg.K
Q = mc(T2 - T1)
Q = 0.5 * 4186 * (353.15 - 285.15)
Q = 0.5 * 4186 * 68
Q = 142324J
Q = 142.324kJ.
The heat absorbed by a 500g sample of water when heated from 10°C to 80°C is calculated using the heat transfer formula q=mcΔT. Here m is mass ie, 0.5kg, c is specific heat capacity i.e., 4186 J/kg*°C, and ΔT is change in temperature i.e., 70°C. After substituting these values in the formula, we find that the heat absorbed, q, is approximately 146300 J.
Explanation:The question refers to the equation q = mcΔT for calculating heat transfer, where 'q' represents the heat absorbed, 'm' denotes mass, 'c' represents specific heat capacity, and 'ΔT' denotes the change in temperature. In this case, by inserting the values into equation, we have q = (0.5 kg) * (4186 J/kg*°C) * (80°C - 10°C). After resolving this, we find q equals approximately to 146300 J, which is the amount of heat absorbed by the water.
Learn more about Heat Transfer here:https://brainly.com/question/31065010
#SPJ3
Water occupies two main fluid compartments within the body, the intracellular fluid compartment and the extracellular fluid compartment. Which of the following statements is true concerning the volume of intracellular fluidA. The ICF fluid compartment changes, so there is no way to determine the amount of water at a given timeB. Approx. One third of the water is in the ICF compartmentC. Approx. Two thirds of the water is in the ICF compartmentD. All of the water is in the ICF compartment
Answer:
C. Approx. Two thirds of the water is in the ICF compartment
Explanation:
The body cells are bathed in fluids internally and externally. The water inside the cells make up about 42% of the total body weight and is called the intracellular fluid (ICF). The rest of the fluid outside the cells is called extracellular fluid (ECF) and is separated from the intracellular fluid by a semipermeable membrane that surrounds the cell, and only allows fluid to flow in and out of the cells, but prevents unwanted molecules or materials from getting in.
David wants to experiment with the device, so he connects an ammeter into the circuit and measures 11.5 AA when the device is connected to the car's battery. From this, he calculates the time to boil a cup of water using the device. If the energy required is 100 kJkJ , how long does it take to boil a cup of water?
Answer:
2.42hours
Explanation:
To calculate the time taken to boil the cup of water, we will use the formula
Q = It where
Q is the total energy required to boil the water = 100KJ = 100,000Joules
I is the current = 11.5A
t is the time taken to boil the water
t = Q/I
t = 100,000/11.5
t = 8695.65seconds
t = 2.42hours
To calculate the time to boil water using a car battery, multiply the current by the typical car battery voltage to find the power and then use the energy required divided by the power to find the time. In this case, it takes approximately 12 minutes and 4 seconds to boil the water.
To determine how long it takes to boil a cup of water using an electrical device, we need to calculate the time based on the power and energy required. The energy required to boil the water is given as 100 kJ. David measured a current of 11.5 A with an ammeter when the device is connected to the car's battery. To find the time, we need the voltage of the car's battery, which is typically 12 V for most cars. The power (P) can be calculated using the formula P = I imes V where I is the current and V is the voltage. Therefore, the power is P = 11.5 A imes 12 V = 138 W (watts). Next, we convert the energy required to watt-seconds by multiplying 100 kJ by 1,000 to get 100,000 J. Then, we calculate the time (t) using the formula t = Energy / Power. So, t = 100,000 J / 138 W \<- approximately 724.64 s, or roughly 12 minutes and 4 seconds.
____is the only item that exists on earth at standard pressures as a solid, liquid, and gas.
Answer:
Plasma
Explanation:
Answer:
I think the answer is water.
Explanation:
It becomes a solid when frozen, when it's at it's true form it's a liquid, and when it evaporates it becomes water vapor (which is basically gas).
When water is boiled at a pressure of 2.00 atm, the heat of vaporization is 2.20×106J/kg2.20×10
6
J/kg and the boiling point is 120∘C120
∘
C. At this pressure, 1.00 kg of water has a volume of 1.00×10−3m31.00×10
−3
m
3
, and 1.00 kg of steam has a volume of 0.824m30.824m
3
. (a) Compute the work done when 1.00 kg of steam is formed at this temperature. (b) Compute the increase in internal energy of the water.
Answer:
Explanation:
a ) When 1 kg water is boiled at constant pressure of 1 atm , its volume increases by following volume
(.824 - .001 )m³
.823 m³
work done by steam = increase in volume x pressure
.823 x 10⁵ J
Heat added
= latent heat of vaporization x mass
= 2260000 J x 1
= 22.6 x 10⁵ J
Increase in internal energy of gas
= heat added - work done by gas
= (22.6 - .823) x 10⁵ J
= 21.777 x 10⁵ J .
A uniform 1.6-kg rod that is 0.89 m long is suspended at rest from the ceiling by two springs, one at each end. Both springs hang straight down from the ceiling. The springs have identical lengths when they are unstretched. Their spring constants are 31 N/m and 63 N/m. Find the angle that the rod makes with the horizontal.
Answer:
8.27°
Explanation:
To angle difference will be determined by the difference in the displacement of the springs, produced by the weight of the center of mass of the rod.
[tex]d=y_1-y_2=\frac{F_1}{k_1}-\frac{F_2}{k_2}=\frac{0.5mg}{31N/m}-\frac{0.5mg}{63N/m}\\\\d=0.5(1.6kg)(9.8m/s^2)[\frac{1}{31N/m}-\frac{1}{63N/m}]=0.128m[/tex]
by a simple trigonometric relation you obtain that the angle:
[tex]sin\theta=\frac{d}{l}=\frac{0.128m}{0.89m}=0.144\\\\\theta=sin^{-1}(0.144)=8.27\°[/tex]
hence, the angle between the rod and the horizontal is 8.27°
Two 1.50-V batteries—with their positive terminals in the same direction—are inserted in series into the barrel of a flashlight. One battery has an internal resistance of 0.390 Ω, the other an internal resistance of 0.120 Ω. When the switch is closed, a current of 600 mA occurs in the lamp.What fraction of the power dissipated is dissipated in the batteries?
Answer:
im sorry i dont wanna give you a wrong answer if you want one tho ill give it to you
Explanation:
You put mass m1 of ice cooled to -20C into mass m2 of water at 2C. Both are in a thermally insulated chamber. In the final state of the system: A. Everything turns to ice at a temperature below 0C. B. Everything melts and is at a temperature above 0C. C. There is a mixture of water and ice as the final state. D. The water and ice never reach the same temperature. E. There is not enough information to find the final temperature.
Answer:
E. There is not enough information to find the final temperature.
Explanation:
We do not the actual masses of ice and water involved in the question, so we cannot determine if the water freezes or the ice melts. So, there is not enough information to find the final temperature.
The volume V of a fixed amount of a gas varies directly as the temperature T and inversely as the pressure P . Suppose that V= 42 cm^3 . when T = 84 kelvin and P = kg/cm^2 . Find the volume when T=185 kelvin and P = 10 kg/cm^2
Complete question:
The volume V of a fixed amount of a gas varies directly as the temperature T and inversely as the pressure P . Suppose that V= 42 cm^3 . when T = 84 kelvin and P = 8 kg/cm^2 . Find the volume when T=185 kelvin and P = 10 kg/cm^2
Answer:
The final volume of the gas is 74 cm³
Explanation:
Given;
initial volume of the gas, V₁ = 42 cm³
initial temperature of the gas, T₁ = 84 kelvin
initial pressure of the gas, P₁ = 8 kg/cm²
final volume of the gas, V₂ = ?
final temperature of the gas, T₂ = 185 kelvin
final pressure of the gas, P₂ = 10 kg/cm²
From the statement given in the question, we formulate mathematical relationship between Volume, V, Temperature, T, and Pressure, P.
V ∝ T ∝ ¹/p
[tex]V =k \frac{T}{P}[/tex]
where;
k is constant of proportionality
make k subject of the formula
[tex]k = \frac{VP}{T} \\\\Thus, \frac{V_1P_1}{T_1} = \frac{V_2P_2}{T_2} \\\\V_2= \frac{V_1P_1T_2}{P_2T_1} \\\\V_2= \frac{42*8*185}{10*84} \\\\V_2 =74 \ cm^3[/tex]
Therefore, the final volume of the gas is 74 cm³
Answer:
V = 74 cm^3
Explanation:
Solution:-
- The volume V of a fixed amount of a gas varies directly as the temperature T and inversely as the pressure P. Expressing the Volume (V) in terms of Temperature (T) and (P):
V ∝ T , V ∝ 1 / P
- Combine the two relations and equate the proportional relation with a proportionality constant:
V = k * (T / P)
Where, k: The proportionality constant:
- Using the given conditions and plug in the given relation of volume V:
Suppose that V= 42 cm^3 . when T = 84 kelvin , P = 8 kg/cm^2
k = V*P / T
k = 42*8 / 84
k = 4 kg cm / K
- Use the proportionality constant and evaluate Volume V for the following set of conditions:
T=185 kelvin and P = 10 kg/cm^2
V = 4*( 185 / 10 )
V = 74 cm^3
As matter changes state from gas to liquid, which of these statements is true?
Answer:
it is condensing , intermolecular forced are getting stronger
Explanation:
condensation is gas to liquid and intermolecular forces are attaction and liquid molecules are colser together so they have more intermolecular forces hope this helps god bless
The International Space Station is orbiting at an altitude of about 370 km above the earth's surface. The mass of the earth is 5.976 × 1024 kg and the radius of the earth is 6.378 × 106 m. Assuming a circular orbit, what is the period of the International Space Station's orbit?
Answer:
T = 5516.63 seconds
Explanation:
Given that,
The International Space Station is orbiting at an altitude of about 370 km above the earth's surface.
Mass of the Earth, [tex]M=5.976 \times 10^{24}\ kg[/tex]
Radius of Earth, [tex]r=6.378\times 10^6\ m[/tex]
We need to find the period of the International Space Station's orbit. It is a case of Kepler's third law. Its mathematical form is given by :
[tex]T^2=\dfrac{4\pi^2}{GM}\times R^3[/tex]
R = r + h
[tex]T^2=\dfrac{4\pi^2}{6.67\times 10^{-11}\times 5.976 \times 10^{24}}\times (370000+6.378\times 10^6)^3\\\\T^2=30433264.1641\ s\\\\T=5516.63\ s[/tex]
So, the period of the International Space Station's orbit is 5516.63 seconds.
You place a 10 kg block on a ramp with an angle of 20 degrees. You push the block up the ramp giving it an initial velocity of 15 m/s. If the coefficient of friction between the block and the ramp is 0.4, find the total distance the block travels before it turns around and slides back down the ramp.
Answer:
L = 15.97 m
Explanation:
Given:-
- The mass of the block, m = 10 kg
- The inclination of ramp, θ = 20°
- The initial speed, Vi = 15 m/s
- The coefficient of friction u = 0.4
Find:-
find the total distance the block travels before it turns around and slides back down the ramp.
Solution:-
- The total distance travelled by the block up the ramp is defined when all the kinetic energy is converted into potential energy and work is done against the friction. Final velocity V2 = 0.
- Develop a free body diagram of the block. Resolve the weight "W" of the block normal to the surface of ramp. Then apply equilibrium condition for the block in the direction normal to the surface:
N - W*cos( θ ) = 0
Where, N : The contact force between block and ramp.
N = m*g*cos ( θ )
- The friction force (Ff) is defined as:
Ff = u*N
Ff = u*m*g*cos ( θ )
- Apply the work-energy principle for the block which travels a distance of "L" up the ramp:
K.E i = P.E f + Work done against friction
Where, K.E i = 0.5*m*Vi^2
P.E f = m*g*L*sin( θ )
Work done = Ff*L
- Evaluate "L":
0.5*m*Vi^2 = m*g*L*sin( θ ) + u*m*g*cos ( θ )*L
0.5*Vi^2 = g*L*sin( θ ) + u*g*cos ( θ )*L
0.5*Vi^2 = L [ g*sin( θ ) + u*g*cos ( θ ) ]
L = 0.5*Vi^2 / [ g*sin( θ ) + u*g*cos ( θ ) ]
L = 0.5*15^2 / [ 9.81*sin( 20 ) + 0.4*9.81*cos ( 20 ) ]
L = 15.97 m
Explain how wind and water can contribute to
weathering, and are also agents of erosion and
deposition.
Final answer:
Wind causes erosion by deflating fine-grained particles, leading to landforms like desert pavements. It deposits sediments forming dunes. To prevent wind erosion, planting vegetation, creating windbreaks, and careful land management are effective.
Explanation:
How Wind Causes Erosion
Erosion is the process by which natural forces move sediments and other soil components from one place to another. Wind causes erosion primarily through a process known as deflation, which is the removal of loose, fine-grained particles by the turbulent action of the wind. Over time, these actions can result in landforms such as desert pavements, where only larger rocks remain because the smaller particles have been blown away.
Sediments Deposited by Wind
Sediments like sand and dust can be carried over great distances by wind before being deposited. These sediments can form various wind-deposited landforms, such as dunes. Dunes are hills of loose sand built by aeolian processes and are one of the most recognizable landforms deposited by wind.
Preventing Wind Erosion
To prevent wind erosion, practices such as planting vegetation cover, creating windbreaks, and managing land use to avoid overexposure of the soil are effective. Vegetative cover helps to bind the soil together and windbreaks, such as trees and shrubs, reduce the wind speed at ground level, preventing the soil from being picked up.
How much would a 77.7 kg person weigh (a) on Earth's Moon, where the acceleration of gravity is 1.63 m/s2, and (b) on Mars, where the acceleration of gravity is 3.77 m/s2?
Answer:
The answer to your question is below
Explanation:
Data
mass of the person = 77.7 kg
gravity on the moon = 1.63 m/s²
gravity on mars = 3.77 m/s²
Process
To find the weight of a person, use Newton's second law.
Formula
Force = mass x acceleration but Weight = mass x gravity
a)
Weight = 77.7 x 1.63
Weight = 126.65 N
b)
Weight = 77.7 x 3.77
Weight = 292.93 N
Molecular clouds range in mass from a few times the mass of our Sun (solar masses) to 10 million solar masses. Individual stars range from 0.08 to about 150 solar masses. What does all of this imply about how stars form from molecular clouds
Answer:
Explained in Depth.
Explanation:
It is all matter of what kind of stars are we talking about, for simplicity let's say we are talking about normal stars such as our sun.
If there is a molecular cloud that has a mass that is slightly larger than our sun then it is possible that the gravity will eventually pull together cloud into a sphere that would have enough mass to start nuclear fusion which is important to become a star.
Mass of such cloud would be 1.98x10^30Kg almost equal to the sun's mass.
All of this implies that stars are formed when there is enough mass to let gravity pull it all together into a sphere that has enough gravitational pull to start nuclear fusion inside the core.
Molecular clouds, with masses ranging from a few times the mass of the Sun to 10 million solar masses, form stars when their dense cores collapse due to gravity overcoming internal pressure. This process involves clumps and cores within the clouds, eventually leading to the birth of a star as gravity causes the core to contract and increase in density significantly.
Molecular clouds range in mass from a few times the mass of our Sun (solar masses) to 10 million solar masses, while individual stars vary from 0.08 to about 150 solar masses. This significant range in mass implies a crucial relationship in star formation.
Molecular clouds, also known as stellar nurseries, contain complex structures including clumps and cores. Clumps within these clouds have masses between 50 and 500 solar masses, and are subdivided into even denser regions called cores, which can serve as the embryos of stars due to their high density and low temperature. As gravity pulls the material in these cores inward, the material collapses under its own weight, eventually forming a star.
The ongoing battle between gravity and pressure defines the star formation process. When gas atoms in the cores are dense and cold enough, gravity overcomes internal pressure, leading to collapse and the birth of a star. This collapse reduces the radius and increases the density of the core by a factor of nearly [tex]10^{20}[/tex], resulting in the formation of a dense, hot ball of matter where nuclear reactions can begin, giving rise to a new star.
There is a Limited amount of energy available on earth. Why is it important that people conserve energy?
Answer:
If humans conserve energy then we will have energy for alonger amount of time.
Explanation:
A battery connected across two parallel metal plates. There is a uniform E-field between the plates, and a positive charge experiences a drop in potential upon traveling from the left plate to the right plate. If the separation of the plates is 0.002 m, determine the magnitude of the electric field in the air gap
Answer:
The magnitude of the electric field in the air gap [tex]E = 0.00036 C[/tex]
Explanation:
The Electric field E between the plates, [tex]E = \frac{q}{4\pi \epsilon_{0} r^{2} }[/tex]
Where q = the positive charge
r = separation of the plates= 0.002 m
[tex]\frac{1}{4\pi \epsilon_{0} } = 9 * 10^{9} Nm^{2} /C^{2}[/tex]
[tex]E = \frac{9 * 10^{9} q}{0.002^{2} } \\E = \frac{9 * 10^{9} q}{4 * 10^{-6} } \\E = 2.25* 10^{15} q[/tex]
The elementary positive charge, q = 1.602176634×10−19 C
[tex]E = 2.25 * 10^{15} * 1.602176634×10^{-19} \\E = 0.00036 C[/tex]
A Young's interference experiment is performed with blue-green laser light. The separation between the slits is 0.500 mm, and the screen is located 3.14 m from the slits. The first bright fringe is located 3.24 mm from the center of the interference pattern. What is the wavelength of the laser light?
Answer:
Wavelength of laser light will be [tex]5.15\times 10^{-7}m[/tex]
Explanation:
We have given distance between the slits d = 0.5 mm = [tex]0.5\times 10^{-3}m[/tex]
Distance between screen and slits D = 3.14 m
Distance of bright fringe from center [tex]y=3.24mm=3.24\times 10^{-3}m[/tex]
It is known that [tex]sin\Theta =\frac{y}{D}=\frac{3.24\times 10^{-3}}{3.14}=1.031\times 10^{-3}m[/tex]
It is also know that [tex]m\lambda =dsin\Theta[/tex], here m = 1 for first bight fringe.
[tex]1\times \lambda =0.5\times 10^{-3}\times 1.031\times 10^{-3}[/tex]
[tex]\lambda =5.15\times 10^{-7}m[/tex]
So wavelength of laser light will be [tex]5.15\times 10^{-7}m[/tex]
Diffuse reflection occurs when the size of surface irregularities is
Diffuse reflection occurs when the irregularities of a surface are comparable to or larger than the wavelength of the incident light, causing light to scatter in multiple directions.
Diffuse reflection occurs when light reflects off a surface that has irregularities comparable to or larger than the wavelength of the incident light. The surface's unevenness causes the incoming light rays to reflect in multiple directions, giving a non-glossy or matte appearance to the surface. This should be contrasted with specular reflection, where a smooth surface reflects light in a singular, coherent direction, maintaining the angle of incidence equal to the angle of reflection.
A familiar example of diffuse reflection is the way sunlight illuminates a room; the light is scattered by the walls and objects, which have microscopically rough surfaces. In contrast, a mirror provides a clear image due to specular reflection because its surface irregularities are much smaller than the wavelength of visible light. This principle of diffuse versus specular reflection is fundamental in understanding how different materials and surfaces affect the quality of reflected light.
variable.
Use the drop-down menus to complete each sentence.
To run the physics cart, the fan speed of the cart is manipulated. This is the
The cart accelerates due to the speed of the fan. Acceleration is therefore thinder
A"constant" is a parameter that stays the same regardless of the variables.
dependent
constant
constant is the
of the cart that is held
) Intro
Done
Answer:
Independent
Dependent
Mass
Explanation:
A holiday ornament in the shape of a hollow sphere with mass 0.015 kg and radius 0.055 m is hung from a tree limb by a small loop of wire attached to the surface of the sphere. If the ornament is displaced a small distance and released, it swings back and forth as a physical pendulum.
Calculate its period. (You can ignore friction at the pivot. The moment of inertia of the sphere about the pivot at the tree limb is 5MR²/3.)
Take the free-fall acceleration to be 9.80 m/s². Express your answer using two significant figures.
Answer: 0.61 s
Explanation:
Given
Mass of object, m = 0.015 kg
Radius of object, r = 0.055 m
Acceleration of object, g = 9.8 m/s²
In a pendulum,
T = 2π * √[I /(mgd)]
The moment of Inertia, I of a hollow sphere is given by
I(sphere) = 2/3MR² + MR²
I(sphere) = 5/3MR²
Also, d = R
Substituting these into the first equation, we have
T = 2π * √[(5/3MR²) / (mgr)]
T = 2π * √[(5/3r) / (g)]
T = 2 * 3.142 * √(5/3 * 0.055) / (9.8)]
T = 6.284 * √(0.092/9.8)
T = 6.284 * √0.00939
T = 6.284 * 0.097
T = 0.6095 s
To 2 significant figures,
The period is 0.61 s
A ray of light, traveling through air, is incident on a smooth transparent liquid surface at an angle of 13 degrees with respect to the normal of the surface. What is the refraction angle of the light in the liquid if the index of refraction of the liquid is 1.54? Return the angle in degrees and rounded to 2 decimal places.
Answer:
The refraction angle of the light in the liquid is 8.40 degrees.
Explanation:
Given:
A ray of light passing through air to liquid.
Air is medium 1 and liquid is medium 2.
Angle of incidence [tex](\theta_1)[/tex] = 13°
Refractive index, [tex](n_2)[/tex] = 1.54
We have to find the angle of refraction:
Let the angle of refraction be "[tex]\theta_2[/tex]" .
Formula to be used:
⇒ [tex]n_1\times sin(\theta_1) =n_2\times sin(\theta_2)[/tex]
Note:
Index of refraction of air [tex](n_1)[/tex] = 1
Accordingly:
Using Snell's law and plugging the values.
⇒ [tex]n_1\times sin(\theta_1) =n_2\times sin(\theta_2)[/tex]
⇒ [tex]1\times sin(13) =1.54\times sin(\theta_2)[/tex]
⇒ [tex]\frac{1\times sin(13)}{1.54} = sin(\theta_2)[/tex]
⇒ [tex]\frac{1\times 0.2249}{1.54} = sin(\theta_2)[/tex] ...sin(13) =0.2249
⇒ [tex]\theta_2=sin^-^1(\frac{0.2249}{1.54})[/tex]
⇒ [tex]\theta_2=sin^-^1(0.145)[/tex]
⇒ [tex]\theta_2=8.3974[/tex] degrees.
⇒ [tex]\theta_2 = 8.40[/tex] degrees ...Rounded to 2 decimal place.
The refraction angle of the light in the liquid is 8.40 degrees.
Flasher units are being discussed. Technician A says that only a DOT-approved flasher unit should be used for turn signals. Technician B says that a parallel (variable-load) flasher will function for turn signal usage, although it will not warn the driver if a bulb burns out. Who is right?
a. Technician A onlyb. Technician B onlyc. Both Technicians A and Bd. Neither Technician A nor B
Answer: C
Both Technicians A and B
Explanation:
Only a DOT-approved flasher unit should be used for turn signals. And a parallel (variable-load) flasher will function for turn signal usage, although it will not warn the driver if a bulb burns out.