If the atmospheric pressure is 0.975 atm what is the pressure of the enclosed gas

1/8 when using usatestprep

Answer : The balanced chemical reaction will be,

[tex]2HNO_3(aq)+K_2SO_3(aq)\rightarrow K_2SO_4(aq)+H_2O(l)+2NO_2(g)[/tex]

Explanation :

Balanced chemical equation : It is defined as the number of atoms of individual elements present on reactant side must be equal to the product side.

When the nitric acid react with potassium sulfite to give potassium sulfate, water and nitrogen dioxide.

Thus, the balanced chemical reaction will be,

[tex]2HNO_3(aq)+K_2SO_3(aq)\rightarrow K_2SO_4(aq)+H_2O(l)+2NO_2(g)[/tex]

The balanced chemical equation is as follows:

[tex]\boxed{{\text{2HN}}{{\text{O}}_{\text{3}}}\left( {aq} \right) + {{\text{K}}_2}{\text{S}}{{\text{O}}_3}\left( {aq} \right) \to {{\text{K}}_2}{\text{S}}{{\text{O}}_4}\left( {aq} \right) + 2{\text{N}}{{\text{O}}_{\text{2}}}\left( g \right) + {{\text{H}}_{\text{2}}}{\text{O}}\left( l \right)}[/tex]

The phase of [tex]{{\mathbf{K}}_{\mathbf{2}}}{\mathbf{S}}{{\mathbf{O}}_{\mathbf{4}}}[/tex] is [tex]\boxed{{\mathbf{aqueous}}}[/tex], [tex]{\mathbf{N}}{{\mathbf{O}}_{\mathbf{2}}}[/tex] is [tex]\boxed{{\mathbf{gas}}}[/tex] and [tex]{{\mathbf{H}}_{\mathbf{2}}}{\mathbf{O}}[/tex] is [tex]\boxed{{\mathbf{liquid}}}[/tex].

Further Explanation:

The chemical reaction that contains equal number of atoms of the different elements in the reactant as well as in the product side is known as balanced chemical reaction. The chemical equation is required to be balanced to follow the Law of the conservation of mass.

The steps to balance a chemical reaction are as follows:  

Step 1: Complete the reaction and write the unbalanced symbol equation.

In the given reaction, [tex]{\text{HN}}{{\text{O}}_{\text{3}}}[/tex] reacts with [tex]{{\text{K}}_2}{\text{S}}{{\text{O}}_3}[/tex] to form [tex]{{\text{K}}_2}{\text{S}}{{\text{O}}_4}[/tex], [tex]{\text{N}}{{\text{O}}_{\text{2}}}[/tex] and [tex]{{\text{H}}_{\text{2}}}{\text{O}}[/tex]. The physical state of [tex]{{\text{K}}_2}{\text{S}}{{\text{O}}_4}[/tex] is aqueous, [tex]{\text{N}}{{\text{O}}_{\text{2}}}[/tex] is gas and [tex]{{\text{H}}_{\text{2}}}{\text{O}}[/tex] is liquid. The unbalanced chemical equation is as follows:

[tex]{\text{HN}}{{\text{O}}_{\text{3}}}\left( {aq} \right) + {{\text{K}}_2}{\text{S}}{{\text{O}}_3}\left( {aq} \right) \to {{\text{K}}_2}{\text{S}}{{\text{O}}_4}\left( {aq} \right) + {\text{N}}{{\text{O}}_{\text{2}}}\left( g \right) + {{\text{H}}_{\text{2}}}{\text{O}}\left( l \right)[/tex]

Step 2: Then we write the number of atoms of all the different elements that are present in a chemical reaction in the reactant side and product side separately.(Refer table in the attached image)

Number of hydrogen atoms is 1.

Number of nitrogen atoms is 1.

Number of oxygen atoms is 6.

Number of potassium atoms is 2.

Number of sulfur atoms is 1.

Number of hydrogen atoms is 1.

Number of nitrogen atoms is 1.

Number of oxygen atoms is 6.

Number of potassium atoms is 2.

Number of sulfur atoms is 1.

Step 3: Initially, we try to balance the number of other atoms of elements except for carbon, oxygen, and hydrogen by multiplying with some number on any side. The other elements except oxygen and hydrogen are balanced.

Step 4: After this we balance the number of atoms of oxygen followed by hydrogen atoms. To balance the number of atoms of oxygen and hydrogen, we have to multiply [tex]{\text{HN}}{{\text{O}}_{\text{3}}}[/tex] by 2, [tex]{\text{N}}{{\text{O}}_{\text{2}}}[/tex] by 2. The chemical equation is as follows:

[tex]{\text{2HN}}{{\text{O}}_{\text{3}}}\left( {aq} \right) + {{\text{K}}_2}{\text{S}}{{\text{O}}_3}\left( {aq} \right) \to {{\text{K}}_2}{\text{S}}{{\text{O}}_4}\left( {aq} \right) + 2{\text{N}}{{\text{O}}_{\text{2}}}\left( g \right) + {{\text{H}}_{\text{2}}}{\text{O}}\left( l \right)[/tex]

Step 5: Finally, we check the number of atoms of each element on both the sides. If the number is same then the chemical equation is balanced. The balanced chemical equation is as follows:

[tex]{\text{HN}}{{\text{O}}_{\text{3}}}\left( {aq} \right) + {{\text{K}}_2}{\text{S}}{{\text{O}}_3}\left( {aq} \right) \to {{\text{K}}_2}{\text{S}}{{\text{O}}_4}\left( {aq} \right) + {\text{N}}{{\text{O}}_{\text{2}}}\left( g \right) + {{\text{H}}_{\text{2}}}{\text{O}}\left( l \right)[/tex]

Learn more:

1.  Balanced chemical equation https://brainly.com/question/1405182

2. How to calculate moles of the base in given volume https://brainly.com/question/4283309

Answer details:

Grade: High School

Subject: Chemistry

Chapter: Chemical reaction and equation

Keywords: Balancing, HNO3, K2SO4, K2SO3, NO2, H2O, phases, physical state, solid, liquid, gas, aqueous, law of conservation of mass.

The balanced equation for the reverse reaction would be

[tex]2SO_3 (g) < ----- > 2SO_2 (g) + O_2 (g)[/tex]

They are reactions that proceed in opposing directions - that is, reactants to products and vice versa.

The equilibrium system between sulfur dioxide gas, oxygen gas, and sulfur trioxide gas can be represented as:

[tex]2SO_2 (g) + O_2 (g) < --- > 2SO_3 (g)[/tex]

Thus, the reverse reaction would be:

[tex]2SO_3 (g) < ----- > 2SO_2 (g) + O_2 (g)[/tex]

More on equilibrium reactions can be found here: https://brainly.com/question/11114490

The equilibrium system between sulfur dioxide gas, oxygen gas, and sulfur trioxide gas is given. Write the balanced chemical equation for the reverse reaction. Include physical states for all species.

the answer is A and C

Which of these substances most likely dissolve in water? Check all that apply

The total number of valence electrons in the Lewis structure of SEF2O is calculated by adding the valence electrons of each atom, giving us a total of 26 electrons.

The total number of valence electrons in the lewis structure of SEF2O can be calculated by adding up the valence electrons in each atom. Selenium (Se) has 6 valence electrons, each Fluorine (F) has 7 (so that's 14 for 2 Fluorines), and Oxygen (O) also has 6. So, the total number of valence electrons in SEF2O is 24+2 = 26.

https://brainly.com/question/35566230

#SPJ6

The total number of valence electrons in the Lewis structure of SeF2O is 26.

The Lewis structure of SeF2O consists of a central Se atom bonded to two F atoms and one O atom. To determine the total number of valence electrons, we need to add up the valence electrons of each particle. She has six valence electrons, each F atom has seven valence electrons, and O has six valence electrons. Therefore, the total number of valence electrons in the Lewis structure of SeF2O is 6 (Se) + 2(7) (F) + 6 (O) = 26.

https://brainly.com/question/28977387

#SPJ3

The energy due to the random motion of water molecules in a tank is thermal energy, which is related to the temperature of the water and can be transferred as heat.

The form of energy that water has due to the random motion of its molecules is called thermal energy. This energy arises from the kinetic energy that is present in the random microscopic motions of the water molecules. When these molecules move, collide, and bounce off each other, the average kinetic energy of these motions correlates with the temperature of the water. Furthermore, thermal energy can be transferred between objects or systems through processes like conduction, convection, and radiation, at which point it is commonly referred to as heat energy.

Answer: Option (a) is the correct answer.

Explanation:

Molar mass is defined as the mass in grams of one mole of a substance.

Mathematically,       Molar mass = [tex]\frac{mass in grams}{moles of substance}[/tex]

For example, molar mass of 1 mole of [tex]CH_{4}[/tex] molecule will be calculated as follows.

             Molar mass of [tex]CH_{4}[/tex] = [tex]mass of carbon atom + 4 \times mass of hydrogen atom[/tex]

                                 = [tex]12 + 4 \times 1[/tex]

                                 = 16 g

Therefore, 1 mole of [tex]CH_{4}[/tex] molecules has a molar mass of 16 g.

Answer: Option (B) is the correct answer.

Explanation:

A metal that tends to combine with two or more metal elements in order to gain strength or durability etc is known as an alloy.

For example, an alloy of steel contains elements like manganese, silicon, nickel, titanium, copper etc.

Some properties of alloys of steel are as follows.

Hence, we can conclude that all the given options are true about alloy steel chains.

\Final answer:

A thermometer reading off by 1.5 °C would significantly impact the accuracy of experimental results by overestimating temperature values, potentially leading to incorrect conclusions in experiments that require precise temperature measurements.

Explanation:

If your thermometer is off by 1.5 °C, meaning it reads values that are 1.5 °C higher, this discrepancy would significantly affect the accuracy of your experimental results. This error would lead to consistently overestimated temperature readings, causing potential misinterpretations of the outcomes. For example, in experiments where precise temperature control and measurement are crucial, such as in testing product formulations or determining chemical reaction rates, an inaccurate thermometer could lead to incorrect assessments of these processes.

In laboratory settings, accurate temperature measurement is pivotal for ensuring the validity of experimental results. An error of 1.5 °C could not only impact the interpretation of a single experiment but also compound in experiments relying on precise temperature measurements to gauge reactions or behaviors, thereby misleading conclusions and potentially invalidating the experiment's purpose. Moreover, in cases like accelerated shelf life testing, a small temperature discrepancy could result in significant errors in the estimated product shelf life, underscoring the importance of using accurately calibrated equipment. Examples include estimating expiry dates based on the stability of products at increased temperatures where a minor measurement error could drastically skew the results. Hence, ensuring that laboratory equipment, especially thermometers, are correctly calibrated is essential for experimental integrity and accuracy.

Answer:

311.6g NaCl you should add

Explanation:

When you add a solute (NaCl) to solvent (Water), the freezing point of the solution decreases with regard to pure solvent following the equation:

ΔT = Kf × m × i

Where ΔT is change in temperature(From 0°C to -13.4°C), Kf is freezing point depression constant (1.86°C/m for water), m is molality of solution (Moles solute / 1.48 kg solvent -Because 1.48L≡1.48kg; density 1.00g/mL-) and i is Van't Hoff factor (2 for NaCl because in water, NaCl dissociates as Na⁺ and Cl⁻ ions, 2 ions).

Replacing:

13.4°C = 1.86°C/m × moles NaCl / 1.48kg × 2

5.33 = moles NaCl

As molar mass of NaCl is 58.44g/mol, mass in 5.33moles are:

5.33mol NaCl × (58.44g /mol) = 311.6g NaCl you should add

Answer: Enriched uranium is the fuel source.

The nuclear power plants utilizes the radiation energy from the fission of the heavy molecular weight atomic particles. These radiations can cause damage when exposed to the external air, they are capable of causing explosion, mutation in the living beings. Therefore, safety measures should be taken to prevent the damages.

Enriched uranium is the fuel source is not the precaution taken at the nuclear power plant to ensure safety because it is just explaining the fact that the uranium is the source of radiation. All other factors such as safety systems are built into them, all parts are kept in good repair and processes are carefully monitored are relevant precautions.

In an ecosystem, Europe is the country on map which will experience  a warmer climate due to a nearby ocean current than it otherwise would.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

Final answer:

The arsenite ion (AsO₃₃⁻) has a total of 26 valence electrons, calculated by adding the valence electrons of arsenic and oxygen and then adding three more electrons to account for the ion's 3− charge.

Explanation:

To determine the total number of valence electrons in the arsenite ion (AsO₃₃⁻), we first count the valence electrons of each atom and then adjust for the charge on the ion. Arsenic (As) is in group 15 of the periodic table and has 5 valence electrons. Each oxygen (O) atom, being in group 16, has 6 valence electrons. There are three oxygen atoms, so:

Adding these together: 5 (As) + 18 (O) = 23 valence electrons. Since the arsenite ion has a 3− charge, we add three electrons to account for the negative charge. So, the total number of valence electrons for AsO₃₃⁻ is:

23 (from atoms) + 3 (from charge) = 26 valence electrons

The pressure of 0.840 atmospheres (atm) can be converted to millimeters of mercury (mm Hg) by using the conversion factor, 1 atm = 760 mm Hg. The result of this conversion is 638.4 mm Hg.

To convert the pressure from atmospheres (atm) to millimeters of mercury (mm Hg), we use the conversion factor of 1 atm = 760 mm Hg. This is a known standard in chemistry and physics. In this case, the conversion will be as follows:

0.840 atm x 760 mm Hg/1 atm = 638.4 mm Hg

Therefore, 0.840 atm is equivalent to 638.4 mm Hg.

https://brainly.com/question/36152804

#SPJ6

KHP has greater water solubility than fatty acids with long hydrocarbon chains due to its polar carboxylate anion that allows for strong hydrogen bonding with water, whereas fatty acids have a hydrophilic region that becomes less significant relative to the hydrophobic chain as the chain length increases, leading to decreased solubility.

The solubility of potassium hydrogen phthalate (KHP) in water is greater than that of fatty acids with six or more carbons mainly due to the difference in the chemical structure and polarity of the molecules. KHP possesses a highly polar functional group (carboxylate anion) that can form strong hydrogen bonds with water molecules, whereas fatty acids have long hydrocarbon chains that exhibit a hydrophobic character and tend to be less soluble in polar solvents like water. As fatty acids increase in chain length, their solubility in water decreases because the proportion of the nonpolar, hydrophobic hydrocarbon chain relative to the polar carboxyl group becomes larger, resulting in weaker interactions with water molecules.

Fatty acids with long chains, such as those with more than eight carbons, are termed amphiphilic or amphipathic. These substances have both hydrophilic (water-attracting) and hydrophobic (water-repelling) regions, which makes them behave differently in water. For instance, fatty acids with ten or more carbon atoms are nearly insoluble in water but can form a monolayer on the water surface, displaying properties characteristic of surfactants.

The higher solubility of KHP in water compared to fatty acids with six or more carbons is due to its ionic nature and the larger proportion of hydrophobic regions in long-chain fatty acids which decrease their solubility.

The higher solubility of potassium hydrogen phthalate (KHP) in water compared to many fatty acids with six or more carbons is attributed to both its ionic nature and structural differences.

KHP is an ionic compound, meaning it dissociates into ions (potassium and hydrogen phthalate ions) in water.

Additionally, KHP contains hydrophilic groups like the carboxylate group, which further enhance its solubility by forming hydrogen bonds with water molecules.

Therefore, the combination of KHP's ionic nature and its structural features that promote interactions with water molecules explains why it exhibits higher solubility in water compared to many fatty acids with longer carbon chains

Answer: The empirical formula is [tex]C_{3}H_{3}O_1[/tex]  

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of C = 65.5 g

Mass of H = 5.5 g

Mass of O = 29.0 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{65.5g}{12g/mole}=5.5moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{5.5g}{1g/mole}=5.5moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{29g}{16g/mole}=1.8moles\approx 1moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{5.5}{1.8}=3[/tex]

For H = [tex]\frac{5.5}{1.8}=3[/tex]

For O =[tex]\frac{1.8}{1.8}=1[/tex]

The ratio of C : H  : O= 3: 3: 1

Hence the empirical formula is [tex]C_{3}H_{3}O_1[/tex]