how does coal convert to electrical energy?

FeCO₃ and PbCrO₄ is insoluble in water.

Explanation:

If any substance added to water and it form ions then it is soluble in water otherwise it is insoluble in water.

a. NH₄OH - soluble in water

b. NaNO₃ - soluble in water

C. PbCrO₄ is insoluble in water

d. SrSO₄ slightly soluble in water

e. K₃PO₄ - Soluble in water

f. AgClO₄- Highly Soluble in water

g. HgCl₂ - Slightly soluble in water

h. FeCO₃ -  insoluble in water

i. NH₄Br - soluble in water

j. Li₂Cr₂O₇ - soluble in water

Answer:

0.03 mol H₂

Explanation:

In a diprotic acid titration, the first equivalence point relates to the equilibrium:

And the second equivalence point to:

We can add those two equations and we're left with:

So to calculate the moles of H₂ that were in the original acid solution we use the total volume used (in this case 600 mL).

600 mL ⇒ 600/1000 = 0.6 L

We calculate the moles of LiOH, using its molar concentration:

And now we convert moles of LiOH (or OH⁻) to moles of H₂ using the  stoichiometric ratio:

Answer: The amount of water formed is 12 moles

Explanation: Please see the attachments below

0.216 g of water is formed.

According to the question,

The concentration of HCl and NaOH are:

→ [tex]CHCl = \frac{20\times 0.80}{50}[/tex]

             [tex]= 0.32 \ M[/tex]

→ [tex]CNaOH = \frac{30\times 0.40}{50}[/tex]

                  [tex]= 0.24 \ M[/tex]

Upon the reaction,

It will form 0.24 M of NaCl as well as 0.24 M of H₂O in 50 mL solution.

In 1000 mL,

→ [tex]1 M \ H_2O = 18 \g \ H_2O[/tex]

Now,

→ 50 mL of 0.24 M H₂O will contain:

= [tex](18\times 0.24)\times \frac{50}{1000}[/tex]

= [tex]0.216 \ g[/tex] (water)

Thus the response above is right.

Learn more:

https://brainly.com/question/12450374

Answer:

Option (C) is correct.

Explanation:

Decomposition reaction: [tex](NH_{4})_{2}CO_{3}\rightarrow 2NH_{3}+CO_{2}+H_{2}O[/tex]

Molar mass of [tex]CO_{2}[/tex] = 44.01 g/mol

No. of moles = (mass)/(molar mass)

So, 6.52 g of [tex]CO_{2}[/tex] = [tex]\frac{6.52}{44.01}[/tex] moles of [tex]CO_{2}[/tex] = 0.148 moles of [tex]CO_{2}[/tex]

According to balanced equation-

1 mol of [tex]CO_{2}[/tex] is produced from decomposition of 1 mol of [tex](NH_{4})_{2}CO_{3}[/tex]

So, 0.148 mol of [tex]CO_{2}[/tex] is produced from decomposition of 0.148 mol of [tex](NH_{4})_{2}CO_{3}[/tex]

Hence, option (C) is correct.

Answer:

The answer to the given question is: dioxin acts by mimicking the role of transcription factors.

Explanation:

Dioxin acts by mimicking the action of regulatory proteins that influence the binding of RNA polymerase to a promoter.

Transcription occurs in the three steps—initiation, elongation, and termination. Transcription factors are proteins that controls the rate of transcription of genetic information from DNA to messenger RNA, by binding to a specific DNA sequence. Transcription factors are directly involved in regulating gene expression.

Transcription factors are a very diverse family of proteins and generally function in multi-subunit protein complexes.

Dioxins are unwanted by-products of a wide range of manufacturing processes that are harmful to health. They can cause problems with reproduction, development, and the immune system. They can also disrupt hormones and lead to cancer.

Dioxins have no common uses. They are manufactured on a small scale for chemical and toxicological research.

Dioxins are absorbed into the human body through the digestive and respiratory tracts or through skin contact. They are then distributed throughout the body. Once dioxins enter the body, they last a long time because of their chemical stability and their ability to be absorbed by fat tissue.

The highest levels of dioxins are found in some soils, consumer products such as; cigarettes, pesticides, and herbicides,  sediments and food, especially fatty foods such as meat, poultry, seafood, milk, egg and their products.

Dioxin is a by-product of various industrial chemical processes. It is suspected of causing cancer and birth defects in both humans and other animals. Apparently, it acts by entering cells and binding to proteins, altering the pattern of gene expression. Therefore, it is reasonable to propose that dioxin acts by mimicking the role of transcription factors.

Dioxin acts by mimicking the action of regulatory proteins that influence the binding of RNA polymerase to a promoter.

Transcription occurs in the three steps—initiation, elongation, and termination. Transcription factors are proteins that controls the rate of transcription of genetic information from DNA to messenger RNA, by binding to a specific DNA sequence. Transcription factors are directly involved in regulating gene expression.

Transcription factors are a very diverse family of proteins and generally function in multi-subunit protein complexes.

Dioxins are unwanted by-products of a wide range of manufacturing processes that are harmful to health. They can cause problems with reproduction, development, and the immune system. They can also disrupt hormones and lead to cancer.

To know more about dioxin here

https://brainly.com/question/13511189

#SPJ12

Answer:

PV = nRT

Explanation:

P=pressure

V=volume

n=amount of substance

R=ideal gas constant

T=temperature

Answer:

B. created by man made dams

Explanation:

I live in Texas

Answer:

B. created by man made dams

Explanation:

I had this question pls mark brainliest

Answer: 86.7 %

Explanation:

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

a) moles of [tex]CaCO_3[/tex]

[tex]\text{Number of moles}=\frac{30.7g}{100g/mol}=0.307moles[/tex]

[tex]CaCO_3\rightarrow CaO+CO_2[/tex]

According to stoichiometry :

1 moles of [tex]CaCO_3[/tex] give = 1 mole of [tex]CO_2[/tex]

Thus 0.307 moles [tex]CaCO_3[/tex] give =[tex]\frac{1}{1}\times 0.307=0.307moles[/tex] of [tex]CO_2[/tex]

Mass of [tex]CO_2=moles\times {\text {Molar mass}}=0.307moles\times 44g/mol=13.5g[/tex]

[tex]\%\text{ yield }=\frac{\text{Actual yield}}{\text{Theoretical yield }}\times 100=\frac{11.7g}{13.5g}\times 100=86.7\%[/tex]

Therefore, the percent yield for the reaction is, 86.7%

The percent yield for the decomposition of calcium carbonate producing 11.7 g of carbon dioxide, from an initial 30.7 g of calcium carbonate, is calculated to be 86.5% through a step-by-step process involving molar mass and stoichiometry.

The question involves determining the percent yield for the reaction of heating limestone (calcium carbonate) to produce carbon dioxide.

This calculation demonstrates that the reaction had an 86.5% efficiency in producing carbon dioxide from calcium carbonate.

Answer:

The answer to your question is 164 g

Explanation:

Data

molar mass of Na₃PO₄ = ?

Molar mass is also known as molecular weight, it is the result of the sum of the total mass in grams of all the atoms that make up a mole of a particular molecule.

For Sodium phosphate the molar mass if

Na₃PO₄ = (23 x 3) + (31 x 1) + (16 x 4)

             = 69 + 31 + 64

             = 164 g

The molar mass or molecular weight of any substance is defined as the mass of 1 mole of that substance. Molar mass of [tex]Na_3PO_4[/tex] is 164g.

By using the periodic table we can check the molar mass of sodium, phosphorus, and oxygen which are Na=23, P=31, and O=16.

In [tex]Na_3PO_4[/tex] there are 3 molecules of Na (sodium), 1 molecule of P(phosphorus), and  4 molecules of  O (oxygen).

Mass of 3 molecules of Na (sodium)=  23×3.

Mass of 1 molecule of P(phosphorus) =  31×1.

Mass of 4 molecules of  O (oxygen) = 16×4.

So, the total molar mass of [tex]Na_3PO_4[/tex] is =  23×3 + 31×1 + 16×4 =164g.

Molar mass of [tex]Na_3PO_4[/tex] is 164g.

To know more about mole refer to:

https://brainly.com/question/30885025

Answer:

Directly Proportional

Explanation:

The partial pressure is defined as the pressure exerted by an individual gas that are present in a mixture as if it were alone in that particular system.

The kinetic molecular theory of gases is explained as the state of matter that is composed of tiny particles in constant motion even though there are distance between the colliding particles.They posses low density and Because of their nature gases can expansion and contraction of gas can be influenced under some condition.Unlike other fluid like liquids, the volume that gas usually occupied is empty space.

The gas particles are always in constant motion, and all the particles of the individual gases move and collide with one another and with the walls of the container they occupied. The magnitude of the gas pressure is been determined by the force with which they collide with one another.

Therefore,The rate at which collision occurs depends on the number of collisions which occur and this rate is directly proportional to the partial pressure of the vapor

Answer:

Flammability is a chemical property

Explanation:

It can only be observed or measured during a chemical change known as combustion

Answer:

flammability is a chemical process

Explanation:

burning of something is causing a chemical reaction. for example a physical property is changing the way it looks, not its chemical structure (ex. ripping up paper)

Answer:

0.0488 L

Explanation:

Step 1:

The balanced equation for the reaction. This is given below:

CaCl2(aq) + Na2CO3(aq) —> CaCO3(s) + 2NaCl(aq)

Step 2:

Determination of the number of mole of Na2CO3 in 0.0650 L of 1.50 M Na2CO3 solution.

Volume of solution = 0.0650 L

Molarity of Na2CO3 = 1.50 M

Mole of solute (Na2CO3) =?

Molarity = mole of solute /Volume of solution

1.50 = mole of solute/0.0650

Cross multiply to express in linear form.

Mole of solute = 1.5 x 0.0650

Mole of solute (Na2CO3) = 0.0975 mole

Step 3:

Determination of the number of CaCl2 that reacted.

CaCl2(aq) + Na2CO3(aq) —> CaCO3(s) + 2NaCl(aq)

From the balanced equation,

1 mole of CaCl2 reacted with 1 mole Na2CO3.

Therefore, 0.0975 mole of CaCl2 will also react with 0.0975 mole of Na2CO3.

Step 4:

Determination of the volume of CaCl2 that reacted.

Mole of solute (CaCl2) = 0.0975 mole

Molarity of CaCl2 = 2.00 M

Volume of solution =?

Molarity = mole of solute /Volume

2 = 0.0975/volume

Cross multiply to express in linear form

2 x Volume = 0.0975

Divide both side by 2

Volume = 0.0975/2

Volume = 0.0488 L

Therefore, the volume of CaCl2 that is 0.0488 L

Answer:

We need a volume of 48.75 mL of CaCl2 to react

Explanation:

Step 1: Data given

Molarity of calcium chloride = 2.00 M

Volume of Na2CO3 = 0.0650 L

Molarity of Na2CO3 = 1.50 M

Step 2: The balanced equation

CaCl2 (aq) + Na2CO3(aq) → CaCO3 + 2NaCl

Step 3: Calcumate moles Na2CO3

Moles Na2CO3 = molarity Na2CO3 * volume

Moles Na2CO3 = 1.50 M * 0.0650 L

Moles Na2CO3 = 0.0975 moles

Step 4: Calculate moles CaCl2 neede to react

For 1 mol CaCl2 we need 1 mol Na2CO3 to produce 1 mol CaCO3 and 2 moles NaCl

For 0.0975 moles Na2CO3 we need 0.0975 moles CaCl2

Step 5: Calculate volume of CaCl2 solution

Volume = moles CaCl2 / molarity CaCl2

Volume = 0.0975 moles / 2.00 M

Volume = 0.04875 L = 48.75 mL

We need a volume of 48.75 mL of CaCl2 to react

Answer:    side by side overlap of two p orbital---B

Explanation: pi bonds denoted by Greek letter , π are covalent chemical bond where there is a  side-by-side overlap of two p orbitals laterally illustrated by when two lobes of an orbital on one atom overlap two lobes of an orbital on the other atom.

At the shared nodal plane of the overlapping orbitals, there exists an electron density which is equal to zero which also serves as a nodal plane for the molecular orbital of the pi bond. Double and triple bonds contain one sigma bond with one or two pi bonds between atoms.

A pi bond (π bond) is formed by the side-by-side overlap of two p orbitals, creating areas of orbital overlap on opposite sides of the internuclear axis with a nodal plane where no electrons can be found. Pi bonds are significant in molecular chemistry, particularly in unsaturated hydrocarbons and other molecules with multiple bonds.

A pi bond (π bond) is a type of covalent bond that is formed by the side-by-side overlap of two p orbitals. This overlap occurs in a manner such that the regions of orbital overlap are situated on opposite sides of the internuclear axis, which is the line running directly between the nuclei of the bonding atoms. In addition, within a pi bond, there exists a nodal plane along the internuclear axis, which means there is a plane with zero probability of finding an electron.

In molecular structures, pi bonds are significant because they contribute to the bonding interactions that occur in addition to sigma bonds, which are formed by end-to-end overlap of orbitals. It is important to note that pi bonds provide molecular systems with additional stability and are typically found in unsaturated hydrocarbons such as alkenes and alkynes, as well as in many other types of molecules with multiple bonds between atoms.

Answer : The number of molecules of nitrogen, oxygen, carbon dioxide and argon is, [tex]1.88\times 10^{23}[/tex], [tex]5.03\times 10^{23}[/tex], [tex]1.19\times 10^{20}[/tex] and [tex]2.23\times 10^{21}[/tex] respectively.

Explanation :

First we have to calculate the total moles of mixture of gas by using ideal gas equation.

[tex]PV=nRT[/tex]

where,

P = Pressure of mixture of gas = 1.59 atm

V = Volume of mixture of gas = 6.51 L

n = number of moles mixture of gas = ?

R = Gas constant = [tex]0.0821L.atm/mol.K[/tex]

T = Temperature of mixture of gas = [tex]43^oC=273+43=316K[/tex]

Putting values in above equation, we get:

[tex]1.59atm\times 6.51L=n\times (0.0821L.atm/mol.K)\times 316K[/tex]

[tex]n=0.399mol[/tex]

Now we have to calculate the moles of nitrogen, oxygen, carbon dioxide and argon.

Moles of nitrogen = [tex]78.08\% \times 0.399=\frac{78.08}{100}\times 0.399=0.312mol[/tex]

Moles of oxygen = [tex]20.94\% \times 0.399=\frac{20.94}{100}\times 0.399=0.0836mol[/tex]

Moles of carbon dioxide = [tex]0.0500\% \times 0.399=\frac{0.0500}{100}\times 0.399=0.000199mol[/tex]

Moles of argon = [tex]0.930\% \times 0.399=\frac{0.930}{100}\times 0.399=0.00371mol[/tex]

Now we have to calculate the number of molecules of nitrogen, oxygen, carbon dioxide and argon.

As, 1 mole of nitrogen contains [tex]6.022\times 10^{23}[/tex] number of molecules of nitrogen.

So, 0.312 mole of nitrogen contains [tex]0.312\times 6.022\times 10^{23}=1.88\times 10^{23}[/tex] number of molecules of nitrogen.

and,

As, 1 mole of oxygen contains [tex]6.022\times 10^{23}[/tex] number of molecules of oxygen.

So, 0.0836 mole of oxygen contains [tex]0.0836\times 6.022\times 10^{23}=5.03\times 10^{23}[/tex] number of molecules of oxygen.

and,

As, 1 mole of carbon dioxide contains [tex]6.022\times 10^{23}[/tex] number of molecules of carbon dioxide.

So, 0.000199 mole of carbon dioxide contains [tex]0.000199\times 6.022\times 10^{23}=1.19\times 10^{20}[/tex] number of molecules of carbon dioxide.

and,

As, 1 mole of argon contains [tex]6.022\times 10^{23}[/tex] number of molecules of argon.

So, 0.00371 mole of argon contains [tex]0.00371\times 6.022\times 10^{23}=2.23\times 10^{21}[/tex] number of molecules of argon.

Therefore, the number of molecules of nitrogen, oxygen, carbon dioxide and argon is, [tex]1.88\times 10^{23}[/tex], [tex]5.03\times 10^{23}[/tex], [tex]1.19\times 10^{20}[/tex] and [tex]2.23\times 10^{21}[/tex] respectively.

To calculate the number of molecules of each gas in the sample, use the ideal gas law equation and the percent composition given. Then, calculate the number of molecules using Avogadro's number.

To calculate the number of molecules of each gas in the sample, we need to use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

To calculate the number of moles for each gas, we can use the percent composition given in the question and assume the sample contains 100 moles of total gas. From there, we can calculate the number of molecules using Avogadro's number, which is approximately 6.022 x 10^23 molecules/mole.

The number of molecules of nitrogen (N₂) in the sample is (78.08/100) x 100 moles x 6.022 x 10^23 molecules/mole, and similarly, the number of molecules of oxygen (O₂), carbon dioxide (CO₂), and argon (Ar) can be calculated.

https://brainly.com/question/14948089

#SPJ3

Answer: The distillation flask being heated in a heating mantle. The vapors condense and drip from the condenser into the flask. As the distillate begins to drop from the condenser, the temperature observed on the thermometer should be changing steadily.

Explanation:

answer above

The answer for the following problem is mentioned below.

Explanation:

Given:

molarity of the potassium chloride solution (m) = 0.7 M

no of moles present in the potassium chloride solution (n) = 8.30 moles

To find:

volume of the potassium chloride solution (V)

We know;

m = [tex]\frac{n}{V}[/tex]

Where;

m represents the molarity of potassium chloride solution

n represents the no of moles of potassium chloride solution

V represents the volume of the solution

So;

0.7 = [tex]\frac{8.30}{V}[/tex]

V = 11.8 litres

Therefore the volume of potassium chloride solution is 11.8 litres.

Answer:

11

Explanation:

I scoured across many websites to finally get this answer. And it is right, I just did the Instruction.

Answer:

11

Explanation:

e2020

Answer:

its b I believe of it's not sorry

Answer:the answer is b

Explanation:

Answer:

A single-replacement reaction is a chemical reaction in which one element is substituted for another element in a compound, generating a new element and a new compound as products.

1) 2P

2) Average speed does not change

Explanation:

1)

To solve the first part of the problem, we can use Boyle's Law, which states that:

"For a fixed mass of an ideal gas kept at constant temperature, the pressure of the gas is inversely proportional to its volume"

Mathematically:

[tex]pV=const.[/tex]

where

p is the pressure of the gas

V is its volume

For the Xe gas in this problem we can write

[tex]p_1 V_1 = p_2 V_2[/tex]

where:

[tex]p_1 = P[/tex] is the initial pressure

[tex]V_1=V[/tex] is the initial volume

[tex]V_2=\frac{V}{2}[/tex] is the final volume

Solving for p2, we find the final pressure:

[tex]p_2=\frac{P V_1}{V_2}=\frac{pV}{V/2}=2P[/tex]

So, the pressure has doubled.

2)

The average speed of the atoms/molecules in the gas is given by the formula

[tex]v_{rms}=\sqrt{\frac{3RT}{M}}[/tex]

where

R is the gas constant

T is the absolute temperature (in Kelvin) of the gas

M is the molar mass of the gas

[tex]v_{rms}[/tex] is known as rms speed of the particles in the gas

From the formula, we see that the speed of the atoms in the gas depends only on the temperature of the gas.

In the Xe(g) gas in this problem, the temperature is kept constant; therefore, since nothing changes in the formula, this means that the average speed also does not change.

The pressure of the gas is doubled and the average speed of the gas molecules does not change.

According to Boyle's law, the volume of a given mass of gas is inversely proportional to the pressure at constant temperature. Now;

Initial pressure of the gas (P1) = P

Initial volume of the gas(V1) = V

Final volume of the gas (V2) = V/2

Final pressure of the gas (P2) = ?

Using the relation of Boyle's law;

P1V1 = P2V2

P2 =  P1V1/V2

P2 = P × V/V/2

P2 = 2P

The pressure is doubled

Regarding the average speed of gas molecules, the average speed of a gas molecules depends on the temperature from the relation;

[tex]vrms = \sqrt{\frac{3RT}{M} }[/tex]

If the temperature is held constant, the average speed of gas molecules is does not change.

Learn more: https://brainly.com/question/14191541

Answer:

15.0 moles of silver chloride are produced from 15.0 mol of silver nitrate.

The number of mole of silver chloride, AgCl produced from the reaction is 15 moles.

AgNO₃ + NaCl —> NaNO₃ + AgCl

From the balanced equation above,

1 mole of AgNO₃ reacted to produce 1 mole of AgCl.

With the above information, we can obtain the number of mole of AgCl produced by the reaction of 15 moles of AgNO₃. This can be obtained as follow:

From the balanced equation above,

1 mole of AgNO₃ reacted to produce 1 mole of AgCl.

Therefore,

15 moles of AgNO₃ will also react to produce 15 moles of AgCl.

Thus, 15 moles of AgCl were obtained from the reaction.

Learn more about stoichiometry: https://brainly.com/question/25910524

7.5 M is the concentration of 60 ml of H3PO4 if it is neutralized by 225 ml of 2 M Ba(OH)2.

Explanation:

Data given:

volume of phosphoric acid, Vacid =60 ml

volume of barium hydroxide, Vbase = 225 ml

molarity of barium hydroxide, Mbase = 2M

Molarity of phosphoric acid, Macid =?

the formula for titration is used as:

Macid x Vacid = Mbase x Vbase

rearranging the equation to get Macid

Macid = [tex]\frac{Mbase x Vbase}{Vacid}[/tex]

Macid =[tex]\frac{225 X 2}{60}[/tex]

Macid = 7.5 M

the concentration of the phosphoric acid is 7.5 M and the volume is 60 ml. Thus 7.5 M solution of phosphoric acid is used to neutralize the barium hydroxide solution of 2M.

Answer:

= 5 M

Explanation:

2H3PO4 + 3Ba(OH)2 ----> Ba3(PO4)2 + 3H2O

moles Ba(OH)2 = molarity x litres

= 2 M x 0.225 L

= 0.45 mol

3 moles Ba(OH)2 react with 2 moles H2SO4

So moles H2SO4 = 2/3 x moles Ba(OH)2

= 0.3 mol

molarity = moles / litres

= 0.3 mol / 0.06 L

=5M

Among the substances tested, table salt (NaCl) is the one that caused the lightbulb to burn the brightest because it is a strong electrolyte that dissociates completely into ions in an aqueous solution, enabling efficient electrical conductivity.

In Professor Popsnorkle's demonstration of electrical conductivity in solutions, the substances tested included ethanol (CH3CH2OH), methanol (CH3OH), table salt (NaCl), table sugar (C12H22O11), and acetic acid (CH3COOH). To identify which substance caused the lightbulb to burn the brightest, we must understand that only solutions containing freely mobile, charged species—ions—can conduct electricity. Among the choices, table salt, or NaCl, when dissolved in water, dissociates into sodium ions (Na+) and chloride ions (Cl-), making it a strong electrolyte and allowing the solution to conduct electricity very well.

The other substances listed are either weak electrolytes or nonelectrolytes. Ethanol and table sugar are nonelectrolytes and do not contain dissolved ions, and thus they would not make the lightbulb shine brightly. Methanol is also a nonelectrolyte like ethanol. Acetic acid is a weak electrolyte because it only partially dissociates in solution. Therefore, table salt (NaCl) is the one that caused the bulb to burn the brightest due to its ability to completely dissociate into ions, which conducted the electrical current efficiently in the aqueous solution.

Answer:

C. A stretch of raised land, often built to help control flooding and the flow of a river.

Explanation:

Embankments are made typically of construction adjacent to the river from spoil excavated from its bank.

Answer:

Because allowing the water to get too cold implies that some precipitate will be formed.

Explanation:

If you allow the hot tub to cool down, there will be a reduction in the solubility of the solutes. In this light, if its then get too could, the solubility of the solutes will be so low in such a way that it becomes inevitable that some of the solute must then leave the solution, hence creating a precipitate which is the fine solid that has been mentioned in the question.

Final answer:

In hot tubs, a drop in water temperature leads to decreased solubility of solutes, causing precipitation and cloudiness. The human body's natural cooling mechanisms are not effective in 40°C water, as sweating does not cool the body underwater and heat cannot be transferred to the hotter surrounding water.

Explanation:

Hot tubs are often equipped with water at a temperature of around 38°C to maintain hygienic conditions, since the heat assists with dissolving various solid solutes that keep the water clear. If the water temperature drops, the solubility of these solutes decreases, leading to a precipitation of solid particles, which causes the water to appear cloudy and fill with a fine solid. This effect is due to the dependence of solubility on temperature; as the water cools, it is less able to hold the dissolved solutes in solution.

When our bodies are immersed in a hot tub with water at 40.0°C, physiological responses such as sweating and increased blood circulation to the skin's surface occur to dissipate excess heat. However, this has little cooling effect in the hot tub scenario because sweating does not lead to evaporative cooling underwater, and the hot tub's water temperature being above typical human body temperature means that the body cannot effectively transfer heat to the surroundings.

Answer: True.

Explanation: Two icebreaker ship polarstern from Germany and the Akademik fedoeov from Russia sailed on a mission towards central Arctic. Their tasks were to find an ice floe so strong and thick it would ultimately freeze the polarstern, entrapping the ship for a whole year within the ice.

There is the danger of been attack by polar bears, because polar bears lives in the Arctic. And there is also the risk of the ship been crushed by frozen ice.

Answer:

To a certain extent absolutly. They can impact human health for the worse and more.

Answer:

Invasive species are those specie that is not specific to a certain location, and it spread to a degree and is harmful for human economy.

Explanation:

For e.g. Green Crab

Invasive species can affect human in a way that they threaten biodiversity and alter the ecosystem. It greatly involve in loss of human economy, its function. It also affect human health as well. It is also harmful for our natural resources.

Malaria is caused also by invasive species.

Question:

a. Diffusion

b. Facilitated diffusion

c. Both

d. Neither

1. movement to area of lower concentration

2. movement across a membrane

3. steroid transport into cell

4. requires energy

5. movement assisted by proteins

6. glucose transport into cell

Answer:

The sorting is as follows

a. (1)

b. (5 and 6)

c. (1 and 2)

d. (4)

Explanation:

Diffusion is the movement of particles across a membrane from a high concentration region to one with a lower concentration of the diffusing substance

Here we have the correct sorting as follows

a. Diffusion

3. steroid transport into cell

b. Facilitated diffusion

5. movement assisted by proteins

6. glucose transport into cell

c. Both

1. movement to area of lower concentration

2. movement across a membrane

d. Neither

4. requires energy

Answer:

In sea water;

The salt is the solute while the water is the solvent

In soda water;

The water is the solvent, the carbon dioxide is the solute

In air;

The nitrogen is the solvent while the oxygen and the other substances in small amounts are the solutes

Explanation:

A solution is a homogeneous mixture of two or more substances which includes a solvent and a solute. A solute in a solution is dissolved in the solvent of the solution.

Therefore, the solvent is the major part of a solution as it takes in the solvent to form the solution.

In sea water, a solution with a high concentration of salts

The salt is the solute while the water is the solvent

In soda water,  which is a mixture of CO₂ in water,

Here we have in the soda solution, the water is the solvent while the carbon dioxide is the solute

The water is the solvent, the carbon dioxide is the solute

Air a solution made up by a mixture of Nitrogen 78%, oxygen 21%, and small amount of water carbon dioxide and argon

The nitrogen is the solvent while the oxygen and the other substances in small amounts are the solutes.

Answer:

1)solute 2) sovolent 3) sovolent

Explanation:

edgyyy

Answer:

Clouds form when air reaches its dew point, the temperature when the air is saturated. This can happen in two ways. First, the air temperature can stay the same while the humidity increases. This is common in locations that are warm and humid.

Read more on Brainly.com - https://brainly.com/question/3946379#readmore

Explanation:

Final answer:

Clouds form when the air temperature cools to the dew point, causing water vapor to condense into liquid droplets around condensation nuclei. Without reaching this temperature, the air cannot saturate and clouds will not form. Understanding dew point is essential for predicting weather conditions.

Explanation:

Cloud formations occur in the atmosphere when the air temperature cools to the dew point, the temperature at which water vapor present in the air begins to condense into liquid water droplets, forming clouds. The air must reach saturation, which can happen either by adding moisture through evaporation or by cooling the air until it can no longer hold the water vapor, causing condensation.

Clouds may form due to contact cooling or uplift mechanisms, where air rises, expands, and cools. Condensation also necessitates the presence of condensation nuclei such as dust or smoke particles, around which moisture droplets can form. The importance of dew point lies in its role in forecasting weather; when the air temperature drops to the dew point, latent heat is released, stopping the temperature from falling further, and possibly leading to precipitation if clouds are formed.