If a clock expends 2 W of power from a 1.5 V battery what amount of current is supplying the clock?

Answers

Answer 1
1.3 A
If a clock expends 2 W of power from a 1.5 V battery, what amount of current is supplying
the clock?
solution
as we know
p=vi
i=p/v
=2/1.5
=1.3A
Answer 2

The power generated at the clock is dependent on the voltage and current supplied to the clock. The amount of current supplied to the clock is 1.34 A.

What is power?

Power can be defined as the amount of energy transferred per unit time interval within a system.

Given that the voltage V is 1.5 V and power P generated at the clock is 2 W.

The power generated at the clock is given by the formula,

[tex]P = VI[/tex]

[tex]2 = 1.5 \times I[/tex]

[tex]I = 1.34 \;\rm A[/tex]

Hence we can conclude that the amount of current supplied to the clock is 1.34 A.

To know more about the power, follow the link given below.

https://brainly.com/question/1618040.


Related Questions

What is the frequency of a microwave that has a wavelength of 5 cm?what is the frequency of a microwave that has a wavelength of 5 cm?

Answers

v= frequency x wavelength

The average velocity of a microwave is 3x10^8m/s.

3x10^8m/s= (.05m) x frequency

f= 6x10^9Hz

Frequency of a microwave is 6 × 10⁹ Hz

Given that;

Wavelength of microwave = 5 cm = 0.05 m

Find:

Frequency of a microwave

Computation:

Velocity of microwave = 3 × 10⁸ m/s

Velocity = Frequency × Wavelength

3 × 10⁸ = Frequency of a microwave × 0.05

Frequency of a microwave = 6 × 10⁹ Hz

Learn more:

https://brainly.com/question/14316711?referrer=searchResults

The velocity of sound in sea water is 1533 m/s. find the bulk modulus (in n/m2) of sea water if its density is 1.025 ´ 103 kg/m3.

Answers

The speed of sound in a medium is given by:
[tex]c= \sqrt{ \frac{K_s}{\rho} } [/tex]
where
Ks is the bulk modulus
[tex]\rho[/tex] is the medium density

In our problem, [tex]c=1533 m/s[/tex] and [tex]\rho =1025 \cdot 10^3 kg/m^3[/tex], so if we re-arrange the previous equation we can find the bulk modulus of sea water:
[tex]K_s = \rho c^2 = (1025 kg/m^3)(1533 m/s)^2=2.41 \cdot 10^9 N/m^2[/tex]

Answer:

Bulk modulus, [tex]B=2.40\times 10^9\ N/m^2[/tex]

Explanation:

Given that,

The velocity of sound in sea water, v = 1533 m/s

Density of water, [tex]\rho=1.025\times 10^3\ kg/m^3[/tex]

We need to find the bulk modulus. The speed of sound also depends on the bulk modulus of the material. The relationship is given by :

[tex]v=\sqrt{\dfrac{B}{\rho}}[/tex]

[tex]B=v^2\times \rho[/tex]

[tex]B=(1533\ m/s)^2\times 1.025\times 10^3\ kg/m^3[/tex]

[tex]B=2.40\times 10^9\ N/m^2[/tex]

So, the bulk modulus of the sea water is [tex]2.40\times 10^9\ N/m^2[/tex]. Hence, this is the required solution.

Baking soda is often used in experiments to neutralize vinegar. In the picture above, the beaker on the left contains a solution of vinegar. What can you conclude about the picture on the right?
A) The solution on the right has a pH less than 7.
B) The solution on the right will not conduct electricity.
C) It has similar characteristics as HCl and H2SO4.
D) It must be a base since is has the opposite reaction to litmus paper as vinegar and vinegar is an acid.

Answers

The answer is D) It must be a base since is has the opposite reaction to litmus paper as vinegar and vinegar is an acid.

it would be D   since it would react the opposite of the litmus paper

One object has a charge of +5.0 · 10-6 c, and a second object has a charge of +2.0 · 10-6
c. the objects are 0.5 meters apart. what is the electrostatic force between them?

Answers

The electrostatic force between two charged objects is given by
[tex]F=k \frac{q_1 q_2}{r^2} [/tex]
where
k is the Coulomb's constant
q1 is the charge of the first object
q2 is the charge of the second object
r is the separation between the two objects

In our problem:
[tex]q_1=+5.0 \cdot 10^{-6} C[/tex]
[tex]q_2 = +2.0 \cdot 10^{-6} C[/tex]
[tex]r=0.5 m[/tex]
So if we plug these numbers into the equation, we can find the electrostatic force between the two objects:
[tex]F=(8.99 \cdot 10^9 Nm^2C^{-2}) \frac{(5.0 \cdot 10^{-6} C)(2.0 \cdot 10^{-6}C)}{(0.5 m)^2}=0.36 N [/tex]

Final answer:

Using Coulomb's Law, the electrostatic force between two positive charges of +5.0 · 10^-6 C and +2.0 · 10^-6 C, 0.5 meters apart, is calculated to be approximately 0.0719 Newtons, indicating a repulsive force.

Explanation:

To calculate the electrostatic force between two charges, we use Coulomb's Law, which is expressed as F = k * |q1 * q2| / r2, where F is the force between the charges, k is the Coulomb's constant (approximately 8.987 x 109 N m2/C2), q1 and q2 are the magnitudes of the charges, and r is the distance between the centers of the two charges.

For the charges of +5.0 · 10-6 C and +2.0 · 10-6 C separated by 0.5 meters, we substitute these values into the formula to get the electrostatic force. Therefore, F = (8.987 x 109) * (5.0 x 10-6 * 2.0 x 10-6)/(0.5)2.

After calculating, F equals approximately 0.0719 Newtons. This force is repulsive since both charges are positive.

The sound emitted by bats has a wavelength of 3.7 mm. what is the sound's frequency in air?

Answers

The relationship between frequency, wavelength and speed of a wave is given by:
[tex]f= \frac{v}{\lambda} [/tex]
where
f is the frequency
v is the speed of the wave
[tex]\lambda[/tex] is the wavelength

The bat sound has a wavelength of 
[tex]\lambda=3.7 mm=3.7 \cdot 10^{-3} m[/tex]
while the speed of the wave is just the speed of sound in air:
[tex]v=343 m/s[/tex]
Therefore, the frequency of the bat sound is
[tex]f= \frac{v}{\lambda}= \frac{343 m/s}{3.7 \cdot 10^{-3}m}=9.27 \cdot 10^4 Hz [/tex]

In a third class lever, the distance from the effort to the fulcrum is ____________ the distance from the load/resistance to the fulcrum.

Answers

The complete sentence is:
In a third class lever, the distance from the effort to the fulcrum is SMALLER the distance from the load/resistance to the fulcrum.
In fact, in a third class lever, the fulcrum is on one side of the effort and the load/resistance is on the other side, so the effort is located somewhere between the two of them. This means that the distance effort-fulcrum is smaller than the distance load-fulcrum.

What is the magnitude of δv12 if the bulb is removed from the socket (i.e. the circuit is not closed)?

Answers

If the socket is open after removing the bulb, then the substitute value is
I = 0 A
ΔV₁₂ = IR
= (OA)(2Ω)
= 0 V

Since the circuit is incomplete or not closed, no current flows in the circuit. as per ohm's law , Voltage is directly proportional to current and is given as

V = Voltage = i R where i = current , R = resistance

as no current flows in the circuit, i = 0

the resistance R can not be zero. hence

V = 0 (R)

V = 0 Volts

so the magnitude of the Voltage is zero Volts

What is a charestic of an electromagnetic wave?

Answers

it travels at the speed of light 

Form of communication that reaches large audiences without personal contact.

Answers

Socialization is the process of internalization of the norms and ideologies of society by an individual. It encompasses learning and teaching to attain social and cultural continuity. It also has various forms. One of which is the MASS MEDIUM/MEDIA which is a form of communication that does not need personal contact to relay or convey and information. Examples of which are books, films, internet, magazines and so forth.

The form of communication that doesn't require personal contact and capable of getting to a large audience is referred to as mass media.

What is Communication?

This is the process in which information is transferred from one person to another.

Mass media which comprises of newspapers, internet etc reach large audiences without personal contact and is the commonest means in these present day.

Read more about Mass media here https://brainly.com/question/17658837

1. A U.S. manufacturer wants to sell computer equipment to companies in Honduras. Because the U.S. government limits trade with Honduras, the manufacturer is required to obtain an export license from the Department of Commerce before selling and shipping the equipment to the purchasers. The export license fee is $8,100, not including a nonrefundable application fee of $2,700. What are the possible effects of these fees?

Answers

If the US government does not allow the manufacturer to export their products to Honduras, the manufacturer will lose the non-refundable application fee of $2,700 and because the U.S. government limits trade with Honduras, the manufacturer is required to obtain an export license from the Department of Commerce, which can result to a shortage of demand for US products.

In addition, the total value of product exports must not less than $10800 for the duration of the license so that the application and license fee will be worthwhile. 

The imposition of an export license fee and a nonrefundable application fee can increase costs, reduce profit margins, and impact demand for U.S. manufacturers selling to Honduras.

Obtaining an export license for selling computer equipment to Honduras involves a fee of $8,100, plus a nonrefundable application fee of $2,700. These fees could have several potential effects on the U.S. manufacturer:

Increased Costs: The total cost of $10,800 ($8,100 + $2,700) may increase the final price of the equipment, making it less competitive in the Honduran market.Reduced Profit Margins: Unless the manufacturer can pass these costs onto the buyers, the profit margins will be reduced.Impact on Demand: Higher prices due to increased costs can result in lower demand, as buyers may seek more affordable alternatives.

For example, if the equipment normally sells for $100,000, adding $10,800 in fees could push the price to $110,800, potentially reducing its attractiveness compared to local or other international sellers.

Which type of mirror is used to focus light rays?

Answers

Astronomical (reflecting) telescopes. In a reflecting telescope, instead of a convex objective lens, a concave mirror is used to collect parallel rays from the object and form an image at the focal point
i be leave it is a concave mirror
and please do not report me be cause people do that and say my answers are not good

How does the doppler effect explain differences in sound pitch? choose all that apply?

Answers

Doppler effect explains that the approaching sound wave has a shorter apparent wavelength than the sound wave moving away thus the approaching sound wave has a higher pitch than the sound wave moving away.

What is doppler effect?

As a wave is approaching towards an observer is amplitude and frequency increases for the observer. Whereas , when it goes away from the observer, thus when it assume longer wavelength the frequency decreases and the intensity of the wave that the observer collects reduces.

The frequency of a sound wave is called pitch. As the wavelength of the wave increases, its pitch decreases. The apparent wavelength of the sound waves near to the observer will be lower.

When the wave moves away its apparent wavelength increases result in the decreased pitch of the sound waves for the observer.

To find more on doppler effect, refer here:

https://brainly.com/question/15318474

#SPJ5

Suppose the exhaust system on a heat engine is not functioning properly. Which statement best explains how this will affect the engine?

A) The temperature of the gas will not increase during the compression stage.
B) Burned gases will not be released into the surrounding air.
C) The fuel-air mixture will not be able to enter the cylinder.
D) Combustion and subsequent gas expansion will not occur.

Answers

If the exhaust system on a heat engine is not functioning properly then burned gases will not be released into the surrounding air. Therefore, option (B) is correct.

What is the exhaust system?

An exhaust system can be used to guide reaction exhaust gases away from the controlled combustion in an engine. The entire system delivers burnt gases from the engine and involves one or more exhaust pipes.

An exhaust pipe should be carefully designed to carry toxic gases away from the users of the machine. Generators and furnaces can immediately fill an enclosed space with poisonous exhaust gases such as carbon monoxide, hydrocarbons, and nitrogen oxides.

The gases from most kinds of machines are very hot and the pipe must be heat-resistant. It should not pass near anything that can burn or can be damaged by heat. A chimney also serves as an exhaust pipe in a stationary system.

If the exhaust system is not functioning properly then burned gases will not be emitted into the surrounding air.

Learn more about exhaust system, here:

https://brainly.com/question/28233336

#SPJ6

Answer:B)

Explanation:

Maggie participated in a race. She ran 100 meters west and then turned back and ran to the starting line to complete the race. Maggie covered this entire distance in 40 seconds. What are her average speed and average velocity?

Answers

Her total distance was 200 meters, since she ran 100 meters west and the same 100 meters back. This gives an average speed of 200 m / 40 s = 5 m/s.

However, her displacement was 0, since she ended at the same place she began, therefore, her average velocity is 0 / 40 s = 0.

Answer:

Explanation:

:)

An opera singer sings a note that breaks a glass. This is an example of _____. consonance dissonance resonance reflection

Answers

Resonance, Because its another way of saying sound waves. It determined the objects frequency. 

The Answer is

C. Resonance

LOL EZ CLAP

Is it possible for an object moving with a constant speed to accelerate? explain?

Answers

Yes, as long as it hasn't reached its maximum speed. Think of a car going 30mph, it can remain at this speed and travel at a constant rate; however, the car could also increase it's speed further. Hope this answers your question.

When the surface of an object is ____ the plane of projection, the surface appears in its true size and shape on the plane of projection?

Answers

"Parallel to" the plane of projection

The speed of light in a vacuum is 2.99x10^8 m/s. calculate its speed in miles per hour.

Answers

You'll never get the correct answer without the correct conversion factor. Note carefully that you have no decimal. It should be 
1 km = 0.6214 miles 
1000 m = 1 km 
60 seconds = 1 minute 
60 minutes = 1 hour. 
2.998E8 m/s x (1 km/1000m) x (0.6214 miles/km) x (60 sec/min) x (60 min/hr) = ?

In which of the following forms of energy might you find specially placed tiles on the floor?

Answers

kinetic energy.Kinetic energy is the energy of motion. Floor tiles with electromechanical technology produce electricity when people step on them because movement results in a rotatory motion that generates electrical energy. Kinetic tiles usually work on process known as the piezoelectric effect.^-^

Answer:

Passive solar

Explanation:

Element Z has a half-life of 20 minutes. In an events chain concept map tracing the nuclear decay of a 200g sample of element Z, would any of element Z remain after 160 minutes? If so, how much?

Answers

Radioactive decay expression is stated as:

N(t) = N(o) e^(-0.693t/t1/2)

N(t) = Amount remaining after time t, N(o) = Initial amount at t=0, t1/2 = Half-life.

This expression is of exponential type and thus there is an amount remaining at any given time.

At t = 120 minutes, the amount remaining can be calculated as follows:
Substituting for the values given;
N(160) = 200*e^(-0.693*120/20) = 3.13 g
Final answer:

Given a half-life of 20 minutes for element Z, a 200g sample would undergo eight cycles of reduction by half over 160 minutes, leaving 0.78g of element Z remaining. The element doesn't disappear but transforms into 'daughter elements'.

Explanation:

The concept being discussed here is known as the half-life, which is the time it takes for half the atoms in a sample to decay. In this case, element Z has a half-life of 20 minutes. Given that the half-life is the time it takes for half of a substance to decay, we would use this information to determine the remaining quantity of element Z after 160 minutes.

A 200g sample of Element Z would undergo eight half-life cycles in 160 minutes (20 minutes per cycle). Following the pattern of half-life decay, after each cycle the remaining amount would be 100g, 50g, 25g, 12.5g, 6.25g, 3.125g, 1.56g, and finally 0.78g. So, after 160 minutes, there would be 0.78g of element Z remaining.

Please note that the substance doesn't completely disappear but transforms into decay products or, using the metaphor, 'daughter elements' while element Z is the 'parent' element.

Learn more about half-life here:

https://brainly.com/question/24710827

#SPJ3

When you put a ice cube in a warm drink and the ice cube thermal energy decreases and the drink thermal energy increases, how does the energy move? What is the situation when the ice cube would give off the heat?

Answers

Thermal energy always flows spontaneously from the body that is at a higher temperature to the body that has a lower temperature.
 In this case, the thermal energy flows from the hot beverage that is at the temperature t1 to the ice cube at the temperature t2 until the two reach the same temperature t3.
 Where:
 t1> t2 <t3.
 The ice cube would emit heat if the temperature of the liquid with which it comes in contact with the smaller than that of the ice.

What is the speed of a wave with a frequency of 0.2 Hz and a wavelength of 100 meters?

Answers

Answer: The velocity of the wave is 20m/s

Explanation: The velocity of a wave can be obtained by the equation:

Velocity = wavelenght*frequency.

or v = λ*f

In this case, we know that: λ = 100 meters, f = 0.2Hz (where Hz means 1/s)

then, we have that the velocity of the wave is:

v = 100m*(0.2*1/s) = (100*0.2)m/s = 20m/s

The speed of a wave is mathematically given as

[tex]\lambda= 20m/s[/tex]

What is the speed of a wave with a frequency of 0.2 Hz and a wavelength of 100 meters?

Question Parameters:

the speed of a wave with a frequency of 0.2 Hz

and a wavelength of 100 meters

Generally, the equation for the  Wave speed (m/s)  is mathematically given as

[tex]\lambda= frequency (Hz) x wave length (m) \\\\\lambda=0.2 x 100[/tex]

\lambda= 20m/s

For more information on Wave

https://brainly.com/question/3004869

How much energy is needed to change the temperature of 50.0 g of water by 15.0oc?

Answers

The amount of energy needed to increase the temperature of a substance by [tex]\Delta T[/tex] is given by:
[tex]Q=m C_s \Delta T[/tex]
where
m is the mass of the substance
Cs is the specific heat capacity of the substance
[tex]\Delta T[/tex] is the increase in temperature

In our problem, m=50.0 g, [tex]C_s = 4.18 J/g ^{\circ}C[/tex] (specific heat capacity of water) and [tex]\Delta T=15.0 ^{\circ}C[/tex], therefore the amount of energy needed is
[tex]Q=mC_s \Delta T=(50.0 g)(4.18 J/g^{\circ}C)(15.0^{\circ}C)=3135 J[/tex]

3135 J of energy is needed to change the temperature of 50g of water by [tex]\rm 15^\circ C[/tex].

Given :

Mass of water is 50g

Change in temperature = [tex]\rm 15^\circ C[/tex]

Solution :

We know that energy needed to increase the temperature of a substance is,

[tex]\rm Q = mC_s \Delta T[/tex]   ---- (1)

where,

m is the mass of the substance,

[tex]\rm C_s[/tex] is the specific heat capacity of the substance,

[tex]\rm C_s = 4.18 \; J/g ^\circ C[/tex]   ---   (specific heat of water)

and [tex]\rm \Delta T[/tex] is the change in temperature.

Now put the values of [tex]\rm m,\;\Delta T\; and \; C_s[/tex]  in equation (1) we get,

[tex]\rm Q = 50\times 4.18 \times 15[/tex]

[tex]\rm Q = 3135\;J[/tex]

3135 J of energy is needed to change the temperature of 50g of water by [tex]\rm 15^\circ C[/tex].

For more information, refer the link given below

https://brainly.com/question/17858145?referrer=searchResults

Which of the following are properties of acids?

Check all that apply.

A. React with certain metals to produce hydrogen gas
B. React with other acids to produce salt and water
C. Taste sour
D. Corrosive

Answers

The properties of acids are: (A), (C) and (D).

Explanation:
Acids taste sour, and most acids are poisonous. Furthermore, acids react with certain metals to produce hydrogen gas. Few acids are corrosive as well. The option (B) is not valid because acids react with BASES (not with other acids) to produce salt and water. Hence A, C and D are the correct options.

The true statements as regarding the properties of acids are:

React with certain metals to produce hydrogen gas (option A)Taste sour (option C)Corrosive (option D)

What are the properties of acids?

An acid is a substance which dissolves in water to produced hydronium ion as the only positive ion.

Acid is know for it unique properties which differentiate them from other substances. Such properties includes:

Acids reacts with metals to produce hydrogen gas.Acids have sour taste.Acids are corrosive in natureAcids react with base to form salt and waterAcids have a pH lower than 7Acid turn blue litmus paper red

With the above information about acids, we can conclude that the correct  statement as given from the options are:

React with certain metals to produce hydrogen gas (option A)Taste sour (option C)Corrosive (option D)

Learn more about properties of acid:

https://brainly.com/question/30466532

#SPJ6

How is coulomb's law similar to newton's law of gravity?

Answers

Newton's law of gravitation is attractive, whereas Coulomb's law is attractive or repulsive. Both are proportional to the inverse square of distance.

Both Coulomb's law and Newton's law are inverse laws. In the case of Coulomb's law, the force is inversely proportional to the square of the distance between point charges. In the case of Newton's gravitational law, the force is inversely proportional to the square of the distance between masses.

What are Coulomb's law and Newton's law?

Coulomb’s law can be described as the force of attraction between two charged bodies or point charges being the multiplication of their charges and is inversely proportional to the square of the distance between them. This force exerts along the line joining of the two-point charges.

The electrostatic force between two point charges can be expressed as:

[tex]{\displaystyle F =k \frac{q_1q_2}{r^2}[/tex]

where k is constant proportionality = 8.99 × 10⁹ N.m²/C².

Newton’s Law can be described as every particle attracting every other particle in the universe with force directly proportional to the product of the masses and inversely proportional to the square of the distance by which they are separated.

The magnitude of gravitational force is given by the following expression:

[tex]{\displaystyle F =G \frac{m_1m_2}{r^2}[/tex]    where G is the universal gravitational constant.

Learn more about Coulomb's law, here:

brainly.com/question/506926

#SPJ5

hey im studying and need help....

Answers

area B cause it lets say ice for intense it goes from ice to water and then to gas depending on how hot the heat is

If the resistance of an electric circuit is 12 ohms and the voltage in the circuit is 60 V, the current flowing through the circuit is...

A. 60 A.
B. 5 A.
C. 0.2 A.
D. 720 A.

Answers


Current = (voltage)/(resistance) = (60 v) / (12 ohms) = 5 amperes  (B)
The formula for calculating the current flowing in a circuit is:
I = V /R
Where:
I = current = ?
V = voltage = 60 V
R = resistance = 12 Ohms
I = V /R = 60/ 12 = 5
Therefore, the current flowing through the circuit is 5 A.

A crane lifts a 6.500 N weight 10 m in 180 seconds. What power is used?

Answers

Power is work over time.

[tex]P= \frac{W}{t} [/tex]

We can solve for work by using F*d

[tex]W=F*d = (6.500N)(10m) = 65 J[/tex]

Now solve for power:

[tex]P= \frac{(65J)}{180s} = 0.361W P=0.361W[/tex]

To what volume will a sample of gas expand if it is heated from 50.0°c and 2.33 l to 500.0°c?

Answers

The volume of the gas at [tex]500^{\circ} \text{C}[/tex] is [tex]\fbox{\begin\ 5.576\,{\text{L}}\\\end{minispace}}[/tex].

Further Explanation:

Consider the pressure of the gas to be constant.  

The change in the volume of the gas when the temperature of the gas is varied by keeping the pressure of the gas at a constant value is defined by the Charles' Law.

Concept:

According to the Charles law, the volume of the gas is directly proportional to the temperature of the gas at constant pressure.

The Charles' law can be stated as:

[tex]\fbox{\begin\\V\propto T\\\end{minispace}}[/tex]

The above expression can we written as.

[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

Convert the temperature of the gas into kelvin.

[tex]T=273+T^\circ\text{C}}}[/tex]

Here, T is the temperature in kelvin and [tex]T^\circ\text{C}}}[/tex] is the temperature in centigrade.  

The initial temperature of the gas is [tex]50^\circ\text{C}[/tex]. The temperature of the gas in kelvin is.  

[tex]\begin{aligned}{T_1}&=273+50\\&=323\,{\text{K}}\\\end{aligned}[/tex]

The final temperature of the gas is [tex]500^\circ\text{C}[/tex] . The temperature in kelvin is.  

[tex]\begin{aligned}{T_2}&=273+500\\&=773\,{\text{K}}\\\end{aligned}[/tex]

Substitute the values of temperature and volume in the expression of the Charles' Law.  

[tex]\begin{aligned}{V_2}&=\frac{{{T_2}}}{{{T_1}}}{V_1}\\&=\frac{{773\,{\text{K}}}}{{323\,{\text{K}}}}\left({2.33\,{\text{L}}}\right)\\&=5.576\,{\text{L}}\\\end{aligned}[/tex]

Thus, the volume of the gas at [tex]500^\circ\text{C}}[/tex] will be [tex]\fbox{\begin\ 5.576\,{\text{L}}\\\end{minispace}}[/tex].

Learn More:  

1. Examples of wind and solar energy https://brainly.com/question/1062501

2. Stress developed in a wire https://brainly.com/question/12985068

Answer Details:  

Grade: High school  

Subject: Physics  

Chapter: Gas law  

Keywords:  

Charles law, temperature, volume, initial, final, kelvin, centigrade, 50 C, 500 degree, 500 C, 50 degree, 2,33 L, gas expand, sample, heated.

Final answer:

To solve this, we apply Charles's law, which relates the volume and the temperature of a gas when the pressure is held constant. Temperature values need to be converted to Kelvin, and we solve the equation V1/T1 = V2/T2 to find out the volume of the gas when heated.

Explanation:

To find out to what volume the sample of gas will expand when heated from 50.0°c and 2.33 l to 500.0°c, we can apply Charles's law. Charles's law states that the volume and temperature of a gas have a direct relationship when pressure is held constant. Thus, when the temperature goes up, so will the volume, and vice versa.

In this problem, we start by converting temperatures from Celsius to Kelvin, because Charles's law uses the absolute temperature scale (Kelvin). So, 50°C would convert to 323.15K, and 500°C would convert to 773.15K.

Then, we set up the equation using Charles's law V1/T1 = V2/T2 where V1 = 2.33L, T1 = 323.15K, T2 = 773.15K and V2 is what we want to find. Solving this equation with the given parameters will give us the unknown gas volume V2 at 500°C.

Learn more about Charles's Law here:

https://brainly.com/question/16927784

#SPJ3

converge means ?

a. come together to a point
b. spread apart or fanout
c. line up parallel

Answers

it means come together to a point A.
a converge like spread toward each other; converge into one
Other Questions
The scores on an exam are normally distributed with a mean of 74 and a standard deviation of 7. What percent of the scores are greater than 81?A. 50%B. 13.5%C. 84%D. 16% the height y (in feet) of a ball thrown by a child is [tex]y = \frac{1}{16} {x}^{2} + 4x + 3[/tex]where x is the horizontal distance in feet from the point at which the ball is thrown a).how high is the ball when it leaves the child's handb).what is the maximum high of the ballc).how far from the child does the ball strike the ground Solve this system by graphing: y=3/2x-1 and x=-2 Find the value of x. If necessary, found your answer to the nearest tenth. The figure is not drawn to scale If a gamete contains 5 chromosomes, how many chromosomes will a typical body cell contain? does the number of chromosomes change or remain the same just before mitosis (which is after chromosome duplication)? A system of equations can be solved by elimination in table The Painting of The Raft of the Medusa was painted with what type of art style raj is visiting the united states and needs to convert 2000 rupees to us dollars Garrett must inspect a bridge that goes over a river. He begins 18 feet above water level to inspect the lighting, descends 32 feet to inspect the base of the bridge underwater, then descends another 4 feet to check on the concrete anchoring the base. Which best represents Garretts position with respect to the water level?54 feet30 feet18 feet10 feet 16,500 pounds25,000 ounces1,000 pounds 200 ounces7 tons 200 pounds 100 ouncesFrom these from least to greatest Plz. Which element has a full valence shell of electrons Recurrent epidemics and widespread diarrhea, which kill millions of children each year, are often the result of __________. QuicklyWhich coordinates represent a translation of B(4, 1) 3 units to the right and 2 units down? Why did the United States conduct military operations in Korea? A. They were fighting against the Chinese in South Korea. B. They didn't want communist South Korea to gain more power. C. They were fighting against the Russians in North Korea. D. They didn't want communist North Korea to gain more power. Quadrilateral ABCD is a parallelogram. DE = 6.1 cm and mDAB = 120. What is BC? cm What is mBCD? What is AB? cm What is EB? cm Express answer in exact form.A segment of a circle has a 120 arc and a chord of 8in. Find the area of the segment. Rosario is concerned about her physical fitness. She has been recording in her journal the number of minutes she exercises each day for several days. She learns that she exercises an average of 15 minutes per day.Which would most likely help Rosario increase the amount of time she exercises?1)joining a local sports league2)increasing her amount of screen time3)increasing the number of healthy snacks she eats4)socializing with her peers Which is the best example of a cycle: a turn of a wheel or a slide down a ski slope? How did the idea of "property" affect the decision made by the Supreme Court in Dred Scott v. Sandford? Mission Control sends a signal to a Mars robot to travel to a mysterious rock 52.8 meters away. A return signal 59.0 minutes later tells scientists that the robot is at the rock. It took the signal 9.5 minutes to get from Earth to Mars, and the same time to get back. What was the robots average speed in meters per minute?