Answer: The number of moles of sodium phosphate required is 0.33 moles
Explanation:
We are given:
Moles of silver nitrate = 1 mole
The chemical equation for the reaction of sodium phosphate and silver nitrate follows:
[tex]Na_3PO_4+3AgNO_3\rightarrow 3NaNO_3+Ag_3PO_4[/tex]
By Stoichiometry of the reaction:
3 moles of silver nitrate reacts with 1 mole of sodium phosphate.
So, 1.0 moles of silver nitrate will react with = [tex]\frac{1}{3}\times 1.0=0.33mol[/tex] of sodium phosphate.
Hence, the number of moles of sodium phosphate required is 0.33 moles
Rust is formed by the interaction of iron and oxygen. When rust formed on an iron nail with a mass of 100g,the mass of the rusted nail was 143g. What mass of oxygen gas most likely reacted with the iron nail?
Final answer:
The mass of oxygen gas that reacted with the iron nail to form rust was 43 grams, which is the difference between the original mass of the iron nail (100g) and the mass after rusting (143g).
Explanation:
The mass of oxygen gas that most likely reacted with the iron nail to produce rust can be calculated by finding the difference in mass before and after the rusting process. Initially, the mass of the iron nail was 100g, and after rust formation, the mass increased to 143g. The increase in mass is due to the oxygen from the air reacting with the iron to form rust, which consists of hydrated iron(III) oxide.
Therefore, the mass of the oxygen that reacted with the iron nail can be calculated as follows:
Mass of rusted nail - Original mass of iron nail = Mass of oxygen
143g - 100g = 43g
Thus, 43 grams of oxygen reacted with the iron nail to form rust.
How many moles are in 1.50 g of ethylamine, ch3ch2nh2?
Answer: 0.03 moles
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\textMolar mass}}[/tex] ....(1)
For ethyl amine [tex]CH_3CH_2NH_2[/tex]
Mass of ethyl amine [tex]CH_3CH_2NH_2[/tex]= 1.50 g
Molar mass of ethyl amine [tex]CH_3CH_2NH_2[/tex]= 45 g/mol
Putting values in above equation, we get:
[tex]\text{Moles of ethyl amine}=\frac{1.50g}{45g/mol}=0.03moles[/tex]
What is the empirical formula of an unknown compound that contain 60.3% of magnesium and 39.7% of Oxygen?
Answer:
MgO
Explanation:
Mass of Mg = 60.3 g
Molar mass of Mg = 24.305 g/mol
Moles of Mg = 60.3 g/ 24.305 g/mol = 2.48 mol
Mass of O = 39.7g
Molar mass of O = 16 g/mol
Moles of O = 39.7g/ 16 g/mol = 2.48 mol
So the molar ration of Mg:O is 1:1
Therefore the empirical formula is MgO
An experiment carries out the reaction a → products at three different initial concentrations of a and the initial reaction rate were measured, as indicated in the table. [a](m) initial rate (m/s) 0.15 0.010 0.30 0.040 0.45 0.090 based on this data, what is the rate law for the reaction? view available hint(s) an experiment carries out the reaction at three different initial concentrations of and the initial reaction rate were measured, as indicated in the table. initial rate 0.15 0.010 0.30 0.040 0.45 0.090 based on this data, what is the rate law for the reaction? rate = k[a]2 rate = k[a]3 rate = k[a] rate = k
If a temperature increase from 10.0 ∘C to 21.0 ∘C doubles the rate constant for a reaction, what is the value of the activation barrier for the reaction
Give the formula for the conjugate base of the strong acid hclo4 (perchloric acid).
The formula for the conjugate base of the strong acid HClO₄ (perchloric acid) is ClO4⁻.
The conjugate base of an acid is formed when the acid donates a proton (H+) to a base. In the case of perchloric acid (HClO₄), the conjugate base is derived by removing the acidic hydrogen ion (H+) from the acid.
The formula for the conjugate base of HClO₄, known as perchlorate ion, is ClO₄-. The perchlorate ion has a negative charge (-1) due to the loss of the hydrogen ion from the acid.
The perchlorate ion is the conjugate base of perchloric acid. Its chemical formula is ClO4-. The perchlorate ion consists of one chlorine atom (Cl) bonded to four oxygen atoms (O) in a tetrahedral arrangement.
To learn more about the conjugate base, follow the link:
https://brainly.com/question/30086613
#SPJ6
Write the chemical equation for the reaction of propylamine, c3h7nh2 with water. (include all phases in your answer)
Answer is:
CH₃-CH₂-CH₂-NH₂ + H₂O(l) ⇄ CH₃-CH₂-CH₂-NH₃⁺(aq) + OH⁻(aq).
Amine group (-NH₂) has neutral charge, bet when accepts one
proton (H⁺) has positive
charge.
Amines are compounds that contain a basic nitrogen atom with a lone pair of electrons. Amines are derivatives of ammonia, where is one or more hydrogen atoms replaced by a substituent such as an alkyl or aryl group (in this compound propyl group).
Propylamine accepts a proton from water according to the reaction equation; C3H7NH2(aq) + H2O(l) ------> C3H7NH3^+(aq) + OH^-
Propylamine is a base because it accepts a proton. Recall that according to Brownstead - Lowry, a base is any substance that accepts a proton while an acid is any substance that donates a proton. Propylamine accepts a proton because of the lone pair on nitrogen atom.
The reaction of propylamine with water is an acid base reaction because propylamine accepts a proton from water as follows;
C3H7NH2(aq) + H2O(l) ------> C3H7NH3^+(aq) + OH^-
Learn more: https://brainly.com/question/5803619
Looking across period 4 of the periodic table, potassium (atomic number 19) is followed by calcium (atomic number 20), which is followed by scandium (atomic number 21). Which element should have the largest atomic radius? A) potassium B)calcium C)scandium D)All three have the same atomic radius.
According to trends in the periodic table, the atomic radius decreases from left to right across a period. Therefore, potassium, being furthest to the left, would have the largest atomic radius followed by calcium and then scandium.
Explanation:The subject of this question is the atomic radius of elements on the periodic table, specifically potassium, calcium, and scandium. The atomic radius generally decreases as you go from left to right across a period in the periodic table due to the increasing positive charge of the nucleus (i.e., the increasing atomic number), which draws the electrons closer to the nucleus, thereby decreasing the atomic radius.
In the case of potassium (atomic number 19), calcium (atomic number 20), and scandium (atomic number 21)
, potassium should have the largest atomic radius, followed by calcium, and then scandium with the smallest atomic radius.
Learn more about Atomic Radius here:https://brainly.com/question/32036952
HELP ME PLZ ITS REALLY IMPORTANT! PLEASE TRY TO DO ALL!!
The reaction of hydrogen peroxide with iodine, h2o2(aq)+i2(aq)⇌oh−(aq)+hio(aq) is first order in h2o2 and first order in i2. if the concentration of h2o2 was increased by half and the concentration of i2 was quadrupled, by what factor would the reaction rate increase?
The reaction rate for H₂O₂(aq) + I₂(aq) ⇌ OH⁻(aq) + HIO(aq) increases by a factor of 6 when the concentration of H₂O₂ is increased by half and the concentration of I₂ is quadrupled.
The rate of a reaction is influenced by the concentrations of the reactants. For the reaction H₂O₂(aq) + I₂(aq) ⇌ OH⁻(aq) + HIO(aq), the rate law is given by: Rate = k[H₂O₂][I₂]
This indicates that the reaction is first order with respect to both H₂O₂ and I₂.
Step-by-Step Explanation:
Initial Reaction Rate: The initial rate can be expressed as Rate_initial = k[H₂O₂]₀[I₂]₀.Change in Concentrations: The concentration of H₂O₂ is increased by half (1.5 times) and the concentration of I₂ is quadrupled (4 times).New Rate Calculation: The new rate can be expressed as Rate_new = k(1.5[H₂O₂]₀)(4[I₂]₀).Rate Increase Factor: To determine by what factor the rate increases, divide the new rate by the initial rate:Rate increase factor = (k(1.5[H₂O₂]₀)(4[I₂]₀)) / (k[H₂O₂]₀[I₂]₀) = 1.5 * 4 = 6.
Therefore, the reaction rate increases by a factor of 6.
The sticky top of the pistil that collects the pollen (sperm) is the _______. ovary
style
stigma
anther
Calculate the empirical formula for each natural flavor based on its elemental mass percent composition.
a. methyl butyrate (component of apple taste and smell): c 58.80%, h 9.87%, o 31.33%
what the difference between chemical formula and molecule
What is the formula for copper(ii) phosphate? capitalization and punctuation count!?
a trapeze artist misses the trapeze and falls into the net 9.2 meters below, how long will it take him to fall?
By using the formula of free fall equation:
[tex]s = \frac{1}{2}gt^{2}[/tex]
where,
[tex]s[/tex] is height
[tex]g[/tex] is acceleration due to gravity = [tex]9.8 ms_2[/tex]
[tex]t[/tex] is time
[tex]s = 9.2 m[/tex] (given)
Substituting the values in the above equation:
[tex]9.2 m = \frac{1}{2}9.8 ms^{2} \times t^{2}[/tex]
[tex]t^2 = 1.877[/tex]
[tex]t = \sqrt{1.877 s^{2}}[/tex]
[tex]t = 1.37 s[/tex]
Hence, trapeze will take [tex]t = 1.37 s[/tex] to fall.
Which statement is true about ionic compounds? Solid ionic compounds are good conductors of electricity. Ionic compounds have varying solubilities in water. Ionic compounds have very low melting points. Ionic compounds are very easy to bend.
The statement which is true about ionic compounds is: B. Ionic compounds have varying solubilities in water.
An ionic compound can be defined as a crystalline solid (chemical compound) that contains neatly packed and oppositely charged ions, which are typically bonded through electrostatic forces.
In Chemistry, some examples of ionic compounds are:
Sodium chloride.Sodium oxide.Lithium chloride.Aluminum chloride.Potassium bromide.Solubility refers to a measure of how readily a substance or chemical compound dissolves in a solvent to produce (form) a solution.
Hence, a substance or chemical compound is generally considered to be soluble if it is able it dissolve completely in a solvent.
Basically, the solubilities of ionic compounds in water tends to vary because of the difference existing between its hydration energy and its lattice energy.
Read more: https://brainly.com/question/13750908
In which direction does the reaction proceed after heating to 2000 °c?
N2(g) + 3h2(g) ⇌ 2nh3(g) the equilibrium constant kc at 375°c is 1.2. starting with [h2]0 = 0.76 m, [n2]0 = 0.60 m and [nh3]0 = 0.48 m, which concentration(s), if any, will have increased when the mixture comes to equilibrium?
To determine which concentration(s) will have increased when the mixture reaches equilibrium, we can compare the reaction quotient (Qc) to the equilibrium constant (Kc):
N2(g) + 3 H2(g) = 2NH3(g)
Qc = (NH3^2) / { (N2)(H)^3)}
Qc= 0.48^2 /{ ( 0.60) (0.760^3) }= 0.875
Qc < Kc therefore the equilibrium will shift to the right. This implies that Nh3 concentration will increase
Calculate Qc using the initial concentrations and the balanced chemical equation.
Compare Qc to Kc:
If Qc < Kc, the reaction will proceed to the right (towards products) to reach equilibrium.
If Qc > Kc, the reaction will proceed to the left (towards reactants) to reach equilibrium.
In this case, if Qc is less than Kc, it indicates that the concentrations of products ([NH₃]) will increase, and the concentrations of reactants ([N₂] and [H₂]) will decrease when the mixture reaches equilibrium.
To learn more about reactants, click here.
https://brainly.com/question/21126365
#SPJ3
if f(x)= 5x^3 -2 and g(x) =2x+1, find (f+g)(x)
a. 10x^3 -2
b. 3x^3 -1
c. 5x^3+2x-1
d. 3x^2 -1
dna is made up of repeating units called _?
DNA is made of repeating units known as nucleotides, including a pentose sugar, a nitrogenous base, and phosphoric acid, forming a double helix structure.
Explanation:DNA, or deoxyribonucleic acid, is composed of repeating units called nucleotides. Each nucleotide consists of a pentose sugar (a sugar with five carbon atoms), a nitrogenous base (a base containing nitrogen atoms), and phosphoric acid (H3PO4). The typical DNA of a mammalian cell contains about 3 × 10⁹ nucleotides. Nucleotides work together to form nucleic acids that are essential for directing cellular activities such as cell division and protein synthesis. The DNA structure is like a double helix, where two polymers of nucleotides are coiled around each other. The sugar-phosphate combination forms the backbone of the structure, with nitrogenous bases in the interior, held together by hydrogen bonds.
Learn more about Nucleotides here:https://brainly.com/question/16308848
#SPJ12
(r)-2-butanol reacts with phosphorus tribromide to give a (c4h9br). treatment of a with sodium cyanide in dmf gives b (c5h9)n. b is optically active. draw the structure of
b.
The structure of B is
H
|
H3C - C ≡ N
|
H
The reaction of (R)-2-butanol with phosphorus tribromide (PBr3) undergoes substitution reaction, replacing the hydroxyl group with a bromine atom, resulting in compound A, which is 2-bromobutane (C4H9Br).
Compound A is then treated with sodium cyanide (NaCN) in dimethylformamide (DMF), undergoing a nucleophilic substitution reaction. The cyanide ion replaces the bromine atom, forming compound B, which is 2-butyne nitrile (C5H9N).
Compound B is optically active due to the presence of the chirality at the carbon atom adjacent to the nitrile group. The carbon atom bonded to the nitrogen and the two methyl groups creates a chiral center, resulting in optical activity.
The specific rotation of B would depend on the configuration of the chiral carbon.
Complete Question:
(R)-2-butanol reacts with phosphorus tribromide to give A (C_4H_9Br). Treatment of A with sodium cyanide in DMF gives B (C_5H_9) N. B is optically active. Draw the structure of B.
: calculate the mass of the solute in 1.500 l of 0.30 m glucose, c6h12o6, used for intravenous injection
it is winter where Jenna lives. It’s been snowing all day, but now the snow has changed to sleet and then to freezing rain. What is happening to cause these changes? In your answer, explain how snow, sleet, and freezing rain form
The snow or snowflakes are formed when water vapor, which is present in a cloud transforms directly into the crystals of ice. The formation of sleet takes place when rain droplets fall via a layer of air below the zero degree Celsius, resulting in the droplets to freeze into solid ice as they fall. Freezing rain refers to just the usual droplets of rain, which falls as a liquid but freeze once they land on a cold surface.
Answer:
The temperature increases.
Explanation:
Hello,
In this case, a change in the temperature is being observed as long as initially, it is stated that the snow is present as itself but for some reason it becomes sleet and finally freezing rain. Such stepwise change is caused by the slight increase of the temperature which induces the change from the solid frozen water (snow) to freezing liquid water (freezing rain). Thus, since the water molecules receive energy, due to the aforesaid increase in the temperature, they are allowed slightly change from solid to liquid.
Best regards.
Is a ph = 7.25 solution acidic, basic, or neutral at 0 °c?
Final answer:
At 0 °C, a solution with a pH of 7.25 is considered basic since the neutrality point at this temperature is approximately pH 6.31.
Explanation:
The pH of a solution at 0 °C that reads 7.25 would actually be basic. This is because the neutrality point of pH at 0 °C is not exactly 7 but approximately 6.31. At this temperature, a solution is considered neutral at pH 6.31, acidic if the pH is less than 6.31, and basic if the pH is greater than 6.31. Given that a pH of 7.25 is more than 6.31, the solution at 0 °C would be classified as basic.
Estimate the concentration of carbon monoxide at the downwind edge of a city
Zinc metal reacts with hydrochloric acid to produce hydrogen gas and an aqueous solution of zinc(ii) chloride. what is the reducing agent in this reaction? maybe prof. umbridge was right in trying to remove her.
The reducing agent in the reaction between zinc metal and hydrochloric acid is zinc metal.
Explanation:The reducing agent in the reaction between zinc metal and hydrochloric acid is zinc metal.
In this reaction, zinc is oxidized and loses electrons to form zinc ions (Zn²+). The hydrogen ions (H+) in the hydrochloric acid are reduced and gain electrons to form hydrogen gas (H₂). Therefore, the zinc metal is the reducing agent because it causes the reduction of the hydrogen ions.
Describe how you would prepare a supersaturated solution.
Answer:
To prepare a supersaturated solution, the added amount must be higher than the solubility for the given volume of solvent
Explanation:
Hello,
This could be answered by knowing that all the solutes have a property called solubility which accounts for the maximum amount of it that can be thoroughly dissolved into a specific solvent. Thus, to prepare a supersaturated solution, the added amount must be higher than the solubility for the given volume of solvent at a specific temperature. For example, at 20°C, 45.8g of aluminium chloride are completely dissolved into 100 mL of water, so at that amount, the solution will be saturated, thus, if one adds more than 45.8g the solution will start being supersaturated.
Best regards.
convert the following names to balanced formulas.
lead(IV) sulfide
why is it not Pb2S4 ?
The balanced chemical formula for lead(IV) sulfide is PbS₂, not Pb₂S₄. This correctly balances lead's +4 charge with two sulfur atoms, each with a -2 charge.
Lead(IV) sulfide is a chemical compound consisting of lead (Pb) and sulfur (S). The Roman numeral IV indicates that lead has an oxidation state of +4 in this compound. Sulfur commonly has an oxidation state of -2.
To form a neutral compound, we need to balance the charges. Lead(IV) has a charge of +4, and sulfur has a charge of -2. Therefore, it takes two sulfur atoms to balance one lead atom.
The balanced chemical formula for lead(IV) sulfide is PbS₂, not Pb₂S₄. The latter formula incorrectly represents the proportions since it can be simplified to PbS₂, as both share the same ratio.
Lead (IV) Sulfide: PbS₂Lead has an oxidation state of +4 (Pb₄+).Sulfur has an oxidation state of -2 (S₂-).The formula must balance to zero, i.e., 1(4+) + 2(2-) = 0.Thus, the correct balanced chemical formula is PbS₂.
part a: What volume of 10.0 M NaOH is needed to prepare a buffer with a pH of 7.79 using 31.52 g of TrisHCl?
answer : 6.7ml
Part B: The buffer from Part A is diluted to 1.00 L. To half of it (500. mL), you add 0.0200 mol of hydrogen ions without changing the volume. What is the pH of the final solution?
answer : pH 7.28
Part C: What additional volume of 10.0 M HCl would be needed to exhaust the remaining capacity of the buffer after the reaction described in Part B? In other words, how much more of this HCl solution is required to consume the remaining Tris in the buffer?
HELP ME FOR PART C PLEASE!!!
To calculate the volume of 10.0 M HCl needed to exhaust the remaining capacity of the buffer, determine the moles of TrisHCl remaining after adding hydrogen ions and use stoichiometry to calculate the required volume.
Explanation:To calculate the additional volume of 10.0 M HCl needed to exhaust the remaining capacity of the buffer, we need to determine the number of moles of TrisHCl that remain after adding 0.0200 mol of hydrogen ions to half of the buffer. This will give us the amount of TrisHCl that needs to be neutralized. From there, we can calculate the volume of 10.0 M HCl needed to neutralize the remaining TrisHCl.
First, calculate the moles of TrisHCl in the initial buffer solution. Use the given mass of TrisHCl (31.52 g) and its molar mass to calculate the moles.Next, calculate the moles of TrisHCl that were neutralized by adding 0.0200 mol of hydrogen ions. Subtract this value from the moles of TrisHCl calculated in step 1.Finally, calculate the additional volume of 10.0 M HCl needed to neutralize the remaining moles of TrisHCl. Use the balanced equation for the reaction between TrisHCl and HCl to determine the stoichiometric ratio between the two substances.The calculated volume will be the additional volume of 10.0 M HCl needed to exhaust the remaining capacity of the buffer.
Learn more about Volume calculation here:https://brainly.com/question/33318354
#SPJ3
An additional 18 mL of 10.0 M HCl is required to exhaust the remaining capacity of the buffer. This is determined by calculating the amount of Tris that remains unreacted and can further neutralize HCl.
What additional volume of 10.0 M HCl would be needed to exhaust the remaining capacity of the buffer after the reaction described in Part B?
First, we need to understand the capacity of the buffer system. From Part A, we have 31.52 g of TrisHCl.
Step 1: Calculate the moles of TrisHCl.
Molecular Weight of TrisHCl = 157.60 g/molMoles of TrisHCl = 31.52 g / 157.60 g/mol = 0.20 molStep 2: Calculate the initial moles of Tris (conjugate base) and TrisH+ (conjugate acid).
From Part B, 0.0200 mol of hydrogen ions were added to the buffer.This will react with 0.0200 mol of Tris to form TrisH+, leaving 0.18 mol of Tris and 0.20 mol of TrisH+.Step 3: Determine the remaining capacity to neutralize more HCl.
Moles of Tris available to react = 0.18 mol (since it can accept more H+ from HCl).Step 4: Calculate the volume of 10.0 M HCl needed to exhaust the buffer.
Moles of HCl needed = 0.18 molVolume of HCl = Moles / Concentration = 0.18 mol / 10.0 M = 0.018 L = 18 mLTherefore, an additional 18 mL of 10.0 M HCl is required to exhaust the remaining capacity of the buffer.
classify correct or incorrect.
Convection only occurs in liquids?
All substances radiate heat?
our body temp. is always equal to the temp. around us?
Answer:
1. Incorrect, it occurs in gases as well or generally in fluids.
2. Correct.
3. Incorrect.
Explanation:
Hello,
1. Convection, is a heat transport phenomena which occurs when a fluid transfers energy in the form of heat to a surface or vice-versa, in such a way, it occurs fluid, say, in both gases and liquids.
2. In this case, radiation is a heat transfer phenomena which occurs by thermal waves transferring the heat; such waves are generated by a hot body which it is said to irradiate the waves by cause of its inner temperature, therefore, as it could be surrounded by a colder space, heat is transferred. As a result of the high temperature, all substances could radiate heat.
3. In this case, it is widely known that normal temperature is between 20 and 25 ºC while the body's inner temperature is about 37 ºC for our organism to work properly. In such a way, those temperatures are different.
Best regards.