If velocity is positive, which would most likely yield a negative acceleration?
Afinal velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.

Answers

Answer 1

Answer:

an initial velocity that is faster than the final velocity

Explanation:

please like and Mark as brainliest

Answer 2

Answer:

C

Explanation:


Related Questions

Why doesn't clouds formation take place until the dew point temperature is reached

Answers

Answer:

Clouds form when air reaches its dew point, the temperature when the air is saturated. This can happen in two ways. First, the air temperature can stay the same while the humidity increases. This is common in locations that are warm and humid.

Read more on Brainly.com - https://brainly.com/question/3946379#readmore

Explanation:

Final answer:

Clouds form when the air temperature cools to the dew point, causing water vapor to condense into liquid droplets around condensation nuclei. Without reaching this temperature, the air cannot saturate and clouds will not form. Understanding dew point is essential for predicting weather conditions.

Explanation:

Cloud formations occur in the atmosphere when the air temperature cools to the dew point, the temperature at which water vapor present in the air begins to condense into liquid water droplets, forming clouds. The air must reach saturation, which can happen either by adding moisture through evaporation or by cooling the air until it can no longer hold the water vapor, causing condensation.

Clouds may form due to contact cooling or uplift mechanisms, where air rises, expands, and cools. Condensation also necessitates the presence of condensation nuclei such as dust or smoke particles, around which moisture droplets can form. The importance of dew point lies in its role in forecasting weather; when the air temperature drops to the dew point, latent heat is released, stopping the temperature from falling further, and possibly leading to precipitation if clouds are formed.

how does coal convert to electrical energy?

Answers

Answer:

Coal-fired plants produce electricity by burning coal in a boiler to produce steam. The steam produced, under tremendous pressure, flows into a turbine, which spins a generator to create electricity. The steam is then cooled, condensed back into water and returned to the boiler to start the process over.

Explanation:

What is energy?

-The ability to do work or cause change
-Anything that has mass and takes up space
-Substances bonded together
-Both a and b

Answers

Answer:

Both a and b

Hope this answer helps you

Final answer:

Energy is the ability to do work or cause change and comes in many forms like mechanical, electrical, kinetic, and potential. It is a fundamental concept in physics, involving the transfer and conservation of energy in various processes.

Explanation:

What is Energy?

Energy is a fundamental concept in physics, often defined as the capacity to do work or cause change. The scientific concept of work corresponds to applying a force over a distance, like pushing a heavy object across the floor or lifting a weight. Energy can also be transferred and recognized in other forms, such as heat or light. There are various forms of energy, such as mechanical, electrical, kinetic, and potential energy. For instance, when inflating a bicycle tire, we do work by moving air against the resistance of the air already in the tire, exemplifying mechanical work.

In a broader sense, energy enables the movement of matter and the execution of actions, and it is conserved in physical processes, converting from one form to another but never disappearing.

Hot tubs generally contain water at a temperature of 38°C to keep the water clean several solid solute's are dissolved in the water . Many hot tub manufacturers warn that if the water gets too cold it will get cloudy and Fill with a fine solid why?

Answers

Answer:

Because allowing the water to get too cold implies that some precipitate will be formed.

Explanation:

If you allow the hot tub to cool down, there will be a reduction in the solubility of the solutes. In this light, if its then get too could, the solubility of the solutes will be so low in such a way that it becomes inevitable that some of the solute must then leave the solution, hence creating a precipitate which is the fine solid that has been mentioned in the question.

Final answer:

In hot tubs, a drop in water temperature leads to decreased solubility of solutes, causing precipitation and cloudiness. The human body's natural cooling mechanisms are not effective in 40°C water, as sweating does not cool the body underwater and heat cannot be transferred to the hotter surrounding water.

Explanation:

Hot tubs are often equipped with water at a temperature of around 38°C to maintain hygienic conditions, since the heat assists with dissolving various solid solutes that keep the water clear. If the water temperature drops, the solubility of these solutes decreases, leading to a precipitation of solid particles, which causes the water to appear cloudy and fill with a fine solid. This effect is due to the dependence of solubility on temperature; as the water cools, it is less able to hold the dissolved solutes in solution.

When our bodies are immersed in a hot tub with water at 40.0°C, physiological responses such as sweating and increased blood circulation to the skin's surface occur to dissipate excess heat. However, this has little cooling effect in the hot tub scenario because sweating does not lead to evaporative cooling underwater, and the hot tub's water temperature being above typical human body temperature means that the body cannot effectively transfer heat to the surroundings.

how many moles of glucose are in 19.1 g of glucose

Answers

Answer:

There are 0,106 mol of glucose in 19,1g.

Explanation:

First we calculate the weight of 1 mole of Glucose whose molecular formula is C6 H12 0 6, with the atomic weights of each element obtained from the periodic table. Then, by means of a simple rule of three we calculate the moles that are in 19.1 grams:

Weight 1 mol C6H1206 = (Weight C)x 6 + (Weight H)x12 + (Weight 0)x6=

                                       = 12 g x 6 + 1g x12 + 16 g x 6= 180 g/mol

180 g ----1 mol glucose

19,1 g-----x= (19,1 g x 1 mol glucose)/ 180 g= 0,106 mol

Final answer:

To find the number of moles of glucose in 19.1 grams, divide the mass by the molar mass of glucose (180 g/mol), resulting in approximately 0.106 moles.

Explanation:

The student's question is about determining the number of moles of glucose in a given mass of glucose. To calculate this, we need to use the molar mass of glucose, which is 180 g/mol. The mass of glucose given is 19.1 grams.

To find the number of moles, we use the formula:

Number of moles = mass (g) / molar mass (g/mol)

So for glucose, it would be:

Number of moles of glucose = 19.1 g / 180 g/mol

Calculating this gives us:

Number of moles of glucose = 0.106 moles (rounded to three decimal places)

What is the concentration of 60 mL of H3PO4 if it is neutralized by 225 mL of 2 M Ba(OH)2?

Answers

7.5 M is the concentration of 60 ml of H3PO4 if it is neutralized by 225 ml of 2 M Ba(OH)2.

Explanation:

Data given:

volume of phosphoric acid, Vacid =60 ml

volume of barium hydroxide, Vbase = 225 ml

molarity of barium hydroxide, Mbase = 2M

Molarity of phosphoric acid, Macid =?

the formula for titration is used as:

Macid x Vacid = Mbase x Vbase

rearranging the equation to get Macid

Macid = [tex]\frac{Mbase x Vbase}{Vacid}[/tex]

Macid =[tex]\frac{225 X 2}{60}[/tex]

Macid = 7.5 M

the concentration of the phosphoric acid is 7.5 M and the volume is 60 ml. Thus 7.5 M solution of phosphoric acid is used to neutralize the barium hydroxide solution of 2M.

Answer:

= 5 M

Explanation:

2H3PO4 + 3Ba(OH)2 ----> Ba3(PO4)2 + 3H2O

moles Ba(OH)2 = molarity x litres

= 2 M x 0.225 L

= 0.45 mol

3 moles Ba(OH)2 react with 2 moles H2SO4

So moles H2SO4 = 2/3 x moles Ba(OH)2

= 0.3 mol

molarity = moles / litres

= 0.3 mol / 0.06 L

=5M

Almost all of the lakes found in Texas are/were:

Answers

Answer:

B. created by man made dams

Explanation:

I live in Texas

Answer:

B. created by man made dams

Explanation:

I had this question pls mark brainliest

Describe a pi bond. Group of answer choices overlap of two d orbitals side by side overlap of p orbitals end to end overlap of p orbitals p orbital overlapping with an f orbital s orbital overlapping with the end of a d orbital

Answers

Answer:    side by side overlap of two p orbital---B

Explanation: pi bonds denoted by Greek letter , π are covalent chemical bond where there is a  side-by-side overlap of two p orbitals laterally illustrated by when two lobes of an orbital on one atom overlap two lobes of an orbital on the other atom.

At the shared nodal plane of the overlapping orbitals, there exists an electron density which is equal to zero which also serves as a nodal plane for the molecular orbital of the pi bond. Double and triple bonds contain one sigma bond with one or two pi bonds between atoms.

A pi bond (π bond) is formed by the side-by-side overlap of two p orbitals, creating areas of orbital overlap on opposite sides of the internuclear axis with a nodal plane where no electrons can be found. Pi bonds are significant in molecular chemistry, particularly in unsaturated hydrocarbons and other molecules with multiple bonds.

A pi bond (π bond) is a type of covalent bond that is formed by the side-by-side overlap of two p orbitals. This overlap occurs in a manner such that the regions of orbital overlap are situated on opposite sides of the internuclear axis, which is the line running directly between the nuclei of the bonding atoms. In addition, within a pi bond, there exists a nodal plane along the internuclear axis, which means there is a plane with zero probability of finding an electron.

In molecular structures, pi bonds are significant because they contribute to the bonding interactions that occur in addition to sigma bonds, which are formed by end-to-end overlap of orbitals. It is important to note that pi bonds provide molecular systems with additional stability and are typically found in unsaturated hydrocarbons such as alkenes and alkynes, as well as in many other types of molecules with multiple bonds between atoms.

What is carrying capacity?


A: the maximum number of species that can live together in an area

B: the maximum population that can be supported in an area

C: the maximum population that can reproduce in an area

D: the maximum number of predators that live in an area

the answer is B

Answers

Answer:

its b I believe of it's not sorry

Answer:the answer is b

Explanation:

Dioxin is a by-product of various industrial chemical processes. It is suspected of causing cancer and birth defects in both humans and other animals. Apparently, it acts by entering cells and binding to proteins, altering the pattern of gene expression. Therefore, it is reasonable to propose that dioxin acts by mimicking _____.

Answers

Answer:

The answer to the given question is: dioxin acts by mimicking the role of transcription factors.

Explanation:

Dioxin acts by mimicking the action of regulatory proteins that influence the binding of RNA polymerase to a promoter.

Transcription occurs in the three steps—initiation, elongation, and termination. Transcription factors are proteins that controls the rate of transcription of genetic information from DNA to messenger RNA, by binding to a specific DNA sequence. Transcription factors are directly involved in regulating gene expression.

Transcription factors are a very diverse family of proteins and generally function in multi-subunit protein complexes.

Dioxins are unwanted by-products of a wide range of manufacturing processes that are harmful to health. They can cause problems with reproduction, development, and the immune system. They can also disrupt hormones and lead to cancer.

Dioxins have no common uses. They are manufactured on a small scale for chemical and toxicological research.

Dioxins are absorbed into the human body through the digestive and respiratory tracts or through skin contact. They are then distributed throughout the body. Once dioxins enter the body, they last a long time because of their chemical stability and their ability to be absorbed by fat tissue.

The highest levels of dioxins are found in some soils, consumer products such as; cigarettes, pesticides, and herbicides,  sediments and food, especially fatty foods such as meat, poultry, seafood, milk, egg and their products.

Dioxin is a by-product of various industrial chemical processes. It is suspected of causing cancer and birth defects in both humans and other animals. Apparently, it acts by entering cells and binding to proteins, altering the pattern of gene expression. Therefore, it is reasonable to propose that dioxin acts by mimicking the role of transcription factors.

Dioxin acts by mimicking the action of regulatory proteins that influence the binding of RNA polymerase to a promoter.

Transcription occurs in the three steps—initiation, elongation, and termination. Transcription factors are proteins that controls the rate of transcription of genetic information from DNA to messenger RNA, by binding to a specific DNA sequence. Transcription factors are directly involved in regulating gene expression.

Transcription factors are a very diverse family of proteins and generally function in multi-subunit protein complexes.

Dioxins are unwanted by-products of a wide range of manufacturing processes that are harmful to health. They can cause problems with reproduction, development, and the immune system. They can also disrupt hormones and lead to cancer.

To know more about dioxin here

https://brainly.com/question/13511189

#SPJ12

why does a perfume bottle burst when placed inside the flame​

Answers

Answer:

It's because the perfume bottle contains ethyl alcohol.

It is because perfume has ethyl alcohol

do all metal oxides produce alkaline solutions? explain why or why not?

Answers

Answer:

Forming acids and alkalis. Soluble metal oxides (or metal hydroxides) produce alkaline solutions. Soluble non-metal oxides produce acidic solutions. Insoluble oxides will not affect the pH of water.

Explanation:

Final answer:

While most metal oxides form basic solutions by reacting with water, this is not universal; some metal oxides, particularly those with higher oxidation states, can be amphoteric or acidic and do not produce alkaline solutions.

Explanation:

Not all metal oxides produce alkaline solutions when reacted with water, as the reaction depends on the properties of both the metal and its oxide. Most metal oxides are base anhydrides and will react with water to produce basic solutions, especially if the oxides are soluble and thus form metal hydroxides. However, this does not apply to metal oxides across the board. Some metal oxides have low oxidation states and are amphoteric or primarily acidic, meaning they can behave as either acids or bases depending on the conditions. For instance, metal oxides at lower oxidation states tend to react with aqueous acids forming solutions of salts and water rather than acting as bases. Oxides of metals with high oxidation states (4+ or more) such as vanadium(V) oxide and chromium(VI) oxide are acidic and will react with solutions of hydroxides to form salts and water, rather than producing alkaline solutions.

Learn more about Metal Oxides here:

https://brainly.com/question/35907323

#SPJ2

Sort the phrases based on whether they describe or give an example of diffusion, facilitated diffusion, both, or neither. note: if you answer any part of this question incorrectly, a single red x will appear indicating that one or more of the phrases are sorted incorrectly.

Answers

Question:

a. Diffusion

b. Facilitated diffusion

c. Both

d. Neither

1. movement to area of lower concentration

2. movement across a membrane

3. steroid transport into cell

4. requires energy

5. movement assisted by proteins

6. glucose transport into cell

   

Answer:

The sorting is as follows

a. (1)

b. (5 and 6)

c. (1 and 2)

d. (4)

Explanation:

Diffusion is the movement of particles across a membrane from a high concentration region to one with a lower concentration of the diffusing substance

Here we have the correct sorting as follows

a. Diffusion

3. steroid transport into cell

b. Facilitated diffusion

5. movement assisted by proteins

6. glucose transport into cell

c. Both

1. movement to area of lower concentration

2. movement across a membrane

d. Neither

4. requires energy

The eastfork forest contains pine trees, birch trees, and dogwood trees. All the trees in this forest are considered a(n) _____

Answers

Answer:

The answer is community

I got it correct

Explanation:

Answer:

community is the answer

Explanation:

Within a gas phase that is in contact with a liquid phase, molecules are moving randomly. These molecules are constantly entering into collisions with each other and with the liquid phase. The rate at which this occurs depends on the number of collisions which occur and this rate is _________________ to the partial pressure of the vapor.

Answers

Answer:

Directly Proportional

Explanation:

The partial pressure is defined as the pressure exerted by an individual gas that are present in a mixture as if it were alone in that particular system.

The kinetic molecular theory of gases is explained as the state of matter that is composed of tiny particles in constant motion even though there are distance between the colliding particles.They posses low density and Because of their nature gases can expansion and contraction of gas can be influenced under some condition.Unlike other fluid like liquids, the volume that gas usually occupied is empty space.

The gas particles are always in constant motion, and all the particles of the individual gases move and collide with one another and with the walls of the container they occupied. The magnitude of the gas pressure is been determined by the force with which they collide with one another.

Therefore,The rate at which collision occurs depends on the number of collisions which occur and this rate is directly proportional to the partial pressure of the vapor

Sea water, a solution composed of a variety of salts dissolved in water. The salt is the . Soda water, a solution composed of carbon dioxide gas dissolved in water. The water is the Air, a solution composed of 78% nitrogen and 21% oxygen. The nitrogen is the .

Answers

Answer:

In sea water;

The salt is the solute while the water is the solvent

In soda water;

The water is the solvent, the carbon dioxide is the solute

In air;

The nitrogen is the solvent while the oxygen and the other substances in small amounts are the solutes

Explanation:

A solution is a homogeneous mixture of two or more substances which includes a solvent and a solute. A solute in a solution is dissolved in the solvent of the solution.

Therefore, the solvent is the major part of a solution as it takes in the solvent to form the solution.

In sea water, a solution with a high concentration of salts

The salt is the solute while the water is the solvent

In soda water,  which is a mixture of CO₂ in water,

Here we have in the soda solution, the water is the solvent while the carbon dioxide is the solute

The water is the solvent, the carbon dioxide is the solute

Air a solution made up by a mixture of Nitrogen 78%, oxygen 21%, and small amount of water carbon dioxide and argon

The nitrogen is the solvent while the oxygen and the other substances in small amounts are the solutes.

Answer:

1)solute 2) sovolent 3) sovolent

Explanation:

edgyyy

An embankment is best defined as __________. A. the process of cutting down all of the trees and plant life in an area, with no care given to the sustainability of the forest B. the process of farming fish or other marine animals so they can be used as a food source C. a stretch of raised land, often built to help control flooding and the flow of a river D. gray or brown particles that cloud the air and that are caused by dust, smoke, or pollution Please select the best answer from the choices provided

Answers

Answer:

C. A stretch of raised land, often built to help control flooding and the flow of a river.

Explanation:

Embankments are made typically of construction adjacent to the river from spoil excavated from its bank.

What amount of water is formed when 20 ml of 0.80 m hcl and 30 ml of 0.40 m naoh are mixed?

Answers

Answer: The amount of water formed is 12 moles

Explanation: Please see the attachments below

0.216 g of water is formed.

According to the question,

The concentration of HCl and NaOH are:

→ [tex]CHCl = \frac{20\times 0.80}{50}[/tex]

             [tex]= 0.32 \ M[/tex]

→ [tex]CNaOH = \frac{30\times 0.40}{50}[/tex]

                  [tex]= 0.24 \ M[/tex]

Upon the reaction,

It will form 0.24 M of NaCl as well as 0.24 M of H₂O in 50 mL solution.

In 1000 mL,

→ [tex]1 M \ H_2O = 18 \g \ H_2O[/tex]

Now,

50 mL of 0.24 M H₂O will contain:

= [tex](18\times 0.24)\times \frac{50}{1000}[/tex]

= [tex]0.216 \ g[/tex] (water)

Thus the response above is right.

Learn more:

https://brainly.com/question/12450374

When limestone rock, which is principally calcium carbonate, is heated, a reaction occurs. If 11.7 g of carbon dioxide were produced in the lab from the decomposition of 30.7g of calcium carbonate, what is the percent yield for the reaction?

Answers

Answer: 86.7 %

Explanation:

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

a) moles of [tex]CaCO_3[/tex]

[tex]\text{Number of moles}=\frac{30.7g}{100g/mol}=0.307moles[/tex]

[tex]CaCO_3\rightarrow CaO+CO_2[/tex]

According to stoichiometry :

1 moles of [tex]CaCO_3[/tex] give = 1 mole of [tex]CO_2[/tex]

Thus 0.307 moles [tex]CaCO_3[/tex] give =[tex]\frac{1}{1}\times 0.307=0.307moles[/tex] of [tex]CO_2[/tex]

Mass of [tex]CO_2=moles\times {\text {Molar mass}}=0.307moles\times 44g/mol=13.5g[/tex]

[tex]\%\text{ yield }=\frac{\text{Actual yield}}{\text{Theoretical yield }}\times 100=\frac{11.7g}{13.5g}\times 100=86.7\%[/tex]

Therefore, the percent yield for the reaction is, 86.7%

Final answer:

The percent yield for the decomposition of calcium carbonate producing 11.7 g of carbon dioxide, from an initial 30.7 g of calcium carbonate, is calculated to be 86.5% through a step-by-step process involving molar mass and stoichiometry.

Explanation:

The question involves determining the percent yield for the reaction of heating limestone (calcium carbonate) to produce carbon dioxide.

Step-by-Step SolutionFirst, identify the chemical equation for the reaction: CaCO3(s) → CaO(s) + CO2(g).To find the theoretical yield of CO2, use the molar mass of CaCO3 and CO2. The molar mass of CaCO3 is 100.09 g/mol and CO2 is 44.01 g/mol.Calculate moles of CaCO3 used: 30.7 g / 100.09 g/mol = 0.307 moles of CaCO3. Since the reaction produces one mole of CO2 for every mole of CaCO3, the theoretical yield of CO2 is 0.307 moles.Transform moles of CO2 to grams: 0.307 moles x 44.01 g/mol = 13.52 grams theoretically produced.Calculate percent yield using the formula: (Actual Yield / Theoretical Yield) x 100. Therefore, (11.7 g / 13.52 g) x 100 = 86.5% percent yield.

This calculation demonstrates that the reaction had an 86.5% efficiency in producing carbon dioxide from calcium carbonate.

Select all (there's more than one) of the below chemicals that would be insoluble in water.
a
NH4OH

b
NaNO3

c
PbCrO4

d
SrSO4

e
K3PO4

f
AgClO4

g
HgCl2

h
FeCO3

i
NH4Br

j
Li2Cr2O7


Answers

FeCO₃ and PbCrO₄ is insoluble in water.

Explanation:

If any substance added to water and it form ions then it is soluble in water otherwise it is insoluble in water.

a. NH₄OH - soluble in water

b. NaNO₃ - soluble in water

C. PbCrO₄ is insoluble in water

d. SrSO₄ slightly soluble in water

e. K₃PO₄ - Soluble in water

f. AgClO₄- Highly Soluble in water

g. HgCl₂ - Slightly soluble in water

h. FeCO₃ -  insoluble in water

i. NH₄Br - soluble in water

j. Li₂Cr₂O₇ - soluble in water

1. Which of the following is the ideal gas law?

Answers

Answer:

PV = nRT

Explanation:

P=pressure

V=volume

n=amount of substance

R=ideal gas constant

T=temperature

What is double substitution

Answers

Answer:

In Tcl the words in a command are always exposed to two layers of interpretation: First, Tcl interprets them and prepares them as arguments to a routine. Second, the routine interprets those arguments according to its own principles. double substitution occurs when Tcl performs substitutions on original command and a routine then performs substitutions on the resulting arguments. Care is required in these cases to avoid errors, including vulnerability to injection attacks.

Explanation:

this probably wont help but here

Imagine it took 300 mL of 0.1 M LiOH to reach the first equivalence point and an additional 300 mL of 0.1 M LiOH (600 mL total) to reach the second equivalence point. How many moles of H2 were in the original acid solution

Answers

Answer:

0.03 mol H₂

Explanation:

In a diprotic acid titration, the first equivalence point relates to the equilibrium:

H₂A + OH⁻ ↔ HA⁻ + H₂O

And the second equivalence point to:

HA⁻ + OH⁻   ↔ A⁻² + H₂O

We can add those two equations and we're left with:

H₂A + 2OH ⁻ ↔ A⁻² + 2H₂O

So to calculate the moles of H₂ that were in the original acid solution we use the total volume used (in this case 600 mL).

600 mL ⇒ 600/1000 = 0.6 L

We calculate the moles of LiOH, using its molar concentration:

0.1 M * 0.6 L = 0.06 mol LiOH

And now we convert moles of LiOH (or OH⁻) to moles of H₂ using the  stoichiometric ratio:

0.06 mol LiOH * [tex]\frac{1molH_{2}A}{2molLiOH}[/tex] = 0.03 mol H₂

a strong acid, HA, is added to water. Which statement about the solution is true

Answers

I assume you mean HAt, and I don’t see any statements?

Answer:

C) It contains little or no HA.

Explanation:

In a demonstration of strong electrolytes, weak electrolytes, and nonelectrolytes, Professor Popsnorkle used a lightbulb apparatus that showed how much a solution conducted electricity by the brightness of the lightbulb. When pure water was tested, the bulb did not light. Then Professor Popsnorkle tested the following aqueous solutions. Which one caused the bulb to burn the brightest?
a. ethanol, CH3CH2OH
b. methanol, CH3OH
c. table salt, NaCl
d. table sugar, C12H22O11
e. acetic acid, CH3COOH

Answers

Final answer:

Among the substances tested, table salt (NaCl) is the one that caused the lightbulb to burn the brightest because it is a strong electrolyte that dissociates completely into ions in an aqueous solution, enabling efficient electrical conductivity.

Explanation:

In Professor Popsnorkle's demonstration of electrical conductivity in solutions, the substances tested included ethanol (CH3CH2OH), methanol (CH3OH), table salt (NaCl), table sugar (C12H22O11), and acetic acid (CH3COOH). To identify which substance caused the lightbulb to burn the brightest, we must understand that only solutions containing freely mobile, charged species—ions—can conduct electricity. Among the choices, table salt, or NaCl, when dissolved in water, dissociates into sodium ions (Na+) and chloride ions (Cl-), making it a strong electrolyte and allowing the solution to conduct electricity very well.

The other substances listed are either weak electrolytes or nonelectrolytes. Ethanol and table sugar are nonelectrolytes and do not contain dissolved ions, and thus they would not make the lightbulb shine brightly. Methanol is also a nonelectrolyte like ethanol. Acetic acid is a weak electrolyte because it only partially dissociates in solution. Therefore, table salt (NaCl) is the one that caused the bulb to burn the brightest due to its ability to completely dissociate into ions, which conducted the electrical current efficiently in the aqueous solution.

Two of the main dangers for the icebreaker ship Polarstern during their year-long stay in the frozen Arctic ocean are 1) the ship being crushed by the frozen ice and 2) polar bears. True False

Answers

Answer: True.

Explanation: Two icebreaker ship polarstern from Germany and the Akademik fedoeov from Russia sailed on a mission towards central Arctic. Their tasks were to find an ice floe so strong and thick it would ultimately freeze the polarstern, entrapping the ship for a whole year within the ice.

There is the danger of been attack by polar bears, because polar bears lives in the Arctic. And there is also the risk of the ship been crushed by frozen ice.

Question 1
20 pts
How many liters would you need to make a 0.7 M solution if you have 8.30 mol of
Potassium Chloride?

Answers

The answer for the following problem is mentioned below.

Therefore the volume of potassium chloride solution is 11.8 litres.

Explanation:

Given:

molarity of the potassium chloride solution (m) = 0.7 M

no of moles present in the potassium chloride solution (n) = 8.30 moles

To find:

volume of the potassium chloride solution (V)

We know;

m = [tex]\frac{n}{V}[/tex]

Where;

m represents the molarity of potassium chloride solution

n represents the no of moles of potassium chloride solution

V represents the volume of the solution

So;

0.7 = [tex]\frac{8.30}{V}[/tex]

V = 11.8 litres

Therefore the volume of potassium chloride solution is 11.8 litres.

hi um whats a single and double reaction

Answers

A single-replacement reaction is a chemical reaction in which one element is substituted for another element in a compound, generating a new element and a new compound as products.

A double-replacement reaction occurs when parts of two ionic compounds are exchanged, making two new compounds. A characteristic of a double-replacement equation is that there are two compounds as reactants and two different compounds as products.

The key difference between single displacement and double displacement reaction is that, in single displacement reactions, one chemical species replaces a part of another chemical species whereas, in double displacement reactions, exchange of two ionic species between two molecules occur.

Hope this helps you.

Answer:

A single-replacement reaction is a chemical reaction in which one element is substituted for another element in a compound, generating a new element and a new compound as products.

A fish is swimming at a constant rate towards the ocean floor. The equation
y=−7x−3
can be used to represent this situation, where
y
is the depth of the fish in meters below the sea level and
x
is the number of seconds the fish has been swimming. Which statement best describes the depth of the fish, given the situation?

Answers

A fish is swimming at a constant rate toward the ocean floor. The equation y = −7x − 3 can be used to represent this situation, where y is the depth of the fish in meters below sea level and x is the number of seconds the fish has been swimming. Which statement best describes the depth of the fish, given this equation?
From a starting position of 7 meters below sea level, the fish is descending 3 meters per second.
B From a starting position of 7 meters below sea level, the fish is ascending 3 meters per second.
C From a starting position of 3 meters below sea level, the fish is descending 7 meters per second

Answer: The answer is c

Explanation:

PLZ HELP
A chemist dissolves an ionic compound in water. The vapor pressure of the solution is _____. less than the vapor pressure of pure water equal to the vapor pressure of pure water greater than the vapor pressure of pure water

Answers

Answer is:

Less than the vapor pressure of pure water

The vapor pressure of a solution with a dissolved ionic compound is less than the vapor pressure of pure water. To determine the molecular formula of the compound Xy, calculate the moles of Xy using its total mass and molar mass, then find the subscript y for the number of Y atoms or groups present.

When a chemist dissolves an ionic compound in water, the vapor pressure of the solution is less than the vapor pressure of pure water. This phenomenon is explained by Raoult's law, which states that the vapor pressure of a solvent above a solution is lowered by the presence of a non-volatile solute. In the given question, after dissolving 110 g of substance Xy in 500 g of water, the vapor pressure drops from 17.5 mmHg to 15.0 mmHg. This decrease is due to the solute particles in the solution, which interfere with the evaporation process of the solvent (water) molecules.

To determine the molecular formula of the substance Xy, you first need to calculate the number of moles of Xy. Then, use the total mass of Xy and its molecular mass to find the number value of the subscript y in the molecular formula. Here's how the calculation is done:

Other Questions
3. Which of these two approaches to tax equity doyou find fairer: the ability-to-pay principle or thebenefits-received principle? Why? Cecil solved a theoretical prediction problem, where a spinner would be spun 30 times. She correctly concluded: The spinner will land on the red section 6 times. What could the spinner look like? Is there more than one possible solution? A company's common stock shares are expected to bring a 13 % return to their investors in case of "recession" state of the economy, 6 % return in case of "normal" state of the economy, and result in a 4 % loss in case of "boom" state of the economy. The probability of "boom" is 5 % and the probability of "recession" is 45 %. Calculate the expected rate of return on this company's common stock. After Annexation from the U.S., Texas laws regarding slavery becamea more restrictiveb. less restrictiveC. unimportantd. illegal The payroll register of Heritage Co. indicates $4,200 of social security withheld and $1,050 of Medicare tax withheld on total salaries of $70,000 for the period. Earnings of $12,000 are subject to state and federal unemployment compensation taxes at the federal rate of 0.8% and the state rate of 5.4%.Provide the journal entry to record the payroll tax expense for the period. If an amount box does not require an entry, leave it blank.a. Payroll Tax Expenseb. Social Security Tax Payablec. Medicare Tax Payabled. State Unemployment Tax Payable e. Federal Unemployment Tax Payable THE FIRST ANSWER WILL GET BRAINLIEST!! Nutrients from digested food enter the bloodstream through the process of (1) absorption (3) respiration (2) elimination (4) secretion i need the steps for 38 In the parable of the fig tree, the vinedresser wanted to destroy the barren tree.TrueFalse 7. Problems and Applications Q7 Your cousin Vinnie owns a painting company with fixed costs of $200 and the following schedule for variable costs: Quantity Variable Cost Average Fixed Cost Average Variable Cost Average Total Cost (Houses Painted per Month) (Dollars) (Dollars) (Dollars) (Dollars) 1 10 2 20 3 40 4 80 5 160 6 320 7 640 The efficient scale is houses. The source of the trouble appeared to be that Napoleon and Mr. Pilkington had each played an ace of spades simultaneously. Twelve voices were shouting in anger, and they were all alike. No question, now, what had happened to the faces of the pigs. The creatures outside looked from pig to man, and from man to pig, and from pig to man again; but already it was impossible to say which was which. Animal Farm, George Orwell How does Orwell use satirical techniques to develop the theme that ideals can be corrupted in practice? Check all that apply. In New York, a group called Cease PCB Dredging has tried to raise public awareness of the environmental problems posed by dredging the Hudson River. They hope this added awareness will put pressure on policy makers to stop this activity. Cease PCB Dredging is engaging in __________ lobbying. Group of answer choices inside indirect direct outside Please let me know which one it is ASAP thx financial calculator Bruno's Lunch Counter is expanding and expects operating cash flows of $23,900 a year for 5 years as a result. This expansion requires $66,000 in new fixed assets. These assets will be worthless at the end of the project. In addition, the project requires $5,600 of net working capital throughout the life of the project. What is the net present value of this expansion project at a required rate of return of 12 percent? After 1876, new ways of making chocolate caused a great increasein the number of people enjoying chocolate. Which two facts MOSTdirectly add up to that relationship?It became known that chocolate haschemicals in it that make people feelgood. Cocoa powder allowed people tocreate new types of chocolate treats.Cortez brought cases of cacao seeds tothe king of Spain. Daniel Peter createdmilk chocolate.Chocolate houses served chocolate tothose rich enough to afford it. Joseph Frycreated the first chocolate bar.Adding milk to chocolate made it lessbitter. The steam engine made it quickerand cheaper to produce chocolate. Which of the following are ways in which the media can influence the political process?Select one:A. televising debates between candidates B. all of these C. interviewing candidates about their policy positions D. publishing editorial content advocating a certain candidate or party Where was the battle between the bonhomme Richard and the Serapis fought? Justin plans to attend a four-year college. He hasestimated the costs per year.I Tuition = $2,900Justin's plan doesn't cover his costs completely. Whatare his options for covering the rest of his costs? Selectall that apply.He could try to save more money.He could get a student loan for the extra amount heneeds.Other educational expenses = $280Housing and living expenses = $4,100Justin's counselor estimates he will receive $3,500 ayear in grants. He also will be eligible for a work-studyprogram that pays $2,800 per year. Justin also plans tosave enough money to contribute $500 each year.He could apply for a scholarship.He could ask his friends to loan him money.He could ask his family to contribute. Write a loop to store the letters f through w in an array named letters. Then, print the contents of the array to the screen. A taxpayer understated the tax liability by $10,000. The total tax liability was $50,000. No disclosure of the return position was made by the taxpayer; however, the basis for the position is reasonable. How much of an accuracy-related penalty will the taxpayer be assessed?