How is lightning formed with explanation l?

Answer: lif

Explanation:

lif is the answer i checked it and the person above is one hundred percent wrong. lif is the right answer.

Answer:

[tex]3.54* 10^{22}[/tex] N

Explanation:

Using the formula you gave:

[tex]F_g = \frac{6.67*10^{-11}*2.0*10^{30}*5.97^{24} }{(1.5*10^{11})^2 }[/tex]

D.

A current can be produced in a coil of wire as a magnet is being thrust though the  coil.

Brainliest, please?

Answer:

The correct answer is the third

Force equals mass times acceleration

Explanation:

Newton's second law says that force equals mass times the acceleration of the body

            F = m a

This is the most used way to solve problems

The correct answer is the third

Newton's third law states that forces always work in pairs, by action and reaction

Newton's first law states that an object per macerate with constant speed unless some force modifies this state.

Answer:

If they both remain constant they ain't moving, It states that the rate of change of velocity of an object is directly proportional to the force applied and takes place in the direction of the force. It is summarized by the equation

Explanation:

To find the mass of an object hanging 12.6 m above the surface of the earth is approximately 22.04 kg.

The mass of an object can be determined using the formula for gravitational potential energy (G.P.E). G.P.E. is calculated using the formula G.P.E. = mgh, where m is the mass in kg, g is the acceleration due to gravity which is approximately 10 m/s², and h is the height in meters.

To find the mass, rearrange the formula to: m = G.P.E. / (g * h).

Substituting the given values into the formula, we have m = 2778.3 J / (10 m/s² * 12.6 m). Solving this equation gives us the mass of the object.

Calculating the mass, m

= 2778.3 J / (10 m/s² * 12.6 m)

m ≈ 22.04 kg

Answer:

The general theory of relativity (or general relativity for short) is a major building block of modern physics. It explains gravity based on the way space can 'curve', or, to put it more accurately, it associates the force of gravity with the changing geometry of space-time.

Answer: A) reactants

Explanation:

Reactants are the substances that have chemical reactions when they are combined, whereas the product is what comes from the reactants’ chemical reactions.

Answer:

A)reactants

Explanation:

I think the correct answer is reactants because the substances that go into a chemical reaction are called reactants.

Sorry if it's wrong:(

Answer:

C

Explanation:

Answer:

B

Explanation:

Gravity is an invisible force, and so is magnetism and electricity. Friction involves the rubbing of things together to create energy.

Answer:

B

Explanation:

Friction is the force that you feel whenever you try to drag an object across a surface. Like a box along the floor, or your hand across a counter-top. It requires two objects to be in direct contact with each other (don't worry about air friction AKA "drag").

Answer: adding green, red, and blue light produces white light

Explanation:the process of color subtraction is a useful way of predicting the color appearance of an object, if the color of the light and pigments are known. If you use the complementary color scheme, the colors of light that will be absorbed by a given material are determined.

Final answer:

The phrase "color by subtraction of light" describes the process where color is created by absorbing certain wavelengths while reflecting others, used in subtractive color theory applications like printing and photography.

Explanation:

Subtractive Color Theory

The phrase "color by subtraction of light" refers to the subtractive color theory, which is a method of creating color by filtering out certain wavelengths of light. This concept is commonly used in color printing and photography, where colors are produced by absorbing parts of the light spectrum and reflecting the rest. For example, when blue paint is applied to a canvas, it absorbs all colors except for blue, which is reflected back to the eyes of the viewer.

In subtractive color mixing, the primary colors are red, yellow, and blue. When these are mixed, they produce the secondary colors of green, orange, and purple. This is the opposite of additive color theory, where colors are created by mixing different lights (red, green, and blue) and the combination of all creates white light. The sensation of color in photographic transparencies is achieved by the substrate absorbing specific wavelengths of light — for instance, to display blue, the material must absorb yellow light.

Subtractive color theory is essential in the development of the CMYK color model, which uses cyan, magenta, and yellow as primary colors, and is central to processes such as full-color printing and other applications where pigmentation and light reflection play a critical role in color creation.

Answer:

B

Explanation:

Electromagnetic spectrum includes visible light which we see all the time reflecting off objects to give them colours, mechanical waves like sound require something to move in, its the reason why people say you can't scream in space because space is a giant vacuum. No not the kind you use to clean up the mess you made from breakfast. The kind that has no air. So sound can be heard on earth as it is not a vacuum, air moves freely and transfers sounds vibrations all around you to be absorbed by walls and other stuff in comes in contact with.

Extra information:

Sound travels further in water because the molecules are closer together meaning that transferring the energy is easier. This is how Blue wales can communicate from hundreds of miles away.

Reverberation is why your voice sounds different in a gym compared to a living room; hard surfaces in a gym increase reverberation time, creating echoes that can make sound seem mushy, while softer surfaces in a living room shorten it, providing clearer sound quality.

Reverberation explains why your voice sounds different in a gym compared to your living room due to the unique acoustic properties of different environments. In a gymnasium, the hard surfaces result in a longer reverberation time as sound waves bounce off and overlap each other, creating what is known as the comb effect. This often leads to mushy or muddled musical sounds and makes speech more difficult to understand due to the multiple echoes. Conversely, a living room typically has softer surfaces and objects that absorb sound, resulting in shorter reverberation times and a clearer, more intimate sound quality.

Reverberation provides us with clues about the size of a space and its material composition, affecting our perception of sound. For instance, large concert halls are designed with optimal reverberation times to enhance music, while spaces intended for speech, like lecture halls, aim for shorter reverberation to maintain speech clarity. Adjusting the level of reverberation can also add fullness to recorded voices or create the illusion of a different performance space.

Answer:

Explanation:

the bit the most kinetic energy is where it is going down

the bit with the most potential is the curb

The places with the most potential are the places at the highest points of the track (i.e., right behind where the coaster is situated, and towards the end of the loop). These places have the highest stored energy, that can be used.

The places with the most kinetic is where the low points of the track is at. In this case, it will be where the coaster is situated, and the latter half of the loop.

Answer:

Frequency

Explanation:

To calculate the mass of an object that weighs 1,225 N on Earth, divide the weight by the acceleration due to gravity (9.80 m/s²). The mass is equal to 125 kg.

To calculate the mass of an object that weighs 1,225 N on Earth, we can use the equation w = mg, where w is the weight, m is the mass, and g is the acceleration due to gravity (9.80 m/s² on Earth).

Rearranging the equation, we have m = w/g. Substituting the given values, m = 1,225 N / 9.80 m/s² = 125 kg.

Therefore, the mass of the object is 125 kg.

https://brainly.com/question/28122305

#SPJ12

Answer:

D

Explanation:

i took lots of time on the lesson

Answer:

The two most common factors that determine the air resistance are the speed of the object and its cross-sectional area. Greater speed causes greater air resistance, and increased area increases air resistance as well. It also depends on an object's shape.

Number of wavelengths

-----------------------------------  :  ⇒ Frequency

              Time

Distance traveled

--------------------------  :  ⇒ Speed

          Time

Some features of sound wave that describes the motion of the sound wave include wavelength, speed and frequency.

There are several features of sound wave that decribes the motion of the sound wave and some of the features include;

Learn more about sound wave here: https://brainly.com/question/1199084

Answer:

12.8 Watts

Explanation:

P = VI

P = (2 V) (6.4 A)

P = 12.8 W

The power rating of the bulb will be 12.8 Watts. Power rating is an efficiency perameter.

The maximum power input allowed to pass through a piece of equipment is known as the equipment's power rating.

The given data in the problem is;

V is the voltage supply=  2V s

I is the current = 6.4A.

P is the power rating of the bulb =?

The power rating of the bulb is found as;

[tex]\rm P = VI \\\\ \rm P = 2 \times 6.4 \\\\ \rm P =12.8 \ Watt[/tex]

Hence the power rating of the bulb will be 12.8 Watts.

To learn more about the power rating refer to the link;

https://brainly.com/question/13787703

Answer: Decomposition uses solar energy because for hydrogen and oxygen.

Explanation:

Answer:

A. 1.4 * 10^(12) N/C

Explanation:

Parameters given:

Distance of charge from electric field, r = 0.0050 m

Charge, q = 0.0040 C

The electric field at a point, r, away from a charge, q, is given as:

E = (k * q) / r²

Where k = Coulomb's constant

E = (9 * 10^9 * 0.004) / (0.005²)

E = 1440 * 10^9 = 1.4 * 10^(12) N/C

The magnitude of the electric field at a point 0.005 m from the charge is 1.4 * 10^(12) N/C.

Answer:

Explanation:

Given that,

A charge Q = 0.004 C

We want to find the electric field at distance r = 0.005m

K = 9 × 10^9 Nm²/C²

Electric field at a point is given as

E = kQ / r²

E = 9 × 10^9 × 0.004 / 0.005²

E = 1.44 × 10¹² N/C

So, the magnitude of the electric field at 0.005m is 1.44 × 10¹² N/C.

Answer:

Fossil fuels come from the ground and are millions of years old

Explanation:

Fossil fuels come from the ground. i can infer and tell because most fossils are in the ground and also fossils are millions of years old. Fossil fuels are hydrocarbons, primarily coal, fuel oil or natural gas, and is from the remains of dead plants and animals. In  dialogue, the term fossil fuel also includes hydrocarbon-containing natural resources that are not derived from animal or plant sources.

Answer:

T = 4000 N

Explanation:

We have,

Mass of an elevator, m = 500 kg

It is moving downward with an acceleration of [tex]2\ m/s^2[/tex]. It is required to find the  tension force of the cable on the elevator. We know that when the elevator is moving downward, the net force on it is given by :

[tex]F=m(g-a)[/tex]

g is acceleration due to gravity

[tex]F=500\times (10-2)\\\\F=4000\ N[/tex]

So, the tension force of the cable on the elevator is 4000 N.

4.5 Joules. I think it'd be 4.41, but when you round it, it's 4.5.

Final answer:

The work done by gravity on a 50g pine cone falling from a 9 m high tree is 4.41 Joules, as calculated using the gravitational potential energy formula.

Explanation:

The amount of work done by gravity on a falling object is equal to the change in the object's gravitational potential energy (GPE). The GPE formula is GPE = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m/s² on Earth), and h is the height in meters. For a pine cone with a mass of 50g (which is 0.05 kg) falling from a height of 9 m, the work done by gravity is:

GPE = mgh = (0.05 kg) x (9.8 m/s²) x (9 m) = 4.41 Joules

Thus, 4.41 Joules of work is done by gravity when the pine cone falls from the top of a 9 m high tree.

Answer:

no

In particle physics, a magnetic monopole is a hypothetical elementary particle that is an isolated magnet with only one magnetic pole (a north pole without a south pole or vice versa). A magnetic monopole would have a net "magnetic charge".

Answer:

foam but thats what i heard from other people

Explanation:

Answer:

If you want to make your insulation even more effective at blocking and absorbing noise that passes through walls or ceilings, you can add a few finishing touches before replacing the drywall. As I’ve explained in my article on the best wall soundproofing, you can add a layer of MLV over the insulation .

Explanation: