If the apparent magnitude of a star increases,the star get brighter, true or false?

Answers

Answer 1
False, it does not change.

Related Questions

2. List the layers of Earth from the center out to the crust. What is the composition of each layer?

Answers

Inner core: Iron and nickel
Outer core: Molten iron and nickel
Mantle: Magnesium and iron
Crust: Silicon, magnesium, iron, aluminium, oxygen, etc.

What is steam distillation and why is it a preferred technique to purify high boiling liquids that are water-insoluble?

Answers

Steam distillation is a separation process for temperature sensitive materials and it is used for purification of organic compounds.

The water vapor carries small amounts of the vaporized compounds (water and organic molecules) to the condensation flask. This is preferred technique because allows easy separation of the components by decantation or other suitable methods, because  product od distilation is a two phase system of water and the organic distillate.

Steam distillation is a technique used to purify high boiling liquids that are water-insoluble. It involves introducing steam to vaporize the compound at a temperature lower than its normal boiling point, making the process efficient and preventing decomposition.

What is Steam Distillation?

Steam distillation is a variation of simple distillation technique that involves the use of steam or water in addition to the material to be distilled. The main purpose of utilizing steam is to facilitate the distillation of compounds that are water-insoluble and have high boiling points. When steam is introduced into the distilling flask, it helps in vaporizing the organic compound at a temperature lower than its normal boiling point. This process is ideal for purifying such substances because it reduces the risk of decomposition, which is often linked with the high temperatures required for distilling high boiling point liquids.

The distillation apparatus setup for this method is similar to that of simple distillation, with slight modifications to introduce steam into the system. There are two primary ways to add the steam: indirectly by connecting to a building's steam line, or directly by boiling water within the distillation flask itself.

Steam distillation is especially beneficial in separating and purifying volatile compounds from non-volatile impurities or substances with very high boiling points without decomposition. This method is not only used in laboratory settings but also has wide applications in industrial processes, such as the extraction of essential oils and the refinement of certain petrochemicals.

why might polar bears might become extinct A. they may drown when the glaciers melt B. too many people hunt them C. they do not have any predators D. their thick fur is not suited for a warming climate

Answers

They may drown when the glaciers melt is the cause of extinction of polar bears.

Reasons for extinction of polar bears

The climate change is the main factor for extinction of polar bear. This climate change is responsible for melting and fragmention of sea ice across the Arctic, forcing more pregnant females to migrate to land. This fragmentation also causes the drowning of polar bears.

So we can conclude that They may drown when the glaciers melt is the cause of extinction of polar bears.

Learn more about extinct here: https://brainly.com/question/1048615

Answer:

Explanation:

A) Their thick fur is not suited for a warming climate.

Calculate the root mean square velocity of gaseous argon atoms at 26 ∘c.

Answers

Final answer:

The root mean square velocity of gaseous argon atoms at 26 °C is 364.42 m/s.

Explanation:

The root mean square velocity of gaseous argon atoms can be calculated using the equation Vrms= √(3kT/m), where k is the Boltzmann constant, T is the temperature, and m is the mass of the particle.

To calculate the velocity, we need to convert the temperature to Kelvin by adding 273.15 to the value in degrees Celsius. In this case, the temperature is 26 °C, so T = 26 + 273.15 = 299.15 K.

Substituting the given values and the molar mass of argon into the equation, we get Vrms= √(3 (1.38x10-23 J/K) (299.15 K) / (39.948 g/mol)) = 364.42 m/s.

Learn more about root mean square velocity here:

https://brainly.com/question/34455389

#SPJ12

Final answer:

The root mean square speed of gaseous argon atoms at 26 degrees Celsius is calculated using the root mean square equation and the constants for the Boltzmann constant and the molar mass of argon. The temperature is also converted to Kelvin.

Explanation:

In order to calculate the root mean square velocity of gaseous argon atoms at 26 degrees Celsius, we have to use the root mean square speed equation, which is also known as the urms equation. The urms is a measure of the average speed for a group of particles. This equation is calculated as the square root of the average squared speed.

Firstly, we need to convert the temperature to Kelvin by adding 273.15 to the Celsius temperature. Hence, the temperature (T) becomes 299.15K.

The formula for root mean square velocity is Vrms = sqrt(3kT/m) where k is the Boltzmann constant (1.38×10−23 J/K) and m is the molar mass of argon which is 39.95g/mol. Please note, that the molar mass should be converted to kg/mol which becomes 39.95x10^-3 kg/mol.

So, urms=sqrt[(3)(1.38×10−23 J/K)(299.15K)/(39.95x10^-3 kg/mol)]. This will give you the root mean square speed of gaseous argon atoms at 26 degrees Celsius.

Learn more about Root Mean Square Velocity here:

https://brainly.com/question/31115639

#SPJ11

How many liters of water vapor can be produced if 108 grams of methane gas (CH4) are combusted at 312 K and 0.98 atm? Show all of the work used to solve this problem. CH4 (g) + 2O2 (g) yields CO2 (g) + 2H2O (g)

Answers

PV=mRT/M(.98)V=(108)(.0821)(312)/(16.04)(.98)V=172.47V=176.0 L CH4

Answer:

176 L liters of water vapor can be produced.

Explanation:

Using the Ideal gas law,

PV = nRT, where P, T, n, R and T stand for pressure, volume, moles, universal gas constant and temperature respectively.

n = m/M, where n, m and M stand for moles, mass and molar mass respectively.

PV = [tex]\frac{mRT}{M}[/tex]

Given ,

T = 312 K

P = 0.98 atm

m = 108 g

M (CH4) = 16.04 g /mol

R = 0.0821 Latm/molK

V = [tex]\frac{mRT}{PM}[/tex]

Plugging the numbers in the  Ideal gas law we get,

V = [tex]\frac{(108 g)(0.0821 Latm/molK)(312K)}{(16.04g/mol)(0.98atm)}[/tex]

V = 175.99 L

Count: electrons move around the nucleus of atoms in specific shells, shown by the rings around the atoms in the gizmo. the first ring holds two electrons, and the second holds eight. (electrons in the inner rings are not shown; you can assume these rings are full.)
a. observe the sodium and chlorine atoms. assuming that the inner rings are full of electrons, how many electrons are there total in each atom? sodium: ____________________ chlorine: ___________________
b. each atom is neutrally charged, which means that each atom has the same number of protons and electrons. based on this, how many protons are in each atom? sodium: ____________________ chlorine: ___________________

Answers

A. Sodium: 11            Chlorine: 17
B.Sodium: 11             Chlorine: 17
Final answer:

A neutrally charged atom has the same number of electrons and protons. Therefore, a sodium atom has 11 electrons and 11 protons, while a chlorine atom has 17 electrons and 17 protons.

Explanation:

A given atom's electron count can be identified by looking at its atomic number because a neutrally charged atom has an equal amount of protons and electrons. Sodium has an atomic number of 11, which means it has 11 electrons if it is neutrally charged. Similarly, chlorine, with an atomic number of 17, has 17 electrons.

As stated, a neutrally charged atom has an equal number of protons and electrons. Thus, the proton count is also dictated by the atomic number. Sodium, therefore, has 11 protons, and chlorine will have 17 protons.

Learn more about Atomic Structure here:

https://brainly.com/question/33054877

#SPJ3

Calculate the mass of nitrogen dissolved at room temperature in a 80.0 l home aquarium. assume a total pressure of 1.0 atm and the mole fraction for nitrogen of 0.78. (the kh value for nitrogen in water is 6.1 x 10-4 m/atm.)

Answers

Final answer:

To calculate the mass of nitrogen dissolved in an 80.0 L aquarium, apply Henry's Law using the mole fraction and total pressure alongside the molar mass of N2, resulting in approximately 1.066 grams of dissolved nitrogen.

Explanation:

To calculate the mass of nitrogen dissolved in an 80.0 L home aquarium at room temperature, we consider the given total pressure of 1.0 atm and the mole fraction for nitrogen of 0.78. With the Henry's law constant (Kh) for nitrogen in water being 6.1 x 10-4 M/atm, we can determine the concentration of dissolved nitrogen first.

First, calculate the partial pressure of nitrogen (PN2) using the mole fraction and total pressure:

PN2 = mole fraction of N2 * total pressure = 0.78 * 1.0 atm = 0.78 atm

Next, apply Henry's Law to find the concentration of N2 in moles per liter (M):

Concentration of N2 = Kh * PN2 = 6.1 x 10-4 M/atm * 0.78 atm = 4.758 x 10-4 M

To find the total moles of N2 dissolved, multiply this concentration by the volume of the aquarium in liters:

Total moles of N2 = 4.758 x 10-4 M * 80.0 L = 0.038064 mol

Finally, to calculate the mass, we multiply the total moles by the molar mass of N2 (28.01 g/mol):

Mass of N2 = 0.038064 mol * 28.01 g/mol = 1.066 g

How Many Atoms Are In 356.13 Grams Of Sn

Answers

There are three atoms of Sn (Stannous or Tin) in 356.13 g of Sn.

One atom of Sn has the atomic mass (mₐ) of 118,71u which means:

356.13/118.71=3 atoms of Sn

The mass number (symbol A) also called atomic mass number or nucleon number is the total number of protons and neutrons in an atomic nucleus. It determines the atomic mass of atoms and it is in the periodic table.

Which of the following atoms would have the greatest velocity if each atom had the same kinetic energy?

Answers

the answer is hydrogen 

An atom would have the greatest velocity if each atom had the same kinetic energy is hydrogen. Therefore, option A is correct.

What do you mean by the kinetic energy ?

The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. Once the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

The reason molecules in gases have the largest kinetic energy is because they have greater space between one another, experience less intermolecular force, and travel at a faster rate, which results in higher energy.

The most kinetic energy is found in gases, whereas solids have the lowest. So, of the examples above, hydrogen has the largest kinetic energy.

Thus, option A is correct.

To learn more about the kinetic energy, follow the link;

https://brainly.com/question/15764612

#SPJ6

Your question is incomplete, most probably your question was

Which of the following atoms would have the greatest velocity if each atom had the same kinetic energy?

A. Hydrogen

B. Oxygen

C. Carbon

D. Sulfur

The average atomic mass of oxygen is 15.9994 amu. The atomic masses of its three isotopes are as follows: O-16: 15.995 amu; O-17: 16.999 amu; O-18: 17.999 amu Which isotope is most likely to have the greatest abundance in nature? O–16 O–17 O–18 all three isotopes may be equally abundant

Answers

the average atomic mass of oxygen is the atomic mass with respect to 1/12th the mass of a C-12 atom, related to natural abundance. 
amu - atomic mass units 
O-16 - 15.995 amu
O-17 - 16.999 amu
O-18 - 17.999 amu
the average atomic mass is 15.9994 amu
average atomic mass = ∑atomic mass of each isotope * relative abundance percentage
in other words the average atomic mass is closer to the atomic mass of the most abundant isotope. In this case 15.9994 is closest to 15.995 amu which is the atomic mass of O-16.
This means that O-16 is the most abundant isotope.

Answer: O-16

Explanation: To keep it short and sweet the answer is O-16

How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret

Answers

Answer is: 0,0105 moles of calcium chloride have delivered to the flask.
V(CaCl₂) = 20,53 mL ÷ 1000 mL/L = 0,02053 L.
c(CaCl₂) = 0,511 M = 0,511 mol/L.
n(CaCl₂) = c(CaCl₂) · V(CaCl₂).
n(CaCl₂) = 0,511 mol/L · 0,02053 L.
n(CaCl₂) = 0,0105 mol.

We have that for the Question "How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret" it can be said that no of moles of solute is

[tex]no of moles of solute=0.011[/tex]

From the question we are told

How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret

Generally the equation for the morality  is mathematically given as

[tex]M=\frac{no of moles of solute}{volume of solution litre}[/tex]

Therefore

[tex]The volume of CaCl_2 =\frac{20.53}{1000}[/tex]

Hence

no of moles of solute=molality*volume*solution

[tex]no\ of\ moles\ of\ solute=0.511*\frac{20.53}{1000}[/tex]

[tex]no of moles of solute=0.011[/tex]

For more information on this visit

https://brainly.com/question/23379286

Which element is most metallic in character? EXPLAIN YOUR REASONING

Answers

You can tell the metallic property based on the first ionization of an element. The lower the first-ionization energy the more metallic the atom. So based on your table Element 2  is the most metallic. 

The more metallic an atom is the less amount of energy is needed to remove an electron. 

For h2o2(g), find the value of δh∘f. (use appendix c in the textbook.)

Answers

Delta H equals : -136.10 kj

Answer : - 136.0 KJ/mol

Explanation : The complete question is attached below; assuming that the bond energies are given as per the question to find out the heat of formation of [tex] H_{2}O_{2}_{(g)} [/tex] we need to draw its lewis dot structure for this reaction;

[tex] H_{2}_{(g)} + O_{2}_{(g)} ----> H_{2}O_{2}_{(g)} [/tex]

[tex] H_{2} [/tex] will have H-H bond and [tex] O_{2} [/tex] will have O=O with 2 pairs of lone electrons on each of O atom.....These are the bonds which are broken

In [tex] H_{2}O_{2}_{(g)} [/tex] has H-O-O-H bonds; Here, O atom again has 2 pairs of lone pairs on each O atom; ....These are bonds which are made

ΔH°f = ∑ {ΔH(bonds broken) - ΔH (bonds made)}

ΔH°f = ∑ { (432 + 494) - [(459 X 2) +142] }

On solving, We get,

ΔH°f = -136.0 KJ/mol

Hence, the heat of formation for [tex] H_{2}O_{2}_{(g)} [/tex] will be -136.0 KJ/mol

The atomic number of gold (Au) is 79, and it has a mass number of 197. How many electrons are present in each atom of gold?

Answers

There would be 79 electrons present in each atom of gold. I hope this helps :)

which element has the greatest atomic radius.

As

N

P

Sb

Answers

Sb has the greatest radius.

I hope this helps you! Please mark Brainliest!

-Belle

Answer : 'Sb' is the element which has the greatest atomic radius.

Explanation :

The general trend of the atomic radium of the element is that,

As we are going from left to right in a periodic table the atomic radius of the elements decreases and as we are going from top to bottom in a periodic table the atomic radius of the elements increases.

The given elements are the group 15 elements in which the 'Sb' is the element which has the greatest atomic radius as compared to N, P and As because as we are going from top to bottom in group 15 the the atomic radius of the elements increases that means the number of energy shells increases.

Hence, 'Sb' is the element which has the greatest atomic radius.

When parasites are found in food, the food has been exposed to _____ contamination.

Answers

the answer is '''coli''' ''coli'' is mostly acquired through under-cooked foods, such as meat and beef, which is why it is advisable to cook meat or beef using a thermometer to assure the cooking and may also avoid food contamination.

Answer: Coli contamination/ E.coli contamination

Explanation:

When there are harmful substance in, whether microorganisms or chemicals in food which can cause adverse effects on animals, the term for it is called food contamination. Food contamination can be caused contamination by pathogenic bacteria, viruses, and protozoa.

One of the microorganisms that can be found in food and poses threat to animals life is the Escherichia coli. Escherichia is a bacteria. Naturallyy, the Escherichia coli can be found in animals(including humans) intestines. So, some kinds might be harmless.

While some are poisonous and cause food poisoning. Some of the symptoms include: pneumonia, diarrhea, respiratory illness and so on.

Which of the following expands to fill the container it is in, but can be compressed to a smaller volume when pressure is applied

Answers

It would be neon gas, but you might want to put the choices next time you ask. Hope I helped u!
Oxygen gas because the gas can expand and compress when pressure is applied. :)

2.6 g of oxygen gas react with excess hydrogen gas to produce 2.4 g water. What is the percent yield? A. 63% B. 83% C. 160% D. 46%

Answers

A
because you add it all and divide

Answer:

The answer is 83

Explanation:

I took a quiz and 63 was wrong and it was 83

Treatment of an alpha,beta-unsaturated ketone with basic aqueous hydrogen peroxide yields an epoxy ketone. the reaction is specific to unsaturated ketones; isolated alkene double bonds do not react. on a sheet of paper, write a mechanism for the alkene to epoxide reaction. then, in the window below, draw the first intermediate in your mechanism.

Answers

The reaction mechanism for an alpha,beta-unsaturated ketone to react with basic peroxide to form an epoxide is shown below with a general ketone. The basic hydroxide is used to deprotonate the peroxide molecule to create a strong HOO- nucleophile. The peroxide then attacks the beta-carbon of the alkene and this pushes the electrons up to the oxygen of the carbonyl. This is the first intermediate that is formed during this reaction.

After the intermediate is formed, the lone pair from the oxygen pushes back down to form the carbonyl once more and this breaks a carbon-carbon bond which attacks the oxygen of the peroxy group, ultimately substituting an -OH group and forming the final epoxide ketone product.

The rate of disappearance of hbr in the gas phase reaction 2hbr(g)→h2(g)+br2(g) is 0.140 m s-1 at 150°c. the rate of appearance of h2 is ________ m s-1.

Answers

Answer: 0.070 m/s

Explanation:

1) balanced chemical equation:

given: 2HBr(g) → H2 (g)+Br2(g)

2) Mole ratios:

2 mol HBr : 1 mol H2

3) That means that every time  2 moles of HBr disappear 1 mol of H2 appears.

That is, the H2 appears at half rate than the HBr disappears.

∴ rate of appearance of H2 = rate of disappearance of HBr / 2 = 0.140 m/s / 2 =  0.070 m/s, which is the answer.

The reaction rate is the rate at which reactants convert to the product. The rate of appearance of hydrogen is [tex]\bold{ 0.070 ms^-^1}[/tex]

The given reaction,

[tex]\bold { 2HBr(g) \rightarrow H_2 (g)+Br_2(g)}[/tex]

2 moles of HBr degrade to form 1 mole of Hydrogen and 1 mole of bromine.

The rate of disappearance of HBr = 0.140 m [tex]\bold {s^-^1}[/tex]

Since the molar ratio between HBr and Hydrogen is  2:1.

So,

[tex]\bold{Ra(H_2) = \dfrac {Rd(HBr)} {2}}[/tex]

Where,

[tex]\bold{Ra(H_2)}[/tex] - Rate of appearance of Hydrogen

[tex]\bold{ Rd(HBr)}[/tex]- Rate of disappearance of HBr

Put the value,

[tex]\bold{Ra(H_2) = \dfrac {Rd(HBr)} {2}}\\\\\bold {Ra(H_2) = \dfrac {0.140 m/s} {2}}\\\\\bold { Ra(H_2) = 0.070 ms^-^1}[/tex]

Therefore, the rate of appearance of hydrogen is [tex]\bold{ 0.070 ms^-^1}[/tex].

To know more about the rate of reaction,

https://brainly.com/question/3334857

A 50.0 −mL sample of 1.50×10−2 M Na2SO4(aq) is added to 50.0 mL of 1.28×10−2 M Ca(NO3)2(aq). What percentage of the Ca2+ remains unprecipitated?

Answers

when we have Ksp CaSO4 = 9.1x10^-6 so by substitution in Ksp formula:
Ksp CaSO4 = [Ca+2][SO4] 
1.9x10^-6   = [Ca+2][1.5x10^-2]
∴ [Ca+2] M in the solution =1.27x10^-4
when percent remaining = [Ca in solution]/[C original value] * 100
                                          = [(1.27x10^-4*(50ml+50ml)]/[1.28x10^-2*50ml]*100
                                          ≈ 2%
Final answer:

To determine the percentage of Ca2+ that remains unprecipitated, calculate the moles of Ca2+ and SO4^2- and use the limiting reagent to find the remaining Ca2+. Finally, use this value to calculate the percentage.

Explanation:

To determine the percentage of Ca2+ that remains unprecipitated, we first need to calculate the moles of Ca2+ and SO42- in the solution.

The moles of Ca2+ can be calculated using the formula Molarity (M) = Moles (mol) / Volume (L). Once the moles of Ca2+ and SO42- are known, we can determine which ion is the limiting reagent and calculate how much of the other ion remains unprecipitated.

The formula for the percentage of the Ca2+ that remains unprecipitated is: (Moles of Ca2+ that remains unprecipitated / Initial moles of Ca2+) x 100%.

Learn more about Precipitation here:

https://brainly.com/question/18109776

#SPJ3

Is the Hertzsprung-Russell diagram still a valid instrument in studying stars, given that it is over 100 years old?

Answers

Answer:

Yes.

Explanation:

Hello,

As long as it shows important relationships between the size and color of stars, age wouldn't affect observation and measurement but will just provide more accurate results but the method is still valid.

Best regards.

Answer:

Yes.

Explanation:

Which element's atomic radius increases the most in size when it becomes ionized? A. Sodium B. Chlorine C. Fluorine D. Lithium

Answers

I am thinking Chlorine

I WILL GIVE U BRAINLEST !!!!!!!!!!!!!!




Which part of a watershed is at the lowest elevation?


A.
divide


B.
boundary


C.
basin


D.
collection area

Answers

Another word for "watershed" is drainage basin - it refers to all the land that will end in the same river and it's separated from land which will provide water for other rivers (but sometimes this separation is also called watershed- this can be confusing!)
so the correct answer isan area where all water drains into the same river system
so D

In an ecosystem, collection area is a part of a watershed which  is at the lowest elevation.

What is an ecosystem?

An ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the ecosystem through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

An aqueous solution has an h3o+ concentration of 4.4×10-2 m. calculate [oh–] for this solution.

Answers

first   calculate  Ph
Ph=  -log (H3O+)
Ph=-log( 4.4  x10^-2)=  1.4

Ph  +Poh=14
Poh  is  therefore= 14  - 1.4=12.6

Oh-   concentration  is  calculated   as  follows
1 x10^  -POh
that  is  1  x10^-12.6   which  is=  2.5  x10^-13

Is more chemical weathering likely to occur in New York location or in the Illinois location? Explain your answer. HELP NEEDED (Science)

Answers

The pH of pure water is 7.0, which is neutral.

For a pH below this, the water is acidic. Substances that are acidic are often corrosive and thus could cause weather damaging. The pH of the precipitation in NY is below that of the precipitation in IL, and NY receives more precipitation, so for both of those reasons, it is likely to have more chemical weathering.

Which acid is the strongest? pH = 0.5 pH = 2.0 pH = 3.5 pH = 5

Answers

pH = 0.5 would be the most acidic because the lower it is on the pH scale the more acidic it is.

Answer:

The most acidic or strongest acid is with pH equal to 0.5

Explanation:

The pH of the solution is defined as negative logarithm of [tex]H^+[/tex] concentration.

Mathematically can written as:

[tex]pH=-\log[H^+][/tex]

[tex]pH\propto \frac{1}{[H^+]}[/tex]

From the above expression we can see that pH of the solution is inversely related to the concentration of the [tex]H^+[/tex] ions.

This means that higher the concentration of [tex]H^+[/tex] ions in the solution higher will be pH and more acidic will be the solution.

So, from the given option the most acidic or strongest acid is with pH equal to 0.5 because the concentration [tex]H^+[/tex] ions is highest in this solution with respect to other solutions.

what kind of element has the greatest tendency to attract electrons?why?

Answers

The kind of element that has the greatest tendency to attract electrons are inert gases or noble gases, in the right side of the periodic table. It is because the nuclear charge is bigger for the elements in the right side of the periodic table, and inert gases or noble gases' atom is the best to attract electrons. 

The elements which has the greatest tendency to attract electrons are more electronegative. Elements like halogens, oxygen, nitrogen etc. are the most electronegative elements which easily attracts electrons.

What is electronegativity?

The ability of an atomic nucleus to attracts its electrons and the bonded pair of electrons is called electronegativity. From left to right in periodic table electronegativity increases from metals to non-metals.

As the electronegativity increases, ionization energy of elements increases. Elements which are deficient of electrons needs to gain electrons to attain stability. According to octet law, as the valence shell fills 8 electrons the atom becomes stable.

Thus, the elements  bonds with other elements to attain electrons for filling their octet. The more electronegative atoms attracts the bonded pair of electrons towards it and acquire a partial negative charge.

Halogens are more electronegative since they have seven valence electrons and thus need only one electron to attain octet. Thereby, there will be more tends to attract one electron. Similarly, oxygen, sulphur, nitrogen etc. are electronegative elements.

To find more on electronegativity, refer here:

https://brainly.com/question/17762711

#SPJ2

How is graphite different from other allotropes of carbon?

A. Graphite forms only from carbon atoms, without other atoms mixed in.
B. The carbon atoms in graphite are arranged randomly, without a crystalline
structure.
C. The carbon atoms in graphite are arranged in widely spaced layers.
D. The carbon atoms in graphite are packed extremely densely and tightly.

Answers

A or B I am believe it might be A though

Answer:

C. The carbon atoms in graphite are arranged in widely spaced layers.

Explanation:

Allotropes are different structural forms of the same element that exist is the same physical state. In other words, they differ in their bonding arrangement.

Carbon has two allotropes: diamond and graphite.

In diamond each C atom is sp3 hybridised and is bonded to 4 other C atoms forming a tetrahedral unit which extends into a crystalline network. In contrast, each C atom in graphite is sp2 hybridised and bonded to 3 other carbon atoms in a crystalline hexagonal layer like structure.

Thus, the carbon atoms in graphite are arranged in widely spaced layers.

What is the name of this hydrocarbon

Answers

Depending on the strictness of your teacher you can name it as either of the following:
2-methyl-propane or iso-propane

Answer : The name of the given hydrocarbon is, 2-methylpropane.

Explanation :

The basic rules for naming of organic compounds are :

First select the longest possible carbon chain.For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.A suffix '-ane' is added at the end of the name of alkane.If two of more similar alkyl groups are present, then the words 'di', 'tri' 'tetra' and so on are used to specify the number of times these alkyl groups appear in the chain.

In the given hydrocarbon, the longest possible carbon chain number is 3 that means we add prefix 'prop' and suffix '-ane' and a substituent present at 2nd position of the longest carbon chain. So, the name of given hydrocarbon will be, 2-methylpropane.

Hence, the name of the given hydrocarbon is, 2-methylpropane.

Other Questions
The uniform bar of mass m and length l is balanced in the vertical position when the horizontal force p is applied to the roller ata. determine the bar's initial angular acceleration and the acceleration of its top pointb. Is this statement true or false, the law of conservation of mass states that in any chemical or physical change, energy is not created or destroyed Someone please help me find x and y for problems #19 and 20!!! Please explain if you can An important difference between waves and classical particles is that A.waves cannot interfere. B.particles cannot interfere. C.waves can only interfere destructively. D.particles can only interfere destructively. David is preparing a report to show the percentage increase in population in the United States in The Last 5 Years which feature of a word processing program should David use to present this data Which work environment and personality type does monica belong to? I REALLY, REALLY NEED HELP ON THIS QUESTION!!!!!!!! 100 POINTS!!!!!!!!! WILL GIVE THE BRAINLIEST TO CORRECT ANSWER!!!!!!!!!!!!!______________________________________________________only do the second one! Look at the picture! iT IS THE ONE IN THE diamond chart!*******If you don't answer with correct answers or give something absurd or don't give enough details, your answer WILL BE REPORTED AND DELETED AND YOU WILL LOSE THE POINTS FOR THIS QUESTION!!!!! What happens during diffusion? responsesa. particles move from an area that is more concentrated to an area that is less concentrated.b. particles move from an area that is less concentrated to an area that is more concentrated.c. particles move to different areas but always return to their starting point.d. particles move slightly but stay in almost the same place? PLZ HELP QUICKLY AND CORRECT GETS BRAINLY!Solve for x: 3|x 3| = 6 Technological progress has reduced the cost of manufacturing mp3 players. what happens if demand is unchanged? Emanuel jones, 60 years of age, is male patient diagnosed with small cell carcinoma. he underwent surgery in the past to remove the left lower lobe of his lung. he is receiving chemotherapy. two weeks before a round of chemotherapy, a complete blood count with differential, and a renal and metabolic profile are obtained for the patient. the patient presents to the oncology clinic for chemotherapy with a temperature of 101f. further assessment reveals decreased breath sounds in the What is the definition of clemency as it relates to a judicial process? A.mercy that can be shown to people B.mercy shown to businesses violating tax laws C.mercy shown to convicted prisoners D.mercy shown to the children of criminals Based on the given information, choose the abbreviation of the postulate that supports the conclusion that WAS NOT.AHH! HELP!!If the conclusion cannot be drawn from the given information, then choose "not possible."Given:WS = NT, AS = OT, S = T. A toll bridge charges $1.00 for passenger cars and $2.50 for other vehicles. suppose that during daytime hours, 60% of all vehicles are passenger cars. if 25 vehicles cross the bridge during a particular daytime period, what is the resulting expected toll revenue? hint: let ???? = the number of passenger cars out of 25. start by identifying the type of discrete random variable ???? is. then, create a linear function of ???? to represent the toll revenue. finally, find the expected value of the function that represents the toll revenue. In response to very high demand, a basketball jersey has been marked up by 25% and is now selling for $95.00. How much was the jersey before the mark-up? During a basketball game, the East Middle School Tigers scored 42 points from two-point baskets. How many two-point baskets did they make?84142142 Which statement best describes how to determine whether f(x) = x3 + 5x + 1 is an even function? La camarera te sirvi el plato de pasta con mariscos. isabel nos trajo la sal y la pimienta a la mesa. javier me pidi el aceite y el vinagre anoche. el dueo nos busca una mesa para seis personas. tu madre me consigue unos melocotones deliciosos. te recomendaron este restaurante lola y paco? a picture of a school mascot is 18 in. Wide and 24 in. Long. It is enlarged proportionally to banner size. If the width is enlarged to 63 in., what is the length of the banner? What is the relationship between colonialism and the way language is used in the Tempest?