Answer:
The answer to your question is 97 ml
Explanation:
Data
volume = ? ml
concentration = 1.01 M LiNO₃
mass = 6.63 g
Process
1.- Calculate the molecular weight of LiNO₃
LiNO₃ = (1 x 6.94) + (1 x 14) + (16 x 3)
= 6.94 + 14 + 48
= 69 g
2.- Calculate the moles of LiNO₃
69 g ------------------ 1 mol
6.63 g --------------- x
x = (6.63 x 1) / 69
x = 0.096 moles
3.- Calculate the volume
Molarity = moles / volume
-Solve for volume
Volume = Molarity x moles
-Substitution
Volume = 1.01 x 0.096
-Result
Volume = 0.097 l or 97 ml
The number of mL of of 1.01 M LiNO3 solution when solution has 6.63 g of solute should be 97 ml.
Calculation of the number of mL:Since
concentration = 1.01 M LiNO₃
mass = 6.63 g
First we have to determine the molecular weight of LiNO₃ i.e.
LiNO₃ = (1 x 6.94) + (1 x 14) + (16 x 3)
= 6.94 + 14 + 48
= 69 g
Now the moles of LiNO₃
69 g ------------------ 1 mol
6.63 g --------------- x
x = (6.63 x 1) / 69
x = 0.096 moles
Now the volume is
Molarity = moles / volume
It can be like
Volume = Molarity x moles
= 1.01 x 0.096
= 0.097 l or 97 ml
Learn more about volume here: https://brainly.com/question/22695394
If I have 450mL of a 3.5 M HCl solution, what will the new molarity be if the volume is increased to 0.9L?
Explain your answer, please.
Answer:
1.75M
Explanation:
Given parameters:
Initial volume of acid, HCl = 450mL = 0.45L
Initial concentration = 3.5M
Final volume = 0.9L
Unknown:
Final concentration = ?
Solution:
This is a dilution problem in which a particular concentration is made from the stock of known concentration.
One important approach to solve this problem is to remember that the number of moles in the initial and final solution will always remain the same.
Since we know this;
Number of moles = molarity x volume;
let us find the number of moles of the initial solution;
Number of moles = 3.5 x 0.45 = 1.58moles
Now, to find the new molarity;
Molarity = [tex]\frac{number of moles }{volume}[/tex]
Input the parameters;
Molarity = [tex]\frac{1.58}{0.9}[/tex] = 1.75M
List at least 3 factors which influence the rate of a chemical reaction. (12 points)
Answer:The four main factors that affect the rate of chemical reactions are temperature, concentration, surface area, and the presence of a catalyst. cause the particles (atoms or molecules) of the reactants to move more quickly so that they collide with each other more frequently and with more energy.
Explanation: lol sorry for putting 4 factors
A mixture with medium sized particles that do not settle out is called
Answer: colloid
Explanation:
Colloids are solutions in which small sized particles are suspended throughout the solution as they do not settle own their own. Colloids are defined as the mixtures where the size of the particle is within the range of 2nm to 1000 nm. In these mixtures, physical boundary is seen between the dispersed phase and dispersed medium.
Colloids are solutions with particle size intermediate between true solutions and suspensions. Suspensions have large sized particles which settle when left undisturbed for sometime and thus can be filtered off easily. The particle size in colloids is less and hence they do not settle under the effect of gravity.
At what temperature will a balloon have a volume of 6.08 L if the temperature is 41.0 ℃ when its volume is 4.87 L? Answer in Kelvin.
P.S please show the equation steps.
Answer:
392.20K
Explanation:
-We apply Charles' Law which states that for an ideal gas at constant pressure, its volume is directly proportional to it's temperature:
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
-Given that:
[tex]V_1=4.87L, V_2=6.08\\\\T_1=41.0\textdegree C=314.15\ K\\T_2[/tex]
#We substitute in the ratio formula above and calculate for [tex]T_2[/tex]:
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}\\\\T_2=\frac{V_2T_1}{V_1}\\\\=\frac{6.08\ l\times 314.15\ K}{4.87\ L}\\\\\\=392.20\ K[/tex]
Hence, the temperature of the balloon at a volume of 6.08L is 392.20K
Which structures are common to both prokaryotic and eukaryotic cells? Check all that apply.
vacuole
cell membrane
Golgi body
ribosome
cytoplasm
endoplasmic reticulum
Answer:
cell membrane
ribosome
cytoplasm
Explanation:
Just believe in me
The structures that are common to both prokaryotic and eukaryotic cells are:
Cell membrane is the wall that cells have, allowing them to remain independent from the external environment.Ribosome are the macromolecules responsible for the synthesis or translation of amino acids.Cytoplasm is the region of a cell that is found between the nucleus and the plasma membrane, gives support, shape and movement to the cell and stores molecules.The main parts of all cells in both prokaryotes and eukaryotes are the cell or plasma membrane, and the compartment that it encloses, called the cytoplasm.
The cell membrane is characterized by being semi-permeable, dynamic and with the ability to be modified.
The cytoplasm fulfills three functions which are:
Structural it is not only the one that shapes the cell but also the key to its movements.The nutritive because it has substances that are later transformed into energy.Storage it keeps reserve substances.Ribosomes are responsible for intervening in protein biosynthesis in the cytoplasm.
Therefore, we can conclude that the structures that are common to both prokaryotic and eukaryotic cells are cell membrane, ribosome
and cytoplasm
Learn more here: https://brainly.com/question/15855551
What is the chemical difference between acids and bases?
Answer:
The chemical differences between acids and bases are: ionization and redox reaction.
Explanation:
Ionization: acids are substances that form hydrogne ion, [tex]H^{+}[/tex] as the only positively charged ion when in solution; whereas bases produce hydroxonium ion, [tex]OH^{-}[/tex] when dissociated in water. This directly affects the pH of the substances: Acids are 0-6.9 whereas alkalis are 8-14.Reduction and oxidation (redox): reaction: acids are generally proton donors or electron pair recipient whereas a base is a proton recipient or electron pair donors.Which of the following chemical reactions will produce a precipitate?
Answer:
C
Explanation:
The chemical change between zinc chloride and magnesium sulfate will produce a precipitate.
What are chemical changes?
Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical changes ,here:
https://brainly.com/question/23693316
#SPJ3
Which is more dense, carbon dioxide or air
Answer:carbon dioxide
Explanation:
Carbon dioxide has a higher density then most of the gases found in air
Answer:
Carbon dioxide, also known by the chemical formula CO2, has a higher density than the other gases found in air, which makes CO2 heavier than the air. Air is composed of approximately 78 percent nitrogen, 21 percent oxygen, and less than 1 percent of other gases.
Explanation
Carbon dioxide is an odorless, slightly toxic and colorless gas that possesses an acidic and pungent taste. CO2 is a vital but small component of air. CO2 is a vital aspect of life as we know it mainly because it is a vital component of the photosynthesis process required for plants to produce food.
The average concentration of CO2 in the atmosphere is about 404 ppm. It should also be noted that the CO2 content in the atmosphere tends to fall and rise in a regular pattern of 6 ppmv. Also, the CO2 concentration in the air has witnessed a steady increase for about 7 decades. As it stands, the current increase is 2.5ppm each year. The big question on the minds of many however is “Is carbon dioxide heavier than air?”
Carbon dioxide with the chemical formula of CO2 possesses a higher density of the gases found within the air. Air is made up of about 78% nitrogen which weighs about 32 gram per mole as well as 0.9 % argon which weighs about 39 g/mol. The carbon dioxide, on the other hand, has two oxygen atoms and a carbon atom. This is in addition to possessing a molecular weight of about 44 g/mol. It, therefore, suffices to say that carbon dioxide is heavier or of a higher density than air.
What Is The Ratio Of Carbon Dioxide To Air?
Carbon dioxide is about 1.5 times the weight of air which makes it heavier. Hence, if it gets released to the atmosphere it will lead to concentration at low elevations. Furthermore, CO2 will turn to ice at a temperature of -78.5 degrees Celsius. CO2 is generally available in high-pressure cylinder gasses or the form of dry ice. They are also used industrially to make rubber, fertilizers, and plastics.
What condition of the gas remains constant?
Answer:
The temperature remains constant because the internal energy only depends on temperature in that case
-Hops
formula of acetic acid & sodium acetate
Answer:
(CH3COOH + CH3COONa)this is the answer
Acetic acid CH3COH and Sodium Acetate CH₃CO₂Na both ionize in water. This leads to a shift of equilibrium to the left when sodium acetate is added to acetic acid. The concentrations can be computed.
Explanation:The formula for acetic acid is CH3COH, and the formula for Sodium Acetate is CH₃CO₂Na. When Sodium Acetate CH₃CO₂Na is dissolved in water, it ionizes into Na+ and CH₃CO₂- ions. This process results in a basic solution as CH₃CO₂- is a weak base anion. By Le Chatelier's principle, when sodium acetate is added to a solution of acetic acid, the equilibrium shifts to the left, consuming some CH₃COO and H+ ions initially present in the solution.
The amount of acetic acid and sodium acetate in a solution can be calculated using the concentrations given. For instance, if 1.0 × 10-2 mol CH3COH is present and 0.01 × 10-2 mol is neutralized, there would be 0.99 × 10-2 mol CH3COH remaining. If the initially present acetate also gives a final concentration of 1.01 × 10-2 mol NaCH3CO₂, compute molar concentrations using the given volumes.
Learn more about Acetic Acid and Sodium Acetate Formulas here:https://brainly.com/question/33295025
#SPJ12
how many moles are there of a 7m solution with a volume of 14.44 liters
Answer:
The answer to your question is 101.08 moles
Explanation:
Data
number of moles = ?
concentration = 7 M
volume = 14.44 l
Process
1.- Write the Molarity formula
Molarity = moles / volume
2.- Solve for moles
moles = Molarity x volume
3.- Substitution
moles = 7 x 14.44
4.- Result
moles = 101.08
How many nonbonding electron pairs are there in the lewis structure of the peroxide ion
Answer:
There are 6 non bonding pair of electrons present in Lewis structure of peroxide ion.
Explanation:
Ionic formula of peroxide ion is [tex]O_{2}^{2-}[/tex]
Total number of valence electron present in peroxide ion is 14 (12 electrons come from two oxygen atoms and another 2 electrons come from negative charges).
After fulfilling octet rule, Lewis structure of peroxide shows that each oxygen atom contains three non bonding electron pairs and a covalent bond.
Hence there are 6 non bonding pair of electrons present in Lewis structure of peroxide ion.
Lewis structure has been given below.
a) What is the maximum number of grams of nickel bromide that can be produced from the reaction of 67.8 g of nickel with 37.3 g of bromine?
b) Which reactant is in excess and what mass of this reactant is left over?
______ Ni + _______ Br2 _______ NiBr2
Answer:
The answer to your question is a) 51.07 g of NiBr₂ b) Nickel, 54 g
Explanation:
Data
mass of NiBr₂ = ?
mass if Ni = 67.8 g
mass of Br = 37.3 g
Balanced chemical reaction
Ni + Br₂ ⇒ NiBr₂
Process
1.- Find the atomic mass of the reactants and the molar mass of the product
Ni = 59 g
Br = 79.9 x 2 = 159.8 g
NiBr₂ = 59 + 159.8 = 218.8 g
2.- Find the limiting reactant
theoretical yield Ni/Br₂ = 59/159.8 = 0.369
experimental yield Ni/Br₂ = 67.8/37.3 = 1.81
The limiting reactant is Bromine because the experimental yield was lower than the theoretical yield.
3.- Calculate the mass of NiBr₂
159.8 g of Br₂ --------------- 218.8 g of NiBr₂
37.3 g of Br₂ -------------- x
x = (37.3 x 218.8) / 159.8
x = 8161.24/159.8
x = 51.07 g of NiBr₂
4.- Find the excess reactant
The excess reactant is Nickel
59 g of Ni ---------------- 159.8 g of Br₂
x ---------------- 37.3 g of Br₂
x = (37.3 x 59)/159.8
x = 2200.7/159.8
x = 13.77 g of Ni
Excess Ni = 67.8 - 13.77
= 54 g
Final answer:
The maximum number of grams of nickel bromide that can be produced is 50.911 grams. Bromine is the limiting reactant, and there will be 54.124 grams of excess nickel left over after the reaction.
Explanation:
To determine the maximum number of grams of nickel bromide (NiBr₂) that can be produced from 67.8 g of nickel (Ni) and 37.3 g of bromine (Br₂), we first need to write the balanced chemical equation: Ni + Br₂ → NiBr₂
Next, we calculate the molar mass of nickel (Ni) as approximately 58.69 g/mol and bromine (Br₂) as approximately 159.808 g/mol. Using these values, we convert the given masses of nickel and bromine to moles.
67.8 g Ni × (1 mol Ni / 58.69 g Ni) = 1.155 moles Ni
37.3 g Br₂ × (1 mol Br₂ / 159.808 g Br₂) = 0.233 moles Br₂
The balanced equation shows a 1:1 molar ratio between Ni and Br₂; therefore, the limiting reactant is the one with fewer moles. In this case, Br₂ is the limiting reactant since 0.233 moles Br₂ is less than 1.155 moles Ni. To calculate the maximum mass of NiBr₂ produced, we use the molar mass of NiBr₂ (approximately 218.498 g/mol):
0.233 moles Br₂ × (1 mol NiBr₂ / 1 mol Br₂) × (218.498 g NiBr₂ / 1 mol NiBr₂) = 50.911 grams NiBr₂
Nickel is in excess, and to find the excess mass, we calculate how much Ni is used to react with all the Br₂:
0.233 moles Br₂ × (1 mol Ni / 1 mol Br₂) × (58.69 g Ni / 1 mol Ni) = 13.676 grams Ni used
Subtracting the amount of Ni used from the original mass gives us the excess mass of Ni:
67.8 g Ni - 13.676 g Ni used = 54.124 grams Ni left over
The functional unit of the kidney is the ______
Answer:
The nephron
Explanation:
is responsible for removing waste from the body.
Immediately after the golf ball is hit by the putter, the ball has 12 joules of mechanical energy. Seconds later, after the ball has rolled several meters through the grass, its mechanical energy has dropped to 4 joules due to friction with the grass and air.
The amount of mechanical energy lost by the golf ball is _______ the amount of heat energy gained by the ball, grass, and air molecules due to friction.
A.
equal to
B.
less than
C.
greater than
D.
unrelated to
Answer:A equal to
Explanation:
Final answer:
The mechanical energy lost by the golf ball is equal to the heat energy gained by the ball, grass, and air due to the law of conservation of energy.
Explanation:
The amount of mechanical energy lost by the golf ball is equal to the amount of heat energy gained by the ball, grass, and air molecules due to friction. According to the law of conservation of energy, energy cannot be created or destroyed, only transferred from one form to another. In this situation, the 12 joules of mechanical energy initially present in the golf ball is reduced to 4 joules after some time. The difference, which is 8 joules, is the amount of energy that has been transformed into heat due to the forces of friction acting on the ball by the grass and air.
An isotope has the same number of______but a different number of____than other atoms of the same element. :)
Answer:
an isotope has the same number of protons but a different number of neutrons than the other atoms of the same element.
An isotope has the same number of protons but a different number of neutrons than other atoms of the same element.
What is an isotope?An isotope is one of two or more forms or types of the same or identical chemical element of the periodic table depending on the number of electrons of the element. Some of them become radioactive too if we isolate the proton from the nucleus.
The different isotopes of an element are the same in the number of protons in the nucleus of an atom giving them the identical atomic number, but a different number of neutrons of the element of the isotope contains a different atomic weight.
Therefore, the isotope has the same number of protons but a different number of neutrons than other atoms of the same element.
Learn more about isotopes, here:
https://brainly.com/question/13662697
#SPJ2
LU
Calculating Kinetic Energy
A conveyer belt moves a 40 kg box at a velocity of 2 m/s. What is the kinetic energy of the box while it is on the
conveyor belt?
40J
803
160J
1,600
Answer:
80joules
Explanation:
1/2mv²
1/2x40x2²
1/2x40x4
1/2x160
=80joules
what is the purpose of cell wall
Answer:
The purpose of the cell wall is to provide structure
Explanation:
Which of the following can be altered by the heat island effect?
A.
the ocean tides
B.
the movement of crustal plates
C.
local weather patterns
D.
local volcanic activity
Answer:
C.
Explanation:
The heat island effect or the the urban heat island effect, is where the temperature of an area is higher than close rural areas. This is because materials suh and concrete and asphalt absorb the sunlight and store it, causing extreme weather.
The heat island effect, a phenomenon causing urban regions to be warmer than rural areas, can mainly influence local weather patterns. It does not directly affect ocean tides, crustal plate movements, or local volcanic activity.
Explanation:The heat island effect is a phenomenon that causes urban regions to be significantly warmer than their surrounding rural areas. This is primarily due to human activities and the extensive use of concrete and asphalt, which absorb solar radiation and re-radiate it as heat. The phenomenon can mainly affect local weather patterns, particularly increasing temperature and altering precipitation.
Therefore, among the given choices, the heat island effect can influence the local weather patterns (Option C). The heat island effect has no direct influence on ocean tides, movement of crustal plates, or local volcanic activity. Those are controlled by other natural forces and processes such as the moon's gravitational pull for tides and tectonic activity for crustal movements and volcanic activity.
Learn more about Heat Island Effect here:https://brainly.com/question/38949212
#SPJ3
Calcium phosphate will precipitate out of blood plasma when calcium concentration in blood is 9.2mg/dL, and Ksp for calcium diphosphate is 8.64x10^(-13), what minimum concentration of diphospate results in precipitation?
Answer:
1.6 ×[tex]10^{-7}[/tex]M
Explanation:
[tex]K_{sp}[/tex] for calcium diphosphate is 8.64x10^(-13)
concentration of the calcium cations = 2.2955 x 10^−3M
[tex]Ca_{2}P_{2} O_{7}_(s)[/tex] ⇄[tex]2Ca_{2}_(aq)[/tex] + [tex]P_{2}O^{4-} _{7}_(aq)[/tex]
[tex]K_{sp}[/tex] = [tex][Ca^{2+}]^{2}[/tex]×[tex][P_{2} O^{4-}_7][/tex]
converting the concentration of the calcium cations from 9.2mg/dL to moles per liter , we get 2.2955 x [tex]10^{-3}[/tex]M
[tex][P_{2} O^{4-}_7][/tex] = [tex]\frac{K_{sp} }{[Ca^{2+}]^{2} }[/tex]
[tex][P_{2} O^{4-}_7][/tex] = [tex]\frac{8.64 . 10^{-13} }{[2.2955 . 10^{-3}]^{2} }[/tex]
=1.6 ×[tex]10^{-7}[/tex]M
In a thermonuclear device, the pressure of 0.050 liters(V1) of gas within the bomb casing reaches a pressure of 4.0 x 106 atm (P1). When the bomb casing is destroyed by the explosion, the gas is released into the atmosphere where it reaches a pressure of 1.00 atm (P2). What is the volume ( V2) of the gas after the explosion
Answer:
See explanation below
Explanation:
In this case, we can assume that the temperature is the same in both conditions. Let's assume that the temperature is 25 °C.
If the temperature is constant we can use the Boyle's law to calculate the volume. This law is:
P₁V₁ = P₂V₂
You should note that this expression is only valid when you have a constant temperature.
Solving for V₂:
V₂ = P₁V₁ / P₂
So all we have to do is replace the given values:
V₂ = 0.05 * 4x10⁶ / 1
V₂ = 200,000 L
Using the combined gas law and assuming temperature remains constant, the gas's volume after the explosion would be 200,000 liters.
This is a classic ideal gas law problem, which can be solved using the combined gas law formula that relates pressure, volume, and temperature. Since the temperature is not mentioned, we can assume it is constant, and so we use the equation that omits temperature which is P₁V₁ = P₂V₂. We can rearrange this to solve for V₂:
V₂ = (P₁ x V₁) / P₂
Plugging in the values we get:
V₂ = (4.0 x 10⁶ atm x 0.050 L) / 1.00 atm
V₂ = 200,000 L
The gas will have a volume of 200,000 liters after the explosion, assuming temperature remains constant and the gas behaves ideally.
Many roller coasters today have loops, either as stand-alone loops or as parts of corkscrews. In stand-alone loops, the loops are teardrop-shaped and not one complete circle. Write a brief essay as to why you think they are constructed that way. Be sure to draw on your experience and observations in this virtual lab.
Teardrop-shaped loops on modern roller coasters ensure a smoother ride by providing a gradual increase and decrease in centripetal acceleration, maintaining security in the rider's seat without the need for seat belts. The shape also prevents sudden jolts that would occur with a circular loop, enhancing overall ride comfort and safety.
Explanation:The design of modern roller coasters often incorporates teardrop-shaped loops rather than circular ones to enhance the comfort and safety of the ride. The reason for this specific shape is that the radius of curvature gradually decreases as the coaster ascends the loop, reaching a minimum at the top. This reduces the jarring centripetal acceleration changes that would be experienced with circular loops, leading to a smoother ride.
This gradual increase in centripetal acceleration to a maximum at the top and then a decrease makes the experience more enjoyable by avoiding abrupt changes in forces. By having a smaller radius of curvature at the top, the acceleration can be easily maintained above the acceleration due to gravity, known symbolically as 'g.' This ensures that passengers remain securely in their seats throughout the loop without the need for additional restraints like seat belts.
Modern roller coaster engineering uses these principles, which have been known since the days of early railroad design, to create thrilling yet safe rides. By manipulating the forces and energy transitions in the coaster's path, engineers can predict exactly how the roller coaster will behave, keeping the ride both exciting and secure for all riders.
A student was given two clear liquids; a colorless liquid and a dark-blue liquid. The student was asked to combine the liquids in a beaker and record observations. Which of the following results, if true, would provide the best evidence that a chemical change took place when the liquids were combined?
a) The resulting mixture was cloudy.
b) The total volume of the mixture was equal to the sum of the initial volumes.
c) The resulting liquid was light blue.
d) The liquids formed two separate layers in the beaker.
Answer:
The correct option is;
a) The resulting mixture was cloudy
Explanation:
Here we have the initial color as
1. Colorless and
2. Dark blue
We analyze each of the results as follows
a) The resulting mixture was cloudy
A cloudy mixture forming when the two liquids are mixed is most likely due to the formation of a suspension from a new substance That is a new compound is formed
b) The total volume of the mixture was equal to the sum of the initial volumes.
Here since there is no change in the physical properties as the volume of the mixture is the sum of the volumes of the constituent then there is unlikely to be a chemical change
c) The resulting liquid was light blue
Here, the observation is more of a physical change
d) The liquids formed two separate layers in the beaker.
This is an indication that there was no mixing of the liquids hence no reaction or chemical change.
Final answer:
The best evidence of a chemical change after mixing two liquids, based on the given options, is c) The resulting liquid was light blue, indicating that a new substance with a different color has been formed.
Explanation:
The question pertains to determining whether a chemical change has occurred upon mixing two liquids. Observations that typically indicate a chemical change include unexpected color changes, formation of a precipitate, temperature changes, light emission, bubbles (especially if the substance is not boiling), and different smells. In the context of the given choices, the best evidence of a chemical change is c) The resulting liquid was light blue.
Choice a) could simply be due to the scattering of light and does not necessarily indicate a chemical change. Choice b) is characteristic of a physical change where volumes are additive and no new substances are formed. Choice d) suggests immiscibility rather than a chemical reaction. However, choice c) suggests that a new substance with a different color has been formed, which is a strong indicator of a chemical reaction. A direct combination of a colorless and a dark-blue liquid would not result in a light-blue liquid unless there was a change in composition, which leads us to conclude that a chemical change has taken place.
A chemical reaction was used to produce 2.54 moles of copper(II) bicarbonate, Cu(HCO3)2. What mass of copper(II) bicarbonate was produced?
The mass of copper(II) bicarbonate (Cu(HCO3)2) produced in the chemical reaction, if the yield is 2.54 moles, is approximately 563.3 grams.
Explanation:To find the mass of copper(II) bicarbonate, we need to use the molar mass of copper(II) bicarbonate, which can be found by adding the molar masses of each constituent atom. Copper(II) bicarbonate, Cu(HCO3)2, has a molar mass of 221.6 grams/mole.
Knowing we've produced 2.54 moles, we can multiply this by the molar mass:
2.54 moles * 221.6 grams/mole = 563.3 grams.
Therefore, the mass of copper(II) bicarbonate produced is approximately 563.3 grams. This calculation is based on the principle of stoichiometry, which deals with the quantifiable relationship of reactants and products in a chemical reaction.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ3
What type of reaction is shown below?
Ca + 2H2O - Ca(OH)2 + H2
Answer:
Single Replacement
Explanation:
Edge 22
Why is the air in a jet aircraft flying at high altitudes pressurized? *
Answer:
Aircraft cabins are therefore pressurized to maintained a similar pressure as that experienced at sea level to ensure normal breathing of passengers.
Explanation:
-Air becomes increasingly thinner with increasing altitudes.
-As such, oxygen becomes limited at higher altitudes and makes it difficult or almost impossible to breath a condition called hypoxia.
-Aircraft cabins are therefore pressurized to maintained a similar pressure as that experienced at sea level to ensure normal breathing of passengers.
describe how rotation and day are related.
Explanation:
As the earth rotates from west to east. So the eastern hemisphere receives the sunlight faster than the western hemisphere and when as the earth rotates on its axis time also keeps on changing from Eastern to western hemisphere. As when there will be day in eastern hemisphere the western hemisphere will have night there. and as the earth rotates it affects the day . so in this way they are related.
I gave my own answers according to my view hope you like it and hope it helps you.
Compound a reacts with one equivalent of h2 in the presence of a catalyst to give methylcyclohexane. Compound a can be formed upon treatment of 1-bromo-1-methylcyclohexane with sodium methoxide. What is the structure of compound a?
Answer:
The compound a is 1-methyl cyclohexene (see attachment for structure).
Explanation:
The reaction of 1-Bromo-1-methylcyclohexane with sodium methoxide is a second-order reaction since the methoxide ion is a strong base and also a strong nucleophile. This ion attacks the alkyl halide faster than the alkyl halide can ionize to produce a first-order reaction. However, we can not see the product of nucleophilic substitution. The SN₂ mechanism is blocked due to the impediment of the 1-Bromo-1-methylcyclohexane. The main product, according to the Zaitsev rule, is the 1-methyl cyclohexene, thus forming a double bond.
Then, this cyclohexene is hydrogenated to form the cyclohexane.
Final answer:
Compound A is formed when 1-bromo-1-methylcyclohexane is treated with sodium methoxide. The structure of compound A is methylcyclohexane with a methoxy group attached to one of the carbon atoms.
Explanation:
The structure of compound A can be determined by considering the reactions and information given in the question. Compound A is formed when 1-bromo-1-methylcyclohexane is treated with sodium methoxide. This reaction suggests that the bromine atom in 1-bromo-1-methylcyclohexane is replaced by a methoxy group (-OCH3) to form compound A. Therefore, the structure of compound A is methylcyclohexane with a methoxy group attached to one of the carbon atoms.
Rodrigo wanted a way to cool a bottled drink without ice or refrigeration. He decided to use a chemical that cools as it dissolves in water. The chemical is poisonous, so he can't dissolve it directly in the drink. Instead, he designed the device shown below. Label the types of materials used in the design.
Answer:it may be made up of glass or porecelein ...material or material that should note react with the chemical
Explanation:
Answer:i have the answer is in the image :/
Explanation:
Pure water is actually a mixture of water molecules,hydronium ions,and hydroxide ions:
A.How does the concentration of hydroxide ions compare to the concentration of hydronium ions in pure water?Explain
B.How does the concentration of ions compare to the concentration of molecules in pure water?
Answer:
A. They are equal.
B. The ratio of ions to molecules is 1 to 2.78× 10⁸.
Explanation:
A. Concentration of ions
In pure water, [H₃O⁺] = [OH⁻] = 1.00 × 10⁻⁷ mol·L⁻¹.
The concentration of hydroxide ions equals that of hydronium ions.
B. Ratio of ions to molecules
Assume you have 1 L of pure water.
[tex]\text{Moles of water} = \text{1000 g} \times \dfrac{\text{1 mol}}{\text{18.02 g}} = \text{55.49 mol}[/tex]
You have 1.00× 10⁻⁷ mol·L⁻¹ [H₃O⁺] and 1.00× 10⁻⁷ mol·L⁻¹ [OH⁻], so you have 2,00 mol·L⁻¹ of ions.
The ratio of concentrations is
[tex]\dfrac{\text{[Ions]}}{\text{[Molecules]}} = \dfrac{2.00 \times 10^{-7}}{55.49} = \dfrac{ 3.60 \times 10^{-5}}{1} = \mathbf{\dfrac{1}{2.78 \times 10^{8}}}[/tex]