The asteroid belt, although home to a significant portion of known asteroids, isn't as crowded as it may initially appear due to the large volume of the belt. Spacecraft have successfully navigated through this space without collision due to the substantial distance, in the realm of millions of kilometers, between asteroids.
Explanation:The asteroid belt, primarily located between Mars and Jupiter, appears crowded due to the large quantity of asteroids, over 75% of the known total. But, in reality, the volume of the belt is massive, and these asteroids are not located close to each other. Typically, the distance between objects, even those as small as 1 kilometer in size, is several million kilometers.
As for spacecraft traversing the asteroid belt, although it may seem perilous, it's actually not typically an issue. Spacecraft like Galileo, Cassini, Rosetta, and New Horizons have successfully traveled through the asteroid belt without any collisions. Pioneer missions by NASA have also navigated through the belt without any significant incident, proving that it's achievable.
In reality, despite the large number of celestial objects in the asteroid belt, there is far more empty space than asteroids. This vast space between asteroids has facilitated space missions effectively without much risk of collision.
Learn more about Asteroid Belt and Spacecraft Travel here:https://brainly.com/question/10049508
#SPJ3
What endocrine disorder can be prevented by regular exercise?
Answer:
type 2 diabetes
Explanation:
edge unit test review
The headlights of a typical truck are powered by a 12 V battery. What current do they draw if the resistance is 4.8 ohms?
The headlights of a typical truck are powered by a 12 V battery, then the current they draw if the resistance is 4.8 ohms would be 2.5 Ampere.
What is resistance?Resistance is the obstruction of electrons in an electrically conducting material.
V=IR
As given in the problem, the headlights of a typical truck are powered by a 12 V battery, the find out the current drawn if the resistance is 4.8 ohms.
By using Ohm's Law,
The voltage of the battery = 12 volt
The resistance of the resistor = 4.8 Ohm
V = I × R
12 = I × 4.8
I = 12 / 4.8
I = 2.5 Ampere
Thus, If the headlights of a typical truck are powered by a 12 V battery, then the current they draw if the resistance is 4.8 ohms would be 2.5 Ampere.
To learn more about resistance here, refer to the link given below ;
brainly.com/question/14547003
#SPJ2
A forklift lifts 5 boxes from the ground to a height of 2 meters (m). The boxes push down with a force of 1000 newtons (N). How much work was done by the forklift to lift the boxes?
Which one of the following is the equation for the first law of thermodynamics?
A. PV = nRT
B. PV/T
C. ΔU = Q – W
D. W = PΔV
Answer:
c
Explanation:
The force exerted by the weight of the air above is called what?
Your friend comments that the bright star must give off much more light than the dimmer star. Is he necessarily right?
When two or more waves are at the same place at the same time, the resulting effect is called?
When two or more waves are present at the same place at the same time, then the resulting effect is called as superposition.
What is Superposition?The principle of Superposition of waves states that the resultant displacement of a group of different waves in a medium at a given point of time at the same place is equal to the vector sum of the individual displacements which are produced through each of the wave at that specific point in the medium. There are two types of superposition of inference of waves and these are the constructive interference and the destructive interference.
Most of the waves generally appears complex in a medium because of the result from the two or more waves which combine as they come together at the same place at the same point of time in the medium.
An example of superposition of waves is the silt back-fill of any underground drain which would form some time after the ground is present immediately above it.
Learn more about Superposition here:
https://brainly.com/question/12493909
#SPJ6
is it possibke to start with 25g of reactants and end with 35g of products?why or why not?
Which word best completes the sentence?
A person with a blood alcohol content between 0.16-0.30% is severely impaired and has an increased risk of____from choking on vomit
Asphyxiation
Depression
Aggression
Coordination
A motorboat approaches you head-on and sounds two shorts blasts. you would prefer to pass the boat on your port (left) side. which sound signal should you use to indicate your disagreement? eleven prolonged blasts
Explanation:
Sound signals used in waterways are a mode of communication with the other boaters to avoid any confusion and avoid collisions.
In order to show that we disagree with the other boater decision, the sound signal to blow is five or more short blast. This will give an impression to the other boater that I have not agreed with his decision.
The sound signal that I will give the other boater to inform him that I wish him to pass his boat on my left side is one short blast. This will tell him to pass on my left side.
The sound signal you should use to indicate you disagree with other boaters intentions is five or more short blasts
Five or more short blast shows a danger signal. They are signals used to indicate disagreement. They are one of the types of sound signals that show you are not in agreement with other boater’s intention.
Further ExplanationSound signals are also known as blasts. There are 2 common sound signals, short blast and prolonged blast. They are used when two vessels are heading towards each other.
Although these types of sound signals cannot be used in conditions that affect visibility such as fog.
However, there are different sound signals combinations and it is very important for all boaters to understand what each of the sound signals means.
The short blast is just 1 seconds while the prolonged blast lasts for duration of 4-6 seconds.
Sound signals can actually mean a change in direction to other boaters, it has different meanings.
One short blast indicate that you are informing other boaters you want to pass them from your port side (left-hand side), prolonged blasts means you are informing other boaters you want to pass them from starboard side (right-hand side) and three shorts blast means you are informing other boaters you are operating astern propulsion
LEARN MORE:
sound signal https://brainly.com/question/3743003KEYWORDS:
prolonged blastsound signalsshort blastboatersvesselsThe period of a simple pendulum is 3.8 s. the length of the pendulum is doubled. what is the period t of the longer pendulum? t = s
The time period of a simple pendulum is defined as the time taken by the pendulum to finish one full oscillation .
Time period (T) of a simple pendulum = 2π[tex]\sqrt{l/g}[/tex]
given :
Time period (T1) = 3.8 second
L1 = ?
Time period (T1) = 2π[tex]\sqrt{L1/g}[/tex]
3.8 sec = 2 * 3.14 [tex]\sqrt{L1/9.8}[/tex]
squaring both the sides
14.44 = 39.44 * ( L1 / 9.8 )
L1 = 35.16 m
since , the length of the pendulum is doubled
L2 = L1*2 = 35.16 * 2 = 70.32 m
Let the period t of the longer pendulum will be = T2
Time period (T2) = 2π[tex]\sqrt{L2/g}[/tex]
= 2 * 3.14 [tex]\sqrt{70.32/9.8}[/tex]
= 16.83 seconds
The time period t of the longer pendulum will be 16.83 seconds
learn more about time period of simple pendulum
https://brainly.com/question/27914648?referrer=searchResults
#SPJ3
Final answer:
Doubling the length of a simple pendulum increases its period according to the square root of 2, resulting in a new period of approximately 5.37 seconds from the original 3.8 seconds.
Explanation:
The question asks about the effect of doubling the length of a simple pendulum on its period. To approach this, we rely on the formula for the period of a simple pendulum: T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. Doubling the length of the pendulum means that we replace L with 2L in the formula, which affects the period.
To find the new period after doubling the length, we calculate T'= 2π√(2L/g). This can be simplified to T' = T√2, given that T is the original period. Since the original period is given as 3.8 seconds, we calculate the new period as 3.8√2, which approximates to 5.37 seconds.
Which statement is true? A) All waves travel at the same speed through any medium. B) All waves travel at the same speed if no medium is present. C) Electromagnetic waves require a medium, but mechanical waves do not. D) Mechanical waves require a medium, but electromagnetic waves do not. Eliminate
Which of these is MOST LIKELY to cause natural pollution?
Answer:
volcano
Explanation:
the ash and stuff pollutes the air
A natural-gas pipeline with a diameter of 0.250 m delivers 1.55 m^3 of gas per second. What is the flow speed of the gas
The gas flow speed in a pipeline with a diameter of 0.250 m delivering 1.55 m³ of gas per second is approximately 31.56 m/s.
Explanation:The question asks for the flow speed of the gas in a natural-gas pipeline with a specific diameter, which can be calculated through the continuity equation used in fluid dynamics. This equation states that the volume flow rate (Q) is equal to the velocity of the flow (v) times the cross-sectional area of the pipe (A). Therefore, we can rearrange the equation to find the velocity as V = Q/A.
The cross-sectional area A of the pipeline can be calculated using the formula for the area of a circle since the pipe is essentially a circular cylinder: A = πr², where r is the radius of the pipeline. Given the pipeline diameter of 0.250 m, the radius is half this value or 0.125 m. Substituting this into the area formula gives A = π*(0.125 m)² = 0.0491 m².
Finally, we can find the flow speed by dividing the given volume flow rate (1.55 m³/s) by the calculated cross-sectional area: V = Q/A = 1.55 m³/s/0.0491 m² = 31.56 m/s. So, the gas flow speed in the pipeline is approximately 31.56 meters per second.
Learn more about Flow Rate and Speed here:https://brainly.com/question/34416984
#SPJ3
The ferris wheel at the landmark navy pier in chicago takes 7 minutes to make one full rotation. the height, h, in feet, above the ground of one of the six-person cars can be modeled by , where t is time, in minutes. using for one full rotation, this car's minimum height, in feet, is
The Ferris wheel at the landmark navy pier in Chicago takes 7 minutes to make one full rotation. This gives car's minimum height is 10 feet.
What is range of modeled sine function?As the value of a function which is modeled in sine function vary from -1 to +1. The range of modeled sine function is from [-1,+1]
Given information-
The Ferris wheel at the landmark navy pier in Chicago takes 7 minutes to make one full rotation.
The function of height (h) modeled is in the sine function.
The time (t) is in minutes.
In the given function for the height for the time and height graph the sine function is in the product with the number 70.
As the value of sine function varies from -1 to +1. Thus the maximum height of the car should be at +1 value of sine and the minimum height of the car should be at -1 value of sine.
Thus for the minimum height the value of sine must be -1. As function is in the product with the number 70. Thus the value will of height will be,
H(t)=70(-1)+80
H(t)=10
Thus, this car's minimum height is 10 feet.
Learn more about the range of sine function here;
https://brainly.com/question/10879727
Two people are pushing on a desk to the right with a force 15n each what is the net force on the desk
If energy is absorbed because chemical reaction is ______.
A. a product
B. limiting
C. exothermic
D. endothermic
I MARK BRAINLIEST, PLEASE HELP, THANKS IN ADVANCE! :))
The reaction is D. endothermic.
Explanation:Absorption or need of energy from surroundings is called endothermic process. Heat is the major common form of energy which is absorbed in this process. In this process, enthaply of reactant is less than the product.
For example, an ice cube placed in the hand for some time starts to melt and it takes energy in the form of heat from the hand. This process always requires energy because of the breaking of existing and formation of new chemical bonds.
Ron hits his golf ball but is disappointed when it doesn't follow the course to the left. what does newton's first law of motion say about the travel of an object?
a.every action has an equal and opposite reaction applies.
b.inertia accelerates due to the unbalanced forces present.
c.an object at rest will move when external force is applied.
d.it will travel in a straight path unless changed by an external force. eliminate
Answer: the answer is D if you do t wanna read all that
_____ is the rate of change in velocity.
Answer:
Acceleration
Explanation:
Acceleration is the rate of change in velocity. Mathematically, it is given by :
[tex]a=\dfrac{v-u}{t}[/tex]
Where
v = final velocity of an object
u = initial velocity of an object
t = time taken
It can also be written in differentiating form as :
[tex]a=\dfrac{dv}{dt}=\dfrac{\Delta v}{\Delta t}[/tex]
For an freely falling object, the value of acceleration is equal to g i.e. 9.8 m/s².
An electron is ejected at a speed of 1.7*10^6 m/s from the electron gun of a computer monitor. If the viewing screen is 32 cm from the end of the gun, how far will the electron travel in the vertical direction before hitting the screen?
The air in a cool region underneath cloud cover will have _____ a region with no cloud cover.
Answer:
The air is a homogeneous mixture of gases that make up the Earth's atmosphere, which remain around the planet by the attraction force of gravity.
Its properties changes with the altitude, the pressure, the temperature and the density. For example, there is a relation that is inversely proportional between the temperature and the air density.
When the temperature decreases the density increases.
Therefore, the air in a cool region of the atmosphere will be denser than the air in a hot region of the atmosphere.
In other words:
The air in a cool region underneath cloud cover will have a higher density than a region with no cloud cover
A man pulls on his dog's leash to keep him from running after a bicycle. Which term best describes this example? Select one: A. negative work B. positive work C. negative force D. positive force
Answer:negative work
Explanation:
This is right
A bus is moving and has 500000 joules of kinetic energy. The brakes are applied and the bus stops. How much work is needed to stop the bus?
The work needed to stop the bus is 500000 J. The work done by the brakes to stop the bus is equal to the change in kinetic energy of the bus.
The initial kinetic energy of the bus is 500000 J. When the bus stops, its kinetic energy is zero.
Therefore, the work done by the brakes is:
W = ΔKE = KE_final - KE_initial = 0 - 500000 J = -500000 J
The negative sign indicates that the work is done by the brakes on the bus.
Therefore, the work needed to stop the bus is 500000 J.
To know more about kinetic energy:
https://brainly.com/question/999862
#SPJ12
The amount of work that is needed to stop the bus is the same energy it has so 500000 joules
How to find the work needed ?The work needed to stop the bus is equal to the bus's kinetic energy.
Work is the transfer of energy from one object to another.Kinetic energy is the energy of an object due to its motion.In this case, the work done by the brakes is used to convert the bus's kinetic energy into heat energy. The heat energy is dissipated into the environment.
Therefore, the work needed to stop the bus is 500000 joules.
Find out more on kinetic energy at https://brainly.com/question/8101588
#SPJ4
Briefly describe the three intelligences included in Robert Sternberg’s triarchic theory of human intelligence.
Answer:
Responses may vary but should include some or all of the following information: Sternberg’s theory of intelligence includes analytical, practical, and creative intelligence. Analytical intelligence is the type of intelligence used to problem solve. It involves abstract reasoning ability and evaluation skills. Practical intelligence is the type of intelligence that involves the ability to understand everyday tasks and how efficient one is in adapting to the surrounding environment. Creative intelligence is the type of intelligence that involves the ability to react to novel situations or stimuli.
Explanation:
hope this helped! ^-^
Robert Sternberg's triarchic theory includes analytical intelligence (problem-solving, analysis), creative intelligence (creating, imagining), and practical intelligence (application of knowledge in day-to-day situations).
Explanation:Robert Sternberg's triarchic theory of human intelligence consists of three types or categories: analytical intelligence, creative intelligence, and practical intelligence. Analytical intelligence relates to problem-solving and the analytical evaluation of information. For example, answering a multiple-choice quiz requires analytical intelligence. Creative intelligence involves creating, designing, imagining, or supposing. A student using creative intelligence might generate innovative ideas for a school project. Practical intelligence pertains to the application of intellectual skills in everyday contexts. One might use practical intelligence when navigating a social situation or solving real-world problems.
Learn more about Sternberg's triarchic theory here:https://brainly.com/question/33267744
#SPJ6
1.The question below refers to the following graph.
What is the approximate period of this wave?
15 centimeters
15 seconds
10 seconds
5 seconds
2. The question below refers to the following graph.
What is the wavelength of this wave?
10 cm
15 cm
60 cm
cannot be determined
3. The question below refers to the following graph.
What is the frequency of this wave?
1 wave/sec
10 waves/sec
0.1 wave/sec
cannot be determined
1. 10sec
2. Can not be determined
3. 0.1wave/sec
Answer :
(1) T = 10 seconds
(2) Wavelength cannot be determined.
(3) Frequency, [tex]\nu=0.1\ waves/sec[/tex]
Explanation :
(1) From the given graph :
Time period of the wave is defined as the time taken by it to complete one cycle.
So, the period of this wave is (C) " 10 seconds".
(2) The distance between two consecutive crest or the trough is called the wavelength of the wave.
From the graph it is clear that the distance between two consecutive crests is 10 cm(see attached figure).
So, the correct option is (a) "10 cm".
(3) As the time period of the wave is 10 seconds.
So, [tex]f=\dfrac{1}{T}[/tex]
[tex]f=\dfrac{1}{10\ s}\ waves/sec[/tex]
[tex]f=0.1\ waves/sec[/tex]
So, the correct option is (c) " 0.1 wave/sec ".
Which changes in an electric motor will make the motor stronger? Check all that apply.
To strengthen an electric motor, increase the number of coils, enhance the magnetic field's strength, and optimize the commutation process.
Explanation:To make an electric motor stronger, several changes can be implemented. Increasing the number of coils in the motor will increase the torque, as the magnetic force exerted on each coil contributes to the overall twisting force on the motor's shaft. Enhancing the strength of the magnetic field within the motor, either by using stronger magnets or by increasing the current that produces the magnetic field, can also lead to a more powerful motor. Finally, ensuring the efficiency of the commutation process - the timing of the current's reversal to maintain continuous torque - is also crucial for motor strength. Factors such as the precise adjustment of commutators and brushes can minimize energy loss and improve performance.
Which formula represents Charles’s law? P1V1 = P2V2 V1T1 = V2T2
Charles's law formula describes a direct relationship between the volume and absolute temperature of a gas at constant pressure. The formula is V1/T1 = V2/T2. It explains why gas contracts or expands with temperature changes.
Explanation:The formula for Charles's law describes a direct relationship between the volume and absolute temperature (measured in Kelvin) of an ideal gas, provided the pressure remains constant. The formula is V1/T1 = V2/T2 where V1 and V2 are the initial and final volumes and T1 and T2 are the initial and final temperatures.
For example, if you have a gas in a balloon at room temperature (say, 300 Kelvin), and the balloon is inflated to a certain volume, if you then cool the gas to half the initial temperature (150 Kelvin), the volume of the gas (balloon) will also contract to half of its initial volume. This is the principle of Charles's law, showing a direct temperature-volume relationship in gases.
Learn more about Charles's law here:https://brainly.com/question/35451979
#SPJ6
Charles's Law is represented by the formula V₁/T₁ = V₂/T₂, which shows the relationship between the volume and temperature of a gas at constant pressure.
Charles's Law describes the relationship between the volume and temperature of a gas at constant pressure. According to this law, the volume of a gas is directly proportional to its temperature when pressure remains constant. When represented as mathematical formula the Charles's Law is:
V₁/T₁ = V₂/T₂
Here, V₁ and T₁ represent the initial volume and temperature of the gas, while V₂ and T₂ represent the final volume and temperature of the gas.
Complete Question
Which of the following formulas best describes Charles's law? V₁/T₁ = V₂/T₂ , P₁V₁ = P₂V₂ , P₁V₁/P₂V₂ , P₁/T₁ = P₂/T₂
What are the starting materials for nuclear fission
A neutron and a large nucleus.
if you're hiking in the mountains and find a cliff of granite which of these statements must be true?
A) the granite formed near the earths surface
B) the granite was uplifted or uncovered by erosion
C) the magma that formed it cooled relatively quickly
D) the granite contained continued very little feldspar and quartz
Which of the following planets has the most moons? venus mercury earth mars?